freebsd-nq/sbin/geom/class/eli/geli.8

.\" Copyright (c) 2005 Pawel Jakub Dawidek <pjd@FreeBSD.org>
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd February 11, 2006
.Dt GELI 8
.Os
.Sh NAME
.Nm geli
.Nd "control utility for cryptographic GEOM class"
.Sh SYNOPSIS
To compile GEOM_ELI into your kernel, place the following lines in your kernel
configuration file:
.Bd -ragged -offset indent
.Cd "device crypto"
.Cd "options GEOM_ELI"
.Ed
.Pp
Alternately, to load the GEOM_ELI module at boot time, place the following line
in your
.Xr loader.conf 5 :
.Bd -literal -offset indent
geom_eli_load="YES"
.Ed
.Pp
Usage of the
.Xr geli 8
utility:
.Pp
.Nm
.Cm init
.Op Fl bPv
.Op Fl a Ar algo
.Op Fl i Ar iterations
.Op Fl K Ar newkeyfile
.Op Fl l Ar keylen
.Op Fl s Ar sectorsize
.Ar prov
.Nm
.Cm label - an alias for
.Cm init
.Nm
.Cm attach
.Op Fl dpv
.Op Fl k Ar keyfile
.Ar prov
.Nm
.Cm detach
.Op Fl fl
.Ar prov ...
.Nm
.Cm stop - an alias for
.Cm detach
.Nm
.Cm onetime
.Op Fl d
.Op Fl a Ar algo
.Op Fl l Ar keylen
.Op Fl s Ar sectorsize
.Ar prov ...
.Nm
.Cm setkey
.Op Fl pPv
.Op Fl i Ar iterations
.Op Fl k Ar keyfile
.Op Fl K Ar newkeyfile
.Op Fl n Ar keyno
.Ar prov
.Nm
.Cm delkey
.Op Fl afv
.Op Fl n Ar keyno
.Ar prov
.Nm
.Cm kill
.Op Fl av
.Op Ar prov ...
.Nm
.Cm backup
.Op Fl v
.Ar prov
.Ar file
.Nm
.Cm restore
.Op Fl v
.Ar file
.Ar prov
.Nm
.Cm clear
.Op Fl v
.Ar prov ...
.Nm
.Cm dump
.Op Fl v
.Ar prov ...
.Nm
.Cm list
.Nm
.Cm status
.Nm
.Cm load
.Nm
.Cm unload
.Sh DESCRIPTION
The
.Nm
utility is used to configure encryption on GEOM providers.
.Pp
The following is a list of the most important features:
.Pp
.Bl -bullet -offset indent -compact
.It
Utilizes the
.Xr crypto 9
framework, so when there is crypto hardware available,
.Nm
will make use of it automatically.
.It
Supports many cryptographic algorithms (currently
.Nm AES ,
.Nm Blowfish
and
.Nm 3DES ) .
.It
Can create a key from a couple of components (user entered passphrase, random
bits from a file, etc.).
.It
Allows to encrypt the root partition - the user will be asked for the
passphrase before the root file system is mounted.
.It
The passphrase of the user is strengthened with:
.Rs 
.%A B. Kaliski
.%T "PKCS #5: Password-Based Cryptography Specification, Version 2.0."
.%R RFC
.%N 2898
.Re
.It
Allows to use two independent keys (e.g.
.Qq "user key"
and
.Qq "company key" ) .
.It
It is fast - 
.Nm
performs simple sector-to-sector encryption.
.It
Allows to backup/restore Master Keys, so when a user has to quickly
destroy his keys,
it is possible to get the data back by restoring keys from the backup.
.It
Providers can be configured to automatically detach on last close
(so users do not have to remember to detach providers after unmounting
the file systems).
.It
Allows to attach a provider with a random, one-time key - useful for swap
partitions and temporary file systems.
.El
.Pp
The first argument to
.Nm
indicates an action to be performed:
.Bl -tag -width ".Cm onetime"
.It Cm init
Initialize provider which needs to be encrypted.
Here you can set up the cryptographic algorithm to use, key length, etc.
The last provider's sector is used to store metadata.
.Pp
Additional options include:
.Bl -tag -width ".Fl a Ar algo"
.It Fl a Ar algo
Encryption algorithm to use.
Currently supported algorithms are:
.Nm AES ,
.Nm Blowfish
and
.Nm 3DES .
The default is
.Nm AES .
.It Fl b
Ask for the passphrase on boot, before the root partition is mounted.
This makes it possible to use an encrypted root partition.
One will still need bootable unencrypted storage with a
.Pa /boot/
directory, which can be a CD-ROM disc or USB pen-drive, that can be removed
after boot.
.It Fl i Ar iterations
Number of iterations to use with PKCS#5v2.
If this option is not specified,
.Nm
will find the number of iterations which is equal to 2 seconds of crypto work.
If 0 is given, PKCS#5v2 will not be used.
.It Fl K Ar newkeyfile
Specifies a file which contains part of the key.
If
.Ar newkeyfile
is given as -, standard input will be used.
Here is how more than one file with a key component can be used:
.Bd -literal -offset indent
# cat key1 key2 key3 | geli init -K - /dev/da0
.Ed
.It Fl l Ar keylen
Key length to use with the given cryptographic algorithm.
If not given, the default key length for the given algorithm is used, which is:
128 for
.Nm AES ,
128 for
.Nm Blowfish
and 192 for
.Nm 3DES .
.It Fl s Ar sectorsize
Change decrypted provider's sector size.
Increasing sector size allows to increase performance, because we need to
generate an IV and do encrypt/decrypt for every single sector - less number
of sectors means less work to do.
.It Fl P
Do not use passphrase as the key component.
.El
.It Cm attach
Attach the given provider.
The master key will be decrypted using the given
passphrase/keyfile and a new GEOM provider will be created using the given
provider's name with an
.Qq .eli
suffix.
.Pp
Additional options include:
.Bl -tag -width ".Fl a Ar algo"
.It Fl d
If specified, a decrypted provider will be detached automatically on last close.
This can help with short memory - user does not have to remember to detach the
provider after unmounting the file system.
It only works when the provider was opened for writing, so it will not work if
the file system on the provider is mounted read-only.
Probably a better choice is the
.Fl l
option for the
.Cm detach
subcommand.
.It Fl k Ar keyfile
Specifies a file which contains part of the key.
For more information see the description of the
.Fl K
option for the
.Cm init
subcommand.
.It Fl p
Do not use passphrase as the key component.
.El
.It Cm detach
Detach the given providers, which means remove the devfs entry
and clear the keys from memory.
.Pp
Additional options include:
.Bl -tag -width ".Fl a Ar algo"
.It Fl f
Force detach - detach even if the provider is open.
.It Fl l
Mark provider to detach on last close.
If this option is specified, the provider will not be detached
until it is open, but when it will be closed last time, it will
be automatically detached (even
if it was only opened for reading).
.El
.It Cm onetime
Attach the given providers with random, one-time keys.
The command can be used to encrypt swap partitions or temporary file systems.
.Pp
Additional options include:
.Bl -tag -width ".Fl a Ar algo"
.It Fl a Ar algo
Encryption algorithm to use.
For more information, see the description of the
.Cm init
subcommand.
.It Fl d
Detach on last close.
Note, the option is not usable for temporary file systems as the provider will
be detached after creating the file system on it.
It still can (and should be) used for swap partitions.
For more information, see the description of the
.Cm attach
subcommand.
.It Fl l Ar keylen
Key length to use with the given cryptographic algorithm.
For more information, see the description of the
.Cm init
subcommand.
.It Fl s Ar sectorsize
Change decrypted provider's sector size.
For more information, see the description of the
.Cm init
subcommand.
.El
.It Cm setkey
Change or setup (if not yet initialized) selected key.
There is one master key, which can be encrypted with two independent user keys.
With the
.Cm init
subcommand, only key number 0 is initialized.
The key can always be changed: for an attached provider,
for a detached provider or on the backup file.
When a provider is attached, the user does not have to provide
an old passphrase/keyfile.
.Pp
Additional options include:
.Bl -tag -width ".Fl a Ar algo"
.It Fl i Ar iterations
Number of iterations to use with PKCS#5v2.
If 0 is given, PKCS#5v2 will not be used.
To be able to use this option with
.Cm setkey
subcommand, only one key have to be defined and this key has to be changed.
.It Fl k Ar keyfile
Specifies a file which contains part of the old key.
.It Fl K Ar newkeyfile
Specifies a file which contains part of the new key.
.It Fl n Ar keyno
Specifies the number of the key to change (could be 0 or 1).
If the provider is attached and no key number is given, the key
used for attaching the provider will be changed.
If the provider is detached (or we are operating on a backup file)
and no key number is given, the key decrypted with the passphrase/keyfile
will be changed.
.It Fl p
Do not use passphrase as the old key component.
.It Fl P
Do not use passphrase as the new key component.
.El
.It Cm delkey
Destroy (overwrite with random data) the selected key.
If one is destroying keys for an attached provider, the provider
will not be detached even if all keys will be destroyed.
It can be even rescued with the
.Cm setkey
subcommand.
.Bl -tag -width ".Fl a Ar algo"
.It Fl a
Destroy all keys (does not need
.Fl f
option).
.It Fl f
Force key destruction.
This option is needed to destroy the last key.
.It Fl n Ar keyno
Specifies the key number.
If the provider is attached and no key number is given, the key
used for attaching the provider will be destroyed.
If provider is detached (or we are operating on a backup file) the key number
has to be given.
.El
.It Cm kill
This command should be used in emergency situations.
It will destroy all keys on the given provider and will detach it forcibly
(if it is attached).
This is absolutely a one-way command - if you do not have a metadata
backup, your data is gone for good.
.Bl -tag -width ".Fl a Ar algo"
.It Fl a
If specified, all currently attached providers will be killed.
.El
.It Cm backup
Backup metadata from the given provider to the given file.
.It Cm restore
Restore metadata from the given file to the given provider.
.It Cm clear
Clear metadata from the given providers.
.It Cm dump
Dump metadata stored on the given providers.
.It Cm list
See
.Xr geom 8 .
.It Cm status
See
.Xr geom 8 .
.It Cm load
See
.Xr geom 8 .
.It Cm unload
See
.Xr geom 8 .
.El
.Pp
Additional options include:
.Bl -tag -width ".Fl v"
.It Fl v
Be more verbose.
.El
.Sh SYSCTL VARIABLES
The following
.Xr sysctl 8
variables can be used to control the behavior of the
.Nm ELI
GEOM class.
The default value is shown next to each variable.
.Bl -tag -width indent
.It Va kern.geom.eli.debug : No 0
Debug level of the
.Nm ELI
GEOM class.
This can be set to a number between 0 and 3 inclusive.
If set to 0, minimal debug information is printed.
If set to 3, the
maximum amount of debug information is printed.
This variable could be set in
.Pa /boot/loader.conf .
.It Va kern.geom.eli.tries : No 3
Number of times a user is asked for the passphrase.
This is only used for providers which should be attached on boot
(before the root file system is mounted).
If set to 0, attaching providers on boot will be disabled.
This variable should be set in
.Pa /boot/loader.conf .
.It Va kern.geom.eli.overwrites : No 5
Specifies how many times the Master-Key will be overwritten
with random values when it is destroyed.
After this operation it is filled with zeros.
.It Va kern.geom.eli.visible_passphrase : No 0
If set to 1, the passphrase entered on boot (before the root
file system is mounted) will be visible.
This possibility should be used with caution as the entered
passphrase can be logged and exposed via
.Xr dmesg 8 .
This variable should be set in
.Pa /boot/loader.conf .
.It Va kern.geom.eli.threads : No 0
Specifies how many kernel threads should be used for doing software
cryptography.
Its purpose is to increase performance on SMP systems.
If hardware acceleration is available, only one thread will be started.
If set to 0, CPU-bound thread will be started for every active CPU.
This variable could be set in
.Pa /boot/loader.conf .
.El
.Sh EXIT STATUS
Exit status is 0 on success, and 1 if the command fails.
.Sh EXAMPLES
Initialize a provider which is going to be encrypted with a
passphrase and random data from a file on the user's pen drive.
Use 4kB sector size.
Attach the provider, create a file system and mount it.
Do the work.
Unmount the provider and detach it:
.Bd -literal -offset indent
# dd if=/dev/random of=/mnt/pendrive/da2.key bs=64 count=1
# geli init -s 4096 -K /mnt/pendrive/da2.key /dev/da2
Enter new passphrase:
Reenter new passphrase:
# geli attach -k /mnt/pendrive/da2.key /dev/da2
Enter passphrase:
# dd if=/dev/random of=/dev/da2.eli bs=1m
# newfs /dev/da2.eli
# mount /dev/da2.eli /mnt/secret
\&...
# umount /mnt/secret
# geli detach da2.eli
.Ed
.Pp
Create an encrypted provider, but use two keys:
one for your girlfriend and one for
you (so there will be no tragedy if she forgets her passphrase):
.Bd -literal -offset indent
# geli init /dev/da2
Enter new passphrase:	(enter your passphrase)
Reenter new passphrase:
# geli setkey -n 1 /dev/da2
Enter passphrase:	(enter your passphrase)
Enter new passphrase:	(let your girlfriend enter her passphrase ...)
Reenter new passphrase:	(... twice)
.Ed
.Pp
You are the security-person in your company.
Create an encrypted provider for use by the user, but remember that users
forget their passphrases, so back Master Key up with your own random key:
.Bd -literal -offset indent
# dd if=/dev/random of=/mnt/pendrive/keys/`hostname` bs=64 count=1
# geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ad0s1e
# geli backup /dev/ad0s1e /mnt/pendrive/backups/`hostname`
(use key number 0, so the encrypted Master Key by you will be overwritten)
# geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ad0s1e
(allow the user to enter his passphrase)
Enter new passphrase:
Reenter new passphrase:
.Ed
.Pp
Encrypted swap partition setup:
.Bd -literal -offset indent
# dd if=/dev/random of=/dev/ad0s1b bs=1m
# geli onetime -d -a 3des ad0s1b
# swapon /dev/ad0s1b.eli
.Ed
.Pp
The example below shows how to configure two providers which will be attached
on boot (before the root file system is mounted).
One of them is using passphrase and three keyfiles and the other is using only a
keyfile:
.Bd -literal -offset indent
# dd if=/dev/random of=/dev/da0 bs=1m
# dd if=/dev/random of=/boot/keys/da0.key0 bs=32k count=1
# dd if=/dev/random of=/boot/keys/da0.key1 bs=32k count=1
# dd if=/dev/random of=/boot/keys/da0.key2 bs=32k count=1
# cat /boot/keys/da0.key0 /boot/keys/da0.key1 /boot/keys/da0.key2 | geli init -b -K - da0
Enter new passphrase:
Reenter new passphrase:
# dd if=/dev/random of=/dev/da1s3a bs=1m
# dd if=/dev/random of=/boot/keys/da1s3a.key bs=128k count=1
# geli init -b -P -K /boot/keys/da1s3a.key da1s3a
.Ed
.Pp
The providers are initialized, now we have to add those lines to
.Pa /boot/loader.conf :
.Bd -literal -offset indent
geli_da0_keyfile0_load="YES"
geli_da0_keyfile0_type="da0:geli_keyfile0"
geli_da0_keyfile0_name="/boot/keys/da0.key0"
geli_da0_keyfile1_load="YES"
geli_da0_keyfile1_type="da0:geli_keyfile1"
geli_da0_keyfile1_name="/boot/keys/da0.key1"
geli_da0_keyfile2_load="YES"
geli_da0_keyfile2_type="da0:geli_keyfile2"
geli_da0_keyfile2_name="/boot/keys/da0.key2"

geli_da1s3a_keyfile0_load="YES"
geli_da1s3a_keyfile0_type="da1s3a:geli_keyfile0"
geli_da1s3a_keyfile0_name="/boot/keys/da1s3a.key"
.Ed
.Sh SEE ALSO
.Xr crypto 4 ,
.Xr gbde 4 ,
.Xr geom 4 ,
.Xr loader.conf 5 ,
.Xr gbde 8 ,
.Xr geom 8 ,
.Xr crypto 9
.Sh HISTORY
The
.Nm
utility appeared in
.Fx 6.0 .
.Sh AUTHORS
.An Pawel Jakub Dawidek Aq pjd@FreeBSD.org