freebsd-nq/sys/i386/isa/sound/uart6850.c

/*
 * sound/uart6850.c
 * 
 * Copyright by Hannu Savolainen 1993
 * 
 * Mon Nov 22 22:38:35 MET 1993 marco@driq.home.usn.nl: added 6850 support, used
 * with COVOX SoundMaster II and custom cards.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: 1. Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer. 2.
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 */

#include <i386/isa/sound/sound_config.h>

#if	NSND > 0

#if 1
/* #if defined(CONFIG_UART6850) && defined(CONFIG_MIDI) */

#define	DATAPORT   (uart6850_base)	/* * * Midi6850 Data I/O Port on IBM */
#define	COMDPORT   (uart6850_base+1)	/* * * Midi6850 Command Port on IBM   */
#define	STATPORT   (uart6850_base+1)	/* * * Midi6850 Status Port on IBM   */

#define uart6850_status()		inb( STATPORT)
#define input_avail()		(uart6850_status()&INPUT_AVAIL)
#define output_ready()		(uart6850_status()&OUTPUT_READY)
#define uart6850_cmd(cmd)	outb( COMDPORT,  cmd)
#define uart6850_read()		inb( DATAPORT)
#define uart6850_write(byte)	outb( DATAPORT,  byte)

#define	OUTPUT_READY	0x02	/* * * Mask for Data Read Ready Bit   */
#define	INPUT_AVAIL	0x01	/* * * Mask for Data Send Ready Bit   */

#define	UART_RESET	0x95	/* * * 6850 Total Reset Command   */
#define	UART_MODE_ON	0x03	/* * * 6850 Send/Receive UART Mode   */

static int      uart6850_opened = 0;
static int      uart6850_base = 0x330;
static int      uart6850_irq;
static int      uart6850_detected = 0;
static int      my_dev;

static int      reset_uart6850(void);
static void     (*midi_input_intr) (int dev, u_char data);
static void     poll_uart6850(void *dummy);


static sound_os_info *uart6850_osp;

static void
uart6850_input_loop(void)
{
    int             count;

    count = 10;

    while (count)		/* Not timed out */
	if (input_avail()) {
	    u_char   c = uart6850_read();

	    count = 100;

	    if (uart6850_opened & OPEN_READ)
		midi_input_intr(my_dev, c);
	    } else
		while (!input_avail() && count)
		    count--;
}

void
m6850intr(int irq)
{
    if (input_avail())
	uart6850_input_loop();
}

/*
 * It looks like there is no input interrupts in the UART mode. Let's try
 * polling.
 */

static void
poll_uart6850(void * dummy)
{
    u_long   flags;

    if (!(uart6850_opened & OPEN_READ))
	return;		/* Device has been closed */

    flags = splhigh();

    if (input_avail())
	uart6850_input_loop();


    timeout( poll_uart6850, 0, 1);	/* Come back later */

    splx(flags);
}

static int
uart6850_open(int dev, int mode,
	      void (*input) (int dev, u_char data),
	      void (*output) (int dev)
)
{
    if (uart6850_opened) {
	printf("Midi6850: Midi busy\n");
	return -(EBUSY);
    }
    uart6850_cmd(UART_RESET);

    uart6850_input_loop();

    midi_input_intr = input;
    uart6850_opened = mode;
    poll_uart6850(0);	/* Enable input polling */

    return 0;
}

static void
uart6850_close(int dev)
{
    uart6850_cmd(UART_MODE_ON);

    uart6850_opened = 0;
}

static int
uart6850_out(int dev, u_char midi_byte)
{
    int             timeout;
    u_long   flags;

    /*
     * Test for input since pending input seems to block the output.
     */

    flags = splhigh();

    if (input_avail())
	uart6850_input_loop();

    splx(flags);

    /*
     * Sometimes it takes about 13000 loops before the output becomes
     * ready (After reset). Normally it takes just about 10 loops.
     */

    for (timeout = 30000; timeout > 0 && !output_ready(); timeout--);	/* Wait */

    if (!output_ready()) {
	printf("Midi6850: Timeout\n");
	return 0;
    }
    uart6850_write(midi_byte);
    return 1;
}

static int
uart6850_command(int dev, u_char *midi_byte)
{
    return 1;
}

static int
uart6850_start_read(int dev)
{
    return 0;
}

static int
uart6850_end_read(int dev)
{
    return 0;
}

static int
uart6850_ioctl(int dev, u_int cmd, ioctl_arg arg)
{
    return -(EINVAL);
}

static void
uart6850_kick(int dev)
{
}

static int
uart6850_buffer_status(int dev)
{
    return 0;		/* No data in buffers */
}

#define MIDI_SYNTH_NAME	"6850 UART Midi"
#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
#include <i386/isa/sound/midi_synth.h>

static struct midi_operations uart6850_operations =
{
	{"6850 UART", 0, 0, SNDCARD_UART6850},
	&std_midi_synth,
	{0},
	uart6850_open,
	uart6850_close,
	uart6850_ioctl,
	uart6850_out,
	uart6850_start_read,
	uart6850_end_read,
	uart6850_kick,
	uart6850_command,
	uart6850_buffer_status
};


void
attach_uart6850(struct address_info * hw_config)
{
    int             ok, timeout;
    u_long   flags;

    if (num_midis >= MAX_MIDI_DEV) {
	printf("Sound: Too many midi devices detected\n");
	return ;
    }
    uart6850_base = hw_config->io_base;
    uart6850_osp = hw_config->osp;
    uart6850_irq = hw_config->irq;

    if (!uart6850_detected)
	return ;

    flags = splhigh();

    for (timeout = 30000; timeout < 0 && !output_ready(); timeout--);	/* Wait */
    uart6850_cmd(UART_MODE_ON);

    ok = 1;

    splx(flags);

    conf_printf("6850 Midi Interface", hw_config);

    std_midi_synth.midi_dev = my_dev = num_midis;
    midi_devs[num_midis++] = &uart6850_operations;
    return ;
}

static int
reset_uart6850(void)
{
    uart6850_read();
    return 1;		/* OK */
}


int
probe_uart6850(struct address_info * hw_config)
{
    int             ok = 0;

    uart6850_osp = hw_config->osp;
    uart6850_base = hw_config->io_base;
    uart6850_irq = hw_config->irq;

    if (snd_set_irq_handler(uart6850_irq, m6850intr, uart6850_osp) < 0)
	return 0;

    ok = reset_uart6850();

    uart6850_detected = ok;
    return ok;
}

#endif
#endif