d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
368bf0c2c6
freebsd-nq/sys/arm/conf/DOCKSTAR

157 lines
4.4 KiB
Plaintext
Raw Normal View History

Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
#
# Custom kernel for Seagate DockStar (Marvell SheevaPlug based) devices.
#
# $FreeBSD$
#
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$
#
Remove MODULES_OVERRIDE="" for Marvel-based armv5 systems. Also add some #NO_UNIVERSE to configs that essentially duplicate DB-88F6XXX.
2015-03-10 14:36:51 +00:00
#NO_UNIVERSE
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
ident DOCKSTAR
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
Clean up the ARM kernel configs to use 'include<space><tab>"file"'.
2015-05-07 12:38:23 +00:00
include "std.arm"
include "../mv/kirkwood/std.db88f6xxx"
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
options SOC_MV_KIRKWOOD
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
First pass clenup over the Marvell db-88f6xxx kernel configs.
2015-05-10 09:23:49 +00:00
options SOFTUPDATES # Enable FFS soft updates support
options NFSCL # Network Filesystem Client
options NFSLOCKD # Network Lock Manager
#options NFS_ROOT # NFS usable as /, requires NFSCL
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 filesystem
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options NULLFS # NULL filesystem
First pass clenup over the Marvell db-88f6xxx kernel configs.
2015-05-10 09:23:49 +00:00
options TMPFS # Efficient memory filesystem
options GEOM_PART_GPT # GUID Partition Tables
options GEOM_PART_BSD # BSD partition scheme
options GEOM_PART_MBR # MBR partition scheme
options GEOM_LABEL # Provides labelization
options GEOM_ELI # Disk encryption
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
First pass clenup over the Marvell db-88f6xxx kernel configs.
2015-05-10 09:23:49 +00:00
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
First pass clenup over the Marvell db-88f6xxx kernel configs.
2015-05-10 09:23:49 +00:00
# Enable these options for nfs root configured via BOOTP.
#options BOOTP
#options BOOTP_NFSROOT
#options BOOTP_NFSV3
#options BOOTP_WIRED_TO=mge0
# If not using BOOTP, use something like one of these...
#options ROOTDEVNAME=\"ufs:/dev/da0a\"
options ROOTDEVNAME=\"ufs:/dev/da0s1a\"
#options ROOTDEVNAME=\"ufs:/dev/da0p10\"
#options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\"
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# Misc pseudo devices
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
device bpf # Required for DHCP
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device firmware # firmware(9) required for USB wlan
device gif # IPv6 and IPv4 tunneling
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
device loop # Network loopback
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device md # Memory/malloc disk
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
device pty # BSD-style compatibility pseudo ttys
device random # Entropy device
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device tun # Packet tunnel.
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
device ether # Required for all ethernet devices
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device vlan # 802.1Q VLAN support
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
2014-03-16 15:22:46 +00:00
device wlan # 802.11 WLAN support
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# cam support for umass and ahci
device scbus
device pass
device da
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
# Serial ports
device uart
# Networking
device mge # Marvell Gigabit Ethernet controller
device mii
Add etherswitch support to mge This commit introduces support for etherswitch devices that utilize SMI as a way of accessing its registers. SMI register is located in address space of mge -- access to it was exported through MDIO interface. Attachment functions were enhanced so as to ensure proper initialisation in both cases: 1) PHYs attached directly to mge, 2) PHYs attached to switch device and switch attached to mge. Attachment of etherswitch device depends on dts entry with compatible="mrvl,sw" property. If none is found, typical PHY attachment procedure follows. In case of switch attached, PHYs' status and configuration is accessible via etherswitchcfg, and ifconfig shows always-up, non-configurable mge interfaces. Due to the fact that there may be simultaneous accessess to SMI registers (e.g. from PHY attached to one of mge instances and switch to the other), SMI access interlock was added. It is SX lock, because sleep ability is necessary -- busy-waiting would result in poor performance due to long delays required by hardware. Underlying switch driver is obliged to use sleepable locks as well. Reviewed by: adrian Obtained from: Semihalf Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D3900
2015-10-25 22:00:56 +00:00
device mdio
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
device e1000phy
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
2010-09-08 19:50:47 +00:00
# USB
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
options USB_HOST_ALIGN=32 # Align DMA to cacheline
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device usb # Basic usb support
device ehci # USB host controller
device umass # Mass storage
device uhid # Human-interface devices
device rum # Ralink Technology RT2501USB wireless NICs
device uath # Atheros AR5523 wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs
device zyd # ZyDAS zb1211/zb1211b wireless NICs
device urtw # Realtek RTL8187B/L USB
device upgt # Conexant/Intersil PrismGT SoftMAC USB
device u3g # USB-based 3G modems (Option, Huawei, Sierra)
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# I2C (TWSI)
device iic
device iicbus
Create the twsi device option in preparation to move the driver to a common location. The device is also found in Allwinner SoCs. Sponsored by: ABT Systems Ltd
2016-02-14 23:42:07 +00:00
device twsi
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# Sound
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device sound
device snd_uaudio
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
#crypto
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device cesa # Marvell security engine
device crypto
device cryptodev
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# IPSec
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device enc
options IPSEC
options IPSEC_NAT_T
options TCP_SIGNATURE # include support for RFC 2385
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# IPFW
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
options IPFIREWALL
options IPFIREWALL_DEFAULT_TO_ACCEPT
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=100
options IPFIREWALL_NAT
options LIBALIAS
options DUMMYNET
options IPDIVERT
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
#PF
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
device pf
device pflog
device pfsync
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
Mark gpio as "optional" in files.mv and edit Marvell's kernconfs Including arm/mv/gpio.c now depends on 'gpio' device. 'device gpio' was added to all kernconf files of Marvell boards, except ARMADAXP (dummy mv_gpio_res definition was removed) and ARMADA38X (not supported yet). This commit allows to use generic files.mv on A38X. Reviewed by: andrew Obtained from: Semihalf Sponsored by: Stormshield Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D4372
2016-01-20 11:57:11 +00:00
# GPIO
device gpio
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
# ALTQ, required for PF
Fix the indentation to simplify comparing the ARM config files.
2014-12-21 11:55:40 +00:00
options ALTQ # Basic ALTQ support
options ALTQ_CBQ # Class Based Queueing
options ALTQ_RED # Random Early Detection
options ALTQ_RIO # RED In/Out
options ALTQ_HFSC # Hierarchical Packet Scheduler
options ALTQ_CDNR # Traffic conditioner
options ALTQ_PRIQ # Priority Queueing
options ALTQ_NOPCC # Required if the TSC is unusable
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options). One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives. PR: kern/181975 arm/162159
2014-01-05 20:44:10 +00:00
#options ALTQ_DEBUG
First pass clenup over the Marvell db-88f6xxx kernel configs.
2015-05-10 09:23:49 +00:00
# Flattened Device Tree
options FDT # Configure using FDT/DTB data
options FDT_DTB_STATIC
makeoptions FDT_DTS_FILE=dockstar.dts
Reference in New Issue Copy Permalink