2009-03-01 22:10:07 +00:00
|
|
|
/*
|
|
|
|
* WPA Supplicant - Scanning
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
* Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
|
2009-03-01 22:10:07 +00:00
|
|
|
*
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
* This software may be distributed under the terms of the BSD license.
|
|
|
|
* See README for more details.
|
2009-03-01 22:10:07 +00:00
|
|
|
*/
|
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
#include "utils/includes.h"
|
2009-03-01 22:10:07 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
#include "utils/common.h"
|
|
|
|
#include "utils/eloop.h"
|
|
|
|
#include "common/ieee802_11_defs.h"
|
2009-03-01 22:10:07 +00:00
|
|
|
#include "config.h"
|
|
|
|
#include "wpa_supplicant_i.h"
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
#include "driver_i.h"
|
2009-03-01 22:10:07 +00:00
|
|
|
#include "wps_supplicant.h"
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#include "p2p_supplicant.h"
|
|
|
|
#include "p2p/p2p.h"
|
|
|
|
#include "hs20_supplicant.h"
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
#include "notify.h"
|
|
|
|
#include "bss.h"
|
|
|
|
#include "scan.h"
|
2009-03-01 22:10:07 +00:00
|
|
|
|
|
|
|
|
|
|
|
static void wpa_supplicant_gen_assoc_event(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
struct wpa_ssid *ssid;
|
|
|
|
union wpa_event_data data;
|
|
|
|
|
|
|
|
ssid = wpa_supplicant_get_ssid(wpa_s);
|
|
|
|
if (ssid == NULL)
|
|
|
|
return;
|
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
if (wpa_s->current_ssid == NULL) {
|
2009-03-01 22:10:07 +00:00
|
|
|
wpa_s->current_ssid = ssid;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
if (wpa_s->current_ssid != NULL)
|
|
|
|
wpas_notify_network_changed(wpa_s);
|
|
|
|
}
|
2009-03-01 22:10:07 +00:00
|
|
|
wpa_supplicant_initiate_eapol(wpa_s);
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Already associated with a configured "
|
|
|
|
"network - generating associated event");
|
2009-03-01 22:10:07 +00:00
|
|
|
os_memset(&data, 0, sizeof(data));
|
|
|
|
wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_WPS
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
static int wpas_wps_in_use(struct wpa_supplicant *wpa_s,
|
2009-03-01 22:10:07 +00:00
|
|
|
enum wps_request_type *req_type)
|
|
|
|
{
|
|
|
|
struct wpa_ssid *ssid;
|
|
|
|
int wps = 0;
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
|
2009-03-01 22:10:07 +00:00
|
|
|
if (!(ssid->key_mgmt & WPA_KEY_MGMT_WPS))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
wps = 1;
|
|
|
|
*req_type = wpas_wps_get_req_type(ssid);
|
|
|
|
if (!ssid->eap.phase1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (os_strstr(ssid->eap.phase1, "pbc=1"))
|
|
|
|
return 2;
|
|
|
|
}
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
if (!wpa_s->global->p2p_disabled && wpa_s->global->p2p &&
|
|
|
|
!wpa_s->conf->p2p_disabled) {
|
|
|
|
wpa_s->wps->dev.p2p = 1;
|
|
|
|
if (!wps) {
|
|
|
|
wps = 1;
|
|
|
|
*req_type = WPS_REQ_ENROLLEE_INFO;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
2009-03-01 22:10:07 +00:00
|
|
|
return wps;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_WPS */
|
|
|
|
|
2010-06-13 20:32:04 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_supplicant_enabled_networks - Check whether there are enabled networks
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* Returns: 0 if no networks are enabled, >0 if networks are enabled
|
|
|
|
*
|
|
|
|
* This function is used to figure out whether any networks (or Interworking
|
|
|
|
* with enabled credentials and auto_interworking) are present in the current
|
|
|
|
* configuration.
|
|
|
|
*/
|
|
|
|
int wpa_supplicant_enabled_networks(struct wpa_supplicant *wpa_s)
|
2010-06-13 20:32:04 +00:00
|
|
|
{
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
struct wpa_ssid *ssid = wpa_s->conf->ssid;
|
|
|
|
int count = 0, disabled = 0;
|
2010-06-13 20:32:04 +00:00
|
|
|
while (ssid) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (!wpas_network_disabled(wpa_s, ssid))
|
|
|
|
count++;
|
|
|
|
else
|
|
|
|
disabled++;
|
2010-06-13 20:32:04 +00:00
|
|
|
ssid = ssid->next;
|
|
|
|
}
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (wpa_s->conf->cred && wpa_s->conf->interworking &&
|
|
|
|
wpa_s->conf->auto_interworking)
|
|
|
|
count++;
|
|
|
|
if (count == 0 && disabled > 0) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks (%d disabled "
|
|
|
|
"networks)", disabled);
|
|
|
|
}
|
|
|
|
return count;
|
2010-06-13 20:32:04 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
static void wpa_supplicant_assoc_try(struct wpa_supplicant *wpa_s,
|
|
|
|
struct wpa_ssid *ssid)
|
|
|
|
{
|
|
|
|
while (ssid) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (!wpas_network_disabled(wpa_s, ssid))
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
break;
|
|
|
|
ssid = ssid->next;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ap_scan=2 mode - try to associate with each SSID. */
|
|
|
|
if (ssid == NULL) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "wpa_supplicant_assoc_try: Reached "
|
|
|
|
"end of scan list - go back to beginning");
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
|
|
|
|
wpa_supplicant_req_scan(wpa_s, 0, 0);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
if (ssid->next) {
|
|
|
|
/* Continue from the next SSID on the next attempt. */
|
|
|
|
wpa_s->prev_scan_ssid = ssid;
|
|
|
|
} else {
|
|
|
|
/* Start from the beginning of the SSID list. */
|
|
|
|
wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
|
|
|
|
}
|
|
|
|
wpa_supplicant_associate(wpa_s, NULL, ssid);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int int_array_len(const int *a)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
for (i = 0; a && a[i]; i++)
|
|
|
|
;
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void int_array_concat(int **res, const int *a)
|
|
|
|
{
|
|
|
|
int reslen, alen, i;
|
|
|
|
int *n;
|
|
|
|
|
|
|
|
reslen = int_array_len(*res);
|
|
|
|
alen = int_array_len(a);
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
n = os_realloc_array(*res, reslen + alen + 1, sizeof(int));
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
if (n == NULL) {
|
|
|
|
os_free(*res);
|
|
|
|
*res = NULL;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
for (i = 0; i <= alen; i++)
|
|
|
|
n[reslen + i] = a[i];
|
|
|
|
*res = n;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int freq_cmp(const void *a, const void *b)
|
|
|
|
{
|
|
|
|
int _a = *(int *) a;
|
|
|
|
int _b = *(int *) b;
|
|
|
|
|
|
|
|
if (_a == 0)
|
|
|
|
return 1;
|
|
|
|
if (_b == 0)
|
|
|
|
return -1;
|
|
|
|
return _a - _b;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void int_array_sort_unique(int *a)
|
|
|
|
{
|
|
|
|
int alen;
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
if (a == NULL)
|
|
|
|
return;
|
|
|
|
|
|
|
|
alen = int_array_len(a);
|
|
|
|
qsort(a, alen, sizeof(int), freq_cmp);
|
|
|
|
|
|
|
|
i = 0;
|
|
|
|
j = 1;
|
|
|
|
while (a[i] && a[j]) {
|
|
|
|
if (a[i] == a[j]) {
|
|
|
|
j++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
a[++i] = a[j++];
|
|
|
|
}
|
|
|
|
if (a[i])
|
|
|
|
i++;
|
|
|
|
a[i] = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_supplicant_trigger_scan - Request driver to start a scan
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* @params: Scan parameters
|
|
|
|
* Returns: 0 on success, -1 on failure
|
|
|
|
*/
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
int wpa_supplicant_trigger_scan(struct wpa_supplicant *wpa_s,
|
|
|
|
struct wpa_driver_scan_params *params)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
wpa_supplicant_notify_scanning(wpa_s, 1);
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
ret = wpa_drv_scan(wpa_s, params);
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
if (ret) {
|
|
|
|
wpa_supplicant_notify_scanning(wpa_s, 0);
|
|
|
|
wpas_notify_scan_done(wpa_s, 0);
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
} else {
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
wpa_s->scan_runs++;
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_s->normal_scans++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
wpa_supplicant_delayed_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx)
|
|
|
|
{
|
|
|
|
struct wpa_supplicant *wpa_s = eloop_ctx;
|
|
|
|
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Starting delayed sched scan");
|
|
|
|
|
|
|
|
if (wpa_supplicant_req_sched_scan(wpa_s))
|
|
|
|
wpa_supplicant_req_scan(wpa_s, 0, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
wpa_supplicant_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx)
|
|
|
|
{
|
|
|
|
struct wpa_supplicant *wpa_s = eloop_ctx;
|
|
|
|
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Sched scan timeout - stopping it");
|
|
|
|
|
|
|
|
wpa_s->sched_scan_timed_out = 1;
|
|
|
|
wpa_supplicant_cancel_sched_scan(wpa_s);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
wpa_supplicant_start_sched_scan(struct wpa_supplicant *wpa_s,
|
|
|
|
struct wpa_driver_scan_params *params,
|
|
|
|
int interval)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
wpa_supplicant_notify_scanning(wpa_s, 1);
|
|
|
|
ret = wpa_drv_sched_scan(wpa_s, params, interval * 1000);
|
|
|
|
if (ret)
|
|
|
|
wpa_supplicant_notify_scanning(wpa_s, 0);
|
|
|
|
else
|
|
|
|
wpa_s->sched_scanning = 1;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int wpa_supplicant_stop_sched_scan(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = wpa_drv_stop_sched_scan(wpa_s);
|
|
|
|
if (ret) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "stopping sched_scan failed!");
|
|
|
|
/* TODO: what to do if stopping fails? */
|
|
|
|
return -1;
|
|
|
|
}
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static struct wpa_driver_scan_filter *
|
|
|
|
wpa_supplicant_build_filter_ssids(struct wpa_config *conf, size_t *num_ssids)
|
|
|
|
{
|
|
|
|
struct wpa_driver_scan_filter *ssids;
|
|
|
|
struct wpa_ssid *ssid;
|
|
|
|
size_t count;
|
|
|
|
|
|
|
|
*num_ssids = 0;
|
|
|
|
if (!conf->filter_ssids)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
for (count = 0, ssid = conf->ssid; ssid; ssid = ssid->next) {
|
|
|
|
if (ssid->ssid && ssid->ssid_len)
|
|
|
|
count++;
|
|
|
|
}
|
|
|
|
if (count == 0)
|
|
|
|
return NULL;
|
|
|
|
ssids = os_zalloc(count * sizeof(struct wpa_driver_scan_filter));
|
|
|
|
if (ssids == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
for (ssid = conf->ssid; ssid; ssid = ssid->next) {
|
|
|
|
if (!ssid->ssid || !ssid->ssid_len)
|
|
|
|
continue;
|
|
|
|
os_memcpy(ssids[*num_ssids].ssid, ssid->ssid, ssid->ssid_len);
|
|
|
|
ssids[*num_ssids].ssid_len = ssid->ssid_len;
|
|
|
|
(*num_ssids)++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ssids;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
static void wpa_supplicant_optimize_freqs(
|
|
|
|
struct wpa_supplicant *wpa_s, struct wpa_driver_scan_params *params)
|
2009-03-01 22:10:07 +00:00
|
|
|
{
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
if (params->freqs == NULL && wpa_s->p2p_in_provisioning &&
|
|
|
|
wpa_s->go_params) {
|
|
|
|
/* Optimize provisioning state scan based on GO information */
|
|
|
|
if (wpa_s->p2p_in_provisioning < 5 &&
|
|
|
|
wpa_s->go_params->freq > 0) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only GO "
|
|
|
|
"preferred frequency %d MHz",
|
|
|
|
wpa_s->go_params->freq);
|
|
|
|
params->freqs = os_zalloc(2 * sizeof(int));
|
|
|
|
if (params->freqs)
|
|
|
|
params->freqs[0] = wpa_s->go_params->freq;
|
|
|
|
} else if (wpa_s->p2p_in_provisioning < 8 &&
|
|
|
|
wpa_s->go_params->freq_list[0]) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only common "
|
|
|
|
"channels");
|
|
|
|
int_array_concat(¶ms->freqs,
|
|
|
|
wpa_s->go_params->freq_list);
|
|
|
|
if (params->freqs)
|
|
|
|
int_array_sort_unique(params->freqs);
|
|
|
|
}
|
|
|
|
wpa_s->p2p_in_provisioning++;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
|
|
|
#ifdef CONFIG_WPS
|
|
|
|
if (params->freqs == NULL && wpa_s->after_wps && wpa_s->wps_freq) {
|
|
|
|
/*
|
|
|
|
* Optimize post-provisioning scan based on channel used
|
|
|
|
* during provisioning.
|
|
|
|
*/
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz "
|
|
|
|
"that was used during provisioning", wpa_s->wps_freq);
|
|
|
|
params->freqs = os_zalloc(2 * sizeof(int));
|
|
|
|
if (params->freqs)
|
|
|
|
params->freqs[0] = wpa_s->wps_freq;
|
|
|
|
wpa_s->after_wps--;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (params->freqs == NULL && wpa_s->known_wps_freq && wpa_s->wps_freq)
|
|
|
|
{
|
|
|
|
/* Optimize provisioning scan based on already known channel */
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz",
|
|
|
|
wpa_s->wps_freq);
|
|
|
|
params->freqs = os_zalloc(2 * sizeof(int));
|
|
|
|
if (params->freqs)
|
|
|
|
params->freqs[0] = wpa_s->wps_freq;
|
|
|
|
wpa_s->known_wps_freq = 0; /* only do this once */
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_WPS */
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_INTERWORKING
|
|
|
|
static void wpas_add_interworking_elements(struct wpa_supplicant *wpa_s,
|
|
|
|
struct wpabuf *buf)
|
|
|
|
{
|
|
|
|
if (wpa_s->conf->interworking == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
wpabuf_put_u8(buf, WLAN_EID_EXT_CAPAB);
|
|
|
|
wpabuf_put_u8(buf, 4);
|
|
|
|
wpabuf_put_u8(buf, 0x00);
|
|
|
|
wpabuf_put_u8(buf, 0x00);
|
|
|
|
wpabuf_put_u8(buf, 0x00);
|
|
|
|
wpabuf_put_u8(buf, 0x80); /* Bit 31 - Interworking */
|
|
|
|
|
|
|
|
wpabuf_put_u8(buf, WLAN_EID_INTERWORKING);
|
|
|
|
wpabuf_put_u8(buf, is_zero_ether_addr(wpa_s->conf->hessid) ? 1 :
|
|
|
|
1 + ETH_ALEN);
|
|
|
|
wpabuf_put_u8(buf, wpa_s->conf->access_network_type);
|
|
|
|
/* No Venue Info */
|
|
|
|
if (!is_zero_ether_addr(wpa_s->conf->hessid))
|
|
|
|
wpabuf_put_data(buf, wpa_s->conf->hessid, ETH_ALEN);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_INTERWORKING */
|
|
|
|
|
|
|
|
|
|
|
|
static struct wpabuf * wpa_supplicant_extra_ies(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
struct wpabuf *extra_ie = NULL;
|
2009-03-01 22:10:07 +00:00
|
|
|
#ifdef CONFIG_WPS
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
int wps = 0;
|
2009-03-01 22:10:07 +00:00
|
|
|
enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO;
|
|
|
|
#endif /* CONFIG_WPS */
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
|
|
|
|
#ifdef CONFIG_INTERWORKING
|
|
|
|
if (wpa_s->conf->interworking &&
|
|
|
|
wpabuf_resize(&extra_ie, 100) == 0)
|
|
|
|
wpas_add_interworking_elements(wpa_s, extra_ie);
|
|
|
|
#endif /* CONFIG_INTERWORKING */
|
|
|
|
|
|
|
|
#ifdef CONFIG_WPS
|
|
|
|
wps = wpas_wps_in_use(wpa_s, &req_type);
|
|
|
|
|
|
|
|
if (wps) {
|
|
|
|
struct wpabuf *wps_ie;
|
|
|
|
wps_ie = wps_build_probe_req_ie(wps == 2 ? DEV_PW_PUSHBUTTON :
|
|
|
|
DEV_PW_DEFAULT,
|
|
|
|
&wpa_s->wps->dev,
|
|
|
|
wpa_s->wps->uuid, req_type,
|
|
|
|
0, NULL);
|
|
|
|
if (wps_ie) {
|
|
|
|
if (wpabuf_resize(&extra_ie, wpabuf_len(wps_ie)) == 0)
|
|
|
|
wpabuf_put_buf(extra_ie, wps_ie);
|
|
|
|
wpabuf_free(wps_ie);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
if (wps) {
|
|
|
|
size_t ielen = p2p_scan_ie_buf_len(wpa_s->global->p2p);
|
|
|
|
if (wpabuf_resize(&extra_ie, ielen) == 0)
|
|
|
|
wpas_p2p_scan_ie(wpa_s, extra_ie);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
|
|
|
#endif /* CONFIG_WPS */
|
|
|
|
|
|
|
|
return extra_ie;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check whether there are any enabled networks or credentials that could be
|
|
|
|
* used for a non-P2P connection.
|
|
|
|
*/
|
|
|
|
static int non_p2p_network_enabled(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
struct wpa_ssid *ssid;
|
|
|
|
|
|
|
|
for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
|
|
|
|
if (wpas_network_disabled(wpa_s, ssid))
|
|
|
|
continue;
|
|
|
|
if (!ssid->p2p_group)
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wpa_s->conf->cred && wpa_s->conf->interworking &&
|
|
|
|
wpa_s->conf->auto_interworking)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Find the operating frequency of any other virtual interface that is using
|
|
|
|
* the same radio concurrently.
|
|
|
|
*/
|
|
|
|
static int shared_vif_oper_freq(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
const char *rn, *rn2;
|
|
|
|
struct wpa_supplicant *ifs;
|
|
|
|
u8 bssid[ETH_ALEN];
|
|
|
|
|
|
|
|
if (!wpa_s->driver->get_radio_name)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
rn = wpa_s->driver->get_radio_name(wpa_s->drv_priv);
|
|
|
|
if (rn == NULL || rn[0] == '\0')
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
for (ifs = wpa_s->global->ifaces; ifs; ifs = ifs->next) {
|
|
|
|
if (ifs == wpa_s || !ifs->driver->get_radio_name)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
rn2 = ifs->driver->get_radio_name(ifs->drv_priv);
|
|
|
|
if (!rn2 || os_strcmp(rn, rn2) != 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (ifs->current_ssid == NULL || ifs->assoc_freq == 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (ifs->current_ssid->mode == WPAS_MODE_AP ||
|
|
|
|
ifs->current_ssid->mode == WPAS_MODE_P2P_GO)
|
|
|
|
return ifs->current_ssid->frequency;
|
|
|
|
if (wpa_drv_get_bssid(ifs, bssid) == 0)
|
|
|
|
return ifs->assoc_freq;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
|
|
|
|
|
|
|
static void wpa_supplicant_scan(void *eloop_ctx, void *timeout_ctx)
|
|
|
|
{
|
|
|
|
struct wpa_supplicant *wpa_s = eloop_ctx;
|
|
|
|
struct wpa_ssid *ssid;
|
|
|
|
enum scan_req_type scan_req = NORMAL_SCAN_REQ;
|
|
|
|
int ret;
|
|
|
|
struct wpabuf *extra_ie = NULL;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
struct wpa_driver_scan_params params;
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
struct wpa_driver_scan_params *scan_params;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
size_t max_ssids;
|
|
|
|
enum wpa_states prev_state;
|
2009-03-01 22:10:07 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (wpa_s->wpa_state == WPA_INTERFACE_DISABLED) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Skip scan - interface disabled");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wpa_s->disconnected && wpa_s->scan_req == NORMAL_SCAN_REQ) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Disconnected - do not scan");
|
2010-06-13 20:32:04 +00:00
|
|
|
wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
|
2009-03-01 22:10:07 +00:00
|
|
|
return;
|
|
|
|
}
|
2010-06-13 20:32:04 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (!wpa_supplicant_enabled_networks(wpa_s) &&
|
|
|
|
wpa_s->scan_req == NORMAL_SCAN_REQ) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks - do not scan");
|
2009-03-01 22:10:07 +00:00
|
|
|
wpa_supplicant_set_state(wpa_s, WPA_INACTIVE);
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
wpa_s->sta_scan_pending = 0;
|
|
|
|
#endif /* CONFIG_P2P */
|
2009-03-01 22:10:07 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wpa_s->conf->ap_scan != 0 &&
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
(wpa_s->drv_flags & WPA_DRIVER_FLAGS_WIRED)) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Using wired authentication - "
|
|
|
|
"overriding ap_scan configuration");
|
2009-03-01 22:10:07 +00:00
|
|
|
wpa_s->conf->ap_scan = 0;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
wpas_notify_ap_scan_changed(wpa_s);
|
2009-03-01 22:10:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (wpa_s->conf->ap_scan == 0) {
|
|
|
|
wpa_supplicant_gen_assoc_event(wpa_s);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
if (wpas_p2p_in_progress(wpa_s)) {
|
|
|
|
if (wpa_s->sta_scan_pending &&
|
|
|
|
wpas_p2p_in_progress(wpa_s) == 2 &&
|
|
|
|
wpa_s->global->p2p_cb_on_scan_complete) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Process pending station "
|
|
|
|
"mode scan during P2P search");
|
|
|
|
} else {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Delay station mode scan "
|
|
|
|
"while P2P operation is in progress");
|
|
|
|
wpa_s->sta_scan_pending = 1;
|
|
|
|
wpa_supplicant_req_scan(wpa_s, 5, 0);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
|
|
|
if (wpa_s->conf->ap_scan == 2)
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
max_ssids = 1;
|
|
|
|
else {
|
|
|
|
max_ssids = wpa_s->max_scan_ssids;
|
|
|
|
if (max_ssids > WPAS_MAX_SCAN_SSIDS)
|
|
|
|
max_ssids = WPAS_MAX_SCAN_SSIDS;
|
|
|
|
}
|
|
|
|
|
|
|
|
scan_req = wpa_s->scan_req;
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_s->scan_req = NORMAL_SCAN_REQ;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
|
|
|
os_memset(¶ms, 0, sizeof(params));
|
|
|
|
|
|
|
|
prev_state = wpa_s->wpa_state;
|
2009-03-01 22:10:07 +00:00
|
|
|
if (wpa_s->wpa_state == WPA_DISCONNECTED ||
|
|
|
|
wpa_s->wpa_state == WPA_INACTIVE)
|
|
|
|
wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/*
|
|
|
|
* If autoscan has set its own scanning parameters
|
|
|
|
*/
|
|
|
|
if (wpa_s->autoscan_params != NULL) {
|
|
|
|
scan_params = wpa_s->autoscan_params;
|
|
|
|
goto scan;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (scan_req != MANUAL_SCAN_REQ && wpa_s->connect_without_scan) {
|
|
|
|
for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
|
|
|
|
if (ssid == wpa_s->connect_without_scan)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
wpa_s->connect_without_scan = NULL;
|
|
|
|
if (ssid) {
|
|
|
|
wpa_printf(MSG_DEBUG, "Start a pre-selected network "
|
|
|
|
"without scan step");
|
|
|
|
wpa_supplicant_associate(wpa_s, NULL, ssid);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
if ((wpa_s->p2p_in_provisioning || wpa_s->show_group_started) &&
|
|
|
|
wpa_s->go_params) {
|
|
|
|
wpa_printf(MSG_DEBUG, "P2P: Use specific SSID for scan during "
|
|
|
|
"P2P group formation");
|
|
|
|
params.ssids[0].ssid = wpa_s->go_params->ssid;
|
|
|
|
params.ssids[0].ssid_len = wpa_s->go_params->ssid_len;
|
|
|
|
params.num_ssids = 1;
|
|
|
|
goto ssid_list_set;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
/* Find the starting point from which to continue scanning */
|
2009-03-01 22:10:07 +00:00
|
|
|
ssid = wpa_s->conf->ssid;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
|
2009-03-01 22:10:07 +00:00
|
|
|
while (ssid) {
|
|
|
|
if (ssid == wpa_s->prev_scan_ssid) {
|
|
|
|
ssid = ssid->next;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
ssid = ssid->next;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (scan_req != MANUAL_SCAN_REQ && wpa_s->conf->ap_scan == 2) {
|
|
|
|
wpa_s->connect_without_scan = NULL;
|
|
|
|
wpa_s->prev_scan_wildcard = 0;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
wpa_supplicant_assoc_try(wpa_s, ssid);
|
|
|
|
return;
|
|
|
|
} else if (wpa_s->conf->ap_scan == 2) {
|
2009-03-01 22:10:07 +00:00
|
|
|
/*
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
* User-initiated scan request in ap_scan == 2; scan with
|
|
|
|
* wildcard SSID.
|
2009-03-01 22:10:07 +00:00
|
|
|
*/
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
ssid = NULL;
|
|
|
|
} else {
|
|
|
|
struct wpa_ssid *start = ssid, *tssid;
|
|
|
|
int freqs_set = 0;
|
|
|
|
if (ssid == NULL && max_ssids > 1)
|
|
|
|
ssid = wpa_s->conf->ssid;
|
|
|
|
while (ssid) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (!wpas_network_disabled(wpa_s, ssid) &&
|
|
|
|
ssid->scan_ssid) {
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
wpa_hexdump_ascii(MSG_DEBUG, "Scan SSID",
|
|
|
|
ssid->ssid, ssid->ssid_len);
|
|
|
|
params.ssids[params.num_ssids].ssid =
|
|
|
|
ssid->ssid;
|
|
|
|
params.ssids[params.num_ssids].ssid_len =
|
|
|
|
ssid->ssid_len;
|
|
|
|
params.num_ssids++;
|
|
|
|
if (params.num_ssids + 1 >= max_ssids)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
ssid = ssid->next;
|
|
|
|
if (ssid == start)
|
|
|
|
break;
|
|
|
|
if (ssid == NULL && max_ssids > 1 &&
|
|
|
|
start != wpa_s->conf->ssid)
|
|
|
|
ssid = wpa_s->conf->ssid;
|
2009-03-01 22:10:07 +00:00
|
|
|
}
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
|
|
|
for (tssid = wpa_s->conf->ssid; tssid; tssid = tssid->next) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (wpas_network_disabled(wpa_s, tssid))
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
continue;
|
|
|
|
if ((params.freqs || !freqs_set) && tssid->scan_freq) {
|
|
|
|
int_array_concat(¶ms.freqs,
|
|
|
|
tssid->scan_freq);
|
|
|
|
} else {
|
|
|
|
os_free(params.freqs);
|
|
|
|
params.freqs = NULL;
|
|
|
|
}
|
|
|
|
freqs_set = 1;
|
2009-03-01 22:10:07 +00:00
|
|
|
}
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
int_array_sort_unique(params.freqs);
|
2009-03-01 22:10:07 +00:00
|
|
|
}
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (ssid && max_ssids == 1) {
|
|
|
|
/*
|
|
|
|
* If the driver is limited to 1 SSID at a time interleave
|
|
|
|
* wildcard SSID scans with specific SSID scans to avoid
|
|
|
|
* waiting a long time for a wildcard scan.
|
|
|
|
*/
|
|
|
|
if (!wpa_s->prev_scan_wildcard) {
|
|
|
|
params.ssids[0].ssid = NULL;
|
|
|
|
params.ssids[0].ssid_len = 0;
|
|
|
|
wpa_s->prev_scan_wildcard = 1;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for "
|
|
|
|
"wildcard SSID (Interleave with specific)");
|
|
|
|
} else {
|
|
|
|
wpa_s->prev_scan_ssid = ssid;
|
|
|
|
wpa_s->prev_scan_wildcard = 0;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
|
|
"Starting AP scan for specific SSID: %s",
|
|
|
|
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
}
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
} else if (ssid) {
|
|
|
|
/* max_ssids > 1 */
|
|
|
|
|
|
|
|
wpa_s->prev_scan_ssid = ssid;
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Include wildcard SSID in "
|
|
|
|
"the scan request");
|
|
|
|
params.num_ssids++;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
} else {
|
|
|
|
wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
|
|
|
|
params.num_ssids++;
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for wildcard "
|
|
|
|
"SSID");
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
}
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
ssid_list_set:
|
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
|
|
|
wpa_supplicant_optimize_freqs(wpa_s, ¶ms);
|
|
|
|
extra_ie = wpa_supplicant_extra_ies(wpa_s);
|
|
|
|
|
|
|
|
#ifdef CONFIG_HS20
|
|
|
|
if (wpa_s->conf->hs20 && wpabuf_resize(&extra_ie, 6) == 0)
|
|
|
|
wpas_hs20_add_indication(extra_ie);
|
|
|
|
#endif /* CONFIG_HS20 */
|
|
|
|
|
|
|
|
if (params.freqs == NULL && wpa_s->next_scan_freqs) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Optimize scan based on previously "
|
|
|
|
"generated frequency list");
|
|
|
|
params.freqs = wpa_s->next_scan_freqs;
|
|
|
|
} else
|
|
|
|
os_free(wpa_s->next_scan_freqs);
|
|
|
|
wpa_s->next_scan_freqs = NULL;
|
2009-03-01 22:10:07 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
params.filter_ssids = wpa_supplicant_build_filter_ssids(
|
|
|
|
wpa_s->conf, ¶ms.num_filter_ssids);
|
|
|
|
if (extra_ie) {
|
|
|
|
params.extra_ies = wpabuf_head(extra_ie);
|
|
|
|
params.extra_ies_len = wpabuf_len(extra_ie);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
if (wpa_s->p2p_in_provisioning ||
|
|
|
|
(wpa_s->show_group_started && wpa_s->go_params)) {
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
/*
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
* The interface may not yet be in P2P mode, so we have to
|
|
|
|
* explicitly request P2P probe to disable CCK rates.
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
*/
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
params.p2p_probe = 1;
|
2009-03-01 22:10:07 +00:00
|
|
|
}
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#endif /* CONFIG_P2P */
|
|
|
|
|
|
|
|
scan_params = ¶ms;
|
|
|
|
|
|
|
|
scan:
|
|
|
|
#ifdef CONFIG_P2P
|
|
|
|
/*
|
|
|
|
* If the driver does not support multi-channel concurrency and a
|
|
|
|
* virtual interface that shares the same radio with the wpa_s interface
|
|
|
|
* is operating there may not be need to scan other channels apart from
|
|
|
|
* the current operating channel on the other virtual interface. Filter
|
|
|
|
* out other channels in case we are trying to find a connection for a
|
|
|
|
* station interface when we are not configured to prefer station
|
|
|
|
* connection and a concurrent operation is already in process.
|
|
|
|
*/
|
|
|
|
if (wpa_s->scan_for_connection && scan_req == NORMAL_SCAN_REQ &&
|
|
|
|
!scan_params->freqs && !params.freqs &&
|
|
|
|
wpas_is_p2p_prioritized(wpa_s) &&
|
|
|
|
!(wpa_s->drv_flags & WPA_DRIVER_FLAGS_MULTI_CHANNEL_CONCURRENT) &&
|
|
|
|
wpa_s->p2p_group_interface == NOT_P2P_GROUP_INTERFACE &&
|
|
|
|
non_p2p_network_enabled(wpa_s)) {
|
|
|
|
int freq = shared_vif_oper_freq(wpa_s);
|
|
|
|
if (freq > 0) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only the current "
|
|
|
|
"operating channel (%d MHz) since driver does "
|
|
|
|
"not support multi-channel concurrency", freq);
|
|
|
|
params.freqs = os_zalloc(sizeof(int) * 2);
|
|
|
|
if (params.freqs)
|
|
|
|
params.freqs[0] = freq;
|
|
|
|
scan_params->freqs = params.freqs;
|
2009-03-01 22:10:07 +00:00
|
|
|
}
|
|
|
|
}
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#endif /* CONFIG_P2P */
|
2010-06-13 20:32:04 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
ret = wpa_supplicant_trigger_scan(wpa_s, scan_params);
|
2009-03-01 22:10:07 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpabuf_free(extra_ie);
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
os_free(params.freqs);
|
|
|
|
os_free(params.filter_ssids);
|
2009-03-01 22:10:07 +00:00
|
|
|
|
|
|
|
if (ret) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate AP scan");
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
if (prev_state != wpa_s->wpa_state)
|
|
|
|
wpa_supplicant_set_state(wpa_s, prev_state);
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/* Restore scan_req since we will try to scan again */
|
|
|
|
wpa_s->scan_req = scan_req;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
wpa_supplicant_req_scan(wpa_s, 1, 0);
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
} else {
|
|
|
|
wpa_s->scan_for_connection = 0;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
}
|
2009-03-01 22:10:07 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* wpa_supplicant_req_scan - Schedule a scan for neighboring access points
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* @sec: Number of seconds after which to scan
|
|
|
|
* @usec: Number of microseconds after which to scan
|
|
|
|
*
|
|
|
|
* This function is used to schedule a scan for neighboring access points after
|
|
|
|
* the specified time.
|
|
|
|
*/
|
|
|
|
void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec)
|
|
|
|
{
|
|
|
|
/* If there's at least one network that should be specifically scanned
|
|
|
|
* then don't cancel the scan and reschedule. Some drivers do
|
|
|
|
* background scanning which generates frequent scan results, and that
|
|
|
|
* causes the specific SSID scan to get continually pushed back and
|
|
|
|
* never happen, which causes hidden APs to never get probe-scanned.
|
|
|
|
*/
|
|
|
|
if (eloop_is_timeout_registered(wpa_supplicant_scan, wpa_s, NULL) &&
|
|
|
|
wpa_s->conf->ap_scan == 1) {
|
|
|
|
struct wpa_ssid *ssid = wpa_s->conf->ssid;
|
|
|
|
|
|
|
|
while (ssid) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (!wpas_network_disabled(wpa_s, ssid) &&
|
|
|
|
ssid->scan_ssid)
|
2009-03-01 22:10:07 +00:00
|
|
|
break;
|
|
|
|
ssid = ssid->next;
|
|
|
|
}
|
|
|
|
if (ssid) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Not rescheduling scan to "
|
2009-03-01 22:10:07 +00:00
|
|
|
"ensure that specific SSID scans occur");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Setting scan request: %d sec %d usec",
|
2009-03-01 22:10:07 +00:00
|
|
|
sec, usec);
|
|
|
|
eloop_cancel_timeout(wpa_supplicant_scan, wpa_s, NULL);
|
|
|
|
eloop_register_timeout(sec, usec, wpa_supplicant_scan, wpa_s, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_supplicant_delayed_sched_scan - Request a delayed scheduled scan
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* @sec: Number of seconds after which to scan
|
|
|
|
* @usec: Number of microseconds after which to scan
|
|
|
|
* Returns: 0 on success or -1 otherwise
|
|
|
|
*
|
|
|
|
* This function is used to schedule periodic scans for neighboring
|
|
|
|
* access points after the specified time.
|
|
|
|
*/
|
|
|
|
int wpa_supplicant_delayed_sched_scan(struct wpa_supplicant *wpa_s,
|
|
|
|
int sec, int usec)
|
|
|
|
{
|
|
|
|
if (!wpa_s->sched_scan_supported)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
eloop_register_timeout(sec, usec,
|
|
|
|
wpa_supplicant_delayed_sched_scan_timeout,
|
|
|
|
wpa_s, NULL);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* wpa_supplicant_req_sched_scan - Start a periodic scheduled scan
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* Returns: 0 is sched_scan was started or -1 otherwise
|
|
|
|
*
|
|
|
|
* This function is used to schedule periodic scans for neighboring
|
|
|
|
* access points repeating the scan continuously.
|
|
|
|
*/
|
|
|
|
int wpa_supplicant_req_sched_scan(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
struct wpa_driver_scan_params params;
|
|
|
|
struct wpa_driver_scan_params *scan_params;
|
|
|
|
enum wpa_states prev_state;
|
|
|
|
struct wpa_ssid *ssid = NULL;
|
|
|
|
struct wpabuf *extra_ie = NULL;
|
|
|
|
int ret;
|
|
|
|
unsigned int max_sched_scan_ssids;
|
|
|
|
int wildcard = 0;
|
|
|
|
int need_ssids;
|
|
|
|
|
|
|
|
if (!wpa_s->sched_scan_supported)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
if (wpa_s->max_sched_scan_ssids > WPAS_MAX_SCAN_SSIDS)
|
|
|
|
max_sched_scan_ssids = WPAS_MAX_SCAN_SSIDS;
|
|
|
|
else
|
|
|
|
max_sched_scan_ssids = wpa_s->max_sched_scan_ssids;
|
|
|
|
if (max_sched_scan_ssids < 1 || wpa_s->conf->disable_scan_offload)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
if (wpa_s->sched_scanning) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Already sched scanning");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
need_ssids = 0;
|
|
|
|
for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
|
|
|
|
if (!wpas_network_disabled(wpa_s, ssid) && !ssid->scan_ssid) {
|
|
|
|
/* Use wildcard SSID to find this network */
|
|
|
|
wildcard = 1;
|
|
|
|
} else if (!wpas_network_disabled(wpa_s, ssid) &&
|
|
|
|
ssid->ssid_len)
|
|
|
|
need_ssids++;
|
|
|
|
|
|
|
|
#ifdef CONFIG_WPS
|
|
|
|
if (!wpas_network_disabled(wpa_s, ssid) &&
|
|
|
|
ssid->key_mgmt == WPA_KEY_MGMT_WPS) {
|
|
|
|
/*
|
|
|
|
* Normal scan is more reliable and faster for WPS
|
|
|
|
* operations and since these are for short periods of
|
|
|
|
* time, the benefit of trying to use sched_scan would
|
|
|
|
* be limited.
|
|
|
|
*/
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of "
|
|
|
|
"sched_scan for WPS");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_WPS */
|
|
|
|
}
|
|
|
|
if (wildcard)
|
|
|
|
need_ssids++;
|
|
|
|
|
|
|
|
if (wpa_s->normal_scans < 3 &&
|
|
|
|
(need_ssids <= wpa_s->max_scan_ssids ||
|
|
|
|
wpa_s->max_scan_ssids >= (int) max_sched_scan_ssids)) {
|
|
|
|
/*
|
|
|
|
* When normal scan can speed up operations, use that for the
|
|
|
|
* first operations before starting the sched_scan to allow
|
|
|
|
* user space sleep more. We do this only if the normal scan
|
|
|
|
* has functionality that is suitable for this or if the
|
|
|
|
* sched_scan does not have better support for multiple SSIDs.
|
|
|
|
*/
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of "
|
|
|
|
"sched_scan for initial scans (normal_scans=%d)",
|
|
|
|
wpa_s->normal_scans);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
os_memset(¶ms, 0, sizeof(params));
|
|
|
|
|
|
|
|
/* If we can't allocate space for the filters, we just don't filter */
|
|
|
|
params.filter_ssids = os_zalloc(wpa_s->max_match_sets *
|
|
|
|
sizeof(struct wpa_driver_scan_filter));
|
|
|
|
|
|
|
|
prev_state = wpa_s->wpa_state;
|
|
|
|
if (wpa_s->wpa_state == WPA_DISCONNECTED ||
|
|
|
|
wpa_s->wpa_state == WPA_INACTIVE)
|
|
|
|
wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
|
|
|
|
|
|
|
|
if (wpa_s->autoscan_params != NULL) {
|
|
|
|
scan_params = wpa_s->autoscan_params;
|
|
|
|
goto scan;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Find the starting point from which to continue scanning */
|
|
|
|
ssid = wpa_s->conf->ssid;
|
|
|
|
if (wpa_s->prev_sched_ssid) {
|
|
|
|
while (ssid) {
|
|
|
|
if (ssid == wpa_s->prev_sched_ssid) {
|
|
|
|
ssid = ssid->next;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
ssid = ssid->next;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!ssid || !wpa_s->prev_sched_ssid) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Beginning of SSID list");
|
|
|
|
|
|
|
|
if (wpa_s->sched_scan_interval == 0)
|
|
|
|
wpa_s->sched_scan_interval = 10;
|
|
|
|
wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2;
|
|
|
|
wpa_s->first_sched_scan = 1;
|
|
|
|
ssid = wpa_s->conf->ssid;
|
|
|
|
wpa_s->prev_sched_ssid = ssid;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wildcard) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Add wildcard SSID to sched_scan");
|
|
|
|
params.num_ssids++;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (ssid) {
|
|
|
|
if (wpas_network_disabled(wpa_s, ssid))
|
|
|
|
goto next;
|
|
|
|
|
|
|
|
if (params.num_filter_ssids < wpa_s->max_match_sets &&
|
|
|
|
params.filter_ssids && ssid->ssid && ssid->ssid_len) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "add to filter ssid: %s",
|
|
|
|
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
|
|
|
|
os_memcpy(params.filter_ssids[params.num_filter_ssids].ssid,
|
|
|
|
ssid->ssid, ssid->ssid_len);
|
|
|
|
params.filter_ssids[params.num_filter_ssids].ssid_len =
|
|
|
|
ssid->ssid_len;
|
|
|
|
params.num_filter_ssids++;
|
|
|
|
} else if (params.filter_ssids && ssid->ssid && ssid->ssid_len)
|
|
|
|
{
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Not enough room for SSID "
|
|
|
|
"filter for sched_scan - drop filter");
|
|
|
|
os_free(params.filter_ssids);
|
|
|
|
params.filter_ssids = NULL;
|
|
|
|
params.num_filter_ssids = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ssid->scan_ssid && ssid->ssid && ssid->ssid_len) {
|
|
|
|
if (params.num_ssids == max_sched_scan_ssids)
|
|
|
|
break; /* only room for broadcast SSID */
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
|
|
"add to active scan ssid: %s",
|
|
|
|
wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
|
|
|
|
params.ssids[params.num_ssids].ssid =
|
|
|
|
ssid->ssid;
|
|
|
|
params.ssids[params.num_ssids].ssid_len =
|
|
|
|
ssid->ssid_len;
|
|
|
|
params.num_ssids++;
|
|
|
|
if (params.num_ssids >= max_sched_scan_ssids) {
|
|
|
|
wpa_s->prev_sched_ssid = ssid;
|
|
|
|
do {
|
|
|
|
ssid = ssid->next;
|
|
|
|
} while (ssid &&
|
|
|
|
(wpas_network_disabled(wpa_s, ssid) ||
|
|
|
|
!ssid->scan_ssid));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
next:
|
|
|
|
wpa_s->prev_sched_ssid = ssid;
|
|
|
|
ssid = ssid->next;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (params.num_filter_ssids == 0) {
|
|
|
|
os_free(params.filter_ssids);
|
|
|
|
params.filter_ssids = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
extra_ie = wpa_supplicant_extra_ies(wpa_s);
|
|
|
|
if (extra_ie) {
|
|
|
|
params.extra_ies = wpabuf_head(extra_ie);
|
|
|
|
params.extra_ies_len = wpabuf_len(extra_ie);
|
|
|
|
}
|
|
|
|
|
|
|
|
scan_params = ¶ms;
|
|
|
|
|
|
|
|
scan:
|
|
|
|
if (ssid || !wpa_s->first_sched_scan) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
|
|
"Starting sched scan: interval %d timeout %d",
|
|
|
|
wpa_s->sched_scan_interval, wpa_s->sched_scan_timeout);
|
|
|
|
} else {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG,
|
|
|
|
"Starting sched scan: interval %d (no timeout)",
|
|
|
|
wpa_s->sched_scan_interval);
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = wpa_supplicant_start_sched_scan(wpa_s, scan_params,
|
|
|
|
wpa_s->sched_scan_interval);
|
|
|
|
wpabuf_free(extra_ie);
|
|
|
|
os_free(params.filter_ssids);
|
|
|
|
if (ret) {
|
|
|
|
wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate sched scan");
|
|
|
|
if (prev_state != wpa_s->wpa_state)
|
|
|
|
wpa_supplicant_set_state(wpa_s, prev_state);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If we have more SSIDs to scan, add a timeout so we scan them too */
|
|
|
|
if (ssid || !wpa_s->first_sched_scan) {
|
|
|
|
wpa_s->sched_scan_timed_out = 0;
|
|
|
|
eloop_register_timeout(wpa_s->sched_scan_timeout, 0,
|
|
|
|
wpa_supplicant_sched_scan_timeout,
|
|
|
|
wpa_s, NULL);
|
|
|
|
wpa_s->first_sched_scan = 0;
|
|
|
|
wpa_s->sched_scan_timeout /= 2;
|
|
|
|
wpa_s->sched_scan_interval *= 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2009-03-01 22:10:07 +00:00
|
|
|
/**
|
|
|
|
* wpa_supplicant_cancel_scan - Cancel a scheduled scan request
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
*
|
|
|
|
* This function is used to cancel a scan request scheduled with
|
|
|
|
* wpa_supplicant_req_scan().
|
|
|
|
*/
|
|
|
|
void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling scan request");
|
2009-03-01 22:10:07 +00:00
|
|
|
eloop_cancel_timeout(wpa_supplicant_scan, wpa_s, NULL);
|
|
|
|
}
|
2010-06-13 20:32:04 +00:00
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_supplicant_cancel_sched_scan - Stop running scheduled scans
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
*
|
|
|
|
* This function is used to stop a periodic scheduled scan.
|
|
|
|
*/
|
|
|
|
void wpa_supplicant_cancel_sched_scan(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
if (!wpa_s->sched_scanning)
|
|
|
|
return;
|
|
|
|
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling sched scan");
|
|
|
|
eloop_cancel_timeout(wpa_supplicant_sched_scan_timeout, wpa_s, NULL);
|
|
|
|
wpa_supplicant_stop_sched_scan(wpa_s);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* wpa_supplicant_notify_scanning - Indicate possible scan state change
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* @scanning: Whether scanning is currently in progress
|
|
|
|
*
|
|
|
|
* This function is to generate scanning notifycations. It is called whenever
|
|
|
|
* there may have been a change in scanning (scan started, completed, stopped).
|
|
|
|
* wpas_notify_scanning() is called whenever the scanning state changed from the
|
|
|
|
* previously notified state.
|
|
|
|
*/
|
2010-06-13 20:32:04 +00:00
|
|
|
void wpa_supplicant_notify_scanning(struct wpa_supplicant *wpa_s,
|
|
|
|
int scanning)
|
|
|
|
{
|
|
|
|
if (wpa_s->scanning != scanning) {
|
|
|
|
wpa_s->scanning = scanning;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
wpas_notify_scanning(wpa_s);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int wpa_scan_get_max_rate(const struct wpa_scan_res *res)
|
|
|
|
{
|
|
|
|
int rate = 0;
|
|
|
|
const u8 *ie;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
ie = wpa_scan_get_ie(res, WLAN_EID_SUPP_RATES);
|
|
|
|
for (i = 0; ie && i < ie[1]; i++) {
|
|
|
|
if ((ie[i + 2] & 0x7f) > rate)
|
|
|
|
rate = ie[i + 2] & 0x7f;
|
|
|
|
}
|
|
|
|
|
|
|
|
ie = wpa_scan_get_ie(res, WLAN_EID_EXT_SUPP_RATES);
|
|
|
|
for (i = 0; ie && i < ie[1]; i++) {
|
|
|
|
if ((ie[i + 2] & 0x7f) > rate)
|
|
|
|
rate = ie[i + 2] & 0x7f;
|
|
|
|
}
|
|
|
|
|
|
|
|
return rate;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_scan_get_ie - Fetch a specified information element from a scan result
|
|
|
|
* @res: Scan result entry
|
|
|
|
* @ie: Information element identitifier (WLAN_EID_*)
|
|
|
|
* Returns: Pointer to the information element (id field) or %NULL if not found
|
|
|
|
*
|
|
|
|
* This function returns the first matching information element in the scan
|
|
|
|
* result.
|
|
|
|
*/
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie)
|
|
|
|
{
|
|
|
|
const u8 *end, *pos;
|
|
|
|
|
|
|
|
pos = (const u8 *) (res + 1);
|
|
|
|
end = pos + res->ie_len;
|
|
|
|
|
|
|
|
while (pos + 1 < end) {
|
|
|
|
if (pos + 2 + pos[1] > end)
|
|
|
|
break;
|
|
|
|
if (pos[0] == ie)
|
|
|
|
return pos;
|
|
|
|
pos += 2 + pos[1];
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_scan_get_vendor_ie - Fetch vendor information element from a scan result
|
|
|
|
* @res: Scan result entry
|
|
|
|
* @vendor_type: Vendor type (four octets starting the IE payload)
|
|
|
|
* Returns: Pointer to the information element (id field) or %NULL if not found
|
|
|
|
*
|
|
|
|
* This function returns the first matching information element in the scan
|
|
|
|
* result.
|
|
|
|
*/
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res,
|
|
|
|
u32 vendor_type)
|
|
|
|
{
|
|
|
|
const u8 *end, *pos;
|
|
|
|
|
|
|
|
pos = (const u8 *) (res + 1);
|
|
|
|
end = pos + res->ie_len;
|
|
|
|
|
|
|
|
while (pos + 1 < end) {
|
|
|
|
if (pos + 2 + pos[1] > end)
|
|
|
|
break;
|
|
|
|
if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
|
|
|
|
vendor_type == WPA_GET_BE32(&pos[2]))
|
|
|
|
return pos;
|
|
|
|
pos += 2 + pos[1];
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_scan_get_vendor_ie_multi - Fetch vendor IE data from a scan result
|
|
|
|
* @res: Scan result entry
|
|
|
|
* @vendor_type: Vendor type (four octets starting the IE payload)
|
|
|
|
* Returns: Pointer to the information element payload or %NULL if not found
|
|
|
|
*
|
|
|
|
* This function returns concatenated payload of possibly fragmented vendor
|
|
|
|
* specific information elements in the scan result. The caller is responsible
|
|
|
|
* for freeing the returned buffer.
|
|
|
|
*/
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res,
|
|
|
|
u32 vendor_type)
|
|
|
|
{
|
|
|
|
struct wpabuf *buf;
|
|
|
|
const u8 *end, *pos;
|
|
|
|
|
|
|
|
buf = wpabuf_alloc(res->ie_len);
|
|
|
|
if (buf == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
pos = (const u8 *) (res + 1);
|
|
|
|
end = pos + res->ie_len;
|
|
|
|
|
|
|
|
while (pos + 1 < end) {
|
|
|
|
if (pos + 2 + pos[1] > end)
|
|
|
|
break;
|
|
|
|
if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
|
|
|
|
vendor_type == WPA_GET_BE32(&pos[2]))
|
|
|
|
wpabuf_put_data(buf, pos + 2 + 4, pos[1] - 4);
|
|
|
|
pos += 2 + pos[1];
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wpabuf_len(buf) == 0) {
|
|
|
|
wpabuf_free(buf);
|
|
|
|
buf = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return buf;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/*
|
|
|
|
* Channels with a great SNR can operate at full rate. What is a great SNR?
|
|
|
|
* This doc https://supportforums.cisco.com/docs/DOC-12954 says, "the general
|
|
|
|
* rule of thumb is that any SNR above 20 is good." This one
|
|
|
|
* http://www.cisco.com/en/US/tech/tk722/tk809/technologies_q_and_a_item09186a00805e9a96.shtml#qa23
|
|
|
|
* recommends 25 as a minimum SNR for 54 Mbps data rate. 30 is chosen here as a
|
|
|
|
* conservative value.
|
|
|
|
*/
|
|
|
|
#define GREAT_SNR 30
|
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
/* Compare function for sorting scan results. Return >0 if @b is considered
|
|
|
|
* better. */
|
|
|
|
static int wpa_scan_result_compar(const void *a, const void *b)
|
|
|
|
{
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#define IS_5GHZ(n) (n > 4000)
|
|
|
|
#define MIN(a,b) a < b ? a : b
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
struct wpa_scan_res **_wa = (void *) a;
|
|
|
|
struct wpa_scan_res **_wb = (void *) b;
|
|
|
|
struct wpa_scan_res *wa = *_wa;
|
|
|
|
struct wpa_scan_res *wb = *_wb;
|
|
|
|
int wpa_a, wpa_b, maxrate_a, maxrate_b;
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
int snr_a, snr_b;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
|
|
|
/* WPA/WPA2 support preferred */
|
|
|
|
wpa_a = wpa_scan_get_vendor_ie(wa, WPA_IE_VENDOR_TYPE) != NULL ||
|
|
|
|
wpa_scan_get_ie(wa, WLAN_EID_RSN) != NULL;
|
|
|
|
wpa_b = wpa_scan_get_vendor_ie(wb, WPA_IE_VENDOR_TYPE) != NULL ||
|
|
|
|
wpa_scan_get_ie(wb, WLAN_EID_RSN) != NULL;
|
|
|
|
|
|
|
|
if (wpa_b && !wpa_a)
|
|
|
|
return 1;
|
|
|
|
if (!wpa_b && wpa_a)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
/* privacy support preferred */
|
|
|
|
if ((wa->caps & IEEE80211_CAP_PRIVACY) == 0 &&
|
|
|
|
(wb->caps & IEEE80211_CAP_PRIVACY))
|
|
|
|
return 1;
|
|
|
|
if ((wa->caps & IEEE80211_CAP_PRIVACY) &&
|
|
|
|
(wb->caps & IEEE80211_CAP_PRIVACY) == 0)
|
|
|
|
return -1;
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if ((wa->flags & wb->flags & WPA_SCAN_LEVEL_DBM) &&
|
|
|
|
!((wa->flags | wb->flags) & WPA_SCAN_NOISE_INVALID)) {
|
|
|
|
snr_a = MIN(wa->level - wa->noise, GREAT_SNR);
|
|
|
|
snr_b = MIN(wb->level - wb->noise, GREAT_SNR);
|
|
|
|
} else {
|
|
|
|
/* Not suitable information to calculate SNR, so use level */
|
|
|
|
snr_a = wa->level;
|
|
|
|
snr_b = wb->level;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* best/max rate preferred if SNR close enough */
|
|
|
|
if ((snr_a && snr_b && abs(snr_b - snr_a) < 5) ||
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
(wa->qual && wb->qual && abs(wb->qual - wa->qual) < 10)) {
|
|
|
|
maxrate_a = wpa_scan_get_max_rate(wa);
|
|
|
|
maxrate_b = wpa_scan_get_max_rate(wb);
|
|
|
|
if (maxrate_a != maxrate_b)
|
|
|
|
return maxrate_b - maxrate_a;
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
if (IS_5GHZ(wa->freq) ^ IS_5GHZ(wb->freq))
|
|
|
|
return IS_5GHZ(wa->freq) ? -1 : 1;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* use freq for channel preference */
|
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/* all things being equal, use SNR; if SNRs are
|
|
|
|
* identical, use quality values since some drivers may only report
|
|
|
|
* that value and leave the signal level zero */
|
|
|
|
if (snr_b == snr_a)
|
|
|
|
return wb->qual - wa->qual;
|
|
|
|
return snr_b - snr_a;
|
|
|
|
#undef MIN
|
|
|
|
#undef IS_5GHZ
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_WPS
|
|
|
|
/* Compare function for sorting scan results when searching a WPS AP for
|
|
|
|
* provisioning. Return >0 if @b is considered better. */
|
|
|
|
static int wpa_scan_result_wps_compar(const void *a, const void *b)
|
|
|
|
{
|
|
|
|
struct wpa_scan_res **_wa = (void *) a;
|
|
|
|
struct wpa_scan_res **_wb = (void *) b;
|
|
|
|
struct wpa_scan_res *wa = *_wa;
|
|
|
|
struct wpa_scan_res *wb = *_wb;
|
|
|
|
int uses_wps_a, uses_wps_b;
|
|
|
|
struct wpabuf *wps_a, *wps_b;
|
|
|
|
int res;
|
|
|
|
|
|
|
|
/* Optimization - check WPS IE existence before allocated memory and
|
|
|
|
* doing full reassembly. */
|
|
|
|
uses_wps_a = wpa_scan_get_vendor_ie(wa, WPS_IE_VENDOR_TYPE) != NULL;
|
|
|
|
uses_wps_b = wpa_scan_get_vendor_ie(wb, WPS_IE_VENDOR_TYPE) != NULL;
|
|
|
|
if (uses_wps_a && !uses_wps_b)
|
|
|
|
return -1;
|
|
|
|
if (!uses_wps_a && uses_wps_b)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
if (uses_wps_a && uses_wps_b) {
|
|
|
|
wps_a = wpa_scan_get_vendor_ie_multi(wa, WPS_IE_VENDOR_TYPE);
|
|
|
|
wps_b = wpa_scan_get_vendor_ie_multi(wb, WPS_IE_VENDOR_TYPE);
|
|
|
|
res = wps_ap_priority_compar(wps_a, wps_b);
|
|
|
|
wpabuf_free(wps_a);
|
|
|
|
wpabuf_free(wps_b);
|
|
|
|
if (res)
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Do not use current AP security policy as a sorting criteria during
|
|
|
|
* WPS provisioning step since the AP may get reconfigured at the
|
|
|
|
* completion of provisioning.
|
|
|
|
*/
|
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
/* all things being equal, use signal level; if signal levels are
|
|
|
|
* identical, use quality values since some drivers may only report
|
|
|
|
* that value and leave the signal level zero */
|
|
|
|
if (wb->level == wa->level)
|
|
|
|
return wb->qual - wa->qual;
|
|
|
|
return wb->level - wa->level;
|
|
|
|
}
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
#endif /* CONFIG_WPS */
|
|
|
|
|
|
|
|
|
|
|
|
static void dump_scan_res(struct wpa_scan_results *scan_res)
|
|
|
|
{
|
|
|
|
#ifndef CONFIG_NO_STDOUT_DEBUG
|
|
|
|
size_t i;
|
|
|
|
|
|
|
|
if (scan_res->res == NULL || scan_res->num == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
wpa_printf(MSG_EXCESSIVE, "Sorted scan results");
|
|
|
|
|
|
|
|
for (i = 0; i < scan_res->num; i++) {
|
|
|
|
struct wpa_scan_res *r = scan_res->res[i];
|
|
|
|
u8 *pos;
|
|
|
|
if ((r->flags & (WPA_SCAN_LEVEL_DBM | WPA_SCAN_NOISE_INVALID))
|
|
|
|
== WPA_SCAN_LEVEL_DBM) {
|
|
|
|
int snr = r->level - r->noise;
|
|
|
|
wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
|
|
|
|
"noise=%d level=%d snr=%d%s flags=0x%x",
|
|
|
|
MAC2STR(r->bssid), r->freq, r->qual,
|
|
|
|
r->noise, r->level, snr,
|
|
|
|
snr >= GREAT_SNR ? "*" : "", r->flags);
|
|
|
|
} else {
|
|
|
|
wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
|
|
|
|
"noise=%d level=%d flags=0x%x",
|
|
|
|
MAC2STR(r->bssid), r->freq, r->qual,
|
|
|
|
r->noise, r->level, r->flags);
|
|
|
|
}
|
|
|
|
pos = (u8 *) (r + 1);
|
|
|
|
if (r->ie_len)
|
|
|
|
wpa_hexdump(MSG_EXCESSIVE, "IEs", pos, r->ie_len);
|
|
|
|
pos += r->ie_len;
|
|
|
|
if (r->beacon_ie_len)
|
|
|
|
wpa_hexdump(MSG_EXCESSIVE, "Beacon IEs",
|
|
|
|
pos, r->beacon_ie_len);
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_NO_STDOUT_DEBUG */
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* wpa_supplicant_filter_bssid_match - Is the specified BSSID allowed
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* @bssid: BSSID to check
|
|
|
|
* Returns: 0 if the BSSID is filtered or 1 if not
|
|
|
|
*
|
|
|
|
* This function is used to filter out specific BSSIDs from scan reslts mainly
|
|
|
|
* for testing purposes (SET bssid_filter ctrl_iface command).
|
|
|
|
*/
|
|
|
|
int wpa_supplicant_filter_bssid_match(struct wpa_supplicant *wpa_s,
|
|
|
|
const u8 *bssid)
|
|
|
|
{
|
|
|
|
size_t i;
|
|
|
|
|
|
|
|
if (wpa_s->bssid_filter == NULL)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
for (i = 0; i < wpa_s->bssid_filter_count; i++) {
|
|
|
|
if (os_memcmp(wpa_s->bssid_filter + i * ETH_ALEN, bssid,
|
|
|
|
ETH_ALEN) == 0)
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void filter_scan_res(struct wpa_supplicant *wpa_s,
|
|
|
|
struct wpa_scan_results *res)
|
|
|
|
{
|
|
|
|
size_t i, j;
|
|
|
|
|
|
|
|
if (wpa_s->bssid_filter == NULL)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (i = 0, j = 0; i < res->num; i++) {
|
|
|
|
if (wpa_supplicant_filter_bssid_match(wpa_s,
|
|
|
|
res->res[i]->bssid)) {
|
|
|
|
res->res[j++] = res->res[i];
|
|
|
|
} else {
|
|
|
|
os_free(res->res[i]);
|
|
|
|
res->res[i] = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (res->num != j) {
|
|
|
|
wpa_printf(MSG_DEBUG, "Filtered out %d scan results",
|
|
|
|
(int) (res->num - j));
|
|
|
|
res->num = j;
|
|
|
|
}
|
|
|
|
}
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* wpa_supplicant_get_scan_results - Get scan results
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* @info: Information about what was scanned or %NULL if not available
|
|
|
|
* @new_scan: Whether a new scan was performed
|
|
|
|
* Returns: Scan results, %NULL on failure
|
|
|
|
*
|
|
|
|
* This function request the current scan results from the driver and updates
|
|
|
|
* the local BSS list wpa_s->bss. The caller is responsible for freeing the
|
|
|
|
* results with wpa_scan_results_free().
|
|
|
|
*/
|
|
|
|
struct wpa_scan_results *
|
|
|
|
wpa_supplicant_get_scan_results(struct wpa_supplicant *wpa_s,
|
|
|
|
struct scan_info *info, int new_scan)
|
|
|
|
{
|
|
|
|
struct wpa_scan_results *scan_res;
|
|
|
|
size_t i;
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
int (*compar)(const void *, const void *) = wpa_scan_result_compar;
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
scan_res = wpa_drv_get_scan_results2(wpa_s);
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
if (scan_res == NULL) {
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "Failed to get scan results");
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
return NULL;
|
2010-06-13 20:32:04 +00:00
|
|
|
}
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
filter_scan_res(wpa_s, scan_res);
|
|
|
|
|
|
|
|
#ifdef CONFIG_WPS
|
|
|
|
if (wpas_wps_in_progress(wpa_s)) {
|
|
|
|
wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Order scan results with WPS "
|
|
|
|
"provisioning rules");
|
|
|
|
compar = wpa_scan_result_wps_compar;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_WPS */
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
|
|
|
qsort(scan_res->res, scan_res->num, sizeof(struct wpa_scan_res *),
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
compar);
|
|
|
|
dump_scan_res(scan_res);
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
|
|
|
wpa_bss_update_start(wpa_s);
|
|
|
|
for (i = 0; i < scan_res->num; i++)
|
|
|
|
wpa_bss_update_scan_res(wpa_s, scan_res->res[i]);
|
|
|
|
wpa_bss_update_end(wpa_s, info, new_scan);
|
|
|
|
|
|
|
|
return scan_res;
|
2010-06-13 20:32:04 +00:00
|
|
|
}
|
|
|
|
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
|
Import wpa_supplicant / hostapd 2.0.
2013-01-12 - v2.0
* added AP-STA-DISCONNECTED ctrl_iface event
* improved debug logging (human readable event names, interface name
included in more entries)
* added number of small changes to make it easier for static analyzers
to understand the implementation
* added a workaround for Windows 7 Michael MIC failure reporting and
use of the Secure bit in EAPOL-Key msg 3/4
* fixed number of small bugs (see git logs for more details)
* changed OpenSSL to read full certificate chain from server_cert file
* nl80211: number of updates to use new cfg80211/nl80211 functionality
- replace monitor interface with nl80211 commands
- additional information for driver-based AP SME
* EAP-pwd:
- fix KDF for group 21 and zero-padding
- added support for fragmentation
- increased maximum number of hunting-and-pecking iterations
* avoid excessive Probe Response retries for broadcast Probe Request
frames (only with drivers using hostapd SME/MLME)
* added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y)
* fixed WPS operation stopping on dual concurrent AP
* added wps_rf_bands configuration parameter for overriding RF Bands
value for WPS
* added support for getting per-device PSK from RADIUS Tunnel-Password
* added support for libnl 3.2 and newer
* increased initial group key handshake retransmit timeout to 500 ms
* added a workaround for 4-way handshake to update SNonce even after
having sent EAPOL-Key 3/4 to avoid issues with some supplicant
implementations that can change SNonce for each EAP-Key 2/4
* added a workaround for EAPOL-Key 4/4 using incorrect type value in
WPA2 mode (some deployed stations use WPA type in that message)
* added a WPS workaround for mixed mode AP Settings with Windows 7
* changed WPS AP PIN disabling mechanism to disable the PIN after 10
consecutive failures in addition to using the exponential lockout
period
* added support for WFA Hotspot 2.0
- GAS/ANQP advertisement of network information
- disable_dgaf parameter to disable downstream group-addressed
forwarding
* simplified licensing terms by selecting the BSD license as the only
alternative
* EAP-SIM: fixed re-authentication not to update pseudonym
* EAP-SIM: use Notification round before EAP-Failure
* EAP-AKA: added support for AT_COUNTER_TOO_SMALL
* EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized
* EAP-AKA': fixed identity for MK derivation
* EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this
breaks interoperability with older versions
* EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id
* changed ANonce to be a random number instead of Counter-based
* added support for canceling WPS operations with hostapd_cli wps_cancel
* fixed EAP/WPS to PSK transition on reassociation in cases where
deauthentication is missed
* hlr_auc_gw enhancements:
- a new command line parameter -u can be used to enable updating of
SQN in Milenage file
- use 5 bit IND for SQN updates
- SQLite database can now be used to store Milenage information
* EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms
and reauth data
* added support for Chargeable-User-Identity (RFC 4372)
* added radius_auth_req_attr and radius_acct_req_attr configuration
parameters to allow adding/overriding of RADIUS attributes in
Access-Request and Accounting-Request packets
* added support for RADIUS dynamic authorization server (RFC 5176)
* added initial support for WNM operations
- BSS max idle period
- WNM-Sleep Mode
* added new WPS NFC ctrl_iface mechanism
- removed obsoleted WPS_OOB command (including support for deprecated
UFD config_method)
* added FT support for drivers that implement MLME internally
* added SA Query support for drivers that implement MLME internally
* removed default ACM=1 from AC_VO and AC_VI
* changed VENDOR-TEST EAP method to use proper private enterprise number
(this will not interoperate with older versions)
* added hostapd.conf parameter vendor_elements to allow arbitrary vendor
specific elements to be added to the Beacon and Probe Response frames
* added support for configuring GCMP cipher for IEEE 802.11ad
* added support for 256-bit AES with internal TLS implementation
* changed EAPOL transmission to use AC_VO if WMM is active
* fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length
correctly; invalid messages could have caused the hostapd process to
terminate before this fix [CVE-2012-4445]
* limit number of active wildcard PINs for WPS Registrar to one to avoid
confusing behavior with multiple wildcard PINs
* added a workaround for WPS PBC session overlap detection to avoid
interop issues with deployed station implementations that do not
remove active PBC indication from Probe Request frames properly
* added support for using SQLite for the eap_user database
* added Acct-Session-Id attribute into Access-Request messages
* fixed EAPOL frame transmission to non-QoS STAs with nl80211
(do not send QoS frames if the STA did not negotiate use of QoS for
this association)
2012-05-10 - v1.0
* Add channel selection support in hostapd. See hostapd.conf.
* Add support for IEEE 802.11v Time Advertisement mechanism with UTC
TSF offset. See hostapd.conf for config info.
* Delay STA entry removal until Deauth/Disassoc TX status in AP mode.
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. Only
available with drivers that provide TX status events for Deauth/
Disassoc frames (nl80211).
* Allow PMKSA caching to be disabled on the Authenticator. See
hostap.conf config parameter disable_pmksa_caching.
* atheros: Add support for IEEE 802.11w configuration.
* bsd: Add support for setting HT values in IFM_MMASK.
* Allow client isolation to be configured with ap_isolate. Client
isolation can be used to prevent low-level bridging of frames
between associated stations in the BSS. By default, this bridging
is allowed.
* Allow coexistance of HT BSSes with WEP/TKIP BSSes.
* Add require_ht config parameter, which can be used to configure
hostapd to reject association with any station that does not support
HT PHY.
* Add support for writing debug log to a file using "-f" option. Also
add relog CLI command to re-open the log file.
* Add bridge handling for WDS STA interfaces. By default they are
added to the configured bridge of the AP interface (if present),
but the user can also specify a separate bridge using cli command
wds_bridge.
* hostapd_cli:
- Add wds_bridge command for specifying bridge for WDS STA
interfaces.
- Add relog command for reopening log file.
- Send AP-STA-DISCONNECTED event when an AP disconnects a station
due to inactivity.
- Add wps_config ctrl_interface command for configuring AP. This
command can be used to configure the AP using the internal WPS
registrar. It works in the same way as new AP settings received
from an ER.
- Many WPS/WPS ER commands - see WPS/WPS ER sections for details.
- Add command get version, that returns hostapd version string.
* WNM: Add BSS Transition Management Request for ESS Disassoc Imminent.
Use hostapd_cli ess_disassoc (STA addr) (URL) to send the
notification to the STA.
* Allow AP mode to disconnect STAs based on low ACK condition (when
the data connection is not working properly, e.g., due to the STA
going outside the range of the AP). Disabled by default, enable by
config option disassoc_low_ack.
* Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad
config file.
* WPS:
- Send AP Settings as a wrapped Credential attribute to ctrl_iface
in WPS-NEW-AP-SETTINGS.
- Dispatch more WPS events through hostapd ctrl_iface.
- Add mechanism for indicating non-standard WPS errors.
- Change concurrent radio AP to use only one WPS UPnP instance.
- Add wps_check_pin command for processing PIN from user input.
UIs can use this command to process a PIN entered by a user and to
validate the checksum digit (if present).
- Add hostap_cli get_config command to display current AP config.
- Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at
runtime and support dynamic AP PIN management.
- Disable AP PIN after 10 consecutive failures. Slow down attacks
on failures up to 10.
- Allow AP to start in Enrollee mode without AP PIN for probing,
to be compatible with Windows 7.
- Add Config Error into WPS-FAIL events to provide more info
to the user on how to resolve the issue.
- When controlling multiple interfaces:
- apply WPS commands to all interfaces configured to use WPS
- apply WPS config changes to all interfaces that use WPS
- when an attack is detected on any interface, disable AP PIN on
all interfaces
* WPS ER:
- Show SetSelectedRegistrar events as ctrl_iface events.
- Add special AP Setup Locked mode to allow read only ER.
ap_setup_locked=2 can now be used to enable a special mode where
WPS ER can learn the current AP settings, but cannot change them.
* WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2)
- Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool
for testing protocol extensibility.
- Add build option CONFIG_WPS_STRICT to allow disabling of WPS
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- Allow TDLS use or TDLS channel switching in the BSS to be
prohibited in the BSS, using config params tdls_prohibit and
tdls_prohibit_chan_switch.
* EAP server: Add support for configuring fragment size (see
fragment_size in hostapd.conf).
* wlantest: Add a tool wlantest for IEEE802.11 protocol testing.
wlantest can be used to capture frames from a monitor interface
for realtime capturing or from pcap files for offline analysis.
* Interworking: Support added for 802.11u. Enable in .config with
CONFIG_INTERWORKING. See hostapd.conf for config parameters for
interworking.
* Android: Add build and runtime support for Android hostapd.
* Add a new debug message level for excessive information. Use
-ddd to enable.
* TLS: Add support for tls_disable_time_checks=1 in client mode.
* Internal TLS:
- Add support for TLS v1.1 (RFC 4346). Enable with build parameter
CONFIG_TLSV11.
- Add domainComponent parser for X.509 names
* Reorder some IEs to get closer to IEEE 802.11 standard. Move
WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames.
Move HT IEs to be later in (Re)Assoc Resp.
* Many bugfixes.
2013-06-25 02:47:41 +00:00
|
|
|
/**
|
|
|
|
* wpa_supplicant_update_scan_results - Update scan results from the driver
|
|
|
|
* @wpa_s: Pointer to wpa_supplicant data
|
|
|
|
* Returns: 0 on success, -1 on failure
|
|
|
|
*
|
|
|
|
* This function updates the BSS table within wpa_supplicant based on the
|
|
|
|
* currently available scan results from the driver without requesting a new
|
|
|
|
* scan. This is used in cases where the driver indicates an association
|
|
|
|
* (including roaming within ESS) and wpa_supplicant does not yet have the
|
|
|
|
* needed information to complete the connection (e.g., to perform validation
|
|
|
|
* steps in 4-way handshake).
|
|
|
|
*/
|
Import wpa_supplicant / hostapd 0.7.3.
Changes:
2010-09-07 - v0.7.3
* fixed fallback from failed PMKSA caching into full EAP authentication
[Bug 355]
* fixed issue with early D-Bus signals during initialization
* fixed X.509 name handling in internal TLS
* fixed WPS ER to use corrent Enrollee MAC Address in Credential
* fixed scanning routines ot improve AP selection for WPS
* added WPS workaround for open networks
* fixed WPS Diffie-Hellman derivation to use correct public key length
* fixed wpa_supplicant AP mode operations to ignore Supplicant and
scan result events
* improved SME operations with nl80211
* fixed WPS ER event_id handling in some cases
* fixed some issues with bgscan simple to avoid unnecessary scans
* fixed issue with l2_packet_ndis overlapped writes corrupting stack
[Bug 328]
* updated WinPcap to the latest stable version 4.1.2 in Windows
installer
2010-04-18 - v0.7.2
* nl80211: fixed number of issues with roaming
* avoid unnecessary roaming if multiple APs with similar signal
strength are present in scan results
* add TLS client events and server probing to ease design of
automatic detection of EAP parameters
* add option for server certificate matching (SHA256 hash of the
certificate) instead of trusted CA certificate configuration
* bsd: Cleaned up driver wrapper and added various low-level
configuration options
* wpa_gui-qt4: do not show too frequent WPS AP available events as
tray messages
* TNC: fixed issues with fragmentation
* EAP-TNC: add Flags field into fragment acknowledgement (needed to
interoperate with other implementations; may potentially breaks
compatibility with older wpa_supplicant/hostapd versions)
* wpa_cli: added option for using a separate process to receive event
messages to reduce latency in showing these
(CFLAGS += -DCONFIG_WPA_CLI_FORK=y in .config to enable this)
* maximum BSS table size can now be configured (bss_max_count)
* BSSes to be included in the BSS table can be filtered based on
configured SSIDs to save memory (filter_ssids)
* fix number of issues with IEEE 802.11r/FT; this version is not
backwards compatible with old versions
* nl80211: add support for IEEE 802.11r/FT protocol (both over-the-air
and over-the-DS)
* add freq_list network configuration parameter to allow the AP
selection to filter out entries based on the operating channel
* add signal strength change events for bgscan; this allows more
dynamic changes to background scanning interval based on changes in
the signal strength with the current AP; this improves roaming within
ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
configuration block to request background scans less frequently when
signal strength remains good and to automatically trigger background
scans whenever signal strength drops noticeably
(this is currently only available with nl80211)
* add BSSID and reason code (if available) to disconnect event messages
* wpa_gui-qt4: more complete support for translating the GUI with
linguist and add German translation
* fix DH padding with internal crypto code (mainly, for WPS)
* do not trigger initial scan automatically anymore if there are no
enabled networks
2010-01-16 - v0.7.1
* cleaned up driver wrapper API (struct wpa_driver_ops); the new API
is not fully backwards compatible, so out-of-tree driver wrappers
will need modifications
* cleaned up various module interfaces
* merge hostapd and wpa_supplicant developers' documentation into a
single document
* nl80211: use explicit deauthentication to clear cfg80211 state to
avoid issues when roaming between APs
* dbus: major design changes in the new D-Bus API
(fi.w1.wpa_supplicant1)
* nl80211: added support for IBSS networks
* added internal debugging mechanism with backtrace support and memory
allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y)
* added WPS ER unsubscription command to more cleanly unregister from
receiving UPnP events when ER is terminated
* cleaned up AP mode operations to avoid need for virtual driver_ops
wrapper
* added BSS table to maintain more complete scan result information
over multiple scans (that may include only partial results)
* wpa_gui-qt4: update Peers dialog information more dynamically while
the dialog is kept open
* fixed PKCS#12 use with OpenSSL 1.0.0
* driver_wext: Added cfg80211-specific optimization to avoid some
unnecessary scans and to speed up association
2009-11-21 - v0.7.0
* increased wpa_cli ping interval to 5 seconds and made this
configurable with a new command line options (-G<seconds>)
* fixed scan buffer processing with WEXT to handle up to 65535
byte result buffer (previously, limited to 32768 bytes)
* allow multiple driver wrappers to be specified on command line
(e.g., -Dnl80211,wext); the first one that is able to initialize the
interface will be used
* added support for multiple SSIDs per scan request to optimize
scan_ssid=1 operations in ap_scan=1 mode (i.e., search for hidden
SSIDs); this requires driver support and can currently be used only
with nl80211
* added support for WPS USBA out-of-band mechanism with USB Flash
Drives (UFD) (CONFIG_WPS_UFD=y)
* driver_ndis: add PAE group address to the multicast address list to
fix wired IEEE 802.1X authentication
* fixed IEEE 802.11r key derivation function to match with the standard
(note: this breaks interoperability with previous version) [Bug 303]
* added better support for drivers that allow separate authentication
and association commands (e.g., mac80211-based Linux drivers with
nl80211; SME in wpa_supplicant); this allows over-the-air FT protocol
to be used (IEEE 802.11r)
* fixed SHA-256 based key derivation function to match with the
standard when using CCMP (for IEEE 802.11r and IEEE 802.11w)
(note: this breaks interoperability with previous version) [Bug 307]
* use shared driver wrapper files with hostapd
* added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
block; this can be used for open and WPA2-Personal networks
(optionally, with WPS); this links in parts of hostapd functionality
into wpa_supplicant
* wpa_gui-qt4: added new Peers dialog to show information about peers
(other devices, including APs and stations, etc. in the neighborhood)
* added support for WPS External Registrar functionality (configure APs
and enroll new devices); can be used with wpa_gui-qt4 Peers dialog
and wpa_cli commands wps_er_start, wps_er_stop, wps_er_pin,
wps_er_pbc, wps_er_learn
(this can also be used with a new 'none' driver wrapper if no
wireless device or IEEE 802.1X on wired is needed)
* driver_nl80211: multiple updates to provide support for new Linux
nl80211/mac80211 functionality
* updated management frame protection to use IEEE Std 802.11w-2009
* fixed number of small WPS issues and added workarounds to
interoperate with common deployed broken implementations
* added support for NFC out-of-band mechanism with WPS
* driver_ndis: fixed wired IEEE 802.1X authentication with PAE group
address frames
* added preliminary support for IEEE 802.11r RIC processing
* added support for specifying subset of enabled frequencies to scan
(scan_freq option in the network configuration block); this can speed
up scanning process considerably if it is known that only a small
subset of channels is actually used in the network (this is currently
supported only with -Dnl80211)
* added a workaround for race condition between receiving the
association event and the following EAPOL-Key
* added background scan and roaming infrastructure to allow
network-specific optimizations to be used to improve roaming within
an ESS (same SSID)
* added new DBus interface (fi.w1.wpa_supplicant1)
2010-10-29 08:01:21 +00:00
|
|
|
int wpa_supplicant_update_scan_results(struct wpa_supplicant *wpa_s)
|
|
|
|
{
|
|
|
|
struct wpa_scan_results *scan_res;
|
|
|
|
scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0);
|
|
|
|
if (scan_res == NULL)
|
|
|
|
return -1;
|
|
|
|
wpa_scan_results_free(scan_res);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|