freebsd-nq/sys/dev/ipmi/ipmi.c

918 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#include <sys/bus.h>
#include <sys/condvar.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#include <sys/poll.h>
#include <sys/rman.h>
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#include <sys/selinfo.h>
#include <sys/sysctl.h>
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#include <sys/watchdog.h>
#ifdef LOCAL_MODULE
#include <ipmi.h>
#include <ipmivars.h>
#else
#include <sys/ipmi.h>
#include <dev/ipmi/ipmivars.h>
#endif
#ifdef IPMB
static int ipmi_ipmb_checksum(u_char, int);
static int ipmi_ipmb_send_message(device_t, u_char, u_char, u_char,
u_char, u_char, int)
#endif
static d_ioctl_t ipmi_ioctl;
static d_poll_t ipmi_poll;
static d_open_t ipmi_open;
static void ipmi_dtor(void *arg);
int ipmi_attached = 0;
static int on = 1;
SYSCTL_NODE(_hw, OID_AUTO, ipmi, CTLFLAG_RD, 0, "IPMI driver parameters");
SYSCTL_INT(_hw_ipmi, OID_AUTO, on, CTLFLAG_RW,
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
&on, 0, "");
static struct cdevsw ipmi_cdevsw = {
.d_version = D_VERSION,
.d_open = ipmi_open,
.d_ioctl = ipmi_ioctl,
.d_poll = ipmi_poll,
.d_name = "ipmi",
};
MALLOC_DEFINE(M_IPMI, "ipmi", "ipmi");
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static int
ipmi_open(struct cdev *cdev, int flags, int fmt, struct thread *td)
{
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_device *dev;
struct ipmi_softc *sc;
int error;
if (!on)
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (ENOENT);
/* Initialize the per file descriptor data. */
dev = malloc(sizeof(struct ipmi_device), M_IPMI, M_WAITOK | M_ZERO);
error = devfs_set_cdevpriv(dev, ipmi_dtor);
if (error) {
free(dev, M_IPMI);
return (error);
}
sc = cdev->si_drv1;
TAILQ_INIT(&dev->ipmi_completed_requests);
dev->ipmi_address = IPMI_BMC_SLAVE_ADDR;
dev->ipmi_lun = IPMI_BMC_SMS_LUN;
dev->ipmi_softc = sc;
IPMI_LOCK(sc);
sc->ipmi_opened++;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_UNLOCK(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (0);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static int
ipmi_poll(struct cdev *cdev, int poll_events, struct thread *td)
{
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_device *dev;
struct ipmi_softc *sc;
int revents = 0;
if (devfs_get_cdevpriv((void **)&dev))
return (0);
sc = cdev->si_drv1;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK(sc);
if (poll_events & (POLLIN | POLLRDNORM)) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (!TAILQ_EMPTY(&dev->ipmi_completed_requests))
revents |= poll_events & (POLLIN | POLLRDNORM);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (dev->ipmi_requests == 0)
revents |= POLLERR;
}
if (revents == 0) {
if (poll_events & (POLLIN | POLLRDNORM))
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
selrecord(td, &dev->ipmi_select);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_UNLOCK(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (revents);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static void
ipmi_purge_completed_requests(struct ipmi_device *dev)
{
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_request *req;
while (!TAILQ_EMPTY(&dev->ipmi_completed_requests)) {
req = TAILQ_FIRST(&dev->ipmi_completed_requests);
TAILQ_REMOVE(&dev->ipmi_completed_requests, req, ir_link);
dev->ipmi_requests--;
ipmi_free_request(req);
}
}
static void
ipmi_dtor(void *arg)
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
{
struct ipmi_request *req, *nreq;
struct ipmi_device *dev;
struct ipmi_softc *sc;
dev = arg;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
sc = dev->ipmi_softc;
IPMI_LOCK(sc);
if (dev->ipmi_requests) {
/* Throw away any pending requests for this device. */
TAILQ_FOREACH_SAFE(req, &sc->ipmi_pending_requests, ir_link,
nreq) {
if (req->ir_owner == dev) {
TAILQ_REMOVE(&sc->ipmi_pending_requests, req,
ir_link);
dev->ipmi_requests--;
ipmi_free_request(req);
}
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Throw away any pending completed requests for this device. */
ipmi_purge_completed_requests(dev);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/*
* If we still have outstanding requests, they must be stuck
* in an interface driver, so wait for those to drain.
*/
dev->ipmi_closing = 1;
while (dev->ipmi_requests > 0) {
msleep(&dev->ipmi_requests, &sc->ipmi_lock, PWAIT,
"ipmidrain", 0);
ipmi_purge_completed_requests(dev);
}
}
sc->ipmi_opened--;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_UNLOCK(sc);
/* Cleanup. */
free(dev, M_IPMI);
}
#ifdef IPMB
static int
ipmi_ipmb_checksum(u_char *data, int len)
{
u_char sum = 0;
for (; len; len--) {
sum += *data++;
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (-sum);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* XXX: Needs work */
static int
ipmi_ipmb_send_message(device_t dev, u_char channel, u_char netfn,
u_char command, u_char seq, u_char *data, int data_len)
{
struct ipmi_softc *sc = device_get_softc(dev);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_request *req;
u_char slave_addr = 0x52;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
int error;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_SEND_MSG, data_len + 8, 0);
req->ir_request[0] = channel;
req->ir_request[1] = slave_addr;
req->ir_request[2] = IPMI_ADDR(netfn, 0);
req->ir_request[3] = ipmi_ipmb_checksum(&req->ir_request[1], 2);
req->ir_request[4] = sc->ipmi_address;
req->ir_request[5] = IPMI_ADDR(seq, sc->ipmi_lun);
req->ir_request[6] = command;
bcopy(data, &req->ir_request[7], data_len);
temp[data_len + 7] = ipmi_ipmb_checksum(&req->ir_request[4],
data_len + 3);
ipmi_submit_driver_request(sc, req);
error = req->ir_error;
ipmi_free_request(req);
return (error);
}
static int
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_handle_attn(struct ipmi_softc *sc)
{
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_request *req;
int error;
device_printf(sc->ipmi_dev, "BMC has a message\n");
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_GET_MSG_FLAGS, 0, 1);
ipmi_submit_driver_request(sc, req);
if (req->ir_error == 0 && req->ir_compcode == 0) {
if (req->ir_reply[0] & IPMI_MSG_BUFFER_FULL) {
device_printf(sc->ipmi_dev, "message buffer full");
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (req->ir_reply[0] & IPMI_WDT_PRE_TIMEOUT) {
device_printf(sc->ipmi_dev,
"watchdog about to go off");
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (req->ir_reply[0] & IPMI_MSG_AVAILABLE) {
ipmi_free_request(req);
req = ipmi_alloc_driver_request(
IPMI_ADDR(IPMI_APP_REQUEST, 0), IPMI_GET_MSG, 0,
16);
device_printf(sc->ipmi_dev, "throw out message ");
dump_buf(temp, 16);
}
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
error = req->ir_error;
ipmi_free_request(req);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (error);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#ifdef IPMICTL_SEND_COMMAND_32
#define PTRIN(p) ((void *)(uintptr_t)(p))
#define PTROUT(p) ((uintptr_t)(p))
#endif
static int
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_ioctl(struct cdev *cdev, u_long cmd, caddr_t data,
int flags, struct thread *td)
{
struct ipmi_softc *sc;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_device *dev;
struct ipmi_request *kreq;
struct ipmi_req *req = (struct ipmi_req *)data;
struct ipmi_recv *recv = (struct ipmi_recv *)data;
struct ipmi_addr addr;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#ifdef IPMICTL_SEND_COMMAND_32
struct ipmi_req32 *req32 = (struct ipmi_req32 *)data;
struct ipmi_recv32 *recv32 = (struct ipmi_recv32 *)data;
union {
struct ipmi_req req;
struct ipmi_recv recv;
} thunk32;
#endif
int error, len;
error = devfs_get_cdevpriv((void **)&dev);
if (error)
return (error);
sc = cdev->si_drv1;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#ifdef IPMICTL_SEND_COMMAND_32
/* Convert 32-bit structures to native. */
switch (cmd) {
case IPMICTL_SEND_COMMAND_32:
req = &thunk32.req;
req->addr = PTRIN(req32->addr);
req->addr_len = req32->addr_len;
req->msgid = req32->msgid;
req->msg.netfn = req32->msg.netfn;
req->msg.cmd = req32->msg.cmd;
req->msg.data_len = req32->msg.data_len;
req->msg.data = PTRIN(req32->msg.data);
break;
case IPMICTL_RECEIVE_MSG_TRUNC_32:
case IPMICTL_RECEIVE_MSG_32:
recv = &thunk32.recv;
recv->addr = PTRIN(recv32->addr);
recv->addr_len = recv32->addr_len;
recv->msg.data_len = recv32->msg.data_len;
recv->msg.data = PTRIN(recv32->msg.data);
break;
}
#endif
switch (cmd) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#ifdef IPMICTL_SEND_COMMAND_32
case IPMICTL_SEND_COMMAND_32:
#endif
case IPMICTL_SEND_COMMAND:
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/*
* XXX: Need to add proper handling of this.
*/
error = copyin(req->addr, &addr, sizeof(addr));
if (error)
return (error);
IPMI_LOCK(sc);
/* clear out old stuff in queue of stuff done */
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* XXX: This seems odd. */
while ((kreq = TAILQ_FIRST(&dev->ipmi_completed_requests))) {
TAILQ_REMOVE(&dev->ipmi_completed_requests, kreq,
ir_link);
dev->ipmi_requests--;
ipmi_free_request(kreq);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_UNLOCK(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
kreq = ipmi_alloc_request(dev, req->msgid,
IPMI_ADDR(req->msg.netfn, 0), req->msg.cmd,
req->msg.data_len, IPMI_MAX_RX);
error = copyin(req->msg.data, kreq->ir_request,
req->msg.data_len);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (error) {
ipmi_free_request(kreq);
return (error);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK(sc);
dev->ipmi_requests++;
error = sc->ipmi_enqueue_request(sc, kreq);
IPMI_UNLOCK(sc);
if (error)
return (error);
break;
#ifdef IPMICTL_SEND_COMMAND_32
case IPMICTL_RECEIVE_MSG_TRUNC_32:
case IPMICTL_RECEIVE_MSG_32:
#endif
case IPMICTL_RECEIVE_MSG_TRUNC:
case IPMICTL_RECEIVE_MSG:
error = copyin(recv->addr, &addr, sizeof(addr));
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (error)
return (error);
IPMI_LOCK(sc);
kreq = TAILQ_FIRST(&dev->ipmi_completed_requests);
if (kreq == NULL) {
IPMI_UNLOCK(sc);
return (EAGAIN);
}
addr.channel = IPMI_BMC_CHANNEL;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* XXX */
recv->recv_type = IPMI_RESPONSE_RECV_TYPE;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
recv->msgid = kreq->ir_msgid;
recv->msg.netfn = IPMI_REPLY_ADDR(kreq->ir_addr) >> 2;
recv->msg.cmd = kreq->ir_command;
error = kreq->ir_error;
if (error) {
TAILQ_REMOVE(&dev->ipmi_completed_requests, kreq,
ir_link);
dev->ipmi_requests--;
IPMI_UNLOCK(sc);
ipmi_free_request(kreq);
return (error);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
len = kreq->ir_replylen + 1;
if (recv->msg.data_len < len &&
(cmd == IPMICTL_RECEIVE_MSG
#ifdef IPMICTL_RECEIVE_MSG_32
|| cmd == IPMICTL_RECEIVE_MSG_32
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#endif
)) {
IPMI_UNLOCK(sc);
return (EMSGSIZE);
}
TAILQ_REMOVE(&dev->ipmi_completed_requests, kreq, ir_link);
dev->ipmi_requests--;
IPMI_UNLOCK(sc);
len = min(recv->msg.data_len, len);
recv->msg.data_len = len;
error = copyout(&addr, recv->addr,sizeof(addr));
if (error == 0)
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
error = copyout(&kreq->ir_compcode, recv->msg.data, 1);
if (error == 0)
error = copyout(kreq->ir_reply, recv->msg.data + 1,
len - 1);
ipmi_free_request(kreq);
if (error)
return (error);
break;
case IPMICTL_SET_MY_ADDRESS_CMD:
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK(sc);
dev->ipmi_address = *(int*)data;
IPMI_UNLOCK(sc);
break;
case IPMICTL_GET_MY_ADDRESS_CMD:
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK(sc);
*(int*)data = dev->ipmi_address;
IPMI_UNLOCK(sc);
break;
case IPMICTL_SET_MY_LUN_CMD:
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK(sc);
dev->ipmi_lun = *(int*)data & 0x3;
IPMI_UNLOCK(sc);
break;
case IPMICTL_GET_MY_LUN_CMD:
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK(sc);
*(int*)data = dev->ipmi_lun;
IPMI_UNLOCK(sc);
break;
case IPMICTL_SET_GETS_EVENTS_CMD:
/*
device_printf(sc->ipmi_dev,
"IPMICTL_SET_GETS_EVENTS_CMD NA\n");
*/
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
break;
case IPMICTL_REGISTER_FOR_CMD:
case IPMICTL_UNREGISTER_FOR_CMD:
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (EOPNOTSUPP);
default:
device_printf(sc->ipmi_dev, "Unknown IOCTL %lX\n", cmd);
return (ENOIOCTL);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#ifdef IPMICTL_SEND_COMMAND_32
/* Update changed fields in 32-bit structures. */
switch (cmd) {
case IPMICTL_RECEIVE_MSG_TRUNC_32:
case IPMICTL_RECEIVE_MSG_32:
recv32->recv_type = recv->recv_type;
recv32->msgid = recv->msgid;
recv32->msg.netfn = recv->msg.netfn;
recv32->msg.cmd = recv->msg.cmd;
recv32->msg.data_len = recv->msg.data_len;
break;
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#endif
return (0);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/*
* Request management.
*/
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Allocate a new request with request and reply buffers. */
struct ipmi_request *
ipmi_alloc_request(struct ipmi_device *dev, long msgid, uint8_t addr,
uint8_t command, size_t requestlen, size_t replylen)
{
struct ipmi_request *req;
req = malloc(sizeof(struct ipmi_request) + requestlen + replylen,
M_IPMI, M_WAITOK | M_ZERO);
req->ir_owner = dev;
req->ir_msgid = msgid;
req->ir_addr = addr;
req->ir_command = command;
if (requestlen) {
req->ir_request = (char *)&req[1];
req->ir_requestlen = requestlen;
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (replylen) {
req->ir_reply = (char *)&req[1] + requestlen;
req->ir_replybuflen = replylen;
}
return (req);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Free a request no longer in use. */
void
ipmi_free_request(struct ipmi_request *req)
{
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
free(req, M_IPMI);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Store a processed request on the appropriate completion queue. */
void
ipmi_complete_request(struct ipmi_softc *sc, struct ipmi_request *req)
{
struct ipmi_device *dev;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK_ASSERT(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/*
* Anonymous requests (from inside the driver) always have a
* waiter that we awaken.
*/
if (req->ir_owner == NULL)
wakeup(req);
else {
dev = req->ir_owner;
TAILQ_INSERT_TAIL(&dev->ipmi_completed_requests, req, ir_link);
selwakeup(&dev->ipmi_select);
if (dev->ipmi_closing)
wakeup(&dev->ipmi_requests);
}
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Enqueue an internal driver request and wait until it is completed. */
int
ipmi_submit_driver_request(struct ipmi_softc *sc, struct ipmi_request *req,
int timo)
{
int error;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK(sc);
error = sc->ipmi_enqueue_request(sc, req);
if (error == 0)
error = msleep(req, &sc->ipmi_lock, 0, "ipmireq", timo);
if (error == 0)
error = req->ir_error;
IPMI_UNLOCK(sc);
return (error);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/*
* Helper routine for polled system interfaces that use
* ipmi_polled_enqueue_request() to queue requests. This request
* waits until there is a pending request and then returns the first
* request. If the driver is shutting down, it returns NULL.
*/
struct ipmi_request *
ipmi_dequeue_request(struct ipmi_softc *sc)
{
struct ipmi_request *req;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_LOCK_ASSERT(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
while (!sc->ipmi_detaching && TAILQ_EMPTY(&sc->ipmi_pending_requests))
cv_wait(&sc->ipmi_request_added, &sc->ipmi_lock);
if (sc->ipmi_detaching)
return (NULL);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req = TAILQ_FIRST(&sc->ipmi_pending_requests);
TAILQ_REMOVE(&sc->ipmi_pending_requests, req, ir_link);
return (req);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Default implementation of ipmi_enqueue_request() for polled interfaces. */
int
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_polled_enqueue_request(struct ipmi_softc *sc, struct ipmi_request *req)
{
IPMI_LOCK_ASSERT(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
TAILQ_INSERT_TAIL(&sc->ipmi_pending_requests, req, ir_link);
cv_signal(&sc->ipmi_request_added);
return (0);
}
/*
* Watchdog event handler.
*/
static int
ipmi_set_watchdog(struct ipmi_softc *sc, unsigned int sec)
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
{
struct ipmi_request *req;
int error;
if (sec > 0xffff / 10)
return (EINVAL);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_SET_WDOG, 6, 0);
if (sec) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req->ir_request[0] = IPMI_SET_WD_TIMER_DONT_STOP
| IPMI_SET_WD_TIMER_SMS_OS;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req->ir_request[1] = IPMI_SET_WD_ACTION_RESET;
req->ir_request[2] = 0;
req->ir_request[3] = 0; /* Timer use */
req->ir_request[4] = (sec * 10) & 0xff;
req->ir_request[5] = (sec * 10) >> 8;
} else {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req->ir_request[0] = IPMI_SET_WD_TIMER_SMS_OS;
req->ir_request[1] = 0;
req->ir_request[2] = 0;
req->ir_request[3] = 0; /* Timer use */
req->ir_request[4] = 0;
req->ir_request[5] = 0;
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
error = ipmi_submit_driver_request(sc, req, 0);
if (error)
device_printf(sc->ipmi_dev, "Failed to set watchdog\n");
else if (sec) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_free_request(req);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_RESET_WDOG, 0, 0);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
error = ipmi_submit_driver_request(sc, req, 0);
if (error)
device_printf(sc->ipmi_dev,
"Failed to reset watchdog\n");
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_free_request(req);
return (error);
/*
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
dump_watchdog(sc);
*/
}
static void
ipmi_wd_event(void *arg, unsigned int cmd, int *error)
{
struct ipmi_softc *sc = arg;
unsigned int timeout;
int e;
cmd &= WD_INTERVAL;
if (cmd > 0 && cmd <= 63) {
timeout = ((uint64_t)1 << cmd) / 1000000000;
if (timeout == 0)
timeout = 1;
e = ipmi_set_watchdog(sc, timeout);
if (e == 0)
*error = 0;
else
(void)ipmi_set_watchdog(sc, 0);
} else {
e = ipmi_set_watchdog(sc, 0);
if (e != 0 && cmd == 0)
*error = EOPNOTSUPP;
}
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
static void
ipmi_startup(void *arg)
{
struct ipmi_softc *sc = arg;
struct ipmi_request *req;
device_t dev;
int error, i;
config_intrhook_disestablish(&sc->ipmi_ich);
dev = sc->ipmi_dev;
/* Initialize interface-independent state. */
mtx_init(&sc->ipmi_lock, device_get_nameunit(dev), "ipmi", MTX_DEF);
cv_init(&sc->ipmi_request_added, "ipmireq");
TAILQ_INIT(&sc->ipmi_pending_requests);
/* Initialize interface-dependent state. */
error = sc->ipmi_startup(sc);
if (error) {
device_printf(dev, "Failed to initialize interface: %d\n",
error);
return;
}
/* Send a GET_DEVICE_ID request. */
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_GET_DEVICE_ID, 0, 15);
error = ipmi_submit_driver_request(sc, req, MAX_TIMEOUT);
if (error == EWOULDBLOCK) {
device_printf(dev, "Timed out waiting for GET_DEVICE_ID\n");
ipmi_free_request(req);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return;
} else if (error) {
device_printf(dev, "Failed GET_DEVICE_ID: %d\n", error);
ipmi_free_request(req);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return;
} else if (req->ir_compcode != 0) {
device_printf(dev,
"Bad completion code for GET_DEVICE_ID: %d\n",
req->ir_compcode);
ipmi_free_request(req);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return;
} else if (req->ir_replylen < 5) {
device_printf(dev, "Short reply for GET_DEVICE_ID: %d\n",
req->ir_replylen);
ipmi_free_request(req);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return;
}
device_printf(dev, "IPMI device rev. %d, firmware rev. %d.%d, "
"version %d.%d\n",
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req->ir_reply[1] & 0x0f,
req->ir_reply[2] & 0x0f, req->ir_reply[4],
req->ir_reply[4] & 0x0f, req->ir_reply[4] >> 4);
ipmi_free_request(req);
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_CLEAR_FLAGS, 1, 0);
ipmi_submit_driver_request(sc, req, 0);
/* XXX: Magic numbers */
if (req->ir_compcode == 0xc0) {
device_printf(dev, "Clear flags is busy\n");
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (req->ir_compcode == 0xc1) {
device_printf(dev, "Clear flags illegal\n");
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_free_request(req);
for (i = 0; i < 8; i++) {
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_GET_CHANNEL_INFO, 1, 0);
req->ir_request[0] = i;
ipmi_submit_driver_request(sc, req, 0);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (req->ir_compcode != 0) {
ipmi_free_request(req);
break;
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_free_request(req);
}
device_printf(dev, "Number of channels %d\n", i);
/* probe for watchdog */
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req = ipmi_alloc_driver_request(IPMI_ADDR(IPMI_APP_REQUEST, 0),
IPMI_GET_WDOG, 0, 0);
ipmi_submit_driver_request(sc, req, 0);
if (req->ir_compcode == 0x00) {
device_printf(dev, "Attached watchdog\n");
/* register the watchdog event handler */
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
sc->ipmi_watchdog_tag = EVENTHANDLER_REGISTER(watchdog_list,
ipmi_wd_event, sc, 0);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_free_request(req);
sc->ipmi_cdev = make_dev(&ipmi_cdevsw, device_get_unit(dev),
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
UID_ROOT, GID_OPERATOR, 0660, "ipmi%d", device_get_unit(dev));
if (sc->ipmi_cdev == NULL) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
device_printf(dev, "Failed to create cdev\n");
return;
}
sc->ipmi_cdev->si_drv1 = sc;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
int
ipmi_attach(device_t dev)
{
struct ipmi_softc *sc = device_get_softc(dev);
int error;
if (sc->ipmi_irq_res != NULL && sc->ipmi_intr != NULL) {
error = bus_setup_intr(dev, sc->ipmi_irq_res, INTR_TYPE_MISC,
NULL, sc->ipmi_intr, sc, &sc->ipmi_irq);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (error) {
device_printf(dev, "can't set up interrupt\n");
return (error);
}
}
bzero(&sc->ipmi_ich, sizeof(struct intr_config_hook));
sc->ipmi_ich.ich_func = ipmi_startup;
sc->ipmi_ich.ich_arg = sc;
if (config_intrhook_establish(&sc->ipmi_ich) != 0) {
device_printf(dev, "can't establish configuration hook\n");
return (ENOMEM);
}
ipmi_attached = 1;
return (0);
}
int
ipmi_detach(device_t dev)
{
struct ipmi_softc *sc;
sc = device_get_softc(dev);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Fail if there are any open handles. */
IPMI_LOCK(sc);
if (sc->ipmi_opened) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
IPMI_UNLOCK(sc);
return (EBUSY);
}
IPMI_UNLOCK(sc);
if (sc->ipmi_cdev)
destroy_dev(sc->ipmi_cdev);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Detach from watchdog handling and turn off watchdog. */
if (sc->ipmi_watchdog_tag) {
EVENTHANDLER_DEREGISTER(watchdog_list, sc->ipmi_watchdog_tag);
ipmi_set_watchdog(sc, 0);
}
/* XXX: should use shutdown callout I think. */
/* If the backend uses a kthread, shut it down. */
IPMI_LOCK(sc);
sc->ipmi_detaching = 1;
if (sc->ipmi_kthread) {
cv_broadcast(&sc->ipmi_request_added);
msleep(sc->ipmi_kthread, &sc->ipmi_lock, 0, "ipmi_wait", 0);
}
IPMI_UNLOCK(sc);
if (sc->ipmi_irq)
bus_teardown_intr(dev, sc->ipmi_irq_res, sc->ipmi_irq);
ipmi_release_resources(dev);
mtx_destroy(&sc->ipmi_lock);
return (0);
}
void
ipmi_release_resources(device_t dev)
{
struct ipmi_softc *sc;
int i;
sc = device_get_softc(dev);
if (sc->ipmi_irq)
bus_teardown_intr(dev, sc->ipmi_irq_res, sc->ipmi_irq);
if (sc->ipmi_irq_res)
bus_release_resource(dev, SYS_RES_IRQ, sc->ipmi_irq_rid,
sc->ipmi_irq_res);
for (i = 0; i < MAX_RES; i++)
if (sc->ipmi_io_res[i])
bus_release_resource(dev, sc->ipmi_io_type,
sc->ipmi_io_rid + i, sc->ipmi_io_res[i]);
}
devclass_t ipmi_devclass;
/* XXX: Why? */
static void
ipmi_unload(void *arg)
{
device_t * devs;
int count;
int i;
if (devclass_get_devices(ipmi_devclass, &devs, &count) != 0)
return;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
for (i = 0; i < count; i++)
device_delete_child(device_get_parent(devs[i]), devs[i]);
free(devs, M_TEMP);
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
SYSUNINIT(ipmi_unload, SI_SUB_DRIVERS, SI_ORDER_FIRST, ipmi_unload, NULL);
2006-02-13 16:50:45 +00:00
#ifdef IMPI_DEBUG
static void
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
dump_buf(u_char *data, int len)
{
char buf[20];
char line[1024];
char temp[30];
int count = 0;
int i=0;
printf("Address %p len %d\n", data, len);
if (len > 256)
len = 256;
line[0] = '\000';
for (; len > 0; len--, data++) {
sprintf(temp, "%02x ", *data);
strcat(line, temp);
if (*data >= ' ' && *data <= '~')
buf[count] = *data;
else if (*data >= 'A' && *data <= 'Z')
buf[count] = *data;
else
buf[count] = '.';
if (++count == 16) {
buf[count] = '\000';
count = 0;
printf(" %3x %s %s\n", i, line, buf);
i+=16;
line[0] = '\000';
}
}
buf[count] = '\000';
for (; count != 16; count++) {
strcat(line, " ");
}
printf(" %3x %s %s\n", i, line, buf);
}
#endif