Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
|
|
|
# $FreeBSD$
|
|
|
|
|
|
|
|
|
|
# Set default baseline values of CPUTYPE based on MACHINE_ARCH -- this is
|
|
|
|
|
# the minimum CPU type we support for each architecture
|
|
|
|
|
|
|
|
|
|
.if ${MACHINE_ARCH} == "i386"
|
|
|
|
|
CPUTYPE ?= i386
|
|
|
|
|
.elif ${MACHINE_ARCH} == "alpha"
|
|
|
|
|
CPUTYPE ?= ev4
|
|
|
|
|
.elif ${MACHINE_ARCH} == "ia64"
|
|
|
|
|
CPUTYPE ?= itanium
|
|
|
|
|
.endif
|
|
|
|
|
|
|
|
|
|
# Handle aliases (not documented in make.conf to avoid user confusion
|
|
|
|
|
# between e.g. i586 and pentium)
|
|
|
|
|
|
|
|
|
|
.if ${MACHINE_ARCH} == "i386"
|
|
|
|
|
. if ${CPUTYPE} == "pentiumpro"
|
|
|
|
|
CPUTYPE = i686
|
|
|
|
|
. elif ${CPUTYPE} == "pentium"
|
|
|
|
|
CPUTYPE = i586
|
|
|
|
|
. elif ${CPUTYPE} == "athlon"
|
|
|
|
|
CPUTYPE = k7
|
|
|
|
|
. endif
|
|
|
|
|
.endif
|
|
|
|
|
|
|
|
|
|
# Logic to set up correct gcc optimization flag. This must be included
|
|
|
|
|
# after /etc/make.conf so it can react to the local value of CPUTYPE
|
|
|
|
|
# defined therein.
|
|
|
|
|
|
|
|
|
|
.if !defined(NO_CPU_CFLAGS)
|
|
|
|
|
. if ${MACHINE_ARCH} == "i386"
|
|
|
|
|
. if ${CPUTYPE} == "k7"
|
|
|
|
|
CFLAGS += -march=k6 # gcc doesn't support athlon yet, but it will
|
2001-02-27 11:21:47 +00:00
|
|
|
. elif ${CPUTYPE} == "k6-2"
|
|
|
|
|
CFLAGS += -march=k6
|
Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
|
|
|
. elif ${CPUTYPE} == "k6"
|
|
|
|
|
CFLAGS += -march=k6
|
|
|
|
|
. elif ${CPUTYPE} == "k5"
|
|
|
|
|
CFLAGS += -march=pentium
|
2001-02-27 11:21:47 +00:00
|
|
|
. elif ${CPUTYPE} == "p4"
|
|
|
|
|
CFLAGS += -march=pentiumpro
|
|
|
|
|
. elif ${CPUTYPE} == "p3"
|
|
|
|
|
CFLAGS += -march=pentiumpro
|
|
|
|
|
. elif ${CPUTYPE} == "p2"
|
|
|
|
|
CFLAGS += -march=pentiumpro
|
Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
|
|
|
. elif ${CPUTYPE} == "i686"
|
|
|
|
|
CFLAGS += -march=pentiumpro
|
2001-02-27 11:21:47 +00:00
|
|
|
. elif ${CPUTYPE} == "i586/mmx"
|
|
|
|
|
CFLAGS += -march=pentium
|
Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
|
|
|
. elif ${CPUTYPE} == "i586"
|
|
|
|
|
CFLAGS += -march=pentium
|
|
|
|
|
. elif ${CPUTYPE} == "i486"
|
|
|
|
|
CFLAGS += -m486
|
|
|
|
|
. endif
|
|
|
|
|
. elif ${MACHINE_ARCH} == "alpha"
|
|
|
|
|
. if ${CPUTYPE} == "ev6"
|
|
|
|
|
CFLAGS += -mcpu=ev6
|
|
|
|
|
. elif ${CPUTYPE} == "pca56"
|
|
|
|
|
CFLAGS += -mcpu=pca56
|
|
|
|
|
. elif ${CPUTYPE} == "ev56"
|
|
|
|
|
CFLAGS += -mcpu=ev56
|
|
|
|
|
. elif ${CPUTYPE} == "ev5"
|
|
|
|
|
CFLAGS += -mcpu=ev5
|
|
|
|
|
. elif ${CPUTYPE} == "ev45"
|
|
|
|
|
CFLAGS += -mcpu=ev4 # No -mcpu=ev45 for gcc
|
|
|
|
|
. elif ${CPUTYPE} == "ev4"
|
|
|
|
|
CFLAGS += -mcpu=ev4
|
|
|
|
|
. endif
|
|
|
|
|
. endif
|
|
|
|
|
.endif
|
|
|
|
|
|
|
|
|
|
# Set up the list of CPU features based on the CPU type. This is an
|
|
|
|
|
# unordered list to make it easy for client makefiles to test for the
|
|
|
|
|
# presence of a CPU feature.
|
|
|
|
|
|
|
|
|
|
.if ${MACHINE_ARCH} == "i386"
|
|
|
|
|
. if ${CPUTYPE} == "k7"
|
2001-02-27 11:21:47 +00:00
|
|
|
MACHINE_CPU = k7 3dnow k6 k5 i586 i486 i386
|
|
|
|
|
. elif ${CPUTYPE} == "k6-2"
|
|
|
|
|
MACHINE_CPU = 3dnow k6 k5 i586 i486 i386
|
Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
|
|
|
. elif ${CPUTYPE} == "k6"
|
|
|
|
|
MACHINE_CPU = k6 k5 i586 i486 i386
|
|
|
|
|
. elif ${CPUTYPE} == "k5"
|
|
|
|
|
MACHINE_CPU = k5 i586 i486 i386
|
2001-02-27 11:21:47 +00:00
|
|
|
. elif ${CPUTYPE} == "p4"
|
|
|
|
|
MACHINE_CPU = sse i686 mmx i586 i486 i386
|
|
|
|
|
. elif ${CPUTYPE} == "p3"
|
|
|
|
|
MACHINE_CPU = sse i686 mmx i586 i486 i386
|
|
|
|
|
. elif ${CPUTYPE} == "p2"
|
|
|
|
|
MACHINE_CPU = sse i686 mmx i586 i486 i386
|
Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
|
|
|
. elif ${CPUTYPE} == "i686"
|
|
|
|
|
MACHINE_CPU = i686 i586 i486 i386
|
2001-02-27 11:21:47 +00:00
|
|
|
. elif ${CPUTYPE} == "i586/mmx"
|
|
|
|
|
MACHINE_CPU = mmx i586 i486 i386
|
Overhaul the MACHINE_CPU behaviour:
* Rip out MACHINE_CPU stuff from sys.mk and include a new <bsd.cpu.mk>
after we pull in /etc/make.conf. We need to do it afterwards so we can
react to the user setting of the:
* CPUTYPE variable, which contains the CPU type which the user wants to
optimize for. For example, if you want your binaries to only run on an
i686-class machine (or higher), set this to i686. If you want to support
running binaries on a variety of CPU generations, set this to the lowest
common denominator. Supported values are listed in make.conf.
* bsd.cpu.mk does the expansion of CPUTYPE into MACHINE_CPU using the
(hopefully) correct unordered list of CPU types which should be used on
that CPU. For example, an AMD k6 CPU wants any of the following:
k6 k5 i586 i486 i386
This is still an unordered list so the client makefile logic is simple -
client makefiles need to test for the various elements of the set in
decreasing order of priority using ${MACHINE_CPU:M<foo>}, as before.
The various MACHINE_CPU lists are believed to be correct, but should be
checked.
* If NO_CPU_CFLAGS is not defined, add relevant gcc compiler optimization
settings by default (e.g. -karch=k6 for CPUTYPE=k6, etc). Release
builders and developers of third-party software need to make sure not to
enable CPU-specific optimization when generating code intended to be
portable. We probably need to move to an /etc/world.conf to allow the
optimization stuff to be applied separately to world/kernel and external
compilations, but it's not any worse a problem than it was before.
* Add coverage for the ia64/itanium MACHINE_ARCH/CPUTYPE.
* Add CPUTYPE support for all of the CPU types supported by FreeBSD and gcc
(only i386, alpha and ia64 first, since those are the minimally-working
ports. Other architecture porters, please feel free to add the relevant
gunk for your platform).
Reviewed by: jhb, obrien
2001-02-22 11:14:25 +00:00
|
|
|
. elif ${CPUTYPE} == "i586"
|
|
|
|
|
MACHINE_CPU = i586 i486 i386
|
|
|
|
|
. elif ${CPUTYPE} == "i486"
|
|
|
|
|
MACHINE_CPU = i486 i386
|
|
|
|
|
. elif ${CPUTYPE} == "i386"
|
|
|
|
|
MACHINE_CPU = i386
|
|
|
|
|
. endif
|
|
|
|
|
.elif ${MACHINE_ARCH} == "alpha"
|
|
|
|
|
. if ${CPUTYPE} == "ev6"
|
|
|
|
|
MACHINE_CPU = ev6 ev56 pca56 ev5 ev45 ev4
|
|
|
|
|
. elif ${CPUTYPE} == "pca56"
|
|
|
|
|
MACHINE_CPU = pca56 ev56 ev5 ev45 ev4
|
|
|
|
|
. elif ${CPUTYPE} == "ev56"
|
|
|
|
|
MACHINE_CPU = ev56 ev5 ev45 ev4
|
|
|
|
|
. elif ${CPUTYPE} == "ev5"
|
|
|
|
|
MACHINE_CPU = ev5 ev45 ev4
|
|
|
|
|
. elif ${CPUTYPE} == "ev45"
|
|
|
|
|
MACHINE_CPU = ev45 ev4
|
|
|
|
|
. elif ${CPUTYPE} == "ev4"
|
|
|
|
|
MACHINE_CPU = ev4
|
|
|
|
|
. endif
|
|
|
|
|
.elif ${MACHINE_ARCH} == "ia64"
|
|
|
|
|
. if ${CPUTYPE} == "itanium"
|
|
|
|
|
MACHINE_CPU = itanium
|
|
|
|
|
. endif
|
|
|
|
|
.endif
|