freebsd-nq/sys/kern/subr_hints.c

522 lines
13 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2000,2001 Peter Wemm <peter@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/kenv.h>
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/bus.h>
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
#define FBACK_MDENV 0 /* MD env (e.g. loader.conf) */
#define FBACK_STENV 1 /* Static env */
#define FBACK_STATIC 2 /* static_hints */
/*
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
* We'll use hintenv_merged to indicate that the dynamic environment has been
* properly prepared for hint usage. This implies that the dynamic environment
* has already been setup (dynamic_kenv) and that we have added any supplied
* static_hints to the dynamic environment.
*/
static bool hintenv_merged;
/* Static environment and static hints cannot change, so we'll skip known bad */
static bool stenv_skip;
static bool sthints_skip;
/*
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
* Access functions for device resources.
*/
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
static void
static_hints_to_env(void *data __unused)
{
const char *cp;
char *line, *eq;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
int eqidx, i;
cp = static_hints;
while (cp && *cp != '\0') {
eq = strchr(cp, '=');
if (eq == NULL)
/* Bad hint value */
continue;
eqidx = eq - cp;
i = strlen(cp);
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
line = malloc(i + 1, M_TEMP, M_WAITOK);
strcpy(line, cp);
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
line[eqidx] = line[i] = '\0';
/*
* Before adding a hint to the dynamic environment, check if
* another value for said hint has already been added. This is
* needed because static environment overrides static hints and
* dynamic environment overrides all.
*/
if (testenv(line) == 0)
kern_setenv(line, line + eqidx + 1);
free(line, M_TEMP);
cp += i + 1;
}
hintenv_merged = true;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:25:48 +00:00
}
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
/* Any time after dynamic env is setup */
SYSINIT(hintenv, SI_SUB_KMEM + 1, SI_ORDER_SECOND, static_hints_to_env, NULL);
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
/*
* Checks the environment to see if we even have any hints. If it has no hints,
* then res_find can take the hint that there's no point in searching it and
* either move on to the next environment or fail early.
*/
static bool
_res_checkenv(char *envp)
{
char *cp;
cp = envp;
while (cp) {
if (strncmp(cp, "hint.", 5) == 0)
return (true);
while (*cp != '\0')
cp++;
cp++;
if (*cp == '\0')
break;
}
return (false);
}
/*
* Evil wildcarding resource string lookup.
* This walks the supplied env string table and returns a match.
* The start point can be remembered for incremental searches.
*/
static int
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
res_find(char **hintp_cookie, int *line, int *startln,
const char *name, int *unit, const char *resname, const char *value,
const char **ret_name, int *ret_namelen, int *ret_unit,
const char **ret_resname, int *ret_resnamelen, const char **ret_value)
{
int fbacklvl = FBACK_MDENV, i = 0, n = 0, namelen;
char r_name[32];
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
int r_unit;
char r_resname[32];
char r_value[128];
const char *s, *cp;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
char *hintp, *p;
bool dyn_used = false;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
/*
* We are expecting that the caller will pass us a hintp_cookie that
* they are tracking. Upon entry, if *hintp_cookie is *not* set, this
* indicates to us that we should be figuring out based on the current
* environment where to search. This keeps us sane throughout the
* entirety of a single search.
*/
if (*hintp_cookie == NULL) {
hintp = NULL;
if (hintenv_merged) {
/*
* static_hints, if it was previously used, has
* already been folded in to the environment
* by this point.
*/
mtx_lock(&kenv_lock);
cp = kenvp[0];
for (i = 0; cp != NULL; cp = kenvp[++i]) {
if (!strncmp(cp, "hint.", 5)) {
hintp = kenvp[0];
break;
}
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:25:48 +00:00
}
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
mtx_unlock(&kenv_lock);
dyn_used = true;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
} else {
/*
* We'll have a chance to keep coming back here until
* we've actually exhausted all of our possibilities.
* We might have chosen the MD/Static env because it
* had some kind of hints, but perhaps it didn't have
* the hint we are looking for. We don't provide any
* fallback when searching the dynamic environment.
*/
fallback:
if (dyn_used || fbacklvl >= FBACK_STATIC)
return (ENOENT);
switch (fbacklvl) {
case FBACK_MDENV:
fbacklvl++;
if (_res_checkenv(md_envp)) {
hintp = md_envp;
break;
}
/* FALLTHROUGH */
case FBACK_STENV:
fbacklvl++;
if (!stenv_skip && _res_checkenv(kern_envp)) {
hintp = kern_envp;
break;
} else
stenv_skip = true;
/* FALLTHROUGH */
case FBACK_STATIC:
fbacklvl++;
/* We'll fallback to static_hints if needed/can */
if (!sthints_skip &&
_res_checkenv(static_hints))
hintp = static_hints;
else
sthints_skip = true;
break;
default:
return (ENOENT);
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
}
}
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
if (hintp == NULL)
return (ENOENT);
*hintp_cookie = hintp;
} else {
hintp = *hintp_cookie;
if (hintenv_merged && hintp == kenvp[0])
dyn_used = true;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
else
/*
* If we aren't using the dynamic environment, we need
* to run through the proper fallback procedure again.
* This is so that we do continuations right if we're
* working with *line and *startln.
*/
goto fallback;
}
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
if (dyn_used) {
mtx_lock(&kenv_lock);
i = 0;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
}
if (name)
namelen = strlen(name);
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
cp = hintp;
while (cp) {
(*line)++;
if (strncmp(cp, "hint.", 5) != 0)
goto nexthint;
if (name && strncmp(cp + 5, name, namelen) != 0)
goto nexthint;
n = sscanf(cp + 5, "%32[^.].%d.%32[^=]=%127s", r_name, &r_unit,
r_resname, r_value);
if (n != 4) {
printf("CONFIG: invalid hint '%s'\n", cp);
p = strchr(cp, 'h');
*p = 'H';
goto nexthint;
}
if (startln && *startln >= 0 && *line < *startln)
goto nexthint;
if (name && strcmp(name, r_name) != 0)
goto nexthint;
if (unit && *unit != r_unit)
goto nexthint;
if (resname && strcmp(resname, r_resname) != 0)
goto nexthint;
if (value && strcmp(value, r_value) != 0)
goto nexthint;
/* Successfully found a hint matching all criteria */
break;
nexthint:
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
if (dyn_used) {
cp = kenvp[++i];
if (cp == NULL)
break;
} else {
while (*cp != '\0')
cp++;
cp++;
if (*cp == '\0') {
cp = NULL;
break;
}
}
}
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
if (dyn_used)
mtx_unlock(&kenv_lock);
if (cp == NULL)
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
goto fallback;
s = cp;
/* This is a bit of a hack, but at least is reentrant */
/* Note that it returns some !unterminated! strings. */
s = strchr(s, '.') + 1; /* start of device */
if (ret_name)
*ret_name = s;
s = strchr(s, '.') + 1; /* start of unit */
if (ret_namelen && ret_name)
*ret_namelen = s - *ret_name - 1; /* device length */
if (ret_unit)
*ret_unit = r_unit;
s = strchr(s, '.') + 1; /* start of resname */
if (ret_resname)
*ret_resname = s;
s = strchr(s, '=') + 1; /* start of value */
if (ret_resnamelen && ret_resname)
*ret_resnamelen = s - *ret_resname - 1; /* value len */
if (ret_value)
*ret_value = s;
if (startln) /* line number for anchor */
*startln = *line + 1;
return 0;
}
/*
* Search all the data sources for matches to our query. We look for
* dynamic hints first as overrides for static or fallback hints.
*/
static int
resource_find(int *line, int *startln,
const char *name, int *unit, const char *resname, const char *value,
const char **ret_name, int *ret_namelen, int *ret_unit,
const char **ret_resname, int *ret_resnamelen, const char **ret_value)
{
int i;
int un;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
char *hintp;
*line = 0;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
hintp = NULL;
/* Search for exact unit matches first */
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
i = res_find(&hintp, line, startln, name, unit, resname, value,
ret_name, ret_namelen, ret_unit, ret_resname, ret_resnamelen,
ret_value);
if (i == 0)
return 0;
if (unit == NULL)
return ENOENT;
/* If we are still here, search for wildcard matches */
un = -1;
kern_environment: use any provided environments, evict hintmode/envmode At the moment, hintmode and envmode are used to indicate whether static hints or static env have been provided in the kernel config(5) and the static versions are mutually exclusive with loader(8)-provided environment. hintmode *can* be reconfigured later to pull from the dynamic environment, thus taking advantage of the loader(8) or post-kmem environment setting. This changeset fixes both problems at once to move us from a semi-confusing state to a consistent state: if an environment file, hints file, or loader(8) environment are provided, we use them in a well-known order of precedence: - loader(8) environment - static environment - static hints file Once the dynamic environment is setup this becomes a moot point. The loader(8) and static environments are merged (respecting the above order of precedence), and the static hints are merged in on an as-needed basis after the dynamic environment has been setup. Hints lookup are changed to respect all of the above. Before the dynamic environment is setup, lookups use the above-mentioned order and fallback to the next environment if a matching hint is not found. Once the dynamic environment is setup, that is used on its own since it captures all of the above information plus any dynamic kenv settings that came up later in boot. The following tangentially related changes were made to res_find: - A hintp cookie is now passed in so that related searches continue using the chain of environments (or dynamic environment) without relying on global state - All three environments will be searched if they actually have valid hints to use, rather than just choosing the first environment that actually had a hint and rolling with that only The hintmode sysctl has been ripped out. static_{env,hints}.disabled are still honored and will disable their respective environments from being used for hint lookups and from being merged into the dynamic environment, as expected. MFC after: 1 month (maybe) Differential Revision: https://reviews.freebsd.org/D15953
2018-07-05 16:30:32 +00:00
i = res_find(&hintp, line, startln, name, &un, resname, value,
ret_name, ret_namelen, ret_unit, ret_resname, ret_resnamelen,
ret_value);
if (i == 0)
return 0;
return ENOENT;
}
int
resource_int_value(const char *name, int unit, const char *resname, int *result)
{
int error;
const char *str;
char *op;
unsigned long val;
int line;
line = 0;
error = resource_find(&line, NULL, name, &unit, resname, NULL,
NULL, NULL, NULL, NULL, NULL, &str);
if (error)
return error;
if (*str == '\0')
return EFTYPE;
val = strtoul(str, &op, 0);
if (*op != '\0')
return EFTYPE;
*result = val;
return 0;
}
int
resource_long_value(const char *name, int unit, const char *resname,
long *result)
{
int error;
const char *str;
char *op;
unsigned long val;
int line;
line = 0;
error = resource_find(&line, NULL, name, &unit, resname, NULL,
NULL, NULL, NULL, NULL, NULL, &str);
if (error)
return error;
if (*str == '\0')
return EFTYPE;
val = strtoul(str, &op, 0);
if (*op != '\0')
return EFTYPE;
*result = val;
return 0;
}
int
resource_string_value(const char *name, int unit, const char *resname,
const char **result)
{
int error;
const char *str;
int line;
line = 0;
error = resource_find(&line, NULL, name, &unit, resname, NULL,
NULL, NULL, NULL, NULL, NULL, &str);
if (error)
return error;
*result = str;
return 0;
}
/*
* This is a bit nasty, but allows us to not modify the env strings.
*/
static const char *
resource_string_copy(const char *s, int len)
{
static char stringbuf[256];
static int offset = 0;
const char *ret;
if (len == 0)
len = strlen(s);
if (len > 255)
return NULL;
if ((offset + len + 1) > 255)
offset = 0;
bcopy(s, &stringbuf[offset], len);
stringbuf[offset + len] = '\0';
ret = &stringbuf[offset];
offset += len + 1;
return ret;
}
/*
* err = resource_find_match(&anchor, &name, &unit, resname, value)
* Iteratively fetch a list of devices wired "at" something
* res and value are restrictions. eg: "at", "scbus0".
* For practical purposes, res = required, value = optional.
* *name and *unit are set.
* set *anchor to zero before starting.
*/
int
resource_find_match(int *anchor, const char **name, int *unit,
const char *resname, const char *value)
{
const char *found_name;
int found_namelen;
int found_unit;
int ret;
int newln;
newln = *anchor;
ret = resource_find(anchor, &newln, NULL, NULL, resname, value,
&found_name, &found_namelen, &found_unit, NULL, NULL, NULL);
if (ret == 0) {
*name = resource_string_copy(found_name, found_namelen);
*unit = found_unit;
}
*anchor = newln;
return ret;
}
/*
* err = resource_find_dev(&anchor, name, &unit, res, value);
* Iterate through a list of devices, returning their unit numbers.
* res and value are optional restrictions. eg: "at", "scbus0".
* *unit is set to the value.
* set *anchor to zero before starting.
*/
int
resource_find_dev(int *anchor, const char *name, int *unit,
const char *resname, const char *value)
{
int found_unit;
int newln;
int ret;
newln = *anchor;
ret = resource_find(anchor, &newln, name, NULL, resname, value,
NULL, NULL, &found_unit, NULL, NULL, NULL);
if (ret == 0) {
*unit = found_unit;
}
*anchor = newln;
return ret;
}
/*
* Check to see if a device is disabled via a disabled hint.
*/
int
resource_disabled(const char *name, int unit)
{
int error, value;
error = resource_int_value(name, unit, "disabled", &value);
if (error)
return (0);
return (value);
}
Add a new device control utility for new-bus devices called devctl. This allows the user to request administrative changes to individual devices such as attach or detaching drivers or disabling and re-enabling devices. - Add a new /dev/devctl2 character device which uses ioctls for device requests. The ioctls use a common 'struct devreq' which is somewhat similar to 'struct ifreq'. - The ioctls identify the device to operate on via a string. This string can either by the device's name, or it can be a bus-specific address. (For unattached devices, a bus address is the only way to locate a device.) Bus drivers register an eventhandler to claim unrecognized device names that the driver recognizes as a valid address. Two buses currently support addresses: ACPI recognizes any device in the ACPI namespace via its full path starting with "\" and the PCI bus driver recognizes an address specification of 'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector strings supported by pciconf). - To make it easier to cut and paste, change the PnP location string in the PCI bus driver to output a full PCI selector string rather than 'slot=<slot> function=<func>'. - Add a devctl(3) interface in libdevctl which provides a wrapper around the ioctls and is the preferred interface for other userland code. - Add a devctl(8) program which is a simple wrapper around the requests supported by devctl(3). - Add a device_is_suspended() function to check DF_SUSPENDED. - Add a resource_unset_value() function that can be used to remove a hint from the kernel environment. This is used to clear a hint.<driver>.<unit>.disabled hint when re-enabling a boot-time disabled device. Reviewed by: imp (parts) Requested by: imp (changing PCI location string) Relnotes: yes
2015-02-06 16:09:01 +00:00
/*
* Clear a value associated with a device by removing it from
* the kernel environment. This only removes a hint for an
* exact unit.
*/
int
resource_unset_value(const char *name, int unit, const char *resname)
{
char varname[128];
const char *retname, *retvalue;
int error, line;
size_t len;
line = 0;
error = resource_find(&line, NULL, name, &unit, resname, NULL,
&retname, NULL, NULL, NULL, NULL, &retvalue);
if (error)
return (error);
retname -= strlen("hint.");
len = retvalue - retname - 1;
if (len > sizeof(varname) - 1)
return (ENAMETOOLONG);
memcpy(varname, retname, len);
varname[len] = '\0';
return (kern_unsetenv(varname));
}