freebsd-nq/contrib/tcpdump/gmpls.c

198 lines
6.0 KiB
C
Raw Normal View History

/*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that: (1) source code
* distributions retain the above copyright notice and this paragraph
* in its entirety, and (2) distributions including binary code include
* the above copyright notice and this paragraph in its entirety in
* the documentation or other materials provided with the distribution.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND
* WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
* LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
* Original code by Hannes Gredler (hannes@juniper.net)
*/
#ifndef lint
static const char rcsid[] _U_ =
2009-03-21 16:23:46 +00:00
"@(#) $Header: /tcpdump/master/tcpdump/gmpls.c,v 1.7 2006-04-14 07:11:59 hannes Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <tcpdump-stdinc.h>
#include "interface.h"
2009-03-21 16:23:46 +00:00
#include "gmpls.h"
/* rfc3471 */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok gmpls_link_prot_values[] = {
{ 0x01, "Extra Traffic"},
{ 0x02, "Unprotected"},
{ 0x04, "Shared"},
{ 0x08, "Dedicated 1:1"},
{ 0x10, "Dedicated 1+1"},
{ 0x20, "Enhanced"},
{ 0x40, "Reserved"},
{ 0x80, "Reserved"},
{ 0, NULL }
};
/* rfc3471 */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok gmpls_switch_cap_values[] = {
2009-03-21 16:23:46 +00:00
{ GMPLS_PSC1, "Packet-Switch Capable-1"},
{ GMPLS_PSC2, "Packet-Switch Capable-2"},
{ GMPLS_PSC3, "Packet-Switch Capable-3"},
{ GMPLS_PSC4, "Packet-Switch Capable-4"},
{ GMPLS_L2SC, "Layer-2 Switch Capable"},
{ GMPLS_TSC, "Time-Division-Multiplex"},
{ GMPLS_LSC, "Lambda-Switch Capable"},
{ GMPLS_FSC, "Fiber-Switch Capable"},
{ 0, NULL }
};
/* rfc4205 */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok gmpls_switch_cap_tsc_indication_values[] = {
2009-03-21 16:23:46 +00:00
{ 0, "Standard SONET/SDH" },
{ 1, "Arbitrary SONET/SDH" },
{ 0, NULL }
};
/* rfc3471 */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok gmpls_encoding_values[] = {
{ 1, "Packet"},
{ 2, "Ethernet V2/DIX"},
{ 3, "ANSI/ETSI PDH"},
{ 4, "Reserved"},
{ 5, "SDH ITU-T G.707/SONET ANSI T1.105"},
{ 6, "Reserved"},
{ 7, "Digital Wrapper"},
{ 8, "Lambda (photonic)"},
{ 9, "Fiber"},
{ 10, "Reserved"},
{ 11, "FiberChannel"},
{ 0, NULL }
};
/* rfc3471 */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok gmpls_payload_values[] = {
{ 0, "Unknown"},
{ 1, "Reserved"},
{ 2, "Reserved"},
{ 3, "Reserved"},
{ 4, "Reserved"},
{ 5, "Asynchronous mapping of E4"},
{ 6, "Asynchronous mapping of DS3/T3"},
{ 7, "Asynchronous mapping of E3"},
{ 8, "Bit synchronous mapping of E3"},
{ 9, "Byte synchronous mapping of E3"},
{ 10, "Asynchronous mapping of DS2/T2"},
{ 11, "Bit synchronous mapping of DS2/T2"},
{ 12, "Reserved"},
{ 13, "Asynchronous mapping of E1"},
{ 14, "Byte synchronous mapping of E1"},
{ 15, "Byte synchronous mapping of 31 * DS0"},
{ 16, "Asynchronous mapping of DS1/T1"},
{ 17, "Bit synchronous mapping of DS1/T1"},
{ 18, "Byte synchronous mapping of DS1/T1"},
{ 19, "VC-11 in VC-12"},
{ 20, "Reserved"},
{ 21, "Reserved"},
{ 22, "DS1 SF Asynchronous"},
{ 23, "DS1 ESF Asynchronous"},
{ 24, "DS3 M23 Asynchronous"},
{ 25, "DS3 C-Bit Parity Asynchronous"},
{ 26, "VT/LOVC"},
{ 27, "STS SPE/HOVC"},
{ 28, "POS - No Scrambling, 16 bit CRC"},
{ 29, "POS - No Scrambling, 32 bit CRC"},
{ 30, "POS - Scrambling, 16 bit CRC"},
{ 31, "POS - Scrambling, 32 bit CRC"},
{ 32, "ATM mapping"},
{ 33, "Ethernet PHY"},
{ 34, "SONET/SDH"},
{ 35, "Reserved (SONET deprecated)"},
{ 36, "Digital Wrapper"},
{ 37, "Lambda"},
{ 38, "ANSI/ETSI PDH"},
{ 39, "Reserved"},
{ 40, "Link Access Protocol SDH (X.85 and X.86)"},
{ 41, "FDDI"},
{ 42, "DQDB (ETSI ETS 300 216)"},
{ 43, "FiberChannel-3 (Services)"},
{ 44, "HDLC"},
{ 45, "Ethernet V2/DIX (only)"},
{ 46, "Ethernet 802.3 (only)"},
/* draft-ietf-ccamp-gmpls-g709-04.txt */
{ 47, "G.709 ODUj"},
{ 48, "G.709 OTUk(v)"},
{ 49, "CBR/CBRa"},
{ 50, "CBRb"},
{ 51, "BSOT"},
{ 52, "BSNT"},
{ 53, "IP/PPP (GFP)"},
{ 54, "Ethernet MAC (framed GFP)"},
{ 55, "Ethernet PHY (transparent GFP)"},
{ 56, "ESCON"},
{ 57, "FICON"},
{ 58, "Fiber Channel"},
{ 0, NULL }
};
/*
* Link Type values used by LMP Service Discovery (specifically, the Client
* Port Service Attributes Object). See UNI 1.0 section 9.4.2 for details.
*/
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok lmp_sd_service_config_cpsa_link_type_values[] = {
{ 5, "SDH ITU-T G.707"},
{ 6, "SONET ANSI T1.105"},
{ 0, NULL}
};
/*
* Signal Type values for SDH links used by LMP Service Discovery (specifically,
* the Client Port Service Attributes Object). See UNI 1.0 section 9.4.2 for
* details.
*/
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok lmp_sd_service_config_cpsa_signal_type_sdh_values[] = {
{ 5, "VC-3"},
{ 6, "VC-4"},
{ 7, "STM-0"},
{ 8, "STM-1"},
{ 9, "STM-4"},
{ 10, "STM-16"},
{ 11, "STM-64"},
{ 12, "STM-256"},
{ 0, NULL}
};
/*
* Signal Type values for SONET links used by LMP Service Discovery (specifically,
* the Client Port Service Attributes Object). See UNI 1.0 section 9.4.2 for
* details.
*/
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok lmp_sd_service_config_cpsa_signal_type_sonet_values[] = {
{ 5, "STS-1 SPE"},
{ 6, "STS-3c SPE"},
{ 7, "STS-1"},
{ 8, "STM-3"},
{ 9, "STM-12"},
{ 10, "STM-48"},
{ 11, "STM-192"},
{ 12, "STM-768"},
{ 0, NULL}
};
#define DIFFSERV_BC_MODEL_RDM 0 /* draft-ietf-tewg-diff-te-proto-07 */
#define DIFFSERV_BC_MODEL_MAM 1 /* draft-ietf-tewg-diff-te-proto-07 */
#define DIFFSERV_BC_MODEL_EXTD_MAM 254 /* experimental */
Update tcpdump to 4.1.1. Changes: Thu. April 1, 2010. guy@alum.mit.edu. Summary for 4.1.1 tcpdump release Fix build on systems with PF, such as FreeBSD and OpenBSD. Don't blow up if a zero-length link-layer address is passed to linkaddr_string(). Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu. Summary for 4.1.0 tcpdump release Fix printing of MAC addresses for VLAN frames with a length field Add some additional bounds checks and use the EXTRACT_ macros more Add a -b flag to print the AS number in BGP packets in ASDOT notation rather than ASPLAIN notation Add ICMPv6 RFC 5006 support Decode the access flags in NFS access requests Handle the new DLT_ for memory-mapped USB captures on Linux Make the default snapshot (-s) the maximum Print name of device (when -L is used) Support for OpenSolaris (and SXCE build 125 and later) Print new TCP flags Add support for RPL DIO Add support for TCP User Timeout (UTO) Add support for non-standard Ethertypes used by 3com PPPoE gear Add support for 802.11n and 802.11s Add support for Transparent Ethernet Bridge ethertype in GRE Add 4 byte AS support for BGP printer Add support for the MDT SAFI 66 BG printer Add basic IPv6 support to print-olsr Add USB printer Add printer for ForCES Handle frames with an FCS Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames Fix TCP sequence number printing Report 802.2 packets as 802.2 instead of 802.3 Don't include -L/usr/lib in LDFLAGS On x86_64 Linux, look in lib64 directory too Lots of code clean ups Autoconf clean ups Update testcases to make output changes Fix compiling with/out smi (--with{,out}-smi) Fix compiling without IPv6 support (--disable-ipv6)
2010-10-28 16:23:25 +00:00
const struct tok diffserv_te_bc_values[] = {
{ DIFFSERV_BC_MODEL_RDM, "Russian dolls"},
{ DIFFSERV_BC_MODEL_MAM, "Maximum allocation"},
{ DIFFSERV_BC_MODEL_EXTD_MAM, "Maximum allocation with E-LSP support"},
{ 0, NULL }
};