d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4f6c19e593
freebsd-nq/etc/mtree/BSD.include.dist

191 lines
2.1 KiB
Plaintext
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-27 23:37:10 +00:00
# $FreeBSD$
Fix script in README to actually work, empty lines produce as much a diff as lines with the wrong stuff on it. Add references in mtree data files to the README.
1999-08-23 05:12:43 +00:00
#
Mention the path to the README file in the header comment. Submitted by: Rich Morin <rdm@cfcl.com>
2001-06-26 13:50:33 +00:00
# Please see the file src/etc/mtree/README before making changes to this file.
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
#
Change file ownership from bin.bin to root.wheel.
1998-09-14 08:34:45 +00:00
/set type=dir uname=root gname=wheel mode=0755
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
.
arpa
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
..
Create a subdirectory where bsnmp include files will be stuffed to.
2003-11-10 09:04:24 +00:00
bsnmp
..
Scheduled sweep using the README guidelines. Approved by: re (rwatson)
2003-11-29 18:22:01 +00:00
c++
3.3
backward
..
bits
..
ext
..
..
..
Add new cam include hierarchy.
1998-09-15 10:22:37 +00:00
cam
scsi
..
..
install sys/opencrypto include files in /usr/include/crypto
2002-10-04 20:44:28 +00:00
crypto
..
Install the USB include files in /usr/include/dev/usb. We should still sort out some way of avoiding the clutter. Not all files should be there. Prompted by: Louis A. Mamakos <louie@TransSys.COM>
2000-01-25 09:24:23 +00:00
dev
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
an
..
Move the bktr(4) <arch>/include/ioctl_{bt848,meteor}.h files to dev/bktr as these ioctl's aren't MD. This also means they are installed in /usr/include/dev/bktr now. Also provide compatability wrappers for where these headers lived in 4.x.
2003-12-08 07:22:42 +00:00
bktr
..
Scheduled sweep using the README guidelines. Approved by: re (rwatson)
2003-11-29 18:22:01 +00:00
firewire
..
Don't use tabs here!
2001-06-05 07:07:52 +00:00
ic
..
Unbreak installworld. Apparently /usr/include/dev grew a couple of subdirectories, but nobody informed mtree.
2002-09-19 08:35:12 +00:00
iicbus
..
Install the include files in sys/dev/ofw.
2002-10-18 15:30:50 +00:00
ofw
..
Add dev/ppbus for lptio.h
2000-05-19 22:07:47 +00:00
ppbus
..
Unbreak installworld. Apparently /usr/include/dev grew a couple of subdirectories, but nobody informed mtree.
2002-09-19 08:35:12 +00:00
smbus
..
Install the USB include files in /usr/include/dev/usb. We should still sort out some way of avoiding the clutter. Not all files should be there. Prompted by: Louis A. Mamakos <louie@TransSys.COM>
2000-01-25 09:24:23 +00:00
usb
..
This is a driver for the physical layer chips used in ATM interfaces. It currently supports the PMC Sierra Lite, Ultra and 622 chips and the IDT 77105. The driver handles media options and state in a consistent manner for ATM drivers. The next commit to the midway driver will make it use utopia.
2003-06-12 14:28:32 +00:00
utopia
..
Move MD <machine/if_wavelan_ieee.h> to MI <dev/wi/if_wavelan_ieee.h>
2001-01-09 00:50:45 +00:00
wi
..
Install the USB include files in /usr/include/dev/usb. We should still sort out some way of avoiding the clutter. Not all files should be there. Prompted by: Louis A. Mamakos <louie@TransSys.COM>
2000-01-25 09:24:23 +00:00
..
Actually install include/fs/smbfs and include/netsmb directories.
2001-04-11 09:00:09 +00:00
fs
Install devfs includes.
2001-12-17 13:38:58 +00:00
devfs
..
- FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc -> fdescfs, portal -> portalfs, union -> unionfs. - Renamed corresponding kernel options: FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS. - Install header files for the above file systems. - Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland Makefiles.
2001-05-23 09:42:29 +00:00
fdescfs
..
fifofs
..
- sys/msdosfs moved to sys/fs/msdosfs - msdos.ko renamed to msdosfs.ko - /usr/include/msdosfs moved to /usr/include/fs/msdosfs
2001-05-25 08:14:14 +00:00
msdosfs
..
- sys/n[tw]fs moved to sys/fs/n[tw]fs - /usr/include/n[tw]fs moved to /usr/include/fs/n[tw]fs
2001-05-26 11:57:45 +00:00
ntfs
..
- FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc -> fdescfs, portal -> portalfs, union -> unionfs. - Renamed corresponding kernel options: FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS. - Install header files for the above file systems. - Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland Makefiles.
2001-05-23 09:42:29 +00:00
nullfs
..
- sys/n[tw]fs moved to sys/fs/n[tw]fs - /usr/include/n[tw]fs moved to /usr/include/fs/n[tw]fs
2001-05-26 11:57:45 +00:00
nwfs
..
- FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc -> fdescfs, portal -> portalfs, union -> unionfs. - Renamed corresponding kernel options: FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS. - Install header files for the above file systems. - Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland Makefiles.
2001-05-23 09:42:29 +00:00
portalfs
..
procfs
..
People, please read the README file!!! : These files use 4 space indentation, and other than in the header : comments, should not contain any tabs.
2001-04-13 06:56:16 +00:00
smbfs
..
Scheduled sweep using the README guidelines. Approved by: re (rwatson)
2003-11-29 18:22:01 +00:00
udf
..
- FDESC, FIFO, NULL, PORTAL, PROC, UMAP and UNION file systems were repo-copied from sys/miscfs to sys/fs. - Renamed the following file systems and their modules: fdesc -> fdescfs, portal -> portalfs, union -> unionfs. - Renamed corresponding kernel options: FDESC -> FDESCFS, PORTAL -> PORTALFS, UNION -> UNIONFS. - Install header files for the above file systems. - Removed bogus -I${.CURDIR}/../../sys CFLAGS from userland Makefiles.
2001-05-23 09:42:29 +00:00
umapfs
..
unionfs
..
Actually install include/fs/smbfs and include/netsmb directories.
2001-04-11 09:00:09 +00:00
..
Install geom include files.
2003-02-08 13:25:48 +00:00
geom
..
Add "gnu" to the list of subdirs
2004-02-16 22:23:34 +00:00
gnu
Add "posix" subdir to "gnu"
2004-02-25 02:51:37 +00:00
posix
..
Add "gnu" to the list of subdirs
2004-02-16 22:23:34 +00:00
..
Build the ISC library as libisc. This library comes as part of the bind distribution, but until now was not being built as a separate entity. For documentation, see these man pages: assertions(3), eventlib(3), heap(3), logging(3), memcluster(3), tree(3). Reviewed by: jdp
2000-10-24 20:10:25 +00:00
isc
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
isofs
cd9660
..
..
Install additional headers for Kerberos (libkafs, libkadm5*, and libhdb).
2003-10-09 19:50:00 +00:00
kadm5
..
Add new include/libmilter directory for libmilter (sendmail mail filter API) include files
2002-02-17 22:10:56 +00:00
libmilter
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
machine
Install sys/security/lomac/*.h to /usr/include/security/lomac/. Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/. PR: docs/29534 Install sys/netatm/*/*.h to /usr/include/netatm/*/. Don't install compatibility symlinks for <machine/soundcard.h> and <machine/joystick.h>. Three years is enough to be aware of the change, and these weren't visible in the SHARED=symlinks case. Back out include/Makefile,v 1.160 that was a null change anyway due to the bug in the path, and we now don't want to install these headers because they would otherwise be invisible in the SHARED=symlinks case. Don't install IPFILTER headers. Userland utilities fetch them directly, and they were not visible in the SHARED=symlinks case. Resurrect SHARED=symlinks in Makefile.inc1. PR: bin/28002 Prodded by: bde MFC after: 2 weeks
2002-03-26 16:05:14 +00:00
pc
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
..
net
..
install new 802.11 headers
2003-06-25 14:59:17 +00:00
net80211
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
netatalk
..
(this is an extract from src/share/examples/atm/README) =================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
netatm
Install sys/security/lomac/*.h to /usr/include/security/lomac/. Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/. PR: docs/29534 Install sys/netatm/*/*.h to /usr/include/netatm/*/. Don't install compatibility symlinks for <machine/soundcard.h> and <machine/joystick.h>. Three years is enough to be aware of the change, and these weren't visible in the SHARED=symlinks case. Back out include/Makefile,v 1.160 that was a null change anyway due to the bug in the path, and we now don't want to install these headers because they would otherwise be invisible in the SHARED=symlinks case. Don't install IPFILTER headers. Userland utilities fetch them directly, and they were not visible in the SHARED=symlinks case. Resurrect SHARED=symlinks in Makefile.inc1. PR: bin/28002 Prodded by: bde MFC after: 2 weeks
2002-03-26 16:05:14 +00:00
ipatm
..
sigpvc
..
spans
..
uni
..
(this is an extract from src/share/examples/atm/README) =================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
..
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
netgraph
Install the include file for the netgraph ATM node.
2003-06-25 13:28:06 +00:00
atm
..
Make directory for bluetooth include files.
2002-11-21 00:36:19 +00:00
bluetooth
include
..
..
Whistle's Netgraph link-layer (sometimes more) networking infrastructure. Been in production for 3 years now. Gives Instant Frame relay to if_sr and if_ar drivers, and PPPOE support soon. See: ftp://ftp.whistle.com/pub/archie/netgraph/index.html for on-line manual pages. Reviewed by: Doug Rabson (dfr@freebsd.org) Obtained from: Whistle CVS tree
1999-10-21 09:06:11 +00:00
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
netinet
..
Add missing netinet6. Detected by: make world
1999-11-05 18:49:00 +00:00
netinet6
..
install "fast ipsec" include files
2002-10-18 04:21:29 +00:00
netipsec
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
netipx
..
netkey
..
Add /usr/include/netnatm/
2000-10-15 00:43:06 +00:00
netnatm
Add a sub-directory for the NgATM message encoding/decoding header files.
2003-11-03 12:26:47 +00:00
msg
..
Add a sub-directory to netnatm for the SAAL headers.
2003-10-22 13:15:09 +00:00
saal
..
Add a sub-directory for the signalling layer headers of NgATM.
2003-11-07 08:57:42 +00:00
sig
..
Add /usr/include/netnatm/
2000-10-15 00:43:06 +00:00
..
Make libncp actually compiled. Reviewed by: mdodd
1999-10-14 06:40:46 +00:00
netncp
..
Add netsmb and smbfs include directories
2001-04-10 08:16:06 +00:00
netsmb
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
nfs
..
Userland part of nfs client/server split and cleanup.
2001-09-18 23:34:44 +00:00
nfsclient
..
nfsserver
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
objc
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
..
Add directories: preparation for OpenSSL import.
1999-12-25 14:12:09 +00:00
openssl
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
pccard
..
Reviewed by: msmith, bde long ago POSIX.4 headers and sysctl variables. Nothing should change unless POSIX4 is defined or _POSIX_VERSION is set to 199309.
1998-03-04 10:27:00 +00:00
posix4
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
protocols
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
readline
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
rpc
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
..
Regenerate these using mtree -cdinx -kuname,gname,mode on a very recently built release after fixing all the wrong directory permissions in that release. Then use diff -c -b to verify them against the old versions, nothing but new directories added :-). And a lot of alphabetizing done!
1995-05-17 09:31:17 +00:00
rpcsvc
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
..
Add the directory "/usr/include/security", which is where the PAM header files go. I am not too happy about the name. But if we are to have any hope of being able to use 3rd party PAM modules, we'll have to live with it.
1998-11-18 01:51:25 +00:00
security
Introduce support for Mandatory Access Control and extensible kernel access control. Create directories for per-policy include files. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 22:37:08 +00:00
mac_biba
..
mac_bsdextended
..
Don't install old LOMAC include files; do install new mac_lomac include files. Approved by: re (jhb) Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-12-03 15:05:32 +00:00
mac_lomac
..
Introduce support for Mandatory Access Control and extensible kernel access control. Create directories for per-policy include files. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 22:37:08 +00:00
mac_mls
..
Install mac_partition include files. Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-10-24 15:25:37 +00:00
mac_partition
..
Add the directory "/usr/include/security", which is where the PAM header files go. I am not too happy about the name. But if we are to have any hope of being able to use 3rd party PAM modules, we'll have to live with it.
1998-11-18 01:51:25 +00:00
..
Back out symlinks/directories removing until solution will be found since they are really directories in the release (for unknown reason for me)
1997-06-04 23:05:31 +00:00
sys
..
ufs
ffs
..
ufs
..
..
vm
..
Use new mtree file to rebuild /usr/include.
1995-03-18 07:02:10 +00:00
..
Reference in New Issue Copy Permalink