freebsd-nq/release/picobsd/custom/PICOBSD-C

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD$

machine		i386
cpu		I386_CPU
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		GENERIC
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	MD_ROOT			#MD is a potential root device
options 	MFS			#Memory Filesystem
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, "NFS" req'ed
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root. "CD9660" req'ed
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Be pessimistic about Joe SCSI device
options 	UCONSOLE		#Allow users to grab the console
# options 	USERCONFIG		#boot -c editor
# options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) syscall trace support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options 	NCPU=2			# number of CPUs
#options 	NBUS=4			# number of busses
#options 	NAPIC=1			# number of IO APICs
#options 	NINTR=24		# number of INTs

controller	isa0
controller	eisa0
controller	pci0

# Floppy drives
controller	fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1

# ATA and ATAPI devices
controller	ata0	at isa? port IO_WD1 irq 14
controller	ata1	at isa? port IO_WD2 irq 15
controller	ata2
device		atadisk0	# ATA disk drives
device		atapicd0	# ATAPI CDROM drives
device		atapifd0	# ATAPI floppy drives
device		atapist0	# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering
#options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

# SCSI Controllers
# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is
# sufficient for any number of installed devices.
# controller	ahb0		# EISA AHA1742 family
controller	ahc0		# AHA2940 and onboard AIC7xxx devices
# controller	amd0		# AMD 53C974 (Teckram DC-390(T))
# controller	dpt0		# DPT Smartcache - See LINT for options!
# controller	isp0		# Qlogic family
# controller	ncr0		# NCR/Symbios Logic
controller	sym0		# NCR/Symbios Logic (do not mix with ncr, it conflicts)

# controller	adv0	at isa? port ? irq ?
# controller	adw0
# controller	bt0	at isa? port ? irq ?
# controller	aha0	at isa? port ? irq ?
# controller	aic0	at isa? port ? irq ?

# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
controller	scbus0		# SCSI bus (required)
device		da0		# Direct Access (disks)
device		sa0		# Sequential Access (tape etc)
device		cd0		# CD
device		pass0		# Passthrough device (direct SCSI access)

# RAID controllers
# device		amr0		# AMI MegaRAID
# device		mlx0		# Mylex DAC960 family

# Proprietary or custom CD-ROM Interfaces
# device		wt0	at isa? port 0x300 irq 5 drq 1
# device		mcd0	at isa? port 0x300 irq 10
# device		matcd0	at isa? port 0x230
# device		scd0	at isa? port 0x230

# atkbdc0 controls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12

device		vga0	at isa? port ? conflicts

# splash screen/screen saver
# pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa?

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
#controller	card0
#device		pcic0	at isa?
#device		pcic1	at isa?

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? port? flags 0x40 irq 7
controller	ppbus0		# Parallel port bus (required)
device		lpt0		# Printer
device		plip0		# TCP/IP over parallel
device		ppi0		# Parallel port interface device
#controller	vpo0		# Requires scbus and da0


# PCI Ethernet NICs.
device		de0		# DEC/Intel DC21x4x (``Tulip'')
device		fxp0		# Intel EtherExpress PRO/100B (82557, 82558)
device		tx0		# SMC 9432TX (83c170 ``EPIC'')
device		vx0		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
controller	miibus0		# MII bus support
device		dc0		# DEC/Intel 21143 and various workalikes
device		rl0		# RealTek 8129/8139
device		sf0		# Adaptec AIC-6915 (``Starfire'')
device		sis0		# Silicon Integrated Systems SiS 900/SiS 7016
device		ste0		# Sundance ST201 (D-Link DFE-550TX)
device		tl0		# Texas Instruments ThunderLAN
device		vr0		# VIA Rhine, Rhine II
device		wb0		# Winbond W89C840F
device		xl0		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.
device		ed0	at isa? port 0x280 irq 10 iomem 0xd8000
device		ex0	at isa? port? irq?
device		ep0
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device		ie0	at isa? port 0x300 irq 10 iomem 0xd0000
device		fe0	at isa? port 0x300 irq ?
device		le0	at isa? port 0x300 irq 5 iomem 0xd0000
device		lnc0	at isa? port 0x280 irq 10 drq 0
device		cs0	at isa? port 0x300 irq ?
# requires PCCARD (PCMCIA) support to be activated
#device		xe0	at isa? port? irq ?

# PCCARD NIC drivers.
# ze and zp take over the pcic and cannot coexist with generic pccard
# support, nor the ed and ep drivers they replace.
#device		ze0	at isa? port 0x300 irq 10 iomem 0xd8000	
#device		zp0	at isa? port 0x300 irq 10 iomem 0xd8000

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
# pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
#controller	uhci0		# UHCI PCI->USB interface
#controller	ohci0		# OHCI PCI->USB interface
#controller	usb0		# USB Bus (required)
#device		ugen0		# Generic
#device		uhid0		# "Human Interface Devices"
#device		ukbd0		# Keyboard
#device		ulpt0		# Printer
#controller	umass0		# Disks/Mass storage - Requires scbus and da0
#device		ums0		# Mouse
Add 'custom' directory with significantly restructured build (now using make instead of custom scripts) and two floppies instead of one. The resultant floppy can do everything that the individual floppies (dial, net, install, isp, router) could do, modulo some bit rot that has occurred since PicoBSD last compiled. It also includes all the programs on the fixit floppy, which could thus also die. /bin currently contains the following files: -sh dump ln ns sps [ ed login ping stty badsect ex ls ps swapon cat expr mkdir pwd sync chgrp fdisk mknod pwd_mkdb sysctl chmod find more rdump syslogd chown fsck mount reboot tar chroot ftp mount_cd9660 restore telnet clri getty mount_msdos rlogin telnetd cp grep mount_nfs rm test date gunzip mount_std rmdir traceroute dd gzip msg route umount dev_mkdb hostname mt routed vi df ifconfig mv rrestore view dhclient inetd natd rsh vm dhclient-script init netstat sed w disklabel kget newfs sh zcat dmesg kill nfs sleep Structure is in place for using the same build for the other directories, but I'm no longer sure we need this. The current first floppy will run fine by itself, but the size of a compressed kernel has increased by nearly 50% since 3.2, and there's not much space for anything useful on the remainder of the floppy. The current method creates a larger mfs and can read as many floppies as the user can stand. The footprint appears to be round 14 MB. 1999-12-10 21:52:18 +00:00			`#`
			`# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks`
			`#`
			`# For more information on this file, please read the handbook section on`
			`# Kernel Configuration Files:`
			`#`
			`# http://www.freebsd.org/handbook/kernelconfig-config.html`
			`#`
			`# The handbook is also available locally in /usr/share/doc/handbook`
			`# if you've installed the doc distribution, otherwise always see the`
			`# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the`
			`# latest information.`
			`#`
			`# An exhaustive list of options and more detailed explanations of the`
			`# device lines is also present in the ./LINT configuration file. If you are`
			`# in doubt as to the purpose or necessity of a line, check first in LINT.`
			`#`
			`# $FreeBSD$`

			`machine i386`
			`cpu I386_CPU`
			`cpu I486_CPU`
			`cpu I586_CPU`
			`cpu I686_CPU`
			`ident GENERIC`
			`maxusers 32`

			`#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols`

			`options MATH_EMULATE #Support for x87 emulation`
			`options INET #InterNETworking`
			`options FFS #Berkeley Fast Filesystem`
			`options FFS_ROOT #FFS usable as root device [keep this!]`
			`options MD_ROOT #MD is a potential root device`
			`options MFS #Memory Filesystem`
			`options NFS #Network Filesystem`
			`options NFS_ROOT #NFS usable as root device, "NFS" req'ed`
			`options MSDOSFS #MSDOS Filesystem`
			`options CD9660 #ISO 9660 Filesystem`
			`options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed`
			`options PROCFS #Process filesystem`
			`options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]`
			`options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device`
			`options UCONSOLE #Allow users to grab the console`
			`# options USERCONFIG #boot -c editor`
			`# options VISUAL_USERCONFIG #visual boot -c editor`
			`options KTRACE #ktrace(1) syscall trace support`
			`options SYSVSHM #SYSV-style shared memory`
			`options SYSVMSG #SYSV-style message queues`
			`options SYSVSEM #SYSV-style semaphores`

			`# To make an SMP kernel, the next two are needed`
			`#options SMP # Symmetric MultiProcessor Kernel`
			`#options APIC_IO # Symmetric (APIC) I/O`
			`# Optionally these may need tweaked, (defaults shown):`
			`#options NCPU=2 # number of CPUs`
			`#options NBUS=4 # number of busses`
			`#options NAPIC=1 # number of IO APICs`
			`#options NINTR=24 # number of INTs`

			`controller isa0`
			`controller eisa0`
			`controller pci0`

			`# Floppy drives`
			`controller fdc0 at isa? port IO_FD1 irq 6 drq 2`
			`device fd0 at fdc0 drive 0`
			`device fd1 at fdc0 drive 1`

			`# ATA and ATAPI devices`
			`controller ata0 at isa? port IO_WD1 irq 14`
			`controller ata1 at isa? port IO_WD2 irq 15`
			`controller ata2`
			`device atadisk0 # ATA disk drives`
			`device atapicd0 # ATAPI CDROM drives`
			`device atapifd0 # ATAPI floppy drives`
			`device atapist0 # ATAPI tape drives`
			`options ATA_STATIC_ID #Static device numbering`
			`#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices`

			`# SCSI Controllers`
			`# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is`
			`# sufficient for any number of installed devices.`
			`# controller ahb0 # EISA AHA1742 family`
			`controller ahc0 # AHA2940 and onboard AIC7xxx devices`
			`# controller amd0 # AMD 53C974 (Teckram DC-390(T))`
			`# controller dpt0 # DPT Smartcache - See LINT for options!`
			`# controller isp0 # Qlogic family`
			`# controller ncr0 # NCR/Symbios Logic`
			`controller sym0 # NCR/Symbios Logic (do not mix with ncr, it conflicts)`

			`# controller adv0 at isa? port ? irq ?`
			`# controller adw0`
			`# controller bt0 at isa? port ? irq ?`
			`# controller aha0 at isa? port ? irq ?`
			`# controller aic0 at isa? port ? irq ?`

			`# SCSI peripherals`
			`# Only one of each of these is needed, they are dynamically allocated.`
			`controller scbus0 # SCSI bus (required)`
			`device da0 # Direct Access (disks)`
			`device sa0 # Sequential Access (tape etc)`
			`device cd0 # CD`
			`device pass0 # Passthrough device (direct SCSI access)`

			`# RAID controllers`
			`# device amr0 # AMI MegaRAID`
			`# device mlx0 # Mylex DAC960 family`

			`# Proprietary or custom CD-ROM Interfaces`
			`# device wt0 at isa? port 0x300 irq 5 drq 1`
			`# device mcd0 at isa? port 0x300 irq 10`
			`# device matcd0 at isa? port 0x230`
			`# device scd0 at isa? port 0x230`

			`# atkbdc0 controls both the keyboard and the PS/2 mouse`
			`controller atkbdc0 at isa? port IO_KBD`
			`device atkbd0 at atkbdc? irq 1`
			`device psm0 at atkbdc? irq 12`

			`device vga0 at isa? port ? conflicts`

			`# splash screen/screen saver`
			`# pseudo-device splash`

			`# syscons is the default console driver, resembling an SCO console`
			`device sc0 at isa?`

			`# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver`
			`#device vt0 at isa?`
			`#options XSERVER # support for X server`
			`#options FAT_CURSOR # start with block cursor`
			`# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines`
			`#options PCVT_SCANSET=2 # IBM keyboards are non-std`

			`# Floating point support - do not disable.`
			`device npx0 at nexus? port IO_NPX irq 13`

			`# Power management support (see LINT for more options)`
			`device apm0 at nexus? disable flags 0x20 # Advanced Power Management`

			`# PCCARD (PCMCIA) support`
			`#controller card0`
			`#device pcic0 at isa?`
			`#device pcic1 at isa?`

			`# Serial (COM) ports`
			`device sio0 at isa? port IO_COM1 flags 0x10 irq 4`
			`device sio1 at isa? port IO_COM2 irq 3`
			`device sio2 at isa? disable port IO_COM3 irq 5`
			`device sio3 at isa? disable port IO_COM4 irq 9`

			`# Parallel port`
			`device ppc0 at isa? port? flags 0x40 irq 7`
			`controller ppbus0 # Parallel port bus (required)`
			`device lpt0 # Printer`
			`device plip0 # TCP/IP over parallel`
			`device ppi0 # Parallel port interface device`
			`#controller vpo0 # Requires scbus and da0`


			`# PCI Ethernet NICs.`
			device de0 # DEC/Intel DC21x4x (``Tulip'')
			`device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)`
			device tx0 # SMC 9432TX (83c170 ``EPIC'')
			device vx0 # 3Com 3c590, 3c595 (``Vortex'')

			`# PCI Ethernet NICs that use the common MII bus controller code.`
			`controller miibus0 # MII bus support`
			`device dc0 # DEC/Intel 21143 and various workalikes`
			`device rl0 # RealTek 8129/8139`
			device sf0 # Adaptec AIC-6915 (``Starfire'')
			`device sis0 # Silicon Integrated Systems SiS 900/SiS 7016`
			`device ste0 # Sundance ST201 (D-Link DFE-550TX)`
			`device tl0 # Texas Instruments ThunderLAN`
			`device vr0 # VIA Rhine, Rhine II`
			`device wb0 # Winbond W89C840F`
			device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')

			`# ISA Ethernet NICs.`
			`device ed0 at isa? port 0x280 irq 10 iomem 0xd8000`
			`device ex0 at isa? port? irq?`
			`device ep0`
			`# The probe order of these is presently determined by i386/isa/isa_compat.c.`
			`device ie0 at isa? port 0x300 irq 10 iomem 0xd0000`
			`device fe0 at isa? port 0x300 irq ?`
			`device le0 at isa? port 0x300 irq 5 iomem 0xd0000`
			`device lnc0 at isa? port 0x280 irq 10 drq 0`
			`device cs0 at isa? port 0x300 irq ?`
			`# requires PCCARD (PCMCIA) support to be activated`
			`#device xe0 at isa? port? irq ?`

			`# PCCARD NIC drivers.`
			`# ze and zp take over the pcic and cannot coexist with generic pccard`
			`# support, nor the ed and ep drivers they replace.`
			`#device ze0 at isa? port 0x300 irq 10 iomem 0xd8000`
			`#device zp0 at isa? port 0x300 irq 10 iomem 0xd8000`

			`# Pseudo devices - the number indicates how many units to allocated.`
			`pseudo-device loop # Network loopback`
			`pseudo-device ether # Ethernet support`
			`# pseudo-device sl 1 # Kernel SLIP`
			`pseudo-device ppp 1 # Kernel PPP`
			`pseudo-device tun # Packet tunnel.`
			`pseudo-device pty # Pseudo-ttys (telnet etc)`
			`pseudo-device md # Memory "disks"`

			# The `bpf' pseudo-device enables the Berkeley Packet Filter.
			`# Be aware of the administrative consequences of enabling this!`
			`pseudo-device bpf #Berkeley packet filter`

			`# USB support`
			`#controller uhci0 # UHCI PCI->USB interface`
			`#controller ohci0 # OHCI PCI->USB interface`
			`#controller usb0 # USB Bus (required)`
			`#device ugen0 # Generic`
			`#device uhid0 # "Human Interface Devices"`
			`#device ukbd0 # Keyboard`
			`#device ulpt0 # Printer`
			`#controller umass0 # Disks/Mass storage - Requires scbus and da0`
			`#device ums0 # Mouse`