freebsd-nq/sys/dev/ixl/if_ixl.c

1713 lines
47 KiB
C
Raw Normal View History

/******************************************************************************
Copyright (c) 2013-2018, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
/*$FreeBSD$*/
#include "ixl.h"
#include "ixl_pf.h"
#ifdef IXL_IW
#include "ixl_iw.h"
#include "ixl_iw_int.h"
#endif
#ifdef PCI_IOV
#include "ixl_pf_iov.h"
#endif
/*********************************************************************
* Driver version
*********************************************************************/
#define IXL_DRIVER_VERSION_MAJOR 2
#define IXL_DRIVER_VERSION_MINOR 0
#define IXL_DRIVER_VERSION_BUILD 0
#define IXL_DRIVER_VERSION_STRING \
__XSTRING(IXL_DRIVER_VERSION_MAJOR) "." \
__XSTRING(IXL_DRIVER_VERSION_MINOR) "." \
__XSTRING(IXL_DRIVER_VERSION_BUILD) "-k"
/*********************************************************************
* PCI Device ID Table
*
* Used by probe to select devices to load on
*
* ( Vendor ID, Device ID, Branding String )
*********************************************************************/
static pci_vendor_info_t ixl_vendor_info_array[] =
{
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_SFP_XL710, "Intel(R) Ethernet Controller X710 for 10GbE SFP+"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_KX_B, "Intel(R) Ethernet Controller XL710 for 40GbE backplane"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_KX_C, "Intel(R) Ethernet Controller X710 for 10GbE backplane"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_A, "Intel(R) Ethernet Controller XL710 for 40GbE QSFP+"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_B, "Intel(R) Ethernet Controller XL710 for 40GbE QSFP+"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_C, "Intel(R) Ethernet Controller X710 for 10GbE QSFP+"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_BASE_T, "Intel(R) Ethernet Controller X710 for 10GBASE-T"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_BASE_T4, "Intel(R) Ethernet Controller X710/X557-AT 10GBASE-T"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_KX_X722, "Intel(R) Ethernet Connection X722 for 10GbE backplane"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_QSFP_X722, "Intel(R) Ethernet Connection X722 for 10GbE QSFP+"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_SFP_X722, "Intel(R) Ethernet Connection X722 for 10GbE SFP+"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_1G_BASE_T_X722, "Intel(R) Ethernet Connection X722 for 1GbE"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_10G_BASE_T_X722, "Intel(R) Ethernet Connection X722 for 10GBASE-T"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_SFP_I_X722, "Intel(R) Ethernet Connection X722 for 10GbE SFP+"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_25G_B, "Intel(R) Ethernet Controller XXV710 for 25GbE backplane"),
PVIDV(I40E_INTEL_VENDOR_ID, I40E_DEV_ID_25G_SFP28, "Intel(R) Ethernet Controller XXV710 for 25GbE SFP28"),
/* required last entry */
PVID_END
};
/*********************************************************************
* Function prototypes
*********************************************************************/
/*** IFLIB interface ***/
static void *ixl_register(device_t dev);
static int ixl_if_attach_pre(if_ctx_t ctx);
static int ixl_if_attach_post(if_ctx_t ctx);
static int ixl_if_detach(if_ctx_t ctx);
static int ixl_if_shutdown(if_ctx_t ctx);
static int ixl_if_suspend(if_ctx_t ctx);
static int ixl_if_resume(if_ctx_t ctx);
static int ixl_if_msix_intr_assign(if_ctx_t ctx, int msix);
static void ixl_if_enable_intr(if_ctx_t ctx);
static void ixl_if_disable_intr(if_ctx_t ctx);
static int ixl_if_rx_queue_intr_enable(if_ctx_t ctx, uint16_t rxqid);
static int ixl_if_tx_queue_intr_enable(if_ctx_t ctx, uint16_t txqid);
static int ixl_if_tx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs, int ntxqs, int ntxqsets);
static int ixl_if_rx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs, int nqs, int nqsets);
static void ixl_if_queues_free(if_ctx_t ctx);
static void ixl_if_update_admin_status(if_ctx_t ctx);
static void ixl_if_multi_set(if_ctx_t ctx);
static int ixl_if_mtu_set(if_ctx_t ctx, uint32_t mtu);
static void ixl_if_media_status(if_ctx_t ctx, struct ifmediareq *ifmr);
static int ixl_if_media_change(if_ctx_t ctx);
static int ixl_if_promisc_set(if_ctx_t ctx, int flags);
static void ixl_if_timer(if_ctx_t ctx, uint16_t qid);
static void ixl_if_vlan_register(if_ctx_t ctx, u16 vtag);
static void ixl_if_vlan_unregister(if_ctx_t ctx, u16 vtag);
static uint64_t ixl_if_get_counter(if_ctx_t ctx, ift_counter cnt);
static void ixl_if_vflr_handle(if_ctx_t ctx);
// static void ixl_if_link_intr_enable(if_ctx_t ctx);
static int ixl_if_i2c_req(if_ctx_t ctx, struct ifi2creq *req);
static int ixl_if_priv_ioctl(if_ctx_t ctx, u_long command, caddr_t data);
/*** Other ***/
static int ixl_mc_filter_apply(void *arg, struct ifmultiaddr *ifma, int);
static void ixl_save_pf_tunables(struct ixl_pf *);
static int ixl_allocate_pci_resources(struct ixl_pf *);
/*********************************************************************
* FreeBSD Device Interface Entry Points
*********************************************************************/
static device_method_t ixl_methods[] = {
/* Device interface */
DEVMETHOD(device_register, ixl_register),
DEVMETHOD(device_probe, iflib_device_probe),
DEVMETHOD(device_attach, iflib_device_attach),
DEVMETHOD(device_detach, iflib_device_detach),
DEVMETHOD(device_shutdown, iflib_device_shutdown),
#ifdef PCI_IOV
DEVMETHOD(pci_iov_init, ixl_iov_init),
DEVMETHOD(pci_iov_uninit, ixl_iov_uninit),
DEVMETHOD(pci_iov_add_vf, ixl_add_vf),
#endif
DEVMETHOD_END
};
static driver_t ixl_driver = {
"ixl", ixl_methods, sizeof(struct ixl_pf),
};
devclass_t ixl_devclass;
DRIVER_MODULE(ixl, pci, ixl_driver, ixl_devclass, 0, 0);
MODULE_VERSION(ixl, 3);
MODULE_DEPEND(ixl, pci, 1, 1, 1);
MODULE_DEPEND(ixl, ether, 1, 1, 1);
MODULE_DEPEND(ixl, iflib, 1, 1, 1);
static device_method_t ixl_if_methods[] = {
DEVMETHOD(ifdi_attach_pre, ixl_if_attach_pre),
DEVMETHOD(ifdi_attach_post, ixl_if_attach_post),
DEVMETHOD(ifdi_detach, ixl_if_detach),
DEVMETHOD(ifdi_shutdown, ixl_if_shutdown),
DEVMETHOD(ifdi_suspend, ixl_if_suspend),
DEVMETHOD(ifdi_resume, ixl_if_resume),
DEVMETHOD(ifdi_init, ixl_if_init),
DEVMETHOD(ifdi_stop, ixl_if_stop),
DEVMETHOD(ifdi_msix_intr_assign, ixl_if_msix_intr_assign),
DEVMETHOD(ifdi_intr_enable, ixl_if_enable_intr),
DEVMETHOD(ifdi_intr_disable, ixl_if_disable_intr),
//DEVMETHOD(ifdi_link_intr_enable, ixl_if_link_intr_enable),
DEVMETHOD(ifdi_rx_queue_intr_enable, ixl_if_rx_queue_intr_enable),
DEVMETHOD(ifdi_tx_queue_intr_enable, ixl_if_tx_queue_intr_enable),
DEVMETHOD(ifdi_tx_queues_alloc, ixl_if_tx_queues_alloc),
DEVMETHOD(ifdi_rx_queues_alloc, ixl_if_rx_queues_alloc),
DEVMETHOD(ifdi_queues_free, ixl_if_queues_free),
DEVMETHOD(ifdi_update_admin_status, ixl_if_update_admin_status),
DEVMETHOD(ifdi_multi_set, ixl_if_multi_set),
DEVMETHOD(ifdi_mtu_set, ixl_if_mtu_set),
DEVMETHOD(ifdi_media_status, ixl_if_media_status),
DEVMETHOD(ifdi_media_change, ixl_if_media_change),
DEVMETHOD(ifdi_promisc_set, ixl_if_promisc_set),
DEVMETHOD(ifdi_timer, ixl_if_timer),
DEVMETHOD(ifdi_vlan_register, ixl_if_vlan_register),
DEVMETHOD(ifdi_vlan_unregister, ixl_if_vlan_unregister),
DEVMETHOD(ifdi_get_counter, ixl_if_get_counter),
DEVMETHOD(ifdi_vflr_handle, ixl_if_vflr_handle),
DEVMETHOD(ifdi_i2c_req, ixl_if_i2c_req),
DEVMETHOD(ifdi_priv_ioctl, ixl_if_priv_ioctl),
// ifdi_led_func
// ifdi_debug
DEVMETHOD_END
};
static driver_t ixl_if_driver = {
"ixl_if", ixl_if_methods, sizeof(struct ixl_pf)
};
/*
** TUNEABLE PARAMETERS:
*/
static SYSCTL_NODE(_hw, OID_AUTO, ixl, CTLFLAG_RD, 0,
"IXL driver parameters");
/*
* Leave this on unless you need to send flow control
* frames (or other control frames) from software
*/
static int ixl_enable_tx_fc_filter = 1;
TUNABLE_INT("hw.ixl.enable_tx_fc_filter",
&ixl_enable_tx_fc_filter);
SYSCTL_INT(_hw_ixl, OID_AUTO, enable_tx_fc_filter, CTLFLAG_RDTUN,
&ixl_enable_tx_fc_filter, 0,
"Filter out packets with Ethertype 0x8808 from being sent out by non-HW sources");
static int ixl_i2c_access_method = 0;
TUNABLE_INT("hw.ixl.i2c_access_method",
&ixl_i2c_access_method);
SYSCTL_INT(_hw_ixl, OID_AUTO, i2c_access_method, CTLFLAG_RDTUN,
&ixl_i2c_access_method, 0,
IXL_SYSCTL_HELP_I2C_METHOD);
/*
* Different method for processing TX descriptor
* completion.
*/
static int ixl_enable_head_writeback = 1;
TUNABLE_INT("hw.ixl.enable_head_writeback",
&ixl_enable_head_writeback);
SYSCTL_INT(_hw_ixl, OID_AUTO, enable_head_writeback, CTLFLAG_RDTUN,
&ixl_enable_head_writeback, 0,
"For detecting last completed TX descriptor by hardware, use value written by HW instead of checking descriptors");
static int ixl_core_debug_mask = 0;
TUNABLE_INT("hw.ixl.core_debug_mask",
&ixl_core_debug_mask);
SYSCTL_INT(_hw_ixl, OID_AUTO, core_debug_mask, CTLFLAG_RDTUN,
&ixl_core_debug_mask, 0,
"Display debug statements that are printed in non-shared code");
static int ixl_shared_debug_mask = 0;
TUNABLE_INT("hw.ixl.shared_debug_mask",
&ixl_shared_debug_mask);
SYSCTL_INT(_hw_ixl, OID_AUTO, shared_debug_mask, CTLFLAG_RDTUN,
&ixl_shared_debug_mask, 0,
"Display debug statements that are printed in shared code");
#if 0
/*
** Controls for Interrupt Throttling
** - true/false for dynamic adjustment
** - default values for static ITR
*/
static int ixl_dynamic_rx_itr = 0;
TUNABLE_INT("hw.ixl.dynamic_rx_itr", &ixl_dynamic_rx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, dynamic_rx_itr, CTLFLAG_RDTUN,
&ixl_dynamic_rx_itr, 0, "Dynamic RX Interrupt Rate");
static int ixl_dynamic_tx_itr = 0;
TUNABLE_INT("hw.ixl.dynamic_tx_itr", &ixl_dynamic_tx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, dynamic_tx_itr, CTLFLAG_RDTUN,
&ixl_dynamic_tx_itr, 0, "Dynamic TX Interrupt Rate");
#endif
static int ixl_rx_itr = IXL_ITR_8K;
TUNABLE_INT("hw.ixl.rx_itr", &ixl_rx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, rx_itr, CTLFLAG_RDTUN,
&ixl_rx_itr, 0, "RX Interrupt Rate");
static int ixl_tx_itr = IXL_ITR_4K;
TUNABLE_INT("hw.ixl.tx_itr", &ixl_tx_itr);
SYSCTL_INT(_hw_ixl, OID_AUTO, tx_itr, CTLFLAG_RDTUN,
&ixl_tx_itr, 0, "TX Interrupt Rate");
#ifdef IXL_IW
int ixl_enable_iwarp = 0;
TUNABLE_INT("hw.ixl.enable_iwarp", &ixl_enable_iwarp);
SYSCTL_INT(_hw_ixl, OID_AUTO, enable_iwarp, CTLFLAG_RDTUN,
&ixl_enable_iwarp, 0, "iWARP enabled");
#if __FreeBSD_version < 1100000
int ixl_limit_iwarp_msix = 1;
#else
int ixl_limit_iwarp_msix = IXL_IW_MAX_MSIX;
#endif
TUNABLE_INT("hw.ixl.limit_iwarp_msix", &ixl_limit_iwarp_msix);
SYSCTL_INT(_hw_ixl, OID_AUTO, limit_iwarp_msix, CTLFLAG_RDTUN,
&ixl_limit_iwarp_msix, 0, "Limit MSIX vectors assigned to iWARP");
#endif
extern struct if_txrx ixl_txrx_hwb;
extern struct if_txrx ixl_txrx_dwb;
static struct if_shared_ctx ixl_sctx_init = {
.isc_magic = IFLIB_MAGIC,
.isc_q_align = PAGE_SIZE,
Assorted TSO fixes for em(4)/iflib(9) and dead code removal: - Ever since the workaround for the silicon bug of TSO4 causing MAC hangs was committed in r295133, CSUM_TSO always got disabled unconditionally by em(4) on the first invocation of em_init_locked(). However, even with that problem fixed, it turned out that for at least e. g. 82579 not all necessary TSO workarounds are in place, still causing MAC hangs even at Gigabit speed. Thus, for stable/11, TSO usage was deliberately disabled in r323292 (r323293 for stable/10) for the EM-class by default, allowing users to turn it on if it happens to work with their particular EM MAC in a Gigabit-only environment. In head, the TSO workaround for speeds other than Gigabit was lost with the conversion to iflib(9) in r311849 (possibly along with another one or two TSO workarounds). Yet at the same time, for EM-class MACs TSO4 got enabled by default again, causing device hangs. Therefore, change the default for this hardware class back to have TSO4 off, allowing users to turn it on manually if it happens to work in their environment as we do in stable/{10,11}. An alternative would be to add a whitelist of EM-class devices where TSO4 actually is reliable with the workarounds in place, but given that the advantage of TSO at Gigabit speed is rather limited - especially with the overhead of these workarounds -, that's really not worth it. [1] This change includes the addition of an isc_capabilities to struct if_softc_ctx so iflib(9) can also handle interface capabilities that shouldn't be enabled by default which is used to handle the default-off capabilities of e1000 as suggested by shurd@ and moving their handling from em_setup_interface() to em_if_attach_pre() accordingly. - Although 82543 support TSO4 in theory, the former lem(4) didn't have support for TSO4, presumably because TSO4 is even more broken in the LEM-class of MACs than the later EM ones. Still, TSO4 for LEM-class devices was enabled as part of the conversion to iflib(9) in r311849, causing device hangs. So revert back to the pre-r311849 behavior of not supporting TSO4 for LEM-class at all, which includes not creating a TSO DMA tag in iflib(9) for devices not having IFCAP_TSO4 set. [2] - In fact, the FreeBSD TCP stack can handle a TSO size of IP_MAXPACKET (65535) rather than FREEBSD_TSO_SIZE_MAX (65518). However, the TSO DMA must have a maxsize of the maximum TSO size plus the size of a VLAN header for software VLAN tagging. The iflib(9) converted em(4), thus, first correctly sets scctx->isc_tx_tso_size_max to EM_TSO_SIZE in em_if_attach_pre(), but later on overrides it with IP_MAXPACKET in em_setup_interface() (apparently, left-over from pre-iflib(9) times). So remove the later and correct iflib(9) to correctly cap the maximum TSO size reported to the stack at IP_MAXPACKET. While at it, let iflib(9) use if_sethwtsomax*(). This change includes the addition of isc_tso_max{seg,}size DMA engine constraints for the TSO DMA tag to struct if_shared_ctx and letting iflib_txsd_alloc() automatically adjust the maxsize of that tag in case IFCAP_VLAN_MTU is supported as requested by shurd@. - Move the if_setifheaderlen(9) call for adjusting the maximum Ethernet header length from {ixgbe,ixl,ixlv,ixv,em}_setup_interface() to iflib(9) so adjustment is automatically done in case IFCAP_VLAN_MTU is supported. As a consequence, this adjustment now is also done in case of bnxt(4) which missed it previously. - Move the reduction of the maximum TSO segment count reported to the stack by the number of m_pullup(9) calls (which in the worst case, can add another mbuf and, thus, the requirement for another DMA segment each) in the transmit path for performance reasons from em_setup_interface() to iflib_txsd_alloc() as these pull-ups are now done in iflib_parse_header() rather than in the no longer existing em_xmit(). Moreover, this optimization applies to all drivers using iflib(9) and not just em(4); all in-tree iflib(9) consumers still have enough room to handle full size TSO packets. Also, reduce the adjustment to the maximum number of m_pullup(9)'s now performed in iflib_parse_header(). - Prior to the conversion of em(4)/igb(4)/lem(4) and ixl(4) to iflib(9) in r311849 and r335338 respectively, these drivers didn't enable IFCAP_VLAN_HWFILTER by default due to VLAN events not being passed through by lagg(4). With iflib(9), IFCAP_VLAN_HWFILTER was turned on by default but also lagg(4) was fixed in that regard in r203548. So just remove the now redundant and defunct IFCAP_VLAN_HWFILTER handling in {em,ixl,ixlv}_setup_interface(). - Nuke other redundant IFCAP_* setting in {em,ixl,ixlv}_setup_interface() which is (more completely) already done in {em,ixl,ixlv}_if_attach_pre() now. - Remove some redundant/dead setting of scctx->isc_tx_csum_flags in em_if_attach_pre(). - Remove some IFCAP_* duplicated either directly or indirectly (e. g. via IFCAP_HWCSUM) in {EM,IGB,IXL}_CAPS. - Don't bother to fiddle with IFCAP_HWSTATS in ixgbe(4)/ixgbev(4) as iflib(9) adds that capability unconditionally. - Remove some unused macros from em(4). - Bump __FreeBSD_version as some of the above changes require the modules of drivers using iflib(9) to be recompiled. Okayed by: sbruno@ at 201806 DevSummit Transport Working Group [1] Reviewed by: sbruno (earlier version), erj PR: 219428 (part of; comment #10) [1], 220997 (part of; comment #3) [2] Differential Revision: https://reviews.freebsd.org/D15720
2018-07-15 19:04:23 +00:00
.isc_tx_maxsize = IXL_TSO_SIZE + sizeof(struct ether_vlan_header),
.isc_tx_maxsegsize = IXL_MAX_DMA_SEG_SIZE,
Assorted TSO fixes for em(4)/iflib(9) and dead code removal: - Ever since the workaround for the silicon bug of TSO4 causing MAC hangs was committed in r295133, CSUM_TSO always got disabled unconditionally by em(4) on the first invocation of em_init_locked(). However, even with that problem fixed, it turned out that for at least e. g. 82579 not all necessary TSO workarounds are in place, still causing MAC hangs even at Gigabit speed. Thus, for stable/11, TSO usage was deliberately disabled in r323292 (r323293 for stable/10) for the EM-class by default, allowing users to turn it on if it happens to work with their particular EM MAC in a Gigabit-only environment. In head, the TSO workaround for speeds other than Gigabit was lost with the conversion to iflib(9) in r311849 (possibly along with another one or two TSO workarounds). Yet at the same time, for EM-class MACs TSO4 got enabled by default again, causing device hangs. Therefore, change the default for this hardware class back to have TSO4 off, allowing users to turn it on manually if it happens to work in their environment as we do in stable/{10,11}. An alternative would be to add a whitelist of EM-class devices where TSO4 actually is reliable with the workarounds in place, but given that the advantage of TSO at Gigabit speed is rather limited - especially with the overhead of these workarounds -, that's really not worth it. [1] This change includes the addition of an isc_capabilities to struct if_softc_ctx so iflib(9) can also handle interface capabilities that shouldn't be enabled by default which is used to handle the default-off capabilities of e1000 as suggested by shurd@ and moving their handling from em_setup_interface() to em_if_attach_pre() accordingly. - Although 82543 support TSO4 in theory, the former lem(4) didn't have support for TSO4, presumably because TSO4 is even more broken in the LEM-class of MACs than the later EM ones. Still, TSO4 for LEM-class devices was enabled as part of the conversion to iflib(9) in r311849, causing device hangs. So revert back to the pre-r311849 behavior of not supporting TSO4 for LEM-class at all, which includes not creating a TSO DMA tag in iflib(9) for devices not having IFCAP_TSO4 set. [2] - In fact, the FreeBSD TCP stack can handle a TSO size of IP_MAXPACKET (65535) rather than FREEBSD_TSO_SIZE_MAX (65518). However, the TSO DMA must have a maxsize of the maximum TSO size plus the size of a VLAN header for software VLAN tagging. The iflib(9) converted em(4), thus, first correctly sets scctx->isc_tx_tso_size_max to EM_TSO_SIZE in em_if_attach_pre(), but later on overrides it with IP_MAXPACKET in em_setup_interface() (apparently, left-over from pre-iflib(9) times). So remove the later and correct iflib(9) to correctly cap the maximum TSO size reported to the stack at IP_MAXPACKET. While at it, let iflib(9) use if_sethwtsomax*(). This change includes the addition of isc_tso_max{seg,}size DMA engine constraints for the TSO DMA tag to struct if_shared_ctx and letting iflib_txsd_alloc() automatically adjust the maxsize of that tag in case IFCAP_VLAN_MTU is supported as requested by shurd@. - Move the if_setifheaderlen(9) call for adjusting the maximum Ethernet header length from {ixgbe,ixl,ixlv,ixv,em}_setup_interface() to iflib(9) so adjustment is automatically done in case IFCAP_VLAN_MTU is supported. As a consequence, this adjustment now is also done in case of bnxt(4) which missed it previously. - Move the reduction of the maximum TSO segment count reported to the stack by the number of m_pullup(9) calls (which in the worst case, can add another mbuf and, thus, the requirement for another DMA segment each) in the transmit path for performance reasons from em_setup_interface() to iflib_txsd_alloc() as these pull-ups are now done in iflib_parse_header() rather than in the no longer existing em_xmit(). Moreover, this optimization applies to all drivers using iflib(9) and not just em(4); all in-tree iflib(9) consumers still have enough room to handle full size TSO packets. Also, reduce the adjustment to the maximum number of m_pullup(9)'s now performed in iflib_parse_header(). - Prior to the conversion of em(4)/igb(4)/lem(4) and ixl(4) to iflib(9) in r311849 and r335338 respectively, these drivers didn't enable IFCAP_VLAN_HWFILTER by default due to VLAN events not being passed through by lagg(4). With iflib(9), IFCAP_VLAN_HWFILTER was turned on by default but also lagg(4) was fixed in that regard in r203548. So just remove the now redundant and defunct IFCAP_VLAN_HWFILTER handling in {em,ixl,ixlv}_setup_interface(). - Nuke other redundant IFCAP_* setting in {em,ixl,ixlv}_setup_interface() which is (more completely) already done in {em,ixl,ixlv}_if_attach_pre() now. - Remove some redundant/dead setting of scctx->isc_tx_csum_flags in em_if_attach_pre(). - Remove some IFCAP_* duplicated either directly or indirectly (e. g. via IFCAP_HWCSUM) in {EM,IGB,IXL}_CAPS. - Don't bother to fiddle with IFCAP_HWSTATS in ixgbe(4)/ixgbev(4) as iflib(9) adds that capability unconditionally. - Remove some unused macros from em(4). - Bump __FreeBSD_version as some of the above changes require the modules of drivers using iflib(9) to be recompiled. Okayed by: sbruno@ at 201806 DevSummit Transport Working Group [1] Reviewed by: sbruno (earlier version), erj PR: 219428 (part of; comment #10) [1], 220997 (part of; comment #3) [2] Differential Revision: https://reviews.freebsd.org/D15720
2018-07-15 19:04:23 +00:00
.isc_tso_maxsize = IXL_TSO_SIZE + sizeof(struct ether_vlan_header),
.isc_tso_maxsegsize = IXL_MAX_DMA_SEG_SIZE,
.isc_rx_maxsize = 16384,
.isc_rx_nsegments = IXL_MAX_RX_SEGS,
.isc_rx_maxsegsize = IXL_MAX_DMA_SEG_SIZE,
.isc_nfl = 1,
.isc_ntxqs = 1,
.isc_nrxqs = 1,
.isc_admin_intrcnt = 1,
.isc_vendor_info = ixl_vendor_info_array,
.isc_driver_version = IXL_DRIVER_VERSION_STRING,
.isc_driver = &ixl_if_driver,
.isc_flags = IFLIB_NEED_SCRATCH | IFLIB_NEED_ZERO_CSUM | IFLIB_ADMIN_ALWAYS_RUN,
.isc_nrxd_min = {IXL_MIN_RING},
.isc_ntxd_min = {IXL_MIN_RING},
.isc_nrxd_max = {IXL_MAX_RING},
.isc_ntxd_max = {IXL_MAX_RING},
.isc_nrxd_default = {IXL_DEFAULT_RING},
.isc_ntxd_default = {IXL_DEFAULT_RING},
};
if_shared_ctx_t ixl_sctx = &ixl_sctx_init;
/*** Functions ***/
static void *
ixl_register(device_t dev)
{
return (ixl_sctx);
}
static int
ixl_allocate_pci_resources(struct ixl_pf *pf)
{
int rid;
struct i40e_hw *hw = &pf->hw;
device_t dev = iflib_get_dev(pf->vsi.ctx);
/* Map BAR0 */
rid = PCIR_BAR(0);
pf->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&rid, RF_ACTIVE);
if (!(pf->pci_mem)) {
device_printf(dev, "Unable to allocate bus resource: PCI memory\n");
return (ENXIO);
}
/* Save off the PCI information */
hw->vendor_id = pci_get_vendor(dev);
hw->device_id = pci_get_device(dev);
hw->revision_id = pci_read_config(dev, PCIR_REVID, 1);
hw->subsystem_vendor_id =
pci_read_config(dev, PCIR_SUBVEND_0, 2);
hw->subsystem_device_id =
pci_read_config(dev, PCIR_SUBDEV_0, 2);
hw->bus.device = pci_get_slot(dev);
hw->bus.func = pci_get_function(dev);
/* Save off register access information */
pf->osdep.mem_bus_space_tag =
rman_get_bustag(pf->pci_mem);
pf->osdep.mem_bus_space_handle =
rman_get_bushandle(pf->pci_mem);
pf->osdep.mem_bus_space_size = rman_get_size(pf->pci_mem);
pf->osdep.flush_reg = I40E_GLGEN_STAT;
pf->osdep.dev = dev;
pf->hw.hw_addr = (u8 *) &pf->osdep.mem_bus_space_handle;
pf->hw.back = &pf->osdep;
return (0);
}
static int
ixl_if_attach_pre(if_ctx_t ctx)
{
device_t dev;
struct ixl_pf *pf;
struct i40e_hw *hw;
struct ixl_vsi *vsi;
if_softc_ctx_t scctx;
struct i40e_filter_control_settings filter;
enum i40e_status_code status;
int error = 0;
INIT_DEBUGOUT("ixl_if_attach_pre: begin");
/* Allocate, clear, and link in our primary soft structure */
dev = iflib_get_dev(ctx);
pf = iflib_get_softc(ctx);
vsi = &pf->vsi;
vsi->back = pf;
pf->dev = dev;
hw = &pf->hw;
/*
** Note this assumes we have a single embedded VSI,
** this could be enhanced later to allocate multiple
*/
//vsi->dev = pf->dev;
vsi->hw = &pf->hw;
vsi->id = 0;
vsi->num_vlans = 0;
vsi->ctx = ctx;
vsi->media = iflib_get_media(ctx);
vsi->shared = scctx = iflib_get_softc_ctx(ctx);
/* Save tunable values */
ixl_save_pf_tunables(pf);
/* Do PCI setup - map BAR0, etc */
if (ixl_allocate_pci_resources(pf)) {
device_printf(dev, "Allocation of PCI resources failed\n");
error = ENXIO;
goto err_pci_res;
}
/* Establish a clean starting point */
i40e_clear_hw(hw);
status = i40e_pf_reset(hw);
if (status) {
device_printf(dev, "PF reset failure %s\n",
i40e_stat_str(hw, status));
error = EIO;
goto err_out;
}
/* Initialize the shared code */
status = i40e_init_shared_code(hw);
if (status) {
device_printf(dev, "Unable to initialize shared code, error %s\n",
i40e_stat_str(hw, status));
error = EIO;
goto err_out;
}
/* Set up the admin queue */
hw->aq.num_arq_entries = IXL_AQ_LEN;
hw->aq.num_asq_entries = IXL_AQ_LEN;
hw->aq.arq_buf_size = IXL_AQ_BUF_SZ;
hw->aq.asq_buf_size = IXL_AQ_BUF_SZ;
status = i40e_init_adminq(hw);
if (status != 0 && status != I40E_ERR_FIRMWARE_API_VERSION) {
device_printf(dev, "Unable to initialize Admin Queue, error %s\n",
i40e_stat_str(hw, status));
ixl: Update to 1.4.12-k. Changes by author: Eric Joyner ixl: Remove substitution of EACCES for EPERM when perrno is set on an nvmupdate command return. Eric Joyner ixl: Print message when hardware sends GRST interrupt. Eric Joyner ixl: Fix kernel panic when driver fails to initialize admin queue. Eric Joyner ixl: Print out messages when a non-handled other interrupt occurs. Eric Joyner ixl: Fix spaces in a couple messages. Eric Joyner ixl: Add lock around nvmupd command entry point and reconvert EPERM errors to EACCES. Anjali Singhai Jain i40e-shared: Make some changes in the nvm read code Shannon Nelson i40e-shared: AQ Add Run PHY Activity struct Shannon Nelson i40e-shared: AQ Add Geneve cloud tunnel type Shannon Nelson i40e-shared: AQ Add external power class to get link status response struct Shannon Nelson i40e-shared: AQ Add shared resource flags for macvlan filters Shannon Nelson i40e-shared: AQ Add set_switch_config Shannon Nelson i40e-shared: AQ Add VXLAN-GPE tunnel type for cloud filter and tunnel commands Shannon Nelson i40e-shared: AQ thermal sensor control struct Shannon Nelson i40e-shared: Bump AQ minor version to 1.5 for FVL5 features Shannon Nelson i40e-shared: add a little more to an NVM update debug message Carolyn Wyborny i40e-shared: Fix for PHY NVM interaction problem Eric Joyner i40e-shared: Add prototypes for private NVM write functions Eric Joyner ixl/ixlv: Remove unused define from ixl.h. Eric Joyner ixl: Add handling of EMP reset for nvm update purposes. Eric Joyner ixl: Move addition of device sysctls to separate function. Eric Joyner ixl: Fix up a couple error messages in ixl_attach(). Eric Joyner ixl: Update the hardware resource allocation debug sysctl. Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:20:36 +00:00
error = EIO;
goto err_out;
}
ixl: Update to 1.4.17-k. Changes: Kiran Patil i40e-shared: APIs to Add/remove port mirroring rules Shannon Nelson i40e-shared: add VEB stat control and remove L2 cloud filter Eric Joyner ixl: Update NVM version information shown. Eric Joyner ixl: Remove empty else block. Eric Joyner ixl: Slightly re-work ixl_init_msix(). Eric Joyner ixl: Remove duplicate queue enablement. Shannon Nelson i40e-shared: implement the API function for aq_set_switch_config Eric Joyner ixl: Update nvm version string shown in sysctl. Eric Joyner ixl/ixlv: Changes to PF/VF minor version checking/handling. Eric Joyner ixlv: Reduce maximum wait time for responses to VF AQ messages. Eric Joyner ixl/ixlv: Edit comments, comment out code, and edit spacing. Eric Joyner ixl: Print log message when SR-IOV init is successful. Eric Joyner ixl: Add Tx Flow Control filter from main PF VSI. Eric Joyner ixlv: Add extra error message when ixlv_get_vf_config times out. Eric Joyner ixl: Assign current MOCS optics the XLPPI media type. Eric Joyner ixl: Remove conditional wait after link status event. Eric Joyner ixl: Add line break and remove extraneous return statement. Eric Joyner ixl: Allow 40G speeds in the advertise_speed sysctl. Eric Joyner ixl: Add "CRC enable" field to link_status sysctl output. Eric Joyner ixl: Move sbuf.h include out of IXL_DEBUG* defines. Eric Joyner ixl: Move remaining debug sysctl funcs to IXL_DEBUG_SYSCTL define. Eric Joyner ixl: Add cases for all remaining media types in shared code to media_status(). Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:21:17 +00:00
ixl_print_nvm_version(pf);
if (status == I40E_ERR_FIRMWARE_API_VERSION) {
device_printf(dev, "The driver for the device stopped "
"because the NVM image is newer than expected.\n");
device_printf(dev, "You must install the most recent version of "
ixl: Update to 1.4.12-k. Changes by author: Eric Joyner ixl: Remove substitution of EACCES for EPERM when perrno is set on an nvmupdate command return. Eric Joyner ixl: Print message when hardware sends GRST interrupt. Eric Joyner ixl: Fix kernel panic when driver fails to initialize admin queue. Eric Joyner ixl: Print out messages when a non-handled other interrupt occurs. Eric Joyner ixl: Fix spaces in a couple messages. Eric Joyner ixl: Add lock around nvmupd command entry point and reconvert EPERM errors to EACCES. Anjali Singhai Jain i40e-shared: Make some changes in the nvm read code Shannon Nelson i40e-shared: AQ Add Run PHY Activity struct Shannon Nelson i40e-shared: AQ Add Geneve cloud tunnel type Shannon Nelson i40e-shared: AQ Add external power class to get link status response struct Shannon Nelson i40e-shared: AQ Add shared resource flags for macvlan filters Shannon Nelson i40e-shared: AQ Add set_switch_config Shannon Nelson i40e-shared: AQ Add VXLAN-GPE tunnel type for cloud filter and tunnel commands Shannon Nelson i40e-shared: AQ thermal sensor control struct Shannon Nelson i40e-shared: Bump AQ minor version to 1.5 for FVL5 features Shannon Nelson i40e-shared: add a little more to an NVM update debug message Carolyn Wyborny i40e-shared: Fix for PHY NVM interaction problem Eric Joyner i40e-shared: Add prototypes for private NVM write functions Eric Joyner ixl/ixlv: Remove unused define from ixl.h. Eric Joyner ixl: Add handling of EMP reset for nvm update purposes. Eric Joyner ixl: Move addition of device sysctls to separate function. Eric Joyner ixl: Fix up a couple error messages in ixl_attach(). Eric Joyner ixl: Update the hardware resource allocation debug sysctl. Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:20:36 +00:00
"the network driver.\n");
error = EIO;
goto err_out;
}
if (hw->aq.api_maj_ver == I40E_FW_API_VERSION_MAJOR &&
hw->aq.api_min_ver > I40E_FW_MINOR_VERSION(hw)) {
device_printf(dev, "The driver for the device detected "
"a newer version of the NVM image than expected.\n");
device_printf(dev, "Please install the most recent version "
"of the network driver.\n");
} else if (hw->aq.api_maj_ver == 1 && hw->aq.api_min_ver < 4) {
device_printf(dev, "The driver for the device detected "
"an older version of the NVM image than expected.\n");
device_printf(dev, "Please update the NVM image.\n");
}
/* Clear PXE mode */
i40e_clear_pxe_mode(hw);
/* Get capabilities from the device */
error = ixl_get_hw_capabilities(pf);
if (error) {
device_printf(dev, "get_hw_capabilities failed: %d\n",
error);
goto err_get_cap;
}
/* Set up host memory cache */
status = i40e_init_lan_hmc(hw, hw->func_caps.num_tx_qp,
hw->func_caps.num_rx_qp, 0, 0);
if (status) {
device_printf(dev, "init_lan_hmc failed: %s\n",
i40e_stat_str(hw, status));
goto err_get_cap;
}
status = i40e_configure_lan_hmc(hw, I40E_HMC_MODEL_DIRECT_ONLY);
if (status) {
device_printf(dev, "configure_lan_hmc failed: %s\n",
i40e_stat_str(hw, status));
goto err_mac_hmc;
}
/* Disable LLDP from the firmware for certain NVM versions */
if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 3)) ||
(pf->hw.aq.fw_maj_ver < 4)) {
i40e_aq_stop_lldp(hw, TRUE, NULL);
pf->state |= IXL_PF_STATE_FW_LLDP_DISABLED;
}
/* Get MAC addresses from hardware */
i40e_get_mac_addr(hw, hw->mac.addr);
error = i40e_validate_mac_addr(hw->mac.addr);
if (error) {
device_printf(dev, "validate_mac_addr failed: %d\n", error);
goto err_mac_hmc;
}
bcopy(hw->mac.addr, hw->mac.perm_addr, ETHER_ADDR_LEN);
iflib_set_mac(ctx, hw->mac.addr);
i40e_get_port_mac_addr(hw, hw->mac.port_addr);
/* Set up the device filtering */
bzero(&filter, sizeof(filter));
filter.enable_ethtype = TRUE;
filter.enable_macvlan = TRUE;
filter.enable_fdir = FALSE;
filter.hash_lut_size = I40E_HASH_LUT_SIZE_512;
if (i40e_set_filter_control(hw, &filter))
device_printf(dev, "i40e_set_filter_control() failed\n");
/* Query device FW LLDP status */
ixl_get_fw_lldp_status(pf);
/* Tell FW to apply DCB config on link up */
i40e_aq_set_dcb_parameters(hw, true, NULL);
/* Fill out iflib parameters */
if (hw->mac.type == I40E_MAC_X722)
scctx->isc_ntxqsets_max = scctx->isc_nrxqsets_max = 128;
else
scctx->isc_ntxqsets_max = scctx->isc_nrxqsets_max = 64;
if (vsi->enable_head_writeback) {
scctx->isc_txqsizes[0] = roundup2(scctx->isc_ntxd[0]
* sizeof(struct i40e_tx_desc) + sizeof(u32), DBA_ALIGN);
scctx->isc_txrx = &ixl_txrx_hwb;
} else {
scctx->isc_txqsizes[0] = roundup2(scctx->isc_ntxd[0]
* sizeof(struct i40e_tx_desc), DBA_ALIGN);
scctx->isc_txrx = &ixl_txrx_dwb;
}
scctx->isc_rxqsizes[0] = roundup2(scctx->isc_nrxd[0]
* sizeof(union i40e_32byte_rx_desc), DBA_ALIGN);
scctx->isc_msix_bar = PCIR_BAR(IXL_MSIX_BAR);
scctx->isc_tx_nsegments = IXL_MAX_TX_SEGS;
scctx->isc_tx_tso_segments_max = IXL_MAX_TSO_SEGS;
scctx->isc_tx_tso_size_max = IXL_TSO_SIZE;
scctx->isc_tx_tso_segsize_max = IXL_MAX_DMA_SEG_SIZE;
scctx->isc_rss_table_size = pf->hw.func_caps.rss_table_size;
scctx->isc_tx_csum_flags = CSUM_OFFLOAD;
Assorted TSO fixes for em(4)/iflib(9) and dead code removal: - Ever since the workaround for the silicon bug of TSO4 causing MAC hangs was committed in r295133, CSUM_TSO always got disabled unconditionally by em(4) on the first invocation of em_init_locked(). However, even with that problem fixed, it turned out that for at least e. g. 82579 not all necessary TSO workarounds are in place, still causing MAC hangs even at Gigabit speed. Thus, for stable/11, TSO usage was deliberately disabled in r323292 (r323293 for stable/10) for the EM-class by default, allowing users to turn it on if it happens to work with their particular EM MAC in a Gigabit-only environment. In head, the TSO workaround for speeds other than Gigabit was lost with the conversion to iflib(9) in r311849 (possibly along with another one or two TSO workarounds). Yet at the same time, for EM-class MACs TSO4 got enabled by default again, causing device hangs. Therefore, change the default for this hardware class back to have TSO4 off, allowing users to turn it on manually if it happens to work in their environment as we do in stable/{10,11}. An alternative would be to add a whitelist of EM-class devices where TSO4 actually is reliable with the workarounds in place, but given that the advantage of TSO at Gigabit speed is rather limited - especially with the overhead of these workarounds -, that's really not worth it. [1] This change includes the addition of an isc_capabilities to struct if_softc_ctx so iflib(9) can also handle interface capabilities that shouldn't be enabled by default which is used to handle the default-off capabilities of e1000 as suggested by shurd@ and moving their handling from em_setup_interface() to em_if_attach_pre() accordingly. - Although 82543 support TSO4 in theory, the former lem(4) didn't have support for TSO4, presumably because TSO4 is even more broken in the LEM-class of MACs than the later EM ones. Still, TSO4 for LEM-class devices was enabled as part of the conversion to iflib(9) in r311849, causing device hangs. So revert back to the pre-r311849 behavior of not supporting TSO4 for LEM-class at all, which includes not creating a TSO DMA tag in iflib(9) for devices not having IFCAP_TSO4 set. [2] - In fact, the FreeBSD TCP stack can handle a TSO size of IP_MAXPACKET (65535) rather than FREEBSD_TSO_SIZE_MAX (65518). However, the TSO DMA must have a maxsize of the maximum TSO size plus the size of a VLAN header for software VLAN tagging. The iflib(9) converted em(4), thus, first correctly sets scctx->isc_tx_tso_size_max to EM_TSO_SIZE in em_if_attach_pre(), but later on overrides it with IP_MAXPACKET in em_setup_interface() (apparently, left-over from pre-iflib(9) times). So remove the later and correct iflib(9) to correctly cap the maximum TSO size reported to the stack at IP_MAXPACKET. While at it, let iflib(9) use if_sethwtsomax*(). This change includes the addition of isc_tso_max{seg,}size DMA engine constraints for the TSO DMA tag to struct if_shared_ctx and letting iflib_txsd_alloc() automatically adjust the maxsize of that tag in case IFCAP_VLAN_MTU is supported as requested by shurd@. - Move the if_setifheaderlen(9) call for adjusting the maximum Ethernet header length from {ixgbe,ixl,ixlv,ixv,em}_setup_interface() to iflib(9) so adjustment is automatically done in case IFCAP_VLAN_MTU is supported. As a consequence, this adjustment now is also done in case of bnxt(4) which missed it previously. - Move the reduction of the maximum TSO segment count reported to the stack by the number of m_pullup(9) calls (which in the worst case, can add another mbuf and, thus, the requirement for another DMA segment each) in the transmit path for performance reasons from em_setup_interface() to iflib_txsd_alloc() as these pull-ups are now done in iflib_parse_header() rather than in the no longer existing em_xmit(). Moreover, this optimization applies to all drivers using iflib(9) and not just em(4); all in-tree iflib(9) consumers still have enough room to handle full size TSO packets. Also, reduce the adjustment to the maximum number of m_pullup(9)'s now performed in iflib_parse_header(). - Prior to the conversion of em(4)/igb(4)/lem(4) and ixl(4) to iflib(9) in r311849 and r335338 respectively, these drivers didn't enable IFCAP_VLAN_HWFILTER by default due to VLAN events not being passed through by lagg(4). With iflib(9), IFCAP_VLAN_HWFILTER was turned on by default but also lagg(4) was fixed in that regard in r203548. So just remove the now redundant and defunct IFCAP_VLAN_HWFILTER handling in {em,ixl,ixlv}_setup_interface(). - Nuke other redundant IFCAP_* setting in {em,ixl,ixlv}_setup_interface() which is (more completely) already done in {em,ixl,ixlv}_if_attach_pre() now. - Remove some redundant/dead setting of scctx->isc_tx_csum_flags in em_if_attach_pre(). - Remove some IFCAP_* duplicated either directly or indirectly (e. g. via IFCAP_HWCSUM) in {EM,IGB,IXL}_CAPS. - Don't bother to fiddle with IFCAP_HWSTATS in ixgbe(4)/ixgbev(4) as iflib(9) adds that capability unconditionally. - Remove some unused macros from em(4). - Bump __FreeBSD_version as some of the above changes require the modules of drivers using iflib(9) to be recompiled. Okayed by: sbruno@ at 201806 DevSummit Transport Working Group [1] Reviewed by: sbruno (earlier version), erj PR: 219428 (part of; comment #10) [1], 220997 (part of; comment #3) [2] Differential Revision: https://reviews.freebsd.org/D15720
2018-07-15 19:04:23 +00:00
scctx->isc_capabilities = scctx->isc_capenable = IXL_CAPS;
INIT_DEBUGOUT("ixl_if_attach_pre: end");
return (0);
err_mac_hmc:
i40e_shutdown_lan_hmc(hw);
err_get_cap:
i40e_shutdown_adminq(hw);
err_out:
ixl_free_pci_resources(pf);
err_pci_res:
return (error);
}
static int
ixl_if_attach_post(if_ctx_t ctx)
{
device_t dev;
struct ixl_pf *pf;
struct i40e_hw *hw;
struct ixl_vsi *vsi;
int error = 0;
enum i40e_status_code status;
INIT_DEBUGOUT("ixl_if_attach_post: begin");
dev = iflib_get_dev(ctx);
pf = iflib_get_softc(ctx);
vsi = &pf->vsi;
vsi->ifp = iflib_get_ifp(ctx);
hw = &pf->hw;
ixl: Update to 1.4.7-k. Changes by author: Helin Zhang i40e_shared: Fix compilation error - pointer-arith Paul M Stillwell Jr i40e-shared: Replace sprintf with i40e_debug Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement Jesse Brandeburg i40e-shared: remove useless assignments Anjali Singhai Jain i40e-shared: Add a workaround to drop all flow control frames Anjali Singhai Jain i40e-shared: Add new response struct from FW for AQ command i40e_aqc_lldp_set_local_mib Anjali Singhai Jain i40e-shared: Acquire NVM, before issuing an AQ read nvm command Eric Joyner ixl/ixlv: Remove unused MAX_LOOP define. Eric Joyner ixl: Remove extra aq_get_link_info() call in attach(). Eric Joyner ixl: Modify a couple error messages in attach() to be more informative. Eric Joyner ixl: Add i40e_get_link_status() call to init_locked(). Eric Joyner ixl: Move callout_stop() to earlier in ixl_stop(). Eric Joyner ixl: Add extra comments around link ITR code. Eric Joyner ixl: Attempt to enhance link event handling. Eric Joyner ixl: Style, spacing, and comment changes. Eric Joyner ixl: Add I40E_NVM_ACCESS definition. Eric Joyner ixl: Add interface for nvmupdate tool ioctl to driver. Eric Joyner ixl: Don't strip out nvm update support from the driver anymore. Eric Joyner ixl: Interrupts are now allocated/setup and torn down/released on init()/stop(). Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:19:53 +00:00
/* Setup OS network interface / ifnet */
if (ixl_setup_interface(dev, pf)) {
device_printf(dev, "interface setup failed!\n");
error = EIO;
goto err;
}
/* Determine link state */
if (ixl_attach_get_link_status(pf)) {
error = EINVAL;
goto err;
}
error = ixl_switch_config(pf);
if (error) {
device_printf(dev, "Initial ixl_switch_config() failed: %d\n",
error);
goto err;
}
/* Add protocol filters to list */
ixl_init_filters(vsi);
/* Init queue allocation manager */
error = ixl_pf_qmgr_init(&pf->qmgr, hw->func_caps.num_tx_qp);
if (error) {
device_printf(dev, "Failed to init queue manager for PF queues, error %d\n",
error);
goto err;
}
/* reserve a contiguous allocation for the PF's VSI */
error = ixl_pf_qmgr_alloc_contiguous(&pf->qmgr,
max(vsi->num_rx_queues, vsi->num_tx_queues), &pf->qtag);
if (error) {
device_printf(dev, "Failed to reserve queues for PF LAN VSI, error %d\n",
error);
goto err;
}
device_printf(dev, "Allocating %d queues for PF LAN VSI; %d queues active\n",
pf->qtag.num_allocated, pf->qtag.num_active);
ixl: Update to 1.4.7-k. Changes by author: Helin Zhang i40e_shared: Fix compilation error - pointer-arith Paul M Stillwell Jr i40e-shared: Replace sprintf with i40e_debug Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement Jesse Brandeburg i40e-shared: remove useless assignments Anjali Singhai Jain i40e-shared: Add a workaround to drop all flow control frames Anjali Singhai Jain i40e-shared: Add new response struct from FW for AQ command i40e_aqc_lldp_set_local_mib Anjali Singhai Jain i40e-shared: Acquire NVM, before issuing an AQ read nvm command Eric Joyner ixl/ixlv: Remove unused MAX_LOOP define. Eric Joyner ixl: Remove extra aq_get_link_info() call in attach(). Eric Joyner ixl: Modify a couple error messages in attach() to be more informative. Eric Joyner ixl: Add i40e_get_link_status() call to init_locked(). Eric Joyner ixl: Move callout_stop() to earlier in ixl_stop(). Eric Joyner ixl: Add extra comments around link ITR code. Eric Joyner ixl: Attempt to enhance link event handling. Eric Joyner ixl: Style, spacing, and comment changes. Eric Joyner ixl: Add I40E_NVM_ACCESS definition. Eric Joyner ixl: Add interface for nvmupdate tool ioctl to driver. Eric Joyner ixl: Don't strip out nvm update support from the driver anymore. Eric Joyner ixl: Interrupts are now allocated/setup and torn down/released on init()/stop(). Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:19:53 +00:00
/* Limit PHY interrupts to link, autoneg, and modules failure */
status = i40e_aq_set_phy_int_mask(hw, IXL_DEFAULT_PHY_INT_MASK,
ixl: Update to 1.4.7-k. Changes by author: Helin Zhang i40e_shared: Fix compilation error - pointer-arith Paul M Stillwell Jr i40e-shared: Replace sprintf with i40e_debug Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement Jesse Brandeburg i40e-shared: remove useless assignments Anjali Singhai Jain i40e-shared: Add a workaround to drop all flow control frames Anjali Singhai Jain i40e-shared: Add new response struct from FW for AQ command i40e_aqc_lldp_set_local_mib Anjali Singhai Jain i40e-shared: Acquire NVM, before issuing an AQ read nvm command Eric Joyner ixl/ixlv: Remove unused MAX_LOOP define. Eric Joyner ixl: Remove extra aq_get_link_info() call in attach(). Eric Joyner ixl: Modify a couple error messages in attach() to be more informative. Eric Joyner ixl: Add i40e_get_link_status() call to init_locked(). Eric Joyner ixl: Move callout_stop() to earlier in ixl_stop(). Eric Joyner ixl: Add extra comments around link ITR code. Eric Joyner ixl: Attempt to enhance link event handling. Eric Joyner ixl: Style, spacing, and comment changes. Eric Joyner ixl: Add I40E_NVM_ACCESS definition. Eric Joyner ixl: Add interface for nvmupdate tool ioctl to driver. Eric Joyner ixl: Don't strip out nvm update support from the driver anymore. Eric Joyner ixl: Interrupts are now allocated/setup and torn down/released on init()/stop(). Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:19:53 +00:00
NULL);
if (status) {
device_printf(dev, "i40e_aq_set_phy_mask() failed: err %s,"
" aq_err %s\n", i40e_stat_str(hw, status),
i40e_aq_str(hw, hw->aq.asq_last_status));
goto err;
ixl: Update to 1.4.7-k. Changes by author: Helin Zhang i40e_shared: Fix compilation error - pointer-arith Paul M Stillwell Jr i40e-shared: Replace sprintf with i40e_debug Anjali Singhai Jain i40e-shared: Fix an accidental error with BIT_ULL replacement Jesse Brandeburg i40e-shared: remove useless assignments Anjali Singhai Jain i40e-shared: Add a workaround to drop all flow control frames Anjali Singhai Jain i40e-shared: Add new response struct from FW for AQ command i40e_aqc_lldp_set_local_mib Anjali Singhai Jain i40e-shared: Acquire NVM, before issuing an AQ read nvm command Eric Joyner ixl/ixlv: Remove unused MAX_LOOP define. Eric Joyner ixl: Remove extra aq_get_link_info() call in attach(). Eric Joyner ixl: Modify a couple error messages in attach() to be more informative. Eric Joyner ixl: Add i40e_get_link_status() call to init_locked(). Eric Joyner ixl: Move callout_stop() to earlier in ixl_stop(). Eric Joyner ixl: Add extra comments around link ITR code. Eric Joyner ixl: Attempt to enhance link event handling. Eric Joyner ixl: Style, spacing, and comment changes. Eric Joyner ixl: Add I40E_NVM_ACCESS definition. Eric Joyner ixl: Add interface for nvmupdate tool ioctl to driver. Eric Joyner ixl: Don't strip out nvm update support from the driver anymore. Eric Joyner ixl: Interrupts are now allocated/setup and torn down/released on init()/stop(). Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:19:53 +00:00
}
/* Get the bus configuration and set the shared code */
ixl_get_bus_info(pf);
/* Keep admin queue interrupts active while driver is loaded */
if (vsi->shared->isc_intr == IFLIB_INTR_MSIX) {
ixl_configure_intr0_msix(pf);
ixl_enable_intr0(hw);
}
/* Set initial advertised speed sysctl value */
ixl_set_initial_advertised_speeds(pf);
ixl: Update to 1.4.12-k. Changes by author: Eric Joyner ixl: Remove substitution of EACCES for EPERM when perrno is set on an nvmupdate command return. Eric Joyner ixl: Print message when hardware sends GRST interrupt. Eric Joyner ixl: Fix kernel panic when driver fails to initialize admin queue. Eric Joyner ixl: Print out messages when a non-handled other interrupt occurs. Eric Joyner ixl: Fix spaces in a couple messages. Eric Joyner ixl: Add lock around nvmupd command entry point and reconvert EPERM errors to EACCES. Anjali Singhai Jain i40e-shared: Make some changes in the nvm read code Shannon Nelson i40e-shared: AQ Add Run PHY Activity struct Shannon Nelson i40e-shared: AQ Add Geneve cloud tunnel type Shannon Nelson i40e-shared: AQ Add external power class to get link status response struct Shannon Nelson i40e-shared: AQ Add shared resource flags for macvlan filters Shannon Nelson i40e-shared: AQ Add set_switch_config Shannon Nelson i40e-shared: AQ Add VXLAN-GPE tunnel type for cloud filter and tunnel commands Shannon Nelson i40e-shared: AQ thermal sensor control struct Shannon Nelson i40e-shared: Bump AQ minor version to 1.5 for FVL5 features Shannon Nelson i40e-shared: add a little more to an NVM update debug message Carolyn Wyborny i40e-shared: Fix for PHY NVM interaction problem Eric Joyner i40e-shared: Add prototypes for private NVM write functions Eric Joyner ixl/ixlv: Remove unused define from ixl.h. Eric Joyner ixl: Add handling of EMP reset for nvm update purposes. Eric Joyner ixl: Move addition of device sysctls to separate function. Eric Joyner ixl: Fix up a couple error messages in ixl_attach(). Eric Joyner ixl: Update the hardware resource allocation debug sysctl. Differential Revision: https://reviews.freebsd.org/D6211 Reviewed by: sbruno, kmacy, jeffrey.e.pieper@intel.com MFC after: 2 weeks Sponsored by: Intel Corporation
2016-05-12 18:20:36 +00:00
/* Initialize statistics & add sysctls */
ixl_add_device_sysctls(pf);
ixl_pf_reset_stats(pf);
ixl_update_stats_counters(pf);
ixl_add_hw_stats(pf);
hw->phy.get_link_info = true;
i40e_get_link_status(hw, &pf->link_up);
ixl_update_link_status(pf);
#ifdef PCI_IOV
ixl_initialize_sriov(pf);
#endif
#ifdef IXL_IW
if (hw->func_caps.iwarp && ixl_enable_iwarp) {
pf->iw_enabled = (pf->iw_msix > 0) ? true : false;
if (pf->iw_enabled) {
error = ixl_iw_pf_attach(pf);
if (error) {
device_printf(dev,
"interfacing to iwarp driver failed: %d\n",
error);
goto err;
} else
device_printf(dev, "iWARP ready\n");
} else
device_printf(dev,
"iwarp disabled on this device (no msix vectors)\n");
} else {
pf->iw_enabled = false;
device_printf(dev, "The device is not iWARP enabled\n");
}
#endif
INIT_DBG_DEV(dev, "end");
return (0);
err:
INIT_DEBUGOUT("end: error %d", error);
/* ixl_if_detach() is called on error from this */
return (error);
}
static int
ixl_if_detach(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = &pf->hw;
device_t dev = pf->dev;
enum i40e_status_code status;
#if defined(PCI_IOV) || defined(IXL_IW)
int error;
#endif
INIT_DBG_DEV(dev, "begin");
#ifdef IXL_IW
if (ixl_enable_iwarp && pf->iw_enabled) {
error = ixl_iw_pf_detach(pf);
if (error == EBUSY) {
device_printf(dev, "iwarp in use; stop it first.\n");
return (error);
}
}
#endif
#ifdef PCI_IOV
error = pci_iov_detach(dev);
if (error != 0) {
device_printf(dev, "SR-IOV in use; detach first.\n");
return (error);
}
#endif
/* Remove all previously allocated media types */
ifmedia_removeall(vsi->media);
/* Shutdown LAN HMC */
if (hw->hmc.hmc_obj) {
status = i40e_shutdown_lan_hmc(hw);
if (status)
device_printf(dev,
"i40e_shutdown_lan_hmc() failed with status %s\n",
i40e_stat_str(hw, status));
}
/* Shutdown admin queue */
ixl_disable_intr0(hw);
status = i40e_shutdown_adminq(hw);
if (status)
device_printf(dev,
"i40e_shutdown_adminq() failed with status %s\n",
i40e_stat_str(hw, status));
ixl_pf_qmgr_destroy(&pf->qmgr);
ixl_free_pci_resources(pf);
ixl_free_mac_filters(vsi);
INIT_DBG_DEV(dev, "end");
return (0);
}
/* TODO: Do shutdown-specific stuff here */
static int
ixl_if_shutdown(if_ctx_t ctx)
{
int error = 0;
INIT_DEBUGOUT("ixl_if_shutdown: begin");
/* TODO: Call ixl_if_stop()? */
/* TODO: Then setup low power mode */
return (error);
}
static int
ixl_if_suspend(if_ctx_t ctx)
{
int error = 0;
INIT_DEBUGOUT("ixl_if_suspend: begin");
/* TODO: Call ixl_if_stop()? */
/* TODO: Then setup low power mode */
return (error);
}
static int
ixl_if_resume(if_ctx_t ctx)
{
struct ifnet *ifp = iflib_get_ifp(ctx);
INIT_DEBUGOUT("ixl_if_resume: begin");
/* Read & clear wake-up registers */
/* Required after D3->D0 transition */
if (ifp->if_flags & IFF_UP)
ixl_if_init(ctx);
return (0);
}
/* Set Report Status queue fields to 0 */
static void
ixl_init_tx_rsqs(struct ixl_vsi *vsi)
{
if_softc_ctx_t scctx = vsi->shared;
struct ixl_tx_queue *tx_que;
int i, j;
for (i = 0, tx_que = vsi->tx_queues; i < vsi->num_tx_queues; i++, tx_que++) {
struct tx_ring *txr = &tx_que->txr;
txr->tx_rs_cidx = txr->tx_rs_pidx = txr->tx_cidx_processed = 0;
for (j = 0; j < scctx->isc_ntxd[0]; j++)
txr->tx_rsq[j] = QIDX_INVALID;
}
}
static void
ixl_init_tx_cidx(struct ixl_vsi *vsi)
{
struct ixl_tx_queue *tx_que;
int i;
for (i = 0, tx_que = vsi->tx_queues; i < vsi->num_tx_queues; i++, tx_que++) {
struct tx_ring *txr = &tx_que->txr;
txr->tx_cidx_processed = 0;
}
}
void
ixl_if_init(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = &pf->hw;
device_t dev = iflib_get_dev(ctx);
u8 tmpaddr[ETHER_ADDR_LEN];
int ret;
/*
* If the aq is dead here, it probably means something outside of the driver
* did something to the adapter, like a PF reset.
* So rebuild the driver's state here if that occurs.
*/
if (!i40e_check_asq_alive(&pf->hw)) {
device_printf(dev, "Admin Queue is down; resetting...\n");
ixl_teardown_hw_structs(pf);
ixl_reset(pf);
}
/* Get the latest mac address... User might use a LAA */
bcopy(IF_LLADDR(vsi->ifp), tmpaddr, ETH_ALEN);
if (!cmp_etheraddr(hw->mac.addr, tmpaddr) &&
(i40e_validate_mac_addr(tmpaddr) == I40E_SUCCESS)) {
ixl_del_filter(vsi, hw->mac.addr, IXL_VLAN_ANY);
bcopy(tmpaddr, hw->mac.addr, ETH_ALEN);
ret = i40e_aq_mac_address_write(hw,
I40E_AQC_WRITE_TYPE_LAA_ONLY,
hw->mac.addr, NULL);
if (ret) {
device_printf(dev, "LLA address change failed!!\n");
return;
}
ixl_add_filter(vsi, hw->mac.addr, IXL_VLAN_ANY);
}
iflib_set_mac(ctx, hw->mac.addr);
/* Prepare the VSI: rings, hmc contexts, etc... */
if (ixl_initialize_vsi(vsi)) {
device_printf(dev, "initialize vsi failed!!\n");
return;
}
// TODO: Call iflib setup multicast filters here?
// It's called in ixgbe in D5213
ixl_if_multi_set(ctx);
/* Set up RSS */
ixl_config_rss(pf);
/* Set up MSI/X routing and the ITR settings */
if (vsi->shared->isc_intr == IFLIB_INTR_MSIX) {
ixl_configure_queue_intr_msix(pf);
ixl_configure_itr(pf);
} else
ixl_configure_legacy(pf);
if (vsi->enable_head_writeback)
ixl_init_tx_cidx(vsi);
else
ixl_init_tx_rsqs(vsi);
ixl_enable_rings(vsi);
i40e_aq_set_default_vsi(hw, vsi->seid, NULL);
ixl_reconfigure_filters(vsi);
#ifdef IXL_IW
if (ixl_enable_iwarp && pf->iw_enabled) {
ret = ixl_iw_pf_init(pf);
if (ret)
device_printf(dev,
"initialize iwarp failed, code %d\n", ret);
}
#endif
}
void
ixl_if_stop(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
INIT_DEBUGOUT("ixl_if_stop: begin\n");
// TODO: This may need to be reworked
#ifdef IXL_IW
/* Stop iWARP device */
if (ixl_enable_iwarp && pf->iw_enabled)
ixl_iw_pf_stop(pf);
#endif
ixl_disable_rings_intr(vsi);
ixl_disable_rings(vsi);
}
static int
ixl_if_msix_intr_assign(if_ctx_t ctx, int msix)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct ixl_rx_queue *rx_que = vsi->rx_queues;
struct ixl_tx_queue *tx_que = vsi->tx_queues;
int err, i, rid, vector = 0;
char buf[16];
/* Admin Que must use vector 0*/
rid = vector + 1;
err = iflib_irq_alloc_generic(ctx, &vsi->irq, rid, IFLIB_INTR_ADMIN,
ixl_msix_adminq, pf, 0, "aq");
if (err) {
iflib_irq_free(ctx, &vsi->irq);
device_printf(iflib_get_dev(ctx),
"Failed to register Admin que handler");
return (err);
}
// TODO: Re-enable this at some point
// iflib_softirq_alloc_generic(ctx, rid, IFLIB_INTR_IOV, pf, 0, "ixl_iov");
/* Now set up the stations */
for (i = 0, vector = 1; i < vsi->num_rx_queues; i++, vector++, rx_que++) {
rid = vector + 1;
snprintf(buf, sizeof(buf), "rxq%d", i);
err = iflib_irq_alloc_generic(ctx, &rx_que->que_irq, rid,
IFLIB_INTR_RX, ixl_msix_que, rx_que, rx_que->rxr.me, buf);
/* XXX: Does the driver work as expected if there are fewer num_rx_queues than
* what's expected in the iflib context? */
if (err) {
device_printf(iflib_get_dev(ctx),
"Failed to allocate q int %d err: %d", i, err);
vsi->num_rx_queues = i + 1;
goto fail;
}
rx_que->msix = vector;
}
bzero(buf, sizeof(buf));
for (i = 0; i < vsi->num_tx_queues; i++, tx_que++) {
snprintf(buf, sizeof(buf), "txq%d", i);
iflib_softirq_alloc_generic(ctx,
&vsi->rx_queues[i % vsi->num_rx_queues].que_irq,
IFLIB_INTR_TX, tx_que, tx_que->txr.me, buf);
/* TODO: Maybe call a strategy function for this to figure out which
* interrupts to map Tx queues to. I don't know if there's an immediately
* better way than this other than a user-supplied map, though. */
tx_que->msix = (i % vsi->num_rx_queues) + 1;
}
return (0);
fail:
iflib_irq_free(ctx, &vsi->irq);
rx_que = vsi->rx_queues;
for (int i = 0; i < vsi->num_rx_queues; i++, rx_que++)
iflib_irq_free(ctx, &rx_que->que_irq);
return (err);
}
/*
* Enable all interrupts
*
* Called in:
* iflib_init_locked, after ixl_if_init()
*/
static void
ixl_if_enable_intr(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = vsi->hw;
struct ixl_rx_queue *que = vsi->rx_queues;
ixl_enable_intr0(hw);
/* Enable queue interrupts */
for (int i = 0; i < vsi->num_rx_queues; i++, que++)
/* TODO: Queue index parameter is probably wrong */
ixl_enable_queue(hw, que->rxr.me);
}
/*
* Disable queue interrupts
*
* Other interrupt causes need to remain active.
*/
static void
ixl_if_disable_intr(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = vsi->hw;
struct ixl_rx_queue *rx_que = vsi->rx_queues;
if (vsi->shared->isc_intr == IFLIB_INTR_MSIX) {
for (int i = 0; i < vsi->num_rx_queues; i++, rx_que++)
ixl_disable_queue(hw, rx_que->msix - 1);
} else {
// Set PFINT_LNKLST0 FIRSTQ_INDX to 0x7FF
// stops queues from triggering interrupts
wr32(hw, I40E_PFINT_LNKLST0, 0x7FF);
}
}
static int
ixl_if_rx_queue_intr_enable(if_ctx_t ctx, uint16_t rxqid)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = vsi->hw;
struct ixl_rx_queue *rx_que = &vsi->rx_queues[rxqid];
ixl_enable_queue(hw, rx_que->msix - 1);
return (0);
}
static int
ixl_if_tx_queue_intr_enable(if_ctx_t ctx, uint16_t txqid)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = vsi->hw;
struct ixl_tx_queue *tx_que = &vsi->tx_queues[txqid];
ixl_enable_queue(hw, tx_que->msix - 1);
return (0);
}
static int
ixl_if_tx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs, int ntxqs, int ntxqsets)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
if_softc_ctx_t scctx = vsi->shared;
struct ixl_tx_queue *que;
// int i;
int i, j, error = 0;
MPASS(vsi->num_tx_queues > 0);
MPASS(ntxqs == 1);
MPASS(vsi->num_tx_queues == ntxqsets);
/* Allocate queue structure memory */
if (!(vsi->tx_queues =
(struct ixl_tx_queue *) malloc(sizeof(struct ixl_tx_queue) *ntxqsets, M_IXL, M_NOWAIT | M_ZERO))) {
device_printf(iflib_get_dev(ctx), "Unable to allocate TX ring memory\n");
return (ENOMEM);
}
for (i = 0, que = vsi->tx_queues; i < ntxqsets; i++, que++) {
struct tx_ring *txr = &que->txr;
txr->me = i;
que->vsi = vsi;
if (!vsi->enable_head_writeback) {
/* Allocate report status array */
if (!(txr->tx_rsq = malloc(sizeof(qidx_t) * scctx->isc_ntxd[0], M_IXL, M_NOWAIT))) {
device_printf(iflib_get_dev(ctx), "failed to allocate tx_rsq memory\n");
error = ENOMEM;
goto fail;
}
/* Init report status array */
for (j = 0; j < scctx->isc_ntxd[0]; j++)
txr->tx_rsq[j] = QIDX_INVALID;
}
/* get the virtual and physical address of the hardware queues */
txr->tail = I40E_QTX_TAIL(txr->me);
txr->tx_base = (struct i40e_tx_desc *)vaddrs[i * ntxqs];
txr->tx_paddr = paddrs[i * ntxqs];
txr->que = que;
}
return (0);
fail:
ixl_if_queues_free(ctx);
return (error);
}
static int
ixl_if_rx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs, int nrxqs, int nrxqsets)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct ixl_rx_queue *que;
int i, error = 0;
MPASS(vsi->num_rx_queues > 0);
MPASS(nrxqs == 1);
MPASS(vsi->num_rx_queues == nrxqsets);
/* Allocate queue structure memory */
if (!(vsi->rx_queues =
(struct ixl_rx_queue *) malloc(sizeof(struct ixl_rx_queue) *
nrxqsets, M_IXL, M_NOWAIT | M_ZERO))) {
device_printf(iflib_get_dev(ctx), "Unable to allocate RX ring memory\n");
error = ENOMEM;
goto fail;
}
for (i = 0, que = vsi->rx_queues; i < nrxqsets; i++, que++) {
struct rx_ring *rxr = &que->rxr;
rxr->me = i;
que->vsi = vsi;
/* get the virtual and physical address of the hardware queues */
rxr->tail = I40E_QRX_TAIL(rxr->me);
rxr->rx_base = (union i40e_rx_desc *)vaddrs[i * nrxqs];
rxr->rx_paddr = paddrs[i * nrxqs];
rxr->que = que;
}
return (0);
fail:
ixl_if_queues_free(ctx);
return (error);
}
static void
ixl_if_queues_free(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
if (vsi->enable_head_writeback) {
struct ixl_tx_queue *que;
int i = 0;
for (i = 0, que = vsi->tx_queues; i < vsi->num_tx_queues; i++, que++) {
struct tx_ring *txr = &que->txr;
if (txr->tx_rsq != NULL) {
free(txr->tx_rsq, M_IXL);
txr->tx_rsq = NULL;
}
}
}
if (vsi->tx_queues != NULL) {
free(vsi->tx_queues, M_IXL);
vsi->tx_queues = NULL;
}
if (vsi->rx_queues != NULL) {
free(vsi->rx_queues, M_IXL);
vsi->rx_queues = NULL;
}
}
void
ixl_update_link_status(struct ixl_pf *pf)
{
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = &pf->hw;
u64 baudrate;
if (pf->link_up) {
if (vsi->link_active == FALSE) {
vsi->link_active = TRUE;
baudrate = ixl_max_aq_speed_to_value(hw->phy.link_info.link_speed);
iflib_link_state_change(vsi->ctx, LINK_STATE_UP, baudrate);
ixl_link_up_msg(pf);
#ifdef PCI_IOV
ixl_broadcast_link_state(pf);
#endif
}
} else { /* Link down */
if (vsi->link_active == TRUE) {
vsi->link_active = FALSE;
iflib_link_state_change(vsi->ctx, LINK_STATE_DOWN, 0);
#ifdef PCI_IOV
ixl_broadcast_link_state(pf);
#endif
}
}
}
static int
ixl_process_adminq(struct ixl_pf *pf, u16 *pending)
{
enum i40e_status_code status = I40E_SUCCESS;
struct i40e_arq_event_info event;
struct i40e_hw *hw = &pf->hw;
device_t dev = pf->dev;
u16 opcode;
u32 loop = 0, reg;
event.buf_len = IXL_AQ_BUF_SZ;
event.msg_buf = malloc(event.buf_len, M_IXL, M_NOWAIT | M_ZERO);
if (!event.msg_buf) {
device_printf(dev, "%s: Unable to allocate memory for Admin"
" Queue event!\n", __func__);
return (ENOMEM);
}
/* clean and process any events */
do {
status = i40e_clean_arq_element(hw, &event, pending);
if (status)
break;
opcode = LE16_TO_CPU(event.desc.opcode);
ixl_dbg(pf, IXL_DBG_AQ,
"Admin Queue event: %#06x\n", opcode);
switch (opcode) {
case i40e_aqc_opc_get_link_status:
ixl_link_event(pf, &event);
break;
case i40e_aqc_opc_send_msg_to_pf:
#ifdef PCI_IOV
ixl_handle_vf_msg(pf, &event);
#endif
break;
/*
* This should only occur on no-drop queues, which
* aren't currently configured.
*/
case i40e_aqc_opc_event_lan_overflow:
device_printf(dev, "LAN overflow event\n");
break;
default:
break;
}
} while (*pending && (loop++ < IXL_ADM_LIMIT));
free(event.msg_buf, M_IXL);
/* Re-enable admin queue interrupt cause */
reg = rd32(hw, I40E_PFINT_ICR0_ENA);
reg |= I40E_PFINT_ICR0_ENA_ADMINQ_MASK;
wr32(hw, I40E_PFINT_ICR0_ENA, reg);
return (status);
}
static void
ixl_if_update_admin_status(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct i40e_hw *hw = &pf->hw;
u16 pending;
if (pf->state & IXL_PF_STATE_ADAPTER_RESETTING)
ixl_handle_empr_reset(pf);
if (pf->state & IXL_PF_STATE_MDD_PENDING)
ixl_handle_mdd_event(pf);
#ifdef PCI_IOV
if (pf->state & IXL_PF_STATE_VF_RESET_REQ)
iflib_iov_intr_deferred(ctx);
#endif
ixl_process_adminq(pf, &pending);
ixl_update_link_status(pf);
/*
* If there are still messages to process, reschedule ourselves.
* Otherwise, re-enable our interrupt and go to sleep.
*/
if (pending > 0)
iflib_admin_intr_deferred(ctx);
else
ixl_enable_intr0(hw);
}
static void
ixl_if_multi_set(if_ctx_t ctx)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = vsi->hw;
int mcnt = 0, flags;
IOCTL_DEBUGOUT("ixl_if_multi_set: begin");
mcnt = if_multiaddr_count(iflib_get_ifp(ctx), MAX_MULTICAST_ADDR);
/* delete existing MC filters */
ixl_del_multi(vsi);
if (__predict_false(mcnt == MAX_MULTICAST_ADDR)) {
i40e_aq_set_vsi_multicast_promiscuous(hw,
vsi->seid, TRUE, NULL);
return;
}
/* (re-)install filters for all mcast addresses */
mcnt = if_multi_apply(iflib_get_ifp(ctx), ixl_mc_filter_apply, vsi);
if (mcnt > 0) {
flags = (IXL_FILTER_ADD | IXL_FILTER_USED | IXL_FILTER_MC);
ixl_add_hw_filters(vsi, flags, mcnt);
}
IOCTL_DEBUGOUT("ixl_if_multi_set: end");
}
static int
ixl_if_mtu_set(if_ctx_t ctx, uint32_t mtu)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
IOCTL_DEBUGOUT("ioctl: SIOCSIFMTU (Set Interface MTU)");
if (mtu > IXL_MAX_FRAME - ETHER_HDR_LEN - ETHER_CRC_LEN -
ETHER_VLAN_ENCAP_LEN)
return (EINVAL);
vsi->shared->isc_max_frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN +
ETHER_VLAN_ENCAP_LEN;
return (0);
}
static void
ixl_if_media_status(if_ctx_t ctx, struct ifmediareq *ifmr)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct i40e_hw *hw = &pf->hw;
INIT_DEBUGOUT("ixl_media_status: begin");
ifmr->ifm_status = IFM_AVALID;
ifmr->ifm_active = IFM_ETHER;
if (!pf->link_up) {
return;
}
ifmr->ifm_status |= IFM_ACTIVE;
/* Hardware is always full-duplex */
ifmr->ifm_active |= IFM_FDX;
switch (hw->phy.link_info.phy_type) {
/* 100 M */
case I40E_PHY_TYPE_100BASE_TX:
ifmr->ifm_active |= IFM_100_TX;
break;
/* 1 G */
case I40E_PHY_TYPE_1000BASE_T:
ifmr->ifm_active |= IFM_1000_T;
break;
case I40E_PHY_TYPE_1000BASE_SX:
ifmr->ifm_active |= IFM_1000_SX;
break;
case I40E_PHY_TYPE_1000BASE_LX:
ifmr->ifm_active |= IFM_1000_LX;
break;
case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
ifmr->ifm_active |= IFM_1000_T;
break;
/* 10 G */
case I40E_PHY_TYPE_10GBASE_SFPP_CU:
ifmr->ifm_active |= IFM_10G_TWINAX;
break;
case I40E_PHY_TYPE_10GBASE_SR:
ifmr->ifm_active |= IFM_10G_SR;
break;
case I40E_PHY_TYPE_10GBASE_LR:
ifmr->ifm_active |= IFM_10G_LR;
break;
case I40E_PHY_TYPE_10GBASE_T:
ifmr->ifm_active |= IFM_10G_T;
break;
case I40E_PHY_TYPE_XAUI:
case I40E_PHY_TYPE_XFI:
ifmr->ifm_active |= IFM_10G_TWINAX;
break;
case I40E_PHY_TYPE_10GBASE_AOC:
ifmr->ifm_active |= IFM_10G_AOC;
break;
/* 25 G */
case I40E_PHY_TYPE_25GBASE_KR:
ifmr->ifm_active |= IFM_25G_KR;
break;
case I40E_PHY_TYPE_25GBASE_CR:
ifmr->ifm_active |= IFM_25G_CR;
break;
case I40E_PHY_TYPE_25GBASE_SR:
ifmr->ifm_active |= IFM_25G_SR;
break;
case I40E_PHY_TYPE_25GBASE_LR:
ifmr->ifm_active |= IFM_25G_LR;
break;
case I40E_PHY_TYPE_25GBASE_AOC:
ifmr->ifm_active |= IFM_25G_AOC;
break;
case I40E_PHY_TYPE_25GBASE_ACC:
ifmr->ifm_active |= IFM_25G_ACC;
break;
/* 40 G */
case I40E_PHY_TYPE_40GBASE_CR4:
case I40E_PHY_TYPE_40GBASE_CR4_CU:
ifmr->ifm_active |= IFM_40G_CR4;
break;
case I40E_PHY_TYPE_40GBASE_SR4:
ifmr->ifm_active |= IFM_40G_SR4;
break;
case I40E_PHY_TYPE_40GBASE_LR4:
ifmr->ifm_active |= IFM_40G_LR4;
break;
case I40E_PHY_TYPE_XLAUI:
ifmr->ifm_active |= IFM_OTHER;
break;
case I40E_PHY_TYPE_1000BASE_KX:
ifmr->ifm_active |= IFM_1000_KX;
break;
case I40E_PHY_TYPE_SGMII:
ifmr->ifm_active |= IFM_1000_SGMII;
break;
/* ERJ: What's the difference between these? */
case I40E_PHY_TYPE_10GBASE_CR1_CU:
case I40E_PHY_TYPE_10GBASE_CR1:
ifmr->ifm_active |= IFM_10G_CR1;
break;
case I40E_PHY_TYPE_10GBASE_KX4:
ifmr->ifm_active |= IFM_10G_KX4;
break;
case I40E_PHY_TYPE_10GBASE_KR:
ifmr->ifm_active |= IFM_10G_KR;
break;
case I40E_PHY_TYPE_SFI:
ifmr->ifm_active |= IFM_10G_SFI;
break;
/* Our single 20G media type */
case I40E_PHY_TYPE_20GBASE_KR2:
ifmr->ifm_active |= IFM_20G_KR2;
break;
case I40E_PHY_TYPE_40GBASE_KR4:
ifmr->ifm_active |= IFM_40G_KR4;
break;
case I40E_PHY_TYPE_XLPPI:
case I40E_PHY_TYPE_40GBASE_AOC:
ifmr->ifm_active |= IFM_40G_XLPPI;
break;
/* Unknown to driver */
default:
ifmr->ifm_active |= IFM_UNKNOWN;
break;
}
/* Report flow control status as well */
if (hw->phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX)
ifmr->ifm_active |= IFM_ETH_TXPAUSE;
if (hw->phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX)
ifmr->ifm_active |= IFM_ETH_RXPAUSE;
}
static int
ixl_if_media_change(if_ctx_t ctx)
{
struct ifmedia *ifm = iflib_get_media(ctx);
INIT_DEBUGOUT("ixl_media_change: begin");
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
return (EINVAL);
if_printf(iflib_get_ifp(ctx), "Media change is not supported.\n");
return (ENODEV);
}
static int
ixl_if_promisc_set(if_ctx_t ctx, int flags)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct ifnet *ifp = iflib_get_ifp(ctx);
struct i40e_hw *hw = vsi->hw;
int err;
bool uni = FALSE, multi = FALSE;
if (flags & IFF_PROMISC)
uni = multi = TRUE;
else if (flags & IFF_ALLMULTI ||
if_multiaddr_count(ifp, MAX_MULTICAST_ADDR) == MAX_MULTICAST_ADDR)
multi = TRUE;
err = i40e_aq_set_vsi_unicast_promiscuous(hw,
vsi->seid, uni, NULL, true);
if (err)
return (err);
err = i40e_aq_set_vsi_multicast_promiscuous(hw,
vsi->seid, multi, NULL);
return (err);
}
static void
ixl_if_timer(if_ctx_t ctx, uint16_t qid)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
//struct i40e_hw *hw = &pf->hw;
//struct ixl_tx_queue *que = &vsi->tx_queues[qid];
#if 0
u32 mask;
/*
** Check status of the queues
*/
mask = (I40E_PFINT_DYN_CTLN_INTENA_MASK |
I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK);
/* If queue param has outstanding work, trigger sw irq */
// TODO: TX queues in iflib don't use HW interrupts; does this do anything?
if (que->busy)
wr32(hw, I40E_PFINT_DYN_CTLN(que->txr.me), mask);
#endif
if (qid != 0)
return;
/* Fire off the adminq task */
iflib_admin_intr_deferred(ctx);
/* Update stats */
ixl_update_stats_counters(pf);
}
static void
ixl_if_vlan_register(if_ctx_t ctx, u16 vtag)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = vsi->hw;
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
return;
++vsi->num_vlans;
ixl_add_filter(vsi, hw->mac.addr, vtag);
}
static void
ixl_if_vlan_unregister(if_ctx_t ctx, u16 vtag)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
struct i40e_hw *hw = vsi->hw;
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
return;
--vsi->num_vlans;
ixl_del_filter(vsi, hw->mac.addr, vtag);
}
static uint64_t
ixl_if_get_counter(if_ctx_t ctx, ift_counter cnt)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ixl_vsi *vsi = &pf->vsi;
if_t ifp = iflib_get_ifp(ctx);
switch (cnt) {
case IFCOUNTER_IPACKETS:
return (vsi->ipackets);
case IFCOUNTER_IERRORS:
return (vsi->ierrors);
case IFCOUNTER_OPACKETS:
return (vsi->opackets);
case IFCOUNTER_OERRORS:
return (vsi->oerrors);
case IFCOUNTER_COLLISIONS:
/* Collisions are by standard impossible in 40G/10G Ethernet */
return (0);
case IFCOUNTER_IBYTES:
return (vsi->ibytes);
case IFCOUNTER_OBYTES:
return (vsi->obytes);
case IFCOUNTER_IMCASTS:
return (vsi->imcasts);
case IFCOUNTER_OMCASTS:
return (vsi->omcasts);
case IFCOUNTER_IQDROPS:
return (vsi->iqdrops);
case IFCOUNTER_OQDROPS:
return (vsi->oqdrops);
case IFCOUNTER_NOPROTO:
return (vsi->noproto);
default:
return (if_get_counter_default(ifp, cnt));
}
}
static void
ixl_if_vflr_handle(if_ctx_t ctx)
{
IXL_DEV_ERR(iflib_get_dev(ctx), "");
// TODO: call ixl_handle_vflr()
}
static int
ixl_if_i2c_req(if_ctx_t ctx, struct ifi2creq *req)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
if (pf->read_i2c_byte == NULL)
return (EINVAL);
for (int i = 0; i < req->len; i++)
if (pf->read_i2c_byte(pf, req->offset + i,
req->dev_addr, &req->data[i]))
return (EIO);
return (0);
}
static int
ixl_if_priv_ioctl(if_ctx_t ctx, u_long command, caddr_t data)
{
struct ixl_pf *pf = iflib_get_softc(ctx);
struct ifdrv *ifd = (struct ifdrv *)data;
int error = 0;
/* NVM update command */
if (ifd->ifd_cmd == I40E_NVM_ACCESS)
error = ixl_handle_nvmupd_cmd(pf, ifd);
else
error = EINVAL;
return (error);
}
static int
ixl_mc_filter_apply(void *arg, struct ifmultiaddr *ifma, int count __unused)
{
struct ixl_vsi *vsi = arg;
if (ifma->ifma_addr->sa_family != AF_LINK)
return (0);
ixl_add_mc_filter(vsi,
(u8*)LLADDR((struct sockaddr_dl *) ifma->ifma_addr));
return (1);
}
/*
* Sanity check and save off tunable values.
*/
static void
ixl_save_pf_tunables(struct ixl_pf *pf)
{
device_t dev = pf->dev;
/* Save tunable information */
pf->enable_tx_fc_filter = ixl_enable_tx_fc_filter;
pf->dbg_mask = ixl_core_debug_mask;
pf->hw.debug_mask = ixl_shared_debug_mask;
pf->vsi.enable_head_writeback = !!(ixl_enable_head_writeback);
#if 0
pf->dynamic_rx_itr = ixl_dynamic_rx_itr;
pf->dynamic_tx_itr = ixl_dynamic_tx_itr;
#endif
if (ixl_i2c_access_method > 3 || ixl_i2c_access_method < 0)
pf->i2c_access_method = 0;
else
pf->i2c_access_method = ixl_i2c_access_method;
if (ixl_tx_itr < 0 || ixl_tx_itr > IXL_MAX_ITR) {
device_printf(dev, "Invalid tx_itr value of %d set!\n",
ixl_tx_itr);
device_printf(dev, "tx_itr must be between %d and %d, "
"inclusive\n",
0, IXL_MAX_ITR);
device_printf(dev, "Using default value of %d instead\n",
IXL_ITR_4K);
pf->tx_itr = IXL_ITR_4K;
} else
pf->tx_itr = ixl_tx_itr;
if (ixl_rx_itr < 0 || ixl_rx_itr > IXL_MAX_ITR) {
device_printf(dev, "Invalid rx_itr value of %d set!\n",
ixl_rx_itr);
device_printf(dev, "rx_itr must be between %d and %d, "
"inclusive\n",
0, IXL_MAX_ITR);
device_printf(dev, "Using default value of %d instead\n",
IXL_ITR_8K);
pf->rx_itr = IXL_ITR_8K;
} else
pf->rx_itr = ixl_rx_itr;
}