d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
30fca3b0cc
freebsd-nq/usr.bin/grep/Makefile

93 lines
1.9 KiB
Makefile
Raw Normal View History

- Adjust a comment to actual behaviour - Makefile nit - Add more CVS/SVN keywords to make it easier to track changes from NetBSD in case they add further improvements Approved by: delphij (mentor) Obtained from: The NetBSD Project
2011-04-07 13:03:35 +00:00
# $NetBSD: Makefile,v 1.4 2011/02/16 01:31:33 joerg Exp $
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
# $FreeBSD$
# $OpenBSD: Makefile,v 1.6 2003/06/25 15:00:04 millert Exp $
Use src.opts.mk in preference to bsd.own.mk except where we need stuff from the latter.
2014-05-06 04:22:01 +00:00
.include <src.opts.mk>
Build and install a BSD licensed grep. If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be '[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep will be 'gnugrep'. Discussed with: brooks
2011-05-25 01:04:12 +00:00
.if ${MK_BSD_GREP} == "yes"
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
PROG= grep
Build and install a BSD licensed grep. If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be '[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep will be 'gnugrep'. Discussed with: brooks
2011-05-25 01:04:12 +00:00
.else
PROG= bsdgrep
Update BSD grep to the latest development version. It has some code backported that was written for the TRE integration project in Google Summer of Code 2011. This is a temporary solution until the whole regex library is not replaced so that BSD grep development can continue and the backported code gets some review and testing. This change only improves scalability slightly, there is no big performance boost yet but several minor bugs have been found and fixed. Approved by: delphij (mentor) Sposored by: Google Summer of Code 2011 MFC after: 1 week
2011-10-05 09:56:43 +00:00
CLEANFILES+= bsdgrep.1
bsdgrep.1: grep.1
Fix incremental builds involving non-root users with read-only source files. Makefiles should not assume that source files can be overwritten. This is the common case for Perforce source trees. This is a followup commit to r211243 in the same vein. MFC after: 1 month Sponsored by: Spectra Logic MFSpectraBSD: r1036319 on 2014/01/29, r1046711 on 2014/03/06
2014-09-18 14:41:57 +00:00
cp -f ${.ALLSRC} ${.TARGET}
Build and install a BSD licensed grep. If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be '[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep will be 'gnugrep'. Discussed with: brooks
2011-05-25 01:04:12 +00:00
.endif
Update BSD grep to the latest development version. It has some code backported that was written for the TRE integration project in Google Summer of Code 2011. This is a temporary solution until the whole regex library is not replaced so that BSD grep development can continue and the backported code gets some review and testing. This change only improves scalability slightly, there is no big performance boost yet but several minor bugs have been found and fixed. Approved by: delphij (mentor) Sposored by: Google Summer of Code 2011 MFC after: 1 week
2011-10-05 09:56:43 +00:00
SRCS= file.c grep.c queue.c util.c
# Extra files ported backported form some regex improvements
.PATH: ${.CURDIR}/regex
SRCS+= fastmatch.c hashtable.c tre-compile.c tre-fastmatch.c xmalloc.c
CFLAGS+=-I${.CURDIR}/regex
- Adjust a comment to actual behaviour - Makefile nit - Add more CVS/SVN keywords to make it easier to track changes from NetBSD in case they add further improvements Approved by: delphij (mentor) Obtained from: The NetBSD Project
2011-04-07 13:03:35 +00:00
Build and install a BSD licensed grep. If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be '[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep will be 'gnugrep'. Discussed with: brooks
2011-05-25 01:04:12 +00:00
.if ${MK_BSD_GREP} == "yes"
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
LINKS= ${BINDIR}/grep ${BINDIR}/egrep \
${BINDIR}/grep ${BINDIR}/fgrep \
${BINDIR}/grep ${BINDIR}/zgrep \
${BINDIR}/grep ${BINDIR}/zegrep \
- Create links to the xz and lzma versions even if BSD grep is not the default. Nor GNU nor liblzma in base provides such functionality so it may be useful. MFC after: 3 days
2011-11-28 20:16:55 +00:00
${BINDIR}/grep ${BINDIR}/zfgrep
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
MLINKS= grep.1 egrep.1 \
grep.1 fgrep.1 \
grep.1 zgrep.1 \
grep.1 zegrep.1 \
Update BSD grep to the latest development version. It has some code backported that was written for the TRE integration project in Google Summer of Code 2011. This is a temporary solution until the whole regex library is not replaced so that BSD grep development can continue and the backported code gets some review and testing. This change only improves scalability slightly, there is no big performance boost yet but several minor bugs have been found and fixed. Approved by: delphij (mentor) Sposored by: Google Summer of Code 2011 MFC after: 1 week
2011-10-05 09:56:43 +00:00
grep.1 zfgrep.1 \
grep.1 xzgrep.1 \
grep.1 xzegrep.1 \
grep.1 xzfgrep.1 \
grep.1 lzgrep.1 \
grep.1 lzegrep.1 \
grep.1 lzfgrep.1
Build and install a BSD licensed grep. If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be '[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep will be 'gnugrep'. Discussed with: brooks
2011-05-25 01:04:12 +00:00
.endif
Following r226271, allow disabling lzma support with "WITHOUT_LZMA_SUPPORT". Correct r226271 which should have used WITHOUT_BZIP2_SUPPORT per r166255. Obtained from: Juniper Networks
2013-01-08 18:37:12 +00:00
LDADD= -lz
DPADD= ${LIBZ}
Don't test WITHOUT_FOO in program makefiles, test MK_FOO instead.
2014-04-01 14:24:32 +00:00
.if ${MK_LZMA_SUPPORT} != "no"
Following r226271, allow disabling lzma support with "WITHOUT_LZMA_SUPPORT". Correct r226271 which should have used WITHOUT_BZIP2_SUPPORT per r166255. Obtained from: Juniper Networks
2013-01-08 18:37:12 +00:00
LDADD+= -llzma
DPADD+= ${LIBLZMA}
- Create links to the xz and lzma versions even if BSD grep is not the default. Nor GNU nor liblzma in base provides such functionality so it may be useful. MFC after: 3 days
2011-11-28 20:16:55 +00:00
LINKS+= ${BINDIR}/${PROG} ${BINDIR}/xzgrep \
${BINDIR}/${PROG} ${BINDIR}/xzegrep \
${BINDIR}/${PROG} ${BINDIR}/xzfgrep \
${BINDIR}/${PROG} ${BINDIR}/lzgrep \
${BINDIR}/${PROG} ${BINDIR}/lzegrep \
${BINDIR}/${PROG} ${BINDIR}/lzfgrep
Following r226271, allow disabling lzma support with "WITHOUT_LZMA_SUPPORT". Correct r226271 which should have used WITHOUT_BZIP2_SUPPORT per r166255. Obtained from: Juniper Networks
2013-01-08 18:37:12 +00:00
.else
CFLAGS+= -DWITHOUT_LZMA
.endif
- Create links to the xz and lzma versions even if BSD grep is not the default. Nor GNU nor liblzma in base provides such functionality so it may be useful. MFC after: 3 days
2011-11-28 20:16:55 +00:00
Don't test WITHOUT_FOO in program makefiles, test MK_FOO instead.
2014-04-01 14:24:32 +00:00
.if ${MK_BZIP2_SUPPORT} != "no"
- Use getprogname() instead of __progname - Allow disabling bzip2 support with WITHOUT_BZIP2 - Fix handling patterns that start with a dot - Remove superfluous semicolon Approved by: delphij (mentor)
2011-10-11 22:27:23 +00:00
LDADD+= -lbz2
DPADD+= ${LIBBZ2}
- Fix installation when WITH_BSD_GREP is set to yes Submitted by: Aleksandr Rybalko <ray@ddteam.net>
2011-10-23 16:04:07 +00:00
.if ${MK_BSD_GREP} == "yes"
- Use getprogname() instead of __progname - Allow disabling bzip2 support with WITHOUT_BZIP2 - Fix handling patterns that start with a dot - Remove superfluous semicolon Approved by: delphij (mentor)
2011-10-11 22:27:23 +00:00
LINKS+= ${BINDIR}/grep ${BINDIR}/bzgrep \
${BINDIR}/grep ${BINDIR}/bzegrep \
${BINDIR}/grep ${BINDIR}/bzfgrep
MLINKS+= grep.1 bzgrep.1 \
grep.1 bzegrep.1 \
grep.1 bzfgrep.1
- Fix installation when WITH_BSD_GREP is set to yes Submitted by: Aleksandr Rybalko <ray@ddteam.net>
2011-10-23 16:04:07 +00:00
.endif
- Use getprogname() instead of __progname - Allow disabling bzip2 support with WITHOUT_BZIP2 - Fix handling patterns that start with a dot - Remove superfluous semicolon Approved by: delphij (mentor)
2011-10-11 22:27:23 +00:00
.else
CFLAGS+= -DWITHOUT_BZIP2
.endif
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
Don't test WITHOUT_FOO in program makefiles, test MK_FOO instead.
2014-04-01 14:24:32 +00:00
.if ${MK_GNU_GREP_COMPAT} != "no"
Adjust CFLAGS to pick up correct regex.h and posix/regex.h. Note this actually reverts r250860 and r250861. Reported by: gjb, tinderbox
2013-06-06 11:59:38 +00:00
CFLAGS+= -I${DESTDIR}/usr/include/gnu
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
LDADD+= -lgnuregex
DPADD+= ${LIBGNUREGEX}
.endif
Don't test WITHOUT_FOO in program makefiles, test MK_FOO instead.
2014-04-01 14:24:32 +00:00
.if ${MK_NLS} != "no"
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
.include "${.CURDIR}/nls/Makefile.inc"
.else
CFLAGS+= -DWITHOUT_NLS
.endif
Integrate usr.bin/grep/tests from NetBSD into atf/kyua Sponsored by: EMC / Isilon Storage Division
2014-10-09 01:53:23 +00:00
.if ${MK_TESTS} != "no"
SUBDIR+= tests
.endif
Add BSD grep to the base system and make it our default grep. Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC), lower memory usage than GNU grep, GNU compatibility, BSD license. TODO: Performance is somewhat behind GNU grep but it is only significant for bigger searches. The reason is complex, the most important factor is that GNU grep uses lots of optimizations to improve the speed of the regex library. First, we need a modern regex library (practically by adopting TRE), add support for GNU-style non-standard regexes and then reevalute the performance issues and look for bottlenecks. In the meantime, for those, who need better performance, it is possible to build GNU grep by setting WITH_GNU_GREP. Approved by: delphij (mentor) Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/), freegrep (http://github.com/howardjp/freegrep) Sponsored by: Google SoC 2008 Portbuild tests run by: kris, pav, erwin Acknowledgements to: fjoe (as SoC 2008 mentor), everyone who helped in reviewing and testing
2010-07-22 19:11:57 +00:00
.include <bsd.prog.mk>
Reference in New Issue Copy Permalink