freebsd-nq/sbin/fsdb/fsdb.c

1203 lines
28 KiB
C
Raw Normal View History

/* $NetBSD: fsdb.c,v 1.2 1995/10/08 23:18:10 thorpej Exp $ */
/*
* Copyright (c) 1995 John T. Kohl
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR `AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef lint
static const char rcsid[] =
1999-08-28 00:22:10 +00:00
"$FreeBSD$";
#endif /* not lint */
#include <sys/param.h>
#include <sys/time.h>
#include <ctype.h>
#include <err.h>
#include <grp.h>
#include <histedit.h>
#include <pwd.h>
#include <string.h>
#include <timeconv.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ufs/dir.h>
#include <ufs/ffs/fs.h>
#include "fsdb.h"
#include "fsck.h"
static void usage(void) __dead2;
int cmdloop(void);
static int compare_blk32(uint32_t *wantedblk, uint32_t curblk);
static int compare_blk64(uint64_t *wantedblk, uint64_t curblk);
static int founddatablk(uint64_t blk);
static int find_blks32(uint32_t *buf, int size, uint32_t *blknum);
static int find_blks64(uint64_t *buf, int size, uint64_t *blknum);
static int find_indirblks32(uint32_t blk, int ind_level, uint32_t *blknum);
static int find_indirblks64(uint64_t blk, int ind_level, uint64_t *blknum);
static void
usage(void)
{
fprintf(stderr, "usage: fsdb [-d] [-f] [-r] fsname\n");
exit(1);
}
int returntosingle;
char nflag;
/*
* We suck in lots of fsck code, and just pick & choose the stuff we want.
*
* fsreadfd is set up to read from the file system, fswritefd to write to
* the file system.
*/
int
main(int argc, char *argv[])
{
int ch, rval;
char *fsys = NULL;
while (-1 != (ch = getopt(argc, argv, "fdr"))) {
switch (ch) {
case 'f':
/* The -f option is left for historical
* reasons and has no meaning.
*/
break;
case 'd':
debug++;
break;
case 'r':
nflag++; /* "no" in fsck, readonly for us */
break;
default:
usage();
}
}
argc -= optind;
argv += optind;
if (argc != 1)
usage();
else
fsys = argv[0];
sblock_init();
if (!setup(fsys))
errx(1, "cannot set up file system `%s'", fsys);
printf("%s file system `%s'\nLast Mounted on %s\n",
nflag? "Examining": "Editing", fsys, sblock.fs_fsmnt);
rval = cmdloop();
if (!nflag) {
sblock.fs_clean = 0; /* mark it dirty */
sbdirty();
ckfini(0);
printf("*** FILE SYSTEM MARKED DIRTY\n");
printf("*** BE SURE TO RUN FSCK TO CLEAN UP ANY DAMAGE\n");
printf("*** IF IT WAS MOUNTED, RE-MOUNT WITH -u -o reload\n");
}
exit(rval);
}
#define CMDFUNC(func) int func(int argc, char *argv[])
#define CMDFUNCSTART(func) int func(int argc, char *argv[])
CMDFUNC(helpfn);
CMDFUNC(focus); /* focus on inode */
CMDFUNC(active); /* print active inode */
CMDFUNC(blocks); /* print blocks for active inode */
CMDFUNC(focusname); /* focus by name */
CMDFUNC(zapi); /* clear inode */
CMDFUNC(uplink); /* incr link */
CMDFUNC(downlink); /* decr link */
CMDFUNC(linkcount); /* set link count */
CMDFUNC(quit); /* quit */
CMDFUNC(findblk); /* find block */
CMDFUNC(ls); /* list directory */
CMDFUNC(rm); /* remove name */
CMDFUNC(ln); /* add name */
CMDFUNC(newtype); /* change type */
CMDFUNC(chmode); /* change mode */
CMDFUNC(chlen); /* change length */
CMDFUNC(chaflags); /* change flags */
CMDFUNC(chgen); /* change generation */
CMDFUNC(chowner); /* change owner */
CMDFUNC(chgroup); /* Change group */
CMDFUNC(back); /* pop back to last ino */
CMDFUNC(chbtime); /* Change btime */
CMDFUNC(chmtime); /* Change mtime */
CMDFUNC(chctime); /* Change ctime */
CMDFUNC(chatime); /* Change atime */
CMDFUNC(chinum); /* Change inode # of dirent */
CMDFUNC(chname); /* Change dirname of dirent */
struct cmdtable cmds[] = {
{ "help", "Print out help", 1, 1, FL_RO, helpfn },
{ "?", "Print out help", 1, 1, FL_RO, helpfn },
{ "inode", "Set active inode to INUM", 2, 2, FL_RO, focus },
{ "clri", "Clear inode INUM", 2, 2, FL_WR, zapi },
{ "lookup", "Set active inode by looking up NAME", 2, 2, FL_RO | FL_ST, focusname },
{ "cd", "Set active inode by looking up NAME", 2, 2, FL_RO | FL_ST, focusname },
{ "back", "Go to previous active inode", 1, 1, FL_RO, back },
{ "active", "Print active inode", 1, 1, FL_RO, active },
{ "print", "Print active inode", 1, 1, FL_RO, active },
{ "blocks", "Print block numbers of active inode", 1, 1, FL_RO, blocks },
{ "uplink", "Increment link count", 1, 1, FL_WR, uplink },
{ "downlink", "Decrement link count", 1, 1, FL_WR, downlink },
{ "linkcount", "Set link count to COUNT", 2, 2, FL_WR, linkcount },
{ "findblk", "Find inode owning disk block(s)", 2, 33, FL_RO, findblk},
{ "ls", "List current inode as directory", 1, 1, FL_RO, ls },
{ "rm", "Remove NAME from current inode directory", 2, 2, FL_WR | FL_ST, rm },
{ "del", "Remove NAME from current inode directory", 2, 2, FL_WR | FL_ST, rm },
{ "ln", "Hardlink INO into current inode directory as NAME", 3, 3, FL_WR | FL_ST, ln },
{ "chinum", "Change dir entry number INDEX to INUM", 3, 3, FL_WR, chinum },
{ "chname", "Change dir entry number INDEX to NAME", 3, 3, FL_WR | FL_ST, chname },
{ "chtype", "Change type of current inode to TYPE", 2, 2, FL_WR, newtype },
{ "chmod", "Change mode of current inode to MODE", 2, 2, FL_WR, chmode },
{ "chlen", "Change length of current inode to LENGTH", 2, 2, FL_WR, chlen },
{ "chown", "Change owner of current inode to OWNER", 2, 2, FL_WR, chowner },
{ "chgrp", "Change group of current inode to GROUP", 2, 2, FL_WR, chgroup },
{ "chflags", "Change flags of current inode to FLAGS", 2, 2, FL_WR, chaflags },
{ "chgen", "Change generation number of current inode to GEN", 2, 2, FL_WR, chgen },
{ "btime", "Change btime of current inode to BTIME", 2, 2, FL_WR, chbtime },
{ "mtime", "Change mtime of current inode to MTIME", 2, 2, FL_WR, chmtime },
{ "ctime", "Change ctime of current inode to CTIME", 2, 2, FL_WR, chctime },
{ "atime", "Change atime of current inode to ATIME", 2, 2, FL_WR, chatime },
{ "quit", "Exit", 1, 1, FL_RO, quit },
{ "q", "Exit", 1, 1, FL_RO, quit },
{ "exit", "Exit", 1, 1, FL_RO, quit },
2004-10-09 15:56:34 +00:00
{ NULL, 0, 0, 0, 0, NULL },
};
int
helpfn(int argc, char *argv[])
{
struct cmdtable *cmdtp;
printf("Commands are:\n%-10s %5s %5s %s\n",
"command", "min args", "max args", "what");
for (cmdtp = cmds; cmdtp->cmd; cmdtp++)
printf("%-10s %5u %5u %s\n",
cmdtp->cmd, cmdtp->minargc-1, cmdtp->maxargc-1, cmdtp->helptxt);
return 0;
}
char *
prompt(EditLine *el)
{
static char pstring[64];
snprintf(pstring, sizeof(pstring), "fsdb (inum: %d)> ", curinum);
return pstring;
}
int
cmdloop(void)
{
char *line;
const char *elline;
int cmd_argc, rval = 0, known;
#define scratch known
char **cmd_argv;
struct cmdtable *cmdp;
History *hist;
EditLine *elptr;
2001-10-01 08:43:58 +00:00
HistEvent he;
curinode = ginode(ROOTINO);
curinum = ROOTINO;
printactive(0);
hist = history_init();
history(hist, &he, H_SETSIZE, 100); /* 100 elt history buffer */
2001-10-01 08:43:58 +00:00
elptr = el_init("fsdb", stdin, stdout, stderr);
el_set(elptr, EL_EDITOR, "emacs");
el_set(elptr, EL_PROMPT, prompt);
el_set(elptr, EL_HIST, history, hist);
el_source(elptr, NULL);
while ((elline = el_gets(elptr, &scratch)) != NULL && scratch != 0) {
if (debug)
printf("command `%s'\n", elline);
2001-10-01 08:43:58 +00:00
history(hist, &he, H_ENTER, elline);
line = strdup(elline);
cmd_argv = crack(line, &cmd_argc);
/*
* el_parse returns -1 to signal that it's not been handled
* internally.
*/
if (el_parse(elptr, cmd_argc, (const char **)cmd_argv) != -1)
continue;
if (cmd_argc) {
known = 0;
for (cmdp = cmds; cmdp->cmd; cmdp++) {
if (!strcmp(cmdp->cmd, cmd_argv[0])) {
if ((cmdp->flags & FL_WR) == FL_WR && nflag)
warnx("`%s' requires write access", cmd_argv[0]),
rval = 1;
else if (cmd_argc >= cmdp->minargc &&
cmd_argc <= cmdp->maxargc)
rval = (*cmdp->handler)(cmd_argc, cmd_argv);
else if (cmd_argc >= cmdp->minargc &&
(cmdp->flags & FL_ST) == FL_ST) {
strcpy(line, elline);
cmd_argv = recrack(line, &cmd_argc, cmdp->maxargc);
rval = (*cmdp->handler)(cmd_argc, cmd_argv);
} else
rval = argcount(cmdp, cmd_argc, cmd_argv);
known = 1;
break;
}
}
if (!known)
warnx("unknown command `%s'", cmd_argv[0]), rval = 1;
} else
rval = 0;
free(line);
if (rval < 0)
/* user typed "quit" */
return 0;
if (rval)
warnx("rval was %d", rval);
}
el_end(elptr);
history_end(hist);
return rval;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *curinode;
ino_t curinum, ocurrent;
#define GETINUM(ac,inum) inum = strtoul(argv[ac], &cp, 0); \
if (inum < ROOTINO || inum > maxino || cp == argv[ac] || *cp != '\0' ) { \
printf("inode %d out of range; range is [%d,%d]\n", \
inum, ROOTINO, maxino); \
return 1; \
}
/*
* Focus on given inode number
*/
CMDFUNCSTART(focus)
{
ino_t inum;
char *cp;
GETINUM(1,inum);
curinode = ginode(inum);
ocurrent = curinum;
curinum = inum;
printactive(0);
return 0;
}
CMDFUNCSTART(back)
{
curinum = ocurrent;
curinode = ginode(curinum);
printactive(0);
return 0;
}
CMDFUNCSTART(zapi)
{
ino_t inum;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
union dinode *dp;
char *cp;
GETINUM(1,inum);
dp = ginode(inum);
clearinode(dp);
inodirty();
if (curinode) /* re-set after potential change */
curinode = ginode(curinum);
return 0;
}
CMDFUNCSTART(active)
{
printactive(0);
return 0;
}
CMDFUNCSTART(blocks)
{
printactive(1);
return 0;
}
CMDFUNCSTART(quit)
{
return -1;
}
CMDFUNCSTART(uplink)
{
if (!checkactive())
return 1;
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_nlink, DIP(curinode, di_nlink) + 1);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
printf("inode %d link count now %d\n", curinum, DIP(curinode, di_nlink));
inodirty();
return 0;
}
CMDFUNCSTART(downlink)
{
if (!checkactive())
return 1;
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_nlink, DIP(curinode, di_nlink) - 1);
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
printf("inode %d link count now %d\n", curinum, DIP(curinode, di_nlink));
inodirty();
return 0;
}
const char *typename[] = {
"unknown",
"fifo",
"char special",
"unregistered #3",
"directory",
"unregistered #5",
"blk special",
"unregistered #7",
"regular",
"unregistered #9",
"symlink",
"unregistered #11",
"socket",
"unregistered #13",
"whiteout",
};
int slot;
int
scannames(struct inodesc *idesc)
{
struct direct *dirp = idesc->id_dirp;
printf("slot %d ino %d reclen %d: %s, `%.*s'\n",
slot++, dirp->d_ino, dirp->d_reclen, typename[dirp->d_type],
dirp->d_namlen, dirp->d_name);
return (KEEPON);
}
CMDFUNCSTART(ls)
{
struct inodesc idesc;
checkactivedir(); /* let it go on anyway */
slot = 0;
idesc.id_number = curinum;
idesc.id_func = scannames;
idesc.id_type = DATA;
idesc.id_fix = IGNORE;
ckinode(curinode, &idesc);
curinode = ginode(curinum);
return 0;
}
static int findblk_numtofind;
static int wantedblksize;
CMDFUNCSTART(findblk)
{
ino_t inum, inosused;
uint32_t *wantedblk32;
uint64_t *wantedblk64;
struct cg *cgp = &cgrp;
int c, i, is_ufs2;
wantedblksize = (argc - 1);
is_ufs2 = sblock.fs_magic == FS_UFS2_MAGIC;
ocurrent = curinum;
if (is_ufs2) {
wantedblk64 = calloc(wantedblksize, sizeof(uint64_t));
if (wantedblk64 == NULL)
err(1, "malloc");
for (i = 1; i < argc; i++)
wantedblk64[i - 1] = dbtofsb(&sblock, strtoull(argv[i], NULL, 0));
} else {
wantedblk32 = calloc(wantedblksize, sizeof(uint32_t));
if (wantedblk32 == NULL)
err(1, "malloc");
for (i = 1; i < argc; i++)
wantedblk32[i - 1] = dbtofsb(&sblock, strtoull(argv[i], NULL, 0));
}
findblk_numtofind = wantedblksize;
/*
* sblock.fs_ncg holds a number of cylinder groups.
* Iterate over all cylinder groups.
*/
for (c = 0; c < sblock.fs_ncg; c++) {
/*
* sblock.fs_ipg holds a number of inodes per cylinder group.
* Calculate a highest inode number for a given cylinder group.
*/
inum = c * sblock.fs_ipg;
/* Read cylinder group. */
getblk(&cgblk, cgtod(&sblock, c), sblock.fs_cgsize);
memcpy(cgp, cgblk.b_un.b_cg, sblock.fs_cgsize);
/*
* Get a highest used inode number for a given cylinder group.
* For UFS1 all inodes initialized at the newfs stage.
*/
if (is_ufs2)
inosused = cgp->cg_initediblk;
else
inosused = sblock.fs_ipg;
for (; inosused > 0; inum++, inosused--) {
/* Skip magic inodes: 0, WINO, ROOTINO. */
if (inum < ROOTINO)
continue;
/*
* Check if the block we are looking for is just an inode block.
*
* ino_to_fsba() - get block containing inode from its number.
* INOPB() - get a number of inodes in one disk block.
*/
if (is_ufs2 ?
compare_blk64(wantedblk64, ino_to_fsba(&sblock, inum)) :
compare_blk32(wantedblk32, ino_to_fsba(&sblock, inum))) {
printf("block %llu: inode block (%d-%d)\n",
(unsigned long long)fsbtodb(&sblock,
ino_to_fsba(&sblock, inum)),
(inum / INOPB(&sblock)) * INOPB(&sblock),
(inum / INOPB(&sblock) + 1) * INOPB(&sblock));
findblk_numtofind--;
if (findblk_numtofind == 0)
goto end;
}
/* Get on-disk inode aka dinode. */
curinum = inum;
curinode = ginode(inum);
/* Find IFLNK dinode with allocated data blocks. */
switch (DIP(curinode, di_mode) & IFMT) {
case IFDIR:
case IFREG:
if (DIP(curinode, di_blocks) == 0)
continue;
break;
case IFLNK:
{
uint64_t size = DIP(curinode, di_size);
if (size > 0 && size < sblock.fs_maxsymlinklen &&
DIP(curinode, di_blocks) == 0)
continue;
else
break;
}
default:
continue;
}
/* Look through direct data blocks. */
if (is_ufs2 ?
find_blks64(curinode->dp2.di_db, NDADDR, wantedblk64) :
find_blks32(curinode->dp1.di_db, NDADDR, wantedblk32))
goto end;
for (i = 0; i < NIADDR; i++) {
/*
* Does the block we are looking for belongs to the
* indirect blocks?
*/
if (is_ufs2 ?
compare_blk64(wantedblk64, curinode->dp2.di_ib[i]) :
compare_blk32(wantedblk32, curinode->dp1.di_ib[i]))
if (founddatablk(is_ufs2 ? curinode->dp2.di_ib[i] :
curinode->dp1.di_ib[i]))
goto end;
/*
* Search through indirect, double and triple indirect
* data blocks.
*/
if (is_ufs2 ? (curinode->dp2.di_ib[i] != 0) :
(curinode->dp1.di_ib[i] != 0))
if (is_ufs2 ?
find_indirblks64(curinode->dp2.di_ib[i], i,
wantedblk64) :
find_indirblks32(curinode->dp1.di_ib[i], i,
wantedblk32))
goto end;
}
}
}
end:
curinum = ocurrent;
curinode = ginode(curinum);
return 0;
}
static int
compare_blk32(uint32_t *wantedblk, uint32_t curblk)
{
int i;
for (i = 0; i < wantedblksize; i++) {
if (wantedblk[i] != 0 && wantedblk[i] == curblk) {
wantedblk[i] = 0;
return 1;
}
}
return 0;
}
static int
compare_blk64(uint64_t *wantedblk, uint64_t curblk)
{
int i;
for (i = 0; i < wantedblksize; i++) {
if (wantedblk[i] != 0 && wantedblk[i] == curblk) {
wantedblk[i] = 0;
return 1;
}
}
return 0;
}
static int
founddatablk(uint64_t blk)
{
printf("%llu: data block of inode %d\n",
(unsigned long long)fsbtodb(&sblock, blk), curinum);
findblk_numtofind--;
if (findblk_numtofind == 0)
return 1;
return 0;
}
static int
find_blks32(uint32_t *buf, int size, uint32_t *wantedblk)
{
int blk;
for (blk = 0; blk < size; blk++) {
if (buf[blk] == 0)
continue;
if (compare_blk32(wantedblk, buf[blk])) {
if (founddatablk(buf[blk]))
return 1;
}
}
return 0;
}
static int
find_indirblks32(uint32_t blk, int ind_level, uint32_t *wantedblk)
{
#define MAXNINDIR (MAXBSIZE / sizeof(uint32_t))
uint32_t idblk[MAXNINDIR];
int i;
blread(fsreadfd, (char *)idblk, fsbtodb(&sblock, blk), (int)sblock.fs_bsize);
if (ind_level <= 0) {
if (find_blks32(idblk, sblock.fs_bsize / sizeof(uint32_t), wantedblk))
return 1;
} else {
ind_level--;
for (i = 0; i < sblock.fs_bsize / sizeof(uint32_t); i++) {
if (compare_blk32(wantedblk, idblk[i])) {
if (founddatablk(idblk[i]))
return 1;
}
if (idblk[i] != 0)
if (find_indirblks32(idblk[i], ind_level, wantedblk))
return 1;
}
}
#undef MAXNINDIR
return 0;
}
static int
find_blks64(uint64_t *buf, int size, uint64_t *wantedblk)
{
int blk;
for (blk = 0; blk < size; blk++) {
if (buf[blk] == 0)
continue;
if (compare_blk64(wantedblk, buf[blk])) {
if (founddatablk(buf[blk]))
return 1;
}
}
return 0;
}
static int
find_indirblks64(uint64_t blk, int ind_level, uint64_t *wantedblk)
{
#define MAXNINDIR (MAXBSIZE / sizeof(uint64_t))
uint64_t idblk[MAXNINDIR];
int i;
blread(fsreadfd, (char *)idblk, fsbtodb(&sblock, blk), (int)sblock.fs_bsize);
if (ind_level <= 0) {
if (find_blks64(idblk, sblock.fs_bsize / sizeof(uint64_t), wantedblk))
return 1;
} else {
ind_level--;
for (i = 0; i < sblock.fs_bsize / sizeof(uint64_t); i++) {
if (compare_blk64(wantedblk, idblk[i])) {
if (founddatablk(idblk[i]))
return 1;
}
if (idblk[i] != 0)
if (find_indirblks64(idblk[i], ind_level, wantedblk))
return 1;
}
}
#undef MAXNINDIR
return 0;
}
int findino(struct inodesc *idesc); /* from fsck */
static int dolookup(char *name);
static int
dolookup(char *name)
{
struct inodesc idesc;
if (!checkactivedir())
return 0;
idesc.id_number = curinum;
idesc.id_func = findino;
idesc.id_name = name;
idesc.id_type = DATA;
idesc.id_fix = IGNORE;
if (ckinode(curinode, &idesc) & FOUND) {
curinum = idesc.id_parent;
curinode = ginode(curinum);
printactive(0);
return 1;
} else {
warnx("name `%s' not found in current inode directory", name);
return 0;
}
}
CMDFUNCSTART(focusname)
{
char *p, *val;
if (!checkactive())
return 1;
ocurrent = curinum;
if (argv[1][0] == '/') {
curinum = ROOTINO;
curinode = ginode(ROOTINO);
} else {
if (!checkactivedir())
return 1;
}
for (p = argv[1]; p != NULL;) {
while ((val = strsep(&p, "/")) != NULL && *val == '\0');
if (val) {
printf("component `%s': ", val);
fflush(stdout);
if (!dolookup(val)) {
curinode = ginode(curinum);
return(1);
}
}
}
return 0;
}
CMDFUNCSTART(ln)
{
ino_t inum;
int rval;
char *cp;
GETINUM(1,inum);
if (!checkactivedir())
return 1;
rval = makeentry(curinum, inum, argv[2]);
if (rval)
printf("Ino %d entered as `%s'\n", inum, argv[2]);
else
printf("could not enter name? weird.\n");
curinode = ginode(curinum);
return rval;
}
CMDFUNCSTART(rm)
{
int rval;
if (!checkactivedir())
return 1;
rval = changeino(curinum, argv[1], 0);
if (rval & ALTERED) {
printf("Name `%s' removed\n", argv[1]);
return 0;
} else {
printf("could not remove name ('%s')? weird.\n", argv[1]);
return 1;
}
}
long slotcount, desired;
int
chinumfunc(struct inodesc *idesc)
{
struct direct *dirp = idesc->id_dirp;
if (slotcount++ == desired) {
dirp->d_ino = idesc->id_parent;
return STOP|ALTERED|FOUND;
}
return KEEPON;
}
CMDFUNCSTART(chinum)
{
char *cp;
ino_t inum;
struct inodesc idesc;
slotcount = 0;
if (!checkactivedir())
return 1;
GETINUM(2,inum);
desired = strtol(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0' || desired < 0) {
printf("invalid slot number `%s'\n", argv[1]);
return 1;
}
idesc.id_number = curinum;
idesc.id_func = chinumfunc;
idesc.id_fix = IGNORE;
idesc.id_type = DATA;
idesc.id_parent = inum; /* XXX convenient hiding place */
if (ckinode(curinode, &idesc) & FOUND)
return 0;
else {
warnx("no %sth slot in current directory", argv[1]);
return 1;
}
}
int
chnamefunc(struct inodesc *idesc)
{
struct direct *dirp = idesc->id_dirp;
struct direct testdir;
if (slotcount++ == desired) {
/* will name fit? */
testdir.d_namlen = strlen(idesc->id_name);
if (DIRSIZ(NEWDIRFMT, &testdir) <= dirp->d_reclen) {
dirp->d_namlen = testdir.d_namlen;
strcpy(dirp->d_name, idesc->id_name);
return STOP|ALTERED|FOUND;
} else
return STOP|FOUND; /* won't fit, so give up */
}
return KEEPON;
}
CMDFUNCSTART(chname)
{
int rval;
char *cp;
struct inodesc idesc;
slotcount = 0;
if (!checkactivedir())
return 1;
desired = strtoul(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0') {
printf("invalid slot number `%s'\n", argv[1]);
return 1;
}
idesc.id_number = curinum;
idesc.id_func = chnamefunc;
idesc.id_fix = IGNORE;
idesc.id_type = DATA;
idesc.id_name = argv[2];
rval = ckinode(curinode, &idesc);
if ((rval & (FOUND|ALTERED)) == (FOUND|ALTERED))
return 0;
else if (rval & FOUND) {
warnx("new name `%s' does not fit in slot %s\n", argv[2], argv[1]);
return 1;
} else {
warnx("no %sth slot in current directory", argv[1]);
return 1;
}
}
struct typemap {
const char *typename;
int typebits;
} typenamemap[] = {
{"file", IFREG},
{"dir", IFDIR},
{"socket", IFSOCK},
{"fifo", IFIFO},
};
CMDFUNCSTART(newtype)
{
int type;
struct typemap *tp;
if (!checkactive())
return 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
type = DIP(curinode, di_mode) & IFMT;
for (tp = typenamemap;
tp < &typenamemap[sizeof(typenamemap)/sizeof(*typenamemap)];
tp++) {
if (!strcmp(argv[1], tp->typename)) {
printf("setting type to %s\n", tp->typename);
type = tp->typebits;
break;
}
}
if (tp == &typenamemap[sizeof(typenamemap)/sizeof(*typenamemap)]) {
warnx("type `%s' not known", argv[1]);
warnx("try one of `file', `dir', `socket', `fifo'");
return 1;
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_mode, DIP(curinode, di_mode) & ~IFMT);
DIP_SET(curinode, di_mode, DIP(curinode, di_mode) | type);
inodirty();
printactive(0);
return 0;
}
CMDFUNCSTART(chlen)
{
int rval = 1;
long len;
char *cp;
if (!checkactive())
return 1;
len = strtol(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0' || len < 0) {
warnx("bad length `%s'", argv[1]);
return 1;
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_size, len);
inodirty();
printactive(0);
return rval;
}
CMDFUNCSTART(chmode)
{
int rval = 1;
long modebits;
char *cp;
if (!checkactive())
return 1;
modebits = strtol(argv[1], &cp, 8);
if (cp == argv[1] || *cp != '\0' || (modebits & ~07777)) {
warnx("bad modebits `%s'", argv[1]);
return 1;
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_mode, DIP(curinode, di_mode) & ~07777);
DIP_SET(curinode, di_mode, DIP(curinode, di_mode) | modebits);
inodirty();
printactive(0);
return rval;
}
CMDFUNCSTART(chaflags)
{
int rval = 1;
u_long flags;
char *cp;
if (!checkactive())
return 1;
flags = strtoul(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0' ) {
warnx("bad flags `%s'", argv[1]);
return 1;
}
if (flags > UINT_MAX) {
warnx("flags set beyond 32-bit range of field (%lx)\n", flags);
return(1);
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_flags, flags);
inodirty();
printactive(0);
return rval;
}
CMDFUNCSTART(chgen)
{
int rval = 1;
long gen;
char *cp;
if (!checkactive())
return 1;
gen = strtol(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0' ) {
warnx("bad gen `%s'", argv[1]);
return 1;
}
if (gen > INT_MAX || gen < INT_MIN) {
warnx("gen set beyond 32-bit range of field (%lx)\n", gen);
return(1);
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_gen, gen);
inodirty();
printactive(0);
return rval;
}
CMDFUNCSTART(linkcount)
{
int rval = 1;
int lcnt;
char *cp;
if (!checkactive())
return 1;
lcnt = strtol(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0' ) {
warnx("bad link count `%s'", argv[1]);
return 1;
}
if (lcnt > USHRT_MAX || lcnt < 0) {
warnx("max link count is %d\n", USHRT_MAX);
return 1;
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_nlink, lcnt);
inodirty();
printactive(0);
return rval;
}
CMDFUNCSTART(chowner)
{
int rval = 1;
unsigned long uid;
char *cp;
struct passwd *pwd;
if (!checkactive())
return 1;
uid = strtoul(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0' ) {
/* try looking up name */
if ((pwd = getpwnam(argv[1]))) {
uid = pwd->pw_uid;
} else {
warnx("bad uid `%s'", argv[1]);
return 1;
}
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_uid, uid);
inodirty();
printactive(0);
return rval;
}
CMDFUNCSTART(chgroup)
{
int rval = 1;
unsigned long gid;
char *cp;
struct group *grp;
if (!checkactive())
return 1;
gid = strtoul(argv[1], &cp, 0);
if (cp == argv[1] || *cp != '\0' ) {
if ((grp = getgrnam(argv[1]))) {
gid = grp->gr_gid;
} else {
warnx("bad gid `%s'", argv[1]);
return 1;
}
}
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_gid, gid);
inodirty();
printactive(0);
return rval;
}
int
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
dotime(char *name, time_t *secp, int32_t *nsecp)
{
char *p, *val;
struct tm t;
int32_t nsec;
p = strchr(name, '.');
if (p) {
*p = '\0';
nsec = strtoul(++p, &val, 0);
if (val == p || *val != '\0' || nsec >= 1000000000 || nsec < 0) {
warnx("invalid nanoseconds");
goto badformat;
}
} else
nsec = 0;
if (strlen(name) != 14) {
badformat:
warnx("date format: YYYYMMDDHHMMSS[.nsec]");
return 1;
}
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
*nsecp = nsec;
for (p = name; *p; p++)
if (*p < '0' || *p > '9')
goto badformat;
p = name;
#define VAL() ((*p++) - '0')
t.tm_year = VAL();
t.tm_year = VAL() + t.tm_year * 10;
t.tm_year = VAL() + t.tm_year * 10;
t.tm_year = VAL() + t.tm_year * 10 - 1900;
t.tm_mon = VAL();
t.tm_mon = VAL() + t.tm_mon * 10 - 1;
t.tm_mday = VAL();
t.tm_mday = VAL() + t.tm_mday * 10;
t.tm_hour = VAL();
t.tm_hour = VAL() + t.tm_hour * 10;
t.tm_min = VAL();
t.tm_min = VAL() + t.tm_min * 10;
t.tm_sec = VAL();
t.tm_sec = VAL() + t.tm_sec * 10;
t.tm_isdst = -1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
*secp = mktime(&t);
if (*secp == -1) {
warnx("date/time out of range");
return 1;
}
return 0;
}
CMDFUNCSTART(chbtime)
{
time_t secs;
int32_t nsecs;
if (dotime(argv[1], &secs, &nsecs))
return 1;
if (sblock.fs_magic == FS_UFS1_MAGIC)
return 1;
curinode->dp2.di_birthtime = _time_to_time64(secs);
curinode->dp2.di_birthnsec = nsecs;
inodirty();
printactive(0);
return 0;
}
CMDFUNCSTART(chmtime)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
time_t secs;
int32_t nsecs;
if (dotime(argv[1], &secs, &nsecs))
return 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (sblock.fs_magic == FS_UFS1_MAGIC)
curinode->dp1.di_mtime = _time_to_time32(secs);
else
curinode->dp2.di_mtime = _time_to_time64(secs);
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_mtimensec, nsecs);
inodirty();
printactive(0);
return 0;
}
CMDFUNCSTART(chatime)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
time_t secs;
int32_t nsecs;
if (dotime(argv[1], &secs, &nsecs))
return 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (sblock.fs_magic == FS_UFS1_MAGIC)
curinode->dp1.di_atime = _time_to_time32(secs);
else
curinode->dp2.di_atime = _time_to_time64(secs);
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_atimensec, nsecs);
inodirty();
printactive(0);
return 0;
}
CMDFUNCSTART(chctime)
{
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
time_t secs;
int32_t nsecs;
if (dotime(argv[1], &secs, &nsecs))
return 1;
This commit adds basic support for the UFS2 filesystem. The UFS2 filesystem expands the inode to 256 bytes to make space for 64-bit block pointers. It also adds a file-creation time field, an ability to use jumbo blocks per inode to allow extent like pointer density, and space for extended attributes (up to twice the filesystem block size worth of attributes, e.g., on a 16K filesystem, there is space for 32K of attributes). UFS2 fully supports and runs existing UFS1 filesystems. New filesystems built using newfs can be built in either UFS1 or UFS2 format using the -O option. In this commit UFS1 is the default format, so if you want to build UFS2 format filesystems, you must specify -O 2. This default will be changed to UFS2 when UFS2 proves itself to be stable. In this commit the boot code for reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c) as there is insufficient space in the boot block. Once the size of the boot block is increased, this code can be defined. Things to note: the definition of SBSIZE has changed to SBLOCKSIZE. The header file <ufs/ufs/dinode.h> must be included before <ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and ufs_lbn_t. Still TODO: Verify that the first level bootstraps work for all the architectures. Convert the utility ffsinfo to understand UFS2 and test growfs. Add support for the extended attribute storage. Update soft updates to ensure integrity of extended attribute storage. Switch the current extended attribute interfaces to use the extended attribute storage. Add the extent like functionality (framework is there, but is currently never used). Sponsored by: DARPA & NAI Labs. Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00
if (sblock.fs_magic == FS_UFS1_MAGIC)
curinode->dp1.di_ctime = _time_to_time32(secs);
else
curinode->dp2.di_ctime = _time_to_time64(secs);
2004-10-09 15:56:34 +00:00
DIP_SET(curinode, di_ctimensec, nsecs);
inodirty();
printactive(0);
return 0;
}