d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
44f7cbf586
freebsd-nq/sys/dev/ixgbe/README

324 lines
12 KiB
Plaintext
Raw Normal View History

First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
FreeBSD Driver for Intel(R) Ethernet 10 Gigabit PCI Express Server Adapters
============================================================================
Update the ixgbe driver to 1.7.4, this includes support for the new 82599 adapter family, adds header split, and many small fixes. The driver should now be added to the GENERIC kernel. MFC after: 2 weeks
2009-04-10 00:22:48 +00:00
/*$FreeBSD$*/
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
November 12, 2010
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Contents
========
- Overview
- Supported Adapters
- Building and Installation
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
- Additional Configurations and Tuning
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
- Known Limitations
Overview
========
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
This file describes the FreeBSD* driver for the Intel(R) Ethernet 10 Gigabit
Family of Adapters. Driver has been developed for use with FreeBSD 7.2 or later.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
For questions related to hardware requirements, refer to the documentation
supplied with your Intel 10GbE adapter. All hardware requirements listed
apply to use with FreeBSD.
Supported Adapters
==================
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
The driver in this release is compatible with 82598 and 82599-based Intel
Network Connections.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
SFP+ Devices with Pluggable Optics
----------------------------------
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
82599-BASED ADAPTERS
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
NOTE: If your 82599-based Intel(R) Ethernet Network Adapter came with Intel
optics, or is an Intel(R) Ethernet Server Adapter X520-2, then it only supports
Intel optics and/or the direct attach cables listed below.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
When 82599-based SFP+ devices are connected back to back, they should be set to
the same Speed setting via Ethtool. Results may vary if you mix speed settings.
Supplier Type Part Numbers
SR Modules
Intel DUAL RATE 1G/10G SFP+ SR (bailed) FTLX8571D3BCV-IT
Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDZ-IN2
Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDDZ-IN1
LR Modules
Intel DUAL RATE 1G/10G SFP+ LR (bailed) FTLX1471D3BCV-IT
Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDZ-IN2
Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDDZ-IN1
The following is a list of 3rd party SFP+ modules and direct attach cables that
have received some testing. Not all modules are applicable to all devices.
Supplier Type Part Numbers
Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL
Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ
Finisar SFP+ LR bailed, 10g single rate FTLX8571D3BCV-IT
Finisar DUAL RATE 1G/10G SFP+ SR (No Bail) FTLX8571D3QCV-IT
Avago DUAL RATE 1G/10G SFP+ SR (No Bail) AFBR-703SDZ-IN1
Finisar DUAL RATE 1G/10G SFP+ LR (No Bail) FTLX1471D3QCV-IT
Avago DUAL RATE 1G/10G SFP+ LR (No Bail) AFCT-701SDZ-IN1
Finistar 1000BASE-T SFP FCLF8522P2BTL
Avago 1000BASE-T SFP ABCU-5710RZ
82599-based adapters support all passive and active limiting direct attach
cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.
Laser turns off for SFP+ when ifconfig down
--------------------------------------------------------
"ifconfig down" turns off the laser for 82599-based SFP+ fiber adapters.
"ifconfig up" turns on the later.
82598-BASED ADAPTERS
NOTES for 82598-Based Adapters:
- Intel(R) Ethernet Network Adapters that support removable optical modules
only support their original module type (i.e., the Intel(R) 10 Gigabit SR
Dual Port Express Module only supports SR optical modules). If you plug
in a different type of module, the driver will not load.
- Hot Swapping/hot plugging optical modules is not supported.
- Only single speed, 10 gigabit modules are supported.
- LAN on Motherboard (LOMs) may support DA, SR, or LR modules. Other module
types are not supported. Please see your system documentation for details.
The following is a list of 3rd party SFP+ modules and direct attach cables that have
received some testing. Not all modules are applicable to all devices.
Supplier Type Part Numbers
Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL
Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ
Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL
82598-based adapters support all passive direct attach cables that comply
with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach
cables are not supported.
Third party optic modules and cables referred to above are listed only for the
purpose of highlighting third party specifications and potential compatibility,
and are not recommendations or endorsements or sponsorship of any third party's
product by Intel. Intel is not endorsing or promoting products made by any
third party and the third party reference is provided only to share information
regarding certain optic modules and cables with the above specifications. There
may be other manufacturers or suppliers, producing or supplying optic modules
and cables with similar or matching descriptions. Customers must use their own
discretion and diligence to purchase optic modules and cables from any third
party of their choice. Customer are solely responsible for assessing the
suitability of the product and/or devices and for the selection of the vendor
for purchasing any product. INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF
SUCH THIRD PARTY PRODUCTS OR SELECTION OF VENDOR BY CUSTOMERS.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Configuration and Tuning
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
========================
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
The driver supports Transmit/Receive Checksum Offload and Jumbo Frames on
all 10 Gigabit adapters.
Jumbo Frames
------------
To enable Jumbo Frames, use the ifconfig utility to increase the MTU
beyond 1500 bytes.
NOTES:
- The Jumbo Frames setting on the switch must be set to at least
22 bytes larger than that of the adapter.
- There are known performance issues with this driver when running
UDP traffic with Jumbo Frames.
The Jumbo Frames MTU range for Intel Adapters is 1500 to 16114. The default
MTU range is 1500. To modify the setting, enter the following:
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
ifconfig ix<interface_num> <hostname or IP address> mtu 9000
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
To confirm an interface's MTU value, use the ifconfig command. To confirm
the MTU used between two specific devices, use:
route get <destination_IP_address>
VLANs
-----
To create a new VLAN pseudo-interface:
ifconfig <vlan_name> create
To associate the VLAN pseudo-interface with a physical interface and
assign a VLAN ID, IP address, and netmask:
ifconfig <vlan_name> <ip_address> netmask <subnet_mask> vlan
<vlan_id> vlandev <physical_interface>
Example:
ifconfig vlan10 10.0.0.1 netmask 255.255.255.0 vlan 10 vlandev ixgbe0
In this example, all packets will be marked on egress with 802.1Q VLAN
tags, specifying a VLAN ID of 10.
To remove a VLAN pseudo-interface:
ifconfig <vlan_name> destroy
Checksum Offload
----------------
Checksum offloading supports both TCP and UDP packets and is
supported for both transmit and receive.
Checksum offloading can be enabled or disabled using ifconfig.
Both transmit and receive offloading will be either enabled or
disabled together. You cannot enable/disable one without the other.
To enable checksum offloading:
ifconfig <interface_num> rxcsum
To disable checksum offloading:
ifconfig <interface_num> -rxcsum
To confirm the current setting:
ifconfig <interface_num>
TSO
---
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
TSO is enabled by default.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
To disable:
ifconfig <interface_num> -tso
To re-enable:
ifconfig <interface_num> tso
LRO
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
---
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
Large Receive Offload is available in the driver; it is on by default.
It can be disabled by using:
ifconfig <interface_num> -lro
To enable:
ifconfig <interface_num> lro
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Important system configuration changes:
---------------------------------------
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
When there is a choice run on a 64bit OS rather than 32, it makes a
significant difference in improvement.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
The default scheduler SCHED_4BSD is not smart about SMP locality issues.
Significant improvement can be achieved by switching to the ULE scheduler.
This is done by changing the entry in the config file from SCHED_4BSD to
SCHED_ULE. Note that this is only advisable on FreeBSD 7, on 6.X there have
been stability problems with ULE.
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
The interface can generate high number of interrupts. To avoid running
into the limit set by the kernel, adjust hw.intr_storm_threshold
setting using sysctl:
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
sysctl hw.intr_storm_threshold=9000 (the default is 1000)
For this change to take effect on boot, edit /etc/sysctl.conf and add the
line:
hw.intr_storm_threshold=9000
If you still see Interrupt Storm detected messages, increase the limit to a
higher number.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Best throughput results are seen with a large MTU; use 9000 if possible.
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
The default number of descriptors is 1024, increasing this to 2K or even
4K may improve performance in some workloads, but change carefully.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Known Limitations
=================
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
For known hardware and troubleshooting issues, refer to the following website.
http://support.intel.com/support/go/network/adapter/home.htm
Either select the link for your adapter or perform a search for the adapter
number. The adapter's page lists many issues. For a complete list of hardware
issues download your adapter's user guide and read the Release Notes.
UDP stress test with 10GbE driver
---------------------------------
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Under small packets UDP stress test with 10GbE driver, the FreeBSD system
will drop UDP packets due to the fullness of socket buffers. You may want
to change the driver's Flow Control variables to the minimum value for
controlling packet reception.
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
Attempting to configure larger MTUs with a large numbers of processors may
generate the error message "ix0:could not setup receive structures"
--------------------------------------------------------------------------
When using the ixgbe driver with RSS autoconfigured based on the number of
cores (the default setting) and that number is larger than 4, increase the
memory resources allocated for the mbuf pool as follows:
Add to the sysctl.conf file for the system:
kern.ipc.nmbclusters=262144
kern.ipc.nmbjumbop=262144
Lower than expected performance on dual port 10GbE devices
----------------------------------------------------------
Some PCI-E x8 slots are actually configured as x4 slots. These slots have
insufficient bandwidth for full 10Gbe line rate with dual port 10GbE devices.
The driver can detect this situation and will write the following message in
the system log: "PCI-Express bandwidth available for this card is not
sufficient for optimal performance. For optimal performance a x8 PCI-Express
slot is required."
If this error occurs, moving your adapter to a true x8 slot will resolve the
issue.
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
Support
=======
For general information and support, go to the Intel support website at:
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
www.intel.com/support/
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
If an issue is identified with the released source code on the supported
kernel with a supported adapter, email the specific information related to
First off: update the driver README, the old one was horribly crusty, and this still isn't perfect, but its at least a bit more recent. Secondly, a few improvements to the driver from Andrew Boyer, support hint to allow devices to not attach, add VLAN_HWTSO capability so vlans can use TSO, fix in the interrupt handler to make sure the stack TX queue is processed. Oh, and also make sure IPv6 does not cause a re-init in the ioctl routine. Thanks for your efforts Andrew! Thanks to Claudio Jeker for noticing the ixgbe_xmit() routine was not correctly swapping the dma map from the first to the last descriptor in a multi-descriptor transmission, corrected this.
2011-06-02 00:34:57 +00:00
the issue to freebsd@intel.com
This is driver version 1.4.4 of the Intel ixgbe driver. -It has new hardware support -It uses a new method of TX cleanup called Head Write Back -It includes the provisional generic TCP LRO feature contributed by Myricom and made general purpose by me. This should move into the stack upon approval but for this driver drop its in here. -Also bug fixes and etc... MFC in a week if no serious issues arise.
2008-05-16 18:46:30 +00:00
License
=======
This software program is released under the terms of a license agreement
between you ('Licensee') and Intel. Do not use or load this software or any
associated materials (collectively, the 'Software') until you have carefully
read the full terms and conditions of the LICENSE located in this software
package. By loading or using the Software, you agree to the terms of this
Agreement. If you do not agree with the terms of this Agreement, do not
install or use the Software.
* Other names and brands may be claimed as the property of others.
Reference in New Issue Copy Permalink