freebsd-nq/sys/netinet/tcp_output.c

1811 lines
52 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
1994-05-24 10:09:53 +00:00
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)tcp_output.c 8.4 (Berkeley) 5/24/95
1994-05-24 10:09:53 +00:00
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
1997-09-16 18:36:06 +00:00
#include "opt_tcpdebug.h"
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/domain.h>
#include <sys/hhook.h>
#include <sys/kernel.h>
#include <sys/lock.h>
1994-05-24 10:09:53 +00:00
#include <sys/mbuf.h>
#include <sys/mutex.h>
1994-05-24 10:09:53 +00:00
#include <sys/protosw.h>
#include <sys/sdt.h>
1994-05-24 10:09:53 +00:00
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
1994-05-24 10:09:53 +00:00
#include <net/if.h>
1994-05-24 10:09:53 +00:00
#include <net/route.h>
#include <net/vnet.h>
1994-05-24 10:09:53 +00:00
#include <netinet/in.h>
#include <netinet/in_kdtrace.h>
1994-05-24 10:09:53 +00:00
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/in_pcb.h>
#include <netinet/ip_var.h>
#include <netinet/ip_options.h>
#ifdef INET6
#include <netinet6/in6_pcb.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#endif
#ifdef TCP_RFC7413
#include <netinet/tcp_fastopen.h>
#endif
#include <netinet/tcp.h>
1994-05-24 10:09:53 +00:00
#define TCPOUTFLAGS
#include <netinet/tcp_fsm.h>
#include <netinet/tcp_seq.h>
#include <netinet/tcp_timer.h>
#include <netinet/tcp_var.h>
#include <netinet/tcpip.h>
#include <netinet/cc/cc.h>
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
#ifdef TCPPCAP
#include <netinet/tcp_pcap.h>
#endif
#ifdef TCPDEBUG
1994-05-24 10:09:53 +00:00
#include <netinet/tcp_debug.h>
#endif
#ifdef TCP_OFFLOAD
#include <netinet/tcp_offload.h>
#endif
1994-05-24 10:09:53 +00:00
#ifdef IPSEC
#include <netipsec/ipsec.h>
#endif /*IPSEC*/
#include <machine/in_cksum.h>
#include <security/mac/mac_framework.h>
VNET_DEFINE(int, path_mtu_discovery) = 1;
SYSCTL_INT(_net_inet_tcp, OID_AUTO, path_mtu_discovery, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(path_mtu_discovery), 1,
"Enable Path MTU Discovery");
VNET_DEFINE(int, tcp_do_tso) = 1;
#define V_tcp_do_tso VNET(tcp_do_tso)
SYSCTL_INT(_net_inet_tcp, OID_AUTO, tso, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_do_tso), 0,
"Enable TCP Segmentation Offload");
VNET_DEFINE(int, tcp_sendspace) = 1024*32;
#define V_tcp_sendspace VNET(tcp_sendspace)
SYSCTL_INT(_net_inet_tcp, TCPCTL_SENDSPACE, sendspace, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(tcp_sendspace), 0, "Initial send socket buffer size");
VNET_DEFINE(int, tcp_do_autosndbuf) = 1;
#define V_tcp_do_autosndbuf VNET(tcp_do_autosndbuf)
SYSCTL_INT(_net_inet_tcp, OID_AUTO, sendbuf_auto, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_do_autosndbuf), 0,
"Enable automatic send buffer sizing");
VNET_DEFINE(int, tcp_autosndbuf_inc) = 8*1024;
#define V_tcp_autosndbuf_inc VNET(tcp_autosndbuf_inc)
SYSCTL_INT(_net_inet_tcp, OID_AUTO, sendbuf_inc, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_autosndbuf_inc), 0,
"Incrementor step size of automatic send buffer");
VNET_DEFINE(int, tcp_autosndbuf_max) = 2*1024*1024;
#define V_tcp_autosndbuf_max VNET(tcp_autosndbuf_max)
SYSCTL_INT(_net_inet_tcp, OID_AUTO, sendbuf_max, CTLFLAG_VNET | CTLFLAG_RW,
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
&VNET_NAME(tcp_autosndbuf_max), 0,
"Max size of automatic send buffer");
static void inline hhook_run_tcp_est_out(struct tcpcb *tp,
struct tcphdr *th, struct tcpopt *to,
long len, int tso);
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
static void inline cc_after_idle(struct tcpcb *tp);
/*
2012-11-07 07:00:59 +00:00
* Wrapper for the TCP established output helper hook.
*/
static void inline
hhook_run_tcp_est_out(struct tcpcb *tp, struct tcphdr *th,
struct tcpopt *to, long len, int tso)
{
struct tcp_hhook_data hhook_data;
if (V_tcp_hhh[HHOOK_TCP_EST_OUT]->hhh_nhooks > 0) {
hhook_data.tp = tp;
hhook_data.th = th;
hhook_data.to = to;
hhook_data.len = len;
hhook_data.tso = tso;
hhook_run_hooks(V_tcp_hhh[HHOOK_TCP_EST_OUT], &hhook_data,
tp->osd);
}
}
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
/*
* CC wrapper hook functions
*/
static void inline
cc_after_idle(struct tcpcb *tp)
{
INP_WLOCK_ASSERT(tp->t_inpcb);
if (CC_ALGO(tp)->after_idle != NULL)
CC_ALGO(tp)->after_idle(tp->ccv);
}
1994-05-24 10:09:53 +00:00
/*
* Tcp output routine: figure out what should be sent and send it.
*/
int
tcp_output(struct tcpcb *tp)
1994-05-24 10:09:53 +00:00
{
struct socket *so = tp->t_inpcb->inp_socket;
long len, recwin, sendwin;
int off, flags, error = 0; /* Keep compiler happy */
struct mbuf *m;
struct ip *ip = NULL;
struct ipovly *ipov = NULL;
struct tcphdr *th;
u_char opt[TCP_MAXOLEN];
unsigned ipoptlen, optlen, hdrlen;
#ifdef IPSEC
unsigned ipsec_optlen = 0;
#endif
1994-05-24 10:09:53 +00:00
int idle, sendalot;
int sack_rxmit, sack_bytes_rxmt;
struct sackhole *p;
int tso, mtu;
struct tcpopt to;
#if 0
int maxburst = TCP_MAXBURST;
#endif
#ifdef INET6
struct ip6_hdr *ip6 = NULL;
int isipv6;
isipv6 = (tp->t_inpcb->inp_vflag & INP_IPV6) != 0;
#endif
1994-05-24 10:09:53 +00:00
INP_WLOCK_ASSERT(tp->t_inpcb);
#ifdef TCP_OFFLOAD
if (tp->t_flags & TF_TOE)
return (tcp_offload_output(tp));
#endif
#ifdef TCP_RFC7413
/*
* For TFO connections in SYN_RECEIVED, only allow the initial
* SYN|ACK and those sent by the retransmit timer.
*/
if ((tp->t_flags & TF_FASTOPEN) &&
(tp->t_state == TCPS_SYN_RECEIVED) &&
SEQ_GT(tp->snd_max, tp->snd_una) && /* inital SYN|ACK sent */
(tp->snd_nxt != tp->snd_una)) /* not a retransmit */
return (0);
#endif
1994-05-24 10:09:53 +00:00
/*
* Determine length of data that should be transmitted,
* and flags that will be used.
* If there is some data or critical controls (SYN, RST)
* to send, then transmit; otherwise, investigate further.
*/
idle = (tp->t_flags & TF_LASTIDLE) || (tp->snd_max == tp->snd_una);
if (idle && ticks - tp->t_rcvtime >= tp->t_rxtcur)
cc_after_idle(tp);
tp->t_flags &= ~TF_LASTIDLE;
if (idle) {
if (tp->t_flags & TF_MORETOCOME) {
tp->t_flags |= TF_LASTIDLE;
idle = 0;
}
}
1994-05-24 10:09:53 +00:00
again:
/*
* If we've recently taken a timeout, snd_max will be greater than
* snd_nxt. There may be SACK information that allows us to avoid
* resending already delivered data. Adjust snd_nxt accordingly.
*/
if ((tp->t_flags & TF_SACK_PERMIT) &&
SEQ_LT(tp->snd_nxt, tp->snd_max))
tcp_sack_adjust(tp);
1994-05-24 10:09:53 +00:00
sendalot = 0;
tso = 0;
mtu = 0;
1994-05-24 10:09:53 +00:00
off = tp->snd_nxt - tp->snd_una;
sendwin = min(tp->snd_wnd, tp->snd_cwnd);
1994-05-24 10:09:53 +00:00
flags = tcp_outflags[tp->t_state];
/*
* Send any SACK-generated retransmissions. If we're explicitly trying
* to send out new data (when sendalot is 1), bypass this function.
* If we retransmit in fast recovery mode, decrement snd_cwnd, since
* we're replacing a (future) new transmission with a retransmission
* now, and we previously incremented snd_cwnd in tcp_input().
*/
/*
* Still in sack recovery , reset rxmit flag to zero.
*/
sack_rxmit = 0;
sack_bytes_rxmt = 0;
len = 0;
p = NULL;
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
if ((tp->t_flags & TF_SACK_PERMIT) && IN_FASTRECOVERY(tp->t_flags) &&
(p = tcp_sack_output(tp, &sack_bytes_rxmt))) {
long cwin;
cwin = min(tp->snd_wnd, tp->snd_cwnd) - sack_bytes_rxmt;
if (cwin < 0)
cwin = 0;
/* Do not retransmit SACK segments beyond snd_recover */
if (SEQ_GT(p->end, tp->snd_recover)) {
/*
* (At least) part of sack hole extends beyond
* snd_recover. Check to see if we can rexmit data
* for this hole.
*/
if (SEQ_GEQ(p->rxmit, tp->snd_recover)) {
/*
* Can't rexmit any more data for this hole.
* That data will be rexmitted in the next
* sack recovery episode, when snd_recover
* moves past p->rxmit.
*/
p = NULL;
goto after_sack_rexmit;
} else
/* Can rexmit part of the current hole */
len = ((long)ulmin(cwin,
tp->snd_recover - p->rxmit));
} else
len = ((long)ulmin(cwin, p->end - p->rxmit));
off = p->rxmit - tp->snd_una;
KASSERT(off >= 0,("%s: sack block to the left of una : %d",
__func__, off));
if (len > 0) {
sack_rxmit = 1;
sendalot = 1;
TCPSTAT_INC(tcps_sack_rexmits);
TCPSTAT_ADD(tcps_sack_rexmit_bytes,
min(len, tp->t_maxseg));
}
}
after_sack_rexmit:
/*
* Get standard flags, and add SYN or FIN if requested by 'hidden'
* state flags.
*/
if (tp->t_flags & TF_NEEDFIN)
flags |= TH_FIN;
if (tp->t_flags & TF_NEEDSYN)
flags |= TH_SYN;
SOCKBUF_LOCK(&so->so_snd);
1994-05-24 10:09:53 +00:00
/*
* If in persist timeout with window of 0, send 1 byte.
* Otherwise, if window is small but nonzero
* and timer expired, we will send what we can
* and go to transmit state.
*/
if (tp->t_flags & TF_FORCEDATA) {
if (sendwin == 0) {
1994-05-24 10:09:53 +00:00
/*
* If we still have some data to send, then
* clear the FIN bit. Usually this would
* happen below when it realizes that we
* aren't sending all the data. However,
* if we have exactly 1 byte of unsent data,
1994-05-24 10:09:53 +00:00
* then it won't clear the FIN bit below,
* and if we are in persist state, we wind
* up sending the packet without recording
* that we sent the FIN bit.
*
* We can't just blindly clear the FIN bit,
* because if we don't have any more data
* to send then the probe will be the FIN
* itself.
*/
if (off < sbused(&so->so_snd))
1994-05-24 10:09:53 +00:00
flags &= ~TH_FIN;
sendwin = 1;
1994-05-24 10:09:53 +00:00
} else {
tcp_timer_activate(tp, TT_PERSIST, 0);
1994-05-24 10:09:53 +00:00
tp->t_rxtshift = 0;
}
}
/*
* If snd_nxt == snd_max and we have transmitted a FIN, the
* offset will be > 0 even if so_snd.sb_cc is 0, resulting in
* a negative length. This can also occur when TCP opens up
* its congestion window while receiving additional duplicate
* acks after fast-retransmit because TCP will reset snd_nxt
* to snd_max after the fast-retransmit.
*
* In the normal retransmit-FIN-only case, however, snd_nxt will
* be set to snd_una, the offset will be 0, and the length may
* wind up 0.
*
* If sack_rxmit is true we are retransmitting from the scoreboard
* in which case len is already set.
*/
if (sack_rxmit == 0) {
if (sack_bytes_rxmt == 0)
len = ((long)ulmin(sbavail(&so->so_snd), sendwin) -
off);
else {
long cwin;
/*
* We are inside of a SACK recovery episode and are
* sending new data, having retransmitted all the
* data possible in the scoreboard.
*/
len = ((long)ulmin(sbavail(&so->so_snd), tp->snd_wnd) -
off);
/*
* Don't remove this (len > 0) check !
* We explicitly check for len > 0 here (although it
* isn't really necessary), to work around a gcc
* optimization issue - to force gcc to compute
* len above. Without this check, the computation
* of len is bungled by the optimizer.
*/
if (len > 0) {
cwin = tp->snd_cwnd -
(tp->snd_nxt - tp->sack_newdata) -
sack_bytes_rxmt;
if (cwin < 0)
cwin = 0;
len = lmin(len, cwin);
}
}
}
/*
* Lop off SYN bit if it has already been sent. However, if this
* is SYN-SENT state and if segment contains data and if we don't
* know that foreign host supports TAO, suppress sending segment.
*/
if ((flags & TH_SYN) && SEQ_GT(tp->snd_nxt, tp->snd_una)) {
if (tp->t_state != TCPS_SYN_RECEIVED)
flags &= ~TH_SYN;
#ifdef TCP_RFC7413
/*
* When sending additional segments following a TFO SYN|ACK,
* do not include the SYN bit.
*/
if ((tp->t_flags & TF_FASTOPEN) &&
(tp->t_state == TCPS_SYN_RECEIVED))
flags &= ~TH_SYN;
#endif
off--, len++;
}
/*
* Be careful not to send data and/or FIN on SYN segments.
* This measure is needed to prevent interoperability problems
* with not fully conformant TCP implementations.
*/
if ((flags & TH_SYN) && (tp->t_flags & TF_NOOPT)) {
len = 0;
flags &= ~TH_FIN;
}
#ifdef TCP_RFC7413
/*
* When retransmitting SYN|ACK on a passively-created TFO socket,
* don't include data, as the presence of data may have caused the
* original SYN|ACK to have been dropped by a middlebox.
*/
if ((tp->t_flags & TF_FASTOPEN) &&
(((tp->t_state == TCPS_SYN_RECEIVED) && (tp->t_rxtshift > 0)) ||
(flags & TH_RST)))
len = 0;
#endif
if (len <= 0) {
1994-05-24 10:09:53 +00:00
/*
* If FIN has been sent but not acked,
* but we haven't been called to retransmit,
* len will be < 0. Otherwise, window shrank
1994-05-24 10:09:53 +00:00
* after we sent into it. If window shrank to 0,
* cancel pending retransmit, pull snd_nxt back
* to (closed) window, and set the persist timer
* if it isn't already going. If the window didn't
* close completely, just wait for an ACK.
*
* We also do a general check here to ensure that
* we will set the persist timer when we have data
* to send, but a 0-byte window. This makes sure
* the persist timer is set even if the packet
* hits one of the "goto send" lines below.
1994-05-24 10:09:53 +00:00
*/
len = 0;
if ((sendwin == 0) && (TCPS_HAVEESTABLISHED(tp->t_state)) &&
(off < (int) sbavail(&so->so_snd))) {
tcp_timer_activate(tp, TT_REXMT, 0);
tp->t_rxtshift = 0;
1994-05-24 10:09:53 +00:00
tp->snd_nxt = tp->snd_una;
if (!tcp_timer_active(tp, TT_PERSIST))
tcp_setpersist(tp);
1994-05-24 10:09:53 +00:00
}
}
/* len will be >= 0 after this point. */
KASSERT(len >= 0, ("[%s:%d]: len < 0", __func__, __LINE__));
/*
* Automatic sizing of send socket buffer. Often the send buffer
* size is not optimally adjusted to the actual network conditions
* at hand (delay bandwidth product). Setting the buffer size too
* small limits throughput on links with high bandwidth and high
* delay (eg. trans-continental/oceanic links). Setting the
* buffer size too big consumes too much real kernel memory,
* especially with many connections on busy servers.
*
* The criteria to step up the send buffer one notch are:
* 1. receive window of remote host is larger than send buffer
* (with a fudge factor of 5/4th);
* 2. send buffer is filled to 7/8th with data (so we actually
* have data to make use of it);
* 3. send buffer fill has not hit maximal automatic size;
* 4. our send window (slow start and cogestion controlled) is
* larger than sent but unacknowledged data in send buffer.
*
* The remote host receive window scaling factor may limit the
* growing of the send buffer before it reaches its allowed
* maximum.
*
* It scales directly with slow start or congestion window
* and does at most one step per received ACK. This fast
* scaling has the drawback of growing the send buffer beyond
* what is strictly necessary to make full use of a given
* delay*bandwith product. However testing has shown this not
* to be much of an problem. At worst we are trading wasting
* of available bandwith (the non-use of it) for wasting some
* socket buffer memory.
*
* TODO: Shrink send buffer during idle periods together
* with congestion window. Requires another timer. Has to
* wait for upcoming tcp timer rewrite.
*
* XXXGL: should there be used sbused() or sbavail()?
*/
if (V_tcp_do_autosndbuf && so->so_snd.sb_flags & SB_AUTOSIZE) {
if ((tp->snd_wnd / 4 * 5) >= so->so_snd.sb_hiwat &&
sbused(&so->so_snd) >= (so->so_snd.sb_hiwat / 8 * 7) &&
sbused(&so->so_snd) < V_tcp_autosndbuf_max &&
sendwin >= (sbused(&so->so_snd) -
(tp->snd_nxt - tp->snd_una))) {
if (!sbreserve_locked(&so->so_snd,
min(so->so_snd.sb_hiwat + V_tcp_autosndbuf_inc,
V_tcp_autosndbuf_max), so, curthread))
so->so_snd.sb_flags &= ~SB_AUTOSIZE;
}
}
/*
* Decide if we can use TCP Segmentation Offloading (if supported by
* hardware).
*
* TSO may only be used if we are in a pure bulk sending state. The
* presence of TCP-MD5, SACK retransmits, SACK advertizements and
* IP options prevent using TSO. With TSO the TCP header is the same
* (except for the sequence number) for all generated packets. This
* makes it impossible to transmit any options which vary per generated
* segment or packet.
*/
#ifdef IPSEC
/*
* Pre-calculate here as we save another lookup into the darknesses
* of IPsec that way and can actually decide if TSO is ok.
*/
ipsec_optlen = ipsec_hdrsiz_tcp(tp);
#endif
if ((tp->t_flags & TF_TSO) && V_tcp_do_tso && len > tp->t_maxseg &&
((tp->t_flags & TF_SIGNATURE) == 0) &&
tp->rcv_numsacks == 0 && sack_rxmit == 0 &&
#ifdef IPSEC
ipsec_optlen == 0 &&
#endif
tp->t_inpcb->inp_options == NULL &&
tp->t_inpcb->in6p_options == NULL)
tso = 1;
if (sack_rxmit) {
if (SEQ_LT(p->rxmit + len, tp->snd_una + sbused(&so->so_snd)))
flags &= ~TH_FIN;
} else {
if (SEQ_LT(tp->snd_nxt + len, tp->snd_una +
sbused(&so->so_snd)))
flags &= ~TH_FIN;
}
1994-05-24 10:09:53 +00:00
recwin = sbspace(&so->so_rcv);
1994-05-24 10:09:53 +00:00
/*
* Sender silly window avoidance. We transmit under the following
* conditions when len is non-zero:
*
* - We have a full segment (or more with TSO)
2001-12-13 04:02:31 +00:00
* - This is the last buffer in a write()/send() and we are
* either idle or running NODELAY
* - we've timed out (e.g. persist timer)
* - we have more then 1/2 the maximum send window's worth of
* data (receiver may be limited the window size)
* - we need to retransmit
1994-05-24 10:09:53 +00:00
*/
if (len) {
if (len >= tp->t_maxseg)
1994-05-24 10:09:53 +00:00
goto send;
/*
* NOTE! on localhost connections an 'ack' from the remote
* end may occur synchronously with the output and cause
* us to flush a buffer queued with moretocome. XXX
*
* note: the len + off check is almost certainly unnecessary.
*/
2001-12-13 04:02:31 +00:00
if (!(tp->t_flags & TF_MORETOCOME) && /* normal case */
(idle || (tp->t_flags & TF_NODELAY)) &&
len + off >= sbavail(&so->so_snd) &&
(tp->t_flags & TF_NOPUSH) == 0) {
1994-05-24 10:09:53 +00:00
goto send;
}
if (tp->t_flags & TF_FORCEDATA) /* typ. timeout case */
1994-05-24 10:09:53 +00:00
goto send;
if (len >= tp->max_sndwnd / 2 && tp->max_sndwnd > 0)
1994-05-24 10:09:53 +00:00
goto send;
if (SEQ_LT(tp->snd_nxt, tp->snd_max)) /* retransmit case */
1994-05-24 10:09:53 +00:00
goto send;
if (sack_rxmit)
goto send;
1994-05-24 10:09:53 +00:00
}
/*
* Sending of standalone window updates.
*
* Window updates are important when we close our window due to a
* full socket buffer and are opening it again after the application
* reads data from it. Once the window has opened again and the
* remote end starts to send again the ACK clock takes over and
* provides the most current window information.
*
* We must avoid the silly window syndrome whereas every read
* from the receive buffer, no matter how small, causes a window
* update to be sent. We also should avoid sending a flurry of
* window updates when the socket buffer had queued a lot of data
* and the application is doing small reads.
*
* Prevent a flurry of pointless window updates by only sending
* an update when we can increase the advertized window by more
* than 1/4th of the socket buffer capacity. When the buffer is
* getting full or is very small be more aggressive and send an
* update whenever we can increase by two mss sized segments.
* In all other situations the ACK's to new incoming data will
* carry further window increases.
*
* Don't send an independent window update if a delayed
* ACK is pending (it will get piggy-backed on it) or the
* remote side already has done a half-close and won't send
* more data. Skip this if the connection is in T/TCP
* half-open state.
1994-05-24 10:09:53 +00:00
*/
if (recwin > 0 && !(tp->t_flags & TF_NEEDSYN) &&
!(tp->t_flags & TF_DELACK) &&
!TCPS_HAVERCVDFIN(tp->t_state)) {
1995-05-30 08:16:23 +00:00
/*
* "adv" is the amount we could increase the window,
1994-05-24 10:09:53 +00:00
* taking into account that we are limited by
* TCP_MAXWIN << tp->rcv_scale.
*/
long adv;
int oldwin;
adv = min(recwin, (long)TCP_MAXWIN << tp->rcv_scale);
if (SEQ_GT(tp->rcv_adv, tp->rcv_nxt)) {
oldwin = (tp->rcv_adv - tp->rcv_nxt);
adv -= oldwin;
} else
oldwin = 0;
1994-05-24 10:09:53 +00:00
/*
* If the new window size ends up being the same as the old
* size when it is scaled, then don't force a window update.
*/
if (oldwin >> tp->rcv_scale == (adv + oldwin) >> tp->rcv_scale)
goto dontupdate;
if (adv >= (long)(2 * tp->t_maxseg) &&
(adv >= (long)(so->so_rcv.sb_hiwat / 4) ||
recwin <= (long)(so->so_rcv.sb_hiwat / 8) ||
so->so_rcv.sb_hiwat <= 8 * tp->t_maxseg))
1994-05-24 10:09:53 +00:00
goto send;
}
dontupdate:
1994-05-24 10:09:53 +00:00
/*
* Send if we owe the peer an ACK, RST, SYN, or urgent data. ACKNOW
* is also a catch-all for the retransmit timer timeout case.
1994-05-24 10:09:53 +00:00
*/
if (tp->t_flags & TF_ACKNOW)
goto send;
if ((flags & TH_RST) ||
((flags & TH_SYN) && (tp->t_flags & TF_NEEDSYN) == 0))
1994-05-24 10:09:53 +00:00
goto send;
if (SEQ_GT(tp->snd_up, tp->snd_una))
goto send;
/*
* If our state indicates that FIN should be sent
* and we have not yet done so, then we need to send.
1994-05-24 10:09:53 +00:00
*/
if (flags & TH_FIN &&
((tp->t_flags & TF_SENTFIN) == 0 || tp->snd_nxt == tp->snd_una))
goto send;
/*
* In SACK, it is possible for tcp_output to fail to send a segment
* after the retransmission timer has been turned off. Make sure
* that the retransmission timer is set.
*/
if ((tp->t_flags & TF_SACK_PERMIT) &&
SEQ_GT(tp->snd_max, tp->snd_una) &&
!tcp_timer_active(tp, TT_REXMT) &&
!tcp_timer_active(tp, TT_PERSIST)) {
tcp_timer_activate(tp, TT_REXMT, tp->t_rxtcur);
goto just_return;
}
1994-05-24 10:09:53 +00:00
/*
* TCP window updates are not reliable, rather a polling protocol
* using ``persist'' packets is used to insure receipt of window
* updates. The three ``states'' for the output side are:
* idle not doing retransmits or persists
* persisting to move a small or zero window
* (re)transmitting and thereby not persisting
*
* tcp_timer_active(tp, TT_PERSIST)
* is true when we are in persist state.
* (tp->t_flags & TF_FORCEDATA)
1994-05-24 10:09:53 +00:00
* is set when we are called to send a persist packet.
* tcp_timer_active(tp, TT_REXMT)
1994-05-24 10:09:53 +00:00
* is set when we are retransmitting
* The output side is idle when both timers are zero.
*
* If send window is too small, there is data to transmit, and no
* retransmit or persist is pending, then go to persist state.
* If nothing happens soon, send when timer expires:
* if window is nonzero, transmit what we can,
* otherwise force out a byte.
*/
if (sbavail(&so->so_snd) && !tcp_timer_active(tp, TT_REXMT) &&
!tcp_timer_active(tp, TT_PERSIST)) {
1994-05-24 10:09:53 +00:00
tp->t_rxtshift = 0;
tcp_setpersist(tp);
}
/*
* No reason to send a segment, just return.
*/
just_return:
SOCKBUF_UNLOCK(&so->so_snd);
1994-05-24 10:09:53 +00:00
return (0);
send:
SOCKBUF_LOCK_ASSERT(&so->so_snd);
if (len > 0) {
if (len >= tp->t_maxseg)
tp->t_flags2 |= TF2_PLPMTU_MAXSEGSNT;
else
tp->t_flags2 &= ~TF2_PLPMTU_MAXSEGSNT;
}
1994-05-24 10:09:53 +00:00
/*
* Before ESTABLISHED, force sending of initial options
* unless TCP set not to do any options.
* NOTE: we assume that the IP/TCP header plus TCP options
* always fit in a single mbuf, leaving room for a maximum
* link header, i.e.
* max_linkhdr + sizeof (struct tcpiphdr) + optlen <= MCLBYTES
1994-05-24 10:09:53 +00:00
*/
optlen = 0;
#ifdef INET6
if (isipv6)
hdrlen = sizeof (struct ip6_hdr) + sizeof (struct tcphdr);
else
#endif
hdrlen = sizeof (struct tcpiphdr);
1995-05-30 08:16:23 +00:00
/*
* Compute options for segment.
* We only have to care about SYN and established connection
* segments. Options for SYN-ACK segments are handled in TCP
* syncache.
*/
to.to_flags = 0;
if ((tp->t_flags & TF_NOOPT) == 0) {
/* Maximum segment size. */
if (flags & TH_SYN) {
tp->snd_nxt = tp->iss;
to.to_mss = tcp_mssopt(&tp->t_inpcb->inp_inc);
to.to_flags |= TOF_MSS;
#ifdef TCP_RFC7413
/*
* Only include the TFO option on the first
* transmission of the SYN|ACK on a
* passively-created TFO socket, as the presence of
* the TFO option may have caused the original
* SYN|ACK to have been dropped by a middlebox.
*/
if ((tp->t_flags & TF_FASTOPEN) &&
(tp->t_state == TCPS_SYN_RECEIVED) &&
(tp->t_rxtshift == 0)) {
to.to_tfo_len = TCP_FASTOPEN_COOKIE_LEN;
to.to_tfo_cookie = (u_char *)&tp->t_tfo_cookie;
to.to_flags |= TOF_FASTOPEN;
}
#endif
}
/* Window scaling. */
if ((flags & TH_SYN) && (tp->t_flags & TF_REQ_SCALE)) {
to.to_wscale = tp->request_r_scale;
to.to_flags |= TOF_SCALE;
}
/* Timestamps. */
if ((tp->t_flags & TF_RCVD_TSTMP) ||
((flags & TH_SYN) && (tp->t_flags & TF_REQ_TSTMP))) {
to.to_tsval = tcp_ts_getticks() + tp->ts_offset;
to.to_tsecr = tp->ts_recent;
to.to_flags |= TOF_TS;
/* Set receive buffer autosizing timestamp. */
if (tp->rfbuf_ts == 0 &&
(so->so_rcv.sb_flags & SB_AUTOSIZE))
tp->rfbuf_ts = tcp_ts_getticks();
}
/* Selective ACK's. */
if (tp->t_flags & TF_SACK_PERMIT) {
if (flags & TH_SYN)
to.to_flags |= TOF_SACKPERM;
else if (TCPS_HAVEESTABLISHED(tp->t_state) &&
(tp->t_flags & TF_SACK_PERMIT) &&
tp->rcv_numsacks > 0) {
to.to_flags |= TOF_SACK;
to.to_nsacks = tp->rcv_numsacks;
to.to_sacks = (u_char *)tp->sackblks;
}
}
#ifdef TCP_SIGNATURE
/* TCP-MD5 (RFC2385). */
if (tp->t_flags & TF_SIGNATURE)
to.to_flags |= TOF_SIGNATURE;
#endif /* TCP_SIGNATURE */
/* Processing the options. */
hdrlen += optlen = tcp_addoptions(&to, opt);
}
#ifdef INET6
if (isipv6)
ipoptlen = ip6_optlen(tp->t_inpcb);
else
#endif
if (tp->t_inpcb->inp_options)
ipoptlen = tp->t_inpcb->inp_options->m_len -
offsetof(struct ipoption, ipopt_list);
else
ipoptlen = 0;
#ifdef IPSEC
ipoptlen += ipsec_optlen;
#endif
1994-05-24 10:09:53 +00:00
/*
* Adjust data length if insertion of options will
* bump the packet length beyond the t_maxseg length.
* Clear the FIN bit because we cut off the tail of
* the segment.
1994-05-24 10:09:53 +00:00
*/
if (len + optlen + ipoptlen > tp->t_maxseg) {
flags &= ~TH_FIN;
if (tso) {
u_int if_hw_tsomax;
u_int if_hw_tsomaxsegcount;
u_int if_hw_tsomaxsegsize;
struct mbuf *mb;
u_int moff;
int max_len;
/* extract TSO information */
if_hw_tsomax = tp->t_tsomax;
if_hw_tsomaxsegcount = tp->t_tsomaxsegcount;
if_hw_tsomaxsegsize = tp->t_tsomaxsegsize;
/*
* Limit a TSO burst to prevent it from
* overflowing or exceeding the maximum length
* allowed by the network interface:
*/
KASSERT(ipoptlen == 0,
("%s: TSO can't do IP options", __func__));
/*
* Check if we should limit by maximum payload
* length:
*/
if (if_hw_tsomax != 0) {
/* compute maximum TSO length */
Update TSO limits to include all headers. To make driver programming easier the TSO limits are changed to reflect the values used in the BUSDMA tag a network adapter driver is using. The TCP/IP network stack will subtract space for all linklevel and protocol level headers and ensure that the full mbuf chain passed to the network adapter fits within the given limits. Implementation notes: If a network adapter driver needs to fixup the first mbuf in order to support VLAN tag insertion, the size of the VLAN tag should be subtracted from the TSO limit. Else not. Network adapters which typically inline the complete header mbuf could technically transmit one more segment. This patch does not implement a mechanism to recover the last segment for data transmission. It is believed when sufficiently large mbuf clusters are used, the segment limit will not be reached and recovering the last segment will not have any effect. The current TSO algorithm tries to send MTU-sized packets, where the MTU typically is 1500 bytes, which gives 1448 bytes of TCP data payload per packet for IPv4. That means if the TSO length limitiation is set to 65536 bytes, there will be a data payload remainder of (65536 - 1500) mod 1448 bytes which is equal to 324 bytes. Trying to recover total TSO length due to inlining mbuf header data will not have any effect, because adding or removing the ETH/IP/TCP headers to or from 324 bytes will not cause more or less TCP payload to be TSO'ed. Existing network adapter limits will be updated separately. Differential Revision: https://reviews.freebsd.org/D3458 Reviewed by: rmacklem MFC after: 2 weeks
2015-09-14 08:36:22 +00:00
max_len = (if_hw_tsomax - hdrlen -
max_linkhdr);
if (max_len <= 0) {
len = 0;
} else if (len > max_len) {
sendalot = 1;
len = max_len;
}
}
/*
* Check if we should limit by maximum segment
* size and count:
*/
if (if_hw_tsomaxsegcount != 0 &&
if_hw_tsomaxsegsize != 0) {
Update TSO limits to include all headers. To make driver programming easier the TSO limits are changed to reflect the values used in the BUSDMA tag a network adapter driver is using. The TCP/IP network stack will subtract space for all linklevel and protocol level headers and ensure that the full mbuf chain passed to the network adapter fits within the given limits. Implementation notes: If a network adapter driver needs to fixup the first mbuf in order to support VLAN tag insertion, the size of the VLAN tag should be subtracted from the TSO limit. Else not. Network adapters which typically inline the complete header mbuf could technically transmit one more segment. This patch does not implement a mechanism to recover the last segment for data transmission. It is believed when sufficiently large mbuf clusters are used, the segment limit will not be reached and recovering the last segment will not have any effect. The current TSO algorithm tries to send MTU-sized packets, where the MTU typically is 1500 bytes, which gives 1448 bytes of TCP data payload per packet for IPv4. That means if the TSO length limitiation is set to 65536 bytes, there will be a data payload remainder of (65536 - 1500) mod 1448 bytes which is equal to 324 bytes. Trying to recover total TSO length due to inlining mbuf header data will not have any effect, because adding or removing the ETH/IP/TCP headers to or from 324 bytes will not cause more or less TCP payload to be TSO'ed. Existing network adapter limits will be updated separately. Differential Revision: https://reviews.freebsd.org/D3458 Reviewed by: rmacklem MFC after: 2 weeks
2015-09-14 08:36:22 +00:00
/*
* Subtract one segment for the LINK
* and TCP/IP headers mbuf that will
* be prepended to this mbuf chain
* after the code in this section
* limits the number of mbufs in the
* chain to if_hw_tsomaxsegcount.
*/
if_hw_tsomaxsegcount -= 1;
max_len = 0;
mb = sbsndmbuf(&so->so_snd, off, &moff);
while (mb != NULL && max_len < len) {
u_int mlen;
u_int frags;
/*
* Get length of mbuf fragment
* and how many hardware frags,
* rounded up, it would use:
*/
mlen = (mb->m_len - moff);
frags = howmany(mlen,
if_hw_tsomaxsegsize);
/* Handle special case: Zero Length Mbuf */
if (frags == 0)
frags = 1;
/*
* Check if the fragment limit
* will be reached or exceeded:
*/
if (frags >= if_hw_tsomaxsegcount) {
max_len += min(mlen,
if_hw_tsomaxsegcount *
if_hw_tsomaxsegsize);
break;
}
max_len += mlen;
if_hw_tsomaxsegcount -= frags;
moff = 0;
mb = mb->m_next;
}
if (max_len <= 0) {
len = 0;
} else if (len > max_len) {
sendalot = 1;
len = max_len;
}
}
/*
* Prevent the last segment from being
* fractional unless the send sockbuf can be
* emptied:
*/
max_len = (tp->t_maxseg - optlen);
if ((off + len) < sbavail(&so->so_snd)) {
moff = len % max_len;
if (moff != 0) {
len -= moff;
sendalot = 1;
}
}
/*
* In case there are too many small fragments
* don't use TSO:
*/
if (len <= max_len) {
len = max_len;
sendalot = 1;
tso = 0;
}
/*
* Send the FIN in a separate segment
* after the bulk sending is done.
* We don't trust the TSO implementations
* to clear the FIN flag on all but the
* last segment.
*/
if (tp->t_flags & TF_NEEDFIN)
sendalot = 1;
} else {
len = tp->t_maxseg - optlen - ipoptlen;
sendalot = 1;
}
} else
tso = 0;
KASSERT(len + hdrlen + ipoptlen <= IP_MAXPACKET,
("%s: len > IP_MAXPACKET", __func__));
1994-05-24 10:09:53 +00:00
/*#ifdef DIAGNOSTIC*/
#ifdef INET6
if (max_linkhdr + hdrlen > MCLBYTES)
#else
if (max_linkhdr + hdrlen > MHLEN)
#endif
panic("tcphdr too big");
/*#endif*/
1994-05-24 10:09:53 +00:00
/*
* This KASSERT is here to catch edge cases at a well defined place.
* Before, those had triggered (random) panic conditions further down.
*/
KASSERT(len >= 0, ("[%s:%d]: len < 0", __func__, __LINE__));
1994-05-24 10:09:53 +00:00
/*
* Grab a header mbuf, attaching a copy of data to
* be transmitted, and initialize the header from
* the template for sends on this connection.
*/
if (len) {
struct mbuf *mb;
u_int moff;
if ((tp->t_flags & TF_FORCEDATA) && len == 1)
TCPSTAT_INC(tcps_sndprobe);
else if (SEQ_LT(tp->snd_nxt, tp->snd_max) || sack_rxmit) {
tp->t_sndrexmitpack++;
TCPSTAT_INC(tcps_sndrexmitpack);
TCPSTAT_ADD(tcps_sndrexmitbyte, len);
1994-05-24 10:09:53 +00:00
} else {
TCPSTAT_INC(tcps_sndpack);
TCPSTAT_ADD(tcps_sndbyte, len);
1994-05-24 10:09:53 +00:00
}
#ifdef INET6
if (MHLEN < hdrlen + max_linkhdr)
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
else
#endif
m = m_gethdr(M_NOWAIT, MT_DATA);
1994-05-24 10:09:53 +00:00
if (m == NULL) {
SOCKBUF_UNLOCK(&so->so_snd);
1994-05-24 10:09:53 +00:00
error = ENOBUFS;
sack_rxmit = 0;
1994-05-24 10:09:53 +00:00
goto out;
}
1994-05-24 10:09:53 +00:00
m->m_data += max_linkhdr;
m->m_len = hdrlen;
/*
* Start the m_copy functions from the closest mbuf
* to the offset in the socket buffer chain.
*/
mb = sbsndptr(&so->so_snd, off, len, &moff);
1994-05-24 10:09:53 +00:00
if (len <= MHLEN - hdrlen - max_linkhdr) {
m_copydata(mb, moff, (int)len,
1994-05-24 10:09:53 +00:00
mtod(m, caddr_t) + hdrlen);
m->m_len += len;
} else {
m->m_next = m_copy(mb, moff, (int)len);
if (m->m_next == NULL) {
SOCKBUF_UNLOCK(&so->so_snd);
(void) m_free(m);
error = ENOBUFS;
sack_rxmit = 0;
goto out;
}
1994-05-24 10:09:53 +00:00
}
1994-05-24 10:09:53 +00:00
/*
* If we're sending everything we've got, set PUSH.
* (This will keep happy those implementations which only
* give data to the user when a buffer fills or
* a PUSH comes in.)
*/
if ((off + len == sbused(&so->so_snd)) && !(flags & TH_SYN))
1994-05-24 10:09:53 +00:00
flags |= TH_PUSH;
SOCKBUF_UNLOCK(&so->so_snd);
1994-05-24 10:09:53 +00:00
} else {
SOCKBUF_UNLOCK(&so->so_snd);
1994-05-24 10:09:53 +00:00
if (tp->t_flags & TF_ACKNOW)
TCPSTAT_INC(tcps_sndacks);
1994-05-24 10:09:53 +00:00
else if (flags & (TH_SYN|TH_FIN|TH_RST))
TCPSTAT_INC(tcps_sndctrl);
1994-05-24 10:09:53 +00:00
else if (SEQ_GT(tp->snd_up, tp->snd_una))
TCPSTAT_INC(tcps_sndurg);
1994-05-24 10:09:53 +00:00
else
TCPSTAT_INC(tcps_sndwinup);
1994-05-24 10:09:53 +00:00
m = m_gethdr(M_NOWAIT, MT_DATA);
1994-05-24 10:09:53 +00:00
if (m == NULL) {
error = ENOBUFS;
sack_rxmit = 0;
1994-05-24 10:09:53 +00:00
goto out;
}
#ifdef INET6
if (isipv6 && (MHLEN < hdrlen + max_linkhdr) &&
MHLEN >= hdrlen) {
M_ALIGN(m, hdrlen);
} else
#endif
1994-05-24 10:09:53 +00:00
m->m_data += max_linkhdr;
m->m_len = hdrlen;
}
SOCKBUF_UNLOCK_ASSERT(&so->so_snd);
1994-05-24 10:09:53 +00:00
m->m_pkthdr.rcvif = (struct ifnet *)0;
#ifdef MAC
mac_inpcb_create_mbuf(tp->t_inpcb, m);
#endif
#ifdef INET6
if (isipv6) {
ip6 = mtod(m, struct ip6_hdr *);
th = (struct tcphdr *)(ip6 + 1);
tcpip_fillheaders(tp->t_inpcb, ip6, th);
} else
#endif /* INET6 */
{
ip = mtod(m, struct ip *);
ipov = (struct ipovly *)ip;
th = (struct tcphdr *)(ip + 1);
tcpip_fillheaders(tp->t_inpcb, ip, th);
}
1994-05-24 10:09:53 +00:00
/*
* Fill in fields, remembering maximum advertised
* window for use in delaying messages about window sizes.
* If resending a FIN, be sure not to use a new sequence number.
*/
1995-05-30 08:16:23 +00:00
if (flags & TH_FIN && tp->t_flags & TF_SENTFIN &&
1994-05-24 10:09:53 +00:00
tp->snd_nxt == tp->snd_max)
tp->snd_nxt--;
/*
* If we are starting a connection, send ECN setup
* SYN packet. If we are on a retransmit, we may
* resend those bits a number of times as per
* RFC 3168.
*/
if (tp->t_state == TCPS_SYN_SENT && V_tcp_do_ecn) {
if (tp->t_rxtshift >= 1) {
if (tp->t_rxtshift <= V_tcp_ecn_maxretries)
flags |= TH_ECE|TH_CWR;
} else
flags |= TH_ECE|TH_CWR;
}
if (tp->t_state == TCPS_ESTABLISHED &&
(tp->t_flags & TF_ECN_PERMIT)) {
/*
* If the peer has ECN, mark data packets with
* ECN capable transmission (ECT).
* Ignore pure ack packets, retransmissions and window probes.
*/
if (len > 0 && SEQ_GEQ(tp->snd_nxt, tp->snd_max) &&
!((tp->t_flags & TF_FORCEDATA) && len == 1)) {
#ifdef INET6
if (isipv6)
ip6->ip6_flow |= htonl(IPTOS_ECN_ECT0 << 20);
else
#endif
ip->ip_tos |= IPTOS_ECN_ECT0;
TCPSTAT_INC(tcps_ecn_ect0);
}
/*
* Reply with proper ECN notifications.
*/
if (tp->t_flags & TF_ECN_SND_CWR) {
flags |= TH_CWR;
tp->t_flags &= ~TF_ECN_SND_CWR;
}
if (tp->t_flags & TF_ECN_SND_ECE)
flags |= TH_ECE;
}
1994-05-24 10:09:53 +00:00
/*
* If we are doing retransmissions, then snd_nxt will
* not reflect the first unsent octet. For ACK only
* packets, we do not want the sequence number of the
* retransmitted packet, we want the sequence number
* of the next unsent octet. So, if there is no data
* (and no SYN or FIN), use snd_max instead of snd_nxt
* when filling in ti_seq. But if we are in persist
* state, snd_max might reflect one byte beyond the
* right edge of the window, so use snd_nxt in that
* case, since we know we aren't doing a retransmission.
* (retransmit and persist are mutually exclusive...)
*/
if (sack_rxmit == 0) {
if (len || (flags & (TH_SYN|TH_FIN)) ||
tcp_timer_active(tp, TT_PERSIST))
th->th_seq = htonl(tp->snd_nxt);
else
th->th_seq = htonl(tp->snd_max);
} else {
th->th_seq = htonl(p->rxmit);
p->rxmit += len;
tp->sackhint.sack_bytes_rexmit += len;
}
th->th_ack = htonl(tp->rcv_nxt);
1994-05-24 10:09:53 +00:00
if (optlen) {
bcopy(opt, th + 1, optlen);
th->th_off = (sizeof (struct tcphdr) + optlen) >> 2;
1994-05-24 10:09:53 +00:00
}
th->th_flags = flags;
1994-05-24 10:09:53 +00:00
/*
* Calculate receive window. Don't shrink window,
* but avoid silly window syndrome.
*/
if (recwin < (long)(so->so_rcv.sb_hiwat / 4) &&
recwin < (long)tp->t_maxseg)
recwin = 0;
if (SEQ_GT(tp->rcv_adv, tp->rcv_nxt) &&
recwin < (long)(tp->rcv_adv - tp->rcv_nxt))
recwin = (long)(tp->rcv_adv - tp->rcv_nxt);
if (recwin > (long)TCP_MAXWIN << tp->rcv_scale)
recwin = (long)TCP_MAXWIN << tp->rcv_scale;
/*
* According to RFC1323 the window field in a SYN (i.e., a <SYN>
* or <SYN,ACK>) segment itself is never scaled. The <SYN,ACK>
* case is handled in syncache.
*/
if (flags & TH_SYN)
th->th_win = htons((u_short)
(min(sbspace(&so->so_rcv), TCP_MAXWIN)));
else
th->th_win = htons((u_short)(recwin >> tp->rcv_scale));
/*
* Adjust the RXWIN0SENT flag - indicate that we have advertised
* a 0 window. This may cause the remote transmitter to stall. This
* flag tells soreceive() to disable delayed acknowledgements when
* draining the buffer. This can occur if the receiver is attempting
2008-07-15 10:32:35 +00:00
* to read more data than can be buffered prior to transmitting on
* the connection.
*/
if (th->th_win == 0) {
tp->t_sndzerowin++;
tp->t_flags |= TF_RXWIN0SENT;
} else
tp->t_flags &= ~TF_RXWIN0SENT;
1994-05-24 10:09:53 +00:00
if (SEQ_GT(tp->snd_up, tp->snd_nxt)) {
th->th_urp = htons((u_short)(tp->snd_up - tp->snd_nxt));
th->th_flags |= TH_URG;
1994-05-24 10:09:53 +00:00
} else
/*
* If no urgent pointer to send, then we pull
* the urgent pointer to the left edge of the send window
* so that it doesn't drift into the send window on sequence
* number wraparound.
*/
tp->snd_up = tp->snd_una; /* drag it along */
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#ifdef TCP_SIGNATURE
if (to.to_flags & TOF_SIGNATURE) {
int sigoff = to.to_signature - opt;
tcp_signature_compute(m, 0, len, optlen,
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
(u_char *)(th + 1) + sigoff, IPSEC_DIR_OUTBOUND);
}
2004-02-13 18:21:45 +00:00
#endif
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
1994-05-24 10:09:53 +00:00
/*
* Put TCP length in extended header, and then
* checksum extended header and data.
*/
m->m_pkthdr.len = hdrlen + len; /* in6_cksum() need this */
m->m_pkthdr.csum_data = offsetof(struct tcphdr, th_sum);
#ifdef INET6
if (isipv6) {
/*
* ip6_plen is not need to be filled now, and will be filled
* in ip6_output.
*/
m->m_pkthdr.csum_flags = CSUM_TCP_IPV6;
th->th_sum = in6_cksum_pseudo(ip6, sizeof(struct tcphdr) +
optlen + len, IPPROTO_TCP, 0);
}
#endif
#if defined(INET6) && defined(INET)
else
#endif
#ifdef INET
{
m->m_pkthdr.csum_flags = CSUM_TCP;
th->th_sum = in_pseudo(ip->ip_src.s_addr, ip->ip_dst.s_addr,
htons(sizeof(struct tcphdr) + IPPROTO_TCP + len + optlen));
/* IP version must be set here for ipv4/ipv6 checking later */
KASSERT(ip->ip_v == IPVERSION,
("%s: IP version incorrect: %d", __func__, ip->ip_v));
}
#endif
1994-05-24 10:09:53 +00:00
/*
* Enable TSO and specify the size of the segments.
* The TCP pseudo header checksum is always provided.
*/
if (tso) {
KASSERT(len > tp->t_maxseg - optlen,
("%s: len <= tso_segsz", __func__));
m->m_pkthdr.csum_flags |= CSUM_TSO;
m->m_pkthdr.tso_segsz = tp->t_maxseg - optlen;
}
#ifdef IPSEC
KASSERT(len + hdrlen + ipoptlen - ipsec_optlen == m_length(m, NULL),
("%s: mbuf chain shorter than expected: %ld + %u + %u - %u != %u",
__func__, len, hdrlen, ipoptlen, ipsec_optlen, m_length(m, NULL)));
#else
KASSERT(len + hdrlen + ipoptlen == m_length(m, NULL),
("%s: mbuf chain shorter than expected: %ld + %u + %u != %u",
__func__, len, hdrlen, ipoptlen, m_length(m, NULL)));
#endif
/* Run HHOOK_TCP_ESTABLISHED_OUT helper hooks. */
hhook_run_tcp_est_out(tp, th, &to, len, tso);
#ifdef TCPDEBUG
1994-05-24 10:09:53 +00:00
/*
* Trace.
*/
if (so->so_options & SO_DEBUG) {
2004-06-18 09:53:58 +00:00
u_short save = 0;
#ifdef INET6
if (!isipv6)
#endif
{
save = ipov->ih_len;
ipov->ih_len = htons(m->m_pkthdr.len /* - hdrlen + (th->th_off << 2) */);
}
tcp_trace(TA_OUTPUT, tp->t_state, tp, mtod(m, void *), th, 0);
#ifdef INET6
if (!isipv6)
#endif
ipov->ih_len = save;
}
#endif /* TCPDEBUG */
TCP_PROBE3(debug__input, tp, th, mtod(m, const char *));
1994-05-24 10:09:53 +00:00
/*
* Fill in IP length and desired time to live and
* send to IP level. There should be a better way
* to handle ttl and tos; we could keep them in
* the template, but need a way to checksum without them.
*/
/*
2014-07-03 23:12:43 +00:00
* m->m_pkthdr.len should have been set before checksum calculation,
* because in6_cksum() need it.
*/
#ifdef INET6
if (isipv6) {
struct route_in6 ro;
bzero(&ro, sizeof(ro));
/*
* we separately set hoplimit for every segment, since the
* user might want to change the value via setsockopt.
* Also, desired default hop limit might be changed via
* Neighbor Discovery.
*/
ip6->ip6_hlim = in6_selecthlim(tp->t_inpcb, NULL);
/*
* Set the packet size here for the benefit of DTrace probes.
* ip6_output() will set it properly; it's supposed to include
* the option header lengths as well.
*/
ip6->ip6_plen = htons(m->m_pkthdr.len - sizeof(*ip6));
if (V_path_mtu_discovery && tp->t_maxseg > V_tcp_minmss)
tp->t_flags2 |= TF2_PLPMTU_PMTUD;
else
tp->t_flags2 &= ~TF2_PLPMTU_PMTUD;
if (tp->t_state == TCPS_SYN_SENT)
TCP_PROBE5(connect__request, NULL, tp, ip6, tp, th);
TCP_PROBE5(send, NULL, tp, ip6, tp, th);
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
#ifdef TCPPCAP
/* Save packet, if requested. */
tcp_pcap_add(th, m, &(tp->t_outpkts));
#endif
/* TODO: IPv6 IP6TOS_ECT bit on */
error = ip6_output(m, tp->t_inpcb->in6p_outputopts, &ro,
((so->so_options & SO_DONTROUTE) ? IP_ROUTETOIF : 0),
NULL, NULL, tp->t_inpcb);
if (error == EMSGSIZE && ro.ro_rt != NULL)
mtu = ro.ro_rt->rt_mtu;
RO_RTFREE(&ro);
}
#endif /* INET6 */
#if defined(INET) && defined(INET6)
else
#endif
#ifdef INET
1994-05-24 10:09:53 +00:00
{
struct route ro;
bzero(&ro, sizeof(ro));
ip->ip_len = htons(m->m_pkthdr.len);
#ifdef INET6
if (tp->t_inpcb->inp_vflag & INP_IPV6PROTO)
ip->ip_ttl = in6_selecthlim(tp->t_inpcb, NULL);
#endif /* INET6 */
/*
* If we do path MTU discovery, then we set DF on every packet.
* This might not be the best thing to do according to RFC3390
* Section 2. However the tcp hostcache migitates the problem
* so it affects only the first tcp connection with a host.
*
* NB: Don't set DF on small MTU/MSS to have a safe fallback.
*/
if (V_path_mtu_discovery && tp->t_maxseg > V_tcp_minmss) {
ip->ip_off |= htons(IP_DF);
tp->t_flags2 |= TF2_PLPMTU_PMTUD;
} else {
tp->t_flags2 &= ~TF2_PLPMTU_PMTUD;
}
if (tp->t_state == TCPS_SYN_SENT)
TCP_PROBE5(connect__request, NULL, tp, ip, tp, th);
TCP_PROBE5(send, NULL, tp, ip, tp, th);
There are times when it would be really nice to have a record of the last few packets and/or state transitions from each TCP socket. That would help with narrowing down certain problems we see in the field that are hard to reproduce without understanding the history of how we got into a certain state. This change provides just that. It saves copies of the last N packets in a list in the tcpcb. When the tcpcb is destroyed, the list is freed. I thought this was likely to be more performance-friendly than saving copies of the tcpcb. Plus, with the packets, you should be able to reverse-engineer what happened to the tcpcb. To enable the feature, you will need to compile a kernel with the TCPPCAP option. Even then, the feature defaults to being deactivated. You can activate it by setting a positive value for the number of captured packets. You can do that on either a global basis or on a per-socket basis (via a setsockopt call). There is no way to get the packets out of the kernel other than using kmem or getting a coredump. I thought that would help some of the legal/privacy concerns regarding such a feature. However, it should be possible to add a future effort to export them in PCAP format. I tested this at low scale, and found that there were no mbuf leaks and the peak mbuf usage appeared to be unchanged with and without the feature. The main performance concern I can envision is the number of mbufs that would be used on systems with a large number of sockets. If you save five packets per direction per socket and have 3,000 sockets, that will consume at least 30,000 mbufs just to keep these packets. I tried to reduce the concerns associated with this by limiting the number of clusters (not mbufs) that could be used for this feature. Again, in my testing, that appears to work correctly. Differential Revision: D3100 Submitted by: Jonathan Looney <jlooney at juniper dot net> Reviewed by: gnn, hiren
2015-10-14 00:35:37 +00:00
#ifdef TCPPCAP
/* Save packet, if requested. */
tcp_pcap_add(th, m, &(tp->t_outpkts));
#endif
error = ip_output(m, tp->t_inpcb->inp_options, &ro,
((so->so_options & SO_DONTROUTE) ? IP_ROUTETOIF : 0), 0,
tp->t_inpcb);
if (error == EMSGSIZE && ro.ro_rt != NULL)
mtu = ro.ro_rt->rt_mtu;
RO_RTFREE(&ro);
1994-05-24 10:09:53 +00:00
}
#endif /* INET */
out:
/*
* In transmit state, time the transmission and arrange for
* the retransmit. In persist state, just set snd_max.
*/
if ((tp->t_flags & TF_FORCEDATA) == 0 ||
!tcp_timer_active(tp, TT_PERSIST)) {
tcp_seq startseq = tp->snd_nxt;
/*
* Advance snd_nxt over sequence space of this segment.
*/
if (flags & (TH_SYN|TH_FIN)) {
if (flags & TH_SYN)
tp->snd_nxt++;
if (flags & TH_FIN) {
tp->snd_nxt++;
tp->t_flags |= TF_SENTFIN;
}
}
if (sack_rxmit)
goto timer;
tp->snd_nxt += len;
if (SEQ_GT(tp->snd_nxt, tp->snd_max)) {
tp->snd_max = tp->snd_nxt;
/*
* Time this transmission if not a retransmission and
* not currently timing anything.
*/
if (tp->t_rtttime == 0) {
tp->t_rtttime = ticks;
tp->t_rtseq = startseq;
TCPSTAT_INC(tcps_segstimed);
}
}
/*
* Set retransmit timer if not currently set,
* and not doing a pure ack or a keep-alive probe.
* Initial value for retransmit timer is smoothed
* round-trip time + 2 * round-trip time variance.
* Initialize shift counter which is used for backoff
* of retransmit time.
*/
timer:
if (!tcp_timer_active(tp, TT_REXMT) &&
((sack_rxmit && tp->snd_nxt != tp->snd_max) ||
(tp->snd_nxt != tp->snd_una))) {
if (tcp_timer_active(tp, TT_PERSIST)) {
tcp_timer_activate(tp, TT_PERSIST, 0);
tp->t_rxtshift = 0;
}
tcp_timer_activate(tp, TT_REXMT, tp->t_rxtcur);
} else if (len == 0 && sbavail(&so->so_snd) &&
!tcp_timer_active(tp, TT_REXMT) &&
!tcp_timer_active(tp, TT_PERSIST)) {
/*
* Avoid a situation where we do not set persist timer
* after a zero window condition. For example:
* 1) A -> B: packet with enough data to fill the window
* 2) B -> A: ACK for #1 + new data (0 window
* advertisement)
* 3) A -> B: ACK for #2, 0 len packet
*
* In this case, A will not activate the persist timer,
* because it chose to send a packet. Unless tcp_output
* is called for some other reason (delayed ack timer,
* another input packet from B, socket syscall), A will
* not send zero window probes.
*
* So, if you send a 0-length packet, but there is data
* in the socket buffer, and neither the rexmt or
* persist timer is already set, then activate the
* persist timer.
*/
tp->t_rxtshift = 0;
tcp_setpersist(tp);
}
} else {
/*
* Persist case, update snd_max but since we are in
* persist mode (no window) we do not update snd_nxt.
*/
int xlen = len;
if (flags & TH_SYN)
++xlen;
if (flags & TH_FIN) {
++xlen;
tp->t_flags |= TF_SENTFIN;
}
if (SEQ_GT(tp->snd_nxt + xlen, tp->snd_max))
tp->snd_max = tp->snd_nxt + len;
}
1994-05-24 10:09:53 +00:00
if (error) {
/*
* We know that the packet was lost, so back out the
* sequence number advance, if any.
*
* If the error is EPERM the packet got blocked by the
* local firewall. Normally we should terminate the
* connection but the blocking may have been spurious
* due to a firewall reconfiguration cycle. So we treat
* it like a packet loss and let the retransmit timer and
* timeouts do their work over time.
* XXX: It is a POLA question whether calling tcp_drop right
* away would be the really correct behavior instead.
*/
if (((tp->t_flags & TF_FORCEDATA) == 0 ||
!tcp_timer_active(tp, TT_PERSIST)) &&
((flags & TH_SYN) == 0) &&
(error != EPERM)) {
if (sack_rxmit) {
p->rxmit -= len;
tp->sackhint.sack_bytes_rexmit -= len;
KASSERT(tp->sackhint.sack_bytes_rexmit >= 0,
("sackhint bytes rtx >= 0"));
} else
tp->snd_nxt -= len;
}
SOCKBUF_UNLOCK_ASSERT(&so->so_snd); /* Check gotos. */
switch (error) {
case EPERM:
tp->t_softerror = error;
return (error);
case ENOBUFS:
if (!tcp_timer_active(tp, TT_REXMT) &&
!tcp_timer_active(tp, TT_PERSIST))
tcp_timer_activate(tp, TT_REXMT, tp->t_rxtcur);
tp->snd_cwnd = tp->t_maxseg;
1994-05-24 10:09:53 +00:00
return (0);
case EMSGSIZE:
/*
* For some reason the interface we used initially
* to send segments changed to another or lowered
* its MTU.
* If TSO was active we either got an interface
* without TSO capabilits or TSO was turned off.
* If we obtained mtu from ip_output() then update
* it and try again.
*/
if (tso)
tp->t_flags &= ~TF_TSO;
if (mtu != 0) {
tcp_mss_update(tp, -1, mtu, NULL, NULL);
goto again;
}
return (error);
case EHOSTDOWN:
case EHOSTUNREACH:
case ENETDOWN:
case ENETUNREACH:
if (TCPS_HAVERCVDSYN(tp->t_state)) {
tp->t_softerror = error;
return (0);
}
/* FALLTHROUGH */
default:
return (error);
1994-05-24 10:09:53 +00:00
}
}
TCPSTAT_INC(tcps_sndtotal);
1994-05-24 10:09:53 +00:00
/*
* Data sent (as far as we can tell).
* If this advertises a larger window than any other segment,
* then remember the size of the advertised window.
* Any pending ACK has now been sent.
*/
if (recwin >= 0 && SEQ_GT(tp->rcv_nxt + recwin, tp->rcv_adv))
tp->rcv_adv = tp->rcv_nxt + recwin;
1994-05-24 10:09:53 +00:00
tp->last_ack_sent = tp->rcv_nxt;
tp->t_flags &= ~(TF_ACKNOW | TF_DELACK);
if (tcp_timer_active(tp, TT_DELACK))
tcp_timer_activate(tp, TT_DELACK, 0);
#if 0
/*
* This completely breaks TCP if newreno is turned on. What happens
* is that if delayed-acks are turned on on the receiver, this code
* on the transmitter effectively destroys the TCP window, forcing
* it to four packets (1.5Kx4 = 6K window).
*/
This commit marks the first formal contribution of the "Five New TCP Congestion Control Algorithms for FreeBSD" FreeBSD Foundation funded project. More details about the project are available at: http://caia.swin.edu.au/freebsd/5cc/ - Add a KPI and supporting infrastructure to allow modular congestion control algorithms to be used in the net stack. Algorithms can maintain per-connection state if required, and connections maintain their own algorithm pointer, which allows different connections to concurrently use different algorithms. The TCP_CONGESTION socket option can be used with getsockopt()/setsockopt() to programmatically query or change the congestion control algorithm respectively from within an application at runtime. - Integrate the framework with the TCP stack in as least intrusive a manner as possible. Care was also taken to develop the framework in a way that should allow integration with other congestion aware transport protocols (e.g. SCTP) in the future. The hope is that we will one day be able to share a single set of congestion control algorithm modules between all congestion aware transport protocols. - Introduce a new congestion recovery (TF_CONGRECOVERY) state into the TCP stack and use it to decouple the meaning of recovery from a congestion event and recovery from packet loss (TF_FASTRECOVERY) a la RFC2581. ECN and delay based congestion control protocols don't generally need to recover from packet loss and need a different way to note a congestion recovery episode within the stack. - Remove the net.inet.tcp.newreno sysctl, which simplifies some portions of code and ensures the stack always uses the appropriate mechanisms for recovering from packet loss during a congestion recovery episode. - Extract the NewReno congestion control algorithm from the TCP stack and massage it into module form. NewReno is always built into the kernel and will remain the default algorithm for the forseeable future. Implementations of additional different algorithms will become available in the near future. - Bump __FreeBSD_version to 900025 and note in UPDATING that rebuilding code that relies on the size of "struct tcpcb" is required. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. In collaboration with: David Hayes <dahayes at swin edu au> and Grenville Armitage <garmitage at swin edu au> Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: rpaulo Tested by: David Hayes (and many others over the years) MFC after: 3 months
2010-11-12 06:41:55 +00:00
if (sendalot && --maxburst)
1994-05-24 10:09:53 +00:00
goto again;
#endif
if (sendalot)
goto again;
1994-05-24 10:09:53 +00:00
return (0);
}
void
tcp_setpersist(struct tcpcb *tp)
1994-05-24 10:09:53 +00:00
{
int t = ((tp->t_srtt >> 2) + tp->t_rttvar) >> 1;
int tt;
1994-05-24 10:09:53 +00:00
TCP reuses t_rxtshift to determine the backoff timer used for both the persist state and the retransmit timer. However, the code that implements "bad retransmit recovery" only checks t_rxtshift to see if an ACK has been received in during the first retransmit timeout window. As a result, if ticks has wrapped over to a negative value and a socket is in the persist state, it can incorrectly treat an ACK from the remote peer as a "bad retransmit recovery" and restore saved values such as snd_ssthresh and snd_cwnd. However, if the socket has never had a retransmit timeout, then these saved values will be zero, so snd_ssthresh and snd_cwnd will be set to 0. If the socket is in fast recovery (this can be caused by excessive duplicate ACKs such as those fixed by 220794), then each ACK that arrives triggers either NewReno or SACK partial ACK handling which clamps snd_cwnd to be no larger than snd_ssthresh. In effect, the socket's send window is permamently stuck at 0 even though the remote peer is advertising a much larger window and pending data is only sent via TCP window probes (so one byte every few seconds). Fix this by adding a new TCP pcb flag (TF_PREVVALID) that indicates that the various snd_*_prev fields in the pcb are valid and only perform "bad retransmit recovery" if this flag is set in the pcb. The flag is set on the first retransmit timeout that occurs and is cleared on subsequent retransmit timeouts or when entering the persist state. Reviewed by: bz MFC after: 2 weeks
2011-04-29 15:40:12 +00:00
tp->t_flags &= ~TF_PREVVALID;
if (tcp_timer_active(tp, TT_REXMT))
panic("tcp_setpersist: retransmit pending");
1994-05-24 10:09:53 +00:00
/*
* Start/restart persistance timer.
*/
TCPT_RANGESET(tt, t * tcp_backoff[tp->t_rxtshift],
tcp_persmin, tcp_persmax);
tcp_timer_activate(tp, TT_PERSIST, tt);
1994-05-24 10:09:53 +00:00
if (tp->t_rxtshift < TCP_MAXRXTSHIFT)
tp->t_rxtshift++;
}
/*
* Insert TCP options according to the supplied parameters to the place
* optp in a consistent way. Can handle unaligned destinations.
*
* The order of the option processing is crucial for optimal packing and
* alignment for the scarce option space.
*
* The optimal order for a SYN/SYN-ACK segment is:
* MSS (4) + NOP (1) + Window scale (3) + SACK permitted (2) +
* Timestamp (10) + Signature (18) = 38 bytes out of a maximum of 40.
*
* The SACK options should be last. SACK blocks consume 8*n+2 bytes.
* So a full size SACK blocks option is 34 bytes (with 4 SACK blocks).
* At minimum we need 10 bytes (to generate 1 SACK block). If both
* TCP Timestamps (12 bytes) and TCP Signatures (18 bytes) are present,
* we only have 10 bytes for SACK options (40 - (12 + 18)).
*/
int
tcp_addoptions(struct tcpopt *to, u_char *optp)
{
u_int mask, optlen = 0;
for (mask = 1; mask < TOF_MAXOPT; mask <<= 1) {
if ((to->to_flags & mask) != mask)
continue;
if (optlen == TCP_MAXOLEN)
break;
switch (to->to_flags & mask) {
case TOF_MSS:
while (optlen % 4) {
optlen += TCPOLEN_NOP;
*optp++ = TCPOPT_NOP;
}
if (TCP_MAXOLEN - optlen < TCPOLEN_MAXSEG)
continue;
optlen += TCPOLEN_MAXSEG;
*optp++ = TCPOPT_MAXSEG;
*optp++ = TCPOLEN_MAXSEG;
to->to_mss = htons(to->to_mss);
bcopy((u_char *)&to->to_mss, optp, sizeof(to->to_mss));
optp += sizeof(to->to_mss);
break;
case TOF_SCALE:
while (!optlen || optlen % 2 != 1) {
optlen += TCPOLEN_NOP;
*optp++ = TCPOPT_NOP;
}
if (TCP_MAXOLEN - optlen < TCPOLEN_WINDOW)
continue;
optlen += TCPOLEN_WINDOW;
*optp++ = TCPOPT_WINDOW;
*optp++ = TCPOLEN_WINDOW;
*optp++ = to->to_wscale;
break;
case TOF_SACKPERM:
while (optlen % 2) {
optlen += TCPOLEN_NOP;
*optp++ = TCPOPT_NOP;
}
if (TCP_MAXOLEN - optlen < TCPOLEN_SACK_PERMITTED)
continue;
optlen += TCPOLEN_SACK_PERMITTED;
*optp++ = TCPOPT_SACK_PERMITTED;
*optp++ = TCPOLEN_SACK_PERMITTED;
break;
case TOF_TS:
while (!optlen || optlen % 4 != 2) {
optlen += TCPOLEN_NOP;
*optp++ = TCPOPT_NOP;
}
if (TCP_MAXOLEN - optlen < TCPOLEN_TIMESTAMP)
continue;
optlen += TCPOLEN_TIMESTAMP;
*optp++ = TCPOPT_TIMESTAMP;
*optp++ = TCPOLEN_TIMESTAMP;
to->to_tsval = htonl(to->to_tsval);
to->to_tsecr = htonl(to->to_tsecr);
bcopy((u_char *)&to->to_tsval, optp, sizeof(to->to_tsval));
optp += sizeof(to->to_tsval);
bcopy((u_char *)&to->to_tsecr, optp, sizeof(to->to_tsecr));
optp += sizeof(to->to_tsecr);
break;
#ifdef TCP_SIGNATURE
case TOF_SIGNATURE:
{
int siglen = TCPOLEN_SIGNATURE - 2;
while (!optlen || optlen % 4 != 2) {
optlen += TCPOLEN_NOP;
*optp++ = TCPOPT_NOP;
}
if (TCP_MAXOLEN - optlen < TCPOLEN_SIGNATURE)
continue;
optlen += TCPOLEN_SIGNATURE;
*optp++ = TCPOPT_SIGNATURE;
*optp++ = TCPOLEN_SIGNATURE;
to->to_signature = optp;
while (siglen--)
*optp++ = 0;
break;
}
#endif
case TOF_SACK:
{
int sackblks = 0;
struct sackblk *sack = (struct sackblk *)to->to_sacks;
tcp_seq sack_seq;
while (!optlen || optlen % 4 != 2) {
optlen += TCPOLEN_NOP;
*optp++ = TCPOPT_NOP;
}
if (TCP_MAXOLEN - optlen < TCPOLEN_SACKHDR + TCPOLEN_SACK)
continue;
optlen += TCPOLEN_SACKHDR;
*optp++ = TCPOPT_SACK;
sackblks = min(to->to_nsacks,
(TCP_MAXOLEN - optlen) / TCPOLEN_SACK);
*optp++ = TCPOLEN_SACKHDR + sackblks * TCPOLEN_SACK;
while (sackblks--) {
sack_seq = htonl(sack->start);
bcopy((u_char *)&sack_seq, optp, sizeof(sack_seq));
optp += sizeof(sack_seq);
sack_seq = htonl(sack->end);
bcopy((u_char *)&sack_seq, optp, sizeof(sack_seq));
optp += sizeof(sack_seq);
optlen += TCPOLEN_SACK;
sack++;
}
TCPSTAT_INC(tcps_sack_send_blocks);
break;
}
#ifdef TCP_RFC7413
case TOF_FASTOPEN:
{
int total_len;
/* XXX is there any point to aligning this option? */
total_len = TCPOLEN_FAST_OPEN_EMPTY + to->to_tfo_len;
if (TCP_MAXOLEN - optlen < total_len)
continue;
*optp++ = TCPOPT_FAST_OPEN;
*optp++ = total_len;
if (to->to_tfo_len > 0) {
bcopy(to->to_tfo_cookie, optp, to->to_tfo_len);
optp += to->to_tfo_len;
}
optlen += total_len;
break;
}
#endif
default:
panic("%s: unknown TCP option type", __func__);
break;
}
}
/* Terminate and pad TCP options to a 4 byte boundary. */
if (optlen % 4) {
optlen += TCPOLEN_EOL;
*optp++ = TCPOPT_EOL;
}
/*
* According to RFC 793 (STD0007):
* "The content of the header beyond the End-of-Option option
* must be header padding (i.e., zero)."
* and later: "The padding is composed of zeros."
*/
while (optlen % 4) {
optlen += TCPOLEN_PAD;
*optp++ = TCPOPT_PAD;
}
KASSERT(optlen <= TCP_MAXOLEN, ("%s: TCP options too long", __func__));
return (optlen);
}