freebsd-nq/sys/cam/ctl/ctl_backend_block.c

2807 lines
76 KiB
C
Raw Normal View History

Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
* Copyright (c) 2003 Silicon Graphics International Corp.
* Copyright (c) 2009-2011 Spectra Logic Corporation
* Copyright (c) 2012 The FreeBSD Foundation
* Copyright (c) 2014-2015 Alexander Motin <mav@FreeBSD.org>
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
* All rights reserved.
*
* Portions of this software were developed by Edward Tomasz Napierala
* under sponsorship from the FreeBSD Foundation.
*
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_backend_block.c#5 $
*/
/*
* CAM Target Layer driver backend for block devices.
*
* Author: Ken Merry <ken@FreeBSD.org>
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/types.h>
#include <sys/kthread.h>
#include <sys/bio.h>
#include <sys/fcntl.h>
#include <sys/limits.h>
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/malloc.h>
#include <sys/conf.h>
#include <sys/ioccom.h>
#include <sys/queue.h>
#include <sys/sbuf.h>
#include <sys/endian.h>
#include <sys/uio.h>
#include <sys/buf.h>
#include <sys/taskqueue.h>
#include <sys/vnode.h>
#include <sys/namei.h>
#include <sys/mount.h>
#include <sys/disk.h>
#include <sys/fcntl.h>
#include <sys/filedesc.h>
#include <sys/filio.h>
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
#include <sys/proc.h>
#include <sys/pcpu.h>
#include <sys/module.h>
#include <sys/sdt.h>
#include <sys/devicestat.h>
#include <sys/sysctl.h>
#include <sys/nv.h>
#include <sys/dnv.h>
#include <sys/sx.h>
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
#include <geom/geom.h>
#include <cam/cam.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_da.h>
#include <cam/ctl/ctl_io.h>
#include <cam/ctl/ctl.h>
#include <cam/ctl/ctl_backend.h>
#include <cam/ctl/ctl_ioctl.h>
#include <cam/ctl/ctl_ha.h>
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
#include <cam/ctl/ctl_scsi_all.h>
#include <cam/ctl/ctl_private.h>
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
#include <cam/ctl/ctl_error.h>
/*
* The idea here is that we'll allocate enough S/G space to hold a 1MB
* I/O. If we get an I/O larger than that, we'll split it.
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
*/
#define CTLBLK_HALF_IO_SIZE (512 * 1024)
#define CTLBLK_MAX_IO_SIZE (CTLBLK_HALF_IO_SIZE * 2)
#define CTLBLK_MIN_SEG (128 * 1024)
#define CTLBLK_MAX_SEG MIN(CTLBLK_HALF_IO_SIZE, maxphys)
#define CTLBLK_HALF_SEGS MAX(CTLBLK_HALF_IO_SIZE / CTLBLK_MIN_SEG, 1)
#define CTLBLK_MAX_SEGS (CTLBLK_HALF_SEGS * 2)
#define CTLBLK_NUM_SEGS (CTLBLK_MAX_IO_SIZE / CTLBLK_MAX_SEG)
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
#ifdef CTLBLK_DEBUG
#define DPRINTF(fmt, args...) \
printf("cbb(%s:%d): " fmt, __FUNCTION__, __LINE__, ##args)
#else
#define DPRINTF(fmt, args...) do {} while(0)
#endif
#define PRIV(io) \
((struct ctl_ptr_len_flags *)&(io)->io_hdr.ctl_private[CTL_PRIV_BACKEND])
#define ARGS(io) \
((struct ctl_lba_len_flags *)&(io)->io_hdr.ctl_private[CTL_PRIV_LBA_LEN])
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
SDT_PROVIDER_DEFINE(cbb);
typedef enum {
CTL_BE_BLOCK_LUN_UNCONFIGURED = 0x01,
CTL_BE_BLOCK_LUN_WAITING = 0x04,
} ctl_be_block_lun_flags;
typedef enum {
CTL_BE_BLOCK_NONE,
CTL_BE_BLOCK_DEV,
CTL_BE_BLOCK_FILE
} ctl_be_block_type;
struct ctl_be_block_filedata {
struct ucred *cred;
};
union ctl_be_block_bedata {
struct ctl_be_block_filedata file;
};
struct ctl_be_block_io;
struct ctl_be_block_lun;
typedef void (*cbb_dispatch_t)(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio);
typedef uint64_t (*cbb_getattr_t)(struct ctl_be_block_lun *be_lun,
const char *attrname);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* Backend LUN structure. There is a 1:1 mapping between a block device
* and a backend block LUN, and between a backend block LUN and a CTL LUN.
*/
struct ctl_be_block_lun {
struct ctl_be_lun cbe_lun; /* Must be first element. */
struct ctl_lun_create_params params;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
char *dev_path;
ctl_be_block_type dev_type;
struct vnode *vn;
union ctl_be_block_bedata backend;
cbb_dispatch_t dispatch;
cbb_dispatch_t lun_flush;
cbb_dispatch_t unmap;
cbb_dispatch_t get_lba_status;
cbb_getattr_t getattr;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
uint64_t size_blocks;
uint64_t size_bytes;
struct ctl_be_block_softc *softc;
struct devstat *disk_stats;
ctl_be_block_lun_flags flags;
SLIST_ENTRY(ctl_be_block_lun) links;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct taskqueue *io_taskqueue;
struct task io_task;
int num_threads;
STAILQ_HEAD(, ctl_io_hdr) input_queue;
STAILQ_HEAD(, ctl_io_hdr) config_read_queue;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
STAILQ_HEAD(, ctl_io_hdr) config_write_queue;
STAILQ_HEAD(, ctl_io_hdr) datamove_queue;
struct mtx_padalign io_lock;
struct mtx_padalign queue_lock;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
};
/*
* Overall softc structure for the block backend module.
*/
struct ctl_be_block_softc {
struct sx modify_lock;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct mtx lock;
int num_luns;
SLIST_HEAD(, ctl_be_block_lun) lun_list;
uma_zone_t beio_zone;
uma_zone_t bufmin_zone;
uma_zone_t bufmax_zone;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
};
static struct ctl_be_block_softc backend_block_softc;
/*
* Per-I/O information.
*/
struct ctl_be_block_io {
union ctl_io *io;
struct ctl_sg_entry sg_segs[CTLBLK_MAX_SEGS];
struct iovec xiovecs[CTLBLK_MAX_SEGS];
Implement zero-copy iSCSI target transmission/read. Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method can just reference the data buffer instead of immediately copying it. Extend the offload KPI with optional PDU queue method, allowing to specify completion callback, called when all the data referenced by above has been transferred and won't be accessed any more (the buffers can be freed). Implement the above functionality in software iSCSI driver using mbufs with external storage and reference counter. Note that some NICs (ixl(4)) may keep the mbuf in TX queue for a long time, so CTL has to be ready. Add optional method to struct ctl_scsiio for buffer reference counting. Implement it for CTL block backend, allowing to delay free of the struct ctl_be_block_io and memory it references as needed. In first reincarnation of the patch I tried to delay whole I/O as it is done for FibreChannel, that was cleaner, but due to the above callback delays I had to rewrite it this way to not leave LUN referenced potentially for hours or more. All together on sequential read from ZFS ARC this saves about 30% of CPU time and memory bandwidth by avoiding one of 3 memory copies (the other two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers). On tests with 2x Xeon Silver 4114 this allows to reach full line rate of 100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD, but expectations to saturate them are pretty high. ;) Discussed with: Chelsio Sponsored by: iXsystems, Inc.
2020-06-08 20:53:57 +00:00
int refcnt;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int bio_cmd;
int two_sglists;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int num_segs;
int num_bios_sent;
int num_bios_done;
int send_complete;
int first_error;
uint64_t first_error_offset;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct bintime ds_t0;
devstat_tag_type ds_tag_type;
devstat_trans_flags ds_trans_type;
uint64_t io_len;
uint64_t io_offset;
int io_arg;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct ctl_be_block_softc *softc;
struct ctl_be_block_lun *lun;
void (*beio_cont)(struct ctl_be_block_io *beio); /* to continue processing */
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
};
extern struct ctl_softc *control_softc;
static int cbb_num_threads = 32;
SYSCTL_NODE(_kern_cam_ctl, OID_AUTO, block, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
"CAM Target Layer Block Backend");
SYSCTL_INT(_kern_cam_ctl_block, OID_AUTO, num_threads, CTLFLAG_RWTUN,
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
&cbb_num_threads, 0, "Number of threads per backing file");
static struct ctl_be_block_io *ctl_alloc_beio(struct ctl_be_block_softc *softc);
static void ctl_free_beio(struct ctl_be_block_io *beio);
static void ctl_complete_beio(struct ctl_be_block_io *beio);
static int ctl_be_block_move_done(union ctl_io *io, bool samethr);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void ctl_be_block_biodone(struct bio *bio);
static void ctl_be_block_flush_file(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio);
static void ctl_be_block_dispatch_file(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio);
static void ctl_be_block_gls_file(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio);
static uint64_t ctl_be_block_getattr_file(struct ctl_be_block_lun *be_lun,
const char *attrname);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void ctl_be_block_flush_dev(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio);
static void ctl_be_block_unmap_dev(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void ctl_be_block_dispatch_dev(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio);
static uint64_t ctl_be_block_getattr_dev(struct ctl_be_block_lun *be_lun,
const char *attrname);
static void ctl_be_block_cr_dispatch(struct ctl_be_block_lun *be_lun,
union ctl_io *io);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void ctl_be_block_cw_dispatch(struct ctl_be_block_lun *be_lun,
union ctl_io *io);
static void ctl_be_block_dispatch(struct ctl_be_block_lun *be_lun,
union ctl_io *io);
static void ctl_be_block_worker(void *context, int pending);
static int ctl_be_block_submit(union ctl_io *io);
static int ctl_be_block_ioctl(struct cdev *dev, u_long cmd, caddr_t addr,
int flag, struct thread *td);
static int ctl_be_block_open_file(struct ctl_be_block_lun *be_lun,
struct ctl_lun_req *req);
static int ctl_be_block_open_dev(struct ctl_be_block_lun *be_lun,
struct ctl_lun_req *req);
static int ctl_be_block_close(struct ctl_be_block_lun *be_lun);
static int ctl_be_block_open(struct ctl_be_block_lun *be_lun,
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct ctl_lun_req *req);
static int ctl_be_block_create(struct ctl_be_block_softc *softc,
struct ctl_lun_req *req);
static int ctl_be_block_rm(struct ctl_be_block_softc *softc,
struct ctl_lun_req *req);
static int ctl_be_block_modify(struct ctl_be_block_softc *softc,
struct ctl_lun_req *req);
static void ctl_be_block_lun_shutdown(struct ctl_be_lun *cbe_lun);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static int ctl_be_block_config_write(union ctl_io *io);
static int ctl_be_block_config_read(union ctl_io *io);
static int ctl_be_block_lun_info(struct ctl_be_lun *cbe_lun, struct sbuf *sb);
static uint64_t ctl_be_block_lun_attr(struct ctl_be_lun *cbe_lun, const char *attrname);
static int ctl_be_block_init(void);
static int ctl_be_block_shutdown(void);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static struct ctl_backend_driver ctl_be_block_driver =
{
.name = "block",
.flags = CTL_BE_FLAG_HAS_CONFIG,
.init = ctl_be_block_init,
.shutdown = ctl_be_block_shutdown,
.data_submit = ctl_be_block_submit,
.config_read = ctl_be_block_config_read,
.config_write = ctl_be_block_config_write,
.ioctl = ctl_be_block_ioctl,
.lun_info = ctl_be_block_lun_info,
.lun_attr = ctl_be_block_lun_attr
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
};
MALLOC_DEFINE(M_CTLBLK, "ctlblock", "Memory used for CTL block backend");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
CTL_BACKEND_DECLARE(cbb, ctl_be_block_driver);
static void
ctl_alloc_seg(struct ctl_be_block_softc *softc, struct ctl_sg_entry *sg,
size_t len)
{
if (len <= CTLBLK_MIN_SEG) {
sg->addr = uma_zalloc(softc->bufmin_zone, M_WAITOK);
} else {
KASSERT(len <= CTLBLK_MAX_SEG,
("Too large alloc %zu > %lu", len, CTLBLK_MAX_SEG));
sg->addr = uma_zalloc(softc->bufmax_zone, M_WAITOK);
}
sg->len = len;
}
static void
ctl_free_seg(struct ctl_be_block_softc *softc, struct ctl_sg_entry *sg)
{
if (sg->len <= CTLBLK_MIN_SEG) {
uma_zfree(softc->bufmin_zone, sg->addr);
} else {
KASSERT(sg->len <= CTLBLK_MAX_SEG,
("Too large free %zu > %lu", sg->len, CTLBLK_MAX_SEG));
uma_zfree(softc->bufmax_zone, sg->addr);
}
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static struct ctl_be_block_io *
ctl_alloc_beio(struct ctl_be_block_softc *softc)
{
struct ctl_be_block_io *beio;
beio = uma_zalloc(softc->beio_zone, M_WAITOK | M_ZERO);
beio->softc = softc;
Implement zero-copy iSCSI target transmission/read. Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method can just reference the data buffer instead of immediately copying it. Extend the offload KPI with optional PDU queue method, allowing to specify completion callback, called when all the data referenced by above has been transferred and won't be accessed any more (the buffers can be freed). Implement the above functionality in software iSCSI driver using mbufs with external storage and reference counter. Note that some NICs (ixl(4)) may keep the mbuf in TX queue for a long time, so CTL has to be ready. Add optional method to struct ctl_scsiio for buffer reference counting. Implement it for CTL block backend, allowing to delay free of the struct ctl_be_block_io and memory it references as needed. In first reincarnation of the patch I tried to delay whole I/O as it is done for FibreChannel, that was cleaner, but due to the above callback delays I had to rewrite it this way to not leave LUN referenced potentially for hours or more. All together on sequential read from ZFS ARC this saves about 30% of CPU time and memory bandwidth by avoiding one of 3 memory copies (the other two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers). On tests with 2x Xeon Silver 4114 this allows to reach full line rate of 100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD, but expectations to saturate them are pretty high. ;) Discussed with: Chelsio Sponsored by: iXsystems, Inc.
2020-06-08 20:53:57 +00:00
beio->refcnt = 1;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (beio);
}
static void
Implement zero-copy iSCSI target transmission/read. Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method can just reference the data buffer instead of immediately copying it. Extend the offload KPI with optional PDU queue method, allowing to specify completion callback, called when all the data referenced by above has been transferred and won't be accessed any more (the buffers can be freed). Implement the above functionality in software iSCSI driver using mbufs with external storage and reference counter. Note that some NICs (ixl(4)) may keep the mbuf in TX queue for a long time, so CTL has to be ready. Add optional method to struct ctl_scsiio for buffer reference counting. Implement it for CTL block backend, allowing to delay free of the struct ctl_be_block_io and memory it references as needed. In first reincarnation of the patch I tried to delay whole I/O as it is done for FibreChannel, that was cleaner, but due to the above callback delays I had to rewrite it this way to not leave LUN referenced potentially for hours or more. All together on sequential read from ZFS ARC this saves about 30% of CPU time and memory bandwidth by avoiding one of 3 memory copies (the other two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers). On tests with 2x Xeon Silver 4114 this allows to reach full line rate of 100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD, but expectations to saturate them are pretty high. ;) Discussed with: Chelsio Sponsored by: iXsystems, Inc.
2020-06-08 20:53:57 +00:00
ctl_real_free_beio(struct ctl_be_block_io *beio)
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
{
struct ctl_be_block_softc *softc = beio->softc;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int i;
for (i = 0; i < beio->num_segs; i++) {
ctl_free_seg(softc, &beio->sg_segs[i]);
/* For compare we had two equal S/G lists. */
if (beio->two_sglists) {
ctl_free_seg(softc,
&beio->sg_segs[i + CTLBLK_HALF_SEGS]);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
uma_zfree(softc->beio_zone, beio);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
Implement zero-copy iSCSI target transmission/read. Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method can just reference the data buffer instead of immediately copying it. Extend the offload KPI with optional PDU queue method, allowing to specify completion callback, called when all the data referenced by above has been transferred and won't be accessed any more (the buffers can be freed). Implement the above functionality in software iSCSI driver using mbufs with external storage and reference counter. Note that some NICs (ixl(4)) may keep the mbuf in TX queue for a long time, so CTL has to be ready. Add optional method to struct ctl_scsiio for buffer reference counting. Implement it for CTL block backend, allowing to delay free of the struct ctl_be_block_io and memory it references as needed. In first reincarnation of the patch I tried to delay whole I/O as it is done for FibreChannel, that was cleaner, but due to the above callback delays I had to rewrite it this way to not leave LUN referenced potentially for hours or more. All together on sequential read from ZFS ARC this saves about 30% of CPU time and memory bandwidth by avoiding one of 3 memory copies (the other two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers). On tests with 2x Xeon Silver 4114 this allows to reach full line rate of 100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD, but expectations to saturate them are pretty high. ;) Discussed with: Chelsio Sponsored by: iXsystems, Inc.
2020-06-08 20:53:57 +00:00
static void
ctl_refcnt_beio(void *arg, int diff)
{
struct ctl_be_block_io *beio = arg;
if (atomic_fetchadd_int(&beio->refcnt, diff) + diff == 0)
ctl_real_free_beio(beio);
}
static void
ctl_free_beio(struct ctl_be_block_io *beio)
{
ctl_refcnt_beio(beio, -1);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_complete_beio(struct ctl_be_block_io *beio)
{
union ctl_io *io = beio->io;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (beio->beio_cont != NULL) {
beio->beio_cont(beio);
} else {
ctl_free_beio(beio);
ctl_data_submit_done(io);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
static size_t
cmp(uint8_t *a, uint8_t *b, size_t size)
{
size_t i;
for (i = 0; i < size; i++) {
if (a[i] != b[i])
break;
}
return (i);
}
static void
ctl_be_block_compare(union ctl_io *io)
{
struct ctl_be_block_io *beio;
uint64_t off, res;
int i;
uint8_t info[8];
beio = (struct ctl_be_block_io *)PRIV(io)->ptr;
off = 0;
for (i = 0; i < beio->num_segs; i++) {
res = cmp(beio->sg_segs[i].addr,
beio->sg_segs[i + CTLBLK_HALF_SEGS].addr,
beio->sg_segs[i].len);
off += res;
if (res < beio->sg_segs[i].len)
break;
}
if (i < beio->num_segs) {
scsi_u64to8b(off, info);
ctl_set_sense(&io->scsiio, /*current_error*/ 1,
/*sense_key*/ SSD_KEY_MISCOMPARE,
/*asc*/ 0x1D, /*ascq*/ 0x00,
/*type*/ SSD_ELEM_INFO,
/*size*/ sizeof(info), /*data*/ &info,
/*type*/ SSD_ELEM_NONE);
} else
ctl_set_success(&io->scsiio);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static int
ctl_be_block_move_done(union ctl_io *io, bool samethr)
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
{
struct ctl_be_block_io *beio;
struct ctl_be_block_lun *be_lun;
struct ctl_lba_len_flags *lbalen;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
beio = (struct ctl_be_block_io *)PRIV(io)->ptr;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DPRINTF("entered\n");
io->scsiio.kern_rel_offset += io->scsiio.kern_data_len;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* We set status at this point for read and compare commands.
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
*/
if ((io->io_hdr.flags & CTL_FLAG_ABORT) == 0 &&
(io->io_hdr.status & CTL_STATUS_MASK) == CTL_STATUS_NONE) {
lbalen = ARGS(io);
if (lbalen->flags & CTL_LLF_READ) {
ctl_set_success(&io->scsiio);
} else if (lbalen->flags & CTL_LLF_COMPARE) {
/* We have two data blocks ready for comparison. */
ctl_be_block_compare(io);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
/*
* If this is a read, or a write with errors, it is done.
*/
if ((beio->bio_cmd == BIO_READ)
|| ((io->io_hdr.flags & CTL_FLAG_ABORT) != 0)
|| ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_STATUS_NONE)) {
ctl_complete_beio(beio);
return (0);
}
/*
* At this point, we have a write and the DMA completed successfully.
* If we were called synchronously in the original thread then just
* dispatch, otherwise we now have to queue it to the task queue to
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
* execute the backend I/O. That is because we do blocking
* memory allocations, and in the file backing case, blocking I/O.
* This move done routine is generally called in the SIM's
* interrupt context, and therefore we cannot block.
*/
be_lun = (struct ctl_be_block_lun *)CTL_BACKEND_LUN(io);
if (samethr) {
be_lun->dispatch(be_lun, beio);
} else {
mtx_lock(&be_lun->queue_lock);
STAILQ_INSERT_TAIL(&be_lun->datamove_queue, &io->io_hdr, links);
mtx_unlock(&be_lun->queue_lock);
taskqueue_enqueue(be_lun->io_taskqueue, &be_lun->io_task);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (0);
}
static void
ctl_be_block_biodone(struct bio *bio)
{
struct ctl_be_block_io *beio = bio->bio_caller1;
struct ctl_be_block_lun *be_lun = beio->lun;
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
union ctl_io *io;
int error;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
io = beio->io;
DPRINTF("entered\n");
error = bio->bio_error;
mtx_lock(&be_lun->io_lock);
if (error != 0 &&
(beio->first_error == 0 ||
bio->bio_offset < beio->first_error_offset)) {
beio->first_error = error;
beio->first_error_offset = bio->bio_offset;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
beio->num_bios_done++;
/*
* XXX KDM will this cause WITNESS to complain? Holding a lock
* during the free might cause it to complain.
*/
g_destroy_bio(bio);
/*
* If the send complete bit isn't set, or we aren't the last I/O to
* complete, then we're done.
*/
if ((beio->send_complete == 0)
|| (beio->num_bios_done < beio->num_bios_sent)) {
mtx_unlock(&be_lun->io_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return;
}
/*
* At this point, we've verified that we are the last I/O to
* complete, so it's safe to drop the lock.
*/
devstat_end_transaction(beio->lun->disk_stats, beio->io_len,
beio->ds_tag_type, beio->ds_trans_type,
/*now*/ NULL, /*then*/&beio->ds_t0);
mtx_unlock(&be_lun->io_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* If there are any errors from the backing device, we fail the
* entire I/O with a medium error.
*/
error = beio->first_error;
if (error != 0) {
if (error == EOPNOTSUPP) {
ctl_set_invalid_opcode(&io->scsiio);
} else if (error == ENOSPC || error == EDQUOT) {
ctl_set_space_alloc_fail(&io->scsiio);
2015-09-13 16:49:41 +00:00
} else if (error == EROFS || error == EACCES) {
ctl_set_hw_write_protected(&io->scsiio);
} else if (beio->bio_cmd == BIO_FLUSH) {
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/* XXX KDM is there is a better error here? */
ctl_set_internal_failure(&io->scsiio,
/*sks_valid*/ 1,
/*retry_count*/ 0xbad2);
} else {
ctl_set_medium_error(&io->scsiio,
beio->bio_cmd == BIO_READ);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_complete_beio(beio);
return;
}
/*
* If this is a write, a flush, a delete or verify, we're all done.
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
* If this is a read, we can now send the data to the user.
*/
if ((beio->bio_cmd == BIO_WRITE)
|| (beio->bio_cmd == BIO_FLUSH)
|| (beio->bio_cmd == BIO_DELETE)
|| (ARGS(io)->flags & CTL_LLF_VERIFY)) {
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_set_success(&io->scsiio);
ctl_complete_beio(beio);
} else {
if ((ARGS(io)->flags & CTL_LLF_READ) &&
beio->beio_cont == NULL) {
ctl_set_success(&io->scsiio);
if (cbe_lun->serseq >= CTL_LUN_SERSEQ_SOFT)
ctl_serseq_done(io);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_datamove(io);
}
}
static void
ctl_be_block_flush_file(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
union ctl_io *io = beio->io;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct mount *mountpoint;
int error;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DPRINTF("entered\n");
binuptime(&beio->ds_t0);
devstat_start_transaction(beio->lun->disk_stats, &beio->ds_t0);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
(void) vn_start_write(be_lun->vn, &mountpoint, V_WAIT);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
vn_lock(be_lun->vn, vn_lktype_write(mountpoint, be_lun->vn) |
LK_RETRY);
error = VOP_FSYNC(be_lun->vn, beio->io_arg ? MNT_NOWAIT : MNT_WAIT,
curthread);
VOP_UNLOCK(be_lun->vn);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
vn_finished_write(mountpoint);
mtx_lock(&be_lun->io_lock);
devstat_end_transaction(beio->lun->disk_stats, beio->io_len,
beio->ds_tag_type, beio->ds_trans_type,
/*now*/ NULL, /*then*/&beio->ds_t0);
mtx_unlock(&be_lun->io_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (error == 0)
ctl_set_success(&io->scsiio);
else {
/* XXX KDM is there is a better error here? */
ctl_set_internal_failure(&io->scsiio,
/*sks_valid*/ 1,
/*retry_count*/ 0xbad1);
}
ctl_complete_beio(beio);
}
SDT_PROBE_DEFINE1(cbb, , read, file_start, "uint64_t");
SDT_PROBE_DEFINE1(cbb, , write, file_start, "uint64_t");
SDT_PROBE_DEFINE1(cbb, , read, file_done,"uint64_t");
SDT_PROBE_DEFINE1(cbb, , write, file_done, "uint64_t");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_be_block_dispatch_file(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct ctl_be_block_filedata *file_data;
union ctl_io *io;
struct uio xuio;
struct iovec *xiovec;
size_t s;
int error, flags, i;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DPRINTF("entered\n");
file_data = &be_lun->backend.file;
io = beio->io;
flags = 0;
if (ARGS(io)->flags & CTL_LLF_DPO)
flags |= IO_DIRECT;
if (beio->bio_cmd == BIO_WRITE && ARGS(io)->flags & CTL_LLF_FUA)
flags |= IO_SYNC;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
bzero(&xuio, sizeof(xuio));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (beio->bio_cmd == BIO_READ) {
SDT_PROBE0(cbb, , read, file_start);
xuio.uio_rw = UIO_READ;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else {
SDT_PROBE0(cbb, , write, file_start);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
xuio.uio_rw = UIO_WRITE;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
xuio.uio_offset = beio->io_offset;
xuio.uio_resid = beio->io_len;
xuio.uio_segflg = UIO_SYSSPACE;
xuio.uio_iov = beio->xiovecs;
xuio.uio_iovcnt = beio->num_segs;
xuio.uio_td = curthread;
for (i = 0, xiovec = xuio.uio_iov; i < xuio.uio_iovcnt; i++, xiovec++) {
xiovec->iov_base = beio->sg_segs[i].addr;
xiovec->iov_len = beio->sg_segs[i].len;
}
binuptime(&beio->ds_t0);
devstat_start_transaction(beio->lun->disk_stats, &beio->ds_t0);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (beio->bio_cmd == BIO_READ) {
vn_lock(be_lun->vn, LK_SHARED | LK_RETRY);
if (beio->beio_cont == NULL &&
cbe_lun->serseq == CTL_LUN_SERSEQ_SOFT)
ctl_serseq_done(io);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* UFS pays attention to IO_DIRECT for reads. If the
* DIRECTIO option is configured into the kernel, it calls
* ffs_rawread(). But that only works for single-segment
* uios with user space addresses. In our case, with a
* kernel uio, it still reads into the buffer cache, but it
* will just try to release the buffer from the cache later
* on in ffs_read().
*
* ZFS does not pay attention to IO_DIRECT for reads.
*
* UFS does not pay attention to IO_SYNC for reads.
*
* ZFS pays attention to IO_SYNC (which translates into the
* Solaris define FRSYNC for zfs_read()) for reads. It
* attempts to sync the file before reading.
*/
error = VOP_READ(be_lun->vn, &xuio, flags, file_data->cred);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
VOP_UNLOCK(be_lun->vn);
SDT_PROBE0(cbb, , read, file_done);
if (error == 0 && xuio.uio_resid > 0) {
/*
* If we red less then requested (EOF), then
* we should clean the rest of the buffer.
*/
s = beio->io_len - xuio.uio_resid;
for (i = 0; i < beio->num_segs; i++) {
if (s >= beio->sg_segs[i].len) {
s -= beio->sg_segs[i].len;
continue;
}
bzero((uint8_t *)beio->sg_segs[i].addr + s,
beio->sg_segs[i].len - s);
s = 0;
}
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else {
struct mount *mountpoint;
(void)vn_start_write(be_lun->vn, &mountpoint, V_WAIT);
vn_lock(be_lun->vn, vn_lktype_write(mountpoint,
be_lun->vn) | LK_RETRY);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* UFS pays attention to IO_DIRECT for writes. The write
* is done asynchronously. (Normally the write would just
* get put into cache.
*
* UFS pays attention to IO_SYNC for writes. It will
* attempt to write the buffer out synchronously if that
* flag is set.
*
* ZFS does not pay attention to IO_DIRECT for writes.
*
* ZFS pays attention to IO_SYNC (a.k.a. FSYNC or FRSYNC)
* for writes. It will flush the transaction from the
* cache before returning.
*/
error = VOP_WRITE(be_lun->vn, &xuio, flags, file_data->cred);
VOP_UNLOCK(be_lun->vn);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
vn_finished_write(mountpoint);
SDT_PROBE0(cbb, , write, file_done);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
mtx_lock(&be_lun->io_lock);
devstat_end_transaction(beio->lun->disk_stats, beio->io_len,
beio->ds_tag_type, beio->ds_trans_type,
/*now*/ NULL, /*then*/&beio->ds_t0);
mtx_unlock(&be_lun->io_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* If we got an error, set the sense data to "MEDIUM ERROR" and
* return the I/O to the user.
*/
if (error != 0) {
if (error == ENOSPC || error == EDQUOT) {
ctl_set_space_alloc_fail(&io->scsiio);
2015-09-13 16:49:41 +00:00
} else if (error == EROFS || error == EACCES) {
ctl_set_hw_write_protected(&io->scsiio);
} else {
ctl_set_medium_error(&io->scsiio,
beio->bio_cmd == BIO_READ);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_complete_beio(beio);
return;
}
/*
* If this is a write or a verify, we're all done.
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
* If this is a read, we can now send the data to the user.
*/
if ((beio->bio_cmd == BIO_WRITE) ||
(ARGS(io)->flags & CTL_LLF_VERIFY)) {
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_set_success(&io->scsiio);
ctl_complete_beio(beio);
} else {
if ((ARGS(io)->flags & CTL_LLF_READ) &&
beio->beio_cont == NULL) {
ctl_set_success(&io->scsiio);
if (cbe_lun->serseq > CTL_LUN_SERSEQ_SOFT)
ctl_serseq_done(io);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_datamove(io);
}
}
static void
ctl_be_block_gls_file(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
union ctl_io *io = beio->io;
struct ctl_lba_len_flags *lbalen = ARGS(io);
struct scsi_get_lba_status_data *data;
off_t roff, off;
int error, status;
DPRINTF("entered\n");
off = roff = ((off_t)lbalen->lba) * be_lun->cbe_lun.blocksize;
vn_lock(be_lun->vn, LK_SHARED | LK_RETRY);
error = VOP_IOCTL(be_lun->vn, FIOSEEKHOLE, &off,
0, curthread->td_ucred, curthread);
if (error == 0 && off > roff)
status = 0; /* mapped up to off */
else {
error = VOP_IOCTL(be_lun->vn, FIOSEEKDATA, &off,
0, curthread->td_ucred, curthread);
if (error == 0 && off > roff)
status = 1; /* deallocated up to off */
else {
status = 0; /* unknown up to the end */
off = be_lun->size_bytes;
}
}
VOP_UNLOCK(be_lun->vn);
data = (struct scsi_get_lba_status_data *)io->scsiio.kern_data_ptr;
scsi_u64to8b(lbalen->lba, data->descr[0].addr);
scsi_ulto4b(MIN(UINT32_MAX, off / be_lun->cbe_lun.blocksize -
lbalen->lba), data->descr[0].length);
data->descr[0].status = status;
ctl_complete_beio(beio);
}
static uint64_t
ctl_be_block_getattr_file(struct ctl_be_block_lun *be_lun, const char *attrname)
{
struct vattr vattr;
struct statfs statfs;
uint64_t val;
int error;
val = UINT64_MAX;
if (be_lun->vn == NULL)
return (val);
vn_lock(be_lun->vn, LK_SHARED | LK_RETRY);
if (strcmp(attrname, "blocksused") == 0) {
error = VOP_GETATTR(be_lun->vn, &vattr, curthread->td_ucred);
if (error == 0)
val = vattr.va_bytes / be_lun->cbe_lun.blocksize;
}
if (strcmp(attrname, "blocksavail") == 0 &&
!VN_IS_DOOMED(be_lun->vn)) {
error = VFS_STATFS(be_lun->vn->v_mount, &statfs);
if (error == 0)
2015-08-15 18:22:16 +00:00
val = statfs.f_bavail * statfs.f_bsize /
be_lun->cbe_lun.blocksize;
}
VOP_UNLOCK(be_lun->vn);
return (val);
}
static void
ctl_be_block_dispatch_zvol(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
union ctl_io *io;
struct cdevsw *csw;
struct cdev *dev;
struct uio xuio;
struct iovec *xiovec;
int error, flags, i, ref;
DPRINTF("entered\n");
io = beio->io;
flags = 0;
if (ARGS(io)->flags & CTL_LLF_DPO)
flags |= IO_DIRECT;
if (beio->bio_cmd == BIO_WRITE && ARGS(io)->flags & CTL_LLF_FUA)
flags |= IO_SYNC;
bzero(&xuio, sizeof(xuio));
if (beio->bio_cmd == BIO_READ) {
SDT_PROBE0(cbb, , read, file_start);
xuio.uio_rw = UIO_READ;
} else {
SDT_PROBE0(cbb, , write, file_start);
xuio.uio_rw = UIO_WRITE;
}
xuio.uio_offset = beio->io_offset;
xuio.uio_resid = beio->io_len;
xuio.uio_segflg = UIO_SYSSPACE;
xuio.uio_iov = beio->xiovecs;
xuio.uio_iovcnt = beio->num_segs;
xuio.uio_td = curthread;
for (i = 0, xiovec = xuio.uio_iov; i < xuio.uio_iovcnt; i++, xiovec++) {
xiovec->iov_base = beio->sg_segs[i].addr;
xiovec->iov_len = beio->sg_segs[i].len;
}
binuptime(&beio->ds_t0);
devstat_start_transaction(beio->lun->disk_stats, &beio->ds_t0);
csw = devvn_refthread(be_lun->vn, &dev, &ref);
if (csw) {
if (beio->bio_cmd == BIO_READ) {
if (beio->beio_cont == NULL &&
cbe_lun->serseq == CTL_LUN_SERSEQ_SOFT)
ctl_serseq_done(io);
error = csw->d_read(dev, &xuio, flags);
} else
error = csw->d_write(dev, &xuio, flags);
dev_relthread(dev, ref);
} else
error = ENXIO;
if (beio->bio_cmd == BIO_READ)
SDT_PROBE0(cbb, , read, file_done);
else
SDT_PROBE0(cbb, , write, file_done);
mtx_lock(&be_lun->io_lock);
devstat_end_transaction(beio->lun->disk_stats, beio->io_len,
beio->ds_tag_type, beio->ds_trans_type,
/*now*/ NULL, /*then*/&beio->ds_t0);
mtx_unlock(&be_lun->io_lock);
/*
* If we got an error, set the sense data to "MEDIUM ERROR" and
* return the I/O to the user.
*/
if (error != 0) {
if (error == ENOSPC || error == EDQUOT) {
ctl_set_space_alloc_fail(&io->scsiio);
2015-09-13 16:49:41 +00:00
} else if (error == EROFS || error == EACCES) {
ctl_set_hw_write_protected(&io->scsiio);
} else {
ctl_set_medium_error(&io->scsiio,
beio->bio_cmd == BIO_READ);
}
ctl_complete_beio(beio);
return;
}
/*
* If this is a write or a verify, we're all done.
* If this is a read, we can now send the data to the user.
*/
if ((beio->bio_cmd == BIO_WRITE) ||
(ARGS(io)->flags & CTL_LLF_VERIFY)) {
ctl_set_success(&io->scsiio);
ctl_complete_beio(beio);
} else {
if ((ARGS(io)->flags & CTL_LLF_READ) &&
beio->beio_cont == NULL) {
ctl_set_success(&io->scsiio);
if (cbe_lun->serseq > CTL_LUN_SERSEQ_SOFT)
ctl_serseq_done(io);
}
ctl_datamove(io);
}
}
static void
ctl_be_block_gls_zvol(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
union ctl_io *io = beio->io;
struct cdevsw *csw;
struct cdev *dev;
struct ctl_lba_len_flags *lbalen = ARGS(io);
struct scsi_get_lba_status_data *data;
off_t roff, off;
int error, ref, status;
DPRINTF("entered\n");
csw = devvn_refthread(be_lun->vn, &dev, &ref);
if (csw == NULL) {
status = 0; /* unknown up to the end */
off = be_lun->size_bytes;
goto done;
}
off = roff = ((off_t)lbalen->lba) * be_lun->cbe_lun.blocksize;
error = csw->d_ioctl(dev, FIOSEEKHOLE, (caddr_t)&off, FREAD,
curthread);
if (error == 0 && off > roff)
status = 0; /* mapped up to off */
else {
error = csw->d_ioctl(dev, FIOSEEKDATA, (caddr_t)&off, FREAD,
curthread);
if (error == 0 && off > roff)
status = 1; /* deallocated up to off */
else {
status = 0; /* unknown up to the end */
off = be_lun->size_bytes;
}
}
dev_relthread(dev, ref);
done:
data = (struct scsi_get_lba_status_data *)io->scsiio.kern_data_ptr;
scsi_u64to8b(lbalen->lba, data->descr[0].addr);
scsi_ulto4b(MIN(UINT32_MAX, off / be_lun->cbe_lun.blocksize -
lbalen->lba), data->descr[0].length);
data->descr[0].status = status;
ctl_complete_beio(beio);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_be_block_flush_dev(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
struct bio *bio;
struct cdevsw *csw;
struct cdev *dev;
int ref;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DPRINTF("entered\n");
/* This can't fail, it's a blocking allocation. */
bio = g_alloc_bio();
bio->bio_cmd = BIO_FLUSH;
bio->bio_offset = 0;
bio->bio_data = 0;
bio->bio_done = ctl_be_block_biodone;
bio->bio_caller1 = beio;
bio->bio_pblkno = 0;
/*
* We don't need to acquire the LUN lock here, because we are only
* sending one bio, and so there is no other context to synchronize
* with.
*/
beio->num_bios_sent = 1;
beio->send_complete = 1;
binuptime(&beio->ds_t0);
devstat_start_transaction(be_lun->disk_stats, &beio->ds_t0);
csw = devvn_refthread(be_lun->vn, &dev, &ref);
if (csw) {
bio->bio_dev = dev;
csw->d_strategy(bio);
dev_relthread(dev, ref);
} else {
bio->bio_error = ENXIO;
ctl_be_block_biodone(bio);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
static void
ctl_be_block_unmap_dev_range(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio,
uint64_t off, uint64_t len, int last)
{
struct bio *bio;
uint64_t maxlen;
struct cdevsw *csw;
struct cdev *dev;
int ref;
csw = devvn_refthread(be_lun->vn, &dev, &ref);
maxlen = LONG_MAX - (LONG_MAX % be_lun->cbe_lun.blocksize);
while (len > 0) {
bio = g_alloc_bio();
bio->bio_cmd = BIO_DELETE;
bio->bio_dev = dev;
bio->bio_offset = off;
bio->bio_length = MIN(len, maxlen);
bio->bio_data = 0;
bio->bio_done = ctl_be_block_biodone;
bio->bio_caller1 = beio;
bio->bio_pblkno = off / be_lun->cbe_lun.blocksize;
off += bio->bio_length;
len -= bio->bio_length;
mtx_lock(&be_lun->io_lock);
beio->num_bios_sent++;
if (last && len == 0)
beio->send_complete = 1;
mtx_unlock(&be_lun->io_lock);
if (csw) {
csw->d_strategy(bio);
} else {
bio->bio_error = ENXIO;
ctl_be_block_biodone(bio);
}
}
if (csw)
dev_relthread(dev, ref);
}
static void
ctl_be_block_unmap_dev(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
union ctl_io *io;
struct ctl_ptr_len_flags *ptrlen;
struct scsi_unmap_desc *buf, *end;
uint64_t len;
io = beio->io;
DPRINTF("entered\n");
binuptime(&beio->ds_t0);
devstat_start_transaction(be_lun->disk_stats, &beio->ds_t0);
if (beio->io_offset == -1) {
beio->io_len = 0;
ptrlen = (struct ctl_ptr_len_flags *)&io->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
buf = (struct scsi_unmap_desc *)ptrlen->ptr;
end = buf + ptrlen->len / sizeof(*buf);
for (; buf < end; buf++) {
len = (uint64_t)scsi_4btoul(buf->length) *
be_lun->cbe_lun.blocksize;
beio->io_len += len;
ctl_be_block_unmap_dev_range(be_lun, beio,
scsi_8btou64(buf->lba) * be_lun->cbe_lun.blocksize,
len, (end - buf < 2) ? TRUE : FALSE);
}
} else
ctl_be_block_unmap_dev_range(be_lun, beio,
beio->io_offset, beio->io_len, TRUE);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_be_block_dispatch_dev(struct ctl_be_block_lun *be_lun,
struct ctl_be_block_io *beio)
{
TAILQ_HEAD(, bio) queue = TAILQ_HEAD_INITIALIZER(queue);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct bio *bio;
struct cdevsw *csw;
struct cdev *dev;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
off_t cur_offset;
int i, max_iosize, ref;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DPRINTF("entered\n");
csw = devvn_refthread(be_lun->vn, &dev, &ref);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* We have to limit our I/O size to the maximum supported by the
* backend device.
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
*/
if (csw) {
max_iosize = dev->si_iosize_max;
if (max_iosize < PAGE_SIZE)
max_iosize = DFLTPHYS;
} else
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
max_iosize = DFLTPHYS;
cur_offset = beio->io_offset;
for (i = 0; i < beio->num_segs; i++) {
size_t cur_size;
uint8_t *cur_ptr;
cur_size = beio->sg_segs[i].len;
cur_ptr = beio->sg_segs[i].addr;
while (cur_size > 0) {
/* This can't fail, it's a blocking allocation. */
bio = g_alloc_bio();
KASSERT(bio != NULL, ("g_alloc_bio() failed!\n"));
bio->bio_cmd = beio->bio_cmd;
bio->bio_dev = dev;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
bio->bio_caller1 = beio;
bio->bio_length = min(cur_size, max_iosize);
bio->bio_offset = cur_offset;
bio->bio_data = cur_ptr;
bio->bio_done = ctl_be_block_biodone;
bio->bio_pblkno = cur_offset / be_lun->cbe_lun.blocksize;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
cur_offset += bio->bio_length;
cur_ptr += bio->bio_length;
cur_size -= bio->bio_length;
TAILQ_INSERT_TAIL(&queue, bio, bio_queue);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
beio->num_bios_sent++;
}
}
beio->send_complete = 1;
binuptime(&beio->ds_t0);
devstat_start_transaction(be_lun->disk_stats, &beio->ds_t0);
/*
* Fire off all allocated requests!
*/
while ((bio = TAILQ_FIRST(&queue)) != NULL) {
TAILQ_REMOVE(&queue, bio, bio_queue);
if (csw)
csw->d_strategy(bio);
else {
bio->bio_error = ENXIO;
ctl_be_block_biodone(bio);
}
}
if (csw)
dev_relthread(dev, ref);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
static uint64_t
ctl_be_block_getattr_dev(struct ctl_be_block_lun *be_lun, const char *attrname)
{
struct diocgattr_arg arg;
struct cdevsw *csw;
struct cdev *dev;
int error, ref;
csw = devvn_refthread(be_lun->vn, &dev, &ref);
if (csw == NULL)
return (UINT64_MAX);
strlcpy(arg.name, attrname, sizeof(arg.name));
arg.len = sizeof(arg.value.off);
if (csw->d_ioctl) {
error = csw->d_ioctl(dev, DIOCGATTR, (caddr_t)&arg, FREAD,
curthread);
} else
error = ENODEV;
dev_relthread(dev, ref);
if (error != 0)
return (UINT64_MAX);
return (arg.value.off);
}
static void
ctl_be_block_cw_dispatch_sync(struct ctl_be_block_lun *be_lun,
union ctl_io *io)
{
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
struct ctl_be_block_io *beio;
struct ctl_lba_len_flags *lbalen;
DPRINTF("entered\n");
beio = (struct ctl_be_block_io *)PRIV(io)->ptr;
lbalen = (struct ctl_lba_len_flags *)&io->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
beio->io_len = lbalen->len * cbe_lun->blocksize;
beio->io_offset = lbalen->lba * cbe_lun->blocksize;
beio->io_arg = (lbalen->flags & SSC_IMMED) != 0;
beio->bio_cmd = BIO_FLUSH;
beio->ds_trans_type = DEVSTAT_NO_DATA;
DPRINTF("SYNC\n");
be_lun->lun_flush(be_lun, beio);
}
static void
ctl_be_block_cw_done_ws(struct ctl_be_block_io *beio)
{
union ctl_io *io;
io = beio->io;
ctl_free_beio(beio);
if ((io->io_hdr.flags & CTL_FLAG_ABORT) ||
((io->io_hdr.status & CTL_STATUS_MASK) != CTL_STATUS_NONE &&
(io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS)) {
ctl_config_write_done(io);
return;
}
ctl_be_block_config_write(io);
}
static void
ctl_be_block_cw_dispatch_ws(struct ctl_be_block_lun *be_lun,
union ctl_io *io)
{
struct ctl_be_block_softc *softc = be_lun->softc;
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
struct ctl_be_block_io *beio;
struct ctl_lba_len_flags *lbalen;
uint64_t len_left, lba;
uint32_t pb, pbo, adj;
int i, seglen;
uint8_t *buf, *end;
DPRINTF("entered\n");
beio = (struct ctl_be_block_io *)PRIV(io)->ptr;
lbalen = ARGS(io);
if (lbalen->flags & ~(SWS_LBDATA | SWS_UNMAP | SWS_ANCHOR | SWS_NDOB) ||
(lbalen->flags & (SWS_UNMAP | SWS_ANCHOR) && be_lun->unmap == NULL)) {
ctl_free_beio(beio);
ctl_set_invalid_field(&io->scsiio,
/*sks_valid*/ 1,
/*command*/ 1,
/*field*/ 1,
/*bit_valid*/ 0,
/*bit*/ 0);
ctl_config_write_done(io);
return;
}
if (lbalen->flags & (SWS_UNMAP | SWS_ANCHOR)) {
beio->io_offset = lbalen->lba * cbe_lun->blocksize;
beio->io_len = (uint64_t)lbalen->len * cbe_lun->blocksize;
beio->bio_cmd = BIO_DELETE;
beio->ds_trans_type = DEVSTAT_FREE;
be_lun->unmap(be_lun, beio);
return;
}
beio->bio_cmd = BIO_WRITE;
beio->ds_trans_type = DEVSTAT_WRITE;
DPRINTF("WRITE SAME at LBA %jx len %u\n",
(uintmax_t)lbalen->lba, lbalen->len);
pb = cbe_lun->blocksize << be_lun->cbe_lun.pblockexp;
if (be_lun->cbe_lun.pblockoff > 0)
pbo = pb - cbe_lun->blocksize * be_lun->cbe_lun.pblockoff;
else
pbo = 0;
len_left = (uint64_t)lbalen->len * cbe_lun->blocksize;
for (i = 0, lba = 0; i < CTLBLK_NUM_SEGS && len_left > 0; i++) {
/*
* Setup the S/G entry for this chunk.
*/
seglen = MIN(CTLBLK_MAX_SEG, len_left);
if (pb > cbe_lun->blocksize) {
adj = ((lbalen->lba + lba) * cbe_lun->blocksize +
seglen - pbo) % pb;
if (seglen > adj)
seglen -= adj;
else
seglen -= seglen % cbe_lun->blocksize;
} else
seglen -= seglen % cbe_lun->blocksize;
ctl_alloc_seg(softc, &beio->sg_segs[i], seglen);
DPRINTF("segment %d addr %p len %zd\n", i,
beio->sg_segs[i].addr, beio->sg_segs[i].len);
beio->num_segs++;
len_left -= seglen;
buf = beio->sg_segs[i].addr;
end = buf + seglen;
for (; buf < end; buf += cbe_lun->blocksize) {
if (lbalen->flags & SWS_NDOB) {
memset(buf, 0, cbe_lun->blocksize);
} else {
memcpy(buf, io->scsiio.kern_data_ptr,
cbe_lun->blocksize);
}
if (lbalen->flags & SWS_LBDATA)
scsi_ulto4b(lbalen->lba + lba, buf);
lba++;
}
}
beio->io_offset = lbalen->lba * cbe_lun->blocksize;
beio->io_len = lba * cbe_lun->blocksize;
/* We can not do all in one run. Correct and schedule rerun. */
if (len_left > 0) {
lbalen->lba += lba;
lbalen->len -= lba;
beio->beio_cont = ctl_be_block_cw_done_ws;
}
be_lun->dispatch(be_lun, beio);
}
static void
ctl_be_block_cw_dispatch_unmap(struct ctl_be_block_lun *be_lun,
union ctl_io *io)
{
struct ctl_be_block_io *beio;
struct ctl_ptr_len_flags *ptrlen;
DPRINTF("entered\n");
beio = (struct ctl_be_block_io *)PRIV(io)->ptr;
ptrlen = (struct ctl_ptr_len_flags *)&io->io_hdr.ctl_private[CTL_PRIV_LBA_LEN];
if ((ptrlen->flags & ~SU_ANCHOR) != 0 || be_lun->unmap == NULL) {
ctl_free_beio(beio);
ctl_set_invalid_field(&io->scsiio,
/*sks_valid*/ 0,
/*command*/ 1,
/*field*/ 0,
/*bit_valid*/ 0,
/*bit*/ 0);
ctl_config_write_done(io);
return;
}
beio->io_len = 0;
beio->io_offset = -1;
beio->bio_cmd = BIO_DELETE;
beio->ds_trans_type = DEVSTAT_FREE;
DPRINTF("UNMAP\n");
be_lun->unmap(be_lun, beio);
}
static void
ctl_be_block_cr_done(struct ctl_be_block_io *beio)
{
union ctl_io *io;
io = beio->io;
ctl_free_beio(beio);
ctl_config_read_done(io);
}
static void
ctl_be_block_cr_dispatch(struct ctl_be_block_lun *be_lun,
union ctl_io *io)
{
struct ctl_be_block_io *beio;
struct ctl_be_block_softc *softc;
DPRINTF("entered\n");
softc = be_lun->softc;
beio = ctl_alloc_beio(softc);
beio->io = io;
beio->lun = be_lun;
beio->beio_cont = ctl_be_block_cr_done;
PRIV(io)->ptr = (void *)beio;
switch (io->scsiio.cdb[0]) {
case SERVICE_ACTION_IN: /* GET LBA STATUS */
beio->bio_cmd = -1;
beio->ds_trans_type = DEVSTAT_NO_DATA;
beio->ds_tag_type = DEVSTAT_TAG_ORDERED;
beio->io_len = 0;
if (be_lun->get_lba_status)
be_lun->get_lba_status(be_lun, beio);
else
ctl_be_block_cr_done(beio);
break;
default:
panic("Unhandled CDB type %#x", io->scsiio.cdb[0]);
break;
}
}
static void
ctl_be_block_cw_done(struct ctl_be_block_io *beio)
{
union ctl_io *io;
io = beio->io;
ctl_free_beio(beio);
ctl_config_write_done(io);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_be_block_cw_dispatch(struct ctl_be_block_lun *be_lun,
union ctl_io *io)
{
struct ctl_be_block_io *beio;
struct ctl_be_block_softc *softc;
DPRINTF("entered\n");
softc = be_lun->softc;
beio = ctl_alloc_beio(softc);
beio->io = io;
beio->lun = be_lun;
beio->beio_cont = ctl_be_block_cw_done;
switch (io->scsiio.tag_type) {
case CTL_TAG_ORDERED:
beio->ds_tag_type = DEVSTAT_TAG_ORDERED;
break;
case CTL_TAG_HEAD_OF_QUEUE:
beio->ds_tag_type = DEVSTAT_TAG_HEAD;
break;
case CTL_TAG_UNTAGGED:
case CTL_TAG_SIMPLE:
case CTL_TAG_ACA:
default:
beio->ds_tag_type = DEVSTAT_TAG_SIMPLE;
break;
}
PRIV(io)->ptr = (void *)beio;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
switch (io->scsiio.cdb[0]) {
case SYNCHRONIZE_CACHE:
case SYNCHRONIZE_CACHE_16:
ctl_be_block_cw_dispatch_sync(be_lun, io);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
break;
case WRITE_SAME_10:
case WRITE_SAME_16:
ctl_be_block_cw_dispatch_ws(be_lun, io);
break;
case UNMAP:
ctl_be_block_cw_dispatch_unmap(be_lun, io);
break;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
default:
panic("Unhandled CDB type %#x", io->scsiio.cdb[0]);
break;
}
}
SDT_PROBE_DEFINE1(cbb, , read, start, "uint64_t");
SDT_PROBE_DEFINE1(cbb, , write, start, "uint64_t");
SDT_PROBE_DEFINE1(cbb, , read, alloc_done, "uint64_t");
SDT_PROBE_DEFINE1(cbb, , write, alloc_done, "uint64_t");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_be_block_next(struct ctl_be_block_io *beio)
{
struct ctl_be_block_lun *be_lun;
union ctl_io *io;
io = beio->io;
be_lun = beio->lun;
ctl_free_beio(beio);
if ((io->io_hdr.flags & CTL_FLAG_ABORT) ||
((io->io_hdr.status & CTL_STATUS_MASK) != CTL_STATUS_NONE &&
(io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS)) {
ctl_data_submit_done(io);
return;
}
io->io_hdr.status &= ~CTL_STATUS_MASK;
io->io_hdr.status |= CTL_STATUS_NONE;
mtx_lock(&be_lun->queue_lock);
STAILQ_INSERT_TAIL(&be_lun->input_queue, &io->io_hdr, links);
mtx_unlock(&be_lun->queue_lock);
taskqueue_enqueue(be_lun->io_taskqueue, &be_lun->io_task);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_be_block_dispatch(struct ctl_be_block_lun *be_lun,
union ctl_io *io)
{
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct ctl_be_block_io *beio;
struct ctl_be_block_softc *softc;
struct ctl_lba_len_flags *lbalen;
struct ctl_ptr_len_flags *bptrlen;
uint64_t len_left, lbas;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int i;
softc = be_lun->softc;
DPRINTF("entered\n");
lbalen = ARGS(io);
if (lbalen->flags & CTL_LLF_WRITE) {
SDT_PROBE0(cbb, , write, start);
} else {
SDT_PROBE0(cbb, , read, start);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
beio = ctl_alloc_beio(softc);
beio->io = io;
beio->lun = be_lun;
bptrlen = PRIV(io);
bptrlen->ptr = (void *)beio;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
switch (io->scsiio.tag_type) {
case CTL_TAG_ORDERED:
beio->ds_tag_type = DEVSTAT_TAG_ORDERED;
break;
case CTL_TAG_HEAD_OF_QUEUE:
beio->ds_tag_type = DEVSTAT_TAG_HEAD;
break;
case CTL_TAG_UNTAGGED:
case CTL_TAG_SIMPLE:
case CTL_TAG_ACA:
default:
beio->ds_tag_type = DEVSTAT_TAG_SIMPLE;
break;
}
if (lbalen->flags & CTL_LLF_WRITE) {
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
beio->bio_cmd = BIO_WRITE;
beio->ds_trans_type = DEVSTAT_WRITE;
} else {
beio->bio_cmd = BIO_READ;
beio->ds_trans_type = DEVSTAT_READ;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
DPRINTF("%s at LBA %jx len %u @%ju\n",
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
(beio->bio_cmd == BIO_READ) ? "READ" : "WRITE",
(uintmax_t)lbalen->lba, lbalen->len, bptrlen->len);
if (lbalen->flags & CTL_LLF_COMPARE) {
beio->two_sglists = 1;
lbas = CTLBLK_HALF_IO_SIZE;
} else {
lbas = CTLBLK_MAX_IO_SIZE;
}
lbas = MIN(lbalen->len - bptrlen->len, lbas / cbe_lun->blocksize);
beio->io_offset = (lbalen->lba + bptrlen->len) * cbe_lun->blocksize;
beio->io_len = lbas * cbe_lun->blocksize;
bptrlen->len += lbas;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
for (i = 0, len_left = beio->io_len; len_left > 0; i++) {
KASSERT(i < CTLBLK_MAX_SEGS, ("Too many segs (%d >= %d)",
i, CTLBLK_MAX_SEGS));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* Setup the S/G entry for this chunk.
*/
ctl_alloc_seg(softc, &beio->sg_segs[i],
MIN(CTLBLK_MAX_SEG, len_left));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DPRINTF("segment %d addr %p len %zd\n", i,
beio->sg_segs[i].addr, beio->sg_segs[i].len);
/* Set up second segment for compare operation. */
if (beio->two_sglists) {
ctl_alloc_seg(softc,
&beio->sg_segs[i + CTLBLK_HALF_SEGS],
beio->sg_segs[i].len);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
beio->num_segs++;
len_left -= beio->sg_segs[i].len;
}
if (bptrlen->len < lbalen->len)
beio->beio_cont = ctl_be_block_next;
io->scsiio.be_move_done = ctl_be_block_move_done;
/* For compare we have separate S/G lists for read and datamove. */
if (beio->two_sglists)
io->scsiio.kern_data_ptr = (uint8_t *)&beio->sg_segs[CTLBLK_HALF_SEGS];
else
io->scsiio.kern_data_ptr = (uint8_t *)beio->sg_segs;
io->scsiio.kern_data_len = beio->io_len;
io->scsiio.kern_sg_entries = beio->num_segs;
Implement zero-copy iSCSI target transmission/read. Add ICL_NOCOPY flag to icl_pdu_append_data(), specifying that the method can just reference the data buffer instead of immediately copying it. Extend the offload KPI with optional PDU queue method, allowing to specify completion callback, called when all the data referenced by above has been transferred and won't be accessed any more (the buffers can be freed). Implement the above functionality in software iSCSI driver using mbufs with external storage and reference counter. Note that some NICs (ixl(4)) may keep the mbuf in TX queue for a long time, so CTL has to be ready. Add optional method to struct ctl_scsiio for buffer reference counting. Implement it for CTL block backend, allowing to delay free of the struct ctl_be_block_io and memory it references as needed. In first reincarnation of the patch I tried to delay whole I/O as it is done for FibreChannel, that was cleaner, but due to the above callback delays I had to rewrite it this way to not leave LUN referenced potentially for hours or more. All together on sequential read from ZFS ARC this saves about 30% of CPU time and memory bandwidth by avoiding one of 3 memory copies (the other two are from ZFS ARC to DMU cache and then from DMU cache to CTL buffers). On tests with 2x Xeon Silver 4114 this allows to reach full line rate of 100GigE NIC. Tests with Gold CPUs and two 100GigE NICs are stil TBD, but expectations to saturate them are pretty high. ;) Discussed with: Chelsio Sponsored by: iXsystems, Inc.
2020-06-08 20:53:57 +00:00
io->scsiio.kern_data_ref = ctl_refcnt_beio;
io->scsiio.kern_data_arg = beio;
io->io_hdr.flags |= CTL_FLAG_ALLOCATED;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* For the read case, we need to read the data into our buffers and
* then we can send it back to the user. For the write case, we
* need to get the data from the user first.
*/
if (beio->bio_cmd == BIO_READ) {
SDT_PROBE0(cbb, , read, alloc_done);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun->dispatch(be_lun, beio);
} else {
SDT_PROBE0(cbb, , write, alloc_done);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_datamove(io);
}
}
static void
ctl_be_block_worker(void *context, int pending)
{
struct ctl_be_block_lun *be_lun = (struct ctl_be_block_lun *)context;
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
union ctl_io *io;
struct ctl_be_block_io *beio;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DPRINTF("entered\n");
/*
* Fetch and process I/Os from all queues. If we detect LUN
* CTL_LUN_FLAG_NO_MEDIA status here -- it is result of a race,
* so make response maximally opaque to not confuse initiator.
*/
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
for (;;) {
mtx_lock(&be_lun->queue_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
io = (union ctl_io *)STAILQ_FIRST(&be_lun->datamove_queue);
if (io != NULL) {
DPRINTF("datamove queue\n");
STAILQ_REMOVE_HEAD(&be_lun->datamove_queue, links);
mtx_unlock(&be_lun->queue_lock);
beio = (struct ctl_be_block_io *)PRIV(io)->ptr;
if (cbe_lun->flags & CTL_LUN_FLAG_NO_MEDIA) {
ctl_set_busy(&io->scsiio);
ctl_complete_beio(beio);
continue;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun->dispatch(be_lun, beio);
continue;
}
io = (union ctl_io *)STAILQ_FIRST(&be_lun->config_write_queue);
if (io != NULL) {
DPRINTF("config write queue\n");
STAILQ_REMOVE_HEAD(&be_lun->config_write_queue, links);
mtx_unlock(&be_lun->queue_lock);
if (cbe_lun->flags & CTL_LUN_FLAG_NO_MEDIA) {
ctl_set_busy(&io->scsiio);
ctl_config_write_done(io);
continue;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_be_block_cw_dispatch(be_lun, io);
continue;
}
io = (union ctl_io *)STAILQ_FIRST(&be_lun->config_read_queue);
if (io != NULL) {
DPRINTF("config read queue\n");
STAILQ_REMOVE_HEAD(&be_lun->config_read_queue, links);
mtx_unlock(&be_lun->queue_lock);
if (cbe_lun->flags & CTL_LUN_FLAG_NO_MEDIA) {
ctl_set_busy(&io->scsiio);
ctl_config_read_done(io);
continue;
}
ctl_be_block_cr_dispatch(be_lun, io);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
continue;
}
io = (union ctl_io *)STAILQ_FIRST(&be_lun->input_queue);
if (io != NULL) {
DPRINTF("input queue\n");
STAILQ_REMOVE_HEAD(&be_lun->input_queue, links);
mtx_unlock(&be_lun->queue_lock);
if (cbe_lun->flags & CTL_LUN_FLAG_NO_MEDIA) {
ctl_set_busy(&io->scsiio);
ctl_data_submit_done(io);
continue;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_be_block_dispatch(be_lun, io);
continue;
}
/*
* If we get here, there is no work left in the queues, so
* just break out and let the task queue go to sleep.
*/
mtx_unlock(&be_lun->queue_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
break;
}
}
/*
* Entry point from CTL to the backend for I/O. We queue everything to a
* work thread, so this just puts the I/O on a queue and wakes up the
* thread.
*/
static int
ctl_be_block_submit(union ctl_io *io)
{
struct ctl_be_block_lun *be_lun;
DPRINTF("entered\n");
be_lun = (struct ctl_be_block_lun *)CTL_BACKEND_LUN(io);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
KASSERT(io->io_hdr.io_type == CTL_IO_SCSI,
("%s: unexpected I/O type %x", __func__, io->io_hdr.io_type));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
PRIV(io)->len = 0;
mtx_lock(&be_lun->queue_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
STAILQ_INSERT_TAIL(&be_lun->input_queue, &io->io_hdr, links);
mtx_unlock(&be_lun->queue_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
taskqueue_enqueue(be_lun->io_taskqueue, &be_lun->io_task);
return (CTL_RETVAL_COMPLETE);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
static int
ctl_be_block_ioctl(struct cdev *dev, u_long cmd, caddr_t addr,
int flag, struct thread *td)
{
struct ctl_be_block_softc *softc = &backend_block_softc;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int error;
error = 0;
switch (cmd) {
case CTL_LUN_REQ: {
struct ctl_lun_req *lun_req;
lun_req = (struct ctl_lun_req *)addr;
switch (lun_req->reqtype) {
case CTL_LUNREQ_CREATE:
error = ctl_be_block_create(softc, lun_req);
break;
case CTL_LUNREQ_RM:
error = ctl_be_block_rm(softc, lun_req);
break;
case CTL_LUNREQ_MODIFY:
error = ctl_be_block_modify(softc, lun_req);
break;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
default:
lun_req->status = CTL_LUN_ERROR;
snprintf(lun_req->error_str, sizeof(lun_req->error_str),
"invalid LUN request type %d",
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
lun_req->reqtype);
break;
}
break;
}
default:
error = ENOTTY;
break;
}
return (error);
}
static int
ctl_be_block_open_file(struct ctl_be_block_lun *be_lun, struct ctl_lun_req *req)
{
struct ctl_be_lun *cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct ctl_be_block_filedata *file_data;
struct ctl_lun_create_params *params;
const char *value;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct vattr vattr;
off_t ps, pss, po, pos, us, uss, uo, uos;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int error;
cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
file_data = &be_lun->backend.file;
params = &be_lun->params;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun->dev_type = CTL_BE_BLOCK_FILE;
be_lun->dispatch = ctl_be_block_dispatch_file;
be_lun->lun_flush = ctl_be_block_flush_file;
be_lun->get_lba_status = ctl_be_block_gls_file;
be_lun->getattr = ctl_be_block_getattr_file;
be_lun->unmap = NULL;
cbe_lun->flags &= ~CTL_LUN_FLAG_UNMAP;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
error = VOP_GETATTR(be_lun->vn, &vattr, curthread->td_ucred);
if (error != 0) {
snprintf(req->error_str, sizeof(req->error_str),
"error calling VOP_GETATTR() for file %s",
be_lun->dev_path);
return (error);
}
file_data->cred = crhold(curthread->td_ucred);
if (params->lun_size_bytes != 0)
be_lun->size_bytes = params->lun_size_bytes;
else
be_lun->size_bytes = vattr.va_size;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* For files we can use any logical block size. Prefer 512 bytes
* for compatibility reasons. If file's vattr.va_blocksize
* (preferred I/O block size) is bigger and multiple to chosen
* logical block size -- report it as physical block size.
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
*/
if (params->blocksize_bytes != 0)
cbe_lun->blocksize = params->blocksize_bytes;
else if (cbe_lun->lun_type == T_CDROM)
cbe_lun->blocksize = 2048;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
else
cbe_lun->blocksize = 512;
be_lun->size_blocks = be_lun->size_bytes / cbe_lun->blocksize;
cbe_lun->maxlba = (be_lun->size_blocks == 0) ?
0 : (be_lun->size_blocks - 1);
us = ps = vattr.va_blocksize;
uo = po = 0;
value = dnvlist_get_string(cbe_lun->options, "pblocksize", NULL);
if (value != NULL)
ctl_expand_number(value, &ps);
value = dnvlist_get_string(cbe_lun->options, "pblockoffset", NULL);
if (value != NULL)
ctl_expand_number(value, &po);
pss = ps / cbe_lun->blocksize;
pos = po / cbe_lun->blocksize;
if ((pss > 0) && (pss * cbe_lun->blocksize == ps) && (pss >= pos) &&
((pss & (pss - 1)) == 0) && (pos * cbe_lun->blocksize == po)) {
cbe_lun->pblockexp = fls(pss) - 1;
cbe_lun->pblockoff = (pss - pos) % pss;
}
value = dnvlist_get_string(cbe_lun->options, "ublocksize", NULL);
if (value != NULL)
ctl_expand_number(value, &us);
value = dnvlist_get_string(cbe_lun->options, "ublockoffset", NULL);
if (value != NULL)
ctl_expand_number(value, &uo);
uss = us / cbe_lun->blocksize;
uos = uo / cbe_lun->blocksize;
if ((uss > 0) && (uss * cbe_lun->blocksize == us) && (uss >= uos) &&
((uss & (uss - 1)) == 0) && (uos * cbe_lun->blocksize == uo)) {
cbe_lun->ublockexp = fls(uss) - 1;
cbe_lun->ublockoff = (uss - uos) % uss;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* Sanity check. The media size has to be at least one
* sector long.
*/
if (be_lun->size_bytes < cbe_lun->blocksize) {
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
error = EINVAL;
snprintf(req->error_str, sizeof(req->error_str),
"file %s size %ju < block size %u", be_lun->dev_path,
(uintmax_t)be_lun->size_bytes, cbe_lun->blocksize);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
cbe_lun->opttxferlen = CTLBLK_MAX_IO_SIZE / cbe_lun->blocksize;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (error);
}
static int
ctl_be_block_open_dev(struct ctl_be_block_lun *be_lun, struct ctl_lun_req *req)
{
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct ctl_lun_create_params *params;
struct cdevsw *csw;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct cdev *dev;
const char *value;
int error, atomic, maxio, ref, unmap, tmp;
2015-08-27 21:16:24 +00:00
off_t ps, pss, po, pos, us, uss, uo, uos, otmp;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
params = &be_lun->params;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun->dev_type = CTL_BE_BLOCK_DEV;
csw = devvn_refthread(be_lun->vn, &dev, &ref);
if (csw == NULL)
return (ENXIO);
if (strcmp(csw->d_name, "zvol") == 0) {
be_lun->dispatch = ctl_be_block_dispatch_zvol;
be_lun->get_lba_status = ctl_be_block_gls_zvol;
atomic = maxio = CTLBLK_MAX_IO_SIZE;
} else {
be_lun->dispatch = ctl_be_block_dispatch_dev;
be_lun->get_lba_status = NULL;
atomic = 0;
maxio = dev->si_iosize_max;
if (maxio <= 0)
maxio = DFLTPHYS;
if (maxio > CTLBLK_MAX_SEG)
maxio = CTLBLK_MAX_SEG;
}
be_lun->lun_flush = ctl_be_block_flush_dev;
be_lun->getattr = ctl_be_block_getattr_dev;
be_lun->unmap = ctl_be_block_unmap_dev;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (!csw->d_ioctl) {
dev_relthread(dev, ref);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
snprintf(req->error_str, sizeof(req->error_str),
"no d_ioctl for device %s!", be_lun->dev_path);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (ENODEV);
}
error = csw->d_ioctl(dev, DIOCGSECTORSIZE, (caddr_t)&tmp, FREAD,
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
curthread);
if (error) {
dev_relthread(dev, ref);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
snprintf(req->error_str, sizeof(req->error_str),
"error %d returned for DIOCGSECTORSIZE ioctl "
"on %s!", error, be_lun->dev_path);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (error);
}
/*
* If the user has asked for a blocksize that is greater than the
* backing device's blocksize, we can do it only if the blocksize
* the user is asking for is an even multiple of the underlying
* device's blocksize.
*/
2015-08-15 18:22:16 +00:00
if ((params->blocksize_bytes != 0) &&
(params->blocksize_bytes >= tmp)) {
if (params->blocksize_bytes % tmp == 0) {
cbe_lun->blocksize = params->blocksize_bytes;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else {
dev_relthread(dev, ref);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
snprintf(req->error_str, sizeof(req->error_str),
"requested blocksize %u is not an even "
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
"multiple of backing device blocksize %u",
2015-08-27 21:16:24 +00:00
params->blocksize_bytes, tmp);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (EINVAL);
}
2015-08-15 18:22:16 +00:00
} else if (params->blocksize_bytes != 0) {
dev_relthread(dev, ref);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
snprintf(req->error_str, sizeof(req->error_str),
"requested blocksize %u < backing device "
2015-08-27 21:16:24 +00:00
"blocksize %u", params->blocksize_bytes, tmp);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (EINVAL);
} else if (cbe_lun->lun_type == T_CDROM)
cbe_lun->blocksize = MAX(tmp, 2048);
else
cbe_lun->blocksize = tmp;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
error = csw->d_ioctl(dev, DIOCGMEDIASIZE, (caddr_t)&otmp, FREAD,
curthread);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (error) {
dev_relthread(dev, ref);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
snprintf(req->error_str, sizeof(req->error_str),
"error %d returned for DIOCGMEDIASIZE "
" ioctl on %s!", error,
be_lun->dev_path);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (error);
}
if (params->lun_size_bytes != 0) {
2015-08-27 21:16:24 +00:00
if (params->lun_size_bytes > otmp) {
dev_relthread(dev, ref);
snprintf(req->error_str, sizeof(req->error_str),
"requested LUN size %ju > backing device "
"size %ju",
(uintmax_t)params->lun_size_bytes,
2015-08-27 21:16:24 +00:00
(uintmax_t)otmp);
return (EINVAL);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun->size_bytes = params->lun_size_bytes;
2015-08-15 18:22:16 +00:00
} else
2015-08-27 21:16:24 +00:00
be_lun->size_bytes = otmp;
be_lun->size_blocks = be_lun->size_bytes / cbe_lun->blocksize;
cbe_lun->maxlba = (be_lun->size_blocks == 0) ?
0 : (be_lun->size_blocks - 1);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
error = csw->d_ioctl(dev, DIOCGSTRIPESIZE, (caddr_t)&ps, FREAD,
curthread);
if (error)
ps = po = 0;
else {
error = csw->d_ioctl(dev, DIOCGSTRIPEOFFSET, (caddr_t)&po,
FREAD, curthread);
if (error)
po = 0;
}
us = ps;
uo = po;
value = dnvlist_get_string(cbe_lun->options, "pblocksize", NULL);
if (value != NULL)
ctl_expand_number(value, &ps);
value = dnvlist_get_string(cbe_lun->options, "pblockoffset", NULL);
if (value != NULL)
ctl_expand_number(value, &po);
pss = ps / cbe_lun->blocksize;
pos = po / cbe_lun->blocksize;
if ((pss > 0) && (pss * cbe_lun->blocksize == ps) && (pss >= pos) &&
((pss & (pss - 1)) == 0) && (pos * cbe_lun->blocksize == po)) {
cbe_lun->pblockexp = fls(pss) - 1;
cbe_lun->pblockoff = (pss - pos) % pss;
}
value = dnvlist_get_string(cbe_lun->options, "ublocksize", NULL);
if (value != NULL)
ctl_expand_number(value, &us);
value = dnvlist_get_string(cbe_lun->options, "ublockoffset", NULL);
if (value != NULL)
ctl_expand_number(value, &uo);
uss = us / cbe_lun->blocksize;
uos = uo / cbe_lun->blocksize;
if ((uss > 0) && (uss * cbe_lun->blocksize == us) && (uss >= uos) &&
((uss & (uss - 1)) == 0) && (uos * cbe_lun->blocksize == uo)) {
cbe_lun->ublockexp = fls(uss) - 1;
cbe_lun->ublockoff = (uss - uos) % uss;
}
cbe_lun->atomicblock = atomic / cbe_lun->blocksize;
cbe_lun->opttxferlen = maxio / cbe_lun->blocksize;
if (be_lun->dispatch == ctl_be_block_dispatch_zvol) {
unmap = 1;
} else {
struct diocgattr_arg arg;
strlcpy(arg.name, "GEOM::candelete", sizeof(arg.name));
arg.len = sizeof(arg.value.i);
error = csw->d_ioctl(dev, DIOCGATTR, (caddr_t)&arg, FREAD,
curthread);
unmap = (error == 0) ? arg.value.i : 0;
}
value = dnvlist_get_string(cbe_lun->options, "unmap", NULL);
if (value != NULL)
unmap = (strcmp(value, "on") == 0);
if (unmap)
cbe_lun->flags |= CTL_LUN_FLAG_UNMAP;
else
cbe_lun->flags &= ~CTL_LUN_FLAG_UNMAP;
dev_relthread(dev, ref);
return (0);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static int
ctl_be_block_close(struct ctl_be_block_lun *be_lun)
{
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
int flags;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (be_lun->vn) {
flags = FREAD;
if ((cbe_lun->flags & CTL_LUN_FLAG_READONLY) == 0)
flags |= FWRITE;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
(void)vn_close(be_lun->vn, flags, NOCRED, curthread);
be_lun->vn = NULL;
switch (be_lun->dev_type) {
case CTL_BE_BLOCK_DEV:
break;
case CTL_BE_BLOCK_FILE:
if (be_lun->backend.file.cred != NULL) {
crfree(be_lun->backend.file.cred);
be_lun->backend.file.cred = NULL;
}
break;
case CTL_BE_BLOCK_NONE:
break;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
default:
panic("Unexpected backend type %d", be_lun->dev_type);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
break;
}
be_lun->dev_type = CTL_BE_BLOCK_NONE;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
return (0);
}
static int
ctl_be_block_open(struct ctl_be_block_lun *be_lun, struct ctl_lun_req *req)
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
{
struct ctl_be_lun *cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct nameidata nd;
const char *value;
int error, flags;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
error = 0;
if (rootvnode == NULL) {
snprintf(req->error_str, sizeof(req->error_str),
"Root filesystem is not mounted");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (1);
}
pwd_ensure_dirs();
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
value = dnvlist_get_string(cbe_lun->options, "file", NULL);
if (value == NULL) {
snprintf(req->error_str, sizeof(req->error_str),
"no file argument specified");
return (1);
}
free(be_lun->dev_path, M_CTLBLK);
be_lun->dev_path = strdup(value, M_CTLBLK);
flags = FREAD;
value = dnvlist_get_string(cbe_lun->options, "readonly", NULL);
if (value != NULL) {
if (strcmp(value, "on") != 0)
flags |= FWRITE;
} else if (cbe_lun->lun_type == T_DIRECT)
flags |= FWRITE;
again:
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
NDINIT(&nd, LOOKUP, FOLLOW, UIO_SYSSPACE, be_lun->dev_path, curthread);
error = vn_open(&nd, &flags, 0, NULL);
if ((error == EROFS || error == EACCES) && (flags & FWRITE)) {
flags &= ~FWRITE;
goto again;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (error) {
/*
* This is the only reasonable guess we can make as far as
* path if the user doesn't give us a fully qualified path.
* If they want to specify a file, they need to specify the
* full path.
*/
if (be_lun->dev_path[0] != '/') {
char *dev_name;
asprintf(&dev_name, M_CTLBLK, "/dev/%s",
be_lun->dev_path);
free(be_lun->dev_path, M_CTLBLK);
be_lun->dev_path = dev_name;
goto again;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
snprintf(req->error_str, sizeof(req->error_str),
"error opening %s: %d", be_lun->dev_path, error);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (error);
}
if (flags & FWRITE)
cbe_lun->flags &= ~CTL_LUN_FLAG_READONLY;
else
cbe_lun->flags |= CTL_LUN_FLAG_READONLY;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
NDFREE(&nd, NDF_ONLY_PNBUF);
be_lun->vn = nd.ni_vp;
/* We only support disks and files. */
if (vn_isdisk_error(be_lun->vn, &error)) {
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
error = ctl_be_block_open_dev(be_lun, req);
} else if (be_lun->vn->v_type == VREG) {
error = ctl_be_block_open_file(be_lun, req);
} else {
error = EINVAL;
snprintf(req->error_str, sizeof(req->error_str),
"%s is not a disk or plain file", be_lun->dev_path);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
VOP_UNLOCK(be_lun->vn);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
2015-08-15 18:22:16 +00:00
if (error != 0)
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_be_block_close(be_lun);
cbe_lun->serseq = CTL_LUN_SERSEQ_OFF;
if (be_lun->dispatch != ctl_be_block_dispatch_dev)
cbe_lun->serseq = CTL_LUN_SERSEQ_SOFT;
value = dnvlist_get_string(cbe_lun->options, "serseq", NULL);
if (value != NULL && strcmp(value, "on") == 0)
cbe_lun->serseq = CTL_LUN_SERSEQ_ON;
else if (value != NULL && strcmp(value, "read") == 0)
cbe_lun->serseq = CTL_LUN_SERSEQ_READ;
else if (value != NULL && strcmp(value, "soft") == 0)
cbe_lun->serseq = CTL_LUN_SERSEQ_SOFT;
else if (value != NULL && strcmp(value, "off") == 0)
cbe_lun->serseq = CTL_LUN_SERSEQ_OFF;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (0);
}
static int
ctl_be_block_create(struct ctl_be_block_softc *softc, struct ctl_lun_req *req)
{
struct ctl_be_lun *cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
struct ctl_be_block_lun *be_lun;
struct ctl_lun_create_params *params;
char num_thread_str[16];
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
char tmpstr[32];
const char *value;
int retval, num_threads;
int tmp_num_threads;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
params = &req->reqdata.create;
retval = 0;
req->status = CTL_LUN_OK;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun = malloc(sizeof(*be_lun), M_CTLBLK, M_ZERO | M_WAITOK);
cbe_lun = &be_lun->cbe_lun;
be_lun->params = req->reqdata.create;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun->softc = softc;
STAILQ_INIT(&be_lun->input_queue);
STAILQ_INIT(&be_lun->config_read_queue);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
STAILQ_INIT(&be_lun->config_write_queue);
STAILQ_INIT(&be_lun->datamove_queue);
mtx_init(&be_lun->io_lock, "ctlblock io", NULL, MTX_DEF);
mtx_init(&be_lun->queue_lock, "ctlblock queue", NULL, MTX_DEF);
cbe_lun->options = nvlist_clone(req->args_nvl);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (params->flags & CTL_LUN_FLAG_DEV_TYPE)
cbe_lun->lun_type = params->device_type;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
else
cbe_lun->lun_type = T_DIRECT;
be_lun->flags = 0;
cbe_lun->flags = 0;
value = dnvlist_get_string(cbe_lun->options, "ha_role", NULL);
if (value != NULL) {
if (strcmp(value, "primary") == 0)
cbe_lun->flags |= CTL_LUN_FLAG_PRIMARY;
} else if (control_softc->flags & CTL_FLAG_ACTIVE_SHELF)
cbe_lun->flags |= CTL_LUN_FLAG_PRIMARY;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (cbe_lun->lun_type == T_DIRECT ||
cbe_lun->lun_type == T_CDROM) {
2015-08-15 18:22:16 +00:00
be_lun->size_bytes = params->lun_size_bytes;
if (params->blocksize_bytes != 0)
cbe_lun->blocksize = params->blocksize_bytes;
else if (cbe_lun->lun_type == T_CDROM)
cbe_lun->blocksize = 2048;
2015-08-15 18:22:16 +00:00
else
cbe_lun->blocksize = 512;
be_lun->size_blocks = be_lun->size_bytes / cbe_lun->blocksize;
cbe_lun->maxlba = (be_lun->size_blocks == 0) ?
0 : (be_lun->size_blocks - 1);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if ((cbe_lun->flags & CTL_LUN_FLAG_PRIMARY) ||
control_softc->ha_mode == CTL_HA_MODE_SER_ONLY) {
retval = ctl_be_block_open(be_lun, req);
if (retval != 0) {
retval = 0;
req->status = CTL_LUN_WARNING;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
num_threads = cbb_num_threads;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else {
num_threads = 1;
}
value = dnvlist_get_string(cbe_lun->options, "num_threads", NULL);
if (value != NULL) {
tmp_num_threads = strtol(value, NULL, 0);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* We don't let the user specify less than one
* thread, but hope he's clueful enough not to
* specify 1000 threads.
*/
if (tmp_num_threads < 1) {
snprintf(req->error_str, sizeof(req->error_str),
"invalid number of threads %s",
num_thread_str);
goto bailout_error;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
num_threads = tmp_num_threads;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
if (be_lun->vn == NULL)
cbe_lun->flags |= CTL_LUN_FLAG_NO_MEDIA;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/* Tell the user the blocksize we ended up using */
params->lun_size_bytes = be_lun->size_bytes;
params->blocksize_bytes = cbe_lun->blocksize;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (params->flags & CTL_LUN_FLAG_ID_REQ) {
cbe_lun->req_lun_id = params->req_lun_id;
cbe_lun->flags |= CTL_LUN_FLAG_ID_REQ;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else
cbe_lun->req_lun_id = 0;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
cbe_lun->lun_shutdown = ctl_be_block_lun_shutdown;
cbe_lun->be = &ctl_be_block_driver;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if ((params->flags & CTL_LUN_FLAG_SERIAL_NUM) == 0) {
snprintf(tmpstr, sizeof(tmpstr), "MYSERIAL%04d",
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
softc->num_luns);
strncpy((char *)cbe_lun->serial_num, tmpstr,
MIN(sizeof(cbe_lun->serial_num), sizeof(tmpstr)));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/* Tell the user what we used for a serial number */
strncpy((char *)params->serial_num, tmpstr,
MIN(sizeof(params->serial_num), sizeof(tmpstr)));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else {
strncpy((char *)cbe_lun->serial_num, params->serial_num,
MIN(sizeof(cbe_lun->serial_num),
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
sizeof(params->serial_num)));
}
if ((params->flags & CTL_LUN_FLAG_DEVID) == 0) {
snprintf(tmpstr, sizeof(tmpstr), "MYDEVID%04d", softc->num_luns);
strncpy((char *)cbe_lun->device_id, tmpstr,
MIN(sizeof(cbe_lun->device_id), sizeof(tmpstr)));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/* Tell the user what we used for a device ID */
strncpy((char *)params->device_id, tmpstr,
MIN(sizeof(params->device_id), sizeof(tmpstr)));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else {
strncpy((char *)cbe_lun->device_id, params->device_id,
MIN(sizeof(cbe_lun->device_id),
sizeof(params->device_id)));
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
TASK_INIT(&be_lun->io_task, /*priority*/0, ctl_be_block_worker, be_lun);
be_lun->io_taskqueue = taskqueue_create("ctlblocktq", M_WAITOK,
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
taskqueue_thread_enqueue, /*context*/&be_lun->io_taskqueue);
if (be_lun->io_taskqueue == NULL) {
snprintf(req->error_str, sizeof(req->error_str),
"unable to create taskqueue");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
goto bailout_error;
}
/*
* Note that we start the same number of threads by default for
* both the file case and the block device case. For the file
* case, we need multiple threads to allow concurrency, because the
* vnode interface is designed to be a blocking interface. For the
* block device case, ZFS zvols at least will block the caller's
* context in many instances, and so we need multiple threads to
* overcome that problem. Other block devices don't need as many
* threads, but they shouldn't cause too many problems.
*
* If the user wants to just have a single thread for a block
* device, he can specify that when the LUN is created, or change
* the tunable/sysctl to alter the default number of threads.
*/
retval = taskqueue_start_threads_in_proc(&be_lun->io_taskqueue,
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*num threads*/num_threads,
/*priority*/PUSER,
/*proc*/control_softc->ctl_proc,
/*thread name*/"block");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (retval != 0)
goto bailout_error;
be_lun->num_threads = num_threads;
retval = ctl_add_lun(&be_lun->cbe_lun);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (retval != 0) {
snprintf(req->error_str, sizeof(req->error_str),
"ctl_add_lun() returned error %d, see dmesg for "
"details", retval);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
retval = 0;
goto bailout_error;
}
be_lun->disk_stats = devstat_new_entry("cbb", cbe_lun->lun_id,
cbe_lun->blocksize,
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
DEVSTAT_ALL_SUPPORTED,
cbe_lun->lun_type
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
| DEVSTAT_TYPE_IF_OTHER,
DEVSTAT_PRIORITY_OTHER);
mtx_lock(&softc->lock);
softc->num_luns++;
SLIST_INSERT_HEAD(&softc->lun_list, be_lun, links);
mtx_unlock(&softc->lock);
params->req_lun_id = cbe_lun->lun_id;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
return (retval);
bailout_error:
req->status = CTL_LUN_ERROR;
if (be_lun->io_taskqueue != NULL)
taskqueue_free(be_lun->io_taskqueue);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_be_block_close(be_lun);
if (be_lun->dev_path != NULL)
free(be_lun->dev_path, M_CTLBLK);
nvlist_destroy(cbe_lun->options);
mtx_destroy(&be_lun->queue_lock);
mtx_destroy(&be_lun->io_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
free(be_lun, M_CTLBLK);
return (retval);
}
static int
ctl_be_block_rm(struct ctl_be_block_softc *softc, struct ctl_lun_req *req)
{
struct ctl_lun_rm_params *params;
struct ctl_be_block_lun *be_lun;
struct ctl_be_lun *cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int retval;
params = &req->reqdata.rm;
sx_xlock(&softc->modify_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
mtx_lock(&softc->lock);
SLIST_FOREACH(be_lun, &softc->lun_list, links) {
if (be_lun->cbe_lun.lun_id == params->lun_id) {
SLIST_REMOVE(&softc->lun_list, be_lun,
ctl_be_block_lun, links);
softc->num_luns--;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
break;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
mtx_unlock(&softc->lock);
sx_xunlock(&softc->modify_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (be_lun == NULL) {
snprintf(req->error_str, sizeof(req->error_str),
"LUN %u is not managed by the block backend",
params->lun_id);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
goto bailout_error;
}
cbe_lun = &be_lun->cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (be_lun->vn != NULL) {
cbe_lun->flags |= CTL_LUN_FLAG_NO_MEDIA;
ctl_lun_no_media(cbe_lun);
taskqueue_drain_all(be_lun->io_taskqueue);
ctl_be_block_close(be_lun);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
mtx_lock(&softc->lock);
be_lun->flags |= CTL_BE_BLOCK_LUN_WAITING;
mtx_unlock(&softc->lock);
retval = ctl_remove_lun(cbe_lun);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (retval != 0) {
snprintf(req->error_str, sizeof(req->error_str),
"error %d returned from ctl_remove_lun() for "
"LUN %d", retval, params->lun_id);
mtx_lock(&softc->lock);
be_lun->flags &= ~CTL_BE_BLOCK_LUN_WAITING;
mtx_unlock(&softc->lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
goto bailout_error;
}
mtx_lock(&softc->lock);
while ((be_lun->flags & CTL_BE_BLOCK_LUN_UNCONFIGURED) == 0) {
retval = msleep(be_lun, &softc->lock, PCATCH, "ctlblockrm", 0);
if (retval == EINTR)
break;
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
be_lun->flags &= ~CTL_BE_BLOCK_LUN_WAITING;
if (be_lun->flags & CTL_BE_BLOCK_LUN_UNCONFIGURED) {
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
mtx_unlock(&softc->lock);
free(be_lun, M_CTLBLK);
} else {
mtx_unlock(&softc->lock);
return (EINTR);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
req->status = CTL_LUN_OK;
return (0);
bailout_error:
req->status = CTL_LUN_ERROR;
return (0);
}
static int
ctl_be_block_modify(struct ctl_be_block_softc *softc, struct ctl_lun_req *req)
{
struct ctl_lun_modify_params *params;
struct ctl_be_block_lun *be_lun;
struct ctl_be_lun *cbe_lun;
const char *value;
uint64_t oldsize;
int error, wasprim;
params = &req->reqdata.modify;
sx_xlock(&softc->modify_lock);
mtx_lock(&softc->lock);
SLIST_FOREACH(be_lun, &softc->lun_list, links) {
if (be_lun->cbe_lun.lun_id == params->lun_id)
break;
}
mtx_unlock(&softc->lock);
if (be_lun == NULL) {
snprintf(req->error_str, sizeof(req->error_str),
"LUN %u is not managed by the block backend",
params->lun_id);
goto bailout_error;
}
cbe_lun = &be_lun->cbe_lun;
if (params->lun_size_bytes != 0)
be_lun->params.lun_size_bytes = params->lun_size_bytes;
if (req->args_nvl != NULL) {
nvlist_destroy(cbe_lun->options);
cbe_lun->options = nvlist_clone(req->args_nvl);
}
wasprim = (cbe_lun->flags & CTL_LUN_FLAG_PRIMARY);
value = dnvlist_get_string(cbe_lun->options, "ha_role", NULL);
if (value != NULL) {
if (strcmp(value, "primary") == 0)
cbe_lun->flags |= CTL_LUN_FLAG_PRIMARY;
else
cbe_lun->flags &= ~CTL_LUN_FLAG_PRIMARY;
} else if (control_softc->flags & CTL_FLAG_ACTIVE_SHELF)
cbe_lun->flags |= CTL_LUN_FLAG_PRIMARY;
else
cbe_lun->flags &= ~CTL_LUN_FLAG_PRIMARY;
if (wasprim != (cbe_lun->flags & CTL_LUN_FLAG_PRIMARY)) {
if (cbe_lun->flags & CTL_LUN_FLAG_PRIMARY)
ctl_lun_primary(cbe_lun);
else
ctl_lun_secondary(cbe_lun);
}
oldsize = be_lun->size_blocks;
if ((cbe_lun->flags & CTL_LUN_FLAG_PRIMARY) ||
control_softc->ha_mode == CTL_HA_MODE_SER_ONLY) {
if (be_lun->vn == NULL)
error = ctl_be_block_open(be_lun, req);
else if (vn_isdisk_error(be_lun->vn, &error))
error = ctl_be_block_open_dev(be_lun, req);
else if (be_lun->vn->v_type == VREG) {
vn_lock(be_lun->vn, LK_SHARED | LK_RETRY);
error = ctl_be_block_open_file(be_lun, req);
VOP_UNLOCK(be_lun->vn);
} else
error = EINVAL;
if ((cbe_lun->flags & CTL_LUN_FLAG_NO_MEDIA) &&
be_lun->vn != NULL) {
cbe_lun->flags &= ~CTL_LUN_FLAG_NO_MEDIA;
ctl_lun_has_media(cbe_lun);
} else if ((cbe_lun->flags & CTL_LUN_FLAG_NO_MEDIA) == 0 &&
be_lun->vn == NULL) {
cbe_lun->flags |= CTL_LUN_FLAG_NO_MEDIA;
ctl_lun_no_media(cbe_lun);
}
cbe_lun->flags &= ~CTL_LUN_FLAG_EJECTED;
} else {
if (be_lun->vn != NULL) {
cbe_lun->flags |= CTL_LUN_FLAG_NO_MEDIA;
ctl_lun_no_media(cbe_lun);
taskqueue_drain_all(be_lun->io_taskqueue);
error = ctl_be_block_close(be_lun);
} else
error = 0;
}
if (be_lun->size_blocks != oldsize)
ctl_lun_capacity_changed(cbe_lun);
/* Tell the user the exact size we ended up using */
params->lun_size_bytes = be_lun->size_bytes;
sx_xunlock(&softc->modify_lock);
req->status = error ? CTL_LUN_WARNING : CTL_LUN_OK;
return (0);
bailout_error:
sx_xunlock(&softc->modify_lock);
req->status = CTL_LUN_ERROR;
return (0);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static void
ctl_be_block_lun_shutdown(struct ctl_be_lun *cbe_lun)
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
{
struct ctl_be_block_lun *be_lun = (struct ctl_be_block_lun *)cbe_lun;
struct ctl_be_block_softc *softc = be_lun->softc;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
taskqueue_drain_all(be_lun->io_taskqueue);
taskqueue_free(be_lun->io_taskqueue);
if (be_lun->disk_stats != NULL)
devstat_remove_entry(be_lun->disk_stats);
nvlist_destroy(be_lun->cbe_lun.options);
free(be_lun->dev_path, M_CTLBLK);
mtx_destroy(&be_lun->queue_lock);
mtx_destroy(&be_lun->io_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
mtx_lock(&softc->lock);
be_lun->flags |= CTL_BE_BLOCK_LUN_UNCONFIGURED;
if (be_lun->flags & CTL_BE_BLOCK_LUN_WAITING)
wakeup(be_lun);
else
free(be_lun, M_CTLBLK);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
mtx_unlock(&softc->lock);
}
static int
ctl_be_block_config_write(union ctl_io *io)
{
struct ctl_be_block_lun *be_lun;
struct ctl_be_lun *cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int retval;
DPRINTF("entered\n");
cbe_lun = CTL_BACKEND_LUN(io);
be_lun = (struct ctl_be_block_lun *)cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
retval = 0;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
switch (io->scsiio.cdb[0]) {
case SYNCHRONIZE_CACHE:
case SYNCHRONIZE_CACHE_16:
case WRITE_SAME_10:
case WRITE_SAME_16:
case UNMAP:
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
/*
* The upper level CTL code will filter out any CDBs with
* the immediate bit set and return the proper error.
*
* We don't really need to worry about what LBA range the
* user asked to be synced out. When they issue a sync
* cache command, we'll sync out the whole thing.
*/
mtx_lock(&be_lun->queue_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
STAILQ_INSERT_TAIL(&be_lun->config_write_queue, &io->io_hdr,
links);
mtx_unlock(&be_lun->queue_lock);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
taskqueue_enqueue(be_lun->io_taskqueue, &be_lun->io_task);
break;
case START_STOP_UNIT: {
struct scsi_start_stop_unit *cdb;
struct ctl_lun_req req;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
cdb = (struct scsi_start_stop_unit *)io->scsiio.cdb;
if ((cdb->how & SSS_PC_MASK) != 0) {
ctl_set_success(&io->scsiio);
ctl_config_write_done(io);
break;
}
if (cdb->how & SSS_START) {
if ((cdb->how & SSS_LOEJ) && be_lun->vn == NULL) {
retval = ctl_be_block_open(be_lun, &req);
cbe_lun->flags &= ~CTL_LUN_FLAG_EJECTED;
if (retval == 0) {
cbe_lun->flags &= ~CTL_LUN_FLAG_NO_MEDIA;
ctl_lun_has_media(cbe_lun);
} else {
cbe_lun->flags |= CTL_LUN_FLAG_NO_MEDIA;
ctl_lun_no_media(cbe_lun);
}
}
ctl_start_lun(cbe_lun);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
} else {
ctl_stop_lun(cbe_lun);
if (cdb->how & SSS_LOEJ) {
cbe_lun->flags |= CTL_LUN_FLAG_NO_MEDIA;
cbe_lun->flags |= CTL_LUN_FLAG_EJECTED;
ctl_lun_ejected(cbe_lun);
if (be_lun->vn != NULL)
ctl_be_block_close(be_lun);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
ctl_set_success(&io->scsiio);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_config_write_done(io);
break;
}
case PREVENT_ALLOW:
ctl_set_success(&io->scsiio);
ctl_config_write_done(io);
break;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
default:
ctl_set_invalid_opcode(&io->scsiio);
ctl_config_write_done(io);
retval = CTL_RETVAL_COMPLETE;
break;
}
return (retval);
}
static int
ctl_be_block_config_read(union ctl_io *io)
{
struct ctl_be_block_lun *be_lun;
int retval = 0;
DPRINTF("entered\n");
be_lun = (struct ctl_be_block_lun *)CTL_BACKEND_LUN(io);
switch (io->scsiio.cdb[0]) {
case SERVICE_ACTION_IN:
if (io->scsiio.cdb[1] == SGLS_SERVICE_ACTION) {
mtx_lock(&be_lun->queue_lock);
STAILQ_INSERT_TAIL(&be_lun->config_read_queue,
&io->io_hdr, links);
mtx_unlock(&be_lun->queue_lock);
taskqueue_enqueue(be_lun->io_taskqueue,
&be_lun->io_task);
retval = CTL_RETVAL_QUEUED;
break;
}
ctl_set_invalid_field(&io->scsiio,
/*sks_valid*/ 1,
/*command*/ 1,
/*field*/ 1,
/*bit_valid*/ 1,
/*bit*/ 4);
ctl_config_read_done(io);
retval = CTL_RETVAL_COMPLETE;
break;
default:
ctl_set_invalid_opcode(&io->scsiio);
ctl_config_read_done(io);
retval = CTL_RETVAL_COMPLETE;
break;
}
return (retval);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}
static int
ctl_be_block_lun_info(struct ctl_be_lun *cbe_lun, struct sbuf *sb)
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
{
struct ctl_be_block_lun *lun = (struct ctl_be_block_lun *)cbe_lun;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
int retval;
retval = sbuf_printf(sb, "\t<num_threads>");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
if (retval != 0)
goto bailout;
retval = sbuf_printf(sb, "%d", lun->num_threads);
if (retval != 0)
goto bailout;
retval = sbuf_printf(sb, "</num_threads>\n");
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
bailout:
return (retval);
}
static uint64_t
ctl_be_block_lun_attr(struct ctl_be_lun *cbe_lun, const char *attrname)
{
struct ctl_be_block_lun *lun = (struct ctl_be_block_lun *)cbe_lun;
if (lun->getattr == NULL)
return (UINT64_MAX);
return (lun->getattr(lun, attrname));
}
static int
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
ctl_be_block_init(void)
{
struct ctl_be_block_softc *softc = &backend_block_softc;
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
sx_init(&softc->modify_lock, "ctlblock modify");
mtx_init(&softc->lock, "ctlblock", NULL, MTX_DEF);
softc->beio_zone = uma_zcreate("beio", sizeof(struct ctl_be_block_io),
NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
softc->bufmin_zone = uma_zcreate("ctlblockmin", CTLBLK_MIN_SEG,
NULL, NULL, NULL, NULL, /*align*/ 0, /*flags*/0);
if (CTLBLK_MIN_SEG < CTLBLK_MAX_SEG)
softc->bufmax_zone = uma_zcreate("ctlblockmax", CTLBLK_MAX_SEG,
NULL, NULL, NULL, NULL, /*align*/ 0, /*flags*/0);
SLIST_INIT(&softc->lun_list);
return (0);
}
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
static int
ctl_be_block_shutdown(void)
{
struct ctl_be_block_softc *softc = &backend_block_softc;
struct ctl_be_block_lun *lun;
mtx_lock(&softc->lock);
while ((lun = SLIST_FIRST(&softc->lun_list)) != NULL) {
SLIST_REMOVE_HEAD(&softc->lun_list, links);
softc->num_luns--;
/*
* Drop our lock here. Since ctl_remove_lun() can call
* back into us, this could potentially lead to a recursive
* lock of the same mutex, which would cause a hang.
*/
mtx_unlock(&softc->lock);
ctl_remove_lun(&lun->cbe_lun);
mtx_lock(&softc->lock);
}
mtx_unlock(&softc->lock);
uma_zdestroy(softc->bufmin_zone);
if (CTLBLK_MIN_SEG < CTLBLK_MAX_SEG)
uma_zdestroy(softc->bufmax_zone);
uma_zdestroy(softc->beio_zone);
mtx_destroy(&softc->lock);
sx_destroy(&softc->modify_lock);
return (0);
Add the CAM Target Layer (CTL). CTL is a disk and processor device emulation subsystem originally written for Copan Systems under Linux starting in 2003. It has been shipping in Copan (now SGI) products since 2005. It was ported to FreeBSD in 2008, and thanks to an agreement between SGI (who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is available under a BSD-style license. The intent behind the agreement was that Spectra would work to get CTL into the FreeBSD tree. Some CTL features: - Disk and processor device emulation. - Tagged queueing - SCSI task attribute support (ordered, head of queue, simple tags) - SCSI implicit command ordering support. (e.g. if a read follows a mode select, the read will be blocked until the mode select completes.) - Full task management support (abort, LUN reset, target reset, etc.) - Support for multiple ports - Support for multiple simultaneous initiators - Support for multiple simultaneous backing stores - Persistent reservation support - Mode sense/select support - Error injection support - High Availability support (1) - All I/O handled in-kernel, no userland context switch overhead. (1) HA Support is just an API stub, and needs much more to be fully functional. ctl.c: The core of CTL. Command handlers and processing, character driver, and HA support are here. ctl.h: Basic function declarations and data structures. ctl_backend.c, ctl_backend.h: The basic CTL backend API. ctl_backend_block.c, ctl_backend_block.h: The block and file backend. This allows for using a disk or a file as the backing store for a LUN. Multiple threads are started to do I/O to the backing device, primarily because the VFS API requires that to get any concurrency. ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a small amount of memory to act as a source and sink for reads and writes from an initiator. Therefore it cannot be used for any real data, but it can be used to test for throughput. It can also be used to test initiators' support for extremely large LUNs. ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes, and command handler functions defined for supported opcodes. ctl_debug.h: Debugging support. ctl_error.c, ctl_error.h: CTL-specific wrappers around the CAM sense building functions. ctl_frontend.c, ctl_frontend.h: These files define the basic CTL frontend port API. ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM. This frontend allows for using CTL without any target-capable hardware. So any LUNs you create in CTL are visible in CAM via this port. ctl_frontend_internal.c, ctl_frontend_internal.h: This is a frontend port written for Copan to do some system-specific tasks that required sending commands into CTL from inside the kernel. This isn't entirely relevant to FreeBSD in general, but can perhaps be repurposed. ctl_ha.h: This is a stubbed-out High Availability API. Much more is needed for full HA support. See the comments in the header and the description of what is needed in the README.ctl.txt file for more details. ctl_io.h: This defines most of the core CTL I/O structures. union ctl_io is conceptually very similar to CAM's union ccb. ctl_ioctl.h: This defines all ioctls available through the CTL character device, and the data structures needed for those ioctls. ctl_mem_pool.c, ctl_mem_pool.h: Generic memory pool implementation used by the internal frontend. ctl_private.h: Private data structres (e.g. CTL softc) and function prototypes. This also includes the SCSI vendor and product names used by CTL. ctl_scsi_all.c, ctl_scsi_all.h: CTL wrappers around CAM sense printing functions. ctl_ser_table.c: Command serialization table. This defines what happens when one type of command is followed by another type of command. ctl_util.c, ctl_util.h: CTL utility functions, primarily designed to be used from userland. See ctladm for the primary consumer of these functions. These include CDB building functions. scsi_ctl.c: CAM target peripheral driver and CTL frontend port. This is the path into CTL for commands from target-capable hardware/SIMs. README.ctl.txt: CTL code features, roadmap, to-do list. usr.sbin/Makefile: Add ctladm. ctladm/Makefile, ctladm/ctladm.8, ctladm/ctladm.c, ctladm/ctladm.h, ctladm/util.c: ctladm(8) is the CTL management utility. It fills a role similar to camcontrol(8). It allow configuring LUNs, issuing commands, injecting errors and various other control functions. usr.bin/Makefile: Add ctlstat. ctlstat/Makefile ctlstat/ctlstat.8, ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8). It reports I/O statistics for CTL. sys/conf/files: Add CTL files. sys/conf/NOTES: Add device ctl. sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB length field is now 2 bytes long. Add several mode page definitions for CTL. sys/cam/scsi_all.c: Handle the new 2 byte inquiry length. sys/dev/ciss/ciss.c, sys/dev/ata/atapi-cam.c, sys/cam/scsi/scsi_targ_bh.c, scsi_target/scsi_cmds.c, mlxcontrol/interface.c: Update for 2 byte inquiry length field. scsi_da.h: Add versions of the format and rigid disk pages that are in a more reasonable format for CTL. amd64/conf/GENERIC, i386/conf/GENERIC, ia64/conf/GENERIC, sparc64/conf/GENERIC: Add device ctl. i386/conf/PAE: The CTL frontend SIM at least does not compile cleanly on PAE. Sponsored by: Copan Systems, SGI and Spectra Logic MFC after: 1 month
2012-01-12 00:34:33 +00:00
}