d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
47a5ab295a
freebsd-nq/sys/powerpc/conf/GENERIC

193 lines
6.7 KiB
Plaintext
Raw Normal View History

The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
#
# GENERIC -- Generic kernel configuration file for FreeBSD/powerpc
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
Fix the link to the Handbook
2002-08-01 17:21:18 +00:00
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
Various comment and minor style fixes. No actual content changes. Inspired by: bde
2002-07-16 18:20:17 +00:00
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
#
# $FreeBSD$
Rename OEA to AIM. The former means nothing as it applies to all processors (it's the PowerPC Operating Environment Architecture). AIM designates the processors made by the Apple-IBM-Motorola alliance and those we typically support. While here, remove the NetBSD option IPKDB. It's not an option used by us. Also, PPC_HAVE_FPU is not used by us either. Remove that too. Obtained from: Juniper, Semihalf
2007-12-16 00:45:56 +00:00
cpu AIM
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
ident GENERIC
MFppc64: Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
2010-07-13 05:32:19 +00:00
machine powerpc powerpc
Remove obsolete GEOM option, and bring diskless options up-to-date Approved by: benno
2003-01-09 01:09:41 +00:00
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# Platform support
options POWERMAC #NewWorld Apple PowerMacs
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options PSIM #GDB PSIM ppc simulator
Add support for the IBM Full-System Simulator (Mambo). This code has been developed against the 970 and Cell simulators.
2010-07-31 13:22:34 +00:00
options MAMBO #IBM Mambo Full System Simulator
Bring this in line with what I'm using.
2002-07-09 13:46:27 +00:00
Use the "options " spelling (vs. "options<TAB>") so that commented lines line up nicely.
2008-05-21 03:36:53 +00:00
options SCHED_ULE #ULE scheduler
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options INET #InterNETworking
options INET6 #IPv6 communications protocols
Use the correct expanded name for SCTP. PR: 116496 Submitted by: koitsu Reviewed by: rrs Approved by: re (kensmith)
2007-09-26 20:05:07 +00:00
options SCTP #Stream Control Transmission Protocol
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
Permits UFS ACLs to be used with the GENERIC kernel. Due to recent ACL configuration changes, this shouldn't result in different code paths for file systems not explicitly configured for ACLs by the system administrator. For UFS1, administrators must still recompile their kernel to add support for extended attributes; for UFS2, it's sufficient to enable ACLs using tunefs or at mount-time (tunefs preferred for reliability reasons). UFS2, for a variety of reasons, including performance and reliability, is the preferred file system for use with ACLs. Approved by: re
2002-10-19 16:54:15 +00:00
options UFS_ACL #Support for access control lists
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options UFS_DIRHASH #Improve performance on big directories
Remove trailing '.' for consistency!
2007-04-10 21:40:13 +00:00
options UFS_GJOURNAL #Enable gjournal-based UFS journaling
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options MD_ROOT #MD is a potential root device
This patch changes head so that the default NFS client is now the new NFS client (which I guess is no longer experimental). The fstype "newnfs" is now "nfs" and the regular/old NFS client is now fstype "oldnfs". Although mounts via fstype "nfs" will usually work without userland changes, an updated mount_nfs(8) binary is needed for kernels built with "options NFSCL" but not "options NFSCLIENT". Updated mount_nfs(8) and mount(8) binaries are needed to do mounts for fstype "oldnfs". The GENERIC kernel configs have been changed to use options NFSCL and NFSD (the new client and server) instead of NFSCLIENT and NFSSERVER. For kernels being used on diskless NFS root systems, "options NFSCL" must be in the kernel config. Discussed on freebsd-fs@.
2011-04-27 17:51:51 +00:00
options NFSCL #New Network Filesystem Client
options NFSD #New Network Filesystem Server
Add kernel module support for nfslockd and krpc. Use the module system to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k' option to rpc.lockd and make kernel NLM the default. A user can still force the use of the old user NLM by building a kernel without NFSLOCKD and/or removing the nfslockd.ko module.
2008-03-27 11:54:20 +00:00
options NFSLOCKD #Network Lock Manager
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options NFS_ROOT #NFS usable as root device
- move to SCHED_4BSD per jeffr's comments on SCHED_ULE's state - enable MSDOSFS - ehci is stable on the powerbook - modules have been working for a long time.
2005-05-03 11:56:05 +00:00
options MSDOSFS #MSDOS Filesystem
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
Evolve the ctlreq interface added to geom_gpt into a generic partitioning class that supports multiple schemes. Current schemes supported are APM (Apple Partition Map) and GPT. Change all GEOM_APPLE anf GEOM_GPT options into GEOM_PART_APM and GEOM_PART_GPT (resp). The ctlreq interface supports verbs to create and destroy partitioning schemes on a disk; to add, delete and modify partitions; and to commit or undo changes made.
2007-02-07 18:55:31 +00:00
options GEOM_PART_GPT #GUID Partition Tables.
Include GEOM_LABEL in GENERIC. It's very useful and not well publicized enough. Approved by: pjd
2007-02-09 19:03:18 +00:00
options GEOM_LABEL #Provides labelization
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options COMPAT_FREEBSD4 #Keep this for a while
Added COMPAT_FREEBSD6 option.
2006-09-26 12:36:34 +00:00
options COMPAT_FREEBSD5 #Compatible with FreeBSD5
options COMPAT_FREEBSD6 #Compatible with FreeBSD6
Add COMPAT_FREEBSD7 and enable it in configs that have COMPAT_FREEBSD6.
2008-01-07 21:40:11 +00:00
options COMPAT_FREEBSD7 #Compatible with FreeBSD7
Reduce annoying SCSI probing delay from 15 to 5 seconds in all GENRIC kernels. Discussed on: -current
2004-11-02 20:57:20 +00:00
options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options KTRACE #ktrace(1) syscall trace support
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
options STACK #stack(9) support
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
Uncomment options _KPOSIX_PRIORITY_SCHEDULING as it is enabled in the other architectures, and does not give any problems. Approved by: grehan (mentor)
2004-11-02 09:06:48 +00:00
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
Add HWPMC_HOOKS to GENERIC kernels, this makes hwpmc.ko work out of the box.
2008-07-07 22:55:11 +00:00
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
Enable AUDIT by default in the GENERIC kernel, allowing security event auditing to be turned on without a kernel recompile, just an rc.conf option. Approved by: re (kensmith) Obtained from: TrustedBSD Project
2007-06-08 20:29:07 +00:00
options AUDIT # Security event auditing
Remove MAC kernel config files and add "options MAC" to GENERIC, with the goal of shipping 8.0 with MAC support in the default kernel. No policies will be compiled in or enabled by default, but it will now be possible to load them at boot or runtime without a kernel recompile. While the framework is not believed to impose measurable overhead when no policies are loaded (a result of optimization over the past few months in HEAD), we'll continue to benchmark and optimize as the release approaches. Please keep an eye out for performance or functionality regressions that could be a result of this change. Approved by: re (kensmith) Obtained from: TrustedBSD Project
2009-06-02 18:31:08 +00:00
options MAC # TrustedBSD MAC Framework
Add INCLUDE_CONFIG_FILE in GENERIC on all non-embedded platforms. # This is the resolution of removing it from DEFAULTS... MFC after: 5 days
2010-01-10 17:44:22 +00:00
options INCLUDE_CONFIG_FILE # Include this file in kernel
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# Debugging for use in -current
Add new KDB option, and also drop in long-held fxp/dc eth drivers.
2004-07-12 22:14:21 +00:00
options KDB #Enable the kernel debugger
options DDB #Support DDB
Adjust style (following the already existing rules) for the newly introduced option DEADLKRES. Reported by: danfe, julian, avg
2010-02-15 23:44:48 +00:00
#options DEADLKRES #Enable the deadlock resolver
Fix whitespace problems with option lines.
2003-02-13 22:27:40 +00:00
options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
options WITNESS #Enable checks to detect deadlocks and cycles
Enable option WITNESS_SKIPSPIN by default.
2008-02-16 17:59:27 +00:00
options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
Add MALLOC_DEBUG_MAXZONES debug malloc(9) option to use multiple uma zones for each malloc bucket size. The purpose is to isolate different malloc types into hash classes, so that any buffer overruns or use-after-free will usually only affect memory from malloc types in that hash class. This is purely a debugging tool; by varying the hash function and tracking which hash class was corrupted, the intersection of the hash classes from each instance will point to a single malloc type that is being misused. At this point inspection or memguard(9) can be used to catch the offending code. Add MALLOC_DEBUG_MAXZONES=8 to -current GENERIC configuration files. The suggestion to have this on by default came from Kostik Belousov on -arch. This code is based on work by Ron Steinke at Isilon Systems. Reviewed by: -arch (mostly silence) Reviewed by: zml Approved by: zml (mentor)
2010-07-28 15:36:12 +00:00
options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# To make an SMP kernel, the next line is needed
SMP has worked perfectly for a very long time on 32-bit PowerPC on both UP and SMP hardware. Enable it in GENERIC. MFC after: 2 weeks
2011-05-06 20:43:02 +00:00
options SMP # Symmetric MultiProcessor Kernel
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
# CPU frequency control
device cpufreq
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# Standard busses
de-count pci
2002-07-23 06:38:47 +00:00
device pci
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC Macintoshes with an AGP bus.
2010-10-31 18:27:05 +00:00
device agp
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)). ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
# ATA controllers
device ahci # AHCI-compatible SATA controllers
device ata # Legacy ATA/SATA controllers
options ATA_CAM # Handle legacy controllers with CAM
device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA
device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
Add a few SCSI controllers to GENERIC that can be found on Powermacs. This allows installation onto SCSI disks as shipped, for example, with the Powermac G3. PR: powerpc/138543 Obtained from: sparc64 MFC after: 3 days
2009-09-10 21:25:05 +00:00
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_ALLOW_MEMIO # Attempt to use memory mapped I/O
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
device isp # Qlogic family
device ispfw # Firmware module for Qlogic host adapters
device mpt # LSI-Logic MPT-Fusion
device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)). ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
# ATA/SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
add scbus for FireWire.
2003-04-22 04:39:20 +00:00
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)). ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
device pass # Passthrough device (direct ATA/SCSI access)
add scbus for FireWire.
2003-04-22 04:39:20 +00:00
Add syscons options and enable USB, since there is no conflict between the OpenFirmware console and the syscons console when using a USB keyboard.
2004-01-21 05:22:53 +00:00
# syscons is the default console driver, resembling an SCO console
device sc
Add kbdmux(4). This avoids having to use the hint.pcib.1.skipslot=26 trick on a PowerBook G4 and friends to get the USB keyboard as ukbd0.
2006-04-07 22:04:07 +00:00
device kbdmux
Use the "options " spelling (vs. "options<TAB>") so that commented lines line up nicely.
2008-05-21 03:36:53 +00:00
options SC_OFWFB # OFW frame buffer
options SC_DFLT_FONT # compile font in
Add syscons options and enable USB, since there is no conflict between the OpenFirmware console and the syscons console when using a USB keyboard.
2004-01-21 05:22:53 +00:00
makeoptions SC_DFLT_FONT=cp437
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# Serial (COM) ports
o Enable -Werror o Remove commented-out sio(4) o Remove zs(4) o Add scc(4) o Add uart(4)
2006-07-26 17:34:05 +00:00
device scc
device uart
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
Add bge(4). Fix a white-space nit while I'm here.
2007-04-01 06:24:19 +00:00
device bge # Broadcom BCM570xx Gigabit Ethernet
Add support for the Apple Big Mac (BMAC) Ethernet controller, found on various Apple G3 models. Submitted by: Nathan Whitehorn
2008-06-07 22:58:32 +00:00
device bm # Apple BMAC Ethernet
It's Apple GMAC, not HMAC. Approved by: jake (for sparc64)
2002-09-22 01:18:06 +00:00
device gem # Sun GEM/Sun ERI/Apple GMAC
Add bge(4). Fix a white-space nit while I'm here.
2007-04-01 06:24:19 +00:00
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
In -CURRENT pseudo devices are not statically assigned at compile time, remove a stale comment. PR: kern/62285
2004-07-18 09:03:12 +00:00
# Pseudo devices.
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
device loop # Network loopback
Break out the MI part of the /dev/[k]mem and /dev/io drivers into their own directory and module, leaving the MD parts in the MD area (the MD parts _are_ part of the modules). /dev/mem and /dev/io are now loadable modules, thus taking us one step further towards a kernel created entirely out of modules. Of course, there is nothing preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
device random # Entropy device
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
device ether # Ethernet support
Add vlan(4) to all GENERIC kernels. MFC after: 1 week
2010-01-03 20:40:54 +00:00
device vlan # 802.1Q VLAN support
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
device tun # Packet tunnel.
Integrate the new MPSAFE TTY layer to the FreeBSD operating system. The last half year I've been working on a replacement TTY layer for the FreeBSD kernel. The new TTY layer was designed to improve the following: - Improved driver model: The old TTY layer has a driver model that is not abstract enough to make it friendly to use. A good example is the output path, where the device drivers directly access the output buffers. This means that an in-kernel PPP implementation must always convert network buffers into TTY buffers. If a PPP implementation would be built on top of the new TTY layer (still needs a hooks layer, though), it would allow the PPP implementation to directly hand the data to the TTY driver. - Improved hotplugging: With the old TTY layer, it isn't entirely safe to destroy TTY's from the system. This implementation has a two-step destructing design, where the driver first abandons the TTY. After all threads have left the TTY, the TTY layer calls a routine in the driver, which can be used to free resources (unit numbers, etc). The pts(4) driver also implements this feature, which means posix_openpt() will now return PTY's that are created on the fly. - Improved performance: One of the major improvements is the per-TTY mutex, which is expected to improve scalability when compared to the old Giant locking. Another change is the unbuffered copying to userspace, which is both used on TTY device nodes and PTY masters. Upgrading should be quite straightforward. Unlike previous versions, existing kernel configuration files do not need to be changed, except when they reference device drivers that are listed in UPDATING. Obtained from: //depot/projects/mpsafetty/... Approved by: philip (ex-mentor) Discussed: on the lists, at BSDCan, at the DevSummit Sponsored by: Snow B.V., the Netherlands dcons(4) fixed by: kan
2008-08-20 08:31:58 +00:00
device pty # BSD-style compatibility pseudo ttys
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
device md # Memory "disks"
Instead of "OpenFirmware", "openfirmware", etc. use the official spelling "Open Firmware" from IEEE 1275 and OpenFirmware.org (no pun intended). Ok'ed by: tmm
2004-08-16 15:45:27 +00:00
device ofwd # Open Firmware disks
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying/(translation)
Add a few SCSI controllers to GENERIC that can be found on Powermacs. This allows installation onto SCSI disks as shipped, for example, with the Powermac G3. PR: powerpc/138543 Obtained from: sparc64 MFC after: 3 days
2009-09-10 21:25:05 +00:00
device firmware # firmware assist module
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
Add a comment to note that pseudo-device bpf is required for DHCP. This is mentioned in the Handbook but it is not as obvious to new users why bpf is needed compared to the other largely self-explanatory items in GENERIC. PR: conf/40855 MFC after: 1 week
2005-03-18 15:24:00 +00:00
# Note that 'bpf' is required for DHCP.
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
device bpf #Berkeley packet filter
Change over the usb kernel options to the new stack (retaining existing naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
# USB support
Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had the illusion of a tunable setting but was always turned on regardless. MFC after: 1 week
2010-04-22 21:31:34 +00:00
options USB_DEBUG # enable debug msgs
Change over the usb kernel options to the new stack (retaining existing naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface
device usb # USB Bus (required)
device uhid # "Human Interface Devices"
device ukbd # Keyboard
- Use "device\t" and "options \t" for consistency.
2009-05-10 00:00:25 +00:00
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
Change over the usb kernel options to the new stack (retaining existing naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da0
device ums # Mouse
Add atp(4) to powerpc GENERIC. Most late-generation Apple PowerPC laptops have trackpads that do not work at all without this driver.
2009-11-29 20:51:23 +00:00
device atp # Apple USB touchpad
Change over the usb kernel options to the new stack (retaining existing naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
device urio # Diamond Rio 500 MP3 player
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
# USB Ethernet
Change over the usb kernel options to the new stack (retaining existing naming). The old usb stack can be compiled in my prefixing the name with 'o'.
2009-02-23 18:34:56 +00:00
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
Updated to somewhat match sparc64/conf/GENERIC Approved by: benno
2002-09-19 11:20:13 +00:00
Add FireWire drivers to GENERIC.
2003-04-21 16:44:05 +00:00
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
Add device to access and modify Open Firmware NVRAM settings in PowerPC-based Apple's machines and small utility to do it from userland modelled after the similar utility in Darwin/OSX. Only tested on 1.25GHz G4 Mac Mini. MFC after: 1 month
2006-08-01 22:19:01 +00:00
# Misc
Add a new driver, the ad7417, to read temperatures and voltages on some PowerMac's. Approved by: nwhitehorn (mentor)
2011-05-29 14:25:42 +00:00
device ad7417 # PowerMac7,2 temperature sensor
Add three new drivers for fan control and temperature reading on the PowerMac7,2. - The fcu driver lets us read and write the fan RPMs for all fans in the PowerMac7,2. This driver is PowerMac specific. - The ds1775 is a driver to read the temperature for the drive bay sensor. - The max6690 is another driver to read temperatures. Here it is used to read the inlet, the backside and the U3 heatsink temperature. An additional driver, the ad7417, will follow later. Thanks to nwhitehorn for guiding me through this driver development. Approved by: nwhitehorn (mentor)
2010-10-15 20:08:16 +00:00
device ds1775 # PowerMac7,2 temperature sensor
device fcu # Apple Fan Control Unit
device max6690 # PowerMac7,2 temperature sensor
Add device to access and modify Open Firmware NVRAM settings in PowerPC-based Apple's machines and small utility to do it from userland modelled after the similar utility in Darwin/OSX. Only tested on 1.25GHz G4 Mac Mini. MFC after: 1 month
2006-08-01 22:19:01 +00:00
device powermac_nvram # Open Firmware configuration NVRAM
Add cpufreq support on the PowerPC G5, along with a skeleton SMU driver in order to slew CPU voltage during frequency changes. The OpenBSD SMU driver was an extremely helpful reference for this.
2009-06-23 04:28:32 +00:00
device smu # Apple System Management Unit
Add device to access and modify Open Firmware NVRAM settings in PowerPC-based Apple's machines and small utility to do it from userland modelled after the similar utility in Darwin/OSX. Only tested on 1.25GHz G4 Mac Mini. MFC after: 1 month
2006-08-01 22:19:01 +00:00
Add ADB support. This provides support for the external ADB bus on the PowerMac G3 as well as the internal ADB keyboard and mice in PowerBooks and iBooks. This also brings in Mac GPIO support, for which we should eventually have a better interface. Obtained from: NetBSD (CUDA and PMU drivers)
2008-10-26 19:37:38 +00:00
# ADB support
device adb
device cuda
device pmu
Add support for the I2S and davbus audio controllers found in Apple PowerPC hardware. Submitted by: Marco Trillo
2009-01-25 18:20:15 +00:00
# Powermac I2C support
device iicbus # I2C bus code
device kiic # Keywest I2C
Reference in New Issue Copy Permalink