freebsd-nq/sys/kern/kern_cpuset.c

2316 lines
56 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2008, Jeffrey Roberson <jeff@freebsd.org>
* All rights reserved.
*
* Copyright (c) 2008 Nokia Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/ctype.h>
#include <sys/sysproto.h>
#include <sys/jail.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/refcount.h>
#include <sys/sched.h>
#include <sys/smp.h>
#include <sys/syscallsubr.h>
#include <sys/capsicum.h>
#include <sys/cpuset.h>
#include <sys/domainset.h>
#include <sys/sx.h>
#include <sys/queue.h>
#include <sys/libkern.h>
#include <sys/limits.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/vmmeter.h>
#include <vm/uma.h>
#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pageout.h>
#include <vm/vm_extern.h>
#include <vm/vm_param.h>
#include <vm/vm_phys.h>
#include <vm/vm_pagequeue.h>
#ifdef DDB
#include <ddb/ddb.h>
#endif /* DDB */
/*
* cpusets provide a mechanism for creating and manipulating sets of
* processors for the purpose of constraining the scheduling of threads to
* specific processors.
*
* Each process belongs to an identified set, by default this is set 1. Each
* thread may further restrict the cpus it may run on to a subset of this
* named set. This creates an anonymous set which other threads and processes
* may not join by number.
*
* The named set is referred to herein as the 'base' set to avoid ambiguity.
* This set is usually a child of a 'root' set while the anonymous set may
* simply be referred to as a mask. In the syscall api these are referred to
* as the ROOT, CPUSET, and MASK levels where CPUSET is called 'base' here.
*
* Threads inherit their set from their creator whether it be anonymous or
* not. This means that anonymous sets are immutable because they may be
* shared. To modify an anonymous set a new set is created with the desired
* mask and the same parent as the existing anonymous set. This gives the
2009-10-26 17:42:03 +00:00
* illusion of each thread having a private mask.
*
* Via the syscall apis a user may ask to retrieve or modify the root, base,
* or mask that is discovered via a pid, tid, or setid. Modifying a set
* modifies all numbered and anonymous child sets to comply with the new mask.
* Modifying a pid or tid's mask applies only to that tid but must still
* exist within the assigned parent set.
*
* A thread may not be assigned to a group separate from other threads in
* the process. This is to remove ambiguity when the setid is queried with
* a pid argument. There is no other technical limitation.
*
* This somewhat complex arrangement is intended to make it easy for
* applications to query available processors and bind their threads to
* specific processors while also allowing administrators to dynamically
* reprovision by changing sets which apply to groups of processes.
*
* A simple application should not concern itself with sets at all and
* rather apply masks to its own threads via CPU_WHICH_TID and a -1 id
2009-10-26 17:42:03 +00:00
* meaning 'curthread'. It may query available cpus for that tid with a
* getaffinity call using (CPU_LEVEL_CPUSET, CPU_WHICH_PID, -1, ...).
*/
LIST_HEAD(domainlist, domainset);
struct domainset __read_mostly domainset_fixed[MAXMEMDOM];
struct domainset __read_mostly domainset_prefer[MAXMEMDOM];
struct domainset __read_mostly domainset_roundrobin;
static uma_zone_t cpuset_zone;
static uma_zone_t domainset_zone;
static struct mtx cpuset_lock;
static struct setlist cpuset_ids;
static struct domainlist cpuset_domains;
static struct unrhdr *cpuset_unr;
static struct cpuset *cpuset_zero, *cpuset_default, *cpuset_kernel;
static struct domainset domainset0, domainset2;
/* Return the size of cpuset_t at the kernel level */
SYSCTL_INT(_kern_sched, OID_AUTO, cpusetsize, CTLFLAG_RD | CTLFLAG_CAPRD,
SYSCTL_NULL_INT_PTR, sizeof(cpuset_t), "sizeof(cpuset_t)");
cpuset_t *cpuset_root;
cpuset_t cpuset_domain[MAXMEMDOM];
static int domainset_valid(const struct domainset *, const struct domainset *);
/*
* Find the first non-anonymous set starting from 'set'.
*/
static struct cpuset *
cpuset_getbase(struct cpuset *set)
{
if (set->cs_id == CPUSET_INVALID)
set = set->cs_parent;
return (set);
}
/*
* Walks up the tree from 'set' to find the root.
*/
static struct cpuset *
cpuset_getroot(struct cpuset *set)
{
while ((set->cs_flags & CPU_SET_ROOT) == 0 && set->cs_parent != NULL)
set = set->cs_parent;
return (set);
}
/*
* Acquire a reference to a cpuset, all pointers must be tracked with refs.
*/
struct cpuset *
cpuset_ref(struct cpuset *set)
{
refcount_acquire(&set->cs_ref);
return (set);
}
/*
* Walks up the tree from 'set' to find the root. Returns the root
* referenced.
*/
static struct cpuset *
cpuset_refroot(struct cpuset *set)
{
return (cpuset_ref(cpuset_getroot(set)));
}
/*
* Find the first non-anonymous set starting from 'set'. Returns this set
* referenced. May return the passed in set with an extra ref if it is
* not anonymous.
*/
static struct cpuset *
cpuset_refbase(struct cpuset *set)
{
return (cpuset_ref(cpuset_getbase(set)));
}
/*
2009-10-26 17:42:03 +00:00
* Release a reference in a context where it is safe to allocate.
*/
void
cpuset_rel(struct cpuset *set)
{
cpusetid_t id;
if (refcount_release(&set->cs_ref) == 0)
return;
mtx_lock_spin(&cpuset_lock);
LIST_REMOVE(set, cs_siblings);
id = set->cs_id;
if (id != CPUSET_INVALID)
LIST_REMOVE(set, cs_link);
mtx_unlock_spin(&cpuset_lock);
cpuset_rel(set->cs_parent);
uma_zfree(cpuset_zone, set);
if (id != CPUSET_INVALID)
free_unr(cpuset_unr, id);
}
/*
* Deferred release must be used when in a context that is not safe to
* allocate/free. This places any unreferenced sets on the list 'head'.
*/
static void
cpuset_rel_defer(struct setlist *head, struct cpuset *set)
{
if (refcount_release(&set->cs_ref) == 0)
return;
mtx_lock_spin(&cpuset_lock);
LIST_REMOVE(set, cs_siblings);
if (set->cs_id != CPUSET_INVALID)
LIST_REMOVE(set, cs_link);
LIST_INSERT_HEAD(head, set, cs_link);
mtx_unlock_spin(&cpuset_lock);
}
/*
* Complete a deferred release. Removes the set from the list provided to
* cpuset_rel_defer.
*/
static void
cpuset_rel_complete(struct cpuset *set)
{
LIST_REMOVE(set, cs_link);
cpuset_rel(set->cs_parent);
uma_zfree(cpuset_zone, set);
}
/*
* Find a set based on an id. Returns it with a ref.
*/
static struct cpuset *
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
cpuset_lookup(cpusetid_t setid, struct thread *td)
{
struct cpuset *set;
if (setid == CPUSET_INVALID)
return (NULL);
mtx_lock_spin(&cpuset_lock);
LIST_FOREACH(set, &cpuset_ids, cs_link)
if (set->cs_id == setid)
break;
if (set)
cpuset_ref(set);
mtx_unlock_spin(&cpuset_lock);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
KASSERT(td != NULL, ("[%s:%d] td is NULL", __func__, __LINE__));
if (set != NULL && jailed(td->td_ucred)) {
struct cpuset *jset, *tset;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
jset = td->td_ucred->cr_prison->pr_cpuset;
for (tset = set; tset != NULL; tset = tset->cs_parent)
if (tset == jset)
break;
if (tset == NULL) {
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
cpuset_rel(set);
set = NULL;
}
}
return (set);
}
/*
* Create a set in the space provided in 'set' with the provided parameters.
* The set is returned with a single ref. May return EDEADLK if the set
* will have no valid cpu based on restrictions from the parent.
*/
static int
_cpuset_create(struct cpuset *set, struct cpuset *parent,
const cpuset_t *mask, struct domainset *domain, cpusetid_t id)
{
if (domain == NULL)
domain = parent->cs_domain;
if (mask == NULL)
mask = &parent->cs_mask;
if (!CPU_OVERLAP(&parent->cs_mask, mask))
return (EDEADLK);
/* The domain must be prepared ahead of time. */
if (!domainset_valid(parent->cs_domain, domain))
return (EDEADLK);
CPU_COPY(mask, &set->cs_mask);
LIST_INIT(&set->cs_children);
refcount_init(&set->cs_ref, 1);
set->cs_flags = 0;
mtx_lock_spin(&cpuset_lock);
set->cs_domain = domain;
CPU_AND(&set->cs_mask, &parent->cs_mask);
set->cs_id = id;
set->cs_parent = cpuset_ref(parent);
LIST_INSERT_HEAD(&parent->cs_children, set, cs_siblings);
if (set->cs_id != CPUSET_INVALID)
LIST_INSERT_HEAD(&cpuset_ids, set, cs_link);
mtx_unlock_spin(&cpuset_lock);
return (0);
}
/*
* Create a new non-anonymous set with the requested parent and mask. May
* return failures if the mask is invalid or a new number can not be
* allocated.
*/
static int
cpuset_create(struct cpuset **setp, struct cpuset *parent, const cpuset_t *mask)
{
struct cpuset *set;
cpusetid_t id;
int error;
id = alloc_unr(cpuset_unr);
if (id == -1)
return (ENFILE);
*setp = set = uma_zalloc(cpuset_zone, M_WAITOK | M_ZERO);
error = _cpuset_create(set, parent, mask, NULL, id);
if (error == 0)
return (0);
free_unr(cpuset_unr, id);
uma_zfree(cpuset_zone, set);
return (error);
}
static void
cpuset_freelist_add(struct setlist *list, int count)
{
struct cpuset *set;
int i;
for (i = 0; i < count; i++) {
set = uma_zalloc(cpuset_zone, M_ZERO | M_WAITOK);
LIST_INSERT_HEAD(list, set, cs_link);
}
}
static void
cpuset_freelist_init(struct setlist *list, int count)
{
LIST_INIT(list);
cpuset_freelist_add(list, count);
}
static void
cpuset_freelist_free(struct setlist *list)
{
struct cpuset *set;
while ((set = LIST_FIRST(list)) != NULL) {
LIST_REMOVE(set, cs_link);
uma_zfree(cpuset_zone, set);
}
}
static void
domainset_freelist_add(struct domainlist *list, int count)
{
struct domainset *set;
int i;
for (i = 0; i < count; i++) {
set = uma_zalloc(domainset_zone, M_ZERO | M_WAITOK);
LIST_INSERT_HEAD(list, set, ds_link);
}
}
static void
domainset_freelist_init(struct domainlist *list, int count)
{
LIST_INIT(list);
domainset_freelist_add(list, count);
}
static void
domainset_freelist_free(struct domainlist *list)
{
struct domainset *set;
while ((set = LIST_FIRST(list)) != NULL) {
LIST_REMOVE(set, ds_link);
uma_zfree(domainset_zone, set);
}
}
/* Copy a domainset preserving mask and policy. */
static void
domainset_copy(const struct domainset *from, struct domainset *to)
{
DOMAINSET_COPY(&from->ds_mask, &to->ds_mask);
to->ds_policy = from->ds_policy;
to->ds_prefer = from->ds_prefer;
}
/* Return 1 if mask and policy are equal, otherwise 0. */
static int
domainset_equal(const struct domainset *one, const struct domainset *two)
{
return (DOMAINSET_CMP(&one->ds_mask, &two->ds_mask) == 0 &&
one->ds_policy == two->ds_policy &&
one->ds_prefer == two->ds_prefer);
}
/* Return 1 if child is a valid subset of parent. */
static int
domainset_valid(const struct domainset *parent, const struct domainset *child)
{
if (child->ds_policy != DOMAINSET_POLICY_PREFER)
return (DOMAINSET_SUBSET(&parent->ds_mask, &child->ds_mask));
return (DOMAINSET_ISSET(child->ds_prefer, &parent->ds_mask));
}
static int
domainset_restrict(const struct domainset *parent,
const struct domainset *child)
{
if (child->ds_policy != DOMAINSET_POLICY_PREFER)
return (DOMAINSET_OVERLAP(&parent->ds_mask, &child->ds_mask));
return (DOMAINSET_ISSET(child->ds_prefer, &parent->ds_mask));
}
/*
* Lookup or create a domainset. The key is provided in ds_mask and
* ds_policy. If the domainset does not yet exist the storage in
* 'domain' is used to insert. Otherwise this storage is freed to the
* domainset_zone and the existing domainset is returned.
*/
static struct domainset *
_domainset_create(struct domainset *domain, struct domainlist *freelist)
{
struct domainset *ndomain;
int i, j;
KASSERT(domain->ds_cnt <= vm_ndomains,
("invalid domain count in domainset %p", domain));
KASSERT(domain->ds_policy != DOMAINSET_POLICY_PREFER ||
domain->ds_prefer < vm_ndomains,
("invalid preferred domain in domains %p", domain));
mtx_lock_spin(&cpuset_lock);
LIST_FOREACH(ndomain, &cpuset_domains, ds_link)
if (domainset_equal(ndomain, domain))
break;
/*
* If the domain does not yet exist we insert it and initialize
* various iteration helpers which are not part of the key.
*/
if (ndomain == NULL) {
LIST_INSERT_HEAD(&cpuset_domains, domain, ds_link);
domain->ds_cnt = DOMAINSET_COUNT(&domain->ds_mask);
for (i = 0, j = 0; i < DOMAINSET_FLS(&domain->ds_mask); i++)
if (DOMAINSET_ISSET(i, &domain->ds_mask))
domain->ds_order[j++] = i;
}
mtx_unlock_spin(&cpuset_lock);
if (ndomain == NULL)
return (domain);
if (freelist != NULL)
LIST_INSERT_HEAD(freelist, domain, ds_link);
else
uma_zfree(domainset_zone, domain);
return (ndomain);
}
/*
* Are any of the domains in the mask empty? If so, silently
* remove them and update the domainset accordingly. If only empty
* domains are present, we must return failure.
*/
static bool
domainset_empty_vm(struct domainset *domain)
{
domainset_t empty;
int i, j;
DOMAINSET_ZERO(&empty);
for (i = 0; i < vm_ndomains; i++)
if (VM_DOMAIN_EMPTY(i))
DOMAINSET_SET(i, &empty);
if (DOMAINSET_SUBSET(&empty, &domain->ds_mask))
return (true);
/* Remove empty domains from the set and recompute. */
DOMAINSET_NAND(&domain->ds_mask, &empty);
domain->ds_cnt = DOMAINSET_COUNT(&domain->ds_mask);
for (i = j = 0; i < DOMAINSET_FLS(&domain->ds_mask); i++)
if (DOMAINSET_ISSET(i, &domain->ds_mask))
domain->ds_order[j++] = i;
/* Convert a PREFER policy referencing an empty domain to RR. */
if (domain->ds_policy == DOMAINSET_POLICY_PREFER &&
DOMAINSET_ISSET(domain->ds_prefer, &empty)) {
domain->ds_policy = DOMAINSET_POLICY_ROUNDROBIN;
domain->ds_prefer = -1;
}
return (false);
}
/*
* Create or lookup a domainset based on the key held in 'domain'.
*/
struct domainset *
domainset_create(const struct domainset *domain)
{
struct domainset *ndomain;
/*
* Validate the policy. It must specify a useable policy number with
* only valid domains. Preferred must include the preferred domain
* in the mask.
*/
if (domain->ds_policy <= DOMAINSET_POLICY_INVALID ||
domain->ds_policy > DOMAINSET_POLICY_MAX)
return (NULL);
if (domain->ds_policy == DOMAINSET_POLICY_PREFER &&
!DOMAINSET_ISSET(domain->ds_prefer, &domain->ds_mask))
return (NULL);
if (!DOMAINSET_SUBSET(&domainset0.ds_mask, &domain->ds_mask))
return (NULL);
ndomain = uma_zalloc(domainset_zone, M_WAITOK | M_ZERO);
domainset_copy(domain, ndomain);
return _domainset_create(ndomain, NULL);
}
/*
* Update thread domainset pointers.
*/
static void
domainset_notify(void)
{
struct thread *td;
struct proc *p;
sx_slock(&allproc_lock);
FOREACH_PROC_IN_SYSTEM(p) {
PROC_LOCK(p);
if (p->p_state == PRS_NEW) {
PROC_UNLOCK(p);
continue;
}
FOREACH_THREAD_IN_PROC(p, td) {
thread_lock(td);
td->td_domain.dr_policy = td->td_cpuset->cs_domain;
thread_unlock(td);
}
PROC_UNLOCK(p);
}
sx_sunlock(&allproc_lock);
kernel_object->domain.dr_policy = cpuset_kernel->cs_domain;
}
/*
* Create a new set that is a subset of a parent.
*/
static struct domainset *
domainset_shadow(const struct domainset *pdomain,
const struct domainset *domain, struct domainlist *freelist)
{
struct domainset *ndomain;
ndomain = LIST_FIRST(freelist);
LIST_REMOVE(ndomain, ds_link);
/*
* Initialize the key from the request.
*/
domainset_copy(domain, ndomain);
/*
* Restrict the key by the parent.
*/
DOMAINSET_AND(&ndomain->ds_mask, &pdomain->ds_mask);
return _domainset_create(ndomain, freelist);
}
/*
* Recursively check for errors that would occur from applying mask to
* the tree of sets starting at 'set'. Checks for sets that would become
* empty as well as RDONLY flags.
*/
static int
cpuset_testupdate(struct cpuset *set, cpuset_t *mask, int check_mask)
{
struct cpuset *nset;
cpuset_t newmask;
int error;
mtx_assert(&cpuset_lock, MA_OWNED);
if (set->cs_flags & CPU_SET_RDONLY)
return (EPERM);
if (check_mask) {
if (!CPU_OVERLAP(&set->cs_mask, mask))
return (EDEADLK);
CPU_COPY(&set->cs_mask, &newmask);
CPU_AND(&newmask, mask);
} else
CPU_COPY(mask, &newmask);
error = 0;
LIST_FOREACH(nset, &set->cs_children, cs_siblings)
if ((error = cpuset_testupdate(nset, &newmask, 1)) != 0)
break;
return (error);
}
/*
* Applies the mask 'mask' without checking for empty sets or permissions.
*/
static void
cpuset_update(struct cpuset *set, cpuset_t *mask)
{
struct cpuset *nset;
mtx_assert(&cpuset_lock, MA_OWNED);
CPU_AND(&set->cs_mask, mask);
LIST_FOREACH(nset, &set->cs_children, cs_siblings)
cpuset_update(nset, &set->cs_mask);
return;
}
/*
* Modify the set 'set' to use a copy of the mask provided. Apply this new
* mask to restrict all children in the tree. Checks for validity before
* applying the changes.
*/
static int
cpuset_modify(struct cpuset *set, cpuset_t *mask)
{
struct cpuset *root;
int error;
error = priv_check(curthread, PRIV_SCHED_CPUSET);
if (error)
return (error);
/*
* In case we are called from within the jail
* we do not allow modifying the dedicated root
* cpuset of the jail but may still allow to
* change child sets.
*/
if (jailed(curthread->td_ucred) &&
set->cs_flags & CPU_SET_ROOT)
return (EPERM);
/*
* Verify that we have access to this set of
* cpus.
*/
root = cpuset_getroot(set);
mtx_lock_spin(&cpuset_lock);
if (root && !CPU_SUBSET(&root->cs_mask, mask)) {
error = EINVAL;
goto out;
}
error = cpuset_testupdate(set, mask, 0);
if (error)
goto out;
CPU_COPY(mask, &set->cs_mask);
cpuset_update(set, mask);
out:
mtx_unlock_spin(&cpuset_lock);
return (error);
}
/*
* Recursively check for errors that would occur from applying mask to
* the tree of sets starting at 'set'. Checks for sets that would become
* empty as well as RDONLY flags.
*/
static int
cpuset_testupdate_domain(struct cpuset *set, struct domainset *dset,
struct domainset *orig, int *count, int check_mask)
{
struct cpuset *nset;
struct domainset *domain;
struct domainset newset;
int error;
mtx_assert(&cpuset_lock, MA_OWNED);
if (set->cs_flags & CPU_SET_RDONLY)
return (EPERM);
domain = set->cs_domain;
domainset_copy(domain, &newset);
if (!domainset_equal(domain, orig)) {
if (!domainset_restrict(domain, dset))
return (EDEADLK);
DOMAINSET_AND(&newset.ds_mask, &dset->ds_mask);
/* Count the number of domains that are changing. */
(*count)++;
}
error = 0;
LIST_FOREACH(nset, &set->cs_children, cs_siblings)
if ((error = cpuset_testupdate_domain(nset, &newset, domain,
count, 1)) != 0)
break;
return (error);
}
/*
* Applies the mask 'mask' without checking for empty sets or permissions.
*/
static void
cpuset_update_domain(struct cpuset *set, struct domainset *domain,
struct domainset *orig, struct domainlist *domains)
{
struct cpuset *nset;
mtx_assert(&cpuset_lock, MA_OWNED);
/*
* If this domainset has changed from the parent we must calculate
* a new set. Otherwise it simply inherits from the parent. When
* we inherit from the parent we get a new mask and policy. If the
* set is modified from the parent we keep the policy and only
* update the mask.
*/
if (set->cs_domain != orig) {
orig = set->cs_domain;
set->cs_domain = domainset_shadow(domain, orig, domains);
} else
set->cs_domain = domain;
LIST_FOREACH(nset, &set->cs_children, cs_siblings)
cpuset_update_domain(nset, set->cs_domain, orig, domains);
return;
}
/*
* Modify the set 'set' to use a copy the domainset provided. Apply this new
* mask to restrict all children in the tree. Checks for validity before
* applying the changes.
*/
static int
cpuset_modify_domain(struct cpuset *set, struct domainset *domain)
{
struct domainlist domains;
struct domainset temp;
struct domainset *dset;
struct cpuset *root;
int ndomains, needed;
int error;
error = priv_check(curthread, PRIV_SCHED_CPUSET);
if (error)
return (error);
/*
* In case we are called from within the jail
* we do not allow modifying the dedicated root
* cpuset of the jail but may still allow to
* change child sets.
*/
if (jailed(curthread->td_ucred) &&
set->cs_flags & CPU_SET_ROOT)
return (EPERM);
domainset_freelist_init(&domains, 0);
domain = domainset_create(domain);
ndomains = needed = 0;
do {
if (ndomains < needed) {
domainset_freelist_add(&domains, needed - ndomains);
ndomains = needed;
}
root = cpuset_getroot(set);
mtx_lock_spin(&cpuset_lock);
dset = root->cs_domain;
/*
* Verify that we have access to this set of domains.
*/
if (root && !domainset_valid(dset, domain)) {
error = EINVAL;
goto out;
}
/*
* If applying prefer we keep the current set as the fallback.
*/
if (domain->ds_policy == DOMAINSET_POLICY_PREFER)
DOMAINSET_COPY(&set->cs_domain->ds_mask,
&domain->ds_mask);
/*
* Determine whether we can apply this set of domains and
* how many new domain structures it will require.
*/
domainset_copy(domain, &temp);
needed = 0;
error = cpuset_testupdate_domain(set, &temp, set->cs_domain,
&needed, 0);
if (error)
goto out;
} while (ndomains < needed);
dset = set->cs_domain;
cpuset_update_domain(set, domain, dset, &domains);
out:
mtx_unlock_spin(&cpuset_lock);
domainset_freelist_free(&domains);
if (error == 0)
domainset_notify();
return (error);
}
/*
* Resolve the 'which' parameter of several cpuset apis.
*
* For WHICH_PID and WHICH_TID return a locked proc and valid proc/tid. Also
* checks for permission via p_cansched().
*
* For WHICH_SET returns a valid set with a new reference.
*
* -1 may be supplied for any argument to mean the current proc/thread or
* the base set of the current thread. May fail with ESRCH/EPERM.
*/
int
cpuset_which(cpuwhich_t which, id_t id, struct proc **pp, struct thread **tdp,
struct cpuset **setp)
{
struct cpuset *set;
struct thread *td;
struct proc *p;
int error;
*pp = p = NULL;
*tdp = td = NULL;
*setp = set = NULL;
switch (which) {
case CPU_WHICH_PID:
if (id == -1) {
PROC_LOCK(curproc);
p = curproc;
break;
}
if ((p = pfind(id)) == NULL)
return (ESRCH);
break;
case CPU_WHICH_TID:
if (id == -1) {
PROC_LOCK(curproc);
p = curproc;
td = curthread;
break;
}
td = tdfind(id, -1);
if (td == NULL)
return (ESRCH);
p = td->td_proc;
break;
case CPU_WHICH_CPUSET:
if (id == -1) {
thread_lock(curthread);
set = cpuset_refbase(curthread->td_cpuset);
thread_unlock(curthread);
} else
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
set = cpuset_lookup(id, curthread);
if (set) {
*setp = set;
return (0);
}
return (ESRCH);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case CPU_WHICH_JAIL:
{
/* Find `set' for prison with given id. */
struct prison *pr;
sx_slock(&allprison_lock);
pr = prison_find_child(curthread->td_ucred->cr_prison, id);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
sx_sunlock(&allprison_lock);
if (pr == NULL)
return (ESRCH);
cpuset_ref(pr->pr_cpuset);
*setp = pr->pr_cpuset;
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
mtx_unlock(&pr->pr_mtx);
return (0);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
}
case CPU_WHICH_IRQ:
case CPU_WHICH_DOMAIN:
return (0);
default:
return (EINVAL);
}
error = p_cansched(curthread, p);
if (error) {
PROC_UNLOCK(p);
return (error);
}
if (td == NULL)
td = FIRST_THREAD_IN_PROC(p);
*pp = p;
*tdp = td;
return (0);
}
static int
cpuset_testshadow(struct cpuset *set, const cpuset_t *mask,
const struct domainset *domain)
{
struct cpuset *parent;
struct domainset *dset;
parent = cpuset_getbase(set);
/*
* If we are restricting a cpu mask it must be a subset of the
* parent or invalid CPUs have been specified.
*/
if (mask != NULL && !CPU_SUBSET(&parent->cs_mask, mask))
return (EINVAL);
/*
* If we are restricting a domain mask it must be a subset of the
* parent or invalid domains have been specified.
*/
dset = parent->cs_domain;
if (domain != NULL && !domainset_valid(dset, domain))
return (EINVAL);
return (0);
}
/*
* Create an anonymous set with the provided mask in the space provided by
* 'nset'. If the passed in set is anonymous we use its parent otherwise
* the new set is a child of 'set'.
*/
static int
cpuset_shadow(struct cpuset *set, struct cpuset **nsetp,
const cpuset_t *mask, const struct domainset *domain,
struct setlist *cpusets, struct domainlist *domains)
{
struct cpuset *parent;
struct cpuset *nset;
struct domainset *dset;
struct domainset *d;
int error;
error = cpuset_testshadow(set, mask, domain);
if (error)
return (error);
parent = cpuset_getbase(set);
dset = parent->cs_domain;
if (mask == NULL)
mask = &set->cs_mask;
if (domain != NULL)
d = domainset_shadow(dset, domain, domains);
else
d = set->cs_domain;
nset = LIST_FIRST(cpusets);
error = _cpuset_create(nset, parent, mask, d, CPUSET_INVALID);
if (error == 0) {
LIST_REMOVE(nset, cs_link);
*nsetp = nset;
}
return (error);
}
static struct cpuset *
cpuset_update_thread(struct thread *td, struct cpuset *nset)
{
struct cpuset *tdset;
tdset = td->td_cpuset;
td->td_cpuset = nset;
td->td_domain.dr_policy = nset->cs_domain;
sched_affinity(td);
return (tdset);
}
static int
cpuset_setproc_test_maskthread(struct cpuset *tdset, cpuset_t *mask,
struct domainset *domain)
{
struct cpuset *parent;
parent = cpuset_getbase(tdset);
if (mask == NULL)
mask = &tdset->cs_mask;
if (domain == NULL)
domain = tdset->cs_domain;
return cpuset_testshadow(parent, mask, domain);
}
static int
cpuset_setproc_maskthread(struct cpuset *tdset, cpuset_t *mask,
struct domainset *domain, struct cpuset **nsetp,
struct setlist *freelist, struct domainlist *domainlist)
{
struct cpuset *parent;
parent = cpuset_getbase(tdset);
if (mask == NULL)
mask = &tdset->cs_mask;
if (domain == NULL)
domain = tdset->cs_domain;
return cpuset_shadow(parent, nsetp, mask, domain, freelist,
domainlist);
}
static int
cpuset_setproc_setthread_mask(struct cpuset *tdset, struct cpuset *set,
cpuset_t *mask, struct domainset *domain)
{
struct cpuset *parent;
parent = cpuset_getbase(tdset);
/*
* If the thread restricted its mask then apply that same
* restriction to the new set, otherwise take it wholesale.
*/
if (CPU_CMP(&tdset->cs_mask, &parent->cs_mask) != 0) {
CPU_COPY(&tdset->cs_mask, mask);
CPU_AND(mask, &set->cs_mask);
} else
CPU_COPY(&set->cs_mask, mask);
/*
* If the thread restricted the domain then we apply the
* restriction to the new set but retain the policy.
*/
if (tdset->cs_domain != parent->cs_domain) {
domainset_copy(tdset->cs_domain, domain);
DOMAINSET_AND(&domain->ds_mask, &set->cs_domain->ds_mask);
} else
domainset_copy(set->cs_domain, domain);
if (CPU_EMPTY(mask) || DOMAINSET_EMPTY(&domain->ds_mask))
return (EDEADLK);
return (0);
}
static int
cpuset_setproc_test_setthread(struct cpuset *tdset, struct cpuset *set)
{
struct domainset domain;
cpuset_t mask;
if (tdset->cs_id != CPUSET_INVALID)
return (0);
return cpuset_setproc_setthread_mask(tdset, set, &mask, &domain);
}
static int
cpuset_setproc_setthread(struct cpuset *tdset, struct cpuset *set,
struct cpuset **nsetp, struct setlist *freelist,
struct domainlist *domainlist)
{
struct domainset domain;
cpuset_t mask;
int error;
/*
* If we're replacing on a thread that has not constrained the
* original set we can simply accept the new set.
*/
if (tdset->cs_id != CPUSET_INVALID) {
*nsetp = cpuset_ref(set);
return (0);
}
error = cpuset_setproc_setthread_mask(tdset, set, &mask, &domain);
if (error)
return (error);
return cpuset_shadow(tdset, nsetp, &mask, &domain, freelist,
domainlist);
}
/*
* Handle three cases for updating an entire process.
*
* 1) Set is non-null. This reparents all anonymous sets to the provided
* set and replaces all non-anonymous td_cpusets with the provided set.
* 2) Mask is non-null. This replaces or creates anonymous sets for every
* thread with the existing base as a parent.
* 3) domain is non-null. This creates anonymous sets for every thread
* and replaces the domain set.
*
* This is overly complicated because we can't allocate while holding a
* spinlock and spinlocks must be held while changing and examining thread
* state.
*/
static int
cpuset_setproc(pid_t pid, struct cpuset *set, cpuset_t *mask,
struct domainset *domain)
{
struct setlist freelist;
struct setlist droplist;
struct domainlist domainlist;
struct cpuset *nset;
struct thread *td;
struct proc *p;
int threads;
int nfree;
int error;
/*
* The algorithm requires two passes due to locking considerations.
*
* 1) Lookup the process and acquire the locks in the required order.
* 2) If enough cpusets have not been allocated release the locks and
* allocate them. Loop.
*/
cpuset_freelist_init(&freelist, 1);
domainset_freelist_init(&domainlist, 1);
nfree = 1;
LIST_INIT(&droplist);
nfree = 0;
for (;;) {
error = cpuset_which(CPU_WHICH_PID, pid, &p, &td, &nset);
if (error)
goto out;
if (nfree >= p->p_numthreads)
break;
threads = p->p_numthreads;
PROC_UNLOCK(p);
if (nfree < threads) {
cpuset_freelist_add(&freelist, threads - nfree);
domainset_freelist_add(&domainlist, threads - nfree);
nfree = threads;
}
}
PROC_LOCK_ASSERT(p, MA_OWNED);
/*
* Now that the appropriate locks are held and we have enough cpusets,
* make sure the operation will succeed before applying changes. The
* proc lock prevents td_cpuset from changing between calls.
*/
error = 0;
FOREACH_THREAD_IN_PROC(p, td) {
thread_lock(td);
if (set != NULL)
error = cpuset_setproc_test_setthread(td->td_cpuset,
set);
else
error = cpuset_setproc_test_maskthread(td->td_cpuset,
mask, domain);
thread_unlock(td);
if (error)
goto unlock_out;
}
/*
* Replace each thread's cpuset while using deferred release. We
* must do this because the thread lock must be held while operating
* on the thread and this limits the type of operations allowed.
*/
FOREACH_THREAD_IN_PROC(p, td) {
thread_lock(td);
if (set != NULL)
error = cpuset_setproc_setthread(td->td_cpuset, set,
&nset, &freelist, &domainlist);
else
error = cpuset_setproc_maskthread(td->td_cpuset, mask,
domain, &nset, &freelist, &domainlist);
if (error) {
thread_unlock(td);
break;
}
cpuset_rel_defer(&droplist, cpuset_update_thread(td, nset));
thread_unlock(td);
}
unlock_out:
PROC_UNLOCK(p);
out:
while ((nset = LIST_FIRST(&droplist)) != NULL)
cpuset_rel_complete(nset);
cpuset_freelist_free(&freelist);
domainset_freelist_free(&domainlist);
return (error);
}
static int
bitset_strprint(char *buf, size_t bufsiz, const struct bitset *set, int setlen)
{
size_t bytes;
int i, once;
char *p;
once = 0;
p = buf;
for (i = 0; i < __bitset_words(setlen); i++) {
if (once != 0) {
if (bufsiz < 1)
return (0);
*p = ',';
p++;
bufsiz--;
} else
once = 1;
if (bufsiz < sizeof(__STRING(ULONG_MAX)))
return (0);
bytes = snprintf(p, bufsiz, "%lx", set->__bits[i]);
p += bytes;
bufsiz -= bytes;
}
return (p - buf);
}
static int
bitset_strscan(struct bitset *set, int setlen, const char *buf)
{
int i, ret;
const char *p;
BIT_ZERO(setlen, set);
p = buf;
for (i = 0; i < __bitset_words(setlen); i++) {
if (*p == ',') {
p++;
continue;
}
ret = sscanf(p, "%lx", &set->__bits[i]);
if (ret == 0 || ret == -1)
break;
while (isxdigit(*p))
p++;
}
return (p - buf);
}
Commit the support for removing cpumask_t and replacing it directly with cpuset_t objects. That is going to offer the underlying support for a simple bump of MAXCPU and then support for number of cpus > 32 (as it is today). Right now, cpumask_t is an int, 32 bits on all our supported architecture. cpumask_t on the other side is implemented as an array of longs, and easilly extendible by definition. The architectures touched by this commit are the following: - amd64 - i386 - pc98 - arm - ia64 - XEN while the others are still missing. Userland is believed to be fully converted with the changes contained here. Some technical notes: - This commit may be considered an ABI nop for all the architectures different from amd64 and ia64 (and sparc64 in the future) - per-cpu members, which are now converted to cpuset_t, needs to be accessed avoiding migration, because the size of cpuset_t should be considered unknown - size of cpuset_t objects is different from kernel and userland (this is primirally done in order to leave some more space in userland to cope with KBI extensions). If you need to access kernel cpuset_t from the userland please refer to example in this patch on how to do that correctly (kgdb may be a good source, for example). - Support for other architectures is going to be added soon - Only MAXCPU for amd64 is bumped now The patch has been tested by sbruno and Nicholas Esborn on opteron 4 x 12 pack CPUs. More testing on big SMP is expected to came soon. pluknet tested the patch with his 8-ways on both amd64 and i386. Tested by: pluknet, sbruno, gianni, Nicholas Esborn Reviewed by: jeff, jhb, sbruno
2011-05-05 14:39:14 +00:00
/*
* Return a string representing a valid layout for a cpuset_t object.
* It expects an incoming buffer at least sized as CPUSETBUFSIZ.
*/
char *
cpusetobj_strprint(char *buf, const cpuset_t *set)
{
bitset_strprint(buf, CPUSETBUFSIZ, (const struct bitset *)set,
CPU_SETSIZE);
Commit the support for removing cpumask_t and replacing it directly with cpuset_t objects. That is going to offer the underlying support for a simple bump of MAXCPU and then support for number of cpus > 32 (as it is today). Right now, cpumask_t is an int, 32 bits on all our supported architecture. cpumask_t on the other side is implemented as an array of longs, and easilly extendible by definition. The architectures touched by this commit are the following: - amd64 - i386 - pc98 - arm - ia64 - XEN while the others are still missing. Userland is believed to be fully converted with the changes contained here. Some technical notes: - This commit may be considered an ABI nop for all the architectures different from amd64 and ia64 (and sparc64 in the future) - per-cpu members, which are now converted to cpuset_t, needs to be accessed avoiding migration, because the size of cpuset_t should be considered unknown - size of cpuset_t objects is different from kernel and userland (this is primirally done in order to leave some more space in userland to cope with KBI extensions). If you need to access kernel cpuset_t from the userland please refer to example in this patch on how to do that correctly (kgdb may be a good source, for example). - Support for other architectures is going to be added soon - Only MAXCPU for amd64 is bumped now The patch has been tested by sbruno and Nicholas Esborn on opteron 4 x 12 pack CPUs. More testing on big SMP is expected to came soon. pluknet tested the patch with his 8-ways on both amd64 and i386. Tested by: pluknet, sbruno, gianni, Nicholas Esborn Reviewed by: jeff, jhb, sbruno
2011-05-05 14:39:14 +00:00
return (buf);
}
/*
* Build a valid cpuset_t object from a string representation.
* It expects an incoming buffer at least sized as CPUSETBUFSIZ.
*/
int
cpusetobj_strscan(cpuset_t *set, const char *buf)
{
char p;
if (strlen(buf) > CPUSETBUFSIZ - 1)
return (-1);
p = buf[bitset_strscan((struct bitset *)set, CPU_SETSIZE, buf)];
if (p != '\0')
return (-1);
return (0);
}
/*
* Handle a domainset specifier in the sysctl tree. A poiner to a pointer to
* a domainset is in arg1. If the user specifies a valid domainset the
* pointer is updated.
*
* Format is:
* hex mask word 0,hex mask word 1,...:decimal policy:decimal preferred
*/
int
sysctl_handle_domainset(SYSCTL_HANDLER_ARGS)
{
char buf[DOMAINSETBUFSIZ];
struct domainset *dset;
struct domainset key;
int policy, prefer, error;
char *p;
dset = *(struct domainset **)arg1;
error = 0;
if (dset != NULL) {
p = buf + bitset_strprint(buf, DOMAINSETBUFSIZ,
(const struct bitset *)&dset->ds_mask, DOMAINSET_SETSIZE);
sprintf(p, ":%d:%d", dset->ds_policy, dset->ds_prefer);
} else
sprintf(buf, "<NULL>");
error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
if (error != 0 || req->newptr == NULL)
return (error);
/*
* Read in and validate the string.
*/
memset(&key, 0, sizeof(key));
p = &buf[bitset_strscan((struct bitset *)&key.ds_mask,
DOMAINSET_SETSIZE, buf)];
if (p == buf)
return (EINVAL);
if (sscanf(p, ":%d:%d", &policy, &prefer) != 2)
return (EINVAL);
key.ds_policy = policy;
key.ds_prefer = prefer;
/* Domainset_create() validates the policy.*/
dset = domainset_create(&key);
if (dset == NULL)
return (EINVAL);
*(struct domainset **)arg1 = dset;
return (error);
}
/*
* Apply an anonymous mask or a domain to a single thread.
*/
static int
_cpuset_setthread(lwpid_t id, cpuset_t *mask, struct domainset *domain)
{
struct setlist cpusets;
struct domainlist domainlist;
struct cpuset *nset;
struct cpuset *set;
struct thread *td;
struct proc *p;
int error;
cpuset_freelist_init(&cpusets, 1);
domainset_freelist_init(&domainlist, domain != NULL);
error = cpuset_which(CPU_WHICH_TID, id, &p, &td, &set);
if (error)
goto out;
set = NULL;
thread_lock(td);
error = cpuset_shadow(td->td_cpuset, &nset, mask, domain,
&cpusets, &domainlist);
if (error == 0)
set = cpuset_update_thread(td, nset);
thread_unlock(td);
PROC_UNLOCK(p);
if (set)
cpuset_rel(set);
out:
cpuset_freelist_free(&cpusets);
domainset_freelist_free(&domainlist);
return (error);
}
/*
* Apply an anonymous mask to a single thread.
*/
int
cpuset_setthread(lwpid_t id, cpuset_t *mask)
{
return _cpuset_setthread(id, mask, NULL);
}
/*
* Apply new cpumask to the ithread.
*/
int
cpuset_setithread(lwpid_t id, int cpu)
{
cpuset_t mask;
CPU_ZERO(&mask);
if (cpu == NOCPU)
CPU_COPY(cpuset_root, &mask);
else
CPU_SET(cpu, &mask);
return _cpuset_setthread(id, &mask, NULL);
}
/*
* Initialize static domainsets after NUMA information is available. This is
* called before memory allocators are initialized.
*/
void
domainset_init(void)
{
struct domainset *dset;
int i;
dset = &domainset_roundrobin;
DOMAINSET_COPY(&all_domains, &dset->ds_mask);
dset->ds_policy = DOMAINSET_POLICY_ROUNDROBIN;
dset->ds_prefer = -1;
_domainset_create(dset, NULL);
for (i = 0; i < vm_ndomains; i++) {
dset = &domainset_fixed[i];
DOMAINSET_ZERO(&dset->ds_mask);
DOMAINSET_SET(i, &dset->ds_mask);
dset->ds_policy = DOMAINSET_POLICY_ROUNDROBIN;
_domainset_create(dset, NULL);
dset = &domainset_prefer[i];
DOMAINSET_COPY(&all_domains, &dset->ds_mask);
dset->ds_policy = DOMAINSET_POLICY_PREFER;
dset->ds_prefer = i;
_domainset_create(dset, NULL);
}
}
/*
* Create the domainset for cpuset 0, 1 and cpuset 2.
*/
void
domainset_zero(void)
{
struct domainset *dset, *tmp;
mtx_init(&cpuset_lock, "cpuset", NULL, MTX_SPIN | MTX_RECURSE);
dset = &domainset0;
DOMAINSET_COPY(&all_domains, &dset->ds_mask);
dset->ds_policy = DOMAINSET_POLICY_FIRSTTOUCH;
dset->ds_prefer = -1;
curthread->td_domain.dr_policy = _domainset_create(dset, NULL);
domainset_copy(dset, &domainset2);
domainset2.ds_policy = DOMAINSET_POLICY_INTERLEAVE;
kernel_object->domain.dr_policy = _domainset_create(&domainset2, NULL);
/* Remove empty domains from the global policies. */
LIST_FOREACH_SAFE(dset, &cpuset_domains, ds_link, tmp)
if (domainset_empty_vm(dset))
LIST_REMOVE(dset, ds_link);
}
/*
* Creates system-wide cpusets and the cpuset for thread0 including three
* sets:
*
* 0 - The root set which should represent all valid processors in the
* system. It is initially created with a mask of all processors
* because we don't know what processors are valid until cpuset_init()
* runs. This set is immutable.
* 1 - The default set which all processes are a member of until changed.
* This allows an administrator to move all threads off of given cpus to
* dedicate them to high priority tasks or save power etc.
* 2 - The kernel set which allows restriction and policy to be applied only
* to kernel threads and the kernel_object.
*/
struct cpuset *
cpuset_thread0(void)
{
struct cpuset *set;
int i;
2018-05-19 05:07:31 +00:00
int error __unused;
cpuset_zone = uma_zcreate("cpuset", sizeof(struct cpuset), NULL, NULL,
NULL, NULL, UMA_ALIGN_CACHE, 0);
domainset_zone = uma_zcreate("domainset", sizeof(struct domainset),
NULL, NULL, NULL, NULL, UMA_ALIGN_CACHE, 0);
/*
* Create the root system set (0) for the whole machine. Doesn't use
* cpuset_create() due to NULL parent.
*/
set = uma_zalloc(cpuset_zone, M_WAITOK | M_ZERO);
CPU_COPY(&all_cpus, &set->cs_mask);
LIST_INIT(&set->cs_children);
LIST_INSERT_HEAD(&cpuset_ids, set, cs_link);
set->cs_ref = 1;
set->cs_flags = CPU_SET_ROOT | CPU_SET_RDONLY;
set->cs_domain = &domainset0;
cpuset_zero = set;
cpuset_root = &set->cs_mask;
/*
* Now derive a default (1), modifiable set from that to give out.
*/
set = uma_zalloc(cpuset_zone, M_WAITOK | M_ZERO);
2018-05-19 05:07:31 +00:00
error = _cpuset_create(set, cpuset_zero, NULL, NULL, 1);
KASSERT(error == 0, ("Error creating default set: %d\n", error));
cpuset_default = set;
/*
* Create the kernel set (2).
*/
set = uma_zalloc(cpuset_zone, M_WAITOK | M_ZERO);
2018-05-19 05:07:31 +00:00
error = _cpuset_create(set, cpuset_zero, NULL, NULL, 2);
KASSERT(error == 0, ("Error creating kernel set: %d\n", error));
set->cs_domain = &domainset2;
cpuset_kernel = set;
/*
* Initialize the unit allocator. 0 and 1 are allocated above.
*/
cpuset_unr = new_unrhdr(3, INT_MAX, NULL);
/*
* If MD code has not initialized per-domain cpusets, place all
* CPUs in domain 0.
*/
for (i = 0; i < MAXMEMDOM; i++)
if (!CPU_EMPTY(&cpuset_domain[i]))
goto domains_set;
CPU_COPY(&all_cpus, &cpuset_domain[0]);
domains_set:
return (cpuset_default);
}
void
cpuset_kernthread(struct thread *td)
{
struct cpuset *set;
thread_lock(td);
set = td->td_cpuset;
td->td_cpuset = cpuset_ref(cpuset_kernel);
thread_unlock(td);
cpuset_rel(set);
}
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
/*
* Create a cpuset, which would be cpuset_create() but
* mark the new 'set' as root.
*
* We are not going to reparent the td to it. Use cpuset_setproc_update_set()
* for that.
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
*
* In case of no error, returns the set in *setp locked with a reference.
*/
int
cpuset_create_root(struct prison *pr, struct cpuset **setp)
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
{
struct cpuset *set;
int error;
KASSERT(pr != NULL, ("[%s:%d] invalid pr", __func__, __LINE__));
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
KASSERT(setp != NULL, ("[%s:%d] invalid setp", __func__, __LINE__));
error = cpuset_create(setp, pr->pr_cpuset, &pr->pr_cpuset->cs_mask);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
if (error)
return (error);
KASSERT(*setp != NULL, ("[%s:%d] cpuset_create returned invalid data",
__func__, __LINE__));
/* Mark the set as root. */
set = *setp;
set->cs_flags |= CPU_SET_ROOT;
return (0);
}
int
cpuset_setproc_update_set(struct proc *p, struct cpuset *set)
{
int error;
KASSERT(p != NULL, ("[%s:%d] invalid proc", __func__, __LINE__));
KASSERT(set != NULL, ("[%s:%d] invalid set", __func__, __LINE__));
cpuset_ref(set);
error = cpuset_setproc(p->p_pid, set, NULL, NULL);
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
if (error)
return (error);
cpuset_rel(set);
return (0);
}
#ifndef _SYS_SYSPROTO_H_
struct cpuset_args {
cpusetid_t *setid;
};
#endif
int
sys_cpuset(struct thread *td, struct cpuset_args *uap)
{
struct cpuset *root;
struct cpuset *set;
int error;
thread_lock(td);
root = cpuset_refroot(td->td_cpuset);
thread_unlock(td);
error = cpuset_create(&set, root, &root->cs_mask);
cpuset_rel(root);
if (error)
return (error);
error = copyout(&set->cs_id, uap->setid, sizeof(set->cs_id));
if (error == 0)
error = cpuset_setproc(-1, set, NULL, NULL);
cpuset_rel(set);
return (error);
}
#ifndef _SYS_SYSPROTO_H_
struct cpuset_setid_args {
cpuwhich_t which;
id_t id;
cpusetid_t setid;
};
#endif
int
sys_cpuset_setid(struct thread *td, struct cpuset_setid_args *uap)
{
return (kern_cpuset_setid(td, uap->which, uap->id, uap->setid));
}
int
kern_cpuset_setid(struct thread *td, cpuwhich_t which,
id_t id, cpusetid_t setid)
{
struct cpuset *set;
int error;
/*
* Presently we only support per-process sets.
*/
if (which != CPU_WHICH_PID)
return (EINVAL);
set = cpuset_lookup(setid, td);
if (set == NULL)
return (ESRCH);
error = cpuset_setproc(id, set, NULL, NULL);
cpuset_rel(set);
return (error);
}
#ifndef _SYS_SYSPROTO_H_
struct cpuset_getid_args {
cpulevel_t level;
cpuwhich_t which;
id_t id;
cpusetid_t *setid;
2011-12-05 10:34:52 +00:00
};
#endif
int
sys_cpuset_getid(struct thread *td, struct cpuset_getid_args *uap)
{
return (kern_cpuset_getid(td, uap->level, uap->which, uap->id,
uap->setid));
}
int
kern_cpuset_getid(struct thread *td, cpulevel_t level, cpuwhich_t which,
id_t id, cpusetid_t *setid)
{
struct cpuset *nset;
struct cpuset *set;
struct thread *ttd;
struct proc *p;
cpusetid_t tmpid;
int error;
if (level == CPU_LEVEL_WHICH && which != CPU_WHICH_CPUSET)
return (EINVAL);
error = cpuset_which(which, id, &p, &ttd, &set);
if (error)
return (error);
switch (which) {
case CPU_WHICH_TID:
case CPU_WHICH_PID:
thread_lock(ttd);
set = cpuset_refbase(ttd->td_cpuset);
thread_unlock(ttd);
PROC_UNLOCK(p);
break;
case CPU_WHICH_CPUSET:
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case CPU_WHICH_JAIL:
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_DOMAIN:
return (EINVAL);
}
switch (level) {
case CPU_LEVEL_ROOT:
nset = cpuset_refroot(set);
cpuset_rel(set);
set = nset;
break;
case CPU_LEVEL_CPUSET:
break;
case CPU_LEVEL_WHICH:
break;
}
tmpid = set->cs_id;
cpuset_rel(set);
if (error == 0)
error = copyout(&tmpid, setid, sizeof(tmpid));
return (error);
}
#ifndef _SYS_SYSPROTO_H_
struct cpuset_getaffinity_args {
cpulevel_t level;
cpuwhich_t which;
id_t id;
size_t cpusetsize;
cpuset_t *mask;
};
#endif
int
sys_cpuset_getaffinity(struct thread *td, struct cpuset_getaffinity_args *uap)
{
return (kern_cpuset_getaffinity(td, uap->level, uap->which,
uap->id, uap->cpusetsize, uap->mask));
}
int
kern_cpuset_getaffinity(struct thread *td, cpulevel_t level, cpuwhich_t which,
id_t id, size_t cpusetsize, cpuset_t *maskp)
{
struct thread *ttd;
struct cpuset *nset;
struct cpuset *set;
struct proc *p;
cpuset_t *mask;
int error;
size_t size;
if (cpusetsize < sizeof(cpuset_t) || cpusetsize > CPU_MAXSIZE / NBBY)
return (ERANGE);
/* In Capability mode, you can only get your own CPU set. */
if (IN_CAPABILITY_MODE(td)) {
if (level != CPU_LEVEL_WHICH)
return (ECAPMODE);
if (which != CPU_WHICH_TID && which != CPU_WHICH_PID)
return (ECAPMODE);
if (id != -1)
return (ECAPMODE);
}
size = cpusetsize;
mask = malloc(size, M_TEMP, M_WAITOK | M_ZERO);
error = cpuset_which(which, id, &p, &ttd, &set);
if (error)
goto out;
switch (level) {
case CPU_LEVEL_ROOT:
case CPU_LEVEL_CPUSET:
switch (which) {
case CPU_WHICH_TID:
case CPU_WHICH_PID:
thread_lock(ttd);
set = cpuset_ref(ttd->td_cpuset);
thread_unlock(ttd);
break;
case CPU_WHICH_CPUSET:
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case CPU_WHICH_JAIL:
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
case CPU_WHICH_DOMAIN:
error = EINVAL;
goto out;
}
if (level == CPU_LEVEL_ROOT)
nset = cpuset_refroot(set);
else
nset = cpuset_refbase(set);
CPU_COPY(&nset->cs_mask, mask);
cpuset_rel(nset);
break;
case CPU_LEVEL_WHICH:
switch (which) {
case CPU_WHICH_TID:
thread_lock(ttd);
CPU_COPY(&ttd->td_cpuset->cs_mask, mask);
thread_unlock(ttd);
break;
case CPU_WHICH_PID:
FOREACH_THREAD_IN_PROC(p, ttd) {
thread_lock(ttd);
CPU_OR(mask, &ttd->td_cpuset->cs_mask);
thread_unlock(ttd);
}
break;
case CPU_WHICH_CPUSET:
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case CPU_WHICH_JAIL:
CPU_COPY(&set->cs_mask, mask);
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
error = intr_getaffinity(id, which, mask);
break;
case CPU_WHICH_DOMAIN:
if (id < 0 || id >= MAXMEMDOM)
error = ESRCH;
else
CPU_COPY(&cpuset_domain[id], mask);
break;
}
break;
default:
error = EINVAL;
break;
}
if (set)
cpuset_rel(set);
if (p)
PROC_UNLOCK(p);
if (error == 0)
error = copyout(mask, maskp, size);
out:
free(mask, M_TEMP);
return (error);
}
#ifndef _SYS_SYSPROTO_H_
struct cpuset_setaffinity_args {
cpulevel_t level;
cpuwhich_t which;
id_t id;
size_t cpusetsize;
const cpuset_t *mask;
};
#endif
int
sys_cpuset_setaffinity(struct thread *td, struct cpuset_setaffinity_args *uap)
{
return (kern_cpuset_setaffinity(td, uap->level, uap->which,
uap->id, uap->cpusetsize, uap->mask));
}
int
kern_cpuset_setaffinity(struct thread *td, cpulevel_t level, cpuwhich_t which,
id_t id, size_t cpusetsize, const cpuset_t *maskp)
{
struct cpuset *nset;
struct cpuset *set;
struct thread *ttd;
struct proc *p;
cpuset_t *mask;
int error;
if (cpusetsize < sizeof(cpuset_t) || cpusetsize > CPU_MAXSIZE / NBBY)
return (ERANGE);
/* In Capability mode, you can only set your own CPU set. */
if (IN_CAPABILITY_MODE(td)) {
if (level != CPU_LEVEL_WHICH)
return (ECAPMODE);
if (which != CPU_WHICH_TID && which != CPU_WHICH_PID)
return (ECAPMODE);
if (id != -1)
return (ECAPMODE);
}
mask = malloc(cpusetsize, M_TEMP, M_WAITOK | M_ZERO);
error = copyin(maskp, mask, cpusetsize);
if (error)
goto out;
/*
* Verify that no high bits are set.
*/
if (cpusetsize > sizeof(cpuset_t)) {
char *end;
char *cp;
end = cp = (char *)&mask->__bits;
end += cpusetsize;
cp += sizeof(cpuset_t);
while (cp != end)
if (*cp++ != 0) {
error = EINVAL;
goto out;
}
}
switch (level) {
case CPU_LEVEL_ROOT:
case CPU_LEVEL_CPUSET:
error = cpuset_which(which, id, &p, &ttd, &set);
if (error)
break;
switch (which) {
case CPU_WHICH_TID:
case CPU_WHICH_PID:
thread_lock(ttd);
set = cpuset_ref(ttd->td_cpuset);
thread_unlock(ttd);
PROC_UNLOCK(p);
break;
case CPU_WHICH_CPUSET:
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case CPU_WHICH_JAIL:
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
case CPU_WHICH_DOMAIN:
error = EINVAL;
goto out;
}
if (level == CPU_LEVEL_ROOT)
nset = cpuset_refroot(set);
else
nset = cpuset_refbase(set);
error = cpuset_modify(nset, mask);
cpuset_rel(nset);
cpuset_rel(set);
break;
case CPU_LEVEL_WHICH:
switch (which) {
case CPU_WHICH_TID:
error = cpuset_setthread(id, mask);
break;
case CPU_WHICH_PID:
error = cpuset_setproc(id, NULL, mask, NULL);
break;
case CPU_WHICH_CPUSET:
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
case CPU_WHICH_JAIL:
error = cpuset_which(which, id, &p, &ttd, &set);
if (error == 0) {
error = cpuset_modify(set, mask);
cpuset_rel(set);
}
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
error = intr_setaffinity(id, which, mask);
break;
default:
error = EINVAL;
break;
}
break;
default:
error = EINVAL;
break;
}
out:
free(mask, M_TEMP);
return (error);
}
#ifndef _SYS_SYSPROTO_H_
struct cpuset_getdomain_args {
cpulevel_t level;
cpuwhich_t which;
id_t id;
size_t domainsetsize;
domainset_t *mask;
int *policy;
};
#endif
int
sys_cpuset_getdomain(struct thread *td, struct cpuset_getdomain_args *uap)
{
return (kern_cpuset_getdomain(td, uap->level, uap->which,
uap->id, uap->domainsetsize, uap->mask, uap->policy));
}
int
kern_cpuset_getdomain(struct thread *td, cpulevel_t level, cpuwhich_t which,
id_t id, size_t domainsetsize, domainset_t *maskp, int *policyp)
{
struct domainset outset;
struct thread *ttd;
struct cpuset *nset;
struct cpuset *set;
struct domainset *dset;
struct proc *p;
domainset_t *mask;
int error;
if (domainsetsize < sizeof(domainset_t) ||
domainsetsize > DOMAINSET_MAXSIZE / NBBY)
return (ERANGE);
/* In Capability mode, you can only get your own domain set. */
if (IN_CAPABILITY_MODE(td)) {
if (level != CPU_LEVEL_WHICH)
return (ECAPMODE);
if (which != CPU_WHICH_TID && which != CPU_WHICH_PID)
return (ECAPMODE);
if (id != -1)
return (ECAPMODE);
}
mask = malloc(domainsetsize, M_TEMP, M_WAITOK | M_ZERO);
bzero(&outset, sizeof(outset));
error = cpuset_which(which, id, &p, &ttd, &set);
if (error)
goto out;
switch (level) {
case CPU_LEVEL_ROOT:
case CPU_LEVEL_CPUSET:
switch (which) {
case CPU_WHICH_TID:
case CPU_WHICH_PID:
thread_lock(ttd);
set = cpuset_ref(ttd->td_cpuset);
thread_unlock(ttd);
break;
case CPU_WHICH_CPUSET:
case CPU_WHICH_JAIL:
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
case CPU_WHICH_DOMAIN:
error = EINVAL;
goto out;
}
if (level == CPU_LEVEL_ROOT)
nset = cpuset_refroot(set);
else
nset = cpuset_refbase(set);
domainset_copy(nset->cs_domain, &outset);
cpuset_rel(nset);
break;
case CPU_LEVEL_WHICH:
switch (which) {
case CPU_WHICH_TID:
thread_lock(ttd);
domainset_copy(ttd->td_cpuset->cs_domain, &outset);
thread_unlock(ttd);
break;
case CPU_WHICH_PID:
FOREACH_THREAD_IN_PROC(p, ttd) {
thread_lock(ttd);
dset = ttd->td_cpuset->cs_domain;
/* Show all domains in the proc. */
DOMAINSET_OR(&outset.ds_mask, &dset->ds_mask);
/* Last policy wins. */
outset.ds_policy = dset->ds_policy;
outset.ds_prefer = dset->ds_prefer;
thread_unlock(ttd);
}
break;
case CPU_WHICH_CPUSET:
case CPU_WHICH_JAIL:
domainset_copy(set->cs_domain, &outset);
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
case CPU_WHICH_DOMAIN:
error = EINVAL;
break;
}
break;
default:
error = EINVAL;
break;
}
if (set)
cpuset_rel(set);
if (p)
PROC_UNLOCK(p);
/*
* Translate prefer into a set containing only the preferred domain,
* not the entire fallback set.
*/
if (outset.ds_policy == DOMAINSET_POLICY_PREFER) {
DOMAINSET_ZERO(&outset.ds_mask);
DOMAINSET_SET(outset.ds_prefer, &outset.ds_mask);
}
DOMAINSET_COPY(&outset.ds_mask, mask);
if (error == 0)
error = copyout(mask, maskp, domainsetsize);
if (error == 0)
if (suword32(policyp, outset.ds_policy) != 0)
error = EFAULT;
out:
free(mask, M_TEMP);
return (error);
}
#ifndef _SYS_SYSPROTO_H_
struct cpuset_setdomain_args {
cpulevel_t level;
cpuwhich_t which;
id_t id;
size_t domainsetsize;
domainset_t *mask;
int policy;
};
#endif
int
sys_cpuset_setdomain(struct thread *td, struct cpuset_setdomain_args *uap)
{
return (kern_cpuset_setdomain(td, uap->level, uap->which,
uap->id, uap->domainsetsize, uap->mask, uap->policy));
}
int
kern_cpuset_setdomain(struct thread *td, cpulevel_t level, cpuwhich_t which,
id_t id, size_t domainsetsize, const domainset_t *maskp, int policy)
{
struct cpuset *nset;
struct cpuset *set;
struct thread *ttd;
struct proc *p;
struct domainset domain;
domainset_t *mask;
int error;
if (domainsetsize < sizeof(domainset_t) ||
domainsetsize > DOMAINSET_MAXSIZE / NBBY)
return (ERANGE);
if (policy <= DOMAINSET_POLICY_INVALID ||
policy > DOMAINSET_POLICY_MAX)
return (EINVAL);
/* In Capability mode, you can only set your own CPU set. */
if (IN_CAPABILITY_MODE(td)) {
if (level != CPU_LEVEL_WHICH)
return (ECAPMODE);
if (which != CPU_WHICH_TID && which != CPU_WHICH_PID)
return (ECAPMODE);
if (id != -1)
return (ECAPMODE);
}
memset(&domain, 0, sizeof(domain));
mask = malloc(domainsetsize, M_TEMP, M_WAITOK | M_ZERO);
error = copyin(maskp, mask, domainsetsize);
if (error)
goto out;
/*
* Verify that no high bits are set.
*/
if (domainsetsize > sizeof(domainset_t)) {
char *end;
char *cp;
end = cp = (char *)&mask->__bits;
end += domainsetsize;
cp += sizeof(domainset_t);
while (cp != end)
if (*cp++ != 0) {
error = EINVAL;
goto out;
}
}
DOMAINSET_COPY(mask, &domain.ds_mask);
domain.ds_policy = policy;
/*
* Sanitize the provided mask.
*/
if (!DOMAINSET_SUBSET(&all_domains, &domain.ds_mask)) {
error = EINVAL;
goto out;
}
/* Translate preferred policy into a mask and fallback. */
if (policy == DOMAINSET_POLICY_PREFER) {
/* Only support a single preferred domain. */
if (DOMAINSET_COUNT(&domain.ds_mask) != 1) {
error = EINVAL;
goto out;
}
domain.ds_prefer = DOMAINSET_FFS(&domain.ds_mask) - 1;
/* This will be constrained by domainset_shadow(). */
DOMAINSET_COPY(&all_domains, &domain.ds_mask);
}
/*
* When given an impossible policy, fall back to interleaving
* across all domains.
*/
if (domainset_empty_vm(&domain))
domainset_copy(&domainset2, &domain);
switch (level) {
case CPU_LEVEL_ROOT:
case CPU_LEVEL_CPUSET:
error = cpuset_which(which, id, &p, &ttd, &set);
if (error)
break;
switch (which) {
case CPU_WHICH_TID:
case CPU_WHICH_PID:
thread_lock(ttd);
set = cpuset_ref(ttd->td_cpuset);
thread_unlock(ttd);
PROC_UNLOCK(p);
break;
case CPU_WHICH_CPUSET:
case CPU_WHICH_JAIL:
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
case CPU_WHICH_DOMAIN:
error = EINVAL;
goto out;
}
if (level == CPU_LEVEL_ROOT)
nset = cpuset_refroot(set);
else
nset = cpuset_refbase(set);
error = cpuset_modify_domain(nset, &domain);
cpuset_rel(nset);
cpuset_rel(set);
break;
case CPU_LEVEL_WHICH:
switch (which) {
case CPU_WHICH_TID:
error = _cpuset_setthread(id, NULL, &domain);
break;
case CPU_WHICH_PID:
error = cpuset_setproc(id, NULL, NULL, &domain);
break;
case CPU_WHICH_CPUSET:
case CPU_WHICH_JAIL:
error = cpuset_which(which, id, &p, &ttd, &set);
if (error == 0) {
error = cpuset_modify_domain(set, &domain);
cpuset_rel(set);
}
break;
case CPU_WHICH_IRQ:
case CPU_WHICH_INTRHANDLER:
case CPU_WHICH_ITHREAD:
default:
error = EINVAL;
break;
}
break;
default:
error = EINVAL;
break;
}
out:
free(mask, M_TEMP);
return (error);
}
#ifdef DDB
static void
ddb_display_bitset(const struct bitset *set, int size)
{
int bit, once;
for (once = 0, bit = 0; bit < size; bit++) {
if (CPU_ISSET(bit, set)) {
if (once == 0) {
db_printf("%d", bit);
once = 1;
} else
db_printf(",%d", bit);
}
}
if (once == 0)
db_printf("<none>");
}
void
ddb_display_cpuset(const cpuset_t *set)
{
ddb_display_bitset((const struct bitset *)set, CPU_SETSIZE);
}
static void
ddb_display_domainset(const domainset_t *set)
{
ddb_display_bitset((const struct bitset *)set, DOMAINSET_SETSIZE);
}
DB_SHOW_COMMAND(cpusets, db_show_cpusets)
{
struct cpuset *set;
LIST_FOREACH(set, &cpuset_ids, cs_link) {
db_printf("set=%p id=%-6u ref=%-6d flags=0x%04x parent id=%d\n",
set, set->cs_id, set->cs_ref, set->cs_flags,
(set->cs_parent != NULL) ? set->cs_parent->cs_id : 0);
db_printf(" cpu mask=");
ddb_display_cpuset(&set->cs_mask);
db_printf("\n");
db_printf(" domain policy %d prefer %d mask=",
set->cs_domain->ds_policy, set->cs_domain->ds_prefer);
ddb_display_domainset(&set->cs_domain->ds_mask);
db_printf("\n");
if (db_pager_quit)
break;
}
}
DB_SHOW_COMMAND(domainsets, db_show_domainsets)
{
struct domainset *set;
LIST_FOREACH(set, &cpuset_domains, ds_link) {
db_printf("set=%p policy %d prefer %d cnt %d\n",
set, set->ds_policy, set->ds_prefer, set->ds_cnt);
db_printf(" mask =");
ddb_display_domainset(&set->ds_mask);
db_printf("\n");
}
}
#endif /* DDB */