freebsd-nq/lib/libdevdctl/guid.h

155 lines
4.0 KiB
C
Raw Normal View History

zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
/*-
* Copyright (c) 2012, 2013 Spectra Logic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* Authors: Alan Somers (Spectra Logic Corporation)
*
* $FreeBSD$
*/
/**
* \file devdctl_guid.h
*
* Definition of the Guid class.
*/
#ifndef _DEVDCTL_GUID_H_
#define _DEVDCTL_GUID_H_
/*============================ Namespace Control =============================*/
namespace DevdCtl
{
/*============================= Class Definitions ============================*/
/*----------------------------------- Guid -----------------------------------*/
/**
* \brief Object that represents guids.
*
* It can generally be manipulated as a uint64_t, but with a special
* value INVALID_GUID that does not equal any valid guid.
*
* As of this writing, this class is only used to represent ZFS
* guids in events and spa_generate_guid() in spa_misc.c explicitly
* refuses to return a guid of 0. So this class uses 0 as the value
* for INVALID_GUID. In the future, if 0 is allowed to be a valid
* guid, the implementation of this class must change.
*/
class Guid
{
public:
/* Constructors */
/* Default constructor: an Invalid guid */
Guid();
/* Construct a guid from a provided integer */
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
Guid(uint64_t guid);
/* Construct a guid from a string in base 8, 10, or 16 */
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
Guid(const std::string &guid);
static Guid InvalidGuid();
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
/* Assignment */
Guid& operator=(const Guid& rhs);
/* Test the validity of this guid. */
bool IsValid() const;
/* Comparison to other Guid operators */
bool operator==(const Guid& rhs) const;
bool operator!=(const Guid& rhs) const;
/* Integer conversion operators */
operator uint64_t() const;
operator bool() const;
protected:
static const uint64_t INVALID_GUID = 0;
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
/* The integer value of the GUID. */
uint64_t m_GUID;
};
//- Guid Inline Public Methods ------------------------------------------------
inline
Guid::Guid()
: m_GUID(INVALID_GUID)
{
}
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
inline
Guid::Guid(uint64_t guid)
: m_GUID(guid)
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
{
}
inline Guid
Guid::InvalidGuid()
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
{
return (Guid(INVALID_GUID));
zfsd(8), the ZFS fault management daemon Add zfsd, which deals with hard drive faults in ZFS pools. It manages hotspares and replements in drive slots that publish physical paths. cddl/usr.sbin/zfsd Add zfsd(8) and its unit tests cddl/usr.sbin/Makefile Add zfsd to the build lib/libdevdctl A C++ library that helps devd clients process events lib/Makefile share/mk/bsd.libnames.mk share/mk/src.libnames.mk Add libdevdctl to the build. It's a private library, unusable by out-of-tree software. etc/defaults/rc.conf By default, set zfsd_enable to NO etc/mtree/BSD.include.dist Add a directory for libdevdctl's include files etc/mtree/BSD.tests.dist Add a directory for zfsd's unit tests etc/mtree/BSD.var.dist Add /var/db/zfsd/cases, where zfsd stores case files while it's shut down. etc/rc.d/Makefile etc/rc.d/zfsd Add zfsd's rc script sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c Fix the resource.fs.zfs.statechange message. It had a number of problems: It was only being emitted on a transition to the HEALTHY state. That made it impossible for zfsd to take actions based on drives getting sicker. It compared the new state to vdev_prevstate, which is the state that the vdev had the last time it was opened. That doesn't make sense, because a vdev can change state multiple times without being reopened. vdev_set_state contains logic that will change the device's new state based on various conditions. However, the statechange event was being posted _before_ that logic took effect. Now it's being posted after. Submitted by: gibbs, asomers, mav, allanjude Reviewed by: mav, delphij Relnotes: yes Sponsored by: Spectra Logic Corp, iX Systems Differential Revision: https://reviews.freebsd.org/D6564
2016-05-28 17:43:40 +00:00
}
inline Guid&
Guid::operator=(const Guid &rhs)
{
m_GUID = rhs.m_GUID;
return (*this);
}
inline bool
Guid::IsValid() const
{
return (m_GUID != INVALID_GUID);
}
inline bool
Guid::operator==(const Guid& rhs) const
{
return (m_GUID == rhs.m_GUID);
}
inline bool
Guid::operator!=(const Guid& rhs) const
{
return (m_GUID != rhs.m_GUID);
}
inline
Guid::operator uint64_t() const
{
return (m_GUID);
}
inline
Guid::operator bool() const
{
return (m_GUID != INVALID_GUID);
}
/** Convert the GUID into its string representation */
std::ostream& operator<< (std::ostream& out, Guid g);
} // namespace DevdCtl
#endif /* _DEVDCTL_GUID_H_ */