d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5215ce1038
freebsd-nq/sys/dev/ath/ath_hal/ar5210/ar5210.h

282 lines
13 KiB
C
Raw Normal View History

virgin import of ath hal
2008-11-28 00:03:41 +00:00
/*
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
virgin import of ath hal
2008-11-28 00:03:41 +00:00
* Copyright (c) 2002-2004 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
* $FreeBSD$
virgin import of ath hal
2008-11-28 00:03:41 +00:00
*/
#ifndef _ATH_AR5210_H_
#define _ATH_AR5210_H_
#define AR5210_MAGIC 0x19980124
#if 0
/*
* RTS_ENABLE includes LONG_PKT because they essentially
* imply the same thing, and are set or not set together
* for this chip
*/
#define AR5210_TXD_CTRL_A_HDR_LEN(_val) (((_val) ) & 0x0003f)
#define AR5210_TXD_CTRL_A_TX_RATE(_val) (((_val) << 6) & 0x003c0)
#define AR5210_TXD_CTRL_A_RTS_ENABLE ( 0x00c00)
#define AR5210_TXD_CTRL_A_CLEAR_DEST_MASK(_val) (((_val) << 12) & 0x01000)
#define AR5210_TXD_CTRL_A_ANT_MODE(_val) (((_val) << 13) & 0x02000)
#define AR5210_TXD_CTRL_A_PKT_TYPE(_val) (((_val) << 14) & 0x1c000)
#define AR5210_TXD_CTRL_A_INT_REQ ( 0x20000)
#define AR5210_TXD_CTRL_A_KEY_VALID ( 0x40000)
#define AR5210_TXD_CTRL_B_KEY_ID(_val) (((_val) ) & 0x0003f)
#define AR5210_TXD_CTRL_B_RTS_DURATION(_val) (((_val) << 6) & 0x7ffc0)
#endif
#define INIT_CONFIG_STATUS 0x00000000
#define INIT_ACKTOPS 0x00000008
#define INIT_BCON_CNTRL_REG 0x00000000
#define INIT_SLOT_TIME 0x00000168
#define INIT_SLOT_TIME_TURBO 0x000001e0 /* More aggressive turbo slot timing = 6 us */
#define INIT_ACK_CTS_TIMEOUT 0x04000400
#define INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800
#define INIT_USEC 0x27
#define INIT_USEC_TURBO 0x4f
#define INIT_USEC_32 0x1f
#define INIT_TX_LATENCY 0x36
#define INIT_RX_LATENCY 0x1D
#define INIT_TRANSMIT_LATENCY \
((INIT_RX_LATENCY << AR_USEC_RX_LATENCY_S) | \
(INIT_TX_LATENCY << AR_USEC_TX_LATENCY_S) | \
(INIT_USEC_32 << 7) | INIT_USEC )
#define INIT_TRANSMIT_LATENCY_TURBO \
((INIT_RX_LATENCY << AR_USEC_RX_LATENCY_S) | \
(INIT_TX_LATENCY << AR_USEC_TX_LATENCY_S) | \
(INIT_USEC_32 << 7) | INIT_USEC_TURBO)
#define INIT_SIFS 0x230 /* = 16 us - 2 us */
#define INIT_SIFS_TURBO 0x1E0 /* More aggressive turbo SIFS timing - 8 us - 2 us */
/*
* Various fifo fill before Tx start, in 64-byte units
* i.e. put the frame in the air while still DMAing
*/
#define MIN_TX_FIFO_THRESHOLD 0x1
#define MAX_TX_FIFO_THRESHOLD ((IEEE80211_MAX_LEN / 64) + 1)
#define INIT_NEXT_CFP_START 0xffffffff
#define INIT_BEACON_PERIOD 0xffff
#define INIT_BEACON_EN 0 /* this should be set by AP only when it's ready */
#define INIT_BEACON_CONTROL \
((INIT_RESET_TSF << 24) | (INIT_BEACON_EN << 23) | \
(INIT_TIM_OFFSET<<16) | INIT_BEACON_PERIOD)
#define INIT_RSSI_THR 0x00000700 /* Missed beacon counter initialized to max value of 7 */
#define INIT_ProgIFS 0x398 /* PIFS - 2us */
#define INIT_ProgIFS_TURBO 0x3C0
#define INIT_EIFS 0xd70
#define INIT_EIFS_TURBO 0x1ae0
#define INIT_CARR_SENSE_EN 1
#define INIT_PROTO_TIME_CNTRL ( (INIT_CARR_SENSE_EN << 26) | (INIT_EIFS << 12) | \
(INIT_ProgIFS) )
#define INIT_PROTO_TIME_CNTRL_TURBO ( (INIT_CARR_SENSE_EN << 26) | (INIT_EIFS_TURBO << 12) | \
(INIT_ProgIFS_TURBO) )
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
#define AR5210_MAX_RATE_POWER 60
virgin import of ath hal
2008-11-28 00:03:41 +00:00
#undef HAL_NUM_TX_QUEUES /* from ah.h */
#define HAL_NUM_TX_QUEUES 3
struct ath_hal_5210 {
struct ath_hal_private ah_priv; /* base definitions */
uint8_t ah_macaddr[IEEE80211_ADDR_LEN];
/*
* Runtime state.
*/
uint32_t ah_maskReg; /* shadow of IMR+IER regs */
uint32_t ah_txOkInterruptMask;
uint32_t ah_txErrInterruptMask;
uint32_t ah_txDescInterruptMask;
uint32_t ah_txEolInterruptMask;
uint32_t ah_txUrnInterruptMask;
HAL_POWER_MODE ah_powerMode;
uint8_t ah_bssid[IEEE80211_ADDR_LEN];
HAL_TX_QUEUE_INFO ah_txq[HAL_NUM_TX_QUEUES]; /* beacon+cab+data */
/*
* Station mode support.
*/
uint32_t ah_staId1Defaults; /* STA_ID1 default settings */
uint32_t ah_rssiThr; /* RSSI_THR settings */
u_int ah_sifstime; /* user-specified sifs time */
u_int ah_slottime; /* user-specified slot time */
u_int ah_acktimeout; /* user-specified ack timeout */
u_int ah_ctstimeout; /* user-specified cts timeout */
};
#define AH5210(ah) ((struct ath_hal_5210 *)(ah))
struct ath_hal;
Replace most compile-time support options with linker sets for chip and RF backend support: o add OS_DATA_SET and OS_SET_DECLARE os requirements for setting up linker sets o add AH_CHIP macro for registering chip support (e.g. 5210) o add AH_RF macro for registering RF support (e.g. 2413); note this isn't required for single chip solutions where there's no ambiguity (e.g. 5416/9160+2133) but for 5212 class parts it's required because of the multi-chip solutions o remove all uses of AH_SUPPORT_AR5210, AH_SUPPORT_AR5211, AH_SUPPORT_5212, and AH_SUPPORT_AR9160; still need AH_SUPPORT_AR5416 to enable the 11n descriptor formats and 5312 support is presently broken o remove all uses of AH_SUPPORT_2133, AH_SUPPORT_2413, AH_SUPPORT_5111, AH_SUPPORT_5112, AH_SUPPORT_2417, AH_SUPPORT_2425, and AH_SUPPORT_5413; 5312-related support still requires fixup Remaining issues: o fixup SoC attach o ath_hal_attach uses a hack to probe w/o access to the vendorid o fallback handling of parts w/o a macrev needs to be restored
2008-11-28 19:58:09 +00:00
extern void ar5210Detach(struct ath_hal *ah);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5210Reset(struct ath_hal *, HAL_OPMODE,
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
struct ieee80211_channel *, HAL_BOOL bChannelChange, HAL_STATUS *);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern void ar5210SetPCUConfig(struct ath_hal *);
extern HAL_BOOL ar5210PhyDisable(struct ath_hal *);
extern HAL_BOOL ar5210Disable(struct ath_hal *);
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
extern HAL_BOOL ar5210ChipReset(struct ath_hal *, struct ieee80211_channel *);
extern HAL_BOOL ar5210PerCalibration(struct ath_hal *, struct ieee80211_channel *, HAL_BOOL *);
extern HAL_BOOL ar5210PerCalibrationN(struct ath_hal *ah, struct ieee80211_channel *chan,
Update to later code from my repository: o many bug fixes o add new periodic calibration api o break up 5416 periodic calibration code in preparation for 928x o move get noise floor to rf backends o 5416-specific ani (still disabled) o modularize 5210 eeprom format a la other eeprom formats o start cleaning up regdomain code o prepare for proper 1/2 and 1/4 width channel support o bring back 900MHz card support o clean up 5212 rf version handling o add 1/2 and 1/4 width channel support for 5212 parts o split 5212 rfgain handling out o improve ani debugging o add AH_USE_INIPDGAIN compile option o purge a bunch of dead 5212 state o add 1/2 and 1/4 rate modes o remove HAL_CAP_CHAN_HALFRATE and HAL_CAP_CHAN_QUARTERRATE; the same info can now be deduced from the set of supported modes
2008-11-28 00:48:05 +00:00
u_int chainMask, HAL_BOOL longCal, HAL_BOOL *isCalDone);
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
extern HAL_BOOL ar5210ResetCalValid(struct ath_hal *ah, const struct ieee80211_channel *);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern int16_t ar5210GetNoiseFloor(struct ath_hal *);
extern int16_t ar5210GetNfAdjust(struct ath_hal *,
const HAL_CHANNEL_INTERNAL *);
extern HAL_BOOL ar5210SetTxPowerLimit(struct ath_hal *, uint32_t limit);
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
extern HAL_BOOL ar5210SetTransmitPower(struct ath_hal *,
const struct ieee80211_channel *);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern HAL_BOOL ar5210CalNoiseFloor(struct ath_hal *, HAL_CHANNEL_INTERNAL *);
extern HAL_BOOL ar5210ResetDma(struct ath_hal *, HAL_OPMODE);
extern HAL_BOOL ar5210SetTxQueueProps(struct ath_hal *ah, int q,
const HAL_TXQ_INFO *qInfo);
extern HAL_BOOL ar5210GetTxQueueProps(struct ath_hal *ah, int q,
HAL_TXQ_INFO *qInfo);
extern int ar5210SetupTxQueue(struct ath_hal *ah, HAL_TX_QUEUE type,
const HAL_TXQ_INFO *qInfo);
extern HAL_BOOL ar5210ReleaseTxQueue(struct ath_hal *ah, u_int q);
extern HAL_BOOL ar5210ResetTxQueue(struct ath_hal *ah, u_int q);
extern uint32_t ar5210GetTxDP(struct ath_hal *, u_int);
extern HAL_BOOL ar5210SetTxDP(struct ath_hal *, u_int, uint32_t txdp);
extern HAL_BOOL ar5210UpdateTxTrigLevel(struct ath_hal *, HAL_BOOL);
extern uint32_t ar5210NumTxPending(struct ath_hal *, u_int);
extern HAL_BOOL ar5210StartTxDma(struct ath_hal *, u_int);
extern HAL_BOOL ar5210StopTxDma(struct ath_hal *, u_int);
extern HAL_BOOL ar5210SetupTxDesc(struct ath_hal *, struct ath_desc *,
u_int pktLen, u_int hdrLen, HAL_PKT_TYPE type, u_int txPower,
u_int txRate0, u_int txRetries0,
u_int keyIx, u_int antMode, u_int flags,
u_int rtsctsRate, u_int rtsctsDuration,
u_int compicvLen, u_int compivLen, u_int comp);
extern HAL_BOOL ar5210SetupXTxDesc(struct ath_hal *, struct ath_desc *,
u_int txRate1, u_int txRetries1,
u_int txRate2, u_int txRetries2,
u_int txRate3, u_int txRetries3);
extern HAL_BOOL ar5210FillTxDesc(struct ath_hal *, struct ath_desc *,
u_int segLen, HAL_BOOL firstSeg, HAL_BOOL lastSeg,
const struct ath_desc *ds0);
extern HAL_STATUS ar5210ProcTxDesc(struct ath_hal *,
struct ath_desc *, struct ath_tx_status *);
extern void ar5210GetTxIntrQueue(struct ath_hal *ah, uint32_t *);
extern void ar5210IntrReqTxDesc(struct ath_hal *ah, struct ath_desc *);
extern uint32_t ar5210GetRxDP(struct ath_hal *);
extern void ar5210SetRxDP(struct ath_hal *, uint32_t rxdp);
extern void ar5210EnableReceive(struct ath_hal *);
extern HAL_BOOL ar5210StopDmaReceive(struct ath_hal *);
extern void ar5210StartPcuReceive(struct ath_hal *);
extern void ar5210StopPcuReceive(struct ath_hal *);
extern void ar5210SetMulticastFilter(struct ath_hal *,
uint32_t filter0, uint32_t filter1);
extern HAL_BOOL ar5210ClrMulticastFilterIndex(struct ath_hal *, uint32_t);
extern HAL_BOOL ar5210SetMulticastFilterIndex(struct ath_hal *, uint32_t);
extern uint32_t ar5210GetRxFilter(struct ath_hal *);
extern void ar5210SetRxFilter(struct ath_hal *, uint32_t);
extern HAL_BOOL ar5210SetupRxDesc(struct ath_hal *, struct ath_desc *,
uint32_t, u_int flags);
extern HAL_STATUS ar5210ProcRxDesc(struct ath_hal *, struct ath_desc *,
uint32_t, struct ath_desc *, uint64_t,
struct ath_rx_status *);
extern void ar5210GetMacAddress(struct ath_hal *, uint8_t *);
extern HAL_BOOL ar5210SetMacAddress(struct ath_hal *ah, const uint8_t *);
extern void ar5210GetBssIdMask(struct ath_hal *, uint8_t *);
extern HAL_BOOL ar5210SetBssIdMask(struct ath_hal *, const uint8_t *);
extern HAL_BOOL ar5210EepromRead(struct ath_hal *, u_int off, uint16_t *data);
extern HAL_BOOL ar5210EepromWrite(struct ath_hal *, u_int off, uint16_t data);
extern HAL_BOOL ar5210SetRegulatoryDomain(struct ath_hal *,
uint16_t, HAL_STATUS *);
extern u_int ar5210GetWirelessModes(struct ath_hal *ah);
extern void ar5210EnableRfKill(struct ath_hal *);
extern HAL_BOOL ar5210GpioCfgInput(struct ath_hal *, uint32_t gpio);
5416 and later parts mux the gpio outputs; extend the api to include a signal type that's used to select the appropriate mux
2009-02-24 00:12:16 +00:00
extern HAL_BOOL ar5210GpioCfgOutput(struct ath_hal *, uint32_t gpio,
HAL_GPIO_MUX_TYPE);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern uint32_t ar5210GpioGet(struct ath_hal *, uint32_t gpio);
extern HAL_BOOL ar5210GpioSet(struct ath_hal *, uint32_t gpio, uint32_t);
extern void ar5210Gpio0SetIntr(struct ath_hal *, u_int, uint32_t ilevel);
extern void ar5210SetLedState(struct ath_hal *, HAL_LED_STATE);
extern u_int ar5210GetDefAntenna(struct ath_hal *);
extern void ar5210SetDefAntenna(struct ath_hal *, u_int);
extern HAL_ANT_SETTING ar5210GetAntennaSwitch(struct ath_hal *);
extern HAL_BOOL ar5210SetAntennaSwitch(struct ath_hal *, HAL_ANT_SETTING);
extern void ar5210WriteAssocid(struct ath_hal *,
const uint8_t *bssid, uint16_t assocId);
extern uint32_t ar5210GetTsf32(struct ath_hal *);
extern uint64_t ar5210GetTsf64(struct ath_hal *);
extern void ar5210ResetTsf(struct ath_hal *);
extern uint32_t ar5210GetRandomSeed(struct ath_hal *);
extern HAL_BOOL ar5210DetectCardPresent(struct ath_hal *);
extern void ar5210UpdateMibCounters(struct ath_hal *, HAL_MIB_STATS *);
extern void ar5210EnableHwEncryption(struct ath_hal *);
extern void ar5210DisableHwEncryption(struct ath_hal *);
extern HAL_RFGAIN ar5210GetRfgain(struct ath_hal *);
extern HAL_BOOL ar5210SetSifsTime(struct ath_hal *, u_int);
extern u_int ar5210GetSifsTime(struct ath_hal *);
extern HAL_BOOL ar5210SetSlotTime(struct ath_hal *, u_int);
extern u_int ar5210GetSlotTime(struct ath_hal *);
extern HAL_BOOL ar5210SetAckTimeout(struct ath_hal *, u_int);
extern u_int ar5210GetAckTimeout(struct ath_hal *);
extern HAL_BOOL ar5210SetAckCTSRate(struct ath_hal *, u_int);
extern u_int ar5210GetAckCTSRate(struct ath_hal *);
extern HAL_BOOL ar5210SetCTSTimeout(struct ath_hal *, u_int);
extern u_int ar5210GetCTSTimeout(struct ath_hal *);
extern HAL_BOOL ar5210SetDecompMask(struct ath_hal *, uint16_t, int);
void ar5210SetCoverageClass(struct ath_hal *, uint8_t, int);
extern HAL_STATUS ar5210GetCapability(struct ath_hal *, HAL_CAPABILITY_TYPE,
uint32_t, uint32_t *);
extern HAL_BOOL ar5210SetCapability(struct ath_hal *, HAL_CAPABILITY_TYPE,
uint32_t, uint32_t, HAL_STATUS *);
extern HAL_BOOL ar5210GetDiagState(struct ath_hal *ah, int request,
const void *args, uint32_t argsize,
void **result, uint32_t *resultsize);
extern u_int ar5210GetKeyCacheSize(struct ath_hal *);
extern HAL_BOOL ar5210IsKeyCacheEntryValid(struct ath_hal *, uint16_t);
extern HAL_BOOL ar5210ResetKeyCacheEntry(struct ath_hal *, uint16_t entry);
extern HAL_BOOL ar5210SetKeyCacheEntry(struct ath_hal *, uint16_t entry,
const HAL_KEYVAL *, const uint8_t *mac, int xorKey);
extern HAL_BOOL ar5210SetKeyCacheEntryMac(struct ath_hal *,
uint16_t, const uint8_t *);
extern HAL_BOOL ar5210SetPowerMode(struct ath_hal *, uint32_t powerRequest,
int setChip);
extern HAL_POWER_MODE ar5210GetPowerMode(struct ath_hal *);
extern void ar5210SetBeaconTimers(struct ath_hal *,
const HAL_BEACON_TIMERS *);
extern void ar5210BeaconInit(struct ath_hal *, uint32_t, uint32_t);
extern void ar5210SetStaBeaconTimers(struct ath_hal *,
const HAL_BEACON_STATE *);
extern void ar5210ResetStaBeaconTimers(struct ath_hal *);
extern HAL_BOOL ar5210IsInterruptPending(struct ath_hal *);
extern HAL_BOOL ar5210GetPendingInterrupts(struct ath_hal *, HAL_INT *);
extern HAL_INT ar5210GetInterrupts(struct ath_hal *);
extern HAL_INT ar5210SetInterrupts(struct ath_hal *, HAL_INT ints);
extern const HAL_RATE_TABLE *ar5210GetRateTable(struct ath_hal *, u_int mode);
extern HAL_BOOL ar5210AniControl(struct ath_hal *, HAL_ANI_CMD, int );
Overhaul regulatory support: o remove HAL_CHANNEL; convert the hal to use net80211 channels; this mostly involves mechanical changes to variable names and channel attribute macros o gut HAL_CHANNEL_PRIVATE as most of the contents are now redundant with the net80211 channel available o change api for ath_hal_init_channels: no more reglass id's, no more outdoor indication (was a noop), anM contents o add ath_hal_getchannels to have the hal construct a channel list without altering runtime state; this is used to retrieve the calibration list for the device in ath_getradiocaps o add ath_hal_set_channels to take a channel list and regulatory data from above and construct internal state to match (maps frequencies for 900MHz cards, setup for CTL lookups, etc) o compact the private channel table: we keep one private channel per frequency instead of one per HAL_CHANNEL; this gives a big space savings and potentially improves ani and calibration by sharing state (to be seen; didn't see anything in testing); a new config option AH_MAXCHAN controls the table size (default to 96 which was chosen to be ~3x the largest expected size) o shrink ani state and change to mirror private channel table (one entry per frequency indexed by ic_devdata) o move ani state flags to private channel state o remove country codes; use net80211 definitions instead o remove GSM regulatory support; it's no longer needed now that we pass in channel lists from above o consolidate ADHOC_NO_11A attribute with DISALLOW_ADHOC_11A o simplify initial channel list construction based on the EEPROM contents; we preserve country code support for now but may want to just fallback to a WWR sku and dispatch the discovered country code up to user space so the channel list can be constructed using the master regdomain tables o defer to net80211 for max antenna gain o eliminate sorting of internal channel table; now that we use ic_devdata as an index, table lookups are O(1) o remove internal copy of the country code; the public one is sufficient o remove AH_SUPPORT_11D conditional compilation; we always support 11d o remove ath_hal_ispublicsafetysku; not needed any more o remove ath_hal_isgsmsku; no more GSM stuff o move Conformance Test Limit (CTL) state from private channel to a lookup using per-band pointers cached in the private state block o remove regulatory class id support; was unused and belongs in net80211 o fix channel list construction to set IEEE80211_CHAN_NOADHOC, IEEE80211_CHAN_NOHOSTAP, and IEEE80211_CHAN_4MSXMIT o remove private channel flags CHANNEL_DFS and CHANNEL_4MS_LIMIT; these are now set in the constructed net80211 channel o store CHANNEL_NFCREQUIRED (Noise Floor Required) channel attribute in one of the driver-private flag bits of the net80211 channel o move 900MHz frequency mapping into the hal; the mapped frequency is stored in the private channel and used throughout the hal (no more mapping in the driver and/or net80211) o remove ath_hal_mhz2ieee; it's no longer needed as net80211 does the calculation and available in the net80211 channel o change noise floor calibration logic to work with compacted private channel table setup; this may require revisiting as we no longer can distinguish channel attributes (e.g. 11b vs 11g vs turbo) but since the data is used only to calculate status data we can live with it for now o change ah_getChipPowerLimits internal method to operate on a single channel instead of all channels in the private channel table o add ath_hal_gethwchannel to map a net80211 channel to a h/w frequency (always the same except for 900MHz channels) o add HAL_EEBADREG and HAL_EEBADCC status codes to better identify regulatory problems o remove CTRY_DEBUG and CTRY_DEFAULT enum's; these come from net80211 now o change ath_hal_getwirelessmodes to really return wireless modes supported by the hardware (was previously applying regulatory constraints) o return channel interference status with IEEE80211_CHANSTATE_CWINT (should change to a callback so hal api's can take const pointers) o remove some #define's no longer needed with the inclusion of <net80211/_ieee80211.h> Sponsored by: Carlson Wireless
2009-01-28 18:00:22 +00:00
extern void ar5210AniPoll(struct ath_hal *, const HAL_NODE_STATS *,
const struct ieee80211_channel *);
virgin import of ath hal
2008-11-28 00:03:41 +00:00
extern void ar5210MibEvent(struct ath_hal *, const HAL_NODE_STATS *);
#endif /* _ATH_AR5210_H_ */
Reference in New Issue Copy Permalink