2001-09-27 23:55:28 +00:00
|
|
|
.\" Copyright (c) 2001 Wind River Systems
|
|
|
|
.\" Copyright (c) 1997, 1998, 1999, 2000, 2001
|
|
|
|
.\" Bill Paul <wpaul@windriver.com>. All rights reserved.
|
|
|
|
.\"
|
|
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
|
|
.\" modification, are permitted provided that the following conditions
|
|
|
|
.\" are met:
|
|
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
|
|
.\" must display the following acknowledgement:
|
|
|
|
.\" This product includes software developed by Bill Paul.
|
|
|
|
.\" 4. Neither the name of the author nor the names of any co-contributors
|
|
|
|
.\" may be used to endorse or promote products derived from this software
|
|
|
|
.\" without specific prior written permission.
|
|
|
|
.\"
|
|
|
|
.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
|
|
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
|
|
.\" THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
.\"
|
|
|
|
.\" $FreeBSD$
|
|
|
|
.\"
|
|
|
|
.Dd September 27, 2001
|
|
|
|
.Dt BGE 4
|
|
|
|
.Os
|
|
|
|
.Sh NAME
|
|
|
|
.Nm bge
|
|
|
|
.Nd "Broadcom BCM570x PCI gigabit ethernet adapter driver"
|
|
|
|
.Sh SYNOPSIS
|
|
|
|
.Cd "device miibus"
|
|
|
|
.Cd "device bge"
|
|
|
|
.Sh DESCRIPTION
|
|
|
|
The
|
|
|
|
.Nm
|
|
|
|
driver provides support for various NICs based on the Broadcom BCM570x
|
|
|
|
family of gigabit ethernet controller chips, including the
|
|
|
|
following:
|
|
|
|
.Pp
|
|
|
|
.Bl -bullet -compact
|
|
|
|
.It
|
|
|
|
3Com 3c996-T (10/100/1000baseTX)
|
|
|
|
.It
|
|
|
|
Dell PowerEdge 2550 integrated BCM5700 NIC (10/100/1000baseTX)
|
|
|
|
.It
|
2002-09-08 19:20:23 +00:00
|
|
|
IBM x235 server integrated BCM5703x NIC (10/100/1000baseTX)
|
|
|
|
.It
|
2003-03-25 18:08:57 +00:00
|
|
|
HP ProLiant NC7760 embedded Gigabit NIC (10/100/1000baseTX)
|
|
|
|
.It
|
|
|
|
HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX)
|
|
|
|
.It
|
|
|
|
HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX)
|
|
|
|
.It
|
2002-01-27 01:00:16 +00:00
|
|
|
Netgear GA302T (10/100/1000baseTX)
|
|
|
|
.It
|
2001-09-27 23:55:28 +00:00
|
|
|
SysKonnect SK-9D21 (10/100/1000baseTX)
|
|
|
|
.It
|
|
|
|
SysKonnect SK-9D41 (1000baseSX)
|
|
|
|
.El
|
|
|
|
.Pp
|
|
|
|
All of these NICs are capable of 10, 100 and 1000Mbps speeds over CAT5
|
|
|
|
copper cable, except for the SysKonnect SK-9D41 which supports only
|
|
|
|
1000Mbps over multimode fiber.
|
2001-10-26 17:11:50 +00:00
|
|
|
The BCM570x builds upon the technology of the Alteon Tigon II.
|
|
|
|
It has two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant.
|
|
|
|
It supports IP, TCP
|
2001-09-27 23:55:28 +00:00
|
|
|
and UDP checksum checksum offload for both receive and transmit,
|
|
|
|
multiple RX and TX DMA rings for QoS applications, rules-based
|
|
|
|
receive filtering, and VLAN tag stripping/insertion as well as
|
2001-10-26 17:11:50 +00:00
|
|
|
a 256-bit multicast hash filter.
|
|
|
|
Additional features may be
|
2001-09-27 23:55:28 +00:00
|
|
|
provided via value-add firmware updates.
|
|
|
|
The BCM570x supports TBI (ten bit interface) and GMII
|
|
|
|
transceivers, which means it can be used with either copper of 1000baseX
|
2001-10-26 17:11:50 +00:00
|
|
|
fiber applications.
|
|
|
|
Note however the device only supports a single
|
2001-09-27 23:55:28 +00:00
|
|
|
speed in TBI mode.
|
|
|
|
.Pp
|
2002-09-08 19:20:23 +00:00
|
|
|
Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
|
2002-01-21 12:09:13 +00:00
|
|
|
copper gigabit transceivers,
|
2001-09-27 23:55:28 +00:00
|
|
|
which support autonegotiation of 10, 100 and 1000mbps modes in
|
|
|
|
full or half duplex.
|
|
|
|
.Pp
|
2002-09-08 19:20:23 +00:00
|
|
|
The BCM570x also supports jumbo frames, which can be configured
|
2001-09-27 23:55:28 +00:00
|
|
|
via the interface MTU setting.
|
|
|
|
Selecting an MTU larger than 1500 bytes with the
|
|
|
|
.Xr ifconfig 8
|
|
|
|
utility configures the adapter to receive and transmit jumbo frames.
|
|
|
|
Using jumbo frames can greatly improve performance for certain tasks,
|
|
|
|
such as file transfers and data streaming.
|
|
|
|
.Pp
|
|
|
|
The
|
|
|
|
.Nm
|
|
|
|
driver supports the following media types:
|
2001-10-26 17:11:50 +00:00
|
|
|
.Bl -tag -width ".Cm 10baseT/UTP"
|
2001-09-27 23:55:28 +00:00
|
|
|
.It Cm autoselect
|
|
|
|
Enable autoselection of the media type and options.
|
|
|
|
The user can manually override
|
|
|
|
the autoselected mode by adding media options to
|
|
|
|
.Xr rc.conf 5 .
|
|
|
|
.It Cm 10baseT/UTP
|
|
|
|
Set 10Mbps operation.
|
|
|
|
The
|
|
|
|
.Xr ifconfig 8
|
|
|
|
.Ic mediaopt
|
|
|
|
option can also be used to select either
|
|
|
|
.Cm full-duplex
|
|
|
|
or
|
|
|
|
.Cm half-duplex
|
|
|
|
modes.
|
|
|
|
.It Cm 100baseTX
|
|
|
|
Set 100Mbps (fast ethernet) operation.
|
|
|
|
The
|
|
|
|
.Xr ifconfig 8
|
|
|
|
.Ic mediaopt
|
|
|
|
option can also be used to select either
|
|
|
|
.Cm full-duplex
|
|
|
|
or
|
|
|
|
.Cm half-duplex
|
|
|
|
modes.
|
|
|
|
.It Cm 1000baseTX
|
2003-05-20 22:07:03 +00:00
|
|
|
Set 1000baseTX operation over twisted pair.
|
|
|
|
Only
|
2001-09-27 23:55:28 +00:00
|
|
|
.Cm full-duplex
|
2003-03-25 18:08:57 +00:00
|
|
|
mode is supported.
|
2001-09-27 23:55:28 +00:00
|
|
|
.It Cm 1000baseSX
|
|
|
|
Set 1000Mbps (gigabit ethernet) operation.
|
|
|
|
Both
|
|
|
|
.Cm full-duplex
|
|
|
|
and
|
|
|
|
.Cm half-duplex
|
|
|
|
modes are supported.
|
|
|
|
.El
|
|
|
|
.Pp
|
|
|
|
The
|
|
|
|
.Nm
|
|
|
|
driver supports the following media options:
|
2001-10-26 17:11:50 +00:00
|
|
|
.Bl -tag -width ".Cm full-duplex"
|
2001-09-27 23:55:28 +00:00
|
|
|
.It Cm full-duplex
|
|
|
|
Force full duplex operation.
|
|
|
|
.It Cm half-duplex
|
|
|
|
Force half duplex operation.
|
|
|
|
.El
|
|
|
|
.Pp
|
|
|
|
The
|
|
|
|
.Nm
|
|
|
|
driver also supports one special link option for 1000baseTX cards:
|
2001-10-26 17:11:50 +00:00
|
|
|
.Bl -tag -width ".Cm link0"
|
2001-09-27 23:55:28 +00:00
|
|
|
.It Cm link0
|
|
|
|
With 1000baseTX cards, establishing a link between two ports requires
|
|
|
|
that one port be configured as a master and the other a slave.
|
|
|
|
With autonegotiation,
|
|
|
|
the master/slave settings will be chosen automatically.
|
|
|
|
However when manually selecting the link state, it is necessary to
|
|
|
|
force one side of the link to be a master and the other a slave.
|
|
|
|
The
|
|
|
|
.Nm
|
|
|
|
driver configures the ports as slaves by default.
|
|
|
|
Setting the
|
|
|
|
.Cm link0
|
|
|
|
flag with
|
|
|
|
.Xr ifconfig 8
|
|
|
|
will set a port as a master instead.
|
|
|
|
.El
|
|
|
|
.Pp
|
|
|
|
For more information on configuring this device, see
|
|
|
|
.Xr ifconfig 8 .
|
|
|
|
.Sh DIAGNOSTICS
|
|
|
|
.Bl -diag
|
|
|
|
.It "bge%d: couldn't map memory"
|
|
|
|
A fatal initialization error has occurred.
|
|
|
|
.It "bge%d: couldn't map ports"
|
|
|
|
A fatal initialization error has occurred.
|
|
|
|
.It "bge%d: couldn't map interrupt"
|
|
|
|
A fatal initialization error has occurred.
|
|
|
|
.It "bge%d: no memory for softc struct!"
|
|
|
|
The driver failed to allocate memory for per-device instance information
|
|
|
|
during initialization.
|
|
|
|
.It "bge%d: failed to enable memory mapping!"
|
|
|
|
The driver failed to initialize PCI shared memory mapping.
|
|
|
|
This might
|
|
|
|
happen if the card is not in a bus-master slot.
|
|
|
|
.It "bge%d: no memory for jumbo buffers!"
|
|
|
|
The driver failed to allocate memory for jumbo frames during
|
|
|
|
initialization.
|
|
|
|
.It "bge%d: watchdog timeout"
|
|
|
|
The device has stopped responding to the network, or there is a problem with
|
|
|
|
the network connection (cable).
|
|
|
|
.El
|
|
|
|
.Sh SEE ALSO
|
|
|
|
.Xr arp 4 ,
|
2003-02-15 17:12:53 +00:00
|
|
|
.Xr miibus 4 ,
|
2001-09-27 23:55:28 +00:00
|
|
|
.Xr netintro 4 ,
|
|
|
|
.Xr ng_ether 4 ,
|
|
|
|
.Xr vlan 4 ,
|
|
|
|
.Xr ifconfig 8
|
|
|
|
.Sh HISTORY
|
|
|
|
The
|
|
|
|
.Nm
|
|
|
|
device driver first appeared in
|
2001-10-26 17:11:50 +00:00
|
|
|
.Fx 4.5 .
|
2001-09-27 23:55:28 +00:00
|
|
|
.Sh AUTHORS
|
|
|
|
The
|
|
|
|
.Nm
|
|
|
|
driver was written by
|
|
|
|
.An Bill Paul Aq wpaul@windriver.com .
|