Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
/* $FreeBSD$ */
|
|
|
|
|
/*-
|
|
|
|
|
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef _USB2_REQUEST_H_
|
|
|
|
|
#define _USB2_REQUEST_H_
|
|
|
|
|
|
2009-02-09 21:56:33 +00:00
|
|
|
struct usb2_process;
|
|
|
|
|
|
2008-12-11 23:13:02 +00:00
|
|
|
usb2_error_t usb2_do_request_flags(struct usb2_device *udev, struct mtx *mtx,
|
2009-03-20 21:50:54 +00:00
|
|
|
struct usb2_device_request *req, void *data, uint16_t flags,
|
|
|
|
|
uint16_t *actlen, usb2_timeout_t timeout);
|
2009-02-09 21:56:33 +00:00
|
|
|
usb2_error_t usb2_do_request_proc(struct usb2_device *udev, struct usb2_process *pproc,
|
2009-03-20 21:50:54 +00:00
|
|
|
struct usb2_device_request *req, void *data, uint16_t flags,
|
|
|
|
|
uint16_t *actlen, usb2_timeout_t timeout);
|
2008-12-11 23:13:02 +00:00
|
|
|
usb2_error_t usb2_req_clear_hub_feature(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, uint16_t sel);
|
|
|
|
|
usb2_error_t usb2_req_clear_port_feature(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, uint8_t port, uint16_t sel);
|
|
|
|
|
usb2_error_t usb2_req_get_alt_interface_no(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, uint8_t *alt_iface_no,
|
|
|
|
|
uint8_t iface_index);
|
|
|
|
|
usb2_error_t usb2_req_get_config(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
uint8_t *pconf);
|
|
|
|
|
usb2_error_t usb2_req_get_config_desc(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
struct usb2_config_descriptor *d, uint8_t conf_index);
|
|
|
|
|
usb2_error_t usb2_req_get_config_desc_full(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, struct usb2_config_descriptor **ppcd,
|
|
|
|
|
struct malloc_type *mtype, uint8_t conf_index);
|
|
|
|
|
usb2_error_t usb2_req_get_desc(struct usb2_device *udev, struct mtx *mtx,
|
2009-02-24 03:40:48 +00:00
|
|
|
uint16_t *actlen, void *desc, uint16_t min_len,
|
|
|
|
|
uint16_t max_len, uint16_t id, uint8_t type,
|
|
|
|
|
uint8_t index, uint8_t retries);
|
2008-12-11 23:13:02 +00:00
|
|
|
usb2_error_t usb2_req_get_device_desc(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
struct usb2_device_descriptor *d);
|
|
|
|
|
usb2_error_t usb2_req_get_device_status(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, struct usb2_status *st);
|
|
|
|
|
usb2_error_t usb2_req_get_hub_descriptor(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, struct usb2_hub_descriptor *hd,
|
|
|
|
|
uint8_t nports);
|
|
|
|
|
usb2_error_t usb2_req_get_hub_status(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
struct usb2_hub_status *st);
|
|
|
|
|
usb2_error_t usb2_req_get_port_status(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
struct usb2_port_status *ps, uint8_t port);
|
|
|
|
|
usb2_error_t usb2_req_get_report(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
void *data, uint16_t len, uint8_t iface_index, uint8_t type,
|
|
|
|
|
uint8_t id);
|
|
|
|
|
usb2_error_t usb2_req_get_report_descriptor(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, void *d, uint16_t size,
|
|
|
|
|
uint8_t iface_index);
|
|
|
|
|
usb2_error_t usb2_req_get_string_any(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
char *buf, uint16_t len, uint8_t string_index);
|
|
|
|
|
usb2_error_t usb2_req_get_string_desc(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
void *sdesc, uint16_t max_len, uint16_t lang_id,
|
|
|
|
|
uint8_t string_index);
|
|
|
|
|
usb2_error_t usb2_req_reset_port(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
uint8_t port);
|
|
|
|
|
usb2_error_t usb2_req_set_address(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
uint16_t addr);
|
|
|
|
|
usb2_error_t usb2_req_set_alt_interface_no(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, uint8_t iface_index, uint8_t alt_no);
|
|
|
|
|
usb2_error_t usb2_req_set_config(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
uint8_t conf);
|
|
|
|
|
usb2_error_t usb2_req_set_hub_feature(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
uint16_t sel);
|
|
|
|
|
usb2_error_t usb2_req_set_idle(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
uint8_t iface_index, uint8_t duration, uint8_t id);
|
|
|
|
|
usb2_error_t usb2_req_set_port_feature(struct usb2_device *udev,
|
|
|
|
|
struct mtx *mtx, uint8_t port, uint16_t sel);
|
|
|
|
|
usb2_error_t usb2_req_set_protocol(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
uint8_t iface_index, uint16_t report);
|
|
|
|
|
usb2_error_t usb2_req_set_report(struct usb2_device *udev, struct mtx *mtx,
|
|
|
|
|
void *data, uint16_t len, uint8_t iface_index,
|
|
|
|
|
uint8_t type, uint8_t id);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
usb2_error_t usb2_req_re_enumerate(struct usb2_device *udev, struct mtx *mtx);
|
2009-01-04 00:12:01 +00:00
|
|
|
usb2_error_t usb2_req_clear_device_feature(struct usb2_device *udev, struct mtx *mtx, uint16_t sel);
|
|
|
|
|
usb2_error_t usb2_req_set_device_feature(struct usb2_device *udev, struct mtx *mtx, uint16_t sel);
|
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config
file.
2.b) Add the following USB device options to your kernel configuration
file:
# USB core support
device usb2_core
# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci
# USB mass storage support
device usb2_storage
device usb2_storage_mass
# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav
# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd
# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom
# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng
# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms
# USB sound and MIDI device support
device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred
2008-11-04 02:31:03 +00:00
|
|
|
|
|
|
|
|
#define usb2_do_request(u,m,r,d) \
|
|
|
|
|
usb2_do_request_flags(u,m,r,d,0,NULL,USB_DEFAULT_TIMEOUT)
|
|
|
|
|
|
|
|
|
|
#endif /* _USB2_REQUEST_H_ */
|
