freebsd-nq/module/zfs/dnode.c

2043 lines
56 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2012, 2015 by Delphix. All rights reserved.
* Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
2008-11-20 20:01:55 +00:00
*/
#include <sys/zfs_context.h>
#include <sys/dbuf.h>
#include <sys/dnode.h>
#include <sys/dmu.h>
#include <sys/dmu_impl.h>
#include <sys/dmu_tx.h>
#include <sys/dmu_objset.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_dataset.h>
#include <sys/spa.h>
#include <sys/zio.h>
#include <sys/dmu_zfetch.h>
#include <sys/range_tree.h>
Remove duplicate typedefs from trace.h Older versions of GCC (e.g. GCC 4.4.7 on RHEL6) do not allow duplicate typedef declarations with the same type. The trace.h header contains some typedefs to avoid 'unknown type' errors for C files that haven't declared the type in question. But this causes build failures for C files that have already declared the type. Newer versions of GCC (e.g. v4.6) allow duplicate typedefs with the same type unless pedantic error checking is in force. To support the older versions we need to remove the duplicate typedefs. Removal of the typedefs means we can't built tracepoints code using those types unless the required headers have been included. To facilitate this, all tracepoint event declarations have been moved out of trace.h into separate headers. Each new header is explicitly included from the C file that uses the events defined therein. The trace.h header is still indirectly included form zfs_context.h and provides the implementation of the dprintf(), dbgmsg(), and SET_ERROR() interfaces. This makes those interfaces readily available throughout the code base. The macros that redefine DTRACE_PROBE* to use Linux tracepoints are also still provided by trace.h, so it is a prerequisite for the other trace_*.h headers. These new Linux implementation-specific headers do introduce a small divergence from upstream ZFS in several core C files, but this should not present a significant maintenance burden. Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #2953
2014-12-13 02:07:39 +00:00
#include <sys/trace_dnode.h>
2008-11-20 20:01:55 +00:00
static kmem_cache_t *dnode_cache;
/*
* Define DNODE_STATS to turn on statistic gathering. By default, it is only
* turned on when DEBUG is also defined.
*/
#ifdef DEBUG
#define DNODE_STATS
#endif /* DEBUG */
#ifdef DNODE_STATS
#define DNODE_STAT_ADD(stat) ((stat)++)
#else
#define DNODE_STAT_ADD(stat) /* nothing */
#endif /* DNODE_STATS */
2008-11-20 20:01:55 +00:00
ASSERTV(static dnode_phys_t dnode_phys_zero);
2008-11-20 20:01:55 +00:00
int zfs_default_bs = SPA_MINBLOCKSHIFT;
int zfs_default_ibs = DN_MAX_INDBLKSHIFT;
#ifdef _KERNEL
static kmem_cbrc_t dnode_move(void *, void *, size_t, void *);
#endif /* _KERNEL */
static int
dbuf_compare(const void *x1, const void *x2)
{
const dmu_buf_impl_t *d1 = x1;
const dmu_buf_impl_t *d2 = x2;
if (d1->db_level < d2->db_level) {
return (-1);
}
if (d1->db_level > d2->db_level) {
return (1);
}
if (d1->db_blkid < d2->db_blkid) {
return (-1);
}
if (d1->db_blkid > d2->db_blkid) {
return (1);
}
if (d1->db_state == DB_SEARCH) {
ASSERT3S(d2->db_state, !=, DB_SEARCH);
return (-1);
} else if (d2->db_state == DB_SEARCH) {
ASSERT3S(d1->db_state, !=, DB_SEARCH);
return (1);
}
if ((uintptr_t)d1 < (uintptr_t)d2) {
return (-1);
}
if ((uintptr_t)d1 > (uintptr_t)d2) {
return (1);
}
return (0);
}
2008-11-20 20:01:55 +00:00
/* ARGSUSED */
static int
dnode_cons(void *arg, void *unused, int kmflag)
{
dnode_t *dn = arg;
int i;
2008-11-20 20:01:55 +00:00
Identify locks flagged by lockdep When running a kernel with CONFIG_LOCKDEP=y, lockdep reports possible recursive locking in some cases and possible circular locking dependency in others, within the SPL and ZFS modules. This patch uses a mutex type defined in SPL, MUTEX_NOLOCKDEP, to mark such mutexes when they are initialized. This mutex type causes attempts to take or release those locks to be wrapped in lockdep_off() and lockdep_on() calls to silence the dependency checker and allow the use of lock_stats to examine contention. For RW locks, it uses an analogous lock type, RW_NOLOCKDEP. The goal is that these locks are ultimately changed back to type MUTEX_DEFAULT or RW_DEFAULT, after the locks are annotated to reflect their relationship (e.g. z_name_lock below) or any real problem with the lock dependencies are fixed. Some of the affected locks are: tc_open_lock: ============= This is an array of locks, all with same name, which txg_quiesce must take all of in order to move txg to next state. All default to the same lockdep class, and so to lockdep appears recursive. zp->z_name_lock: ================ In zfs_rmdir, dzp = znode for the directory (input to zfs_dirent_lock) zp = znode for the entry being removed (output of zfs_dirent_lock) zfs_rmdir()->zfs_dirent_lock() takes z_name_lock in dzp zfs_rmdir() takes z_name_lock in zp Since both dzp and zp are type znode_t, the locks have the same default class, and lockdep considers it a possible recursive lock attempt. l->l_rwlock: ============ zap_expand_leaf() sometimes creates two new zap leaf structures, via these call paths: zap_deref_leaf()->zap_get_leaf_byblk()->zap_leaf_open() zap_expand_leaf()->zap_create_leaf()->zap_expand_leaf()->zap_create_leaf() Because both zap_leaf_open() and zap_create_leaf() initialize l->l_rwlock in their (separate) leaf structures, the lockdep class is the same, and the linux kernel believes these might both be the same lock, and emits a possible recursive lock warning. Signed-off-by: Olaf Faaland <faaland1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3895
2015-10-15 20:08:27 +00:00
rw_init(&dn->dn_struct_rwlock, NULL, RW_NOLOCKDEP, NULL);
2008-11-20 20:01:55 +00:00
mutex_init(&dn->dn_mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&dn->dn_dbufs_mtx, NULL, MUTEX_DEFAULT, NULL);
2009-01-15 21:59:39 +00:00
cv_init(&dn->dn_notxholds, NULL, CV_DEFAULT, NULL);
/*
* Every dbuf has a reference, and dropping a tracked reference is
* O(number of references), so don't track dn_holds.
*/
refcount_create_untracked(&dn->dn_holds);
2008-11-20 20:01:55 +00:00
refcount_create(&dn->dn_tx_holds);
list_link_init(&dn->dn_link);
bzero(&dn->dn_next_nblkptr[0], sizeof (dn->dn_next_nblkptr));
bzero(&dn->dn_next_nlevels[0], sizeof (dn->dn_next_nlevels));
bzero(&dn->dn_next_indblkshift[0], sizeof (dn->dn_next_indblkshift));
bzero(&dn->dn_next_bonustype[0], sizeof (dn->dn_next_bonustype));
bzero(&dn->dn_rm_spillblk[0], sizeof (dn->dn_rm_spillblk));
bzero(&dn->dn_next_bonuslen[0], sizeof (dn->dn_next_bonuslen));
bzero(&dn->dn_next_blksz[0], sizeof (dn->dn_next_blksz));
2008-11-20 20:01:55 +00:00
for (i = 0; i < TXG_SIZE; i++) {
list_link_init(&dn->dn_dirty_link[i]);
dn->dn_free_ranges[i] = NULL;
2008-11-20 20:01:55 +00:00
list_create(&dn->dn_dirty_records[i],
sizeof (dbuf_dirty_record_t),
offsetof(dbuf_dirty_record_t, dr_dirty_node));
}
dn->dn_allocated_txg = 0;
dn->dn_free_txg = 0;
dn->dn_assigned_txg = 0;
dn->dn_dirtyctx = 0;
dn->dn_dirtyctx_firstset = NULL;
dn->dn_bonus = NULL;
dn->dn_have_spill = B_FALSE;
dn->dn_zio = NULL;
dn->dn_oldused = 0;
dn->dn_oldflags = 0;
dn->dn_olduid = 0;
dn->dn_oldgid = 0;
dn->dn_newuid = 0;
dn->dn_newgid = 0;
dn->dn_id_flags = 0;
dn->dn_dbufs_count = 0;
dn->dn_unlisted_l0_blkid = 0;
avl_create(&dn->dn_dbufs, dbuf_compare, sizeof (dmu_buf_impl_t),
2008-11-20 20:01:55 +00:00
offsetof(dmu_buf_impl_t, db_link));
dn->dn_moved = 0;
2008-11-20 20:01:55 +00:00
return (0);
}
/* ARGSUSED */
static void
dnode_dest(void *arg, void *unused)
{
int i;
dnode_t *dn = arg;
rw_destroy(&dn->dn_struct_rwlock);
mutex_destroy(&dn->dn_mtx);
mutex_destroy(&dn->dn_dbufs_mtx);
2009-01-15 21:59:39 +00:00
cv_destroy(&dn->dn_notxholds);
2008-11-20 20:01:55 +00:00
refcount_destroy(&dn->dn_holds);
refcount_destroy(&dn->dn_tx_holds);
ASSERT(!list_link_active(&dn->dn_link));
2008-11-20 20:01:55 +00:00
for (i = 0; i < TXG_SIZE; i++) {
ASSERT(!list_link_active(&dn->dn_dirty_link[i]));
ASSERT3P(dn->dn_free_ranges[i], ==, NULL);
2008-11-20 20:01:55 +00:00
list_destroy(&dn->dn_dirty_records[i]);
ASSERT0(dn->dn_next_nblkptr[i]);
ASSERT0(dn->dn_next_nlevels[i]);
ASSERT0(dn->dn_next_indblkshift[i]);
ASSERT0(dn->dn_next_bonustype[i]);
ASSERT0(dn->dn_rm_spillblk[i]);
ASSERT0(dn->dn_next_bonuslen[i]);
ASSERT0(dn->dn_next_blksz[i]);
2008-11-20 20:01:55 +00:00
}
ASSERT0(dn->dn_allocated_txg);
ASSERT0(dn->dn_free_txg);
ASSERT0(dn->dn_assigned_txg);
ASSERT0(dn->dn_dirtyctx);
ASSERT3P(dn->dn_dirtyctx_firstset, ==, NULL);
ASSERT3P(dn->dn_bonus, ==, NULL);
ASSERT(!dn->dn_have_spill);
ASSERT3P(dn->dn_zio, ==, NULL);
ASSERT0(dn->dn_oldused);
ASSERT0(dn->dn_oldflags);
ASSERT0(dn->dn_olduid);
ASSERT0(dn->dn_oldgid);
ASSERT0(dn->dn_newuid);
ASSERT0(dn->dn_newgid);
ASSERT0(dn->dn_id_flags);
ASSERT0(dn->dn_dbufs_count);
ASSERT0(dn->dn_unlisted_l0_blkid);
avl_destroy(&dn->dn_dbufs);
2008-11-20 20:01:55 +00:00
}
void
dnode_init(void)
{
ASSERT(dnode_cache == NULL);
Improve meta data performance Profiling the system during meta data intensive workloads such as creating/removing millions of files, revealed that the system was cpu bound. A large fraction of that cpu time was being spent waiting on the virtual address space spin lock. It turns out this was caused by certain heavily used kmem_caches being backed by virtual memory. By default a kmem_cache will dynamically determine the type of memory used based on the object size. For large objects virtual memory is usually preferable and for small object physical memory is a better choice. See the spl_slab_alloc() function for a longer discussion on this. However, there is a certain amount of gray area when defining a 'large' object. For the following caches it turns out they were just over the line: * dnode_cache * zio_cache * zio_link_cache * zio_buf_512_cache * zfs_data_buf_512_cache Now because we know there will be a lot of churn in these caches, and because we know the slabs will still be reasonably sized. We can safely request with the KMC_KMEM flag that the caches be backed with physical memory addresses. This entirely avoids the need to serialize on the virtual address space lock. As a bonus this also reduces our vmalloc usage which will be good for 32-bit kernels which have a very small virtual address space. It will also probably be good for interactive performance since unrelated processes could also block of this same global lock. Finally, we may see less cpu time being burned in the arc_reclaim and txg_sync_threads. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #258
2011-11-01 23:56:48 +00:00
dnode_cache = kmem_cache_create("dnode_t", sizeof (dnode_t),
0, dnode_cons, dnode_dest, NULL, NULL, NULL, 0);
kmem_cache_set_move(dnode_cache, dnode_move);
2008-11-20 20:01:55 +00:00
}
void
dnode_fini(void)
{
kmem_cache_destroy(dnode_cache);
dnode_cache = NULL;
2008-11-20 20:01:55 +00:00
}
#ifdef ZFS_DEBUG
void
dnode_verify(dnode_t *dn)
{
int drop_struct_lock = FALSE;
ASSERT(dn->dn_phys);
ASSERT(dn->dn_objset);
ASSERT(dn->dn_handle->dnh_dnode == dn);
2008-11-20 20:01:55 +00:00
ASSERT(DMU_OT_IS_VALID(dn->dn_phys->dn_type));
2008-11-20 20:01:55 +00:00
if (!(zfs_flags & ZFS_DEBUG_DNODE_VERIFY))
return;
if (!RW_WRITE_HELD(&dn->dn_struct_rwlock)) {
rw_enter(&dn->dn_struct_rwlock, RW_READER);
drop_struct_lock = TRUE;
}
if (dn->dn_phys->dn_type != DMU_OT_NONE || dn->dn_allocated_txg != 0) {
int i;
ASSERT3U(dn->dn_indblkshift, <=, SPA_MAXBLOCKSHIFT);
if (dn->dn_datablkshift) {
ASSERT3U(dn->dn_datablkshift, >=, SPA_MINBLOCKSHIFT);
ASSERT3U(dn->dn_datablkshift, <=, SPA_MAXBLOCKSHIFT);
ASSERT3U(1<<dn->dn_datablkshift, ==, dn->dn_datablksz);
}
ASSERT3U(dn->dn_nlevels, <=, 30);
ASSERT(DMU_OT_IS_VALID(dn->dn_type));
2008-11-20 20:01:55 +00:00
ASSERT3U(dn->dn_nblkptr, >=, 1);
ASSERT3U(dn->dn_nblkptr, <=, DN_MAX_NBLKPTR);
ASSERT3U(dn->dn_bonuslen, <=, DN_MAX_BONUSLEN);
ASSERT3U(dn->dn_datablksz, ==,
dn->dn_datablkszsec << SPA_MINBLOCKSHIFT);
ASSERT3U(ISP2(dn->dn_datablksz), ==, dn->dn_datablkshift != 0);
ASSERT3U((dn->dn_nblkptr - 1) * sizeof (blkptr_t) +
dn->dn_bonuslen, <=, DN_MAX_BONUSLEN);
for (i = 0; i < TXG_SIZE; i++) {
ASSERT3U(dn->dn_next_nlevels[i], <=, dn->dn_nlevels);
}
}
if (dn->dn_phys->dn_type != DMU_OT_NONE)
ASSERT3U(dn->dn_phys->dn_nlevels, <=, dn->dn_nlevels);
2009-07-02 22:44:48 +00:00
ASSERT(DMU_OBJECT_IS_SPECIAL(dn->dn_object) || dn->dn_dbuf != NULL);
2008-11-20 20:01:55 +00:00
if (dn->dn_dbuf != NULL) {
ASSERT3P(dn->dn_phys, ==,
(dnode_phys_t *)dn->dn_dbuf->db.db_data +
(dn->dn_object % (dn->dn_dbuf->db.db_size >> DNODE_SHIFT)));
}
if (drop_struct_lock)
rw_exit(&dn->dn_struct_rwlock);
}
#endif
void
dnode_byteswap(dnode_phys_t *dnp)
{
uint64_t *buf64 = (void*)&dnp->dn_blkptr;
int i;
if (dnp->dn_type == DMU_OT_NONE) {
bzero(dnp, sizeof (dnode_phys_t));
return;
}
dnp->dn_datablkszsec = BSWAP_16(dnp->dn_datablkszsec);
dnp->dn_bonuslen = BSWAP_16(dnp->dn_bonuslen);
dnp->dn_maxblkid = BSWAP_64(dnp->dn_maxblkid);
dnp->dn_used = BSWAP_64(dnp->dn_used);
/*
* dn_nblkptr is only one byte, so it's OK to read it in either
* byte order. We can't read dn_bouslen.
*/
ASSERT(dnp->dn_indblkshift <= SPA_MAXBLOCKSHIFT);
ASSERT(dnp->dn_nblkptr <= DN_MAX_NBLKPTR);
for (i = 0; i < dnp->dn_nblkptr * sizeof (blkptr_t)/8; i++)
buf64[i] = BSWAP_64(buf64[i]);
/*
* OK to check dn_bonuslen for zero, because it won't matter if
* we have the wrong byte order. This is necessary because the
* dnode dnode is smaller than a regular dnode.
*/
if (dnp->dn_bonuslen != 0) {
/*
* Note that the bonus length calculated here may be
* longer than the actual bonus buffer. This is because
* we always put the bonus buffer after the last block
* pointer (instead of packing it against the end of the
* dnode buffer).
*/
int off = (dnp->dn_nblkptr-1) * sizeof (blkptr_t);
size_t len = DN_MAX_BONUSLEN - off;
dmu_object_byteswap_t byteswap;
ASSERT(DMU_OT_IS_VALID(dnp->dn_bonustype));
byteswap = DMU_OT_BYTESWAP(dnp->dn_bonustype);
dmu_ot_byteswap[byteswap].ob_func(dnp->dn_bonus + off, len);
2008-11-20 20:01:55 +00:00
}
/* Swap SPILL block if we have one */
if (dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR)
byteswap_uint64_array(&dnp->dn_spill, sizeof (blkptr_t));
2008-11-20 20:01:55 +00:00
}
void
dnode_buf_byteswap(void *vbuf, size_t size)
{
dnode_phys_t *buf = vbuf;
int i;
ASSERT3U(sizeof (dnode_phys_t), ==, (1<<DNODE_SHIFT));
ASSERT((size & (sizeof (dnode_phys_t)-1)) == 0);
size >>= DNODE_SHIFT;
for (i = 0; i < size; i++) {
dnode_byteswap(buf);
buf++;
}
}
void
dnode_setbonuslen(dnode_t *dn, int newsize, dmu_tx_t *tx)
{
ASSERT3U(refcount_count(&dn->dn_holds), >=, 1);
dnode_setdirty(dn, tx);
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
ASSERT3U(newsize, <=, DN_MAX_BONUSLEN -
(dn->dn_nblkptr-1) * sizeof (blkptr_t));
dn->dn_bonuslen = newsize;
if (newsize == 0)
dn->dn_next_bonuslen[tx->tx_txg & TXG_MASK] = DN_ZERO_BONUSLEN;
else
dn->dn_next_bonuslen[tx->tx_txg & TXG_MASK] = dn->dn_bonuslen;
rw_exit(&dn->dn_struct_rwlock);
}
void
dnode_setbonus_type(dnode_t *dn, dmu_object_type_t newtype, dmu_tx_t *tx)
{
ASSERT3U(refcount_count(&dn->dn_holds), >=, 1);
dnode_setdirty(dn, tx);
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
dn->dn_bonustype = newtype;
dn->dn_next_bonustype[tx->tx_txg & TXG_MASK] = dn->dn_bonustype;
rw_exit(&dn->dn_struct_rwlock);
}
void
dnode_rm_spill(dnode_t *dn, dmu_tx_t *tx)
{
ASSERT3U(refcount_count(&dn->dn_holds), >=, 1);
ASSERT(RW_WRITE_HELD(&dn->dn_struct_rwlock));
dnode_setdirty(dn, tx);
dn->dn_rm_spillblk[tx->tx_txg&TXG_MASK] = DN_KILL_SPILLBLK;
dn->dn_have_spill = B_FALSE;
}
2008-11-20 20:01:55 +00:00
static void
dnode_setdblksz(dnode_t *dn, int size)
{
ASSERT0(P2PHASE(size, SPA_MINBLOCKSIZE));
2008-11-20 20:01:55 +00:00
ASSERT3U(size, <=, SPA_MAXBLOCKSIZE);
ASSERT3U(size, >=, SPA_MINBLOCKSIZE);
ASSERT3U(size >> SPA_MINBLOCKSHIFT, <,
1<<(sizeof (dn->dn_phys->dn_datablkszsec) * 8));
dn->dn_datablksz = size;
dn->dn_datablkszsec = size >> SPA_MINBLOCKSHIFT;
dn->dn_datablkshift = ISP2(size) ? highbit64(size - 1) : 0;
2008-11-20 20:01:55 +00:00
}
static dnode_t *
dnode_create(objset_t *os, dnode_phys_t *dnp, dmu_buf_impl_t *db,
uint64_t object, dnode_handle_t *dnh)
2008-11-20 20:01:55 +00:00
{
dnode_t *dn;
2008-11-20 20:01:55 +00:00
dn = kmem_cache_alloc(dnode_cache, KM_SLEEP);
ASSERT(!POINTER_IS_VALID(dn->dn_objset));
dn->dn_moved = 0;
/*
* Defer setting dn_objset until the dnode is ready to be a candidate
* for the dnode_move() callback.
*/
2008-11-20 20:01:55 +00:00
dn->dn_object = object;
dn->dn_dbuf = db;
dn->dn_handle = dnh;
2008-11-20 20:01:55 +00:00
dn->dn_phys = dnp;
if (dnp->dn_datablkszsec) {
2008-11-20 20:01:55 +00:00
dnode_setdblksz(dn, dnp->dn_datablkszsec << SPA_MINBLOCKSHIFT);
} else {
dn->dn_datablksz = 0;
dn->dn_datablkszsec = 0;
dn->dn_datablkshift = 0;
}
2008-11-20 20:01:55 +00:00
dn->dn_indblkshift = dnp->dn_indblkshift;
dn->dn_nlevels = dnp->dn_nlevels;
dn->dn_type = dnp->dn_type;
dn->dn_nblkptr = dnp->dn_nblkptr;
dn->dn_checksum = dnp->dn_checksum;
dn->dn_compress = dnp->dn_compress;
dn->dn_bonustype = dnp->dn_bonustype;
dn->dn_bonuslen = dnp->dn_bonuslen;
dn->dn_maxblkid = dnp->dn_maxblkid;
dn->dn_have_spill = ((dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) != 0);
dn->dn_id_flags = 0;
2008-11-20 20:01:55 +00:00
dmu_zfetch_init(&dn->dn_zfetch, dn);
ASSERT(DMU_OT_IS_VALID(dn->dn_phys->dn_type));
2008-11-20 20:01:55 +00:00
mutex_enter(&os->os_lock);
if (dnh->dnh_dnode != NULL) {
/* Lost the allocation race. */
mutex_exit(&os->os_lock);
kmem_cache_free(dnode_cache, dn);
return (dnh->dnh_dnode);
}
/*
* Exclude special dnodes from os_dnodes so an empty os_dnodes
* signifies that the special dnodes have no references from
* their children (the entries in os_dnodes). This allows
* dnode_destroy() to easily determine if the last child has
* been removed and then complete eviction of the objset.
*/
if (!DMU_OBJECT_IS_SPECIAL(object))
list_insert_head(&os->os_dnodes, dn);
membar_producer();
/*
* Everything else must be valid before assigning dn_objset
* makes the dnode eligible for dnode_move().
*/
dn->dn_objset = os;
dnh->dnh_dnode = dn;
2008-11-20 20:01:55 +00:00
mutex_exit(&os->os_lock);
2009-02-18 20:51:31 +00:00
arc_space_consume(sizeof (dnode_t), ARC_SPACE_OTHER);
2008-11-20 20:01:55 +00:00
return (dn);
}
/*
* Caller must be holding the dnode handle, which is released upon return.
*/
2008-11-20 20:01:55 +00:00
static void
dnode_destroy(dnode_t *dn)
{
objset_t *os = dn->dn_objset;
boolean_t complete_os_eviction = B_FALSE;
2008-11-20 20:01:55 +00:00
ASSERT((dn->dn_id_flags & DN_ID_NEW_EXIST) == 0);
2008-11-20 20:01:55 +00:00
mutex_enter(&os->os_lock);
POINTER_INVALIDATE(&dn->dn_objset);
if (!DMU_OBJECT_IS_SPECIAL(dn->dn_object)) {
list_remove(&os->os_dnodes, dn);
complete_os_eviction =
list_is_empty(&os->os_dnodes) &&
list_link_active(&os->os_evicting_node);
}
2008-11-20 20:01:55 +00:00
mutex_exit(&os->os_lock);
/* the dnode can no longer move, so we can release the handle */
zrl_remove(&dn->dn_handle->dnh_zrlock);
dn->dn_allocated_txg = 0;
dn->dn_free_txg = 0;
dn->dn_assigned_txg = 0;
dn->dn_dirtyctx = 0;
if (dn->dn_dirtyctx_firstset != NULL) {
2008-11-20 20:01:55 +00:00
kmem_free(dn->dn_dirtyctx_firstset, 1);
dn->dn_dirtyctx_firstset = NULL;
}
if (dn->dn_bonus != NULL) {
2008-11-20 20:01:55 +00:00
mutex_enter(&dn->dn_bonus->db_mtx);
dbuf_evict(dn->dn_bonus);
dn->dn_bonus = NULL;
}
dn->dn_zio = NULL;
dn->dn_have_spill = B_FALSE;
dn->dn_oldused = 0;
dn->dn_oldflags = 0;
dn->dn_olduid = 0;
dn->dn_oldgid = 0;
dn->dn_newuid = 0;
dn->dn_newgid = 0;
dn->dn_id_flags = 0;
dn->dn_unlisted_l0_blkid = 0;
dmu_zfetch_fini(&dn->dn_zfetch);
2008-11-20 20:01:55 +00:00
kmem_cache_free(dnode_cache, dn);
2009-02-18 20:51:31 +00:00
arc_space_return(sizeof (dnode_t), ARC_SPACE_OTHER);
if (complete_os_eviction)
dmu_objset_evict_done(os);
2008-11-20 20:01:55 +00:00
}
void
dnode_allocate(dnode_t *dn, dmu_object_type_t ot, int blocksize, int ibs,
dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx)
{
int i;
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
ASSERT3U(blocksize, <=,
spa_maxblocksize(dmu_objset_spa(dn->dn_objset)));
2008-11-20 20:01:55 +00:00
if (blocksize == 0)
blocksize = 1 << zfs_default_bs;
else
blocksize = P2ROUNDUP(blocksize, SPA_MINBLOCKSIZE);
if (ibs == 0)
ibs = zfs_default_ibs;
ibs = MIN(MAX(ibs, DN_MIN_INDBLKSHIFT), DN_MAX_INDBLKSHIFT);
dprintf("os=%p obj=%llu txg=%llu blocksize=%d ibs=%d\n", dn->dn_objset,
dn->dn_object, tx->tx_txg, blocksize, ibs);
ASSERT(dn->dn_type == DMU_OT_NONE);
ASSERT(bcmp(dn->dn_phys, &dnode_phys_zero, sizeof (dnode_phys_t)) == 0);
ASSERT(dn->dn_phys->dn_type == DMU_OT_NONE);
ASSERT(ot != DMU_OT_NONE);
ASSERT(DMU_OT_IS_VALID(ot));
2008-11-20 20:01:55 +00:00
ASSERT((bonustype == DMU_OT_NONE && bonuslen == 0) ||
(bonustype == DMU_OT_SA && bonuslen == 0) ||
2008-11-20 20:01:55 +00:00
(bonustype != DMU_OT_NONE && bonuslen != 0));
ASSERT(DMU_OT_IS_VALID(bonustype));
2008-11-20 20:01:55 +00:00
ASSERT3U(bonuslen, <=, DN_MAX_BONUSLEN);
ASSERT(dn->dn_type == DMU_OT_NONE);
ASSERT0(dn->dn_maxblkid);
ASSERT0(dn->dn_allocated_txg);
ASSERT0(dn->dn_assigned_txg);
2008-11-20 20:01:55 +00:00
ASSERT(refcount_is_zero(&dn->dn_tx_holds));
ASSERT3U(refcount_count(&dn->dn_holds), <=, 1);
ASSERT(avl_is_empty(&dn->dn_dbufs));
2008-11-20 20:01:55 +00:00
for (i = 0; i < TXG_SIZE; i++) {
ASSERT0(dn->dn_next_nblkptr[i]);
ASSERT0(dn->dn_next_nlevels[i]);
ASSERT0(dn->dn_next_indblkshift[i]);
ASSERT0(dn->dn_next_bonuslen[i]);
ASSERT0(dn->dn_next_bonustype[i]);
ASSERT0(dn->dn_rm_spillblk[i]);
ASSERT0(dn->dn_next_blksz[i]);
2008-11-20 20:01:55 +00:00
ASSERT(!list_link_active(&dn->dn_dirty_link[i]));
ASSERT3P(list_head(&dn->dn_dirty_records[i]), ==, NULL);
ASSERT3P(dn->dn_free_ranges[i], ==, NULL);
2008-11-20 20:01:55 +00:00
}
dn->dn_type = ot;
dnode_setdblksz(dn, blocksize);
dn->dn_indblkshift = ibs;
dn->dn_nlevels = 1;
if (bonustype == DMU_OT_SA) /* Maximize bonus space for SA */
dn->dn_nblkptr = 1;
else
dn->dn_nblkptr = 1 +
((DN_MAX_BONUSLEN - bonuslen) >> SPA_BLKPTRSHIFT);
2008-11-20 20:01:55 +00:00
dn->dn_bonustype = bonustype;
dn->dn_bonuslen = bonuslen;
dn->dn_checksum = ZIO_CHECKSUM_INHERIT;
dn->dn_compress = ZIO_COMPRESS_INHERIT;
dn->dn_dirtyctx = 0;
dn->dn_free_txg = 0;
if (dn->dn_dirtyctx_firstset) {
kmem_free(dn->dn_dirtyctx_firstset, 1);
dn->dn_dirtyctx_firstset = NULL;
}
dn->dn_allocated_txg = tx->tx_txg;
dn->dn_id_flags = 0;
2008-11-20 20:01:55 +00:00
dnode_setdirty(dn, tx);
dn->dn_next_indblkshift[tx->tx_txg & TXG_MASK] = ibs;
dn->dn_next_bonuslen[tx->tx_txg & TXG_MASK] = dn->dn_bonuslen;
dn->dn_next_bonustype[tx->tx_txg & TXG_MASK] = dn->dn_bonustype;
2008-11-20 20:01:55 +00:00
dn->dn_next_blksz[tx->tx_txg & TXG_MASK] = dn->dn_datablksz;
}
void
dnode_reallocate(dnode_t *dn, dmu_object_type_t ot, int blocksize,
dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx)
{
2009-07-02 22:44:48 +00:00
int nblkptr;
2008-11-20 20:01:55 +00:00
ASSERT3U(blocksize, >=, SPA_MINBLOCKSIZE);
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
ASSERT3U(blocksize, <=,
spa_maxblocksize(dmu_objset_spa(dn->dn_objset)));
ASSERT0(blocksize % SPA_MINBLOCKSIZE);
2008-11-20 20:01:55 +00:00
ASSERT(dn->dn_object != DMU_META_DNODE_OBJECT || dmu_tx_private_ok(tx));
ASSERT(tx->tx_txg != 0);
ASSERT((bonustype == DMU_OT_NONE && bonuslen == 0) ||
(bonustype != DMU_OT_NONE && bonuslen != 0) ||
(bonustype == DMU_OT_SA && bonuslen == 0));
ASSERT(DMU_OT_IS_VALID(bonustype));
2008-11-20 20:01:55 +00:00
ASSERT3U(bonuslen, <=, DN_MAX_BONUSLEN);
/* clean up any unreferenced dbufs */
dnode_evict_dbufs(dn);
2009-02-18 20:51:31 +00:00
dn->dn_id_flags = 0;
2008-11-20 20:01:55 +00:00
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
dnode_setdirty(dn, tx);
2009-07-02 22:44:48 +00:00
if (dn->dn_datablksz != blocksize) {
/* change blocksize */
ASSERT(dn->dn_maxblkid == 0 &&
(BP_IS_HOLE(&dn->dn_phys->dn_blkptr[0]) ||
dnode_block_freed(dn, 0)));
dnode_setdblksz(dn, blocksize);
dn->dn_next_blksz[tx->tx_txg&TXG_MASK] = blocksize;
}
if (dn->dn_bonuslen != bonuslen)
dn->dn_next_bonuslen[tx->tx_txg&TXG_MASK] = bonuslen;
if (bonustype == DMU_OT_SA) /* Maximize bonus space for SA */
nblkptr = 1;
else
nblkptr = 1 + ((DN_MAX_BONUSLEN - bonuslen) >> SPA_BLKPTRSHIFT);
if (dn->dn_bonustype != bonustype)
dn->dn_next_bonustype[tx->tx_txg&TXG_MASK] = bonustype;
2009-02-18 20:51:31 +00:00
if (dn->dn_nblkptr != nblkptr)
dn->dn_next_nblkptr[tx->tx_txg&TXG_MASK] = nblkptr;
if (dn->dn_phys->dn_flags & DNODE_FLAG_SPILL_BLKPTR) {
dbuf_rm_spill(dn, tx);
dnode_rm_spill(dn, tx);
}
2008-11-20 20:01:55 +00:00
rw_exit(&dn->dn_struct_rwlock);
/* change type */
dn->dn_type = ot;
/* change bonus size and type */
mutex_enter(&dn->dn_mtx);
dn->dn_bonustype = bonustype;
dn->dn_bonuslen = bonuslen;
2009-02-18 20:51:31 +00:00
dn->dn_nblkptr = nblkptr;
2008-11-20 20:01:55 +00:00
dn->dn_checksum = ZIO_CHECKSUM_INHERIT;
dn->dn_compress = ZIO_COMPRESS_INHERIT;
ASSERT3U(dn->dn_nblkptr, <=, DN_MAX_NBLKPTR);
2009-02-18 20:51:31 +00:00
/* fix up the bonus db_size */
if (dn->dn_bonus) {
2008-11-20 20:01:55 +00:00
dn->dn_bonus->db.db_size =
DN_MAX_BONUSLEN - (dn->dn_nblkptr-1) * sizeof (blkptr_t);
ASSERT(dn->dn_bonuslen <= dn->dn_bonus->db.db_size);
}
dn->dn_allocated_txg = tx->tx_txg;
mutex_exit(&dn->dn_mtx);
}
#ifdef _KERNEL
#ifdef DNODE_STATS
static struct {
uint64_t dms_dnode_invalid;
uint64_t dms_dnode_recheck1;
uint64_t dms_dnode_recheck2;
uint64_t dms_dnode_special;
uint64_t dms_dnode_handle;
uint64_t dms_dnode_rwlock;
uint64_t dms_dnode_active;
} dnode_move_stats;
#endif /* DNODE_STATS */
static void
dnode_move_impl(dnode_t *odn, dnode_t *ndn)
{
int i;
ASSERT(!RW_LOCK_HELD(&odn->dn_struct_rwlock));
ASSERT(MUTEX_NOT_HELD(&odn->dn_mtx));
ASSERT(MUTEX_NOT_HELD(&odn->dn_dbufs_mtx));
ASSERT(!RW_LOCK_HELD(&odn->dn_zfetch.zf_rwlock));
/* Copy fields. */
ndn->dn_objset = odn->dn_objset;
ndn->dn_object = odn->dn_object;
ndn->dn_dbuf = odn->dn_dbuf;
ndn->dn_handle = odn->dn_handle;
ndn->dn_phys = odn->dn_phys;
ndn->dn_type = odn->dn_type;
ndn->dn_bonuslen = odn->dn_bonuslen;
ndn->dn_bonustype = odn->dn_bonustype;
ndn->dn_nblkptr = odn->dn_nblkptr;
ndn->dn_checksum = odn->dn_checksum;
ndn->dn_compress = odn->dn_compress;
ndn->dn_nlevels = odn->dn_nlevels;
ndn->dn_indblkshift = odn->dn_indblkshift;
ndn->dn_datablkshift = odn->dn_datablkshift;
ndn->dn_datablkszsec = odn->dn_datablkszsec;
ndn->dn_datablksz = odn->dn_datablksz;
ndn->dn_maxblkid = odn->dn_maxblkid;
bcopy(&odn->dn_next_nblkptr[0], &ndn->dn_next_nblkptr[0],
sizeof (odn->dn_next_nblkptr));
bcopy(&odn->dn_next_nlevels[0], &ndn->dn_next_nlevels[0],
sizeof (odn->dn_next_nlevels));
bcopy(&odn->dn_next_indblkshift[0], &ndn->dn_next_indblkshift[0],
sizeof (odn->dn_next_indblkshift));
bcopy(&odn->dn_next_bonustype[0], &ndn->dn_next_bonustype[0],
sizeof (odn->dn_next_bonustype));
bcopy(&odn->dn_rm_spillblk[0], &ndn->dn_rm_spillblk[0],
sizeof (odn->dn_rm_spillblk));
bcopy(&odn->dn_next_bonuslen[0], &ndn->dn_next_bonuslen[0],
sizeof (odn->dn_next_bonuslen));
bcopy(&odn->dn_next_blksz[0], &ndn->dn_next_blksz[0],
sizeof (odn->dn_next_blksz));
for (i = 0; i < TXG_SIZE; i++) {
list_move_tail(&ndn->dn_dirty_records[i],
&odn->dn_dirty_records[i]);
}
bcopy(&odn->dn_free_ranges[0], &ndn->dn_free_ranges[0],
sizeof (odn->dn_free_ranges));
ndn->dn_allocated_txg = odn->dn_allocated_txg;
ndn->dn_free_txg = odn->dn_free_txg;
ndn->dn_assigned_txg = odn->dn_assigned_txg;
ndn->dn_dirtyctx = odn->dn_dirtyctx;
ndn->dn_dirtyctx_firstset = odn->dn_dirtyctx_firstset;
ASSERT(refcount_count(&odn->dn_tx_holds) == 0);
refcount_transfer(&ndn->dn_holds, &odn->dn_holds);
ASSERT(avl_is_empty(&ndn->dn_dbufs));
avl_swap(&ndn->dn_dbufs, &odn->dn_dbufs);
ndn->dn_dbufs_count = odn->dn_dbufs_count;
ndn->dn_unlisted_l0_blkid = odn->dn_unlisted_l0_blkid;
ndn->dn_bonus = odn->dn_bonus;
ndn->dn_have_spill = odn->dn_have_spill;
ndn->dn_zio = odn->dn_zio;
ndn->dn_oldused = odn->dn_oldused;
ndn->dn_oldflags = odn->dn_oldflags;
ndn->dn_olduid = odn->dn_olduid;
ndn->dn_oldgid = odn->dn_oldgid;
ndn->dn_newuid = odn->dn_newuid;
ndn->dn_newgid = odn->dn_newgid;
ndn->dn_id_flags = odn->dn_id_flags;
dmu_zfetch_init(&ndn->dn_zfetch, NULL);
list_move_tail(&ndn->dn_zfetch.zf_stream, &odn->dn_zfetch.zf_stream);
ndn->dn_zfetch.zf_dnode = odn->dn_zfetch.zf_dnode;
/*
* Update back pointers. Updating the handle fixes the back pointer of
* every descendant dbuf as well as the bonus dbuf.
*/
ASSERT(ndn->dn_handle->dnh_dnode == odn);
ndn->dn_handle->dnh_dnode = ndn;
if (ndn->dn_zfetch.zf_dnode == odn) {
ndn->dn_zfetch.zf_dnode = ndn;
}
/*
* Invalidate the original dnode by clearing all of its back pointers.
*/
odn->dn_dbuf = NULL;
odn->dn_handle = NULL;
avl_create(&odn->dn_dbufs, dbuf_compare, sizeof (dmu_buf_impl_t),
offsetof(dmu_buf_impl_t, db_link));
odn->dn_dbufs_count = 0;
odn->dn_unlisted_l0_blkid = 0;
odn->dn_bonus = NULL;
odn->dn_zfetch.zf_dnode = NULL;
/*
* Set the low bit of the objset pointer to ensure that dnode_move()
* recognizes the dnode as invalid in any subsequent callback.
*/
POINTER_INVALIDATE(&odn->dn_objset);
/*
* Satisfy the destructor.
*/
for (i = 0; i < TXG_SIZE; i++) {
list_create(&odn->dn_dirty_records[i],
sizeof (dbuf_dirty_record_t),
offsetof(dbuf_dirty_record_t, dr_dirty_node));
odn->dn_free_ranges[i] = NULL;
odn->dn_next_nlevels[i] = 0;
odn->dn_next_indblkshift[i] = 0;
odn->dn_next_bonustype[i] = 0;
odn->dn_rm_spillblk[i] = 0;
odn->dn_next_bonuslen[i] = 0;
odn->dn_next_blksz[i] = 0;
}
odn->dn_allocated_txg = 0;
odn->dn_free_txg = 0;
odn->dn_assigned_txg = 0;
odn->dn_dirtyctx = 0;
odn->dn_dirtyctx_firstset = NULL;
odn->dn_have_spill = B_FALSE;
odn->dn_zio = NULL;
odn->dn_oldused = 0;
odn->dn_oldflags = 0;
odn->dn_olduid = 0;
odn->dn_oldgid = 0;
odn->dn_newuid = 0;
odn->dn_newgid = 0;
odn->dn_id_flags = 0;
/*
* Mark the dnode.
*/
ndn->dn_moved = 1;
odn->dn_moved = (uint8_t)-1;
}
/*ARGSUSED*/
static kmem_cbrc_t
dnode_move(void *buf, void *newbuf, size_t size, void *arg)
{
dnode_t *odn = buf, *ndn = newbuf;
objset_t *os;
int64_t refcount;
uint32_t dbufs;
/*
* The dnode is on the objset's list of known dnodes if the objset
* pointer is valid. We set the low bit of the objset pointer when
* freeing the dnode to invalidate it, and the memory patterns written
* by kmem (baddcafe and deadbeef) set at least one of the two low bits.
* A newly created dnode sets the objset pointer last of all to indicate
* that the dnode is known and in a valid state to be moved by this
* function.
*/
os = odn->dn_objset;
if (!POINTER_IS_VALID(os)) {
DNODE_STAT_ADD(dnode_move_stats.dms_dnode_invalid);
return (KMEM_CBRC_DONT_KNOW);
}
/*
* Ensure that the objset does not go away during the move.
*/
rw_enter(&os_lock, RW_WRITER);
if (os != odn->dn_objset) {
rw_exit(&os_lock);
DNODE_STAT_ADD(dnode_move_stats.dms_dnode_recheck1);
return (KMEM_CBRC_DONT_KNOW);
}
/*
* If the dnode is still valid, then so is the objset. We know that no
* valid objset can be freed while we hold os_lock, so we can safely
* ensure that the objset remains in use.
*/
mutex_enter(&os->os_lock);
/*
* Recheck the objset pointer in case the dnode was removed just before
* acquiring the lock.
*/
if (os != odn->dn_objset) {
mutex_exit(&os->os_lock);
rw_exit(&os_lock);
DNODE_STAT_ADD(dnode_move_stats.dms_dnode_recheck2);
return (KMEM_CBRC_DONT_KNOW);
}
/*
* At this point we know that as long as we hold os->os_lock, the dnode
* cannot be freed and fields within the dnode can be safely accessed.
* The objset listing this dnode cannot go away as long as this dnode is
* on its list.
*/
rw_exit(&os_lock);
if (DMU_OBJECT_IS_SPECIAL(odn->dn_object)) {
mutex_exit(&os->os_lock);
DNODE_STAT_ADD(dnode_move_stats.dms_dnode_special);
return (KMEM_CBRC_NO);
}
ASSERT(odn->dn_dbuf != NULL); /* only "special" dnodes have no parent */
/*
* Lock the dnode handle to prevent the dnode from obtaining any new
* holds. This also prevents the descendant dbufs and the bonus dbuf
* from accessing the dnode, so that we can discount their holds. The
* handle is safe to access because we know that while the dnode cannot
* go away, neither can its handle. Once we hold dnh_zrlock, we can
* safely move any dnode referenced only by dbufs.
*/
if (!zrl_tryenter(&odn->dn_handle->dnh_zrlock)) {
mutex_exit(&os->os_lock);
DNODE_STAT_ADD(dnode_move_stats.dms_dnode_handle);
return (KMEM_CBRC_LATER);
}
/*
* Ensure a consistent view of the dnode's holds and the dnode's dbufs.
* We need to guarantee that there is a hold for every dbuf in order to
* determine whether the dnode is actively referenced. Falsely matching
* a dbuf to an active hold would lead to an unsafe move. It's possible
* that a thread already having an active dnode hold is about to add a
* dbuf, and we can't compare hold and dbuf counts while the add is in
* progress.
*/
if (!rw_tryenter(&odn->dn_struct_rwlock, RW_WRITER)) {
zrl_exit(&odn->dn_handle->dnh_zrlock);
mutex_exit(&os->os_lock);
DNODE_STAT_ADD(dnode_move_stats.dms_dnode_rwlock);
return (KMEM_CBRC_LATER);
}
/*
* A dbuf may be removed (evicted) without an active dnode hold. In that
* case, the dbuf count is decremented under the handle lock before the
* dbuf's hold is released. This order ensures that if we count the hold
* after the dbuf is removed but before its hold is released, we will
* treat the unmatched hold as active and exit safely. If we count the
* hold before the dbuf is removed, the hold is discounted, and the
* removal is blocked until the move completes.
*/
refcount = refcount_count(&odn->dn_holds);
ASSERT(refcount >= 0);
dbufs = odn->dn_dbufs_count;
/* We can't have more dbufs than dnode holds. */
ASSERT3U(dbufs, <=, refcount);
DTRACE_PROBE3(dnode__move, dnode_t *, odn, int64_t, refcount,
uint32_t, dbufs);
if (refcount > dbufs) {
rw_exit(&odn->dn_struct_rwlock);
zrl_exit(&odn->dn_handle->dnh_zrlock);
mutex_exit(&os->os_lock);
DNODE_STAT_ADD(dnode_move_stats.dms_dnode_active);
return (KMEM_CBRC_LATER);
}
rw_exit(&odn->dn_struct_rwlock);
/*
* At this point we know that anyone with a hold on the dnode is not
* actively referencing it. The dnode is known and in a valid state to
* move. We're holding the locks needed to execute the critical section.
*/
dnode_move_impl(odn, ndn);
list_link_replace(&odn->dn_link, &ndn->dn_link);
/* If the dnode was safe to move, the refcount cannot have changed. */
ASSERT(refcount == refcount_count(&ndn->dn_holds));
ASSERT(dbufs == ndn->dn_dbufs_count);
zrl_exit(&ndn->dn_handle->dnh_zrlock); /* handle has moved */
mutex_exit(&os->os_lock);
return (KMEM_CBRC_YES);
}
#endif /* _KERNEL */
2008-11-20 20:01:55 +00:00
void
dnode_special_close(dnode_handle_t *dnh)
2008-11-20 20:01:55 +00:00
{
dnode_t *dn = dnh->dnh_dnode;
2008-11-20 20:01:55 +00:00
/*
* Wait for final references to the dnode to clear. This can
* only happen if the arc is asyncronously evicting state that
* has a hold on this dnode while we are trying to evict this
* dnode.
*/
while (refcount_count(&dn->dn_holds) > 0)
delay(1);
ASSERT(dn->dn_dbuf == NULL ||
dmu_buf_get_user(&dn->dn_dbuf->db) == NULL);
zrl_add(&dnh->dnh_zrlock);
dnode_destroy(dn); /* implicit zrl_remove() */
zrl_destroy(&dnh->dnh_zrlock);
dnh->dnh_dnode = NULL;
2008-11-20 20:01:55 +00:00
}
void
dnode_special_open(objset_t *os, dnode_phys_t *dnp, uint64_t object,
dnode_handle_t *dnh)
2008-11-20 20:01:55 +00:00
{
dnode_t *dn;
dn = dnode_create(os, dnp, NULL, object, dnh);
zrl_init(&dnh->dnh_zrlock);
2008-11-20 20:01:55 +00:00
DNODE_VERIFY(dn);
}
static void
dnode_buf_pageout(void *dbu)
2008-11-20 20:01:55 +00:00
{
dnode_children_t *children_dnodes = dbu;
2008-11-20 20:01:55 +00:00
int i;
for (i = 0; i < children_dnodes->dnc_count; i++) {
dnode_handle_t *dnh = &children_dnodes->dnc_children[i];
dnode_t *dn;
2008-11-20 20:01:55 +00:00
/*
* The dnode handle lock guards against the dnode moving to
* another valid address, so there is no need here to guard
* against changes to or from NULL.
*/
if (dnh->dnh_dnode == NULL) {
zrl_destroy(&dnh->dnh_zrlock);
2008-11-20 20:01:55 +00:00
continue;
}
zrl_add(&dnh->dnh_zrlock);
dn = dnh->dnh_dnode;
2008-11-20 20:01:55 +00:00
/*
* If there are holds on this dnode, then there should
* be holds on the dnode's containing dbuf as well; thus
* it wouldn't be eligible for eviction and this function
2008-11-20 20:01:55 +00:00
* would not have been called.
*/
ASSERT(refcount_is_zero(&dn->dn_holds));
ASSERT(refcount_is_zero(&dn->dn_tx_holds));
dnode_destroy(dn); /* implicit zrl_remove() */
zrl_destroy(&dnh->dnh_zrlock);
dnh->dnh_dnode = NULL;
2008-11-20 20:01:55 +00:00
}
kmem_free(children_dnodes, sizeof (dnode_children_t) +
children_dnodes->dnc_count * sizeof (dnode_handle_t));
2008-11-20 20:01:55 +00:00
}
/*
* errors:
* EINVAL - invalid object number.
* EIO - i/o error.
* succeeds even for free dnodes.
*/
int
dnode_hold_impl(objset_t *os, uint64_t object, int flag,
2008-11-20 20:01:55 +00:00
void *tag, dnode_t **dnp)
{
int epb, idx, err;
int drop_struct_lock = FALSE;
int type;
uint64_t blk;
dnode_t *mdn, *dn;
dmu_buf_impl_t *db;
dnode_children_t *children_dnodes;
dnode_handle_t *dnh;
2008-11-20 20:01:55 +00:00
/*
* If you are holding the spa config lock as writer, you shouldn't
* be asking the DMU to do *anything* unless it's the root pool
* which may require us to read from the root filesystem while
* holding some (not all) of the locks as writer.
*/
ASSERT(spa_config_held(os->os_spa, SCL_ALL, RW_WRITER) == 0 ||
(spa_is_root(os->os_spa) &&
spa_config_held(os->os_spa, SCL_STATE, RW_WRITER)));
2009-07-02 22:44:48 +00:00
if (object == DMU_USERUSED_OBJECT || object == DMU_GROUPUSED_OBJECT) {
dn = (object == DMU_USERUSED_OBJECT) ?
DMU_USERUSED_DNODE(os) : DMU_GROUPUSED_DNODE(os);
2009-07-02 22:44:48 +00:00
if (dn == NULL)
return (SET_ERROR(ENOENT));
2009-07-02 22:44:48 +00:00
type = dn->dn_type;
if ((flag & DNODE_MUST_BE_ALLOCATED) && type == DMU_OT_NONE)
return (SET_ERROR(ENOENT));
2009-07-02 22:44:48 +00:00
if ((flag & DNODE_MUST_BE_FREE) && type != DMU_OT_NONE)
return (SET_ERROR(EEXIST));
2009-07-02 22:44:48 +00:00
DNODE_VERIFY(dn);
(void) refcount_add(&dn->dn_holds, tag);
*dnp = dn;
return (0);
}
2008-11-20 20:01:55 +00:00
if (object == 0 || object >= DN_MAX_OBJECT)
return (SET_ERROR(EINVAL));
2008-11-20 20:01:55 +00:00
mdn = DMU_META_DNODE(os);
ASSERT(mdn->dn_object == DMU_META_DNODE_OBJECT);
2008-11-20 20:01:55 +00:00
DNODE_VERIFY(mdn);
if (!RW_WRITE_HELD(&mdn->dn_struct_rwlock)) {
rw_enter(&mdn->dn_struct_rwlock, RW_READER);
drop_struct_lock = TRUE;
}
blk = dbuf_whichblock(mdn, 0, object * sizeof (dnode_phys_t));
2008-11-20 20:01:55 +00:00
db = dbuf_hold(mdn, blk, FTAG);
if (drop_struct_lock)
rw_exit(&mdn->dn_struct_rwlock);
if (db == NULL)
return (SET_ERROR(EIO));
2008-11-20 20:01:55 +00:00
err = dbuf_read(db, NULL, DB_RF_CANFAIL);
if (err) {
dbuf_rele(db, FTAG);
return (err);
}
ASSERT3U(db->db.db_size, >=, 1<<DNODE_SHIFT);
epb = db->db.db_size >> DNODE_SHIFT;
idx = object & (epb-1);
ASSERT(DB_DNODE(db)->dn_type == DMU_OT_DNODE);
2008-11-20 20:01:55 +00:00
children_dnodes = dmu_buf_get_user(&db->db);
if (children_dnodes == NULL) {
int i;
dnode_children_t *winner;
children_dnodes = kmem_zalloc(sizeof (dnode_children_t) +
epb * sizeof (dnode_handle_t), KM_SLEEP);
children_dnodes->dnc_count = epb;
dnh = &children_dnodes->dnc_children[0];
for (i = 0; i < epb; i++) {
zrl_init(&dnh[i].dnh_zrlock);
}
dmu_buf_init_user(&children_dnodes->dnc_dbu,
dnode_buf_pageout, NULL);
winner = dmu_buf_set_user(&db->db, &children_dnodes->dnc_dbu);
if (winner != NULL) {
for (i = 0; i < epb; i++) {
zrl_destroy(&dnh[i].dnh_zrlock);
}
kmem_free(children_dnodes, sizeof (dnode_children_t) +
epb * sizeof (dnode_handle_t));
2008-11-20 20:01:55 +00:00
children_dnodes = winner;
}
}
ASSERT(children_dnodes->dnc_count == epb);
2008-11-20 20:01:55 +00:00
dnh = &children_dnodes->dnc_children[idx];
zrl_add(&dnh->dnh_zrlock);
dn = dnh->dnh_dnode;
if (dn == NULL) {
dnode_phys_t *phys = (dnode_phys_t *)db->db.db_data+idx;
2008-11-20 20:01:55 +00:00
dn = dnode_create(os, phys, db, object, dnh);
2008-11-20 20:01:55 +00:00
}
mutex_enter(&dn->dn_mtx);
type = dn->dn_type;
if (dn->dn_free_txg ||
((flag & DNODE_MUST_BE_ALLOCATED) && type == DMU_OT_NONE) ||
2009-07-02 22:44:48 +00:00
((flag & DNODE_MUST_BE_FREE) &&
(type != DMU_OT_NONE || !refcount_is_zero(&dn->dn_holds)))) {
2008-11-20 20:01:55 +00:00
mutex_exit(&dn->dn_mtx);
zrl_remove(&dnh->dnh_zrlock);
2008-11-20 20:01:55 +00:00
dbuf_rele(db, FTAG);
return (type == DMU_OT_NONE ? ENOENT : EEXIST);
}
if (refcount_add(&dn->dn_holds, tag) == 1)
dbuf_add_ref(db, dnh);
mutex_exit(&dn->dn_mtx);
/* Now we can rely on the hold to prevent the dnode from moving. */
zrl_remove(&dnh->dnh_zrlock);
2008-11-20 20:01:55 +00:00
DNODE_VERIFY(dn);
ASSERT3P(dn->dn_dbuf, ==, db);
ASSERT3U(dn->dn_object, ==, object);
dbuf_rele(db, FTAG);
*dnp = dn;
return (0);
}
/*
* Return held dnode if the object is allocated, NULL if not.
*/
int
dnode_hold(objset_t *os, uint64_t object, void *tag, dnode_t **dnp)
2008-11-20 20:01:55 +00:00
{
return (dnode_hold_impl(os, object, DNODE_MUST_BE_ALLOCATED, tag, dnp));
}
/*
* Can only add a reference if there is already at least one
* reference on the dnode. Returns FALSE if unable to add a
* new reference.
*/
boolean_t
dnode_add_ref(dnode_t *dn, void *tag)
{
mutex_enter(&dn->dn_mtx);
if (refcount_is_zero(&dn->dn_holds)) {
mutex_exit(&dn->dn_mtx);
return (FALSE);
}
VERIFY(1 < refcount_add(&dn->dn_holds, tag));
mutex_exit(&dn->dn_mtx);
return (TRUE);
}
void
dnode_rele(dnode_t *dn, void *tag)
{
mutex_enter(&dn->dn_mtx);
dnode_rele_and_unlock(dn, tag);
}
void
dnode_rele_and_unlock(dnode_t *dn, void *tag)
2008-11-20 20:01:55 +00:00
{
uint64_t refs;
/* Get while the hold prevents the dnode from moving. */
dmu_buf_impl_t *db = dn->dn_dbuf;
dnode_handle_t *dnh = dn->dn_handle;
2008-11-20 20:01:55 +00:00
refs = refcount_remove(&dn->dn_holds, tag);
mutex_exit(&dn->dn_mtx);
/*
* It's unsafe to release the last hold on a dnode by dnode_rele() or
* indirectly by dbuf_rele() while relying on the dnode handle to
* prevent the dnode from moving, since releasing the last hold could
* result in the dnode's parent dbuf evicting its dnode handles. For
* that reason anyone calling dnode_rele() or dbuf_rele() without some
* other direct or indirect hold on the dnode must first drop the dnode
* handle.
*/
ASSERT(refs > 0 || dnh->dnh_zrlock.zr_owner != curthread);
2008-11-20 20:01:55 +00:00
/* NOTE: the DNODE_DNODE does not have a dn_dbuf */
if (refs == 0 && db != NULL) {
/*
* Another thread could add a hold to the dnode handle in
* dnode_hold_impl() while holding the parent dbuf. Since the
* hold on the parent dbuf prevents the handle from being
* destroyed, the hold on the handle is OK. We can't yet assert
* that the handle has zero references, but that will be
* asserted anyway when the handle gets destroyed.
*/
dbuf_rele(db, dnh);
}
2008-11-20 20:01:55 +00:00
}
void
dnode_setdirty(dnode_t *dn, dmu_tx_t *tx)
{
objset_t *os = dn->dn_objset;
2008-11-20 20:01:55 +00:00
uint64_t txg = tx->tx_txg;
2009-07-02 22:44:48 +00:00
if (DMU_OBJECT_IS_SPECIAL(dn->dn_object)) {
dsl_dataset_dirty(os->os_dsl_dataset, tx);
2008-11-20 20:01:55 +00:00
return;
2009-07-02 22:44:48 +00:00
}
2008-11-20 20:01:55 +00:00
DNODE_VERIFY(dn);
#ifdef ZFS_DEBUG
mutex_enter(&dn->dn_mtx);
ASSERT(dn->dn_phys->dn_type || dn->dn_allocated_txg);
ASSERT(dn->dn_free_txg == 0 || dn->dn_free_txg >= txg);
2008-11-20 20:01:55 +00:00
mutex_exit(&dn->dn_mtx);
#endif
/*
* Determine old uid/gid when necessary
*/
dmu_objset_userquota_get_ids(dn, B_TRUE, tx);
2008-11-20 20:01:55 +00:00
mutex_enter(&os->os_lock);
/*
* If we are already marked dirty, we're done.
*/
if (list_link_active(&dn->dn_dirty_link[txg & TXG_MASK])) {
mutex_exit(&os->os_lock);
return;
}
ASSERT(!refcount_is_zero(&dn->dn_holds) ||
!avl_is_empty(&dn->dn_dbufs));
2008-11-20 20:01:55 +00:00
ASSERT(dn->dn_datablksz != 0);
ASSERT0(dn->dn_next_bonuslen[txg&TXG_MASK]);
ASSERT0(dn->dn_next_blksz[txg&TXG_MASK]);
ASSERT0(dn->dn_next_bonustype[txg&TXG_MASK]);
2008-11-20 20:01:55 +00:00
dprintf_ds(os->os_dsl_dataset, "obj=%llu txg=%llu\n",
dn->dn_object, txg);
if (dn->dn_free_txg > 0 && dn->dn_free_txg <= txg) {
list_insert_tail(&os->os_free_dnodes[txg&TXG_MASK], dn);
} else {
list_insert_tail(&os->os_dirty_dnodes[txg&TXG_MASK], dn);
}
mutex_exit(&os->os_lock);
/*
* The dnode maintains a hold on its containing dbuf as
* long as there are holds on it. Each instantiated child
* dbuf maintains a hold on the dnode. When the last child
2008-11-20 20:01:55 +00:00
* drops its hold, the dnode will drop its hold on the
* containing dbuf. We add a "dirty hold" here so that the
* dnode will hang around after we finish processing its
* children.
*/
VERIFY(dnode_add_ref(dn, (void *)(uintptr_t)tx->tx_txg));
(void) dbuf_dirty(dn->dn_dbuf, tx);
dsl_dataset_dirty(os->os_dsl_dataset, tx);
}
void
dnode_free(dnode_t *dn, dmu_tx_t *tx)
{
int txgoff = tx->tx_txg & TXG_MASK;
dprintf("dn=%p txg=%llu\n", dn, tx->tx_txg);
/* we should be the only holder... hopefully */
/* ASSERT3U(refcount_count(&dn->dn_holds), ==, 1); */
mutex_enter(&dn->dn_mtx);
if (dn->dn_type == DMU_OT_NONE || dn->dn_free_txg) {
mutex_exit(&dn->dn_mtx);
return;
}
dn->dn_free_txg = tx->tx_txg;
mutex_exit(&dn->dn_mtx);
/*
* If the dnode is already dirty, it needs to be moved from
* the dirty list to the free list.
*/
mutex_enter(&dn->dn_objset->os_lock);
if (list_link_active(&dn->dn_dirty_link[txgoff])) {
list_remove(&dn->dn_objset->os_dirty_dnodes[txgoff], dn);
list_insert_tail(&dn->dn_objset->os_free_dnodes[txgoff], dn);
mutex_exit(&dn->dn_objset->os_lock);
} else {
mutex_exit(&dn->dn_objset->os_lock);
dnode_setdirty(dn, tx);
}
}
/*
* Try to change the block size for the indicated dnode. This can only
* succeed if there are no blocks allocated or dirty beyond first block
*/
int
dnode_set_blksz(dnode_t *dn, uint64_t size, int ibs, dmu_tx_t *tx)
{
dmu_buf_impl_t *db;
int err;
2008-11-20 20:01:55 +00:00
Illumos 5027 - zfs large block support 5027 zfs large block support Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com> Reviewed by: Richard Elling <richard.elling@richardelling.com> Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com> Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Approved by: Dan McDonald <danmcd@omniti.com> References: https://www.illumos.org/issues/5027 https://github.com/illumos/illumos-gate/commit/b515258 Porting Notes: * Included in this patch is a tiny ISP2() cleanup in zio_init() from Illumos 5255. * Unlike the upstream Illumos commit this patch does not impose an arbitrary 128K block size limit on volumes. Volumes, like filesystems, are limited by the zfs_max_recordsize=1M module option. * By default the maximum record size is limited to 1M by the module option zfs_max_recordsize. This value may be safely increased up to 16M which is the largest block size supported by the on-disk format. At the moment, 1M blocks clearly offer a significant performance improvement but the benefits of going beyond this for the majority of workloads are less clear. * The illumos version of this patch increased DMU_MAX_ACCESS to 32M. This was determined not to be large enough when using 16M blocks because the zfs_make_xattrdir() function will fail (EFBIG) when assigning a TX. This was immediately observed under Linux because all newly created files must have a security xattr created and that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M. * On 32-bit platforms a hard limit of 1M is set for blocks due to the limited virtual address space. We should be able to relax this one the ABD patches are merged. Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #354
2014-11-03 20:15:08 +00:00
ASSERT3U(size, <=, spa_maxblocksize(dmu_objset_spa(dn->dn_objset)));
2008-11-20 20:01:55 +00:00
if (size == 0)
size = SPA_MINBLOCKSIZE;
else
size = P2ROUNDUP(size, SPA_MINBLOCKSIZE);
if (ibs == dn->dn_indblkshift)
ibs = 0;
if (size >> SPA_MINBLOCKSHIFT == dn->dn_datablkszsec && ibs == 0)
return (0);
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
/* Check for any allocated blocks beyond the first */
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (dn->dn_maxblkid != 0)
2008-11-20 20:01:55 +00:00
goto fail;
mutex_enter(&dn->dn_dbufs_mtx);
for (db = avl_first(&dn->dn_dbufs); db != NULL;
db = AVL_NEXT(&dn->dn_dbufs, db)) {
if (db->db_blkid != 0 && db->db_blkid != DMU_BONUS_BLKID &&
db->db_blkid != DMU_SPILL_BLKID) {
2008-11-20 20:01:55 +00:00
mutex_exit(&dn->dn_dbufs_mtx);
goto fail;
}
}
mutex_exit(&dn->dn_dbufs_mtx);
if (ibs && dn->dn_nlevels != 1)
goto fail;
/* resize the old block */
err = dbuf_hold_impl(dn, 0, 0, TRUE, FALSE, FTAG, &db);
if (err == 0)
2008-11-20 20:01:55 +00:00
dbuf_new_size(db, size, tx);
else if (err != ENOENT)
goto fail;
2008-11-20 20:01:55 +00:00
dnode_setdblksz(dn, size);
dnode_setdirty(dn, tx);
dn->dn_next_blksz[tx->tx_txg&TXG_MASK] = size;
if (ibs) {
dn->dn_indblkshift = ibs;
dn->dn_next_indblkshift[tx->tx_txg&TXG_MASK] = ibs;
}
/* rele after we have fixed the blocksize in the dnode */
2008-11-20 20:01:55 +00:00
if (db)
dbuf_rele(db, FTAG);
rw_exit(&dn->dn_struct_rwlock);
return (0);
fail:
rw_exit(&dn->dn_struct_rwlock);
return (SET_ERROR(ENOTSUP));
2008-11-20 20:01:55 +00:00
}
/* read-holding callers must not rely on the lock being continuously held */
2008-11-20 20:01:55 +00:00
void
dnode_new_blkid(dnode_t *dn, uint64_t blkid, dmu_tx_t *tx, boolean_t have_read)
2008-11-20 20:01:55 +00:00
{
uint64_t txgoff = tx->tx_txg & TXG_MASK;
int epbs, new_nlevels;
uint64_t sz;
ASSERT(blkid != DMU_BONUS_BLKID);
2008-11-20 20:01:55 +00:00
ASSERT(have_read ?
RW_READ_HELD(&dn->dn_struct_rwlock) :
RW_WRITE_HELD(&dn->dn_struct_rwlock));
/*
* if we have a read-lock, check to see if we need to do any work
* before upgrading to a write-lock.
*/
if (have_read) {
if (blkid <= dn->dn_maxblkid)
return;
if (!rw_tryupgrade(&dn->dn_struct_rwlock)) {
rw_exit(&dn->dn_struct_rwlock);
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
}
2008-11-20 20:01:55 +00:00
}
if (blkid <= dn->dn_maxblkid)
goto out;
dn->dn_maxblkid = blkid;
/*
* Compute the number of levels necessary to support the new maxblkid.
*/
new_nlevels = 1;
epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT;
for (sz = dn->dn_nblkptr;
sz <= blkid && sz >= dn->dn_nblkptr; sz <<= epbs)
new_nlevels++;
if (new_nlevels > dn->dn_nlevels) {
int old_nlevels = dn->dn_nlevels;
dmu_buf_impl_t *db;
list_t *list;
dbuf_dirty_record_t *new, *dr, *dr_next;
dn->dn_nlevels = new_nlevels;
ASSERT3U(new_nlevels, >, dn->dn_next_nlevels[txgoff]);
dn->dn_next_nlevels[txgoff] = new_nlevels;
/* dirty the left indirects */
db = dbuf_hold_level(dn, old_nlevels, 0, FTAG);
ASSERT(db != NULL);
2008-11-20 20:01:55 +00:00
new = dbuf_dirty(db, tx);
dbuf_rele(db, FTAG);
/* transfer the dirty records to the new indirect */
mutex_enter(&dn->dn_mtx);
mutex_enter(&new->dt.di.dr_mtx);
list = &dn->dn_dirty_records[txgoff];
for (dr = list_head(list); dr; dr = dr_next) {
dr_next = list_next(&dn->dn_dirty_records[txgoff], dr);
if (dr->dr_dbuf->db_level != new_nlevels-1 &&
dr->dr_dbuf->db_blkid != DMU_BONUS_BLKID &&
dr->dr_dbuf->db_blkid != DMU_SPILL_BLKID) {
2008-11-20 20:01:55 +00:00
ASSERT(dr->dr_dbuf->db_level == old_nlevels-1);
list_remove(&dn->dn_dirty_records[txgoff], dr);
list_insert_tail(&new->dt.di.dr_children, dr);
dr->dr_parent = new;
}
}
mutex_exit(&new->dt.di.dr_mtx);
mutex_exit(&dn->dn_mtx);
}
out:
if (have_read)
rw_downgrade(&dn->dn_struct_rwlock);
2008-11-20 20:01:55 +00:00
}
static void
dnode_dirty_l1(dnode_t *dn, uint64_t l1blkid, dmu_tx_t *tx)
{
dmu_buf_impl_t *db = dbuf_hold_level(dn, 1, l1blkid, FTAG);
if (db != NULL) {
dmu_buf_will_dirty(&db->db, tx);
dbuf_rele(db, FTAG);
}
}
2008-11-20 20:01:55 +00:00
void
dnode_free_range(dnode_t *dn, uint64_t off, uint64_t len, dmu_tx_t *tx)
{
dmu_buf_impl_t *db;
uint64_t blkoff, blkid, nblks;
int blksz, blkshift, head, tail;
2008-11-20 20:01:55 +00:00
int trunc = FALSE;
int epbs;
2008-11-20 20:01:55 +00:00
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
blksz = dn->dn_datablksz;
blkshift = dn->dn_datablkshift;
epbs = dn->dn_indblkshift - SPA_BLKPTRSHIFT;
2008-11-20 20:01:55 +00:00
if (len == DMU_OBJECT_END) {
2008-11-20 20:01:55 +00:00
len = UINT64_MAX - off;
trunc = TRUE;
}
/*
* First, block align the region to free:
*/
if (ISP2(blksz)) {
head = P2NPHASE(off, blksz);
blkoff = P2PHASE(off, blksz);
if ((off >> blkshift) > dn->dn_maxblkid)
goto out;
2008-11-20 20:01:55 +00:00
} else {
ASSERT(dn->dn_maxblkid == 0);
if (off == 0 && len >= blksz) {
/*
* Freeing the whole block; fast-track this request.
* Note that we won't dirty any indirect blocks,
* which is fine because we will be freeing the entire
* file and thus all indirect blocks will be freed
* by free_children().
*/
blkid = 0;
nblks = 1;
goto done;
} else if (off >= blksz) {
/* Freeing past end-of-data */
goto out;
2008-11-20 20:01:55 +00:00
} else {
/* Freeing part of the block. */
head = blksz - off;
ASSERT3U(head, >, 0);
}
blkoff = off;
}
/* zero out any partial block data at the start of the range */
if (head) {
ASSERT3U(blkoff + head, ==, blksz);
if (len < head)
head = len;
if (dbuf_hold_impl(dn, 0, dbuf_whichblock(dn, 0, off),
TRUE, FALSE, FTAG, &db) == 0) {
2008-11-20 20:01:55 +00:00
caddr_t data;
/* don't dirty if it isn't on disk and isn't dirty */
if (db->db_last_dirty ||
(db->db_blkptr && !BP_IS_HOLE(db->db_blkptr))) {
rw_exit(&dn->dn_struct_rwlock);
dmu_buf_will_dirty(&db->db, tx);
2008-11-20 20:01:55 +00:00
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
data = db->db.db_data;
bzero(data + blkoff, head);
}
dbuf_rele(db, FTAG);
}
off += head;
len -= head;
}
/* If the range was less than one block, we're done */
if (len == 0)
2008-11-20 20:01:55 +00:00
goto out;
/* If the remaining range is past end of file, we're done */
if ((off >> blkshift) > dn->dn_maxblkid)
goto out;
2008-11-20 20:01:55 +00:00
ASSERT(ISP2(blksz));
if (trunc)
tail = 0;
else
tail = P2PHASE(len, blksz);
ASSERT0(P2PHASE(off, blksz));
/* zero out any partial block data at the end of the range */
if (tail) {
if (len < tail)
tail = len;
if (dbuf_hold_impl(dn, 0, dbuf_whichblock(dn, 0, off+len),
TRUE, FALSE, FTAG, &db) == 0) {
/* don't dirty if not on disk and not dirty */
if (db->db_last_dirty ||
(db->db_blkptr && !BP_IS_HOLE(db->db_blkptr))) {
rw_exit(&dn->dn_struct_rwlock);
dmu_buf_will_dirty(&db->db, tx);
rw_enter(&dn->dn_struct_rwlock, RW_WRITER);
bzero(db->db.db_data, tail);
2008-11-20 20:01:55 +00:00
}
dbuf_rele(db, FTAG);
2008-11-20 20:01:55 +00:00
}
len -= tail;
}
2008-11-20 20:01:55 +00:00
/* If the range did not include a full block, we are done */
if (len == 0)
goto out;
ASSERT(IS_P2ALIGNED(off, blksz));
ASSERT(trunc || IS_P2ALIGNED(len, blksz));
blkid = off >> blkshift;
nblks = len >> blkshift;
if (trunc)
nblks += 1;
/*
* Dirty all the indirect blocks in this range. Note that only
* the first and last indirect blocks can actually be written
* (if they were partially freed) -- they must be dirtied, even if
* they do not exist on disk yet. The interior blocks will
* be freed by free_children(), so they will not actually be written.
* Even though these interior blocks will not be written, we
* dirty them for two reasons:
*
* - It ensures that the indirect blocks remain in memory until
* syncing context. (They have already been prefetched by
* dmu_tx_hold_free(), so we don't have to worry about reading
* them serially here.)
*
* - The dirty space accounting will put pressure on the txg sync
* mechanism to begin syncing, and to delay transactions if there
* is a large amount of freeing. Even though these indirect
* blocks will not be written, we could need to write the same
* amount of space if we copy the freed BPs into deadlists.
*/
if (dn->dn_nlevels > 1) {
uint64_t first, last, i, ibyte;
int shift, err;
first = blkid >> epbs;
dnode_dirty_l1(dn, first, tx);
if (trunc)
last = dn->dn_maxblkid >> epbs;
else
last = (blkid + nblks - 1) >> epbs;
if (last != first)
dnode_dirty_l1(dn, last, tx);
shift = dn->dn_datablkshift + dn->dn_indblkshift -
SPA_BLKPTRSHIFT;
for (i = first + 1; i < last; i++) {
/*
* Set i to the blockid of the next non-hole
* level-1 indirect block at or after i. Note
* that dnode_next_offset() operates in terms of
* level-0-equivalent bytes.
*/
ibyte = i << shift;
err = dnode_next_offset(dn, DNODE_FIND_HAVELOCK,
&ibyte, 2, 1, 0);
i = ibyte >> shift;
if (i >= last)
break;
/*
* Normally we should not see an error, either
* from dnode_next_offset() or dbuf_hold_level()
* (except for ESRCH from dnode_next_offset).
* If there is an i/o error, then when we read
* this block in syncing context, it will use
* ZIO_FLAG_MUSTSUCCEED, and thus hang/panic according
* to the "failmode" property. dnode_next_offset()
* doesn't have a flag to indicate MUSTSUCCEED.
*/
if (err != 0)
break;
dnode_dirty_l1(dn, i, tx);
2008-11-20 20:01:55 +00:00
}
}
done:
/*
* Add this range to the dnode range list.
* We will finish up this free operation in the syncing phase.
*/
2008-11-20 20:01:55 +00:00
mutex_enter(&dn->dn_mtx);
{
int txgoff = tx->tx_txg & TXG_MASK;
if (dn->dn_free_ranges[txgoff] == NULL) {
dn->dn_free_ranges[txgoff] =
range_tree_create(NULL, NULL, &dn->dn_mtx);
}
range_tree_clear(dn->dn_free_ranges[txgoff], blkid, nblks);
range_tree_add(dn->dn_free_ranges[txgoff], blkid, nblks);
2008-11-20 20:01:55 +00:00
}
dprintf_dnode(dn, "blkid=%llu nblks=%llu txg=%llu\n",
blkid, nblks, tx->tx_txg);
2008-11-20 20:01:55 +00:00
mutex_exit(&dn->dn_mtx);
dbuf_free_range(dn, blkid, blkid + nblks - 1, tx);
2008-11-20 20:01:55 +00:00
dnode_setdirty(dn, tx);
out:
2008-11-20 20:01:55 +00:00
rw_exit(&dn->dn_struct_rwlock);
}
static boolean_t
dnode_spill_freed(dnode_t *dn)
{
int i;
mutex_enter(&dn->dn_mtx);
for (i = 0; i < TXG_SIZE; i++) {
if (dn->dn_rm_spillblk[i] == DN_KILL_SPILLBLK)
break;
}
mutex_exit(&dn->dn_mtx);
return (i < TXG_SIZE);
}
2008-11-20 20:01:55 +00:00
/* return TRUE if this blkid was freed in a recent txg, or FALSE if it wasn't */
uint64_t
dnode_block_freed(dnode_t *dn, uint64_t blkid)
{
void *dp = spa_get_dsl(dn->dn_objset->os_spa);
int i;
if (blkid == DMU_BONUS_BLKID)
2008-11-20 20:01:55 +00:00
return (FALSE);
/*
* If we're in the process of opening the pool, dp will not be
* set yet, but there shouldn't be anything dirty.
*/
if (dp == NULL)
return (FALSE);
if (dn->dn_free_txg)
return (TRUE);
if (blkid == DMU_SPILL_BLKID)
return (dnode_spill_freed(dn));
2008-11-20 20:01:55 +00:00
mutex_enter(&dn->dn_mtx);
for (i = 0; i < TXG_SIZE; i++) {
if (dn->dn_free_ranges[i] != NULL &&
range_tree_contains(dn->dn_free_ranges[i], blkid, 1))
2008-11-20 20:01:55 +00:00
break;
}
mutex_exit(&dn->dn_mtx);
return (i < TXG_SIZE);
}
/* call from syncing context when we actually write/free space for this dnode */
void
dnode_diduse_space(dnode_t *dn, int64_t delta)
{
uint64_t space;
dprintf_dnode(dn, "dn=%p dnp=%p used=%llu delta=%lld\n",
dn, dn->dn_phys,
(u_longlong_t)dn->dn_phys->dn_used,
(longlong_t)delta);
mutex_enter(&dn->dn_mtx);
space = DN_USED_BYTES(dn->dn_phys);
if (delta > 0) {
ASSERT3U(space + delta, >=, space); /* no overflow */
} else {
ASSERT3U(space, >=, -delta); /* no underflow */
}
space += delta;
if (spa_version(dn->dn_objset->os_spa) < SPA_VERSION_DNODE_BYTES) {
ASSERT((dn->dn_phys->dn_flags & DNODE_FLAG_USED_BYTES) == 0);
ASSERT0(P2PHASE(space, 1<<DEV_BSHIFT));
2008-11-20 20:01:55 +00:00
dn->dn_phys->dn_used = space >> DEV_BSHIFT;
} else {
dn->dn_phys->dn_used = space;
dn->dn_phys->dn_flags |= DNODE_FLAG_USED_BYTES;
}
mutex_exit(&dn->dn_mtx);
}
/*
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
* Call when we think we're going to write/free space in open context to track
* the amount of memory in use by the currently open txg.
2008-11-20 20:01:55 +00:00
*/
void
dnode_willuse_space(dnode_t *dn, int64_t space, dmu_tx_t *tx)
{
objset_t *os = dn->dn_objset;
2008-11-20 20:01:55 +00:00
dsl_dataset_t *ds = os->os_dsl_dataset;
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
int64_t aspace = spa_get_asize(os->os_spa, space);
2008-11-20 20:01:55 +00:00
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
if (ds != NULL) {
dsl_dir_willuse_space(ds->ds_dir, aspace, tx);
dsl_pool_dirty_space(dmu_tx_pool(tx), space, tx);
}
2008-11-20 20:01:55 +00:00
Illumos #4045 write throttle & i/o scheduler performance work 4045 zfs write throttle & i/o scheduler performance work 1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync read, sync write, async read, async write, and scrub/resilver. The scheduler issues a number of concurrent i/os from each class to the device. Once a class has been selected, an i/o is selected from this class using either an elevator algorithem (async, scrub classes) or FIFO (sync classes). The number of concurrent async write i/os is tuned dynamically based on i/o load, to achieve good sync i/o latency when there is not a high load of writes, and good write throughput when there is. See the block comment in vdev_queue.c (reproduced below) for more details. 2. The write throttle (dsl_pool_tempreserve_space() and txg_constrain_throughput()) is rewritten to produce much more consistent delays when under constant load. The new write throttle is based on the amount of dirty data, rather than guesses about future performance of the system. When there is a lot of dirty data, each transaction (e.g. write() syscall) will be delayed by the same small amount. This eliminates the "brick wall of wait" that the old write throttle could hit, causing all transactions to wait several seconds until the next txg opens. One of the keys to the new write throttle is decrementing the amount of dirty data as i/o completes, rather than at the end of spa_sync(). Note that the write throttle is only applied once the i/o scheduler is issuing the maximum number of outstanding async writes. See the block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for more details. This diff has several other effects, including: * the commonly-tuned global variable zfs_vdev_max_pending has been removed; use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead. * the size of each txg (meaning the amount of dirty data written, and thus the time it takes to write out) is now controlled differently. There is no longer an explicit time goal; the primary determinant is amount of dirty data. Systems that are under light or medium load will now often see that a txg is always syncing, but the impact to performance (e.g. read latency) is minimal. Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this. * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression, checksum, etc. This improves latency by not allowing these CPU-intensive tasks to consume all CPU (on machines with at least 4 CPU's; the percentage is rounded up). --matt APPENDIX: problems with the current i/o scheduler The current ZFS i/o scheduler (vdev_queue.c) is deadline based. The problem with this is that if there are always i/os pending, then certain classes of i/os can see very long delays. For example, if there are always synchronous reads outstanding, then no async writes will be serviced until they become "past due". One symptom of this situation is that each pass of the txg sync takes at least several seconds (typically 3 seconds). If many i/os become "past due" (their deadline is in the past), then we must service all of these overdue i/os before any new i/os. This happens when we enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in the future. If we can't complete all the i/os in 2.5 seconds (e.g. because there were always reads pending), then these i/os will become past due. Now we must service all the "async" writes (which could be hundreds of megabytes) before we service any reads, introducing considerable latency to synchronous i/os (reads or ZIL writes). Notes on porting to ZFS on Linux: - zio_t gained new members io_physdone and io_phys_children. Because object caches in the Linux port call the constructor only once at allocation time, objects may contain residual data when retrieved from the cache. Therefore zio_create() was updated to zero out the two new fields. - vdev_mirror_pending() relied on the depth of the per-vdev pending queue (vq->vq_pending_tree) to select the least-busy leaf vdev to read from. This tree has been replaced by vq->vq_active_tree which is now used for the same purpose. - vdev_queue_init() used the value of zfs_vdev_max_pending to determine the number of vdev I/O buffers to pre-allocate. That global no longer exists, so we instead use the sum of the *_max_active values for each of the five I/O classes described above. - The Illumos implementation of dmu_tx_delay() delays a transaction by sleeping in condition variable embedded in the thread (curthread->t_delay_cv). We do not have an equivalent CV to use in Linux, so this change replaced the delay logic with a wrapper called zfs_sleep_until(). This wrapper could be adopted upstream and in other downstream ports to abstract away operating system-specific delay logic. - These tunables are added as module parameters, and descriptions added to the zfs-module-parameters.5 man page. spa_asize_inflation zfs_deadman_synctime_ms zfs_vdev_max_active zfs_vdev_async_write_active_min_dirty_percent zfs_vdev_async_write_active_max_dirty_percent zfs_vdev_async_read_max_active zfs_vdev_async_read_min_active zfs_vdev_async_write_max_active zfs_vdev_async_write_min_active zfs_vdev_scrub_max_active zfs_vdev_scrub_min_active zfs_vdev_sync_read_max_active zfs_vdev_sync_read_min_active zfs_vdev_sync_write_max_active zfs_vdev_sync_write_min_active zfs_dirty_data_max_percent zfs_delay_min_dirty_percent zfs_dirty_data_max_max_percent zfs_dirty_data_max zfs_dirty_data_max_max zfs_dirty_data_sync zfs_delay_scale The latter four have type unsigned long, whereas they are uint64_t in Illumos. This accommodates Linux's module_param() supported types, but means they may overflow on 32-bit architectures. The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most likely to overflow on 32-bit systems, since they express physical RAM sizes in bytes. In fact, Illumos initializes zfs_dirty_data_max_max to 2^32 which does overflow. To resolve that, this port instead initializes it in arc_init() to 25% of physical RAM, and adds the tunable zfs_dirty_data_max_max_percent to override that percentage. While this solution doesn't completely avoid the overflow issue, it should be a reasonable default for most systems, and the minority of affected systems can work around the issue by overriding the defaults. - Fixed reversed logic in comment above zfs_delay_scale declaration. - Clarified comments in vdev_queue.c regarding when per-queue minimums take effect. - Replaced dmu_tx_write_limit in the dmu_tx kstat file with dmu_tx_dirty_delay and dmu_tx_dirty_over_max. The first counts how many times a transaction has been delayed because the pool dirty data has exceeded zfs_delay_min_dirty_percent. The latter counts how many times the pool dirty data has exceeded zfs_dirty_data_max (which we expect to never happen). - The original patch would have regressed the bug fixed in zfsonlinux/zfs@c418410, which prevented users from setting the zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE. A similar fix is added to vdev_queue_aggregate(). - In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the heap instead of the stack. In Linux we can't afford such large structures on the stack. Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Ned Bass <bass6@llnl.gov> Reviewed by: Brendan Gregg <brendan.gregg@joyent.com> Approved by: Robert Mustacchi <rm@joyent.com> References: http://www.illumos.org/issues/4045 illumos/illumos-gate@69962b5647e4a8b9b14998733b765925381b727e Ported-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1913
2013-08-29 03:01:20 +00:00
dmu_tx_willuse_space(tx, aspace);
2008-11-20 20:01:55 +00:00
}
2009-08-18 18:43:27 +00:00
/*
* Scans a block at the indicated "level" looking for a hole or data,
* depending on 'flags'.
*
* If level > 0, then we are scanning an indirect block looking at its
* pointers. If level == 0, then we are looking at a block of dnodes.
*
* If we don't find what we are looking for in the block, we return ESRCH.
* Otherwise, return with *offset pointing to the beginning (if searching
* forwards) or end (if searching backwards) of the range covered by the
* block pointer we matched on (or dnode).
2009-08-18 18:43:27 +00:00
*
* The basic search algorithm used below by dnode_next_offset() is to
* use this function to search up the block tree (widen the search) until
* we find something (i.e., we don't return ESRCH) and then search back
* down the tree (narrow the search) until we reach our original search
* level.
*/
2008-11-20 20:01:55 +00:00
static int
dnode_next_offset_level(dnode_t *dn, int flags, uint64_t *offset,
int lvl, uint64_t blkfill, uint64_t txg)
2008-11-20 20:01:55 +00:00
{
dmu_buf_impl_t *db = NULL;
void *data = NULL;
uint64_t epbs = dn->dn_phys->dn_indblkshift - SPA_BLKPTRSHIFT;
uint64_t epb = 1ULL << epbs;
uint64_t minfill, maxfill;
boolean_t hole;
int i, inc, error, span;
2008-11-20 20:01:55 +00:00
dprintf("probing object %llu offset %llx level %d of %u\n",
dn->dn_object, *offset, lvl, dn->dn_phys->dn_nlevels);
2009-07-02 22:44:48 +00:00
hole = ((flags & DNODE_FIND_HOLE) != 0);
inc = (flags & DNODE_FIND_BACKWARDS) ? -1 : 1;
ASSERT(txg == 0 || !hole);
2008-11-20 20:01:55 +00:00
if (lvl == dn->dn_phys->dn_nlevels) {
error = 0;
epb = dn->dn_phys->dn_nblkptr;
data = dn->dn_phys->dn_blkptr;
} else {
uint64_t blkid = dbuf_whichblock(dn, lvl, *offset);
error = dbuf_hold_impl(dn, lvl, blkid, TRUE, FALSE, FTAG, &db);
2008-11-20 20:01:55 +00:00
if (error) {
if (error != ENOENT)
return (error);
if (hole)
return (0);
/*
* This can only happen when we are searching up
* the block tree for data. We don't really need to
* adjust the offset, as we will just end up looking
* at the pointer to this block in its parent, and its
* going to be unallocated, so we will skip over it.
*/
return (SET_ERROR(ESRCH));
2008-11-20 20:01:55 +00:00
}
error = dbuf_read(db, NULL, DB_RF_CANFAIL | DB_RF_HAVESTRUCT);
if (error) {
dbuf_rele(db, FTAG);
return (error);
}
data = db->db.db_data;
}
if (db != NULL && txg != 0 && (db->db_blkptr == NULL ||
db->db_blkptr->blk_birth <= txg ||
BP_IS_HOLE(db->db_blkptr))) {
/*
* This can only happen when we are searching up the tree
* and these conditions mean that we need to keep climbing.
*/
error = SET_ERROR(ESRCH);
2008-11-20 20:01:55 +00:00
} else if (lvl == 0) {
dnode_phys_t *dnp = data;
span = DNODE_SHIFT;
ASSERT(dn->dn_type == DMU_OT_DNODE);
for (i = (*offset >> span) & (blkfill - 1);
i >= 0 && i < blkfill; i += inc) {
2009-07-02 22:44:48 +00:00
if ((dnp[i].dn_type == DMU_OT_NONE) == hole)
2008-11-20 20:01:55 +00:00
break;
*offset += (1ULL << span) * inc;
2008-11-20 20:01:55 +00:00
}
if (i < 0 || i == blkfill)
error = SET_ERROR(ESRCH);
2008-11-20 20:01:55 +00:00
} else {
blkptr_t *bp = data;
2009-08-18 18:43:27 +00:00
uint64_t start = *offset;
2008-11-20 20:01:55 +00:00
span = (lvl - 1) * epbs + dn->dn_datablkshift;
minfill = 0;
maxfill = blkfill << ((lvl - 1) * epbs);
if (hole)
maxfill--;
else
minfill++;
2009-08-18 18:43:27 +00:00
*offset = *offset >> span;
for (i = BF64_GET(*offset, 0, epbs);
i >= 0 && i < epb; i += inc) {
if (BP_GET_FILL(&bp[i]) >= minfill &&
BP_GET_FILL(&bp[i]) <= maxfill &&
(hole || bp[i].blk_birth > txg))
2008-11-20 20:01:55 +00:00
break;
2009-08-18 18:43:27 +00:00
if (inc > 0 || *offset > 0)
*offset += inc;
}
*offset = *offset << span;
if (inc < 0) {
/* traversing backwards; position offset at the end */
ASSERT3U(*offset, <=, start);
*offset = MIN(*offset + (1ULL << span) - 1, start);
} else if (*offset < start) {
*offset = start;
2008-11-20 20:01:55 +00:00
}
2009-08-18 18:43:27 +00:00
if (i < 0 || i >= epb)
error = SET_ERROR(ESRCH);
2008-11-20 20:01:55 +00:00
}
if (db)
dbuf_rele(db, FTAG);
return (error);
}
/*
* Find the next hole, data, or sparse region at or after *offset.
* The value 'blkfill' tells us how many items we expect to find
* in an L0 data block; this value is 1 for normal objects,
* DNODES_PER_BLOCK for the meta dnode, and some fraction of
* DNODES_PER_BLOCK when searching for sparse regions thereof.
*
* Examples:
*
* dnode_next_offset(dn, flags, offset, 1, 1, 0);
* Finds the next/previous hole/data in a file.
2008-11-20 20:01:55 +00:00
* Used in dmu_offset_next().
*
* dnode_next_offset(mdn, flags, offset, 0, DNODES_PER_BLOCK, txg);
2008-11-20 20:01:55 +00:00
* Finds the next free/allocated dnode an objset's meta-dnode.
* Only finds objects that have new contents since txg (ie.
* bonus buffer changes and content removal are ignored).
* Used in dmu_object_next().
*
* dnode_next_offset(mdn, DNODE_FIND_HOLE, offset, 2, DNODES_PER_BLOCK >> 2, 0);
2008-11-20 20:01:55 +00:00
* Finds the next L2 meta-dnode bp that's at most 1/4 full.
* Used in dmu_object_alloc().
*/
int
dnode_next_offset(dnode_t *dn, int flags, uint64_t *offset,
2008-11-20 20:01:55 +00:00
int minlvl, uint64_t blkfill, uint64_t txg)
{
uint64_t initial_offset = *offset;
2008-11-20 20:01:55 +00:00
int lvl, maxlvl;
int error = 0;
if (!(flags & DNODE_FIND_HAVELOCK))
rw_enter(&dn->dn_struct_rwlock, RW_READER);
2008-11-20 20:01:55 +00:00
if (dn->dn_phys->dn_nlevels == 0) {
error = SET_ERROR(ESRCH);
goto out;
2008-11-20 20:01:55 +00:00
}
if (dn->dn_datablkshift == 0) {
if (*offset < dn->dn_datablksz) {
if (flags & DNODE_FIND_HOLE)
2008-11-20 20:01:55 +00:00
*offset = dn->dn_datablksz;
} else {
error = SET_ERROR(ESRCH);
2008-11-20 20:01:55 +00:00
}
goto out;
2008-11-20 20:01:55 +00:00
}
maxlvl = dn->dn_phys->dn_nlevels;
for (lvl = minlvl; lvl <= maxlvl; lvl++) {
error = dnode_next_offset_level(dn,
flags, offset, lvl, blkfill, txg);
2008-11-20 20:01:55 +00:00
if (error != ESRCH)
break;
}
while (error == 0 && --lvl >= minlvl) {
2008-11-20 20:01:55 +00:00
error = dnode_next_offset_level(dn,
flags, offset, lvl, blkfill, txg);
2008-11-20 20:01:55 +00:00
}
/*
* There's always a "virtual hole" at the end of the object, even
* if all BP's which physically exist are non-holes.
*/
if ((flags & DNODE_FIND_HOLE) && error == ESRCH && txg == 0 &&
minlvl == 1 && blkfill == 1 && !(flags & DNODE_FIND_BACKWARDS)) {
error = 0;
}
if (error == 0 && (flags & DNODE_FIND_BACKWARDS ?
initial_offset < *offset : initial_offset > *offset))
error = SET_ERROR(ESRCH);
out:
if (!(flags & DNODE_FIND_HAVELOCK))
rw_exit(&dn->dn_struct_rwlock);
2008-11-20 20:01:55 +00:00
return (error);
}