Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2003, 2004 Silicon Graphics International Corp.
|
|
|
|
* Copyright (c) 1997-2007 Kenneth D. Merry
|
2012-03-06 13:43:57 +00:00
|
|
|
* Copyright (c) 2012 The FreeBSD Foundation
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
* All rights reserved.
|
|
|
|
*
|
2012-03-06 13:43:57 +00:00
|
|
|
* Portions of this software were developed by Edward Tomasz Napierala
|
|
|
|
* under sponsorship from the FreeBSD Foundation.
|
|
|
|
*
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
|
|
* without modification.
|
|
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
|
|
* including a substantially similar Disclaimer requirement for further
|
|
|
|
* binary redistribution.
|
|
|
|
*
|
|
|
|
* NO WARRANTY
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
|
|
*
|
|
|
|
* $Id: //depot/users/kenm/FreeBSD-test2/usr.sbin/ctladm/ctladm.c#4 $
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* CAM Target Layer exercise program.
|
|
|
|
*
|
|
|
|
* Author: Ken Merry <ken@FreeBSD.org>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
|
|
#include <sys/ioctl.h>
|
|
|
|
#include <sys/types.h>
|
|
|
|
#include <sys/stat.h>
|
|
|
|
#include <sys/param.h>
|
2013-04-10 08:48:10 +00:00
|
|
|
#include <sys/linker.h>
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
#include <sys/queue.h>
|
|
|
|
#include <sys/callout.h>
|
|
|
|
#include <sys/sbuf.h>
|
|
|
|
#include <stdint.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <unistd.h>
|
|
|
|
#include <fcntl.h>
|
|
|
|
#include <getopt.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <errno.h>
|
|
|
|
#include <err.h>
|
|
|
|
#include <ctype.h>
|
|
|
|
#include <bsdxml.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
|
|
#include <cam/scsi/scsi_message.h>
|
|
|
|
#include <cam/ctl/ctl.h>
|
|
|
|
#include <cam/ctl/ctl_io.h>
|
|
|
|
#include <cam/ctl/ctl_frontend_internal.h>
|
|
|
|
#include <cam/ctl/ctl_backend.h>
|
|
|
|
#include <cam/ctl/ctl_ioctl.h>
|
|
|
|
#include <cam/ctl/ctl_backend_block.h>
|
|
|
|
#include <cam/ctl/ctl_util.h>
|
|
|
|
#include <cam/ctl/ctl_scsi_all.h>
|
|
|
|
#include <camlib.h>
|
2012-03-06 13:43:57 +00:00
|
|
|
#include <libutil.h>
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
#include "ctladm.h"
|
|
|
|
|
|
|
|
#ifdef min
|
|
|
|
#undef min
|
|
|
|
#endif
|
|
|
|
#define min(x,y) (x < y) ? x : y
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
CTLADM_CMD_TUR,
|
|
|
|
CTLADM_CMD_INQUIRY,
|
|
|
|
CTLADM_CMD_REQ_SENSE,
|
|
|
|
CTLADM_CMD_ARRAYLIST,
|
|
|
|
CTLADM_CMD_REPORT_LUNS,
|
|
|
|
CTLADM_CMD_HELP,
|
|
|
|
CTLADM_CMD_DEVLIST,
|
|
|
|
CTLADM_CMD_ADDDEV,
|
|
|
|
CTLADM_CMD_RM,
|
|
|
|
CTLADM_CMD_CREATE,
|
|
|
|
CTLADM_CMD_READ,
|
|
|
|
CTLADM_CMD_WRITE,
|
|
|
|
CTLADM_CMD_PORT,
|
2014-07-05 05:44:26 +00:00
|
|
|
CTLADM_CMD_PORTLIST,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
CTLADM_CMD_READCAPACITY,
|
|
|
|
CTLADM_CMD_MODESENSE,
|
|
|
|
CTLADM_CMD_DUMPOOA,
|
|
|
|
CTLADM_CMD_DUMPSTRUCTS,
|
|
|
|
CTLADM_CMD_START,
|
|
|
|
CTLADM_CMD_STOP,
|
|
|
|
CTLADM_CMD_SYNC_CACHE,
|
|
|
|
CTLADM_CMD_SHUTDOWN,
|
|
|
|
CTLADM_CMD_STARTUP,
|
|
|
|
CTLADM_CMD_LUNLIST,
|
|
|
|
CTLADM_CMD_HARDSTOP,
|
|
|
|
CTLADM_CMD_HARDSTART,
|
|
|
|
CTLADM_CMD_DELAY,
|
|
|
|
CTLADM_CMD_REALSYNC,
|
|
|
|
CTLADM_CMD_SETSYNC,
|
|
|
|
CTLADM_CMD_GETSYNC,
|
|
|
|
CTLADM_CMD_ERR_INJECT,
|
|
|
|
CTLADM_CMD_BBRREAD,
|
|
|
|
CTLADM_CMD_PRES_IN,
|
|
|
|
CTLADM_CMD_PRES_OUT,
|
|
|
|
CTLADM_CMD_INQ_VPD_DEVID,
|
2012-03-06 13:43:57 +00:00
|
|
|
CTLADM_CMD_RTPG,
|
2013-09-14 15:29:06 +00:00
|
|
|
CTLADM_CMD_MODIFY,
|
|
|
|
CTLADM_CMD_ISLIST,
|
|
|
|
CTLADM_CMD_ISLOGOUT,
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
CTLADM_CMD_ISTERMINATE,
|
|
|
|
CTLADM_CMD_LUNMAP
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
} ctladm_cmdfunction;
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
CTLADM_ARG_NONE = 0x0000000,
|
|
|
|
CTLADM_ARG_AUTOSENSE = 0x0000001,
|
|
|
|
CTLADM_ARG_DEVICE = 0x0000002,
|
|
|
|
CTLADM_ARG_ARRAYSIZE = 0x0000004,
|
|
|
|
CTLADM_ARG_BACKEND = 0x0000008,
|
|
|
|
CTLADM_ARG_CDBSIZE = 0x0000010,
|
|
|
|
CTLADM_ARG_DATALEN = 0x0000020,
|
|
|
|
CTLADM_ARG_FILENAME = 0x0000040,
|
|
|
|
CTLADM_ARG_LBA = 0x0000080,
|
|
|
|
CTLADM_ARG_PC = 0x0000100,
|
|
|
|
CTLADM_ARG_PAGE_CODE = 0x0000200,
|
|
|
|
CTLADM_ARG_PAGE_LIST = 0x0000400,
|
|
|
|
CTLADM_ARG_SUBPAGE = 0x0000800,
|
|
|
|
CTLADM_ARG_PAGELIST = 0x0001000,
|
|
|
|
CTLADM_ARG_DBD = 0x0002000,
|
|
|
|
CTLADM_ARG_TARG_LUN = 0x0004000,
|
|
|
|
CTLADM_ARG_BLOCKSIZE = 0x0008000,
|
|
|
|
CTLADM_ARG_IMMED = 0x0010000,
|
|
|
|
CTLADM_ARG_RELADR = 0x0020000,
|
|
|
|
CTLADM_ARG_RETRIES = 0x0040000,
|
|
|
|
CTLADM_ARG_ONOFFLINE = 0x0080000,
|
|
|
|
CTLADM_ARG_ONESHOT = 0x0100000,
|
|
|
|
CTLADM_ARG_TIMEOUT = 0x0200000,
|
2014-10-22 09:17:17 +00:00
|
|
|
CTLADM_ARG_INITIATOR = 0x0400000,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
CTLADM_ARG_NOCOPY = 0x0800000,
|
|
|
|
CTLADM_ARG_NEED_TL = 0x1000000
|
|
|
|
} ctladm_cmdargs;
|
|
|
|
|
|
|
|
struct ctladm_opts {
|
|
|
|
const char *optname;
|
|
|
|
uint32_t cmdnum;
|
|
|
|
ctladm_cmdargs argnum;
|
|
|
|
const char *subopt;
|
|
|
|
};
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
CC_OR_NOT_FOUND,
|
|
|
|
CC_OR_AMBIGUOUS,
|
|
|
|
CC_OR_FOUND
|
|
|
|
} ctladm_optret;
|
|
|
|
|
|
|
|
static const char rw_opts[] = "Nb:c:d:f:l:";
|
|
|
|
static const char startstop_opts[] = "io";
|
|
|
|
|
2012-10-19 14:49:42 +00:00
|
|
|
static struct ctladm_opts option_table[] = {
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"adddev", CTLADM_CMD_ADDDEV, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"bbrread", CTLADM_CMD_BBRREAD, CTLADM_ARG_NEED_TL, "d:l:"},
|
|
|
|
{"create", CTLADM_CMD_CREATE, CTLADM_ARG_NONE, "b:B:d:l:o:s:S:t:"},
|
|
|
|
{"delay", CTLADM_CMD_DELAY, CTLADM_ARG_NEED_TL, "T:l:t:"},
|
|
|
|
{"devid", CTLADM_CMD_INQ_VPD_DEVID, CTLADM_ARG_NEED_TL, NULL},
|
|
|
|
{"devlist", CTLADM_CMD_DEVLIST, CTLADM_ARG_NONE, "b:vx"},
|
|
|
|
{"dumpooa", CTLADM_CMD_DUMPOOA, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"dumpstructs", CTLADM_CMD_DUMPSTRUCTS, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"getsync", CTLADM_CMD_GETSYNC, CTLADM_ARG_NEED_TL, NULL},
|
|
|
|
{"hardstart", CTLADM_CMD_HARDSTART, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"hardstop", CTLADM_CMD_HARDSTOP, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"help", CTLADM_CMD_HELP, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"inject", CTLADM_CMD_ERR_INJECT, CTLADM_ARG_NEED_TL, "cd:i:p:r:s:"},
|
|
|
|
{"inquiry", CTLADM_CMD_INQUIRY, CTLADM_ARG_NEED_TL, NULL},
|
2013-09-14 15:29:06 +00:00
|
|
|
{"islist", CTLADM_CMD_ISLIST, CTLADM_ARG_NONE, "vx"},
|
2013-10-30 11:38:46 +00:00
|
|
|
{"islogout", CTLADM_CMD_ISLOGOUT, CTLADM_ARG_NONE, "ac:i:p:"},
|
|
|
|
{"isterminate", CTLADM_CMD_ISTERMINATE, CTLADM_ARG_NONE, "ac:i:p:"},
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"lunlist", CTLADM_CMD_LUNLIST, CTLADM_ARG_NONE, NULL},
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
{"lunmap", CTLADM_CMD_LUNMAP, CTLADM_ARG_NONE, "p:l:L:"},
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"modesense", CTLADM_CMD_MODESENSE, CTLADM_ARG_NEED_TL, "P:S:dlm:c:"},
|
2012-03-06 13:43:57 +00:00
|
|
|
{"modify", CTLADM_CMD_MODIFY, CTLADM_ARG_NONE, "b:l:s:"},
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"port", CTLADM_CMD_PORT, CTLADM_ARG_NONE, "lo:p:qt:w:W:x"},
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
{"portlist", CTLADM_CMD_PORTLIST, CTLADM_ARG_NONE, "f:ilp:qvx"},
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"prin", CTLADM_CMD_PRES_IN, CTLADM_ARG_NEED_TL, "a:"},
|
|
|
|
{"prout", CTLADM_CMD_PRES_OUT, CTLADM_ARG_NEED_TL, "a:k:r:s:"},
|
|
|
|
{"read", CTLADM_CMD_READ, CTLADM_ARG_NEED_TL, rw_opts},
|
|
|
|
{"readcapacity", CTLADM_CMD_READCAPACITY, CTLADM_ARG_NEED_TL, "c:"},
|
|
|
|
{"realsync", CTLADM_CMD_REALSYNC, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"remove", CTLADM_CMD_RM, CTLADM_ARG_NONE, "b:l:o:"},
|
|
|
|
{"reportluns", CTLADM_CMD_REPORT_LUNS, CTLADM_ARG_NEED_TL, NULL},
|
|
|
|
{"reqsense", CTLADM_CMD_REQ_SENSE, CTLADM_ARG_NEED_TL, NULL},
|
|
|
|
{"rtpg", CTLADM_CMD_RTPG, CTLADM_ARG_NEED_TL, NULL},
|
|
|
|
{"setsync", CTLADM_CMD_SETSYNC, CTLADM_ARG_NEED_TL, "i:"},
|
|
|
|
{"shutdown", CTLADM_CMD_SHUTDOWN, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"start", CTLADM_CMD_START, CTLADM_ARG_NEED_TL, startstop_opts},
|
|
|
|
{"startup", CTLADM_CMD_STARTUP, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"stop", CTLADM_CMD_STOP, CTLADM_ARG_NEED_TL, startstop_opts},
|
|
|
|
{"synccache", CTLADM_CMD_SYNC_CACHE, CTLADM_ARG_NEED_TL, "b:c:il:r"},
|
|
|
|
{"tur", CTLADM_CMD_TUR, CTLADM_ARG_NEED_TL, NULL},
|
|
|
|
{"write", CTLADM_CMD_WRITE, CTLADM_ARG_NEED_TL, rw_opts},
|
|
|
|
{"-?", CTLADM_CMD_HELP, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"-h", CTLADM_CMD_HELP, CTLADM_ARG_NONE, NULL},
|
|
|
|
{NULL, 0, 0, NULL}
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
ctladm_optret getoption(struct ctladm_opts *table, char *arg, uint32_t *cmdnum,
|
|
|
|
ctladm_cmdargs *argnum, const char **subopt);
|
|
|
|
static int cctl_parse_tl(char *str, int *target, int *lun);
|
|
|
|
static int cctl_dump_ooa(int fd, int argc, char **argv);
|
|
|
|
static int cctl_port_dump(int fd, int quiet, int xml, int32_t fe_num,
|
|
|
|
ctl_port_type port_type);
|
|
|
|
static int cctl_port(int fd, int argc, char **argv, char *combinedopt);
|
|
|
|
static int cctl_do_io(int fd, int retries, union ctl_io *io, const char *func);
|
|
|
|
static int cctl_delay(int fd, int target, int lun, int argc, char **argv,
|
|
|
|
char *combinedopt);
|
|
|
|
static int cctl_lunlist(int fd);
|
|
|
|
static void cctl_cfi_mt_statusstr(cfi_mt_status status, char *str, int str_len);
|
|
|
|
static void cctl_cfi_bbr_statusstr(cfi_bbrread_status, char *str, int str_len);
|
|
|
|
static int cctl_hardstopstart(int fd, ctladm_cmdfunction command);
|
|
|
|
static int cctl_bbrread(int fd, int target, int lun, int iid, int argc,
|
|
|
|
char **argv, char *combinedopt);
|
|
|
|
static int cctl_startup_shutdown(int fd, int target, int lun, int iid,
|
|
|
|
ctladm_cmdfunction command);
|
|
|
|
static int cctl_sync_cache(int fd, int target, int lun, int iid, int retries,
|
|
|
|
int argc, char **argv, char *combinedopt);
|
|
|
|
static int cctl_start_stop(int fd, int target, int lun, int iid, int retries,
|
|
|
|
int start, int argc, char **argv, char *combinedopt);
|
2014-10-22 09:17:17 +00:00
|
|
|
static int cctl_mode_sense(int fd, int target, int lun, int iid, int retries,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
int argc, char **argv, char *combinedopt);
|
|
|
|
static int cctl_read_capacity(int fd, int target, int lun, int iid,
|
|
|
|
int retries, int argc, char **argv,
|
|
|
|
char *combinedopt);
|
|
|
|
static int cctl_read_write(int fd, int target, int lun, int iid, int retries,
|
|
|
|
int argc, char **argv, char *combinedopt,
|
|
|
|
ctladm_cmdfunction command);
|
|
|
|
static int cctl_get_luns(int fd, int target, int lun, int iid, int retries,
|
|
|
|
struct scsi_report_luns_data **lun_data,
|
|
|
|
uint32_t *num_luns);
|
|
|
|
static int cctl_report_luns(int fd, int target, int lun, int iid, int retries);
|
|
|
|
static int cctl_tur(int fd, int target, int lun, int iid, int retries);
|
|
|
|
static int cctl_get_inquiry(int fd, int target, int lun, int iid, int retries,
|
|
|
|
char *path_str, int path_len,
|
|
|
|
struct scsi_inquiry_data *inq_data);
|
|
|
|
static int cctl_inquiry(int fd, int target, int lun, int iid, int retries);
|
|
|
|
static int cctl_req_sense(int fd, int target, int lun, int iid, int retries);
|
|
|
|
static int cctl_persistent_reserve_in(int fd, int target, int lun,
|
|
|
|
int initiator, int argc, char **argv,
|
|
|
|
char *combinedopt, int retry_count);
|
2014-10-22 09:17:17 +00:00
|
|
|
static int cctl_persistent_reserve_out(int fd, int target, int lun,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
int initiator, int argc, char **argv,
|
|
|
|
char *combinedopt, int retry_count);
|
|
|
|
static int cctl_create_lun(int fd, int argc, char **argv, char *combinedopt);
|
|
|
|
static int cctl_inquiry_vpd_devid(int fd, int target, int lun, int initiator);
|
|
|
|
static int cctl_report_target_port_group(int fd, int target, int lun,
|
|
|
|
int initiator);
|
2012-03-06 13:43:57 +00:00
|
|
|
static int cctl_modify_lun(int fd, int argc, char **argv, char *combinedopt);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
|
|
|
|
ctladm_optret
|
|
|
|
getoption(struct ctladm_opts *table, char *arg, uint32_t *cmdnum,
|
|
|
|
ctladm_cmdargs *argnum, const char **subopt)
|
|
|
|
{
|
|
|
|
struct ctladm_opts *opts;
|
|
|
|
int num_matches = 0;
|
|
|
|
|
|
|
|
for (opts = table; (opts != NULL) && (opts->optname != NULL);
|
|
|
|
opts++) {
|
|
|
|
if (strncmp(opts->optname, arg, strlen(arg)) == 0) {
|
|
|
|
*cmdnum = opts->cmdnum;
|
|
|
|
*argnum = opts->argnum;
|
|
|
|
*subopt = opts->subopt;
|
|
|
|
|
|
|
|
if (strcmp(opts->optname, arg) == 0)
|
|
|
|
return (CC_OR_FOUND);
|
|
|
|
|
|
|
|
if (++num_matches > 1)
|
|
|
|
return(CC_OR_AMBIGUOUS);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (num_matches > 0)
|
|
|
|
return(CC_OR_FOUND);
|
|
|
|
else
|
|
|
|
return(CC_OR_NOT_FOUND);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_parse_tl(char *str, int *target, int *lun)
|
|
|
|
{
|
|
|
|
char *tmpstr;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
while (isspace(*str) && (*str != '\0'))
|
|
|
|
str++;
|
|
|
|
|
|
|
|
tmpstr = (char *)strtok(str, ":");
|
|
|
|
if ((tmpstr != NULL) && (*tmpstr != '\0')) {
|
|
|
|
*target = strtol(tmpstr, NULL, 0);
|
|
|
|
tmpstr = (char *)strtok(NULL, ":");
|
|
|
|
if ((tmpstr != NULL) && (*tmpstr != '\0')) {
|
|
|
|
*lun = strtol(tmpstr, NULL, 0);
|
|
|
|
} else
|
|
|
|
retval = -1;
|
|
|
|
} else
|
|
|
|
retval = -1;
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_dump_ooa(int fd, int argc, char **argv)
|
|
|
|
{
|
|
|
|
struct ctl_ooa ooa;
|
|
|
|
long double cmd_latency;
|
|
|
|
int num_entries, len;
|
|
|
|
int target = -1, lun = -1;
|
|
|
|
int retval;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
num_entries = 104;
|
|
|
|
|
|
|
|
if ((argc > 2)
|
|
|
|
&& (isdigit(argv[2][0]))) {
|
|
|
|
retval = cctl_parse_tl(argv[2], &target, &lun);
|
|
|
|
if (retval != 0)
|
|
|
|
warnx("invalid target:lun argument %s", argv[2]);
|
|
|
|
}
|
|
|
|
retry:
|
|
|
|
|
|
|
|
len = num_entries * sizeof(struct ctl_ooa_entry);
|
|
|
|
|
|
|
|
bzero(&ooa, sizeof(ooa));
|
|
|
|
|
|
|
|
ooa.entries = malloc(len);
|
|
|
|
|
|
|
|
if (ooa.entries == NULL) {
|
|
|
|
warn("%s: error mallocing %d bytes", __func__, len);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (argc > 2) {
|
|
|
|
ooa.lun_num = lun;
|
|
|
|
} else
|
|
|
|
ooa.flags |= CTL_OOA_FLAG_ALL_LUNS;
|
|
|
|
|
|
|
|
ooa.alloc_len = len;
|
|
|
|
ooa.alloc_num = num_entries;
|
|
|
|
if (ioctl(fd, CTL_GET_OOA, &ooa) == -1) {
|
|
|
|
warn("%s: CTL_GET_OOA ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ooa.status == CTL_OOA_NEED_MORE_SPACE) {
|
|
|
|
num_entries = num_entries * 2;
|
|
|
|
free(ooa.entries);
|
|
|
|
ooa.entries = NULL;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ooa.status != CTL_OOA_OK) {
|
|
|
|
warnx("%s: CTL_GET_OOA ioctl returned error %d", __func__,
|
|
|
|
ooa.status);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
fprintf(stdout, "Dumping OOA queues\n");
|
|
|
|
for (i = 0; i < ooa.fill_num; i++) {
|
|
|
|
struct ctl_ooa_entry *entry;
|
|
|
|
char cdb_str[(SCSI_MAX_CDBLEN * 3) +1];
|
|
|
|
struct bintime delta_bt;
|
|
|
|
struct timespec ts;
|
|
|
|
|
|
|
|
entry = &ooa.entries[i];
|
|
|
|
|
|
|
|
delta_bt = ooa.cur_bt;
|
|
|
|
bintime_sub(&delta_bt, &entry->start_bt);
|
|
|
|
bintime2timespec(&delta_bt, &ts);
|
|
|
|
cmd_latency = ts.tv_sec * 1000;
|
|
|
|
if (ts.tv_nsec > 0)
|
|
|
|
cmd_latency += ts.tv_nsec / 1000000;
|
2014-10-22 09:17:17 +00:00
|
|
|
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
fprintf(stdout, "LUN %jd tag 0x%04x%s%s%s%s%s: %s. CDB: %s "
|
|
|
|
"(%0.0Lf ms)\n",
|
|
|
|
(intmax_t)entry->lun_num, entry->tag_num,
|
|
|
|
(entry->cmd_flags & CTL_OOACMD_FLAG_BLOCKED) ?
|
|
|
|
" BLOCKED" : "",
|
|
|
|
(entry->cmd_flags & CTL_OOACMD_FLAG_DMA) ? " DMA" : "",
|
|
|
|
(entry->cmd_flags & CTL_OOACMD_FLAG_DMA_QUEUED) ?
|
|
|
|
" DMAQUEUED" : "",
|
|
|
|
(entry->cmd_flags & CTL_OOACMD_FLAG_ABORT) ?
|
|
|
|
" ABORT" : "",
|
|
|
|
(entry->cmd_flags & CTL_OOACMD_FLAG_RTR) ? " RTR" :"",
|
|
|
|
scsi_op_desc(entry->cdb[0], NULL),
|
|
|
|
scsi_cdb_string(entry->cdb, cdb_str, sizeof(cdb_str)),
|
|
|
|
cmd_latency);
|
|
|
|
}
|
|
|
|
fprintf(stdout, "OOA queues dump done\n");
|
|
|
|
#if 0
|
|
|
|
if (ioctl(fd, CTL_DUMP_OOA) == -1) {
|
|
|
|
warn("%s: CTL_DUMP_OOA ioctl failed", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
free(ooa.entries);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_dump_structs(int fd, ctladm_cmdargs cmdargs __unused)
|
|
|
|
{
|
|
|
|
if (ioctl(fd, CTL_DUMP_STRUCTS) == -1) {
|
|
|
|
warn(__func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_port_dump(int fd, int quiet, int xml, int32_t targ_port,
|
|
|
|
ctl_port_type port_type)
|
|
|
|
{
|
|
|
|
struct ctl_port_list port_list;
|
|
|
|
struct ctl_port_entry *entries;
|
|
|
|
struct sbuf *sb = NULL;
|
|
|
|
int num_entries;
|
|
|
|
int did_print = 0;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
num_entries = 16;
|
|
|
|
|
|
|
|
retry:
|
|
|
|
|
|
|
|
entries = malloc(sizeof(*entries) * num_entries);
|
|
|
|
bzero(&port_list, sizeof(port_list));
|
|
|
|
port_list.entries = entries;
|
|
|
|
port_list.alloc_num = num_entries;
|
|
|
|
port_list.alloc_len = num_entries * sizeof(*entries);
|
|
|
|
if (ioctl(fd, CTL_GET_PORT_LIST, &port_list) != 0) {
|
|
|
|
warn("%s: CTL_GET_PORT_LIST ioctl failed", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
if (port_list.status == CTL_PORT_LIST_NEED_MORE_SPACE) {
|
|
|
|
printf("%s: allocated %d, need %d, retrying\n", __func__,
|
|
|
|
num_entries, port_list.fill_num + port_list.dropped_num);
|
|
|
|
free(entries);
|
|
|
|
num_entries = port_list.fill_num + port_list.dropped_num;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((quiet == 0)
|
|
|
|
&& (xml == 0))
|
|
|
|
printf("Port Online Type Name pp vp %-18s %-18s\n",
|
|
|
|
"WWNN", "WWPN");
|
|
|
|
|
|
|
|
if (xml != 0) {
|
|
|
|
sb = sbuf_new_auto();
|
|
|
|
sbuf_printf(sb, "<ctlfelist>\n");
|
|
|
|
}
|
|
|
|
for (i = 0; i < port_list.fill_num; i++) {
|
|
|
|
struct ctl_port_entry *entry;
|
|
|
|
const char *type;
|
|
|
|
|
|
|
|
entry = &entries[i];
|
|
|
|
|
|
|
|
switch (entry->port_type) {
|
|
|
|
case CTL_PORT_FC:
|
|
|
|
type = "FC";
|
|
|
|
break;
|
|
|
|
case CTL_PORT_SCSI:
|
|
|
|
type = "SCSI";
|
|
|
|
break;
|
|
|
|
case CTL_PORT_IOCTL:
|
|
|
|
type = "IOCTL";
|
|
|
|
break;
|
|
|
|
case CTL_PORT_INTERNAL:
|
|
|
|
type = "INTERNAL";
|
|
|
|
break;
|
|
|
|
case CTL_PORT_ISC:
|
|
|
|
type = "ISC";
|
|
|
|
break;
|
2013-09-14 15:29:06 +00:00
|
|
|
case CTL_PORT_ISCSI:
|
|
|
|
type = "ISCSI";
|
|
|
|
break;
|
2014-07-07 11:05:04 +00:00
|
|
|
case CTL_PORT_SAS:
|
|
|
|
type = "SAS";
|
|
|
|
break;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
default:
|
|
|
|
type = "UNKNOWN";
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the user specified a frontend number or a particular
|
|
|
|
* frontend type, only print out that particular frontend
|
|
|
|
* or frontend type.
|
|
|
|
*/
|
|
|
|
if ((targ_port != -1)
|
|
|
|
&& (targ_port != entry->targ_port))
|
|
|
|
continue;
|
|
|
|
else if ((port_type != CTL_PORT_NONE)
|
|
|
|
&& ((port_type & entry->port_type) == 0))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
did_print = 1;
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
printf("Num: %ju Type: %s (%#x) Name: %s Physical Port: %d "
|
|
|
|
"Virtual Port: %d\n", (uintmax_t)entry->fe_num, type,
|
|
|
|
entry->port_type, entry->fe_name, entry->physical_port,
|
|
|
|
entry->virtual_port);
|
|
|
|
printf("WWNN %#jx WWPN %#jx Online: %s\n",
|
|
|
|
(uintmax_t)entry->wwnn, (uintmax_t)entry->wwpn,
|
|
|
|
(entry->online) ? "YES" : "NO" );
|
|
|
|
#endif
|
|
|
|
if (xml == 0) {
|
|
|
|
printf("%-4d %-6s %-8s %-12s %-2d %-2d %#-18jx "
|
|
|
|
"%#-18jx\n",
|
|
|
|
entry->targ_port, (entry->online) ? "YES" : "NO",
|
|
|
|
type, entry->port_name, entry->physical_port,
|
|
|
|
entry->virtual_port, (uintmax_t)entry->wwnn,
|
|
|
|
(uintmax_t)entry->wwpn);
|
|
|
|
} else {
|
|
|
|
sbuf_printf(sb, "<targ_port id=\"%d\">\n",
|
|
|
|
entry->targ_port);
|
|
|
|
sbuf_printf(sb, "<online>%s</online>\n",
|
|
|
|
(entry->online) ? "YES" : "NO");
|
|
|
|
sbuf_printf(sb, "<port_type>%s</port_type>\n", type);
|
|
|
|
sbuf_printf(sb, "<port_name>%s</port_name>\n",
|
|
|
|
entry->port_name);
|
|
|
|
sbuf_printf(sb, "<physical_port>%d</physical_port>\n",
|
|
|
|
entry->physical_port);
|
|
|
|
sbuf_printf(sb, "<virtual_port>%d</virtual_port>\n",
|
|
|
|
entry->virtual_port);
|
|
|
|
sbuf_printf(sb, "<wwnn>%#jx</wwnn>\n",
|
|
|
|
(uintmax_t)entry->wwnn);
|
|
|
|
sbuf_printf(sb, "<wwpn>%#jx</wwpn>\n",
|
|
|
|
(uintmax_t)entry->wwpn);
|
|
|
|
sbuf_printf(sb, "</targ_port>\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
if (xml != 0) {
|
|
|
|
sbuf_printf(sb, "</ctlfelist>\n");
|
2013-05-10 09:58:32 +00:00
|
|
|
if (sbuf_finish(sb) != 0)
|
|
|
|
err(1, "%s: sbuf_finish", __func__);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
printf("%s", sbuf_data(sb));
|
|
|
|
sbuf_delete(sb);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Give some indication that we didn't find the frontend or
|
|
|
|
* frontend type requested by the user. We could print something
|
|
|
|
* out, but it would probably be better to hide that behind a
|
|
|
|
* verbose flag.
|
|
|
|
*/
|
|
|
|
if ((did_print == 0)
|
|
|
|
&& ((targ_port != -1)
|
|
|
|
|| (port_type != CTL_PORT_NONE)))
|
|
|
|
return (1);
|
|
|
|
else
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
CCTL_PORT_MODE_NONE,
|
|
|
|
CCTL_PORT_MODE_LIST,
|
|
|
|
CCTL_PORT_MODE_SET,
|
|
|
|
CCTL_PORT_MODE_ON,
|
|
|
|
CCTL_PORT_MODE_OFF
|
|
|
|
} cctl_port_mode;
|
|
|
|
|
2012-10-19 14:49:42 +00:00
|
|
|
static struct ctladm_opts cctl_fe_table[] = {
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"fc", CTL_PORT_FC, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"scsi", CTL_PORT_SCSI, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"internal", CTL_PORT_INTERNAL, CTLADM_ARG_NONE, NULL},
|
2013-09-14 15:29:06 +00:00
|
|
|
{"iscsi", CTL_PORT_ISCSI, CTLADM_ARG_NONE, NULL},
|
2014-07-07 11:05:04 +00:00
|
|
|
{"sas", CTL_PORT_SAS, CTLADM_ARG_NONE, NULL},
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"all", CTL_PORT_ALL, CTLADM_ARG_NONE, NULL},
|
|
|
|
{NULL, 0, 0, NULL}
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_port(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
int c;
|
|
|
|
int32_t targ_port = -1;
|
|
|
|
int retval = 0;
|
|
|
|
int wwnn_set = 0, wwpn_set = 0;
|
|
|
|
uint64_t wwnn = 0, wwpn = 0;
|
|
|
|
cctl_port_mode port_mode = CCTL_PORT_MODE_NONE;
|
|
|
|
struct ctl_port_entry entry;
|
|
|
|
ctl_port_type port_type = CTL_PORT_NONE;
|
|
|
|
int quiet = 0, xml = 0;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'l':
|
|
|
|
if (port_mode != CCTL_PORT_MODE_NONE)
|
|
|
|
goto bailout_badarg;
|
|
|
|
|
|
|
|
port_mode = CCTL_PORT_MODE_LIST;
|
|
|
|
break;
|
|
|
|
case 'o':
|
|
|
|
if (port_mode != CCTL_PORT_MODE_NONE)
|
|
|
|
goto bailout_badarg;
|
2014-10-22 09:17:17 +00:00
|
|
|
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
if (strcasecmp(optarg, "on") == 0)
|
|
|
|
port_mode = CCTL_PORT_MODE_ON;
|
|
|
|
else if (strcasecmp(optarg, "off") == 0)
|
|
|
|
port_mode = CCTL_PORT_MODE_OFF;
|
|
|
|
else {
|
|
|
|
warnx("Invalid -o argument %s, \"on\" or "
|
|
|
|
"\"off\" are the only valid args",
|
|
|
|
optarg);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 'p':
|
|
|
|
targ_port = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'q':
|
|
|
|
quiet = 1;
|
|
|
|
break;
|
|
|
|
case 't': {
|
|
|
|
ctladm_optret optret;
|
|
|
|
ctladm_cmdargs argnum;
|
|
|
|
const char *subopt;
|
|
|
|
ctl_port_type tmp_port_type;
|
|
|
|
|
|
|
|
optret = getoption(cctl_fe_table, optarg, &tmp_port_type,
|
|
|
|
&argnum, &subopt);
|
|
|
|
if (optret == CC_OR_AMBIGUOUS) {
|
|
|
|
warnx("%s: ambiguous frontend type %s",
|
|
|
|
__func__, optarg);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
} else if (optret == CC_OR_NOT_FOUND) {
|
|
|
|
warnx("%s: invalid frontend type %s",
|
|
|
|
__func__, optarg);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
port_type |= tmp_port_type;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case 'w':
|
|
|
|
if ((port_mode != CCTL_PORT_MODE_NONE)
|
|
|
|
&& (port_mode != CCTL_PORT_MODE_SET))
|
|
|
|
goto bailout_badarg;
|
|
|
|
|
|
|
|
port_mode = CCTL_PORT_MODE_SET;
|
|
|
|
|
|
|
|
wwnn = strtoull(optarg, NULL, 0);
|
|
|
|
wwnn_set = 1;
|
|
|
|
break;
|
|
|
|
case 'W':
|
|
|
|
if ((port_mode != CCTL_PORT_MODE_NONE)
|
|
|
|
&& (port_mode != CCTL_PORT_MODE_SET))
|
|
|
|
goto bailout_badarg;
|
|
|
|
|
|
|
|
port_mode = CCTL_PORT_MODE_SET;
|
|
|
|
|
|
|
|
wwpn = strtoull(optarg, NULL, 0);
|
|
|
|
wwpn_set = 1;
|
|
|
|
break;
|
|
|
|
case 'x':
|
|
|
|
xml = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The user can specify either one or more frontend types (-t), or
|
|
|
|
* a specific frontend, but not both.
|
|
|
|
*
|
|
|
|
* If the user didn't specify a frontend type or number, set it to
|
|
|
|
* all. This is primarily needed for the enable/disable ioctls.
|
|
|
|
* This will be a no-op for the listing code. For the set ioctl,
|
|
|
|
* we'll throw an error, since that only works on one port at a time.
|
|
|
|
*/
|
|
|
|
if ((port_type != CTL_PORT_NONE) && (targ_port != -1)) {
|
|
|
|
warnx("%s: can only specify one of -t or -n", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
} else if ((targ_port == -1) && (port_type == CTL_PORT_NONE))
|
|
|
|
port_type = CTL_PORT_ALL;
|
|
|
|
|
2013-10-09 12:19:48 +00:00
|
|
|
bzero(&entry, sizeof(entry));
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* These are needed for all but list/dump mode.
|
|
|
|
*/
|
|
|
|
entry.port_type = port_type;
|
|
|
|
entry.targ_port = targ_port;
|
|
|
|
|
|
|
|
switch (port_mode) {
|
|
|
|
case CCTL_PORT_MODE_LIST:
|
|
|
|
cctl_port_dump(fd, quiet, xml, targ_port, port_type);
|
|
|
|
break;
|
|
|
|
case CCTL_PORT_MODE_SET:
|
|
|
|
if (targ_port == -1) {
|
|
|
|
warnx("%s: -w and -W require -n", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wwnn_set) {
|
|
|
|
entry.flags |= CTL_PORT_WWNN_VALID;
|
|
|
|
entry.wwnn = wwnn;
|
|
|
|
}
|
|
|
|
if (wwpn_set) {
|
|
|
|
entry.flags |= CTL_PORT_WWPN_VALID;
|
|
|
|
entry.wwpn = wwpn;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_SET_PORT_WWNS, &entry) == -1) {
|
|
|
|
warn("%s: CTL_SET_PORT_WWNS ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case CCTL_PORT_MODE_ON:
|
|
|
|
if (ioctl(fd, CTL_ENABLE_PORT, &entry) == -1) {
|
|
|
|
warn("%s: CTL_ENABLE_PORT ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
fprintf(stdout, "Front End Ports enabled\n");
|
|
|
|
break;
|
|
|
|
case CCTL_PORT_MODE_OFF:
|
|
|
|
if (ioctl(fd, CTL_DISABLE_PORT, &entry) == -1) {
|
|
|
|
warn("%s: CTL_DISABLE_PORT ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
fprintf(stdout, "Front End Ports disabled\n");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("%s: one of -l, -o or -w/-W must be specified", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
|
|
|
|
bailout_badarg:
|
|
|
|
warnx("%s: only one of -l, -o or -w/-W may be specified", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_do_io(int fd, int retries, union ctl_io *io, const char *func)
|
|
|
|
{
|
|
|
|
do {
|
|
|
|
if (ioctl(fd, CTL_IO, io) == -1) {
|
|
|
|
warn("%s: error sending CTL_IO ioctl", func);
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
} while (((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS)
|
|
|
|
&& (retries-- > 0));
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_delay(int fd, int target, int lun, int argc, char **argv,
|
|
|
|
char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_io_delay_info delay_info;
|
|
|
|
char *delayloc = NULL;
|
|
|
|
char *delaytype = NULL;
|
|
|
|
int delaytime = -1;
|
|
|
|
int retval;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
memset(&delay_info, 0, sizeof(delay_info));
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'T':
|
|
|
|
delaytype = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
delayloc = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 't':
|
|
|
|
delaytime = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (delaytime == -1) {
|
|
|
|
warnx("%s: you must specify the delaytime with -t", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (strcasecmp(delayloc, "datamove") == 0)
|
|
|
|
delay_info.delay_loc = CTL_DELAY_LOC_DATAMOVE;
|
|
|
|
else if (strcasecmp(delayloc, "done") == 0)
|
|
|
|
delay_info.delay_loc = CTL_DELAY_LOC_DONE;
|
|
|
|
else {
|
|
|
|
warnx("%s: invalid delay location %s", __func__, delayloc);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((delaytype == NULL)
|
|
|
|
|| (strcmp(delaytype, "oneshot") == 0))
|
|
|
|
delay_info.delay_type = CTL_DELAY_TYPE_ONESHOT;
|
|
|
|
else if (strcmp(delaytype, "cont") == 0)
|
|
|
|
delay_info.delay_type = CTL_DELAY_TYPE_CONT;
|
|
|
|
else {
|
|
|
|
warnx("%s: invalid delay type %s", __func__, delaytype);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
delay_info.target_id = target;
|
|
|
|
delay_info.lun_id = lun;
|
|
|
|
delay_info.delay_secs = delaytime;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_DELAY_IO, &delay_info) == -1) {
|
|
|
|
warn("%s: CTL_DELAY_IO ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
switch (delay_info.status) {
|
|
|
|
case CTL_DELAY_STATUS_NONE:
|
|
|
|
warnx("%s: no delay status??", __func__);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
case CTL_DELAY_STATUS_OK:
|
|
|
|
break;
|
|
|
|
case CTL_DELAY_STATUS_INVALID_LUN:
|
|
|
|
warnx("%s: invalid lun %d", __func__, lun);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
case CTL_DELAY_STATUS_INVALID_TYPE:
|
|
|
|
warnx("%s: invalid delay type %d", __func__,
|
|
|
|
delay_info.delay_type);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
case CTL_DELAY_STATUS_INVALID_LOC:
|
|
|
|
warnx("%s: delay location %s not implemented?", __func__,
|
|
|
|
delayloc);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
case CTL_DELAY_STATUS_NOT_IMPLEMENTED:
|
|
|
|
warnx("%s: delay not implemented in the kernel", __func__);
|
|
|
|
warnx("%s: recompile with the CTL_IO_DELAY flag set", __func__);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("%s: unknown delay return status %d", __func__,
|
|
|
|
delay_info.status);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
/* delayloc should never be NULL, but just in case...*/
|
|
|
|
if (delayloc != NULL)
|
|
|
|
free(delayloc);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_realsync(int fd, int argc, char **argv)
|
|
|
|
{
|
|
|
|
int syncstate;
|
|
|
|
int retval;
|
|
|
|
char *syncarg;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
if (argc != 3) {
|
|
|
|
warnx("%s %s takes exactly one argument", argv[0], argv[1]);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
syncarg = argv[2];
|
|
|
|
|
|
|
|
if (strncasecmp(syncarg, "query", min(strlen(syncarg),
|
|
|
|
strlen("query"))) == 0) {
|
|
|
|
if (ioctl(fd, CTL_REALSYNC_GET, &syncstate) == -1) {
|
|
|
|
warn("%s: CTL_REALSYNC_GET ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
fprintf(stdout, "SYNCHRONIZE CACHE support is: ");
|
|
|
|
switch (syncstate) {
|
|
|
|
case 0:
|
|
|
|
fprintf(stdout, "OFF\n");
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
fprintf(stdout, "ON\n");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
fprintf(stdout, "unknown (%d)\n", syncstate);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
goto bailout;
|
|
|
|
} else if (strcasecmp(syncarg, "on") == 0) {
|
|
|
|
syncstate = 1;
|
|
|
|
} else if (strcasecmp(syncarg, "off") == 0) {
|
|
|
|
syncstate = 0;
|
|
|
|
} else {
|
|
|
|
warnx("%s: invalid realsync argument %s", __func__, syncarg);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_REALSYNC_SET, &syncstate) == -1) {
|
|
|
|
warn("%s: CTL_REALSYNC_SET ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_getsetsync(int fd, int target, int lun, ctladm_cmdfunction command,
|
|
|
|
int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_sync_info sync_info;
|
|
|
|
uint32_t ioctl_cmd;
|
|
|
|
int sync_interval = -1;
|
|
|
|
int retval;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
memset(&sync_info, 0, sizeof(sync_info));
|
|
|
|
sync_info.target_id = target;
|
|
|
|
sync_info.lun_id = lun;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'i':
|
|
|
|
sync_interval = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (command == CTLADM_CMD_SETSYNC) {
|
|
|
|
if (sync_interval == -1) {
|
|
|
|
warnx("%s: you must specify the sync interval with -i",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
sync_info.sync_interval = sync_interval;
|
|
|
|
ioctl_cmd = CTL_SETSYNC;
|
|
|
|
} else {
|
|
|
|
ioctl_cmd = CTL_GETSYNC;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ioctl(fd, ioctl_cmd, &sync_info) == -1) {
|
|
|
|
warn("%s: CTL_%sSYNC ioctl failed", __func__,
|
|
|
|
(command == CTLADM_CMD_SETSYNC) ? "SET" : "GET");
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (sync_info.status) {
|
|
|
|
case CTL_GS_SYNC_OK:
|
|
|
|
if (command == CTLADM_CMD_GETSYNC) {
|
|
|
|
fprintf(stdout, "%d:%d: sync interval: %d\n",
|
|
|
|
target, lun, sync_info.sync_interval);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case CTL_GS_SYNC_NO_LUN:
|
|
|
|
warnx("%s: unknown target:LUN %d:%d", __func__, target, lun);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
case CTL_GS_SYNC_NONE:
|
|
|
|
default:
|
|
|
|
warnx("%s: unknown CTL_%sSYNC status %d", __func__,
|
|
|
|
(command == CTLADM_CMD_SETSYNC) ? "SET" : "GET",
|
|
|
|
sync_info.status);
|
|
|
|
retval = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
2012-10-19 14:49:42 +00:00
|
|
|
static struct ctladm_opts cctl_err_types[] = {
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"aborted", CTL_LUN_INJ_ABORTED, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"mediumerr", CTL_LUN_INJ_MEDIUM_ERR, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"ua", CTL_LUN_INJ_UA, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"custom", CTL_LUN_INJ_CUSTOM, CTLADM_ARG_NONE, NULL},
|
|
|
|
{NULL, 0, 0, NULL}
|
|
|
|
|
|
|
|
};
|
|
|
|
|
2012-10-19 14:49:42 +00:00
|
|
|
static struct ctladm_opts cctl_err_patterns[] = {
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{"read", CTL_LUN_PAT_READ, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"write", CTL_LUN_PAT_WRITE, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"rw", CTL_LUN_PAT_READWRITE, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"readwrite", CTL_LUN_PAT_READWRITE, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"readcap", CTL_LUN_PAT_READCAP, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"tur", CTL_LUN_PAT_TUR, CTLADM_ARG_NONE, NULL},
|
|
|
|
{"any", CTL_LUN_PAT_ANY, CTLADM_ARG_NONE, NULL},
|
|
|
|
#if 0
|
|
|
|
{"cmd", CTL_LUN_PAT_CMD, CTLADM_ARG_NONE, NULL},
|
|
|
|
#endif
|
|
|
|
{NULL, 0, 0, NULL}
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
2014-10-22 09:17:17 +00:00
|
|
|
cctl_error_inject(int fd, uint32_t target, uint32_t lun, int argc, char **argv,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
char *combinedopt)
|
|
|
|
{
|
In usr.sbin/ctladm/ctladm.c, function cctl_error_inject(), initialize
the 'retval' variable to zero, to avoid returning garbage in several
cases.
This fixes the following clang 3.2 warnings:
usr.sbin/ctladm/ctladm.c:1234:6: error: variable 'retval' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (ioctl(fd, CTL_ERROR_INJECT, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1243:10: note: uninitialized use occurs here
return (retval);
^~~~~~
usr.sbin/ctladm/ctladm.c:1234:2: note: remove the 'if' if its condition is always true
if (ioctl(fd, CTL_ERROR_INJECT, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1161:7: error: variable 'retval' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (ioctl(fd, CTL_ERROR_INJECT_DELETE, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1243:10: note: uninitialized use occurs here
return (retval);
^~~~~~
usr.sbin/ctladm/ctladm.c:1161:3: note: remove the 'if' if its condition is always true
if (ioctl(fd, CTL_ERROR_INJECT_DELETE, &err_desc) == -1) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
usr.sbin/ctladm/ctladm.c:1029:12: note: initialize the variable 'retval' to silence this warning
int retval;
^
= 0
MFC after: 1 week
2012-08-05 17:23:47 +00:00
|
|
|
int retval = 0;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
struct ctl_error_desc err_desc;
|
|
|
|
uint64_t lba = 0;
|
|
|
|
uint32_t len = 0;
|
|
|
|
uint64_t delete_id = 0;
|
|
|
|
int delete_id_set = 0;
|
|
|
|
int continuous = 0;
|
|
|
|
int sense_len = 0;
|
|
|
|
int fd_sense = 0;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
bzero(&err_desc, sizeof(err_desc));
|
|
|
|
err_desc.target_id = target;
|
|
|
|
err_desc.lun_id = lun;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'c':
|
|
|
|
continuous = 1;
|
|
|
|
break;
|
|
|
|
case 'd':
|
|
|
|
delete_id = strtoull(optarg, NULL, 0);
|
|
|
|
delete_id_set = 1;
|
|
|
|
break;
|
|
|
|
case 'i':
|
|
|
|
case 'p': {
|
|
|
|
ctladm_optret optret;
|
|
|
|
ctladm_cmdargs argnum;
|
|
|
|
const char *subopt;
|
|
|
|
|
|
|
|
if (c == 'i') {
|
|
|
|
ctl_lun_error err_type;
|
|
|
|
|
|
|
|
if (err_desc.lun_error != CTL_LUN_INJ_NONE) {
|
|
|
|
warnx("%s: can't specify multiple -i "
|
|
|
|
"arguments", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
optret = getoption(cctl_err_types, optarg,
|
|
|
|
&err_type, &argnum, &subopt);
|
|
|
|
err_desc.lun_error = err_type;
|
|
|
|
} else {
|
|
|
|
ctl_lun_error_pattern pattern;
|
|
|
|
|
|
|
|
optret = getoption(cctl_err_patterns, optarg,
|
|
|
|
&pattern, &argnum, &subopt);
|
|
|
|
err_desc.error_pattern |= pattern;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (optret == CC_OR_AMBIGUOUS) {
|
|
|
|
warnx("%s: ambiguous argument %s", __func__,
|
|
|
|
optarg);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
} else if (optret == CC_OR_NOT_FOUND) {
|
|
|
|
warnx("%s: argument %s not found", __func__,
|
|
|
|
optarg);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case 'r': {
|
|
|
|
char *tmpstr, *tmpstr2;
|
|
|
|
|
|
|
|
tmpstr = strdup(optarg);
|
|
|
|
if (tmpstr == NULL) {
|
|
|
|
warn("%s: error duplicating string %s",
|
|
|
|
__func__, optarg);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
tmpstr2 = strsep(&tmpstr, ",");
|
|
|
|
if (tmpstr2 == NULL) {
|
|
|
|
warnx("%s: invalid -r argument %s", __func__,
|
|
|
|
optarg);
|
|
|
|
retval = 1;
|
|
|
|
free(tmpstr);
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
lba = strtoull(tmpstr2, NULL, 0);
|
|
|
|
tmpstr2 = strsep(&tmpstr, ",");
|
|
|
|
if (tmpstr2 == NULL) {
|
|
|
|
warnx("%s: no len argument for -r lba,len, got"
|
|
|
|
" %s", __func__, optarg);
|
|
|
|
retval = 1;
|
|
|
|
free(tmpstr);
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
len = strtoul(tmpstr2, NULL, 0);
|
|
|
|
free(tmpstr);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case 's': {
|
|
|
|
struct get_hook hook;
|
|
|
|
char *sensestr;
|
|
|
|
|
|
|
|
sense_len = strtol(optarg, NULL, 0);
|
|
|
|
if (sense_len <= 0) {
|
|
|
|
warnx("invalid number of sense bytes %d",
|
|
|
|
sense_len);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
sense_len = MIN(sense_len, SSD_FULL_SIZE);
|
|
|
|
|
|
|
|
hook.argc = argc - optind;
|
|
|
|
hook.argv = argv + optind;
|
|
|
|
hook.got = 0;
|
|
|
|
|
|
|
|
sensestr = cget(&hook, NULL);
|
|
|
|
if ((sensestr != NULL)
|
|
|
|
&& (sensestr[0] == '-')) {
|
|
|
|
fd_sense = 1;
|
|
|
|
} else {
|
|
|
|
buff_encode_visit(
|
|
|
|
(uint8_t *)&err_desc.custom_sense,
|
|
|
|
sense_len, sensestr, iget, &hook);
|
|
|
|
}
|
|
|
|
optind += hook.got;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (delete_id_set != 0) {
|
|
|
|
err_desc.serial = delete_id;
|
|
|
|
if (ioctl(fd, CTL_ERROR_INJECT_DELETE, &err_desc) == -1) {
|
|
|
|
warn("%s: error issuing CTL_ERROR_INJECT_DELETE ioctl",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
}
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (err_desc.lun_error == CTL_LUN_INJ_NONE) {
|
|
|
|
warnx("%s: error injection command (-i) needed",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
} else if ((err_desc.lun_error == CTL_LUN_INJ_CUSTOM)
|
|
|
|
&& (sense_len == 0)) {
|
|
|
|
warnx("%s: custom error requires -s", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (continuous != 0)
|
|
|
|
err_desc.lun_error |= CTL_LUN_INJ_CONTINUOUS;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If fd_sense is set, we need to read the sense data the user
|
|
|
|
* wants returned from stdin.
|
|
|
|
*/
|
|
|
|
if (fd_sense == 1) {
|
|
|
|
ssize_t amt_read;
|
|
|
|
int amt_to_read = sense_len;
|
2014-10-22 09:17:17 +00:00
|
|
|
u_int8_t *buf_ptr = (uint8_t *)&err_desc.custom_sense;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
|
|
|
|
for (amt_read = 0; amt_to_read > 0;
|
|
|
|
amt_read = read(STDIN_FILENO, buf_ptr, amt_to_read)) {
|
|
|
|
if (amt_read == -1) {
|
2014-10-22 09:17:17 +00:00
|
|
|
warn("error reading sense data from stdin");
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
amt_to_read -= amt_read;
|
|
|
|
buf_ptr += amt_read;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (err_desc.error_pattern == CTL_LUN_PAT_NONE) {
|
|
|
|
warnx("%s: command pattern (-p) needed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (len != 0) {
|
|
|
|
err_desc.error_pattern |= CTL_LUN_PAT_RANGE;
|
|
|
|
/*
|
|
|
|
* We could check here to see whether it's a read/write
|
|
|
|
* command, but that will be pointless once we allow
|
|
|
|
* custom patterns. At that point, the user could specify
|
|
|
|
* a READ(6) CDB type, and we wouldn't have an easy way here
|
|
|
|
* to verify whether range checking is possible there. The
|
|
|
|
* user will just figure it out when his error never gets
|
|
|
|
* executed.
|
|
|
|
*/
|
|
|
|
#if 0
|
|
|
|
if ((err_desc.pattern & CTL_LUN_PAT_READWRITE) == 0) {
|
|
|
|
warnx("%s: need read and/or write pattern if range "
|
|
|
|
"is specified", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
err_desc.lba_range.lba = lba;
|
|
|
|
err_desc.lba_range.len = len;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_ERROR_INJECT, &err_desc) == -1) {
|
|
|
|
warn("%s: error issuing CTL_ERROR_INJECT ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
} else {
|
|
|
|
printf("Error injection succeeded, serial number is %ju\n",
|
|
|
|
(uintmax_t)err_desc.serial);
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_lunlist(int fd)
|
|
|
|
{
|
|
|
|
struct scsi_report_luns_data *lun_data;
|
|
|
|
struct scsi_inquiry_data *inq_data;
|
|
|
|
uint32_t num_luns;
|
|
|
|
int target;
|
|
|
|
int initid;
|
|
|
|
unsigned int i;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
inq_data = NULL;
|
|
|
|
|
|
|
|
target = 6;
|
|
|
|
initid = 7;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXX KDM assuming LUN 0 is fine, but we may need to change this
|
|
|
|
* if we ever acquire the ability to have multiple targets.
|
|
|
|
*/
|
|
|
|
if ((retval = cctl_get_luns(fd, target, /*lun*/ 0, initid,
|
|
|
|
/*retries*/ 2, &lun_data, &num_luns)) != 0)
|
|
|
|
goto bailout;
|
|
|
|
|
|
|
|
inq_data = malloc(sizeof(*inq_data));
|
|
|
|
if (inq_data == NULL) {
|
|
|
|
warn("%s: couldn't allocate memory for inquiry data\n",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
for (i = 0; i < num_luns; i++) {
|
|
|
|
char scsi_path[40];
|
|
|
|
int lun_val;
|
|
|
|
|
|
|
|
switch (lun_data->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) {
|
|
|
|
case RPL_LUNDATA_ATYP_PERIPH:
|
|
|
|
lun_val = lun_data->luns[i].lundata[1];
|
|
|
|
break;
|
|
|
|
case RPL_LUNDATA_ATYP_FLAT:
|
|
|
|
lun_val = (lun_data->luns[i].lundata[0] &
|
|
|
|
RPL_LUNDATA_FLAT_LUN_MASK) |
|
|
|
|
(lun_data->luns[i].lundata[1] <<
|
|
|
|
RPL_LUNDATA_FLAT_LUN_BITS);
|
|
|
|
break;
|
|
|
|
case RPL_LUNDATA_ATYP_LUN:
|
|
|
|
case RPL_LUNDATA_ATYP_EXTLUN:
|
|
|
|
default:
|
|
|
|
fprintf(stdout, "Unsupported LUN format %d\n",
|
|
|
|
lun_data->luns[i].lundata[0] &
|
|
|
|
RPL_LUNDATA_ATYP_MASK);
|
|
|
|
lun_val = -1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (lun_val == -1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if ((retval = cctl_get_inquiry(fd, target, lun_val, initid,
|
|
|
|
/*retries*/ 2, scsi_path,
|
|
|
|
sizeof(scsi_path),
|
|
|
|
inq_data)) != 0) {
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
printf("%s", scsi_path);
|
|
|
|
scsi_print_inquiry(inq_data);
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
if (lun_data != NULL)
|
|
|
|
free(lun_data);
|
|
|
|
|
|
|
|
if (inq_data != NULL)
|
|
|
|
free(inq_data);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_cfi_mt_statusstr(cfi_mt_status status, char *str, int str_len)
|
|
|
|
{
|
|
|
|
switch (status) {
|
|
|
|
case CFI_MT_PORT_OFFLINE:
|
|
|
|
snprintf(str, str_len, "Port Offline");
|
|
|
|
break;
|
|
|
|
case CFI_MT_ERROR:
|
|
|
|
snprintf(str, str_len, "Error");
|
|
|
|
break;
|
|
|
|
case CFI_MT_SUCCESS:
|
|
|
|
snprintf(str, str_len, "Success");
|
|
|
|
break;
|
|
|
|
case CFI_MT_NONE:
|
|
|
|
snprintf(str, str_len, "None??");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
snprintf(str, str_len, "Unknown status: %d", status);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_cfi_bbr_statusstr(cfi_bbrread_status status, char *str, int str_len)
|
|
|
|
{
|
|
|
|
switch (status) {
|
|
|
|
case CFI_BBR_SUCCESS:
|
|
|
|
snprintf(str, str_len, "Success");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_LUN_UNCONFIG:
|
|
|
|
snprintf(str, str_len, "LUN not configured");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_NO_LUN:
|
|
|
|
snprintf(str, str_len, "LUN does not exist");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_NO_MEM:
|
|
|
|
snprintf(str, str_len, "Memory allocation error");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_BAD_LEN:
|
|
|
|
snprintf(str, str_len, "Length is not a multiple of blocksize");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_RESERV_CONFLICT:
|
|
|
|
snprintf(str, str_len, "Reservation conflict");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_LUN_STOPPED:
|
|
|
|
snprintf(str, str_len, "LUN is powered off");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_LUN_OFFLINE_CTL:
|
|
|
|
snprintf(str, str_len, "LUN is offline");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_LUN_OFFLINE_RC:
|
|
|
|
snprintf(str, str_len, "RAIDCore array is offline (double "
|
|
|
|
"failure?)");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_SCSI_ERROR:
|
|
|
|
snprintf(str, str_len, "SCSI Error");
|
|
|
|
break;
|
|
|
|
case CFI_BBR_ERROR:
|
|
|
|
snprintf(str, str_len, "Error");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
snprintf(str, str_len, "Unknown status: %d", status);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_hardstopstart(int fd, ctladm_cmdfunction command)
|
|
|
|
{
|
|
|
|
struct ctl_hard_startstop_info hs_info;
|
|
|
|
char error_str[256];
|
|
|
|
int do_start;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
if (command == CTLADM_CMD_HARDSTART)
|
|
|
|
do_start = 1;
|
|
|
|
else
|
|
|
|
do_start = 0;
|
|
|
|
|
|
|
|
if (ioctl(fd, (do_start == 1) ? CTL_HARD_START : CTL_HARD_STOP,
|
|
|
|
&hs_info) == -1) {
|
|
|
|
warn("%s: CTL_HARD_%s ioctl failed", __func__,
|
|
|
|
(do_start == 1) ? "START" : "STOP");
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
fprintf(stdout, "Hard %s Status: ", (command == CTLADM_CMD_HARDSTOP) ?
|
|
|
|
"Stop" : "Start");
|
|
|
|
cctl_cfi_mt_statusstr(hs_info.status, error_str, sizeof(error_str));
|
|
|
|
fprintf(stdout, "%s\n", error_str);
|
|
|
|
fprintf(stdout, "Total LUNs: %d\n", hs_info.total_luns);
|
|
|
|
fprintf(stdout, "LUNs complete: %d\n", hs_info.luns_complete);
|
|
|
|
fprintf(stdout, "LUNs failed: %d\n", hs_info.luns_failed);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_bbrread(int fd, int target __unused, int lun, int iid __unused,
|
|
|
|
int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_bbrread_info bbr_info;
|
|
|
|
char error_str[256];
|
|
|
|
int datalen = -1;
|
|
|
|
uint64_t lba = 0;
|
|
|
|
int lba_set = 0;
|
|
|
|
int retval;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'd':
|
|
|
|
datalen = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
lba = strtoull(optarg, NULL, 0);
|
|
|
|
lba_set = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (lba_set == 0) {
|
|
|
|
warnx("%s: you must specify an LBA with -l", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (datalen == -1) {
|
|
|
|
warnx("%s: you must specify a length with -d", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
bbr_info.lun_num = lun;
|
|
|
|
bbr_info.lba = lba;
|
|
|
|
/*
|
|
|
|
* XXX KDM get the blocksize first??
|
|
|
|
*/
|
|
|
|
if ((datalen % 512) != 0) {
|
|
|
|
warnx("%s: data length %d is not a multiple of 512 bytes",
|
|
|
|
__func__, datalen);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
bbr_info.len = datalen;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_BBRREAD, &bbr_info) == -1) {
|
|
|
|
warn("%s: CTL_BBRREAD ioctl failed", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
cctl_cfi_mt_statusstr(bbr_info.status, error_str, sizeof(error_str));
|
|
|
|
fprintf(stdout, "BBR Read Overall Status: %s\n", error_str);
|
|
|
|
cctl_cfi_bbr_statusstr(bbr_info.bbr_status, error_str,
|
|
|
|
sizeof(error_str));
|
|
|
|
fprintf(stdout, "BBR Read Status: %s\n", error_str);
|
|
|
|
/*
|
|
|
|
* XXX KDM should we bother printing out SCSI status if we get
|
|
|
|
* CFI_BBR_SCSI_ERROR back?
|
|
|
|
*
|
|
|
|
* Return non-zero if this fails?
|
|
|
|
*/
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_startup_shutdown(int fd, int target, int lun, int iid,
|
|
|
|
ctladm_cmdfunction command)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
struct scsi_report_luns_data *lun_data;
|
|
|
|
struct scsi_inquiry_data *inq_data;
|
|
|
|
uint32_t num_luns;
|
|
|
|
unsigned int i;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
inq_data = NULL;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* - report luns
|
|
|
|
* - step through each lun, do an inquiry
|
|
|
|
* - check OOA queue on direct access luns
|
|
|
|
* - send stop with offline bit to each direct access device with a
|
|
|
|
* clear OOA queue
|
|
|
|
* - if we get a reservation conflict, reset the LUN to clear it
|
|
|
|
* and reissue the stop with the offline bit set
|
|
|
|
*/
|
|
|
|
|
|
|
|
id.id = iid;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warnx("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((retval = cctl_get_luns(fd, target, lun, iid, /*retries*/ 2,
|
|
|
|
&lun_data, &num_luns)) != 0)
|
|
|
|
goto bailout;
|
|
|
|
|
|
|
|
inq_data = malloc(sizeof(*inq_data));
|
|
|
|
if (inq_data == NULL) {
|
|
|
|
warn("%s: couldn't allocate memory for inquiry data\n",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
for (i = 0; i < num_luns; i++) {
|
|
|
|
char scsi_path[40];
|
|
|
|
int lun_val;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXX KDM figure out a way to share this code with
|
|
|
|
* cctl_lunlist()?
|
|
|
|
*/
|
|
|
|
switch (lun_data->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) {
|
|
|
|
case RPL_LUNDATA_ATYP_PERIPH:
|
|
|
|
lun_val = lun_data->luns[i].lundata[1];
|
|
|
|
break;
|
|
|
|
case RPL_LUNDATA_ATYP_FLAT:
|
|
|
|
lun_val = (lun_data->luns[i].lundata[0] &
|
|
|
|
RPL_LUNDATA_FLAT_LUN_MASK) |
|
|
|
|
(lun_data->luns[i].lundata[1] <<
|
|
|
|
RPL_LUNDATA_FLAT_LUN_BITS);
|
|
|
|
break;
|
|
|
|
case RPL_LUNDATA_ATYP_LUN:
|
|
|
|
case RPL_LUNDATA_ATYP_EXTLUN:
|
|
|
|
default:
|
|
|
|
fprintf(stdout, "Unsupported LUN format %d\n",
|
|
|
|
lun_data->luns[i].lundata[0] &
|
|
|
|
RPL_LUNDATA_ATYP_MASK);
|
|
|
|
lun_val = -1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (lun_val == -1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if ((retval = cctl_get_inquiry(fd, target, lun_val, iid,
|
|
|
|
/*retries*/ 2, scsi_path,
|
|
|
|
sizeof(scsi_path),
|
|
|
|
inq_data)) != 0) {
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
printf("%s", scsi_path);
|
|
|
|
scsi_print_inquiry(inq_data);
|
|
|
|
/*
|
|
|
|
* We only want to shutdown direct access devices.
|
|
|
|
*/
|
|
|
|
if (SID_TYPE(inq_data) != T_DIRECT) {
|
|
|
|
printf("%s LUN is not direct access, skipped\n",
|
|
|
|
scsi_path);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (command == CTLADM_CMD_SHUTDOWN) {
|
|
|
|
struct ctl_ooa_info ooa_info;
|
|
|
|
|
|
|
|
ooa_info.target_id = target;
|
|
|
|
ooa_info.lun_id = lun_val;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_CHECK_OOA, &ooa_info) == -1) {
|
|
|
|
printf("%s CTL_CHECK_OOA ioctl failed\n",
|
|
|
|
scsi_path);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ooa_info.status != CTL_OOA_SUCCESS) {
|
2014-10-22 09:17:17 +00:00
|
|
|
printf("%s CTL_CHECK_OOA returned status %d\n",
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
scsi_path, ooa_info.status);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
if (ooa_info.num_entries != 0) {
|
|
|
|
printf("%s %d entr%s in the OOA queue, "
|
|
|
|
"skipping shutdown\n", scsi_path,
|
|
|
|
ooa_info.num_entries,
|
|
|
|
(ooa_info.num_entries > 1)?"ies" : "y" );
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
2014-10-22 09:17:17 +00:00
|
|
|
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
ctl_scsi_start_stop(/*io*/ io,
|
|
|
|
/*start*/(command == CTLADM_CMD_STARTUP) ?
|
|
|
|
1 : 0,
|
|
|
|
/*load_eject*/ 0,
|
|
|
|
/*immediate*/ 0,
|
|
|
|
/*power_conditions*/ SSS_PC_START_VALID,
|
|
|
|
/*onoffline*/ 1,
|
|
|
|
/*ctl_tag_type*/
|
|
|
|
(command == CTLADM_CMD_STARTUP) ?
|
|
|
|
CTL_TAG_SIMPLE :CTL_TAG_ORDERED,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun_val;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, /*retries*/ 3, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS)
|
|
|
|
ctl_io_error_print(io, inq_data, stderr);
|
|
|
|
else {
|
|
|
|
printf("%s LUN is now %s\n", scsi_path,
|
|
|
|
(command == CTLADM_CMD_STARTUP) ? "online" :
|
|
|
|
"offline");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
if (lun_data != NULL)
|
|
|
|
free(lun_data);
|
|
|
|
|
|
|
|
if (inq_data != NULL)
|
|
|
|
free(inq_data);
|
|
|
|
|
|
|
|
if (io != NULL)
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_sync_cache(int fd, int target, int lun, int iid, int retries,
|
|
|
|
int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
int cdb_size = -1;
|
|
|
|
int retval;
|
|
|
|
uint64_t our_lba = 0;
|
|
|
|
uint32_t our_block_count = 0;
|
2014-10-22 09:17:17 +00:00
|
|
|
int reladr = 0, immed = 0;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
int c;
|
|
|
|
|
|
|
|
id.id = iid;
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warnx("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'b':
|
|
|
|
our_block_count = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'c':
|
|
|
|
cdb_size = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'i':
|
|
|
|
immed = 1;
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
our_lba = strtoull(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'r':
|
|
|
|
reladr = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (cdb_size != -1) {
|
|
|
|
switch (cdb_size) {
|
|
|
|
case 10:
|
|
|
|
case 16:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("%s: invalid cdbsize %d, valid sizes are 10 "
|
|
|
|
"and 16", __func__, cdb_size);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
break; /* NOTREACHED */
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
cdb_size = 10;
|
|
|
|
|
|
|
|
ctl_scsi_sync_cache(/*io*/ io,
|
|
|
|
/*immed*/ immed,
|
|
|
|
/*reladr*/ reladr,
|
|
|
|
/*minimum_cdb_size*/ cdb_size,
|
|
|
|
/*starting_lba*/ our_lba,
|
|
|
|
/*block_count*/ our_block_count,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
fprintf(stdout, "Cache synchronized successfully\n");
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_start_stop(int fd, int target, int lun, int iid, int retries, int start,
|
|
|
|
int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
char scsi_path[40];
|
|
|
|
int immed = 0, onoffline = 0;
|
|
|
|
int retval, c;
|
|
|
|
|
|
|
|
id.id = iid;
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warnx("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'i':
|
|
|
|
immed = 1;
|
|
|
|
break;
|
|
|
|
case 'o':
|
|
|
|
onoffline = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Use an ordered tag for the stop command, to guarantee that any
|
|
|
|
* pending I/O will finish before the stop command executes. This
|
|
|
|
* would normally be the case anyway, since CTL will basically
|
|
|
|
* treat the start/stop command as an ordered command with respect
|
|
|
|
* to any other command except an INQUIRY. (See ctl_ser_table.c.)
|
|
|
|
*/
|
|
|
|
ctl_scsi_start_stop(/*io*/ io,
|
|
|
|
/*start*/ start,
|
|
|
|
/*load_eject*/ 0,
|
|
|
|
/*immediate*/ immed,
|
|
|
|
/*power_conditions*/ SSS_PC_START_VALID,
|
|
|
|
/*onoffline*/ onoffline,
|
|
|
|
/*ctl_tag_type*/ start ? CTL_TAG_SIMPLE :
|
|
|
|
CTL_TAG_ORDERED,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
ctl_scsi_path_string(io, scsi_path, sizeof(scsi_path));
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
fprintf(stdout, "%s LUN %s successfully\n", scsi_path,
|
|
|
|
(start) ? "started" : "stopped");
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2014-10-22 09:17:17 +00:00
|
|
|
cctl_mode_sense(int fd, int target, int lun, int iid, int retries,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
uint32_t datalen;
|
|
|
|
uint8_t *dataptr;
|
|
|
|
int pc = -1, cdbsize, retval, dbd = 0, subpage = -1;
|
|
|
|
int list = 0;
|
|
|
|
int page_code = -1;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
id.id = iid;
|
|
|
|
cdbsize = 0;
|
|
|
|
retval = 0;
|
|
|
|
dataptr = NULL;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warn("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'P':
|
|
|
|
pc = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'S':
|
|
|
|
subpage = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'd':
|
|
|
|
dbd = 1;
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
list = 1;
|
|
|
|
break;
|
|
|
|
case 'm':
|
|
|
|
page_code = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'c':
|
|
|
|
cdbsize = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (((list == 0) && (page_code == -1))
|
|
|
|
|| ((list != 0) && (page_code != -1))) {
|
|
|
|
warnx("%s: you must specify either a page code (-m) or -l",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((page_code != -1)
|
|
|
|
&& ((page_code > SMS_ALL_PAGES_PAGE)
|
|
|
|
|| (page_code < 0))) {
|
|
|
|
warnx("%s: page code %d is out of range", __func__,
|
|
|
|
page_code);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (list == 1) {
|
|
|
|
page_code = SMS_ALL_PAGES_PAGE;
|
|
|
|
if (pc != -1) {
|
|
|
|
warnx("%s: arg -P makes no sense with -l",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
if (subpage != -1) {
|
|
|
|
warnx("%s: arg -S makes no sense with -l", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pc == -1)
|
|
|
|
pc = SMS_PAGE_CTRL_CURRENT;
|
|
|
|
else {
|
|
|
|
if ((pc > 3)
|
|
|
|
|| (pc < 0)) {
|
|
|
|
warnx("%s: page control value %d is out of range: 0-3",
|
|
|
|
__func__, pc);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
if ((subpage != -1)
|
|
|
|
&& ((subpage > 255)
|
|
|
|
|| (subpage < 0))) {
|
|
|
|
warnx("%s: subpage code %d is out of range: 0-255", __func__,
|
|
|
|
subpage);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
if (cdbsize != 0) {
|
|
|
|
switch (cdbsize) {
|
|
|
|
case 6:
|
|
|
|
case 10:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("%s: invalid cdbsize %d, valid sizes are 6 "
|
|
|
|
"and 10", __func__, cdbsize);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
cdbsize = 6;
|
|
|
|
|
|
|
|
if (subpage == -1)
|
|
|
|
subpage = 0;
|
|
|
|
|
|
|
|
if (cdbsize == 6)
|
|
|
|
datalen = 255;
|
|
|
|
else
|
|
|
|
datalen = 65535;
|
|
|
|
|
|
|
|
dataptr = (uint8_t *)malloc(datalen);
|
|
|
|
if (dataptr == NULL) {
|
|
|
|
warn("%s: can't allocate %d bytes", __func__, datalen);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(dataptr, 0, datalen);
|
|
|
|
|
|
|
|
ctl_scsi_mode_sense(io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ datalen,
|
|
|
|
/*dbd*/ dbd,
|
|
|
|
/*llbaa*/ 0,
|
|
|
|
/*page_code*/ page_code,
|
|
|
|
/*pc*/ pc << 6,
|
|
|
|
/*subpage*/ subpage,
|
|
|
|
/*minimum_cdb_size*/ cdbsize,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
int pages_len, used_len;
|
|
|
|
uint32_t returned_len;
|
|
|
|
uint8_t *ndataptr;
|
|
|
|
|
|
|
|
if (io->scsiio.cdb[0] == MODE_SENSE_6) {
|
|
|
|
struct scsi_mode_hdr_6 *hdr6;
|
|
|
|
int bdlen;
|
|
|
|
|
|
|
|
hdr6 = (struct scsi_mode_hdr_6 *)dataptr;
|
|
|
|
|
|
|
|
returned_len = hdr6->datalen + 1;
|
|
|
|
bdlen = hdr6->block_descr_len;
|
|
|
|
|
|
|
|
ndataptr = (uint8_t *)((uint8_t *)&hdr6[1] + bdlen);
|
|
|
|
} else {
|
|
|
|
struct scsi_mode_hdr_10 *hdr10;
|
|
|
|
int bdlen;
|
|
|
|
|
|
|
|
hdr10 = (struct scsi_mode_hdr_10 *)dataptr;
|
|
|
|
|
|
|
|
returned_len = scsi_2btoul(hdr10->datalen) + 2;
|
|
|
|
bdlen = scsi_2btoul(hdr10->block_descr_len);
|
|
|
|
|
|
|
|
ndataptr = (uint8_t *)((uint8_t *)&hdr10[1] + bdlen);
|
|
|
|
}
|
|
|
|
/* just in case they can give us more than we allocated for */
|
|
|
|
returned_len = min(returned_len, datalen);
|
|
|
|
pages_len = returned_len - (ndataptr - dataptr);
|
|
|
|
#if 0
|
|
|
|
fprintf(stdout, "returned_len = %d, pages_len = %d\n",
|
|
|
|
returned_len, pages_len);
|
|
|
|
#endif
|
|
|
|
if (list == 1) {
|
|
|
|
fprintf(stdout, "Supported mode pages:\n");
|
|
|
|
for (used_len = 0; used_len < pages_len;) {
|
|
|
|
struct scsi_mode_page_header *header;
|
|
|
|
|
|
|
|
header = (struct scsi_mode_page_header *)
|
|
|
|
&ndataptr[used_len];
|
|
|
|
fprintf(stdout, "%d\n", header->page_code);
|
|
|
|
used_len += header->page_length + 2;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (used_len = 0; used_len < pages_len; used_len++) {
|
|
|
|
fprintf(stdout, "0x%x ", ndataptr[used_len]);
|
|
|
|
if (((used_len+1) % 16) == 0)
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
}
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
if (dataptr != NULL)
|
|
|
|
free(dataptr);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2014-10-22 09:17:17 +00:00
|
|
|
cctl_read_capacity(int fd, int target, int lun, int iid, int retries,
|
|
|
|
int argc, char **argv, char *combinedopt)
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
struct scsi_read_capacity_data *data;
|
|
|
|
struct scsi_read_capacity_data_long *longdata;
|
|
|
|
int cdbsize = -1, retval;
|
|
|
|
uint8_t *dataptr;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
cdbsize = 10;
|
|
|
|
dataptr = NULL;
|
|
|
|
retval = 0;
|
|
|
|
id.id = iid;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warn("%s: can't allocate memory\n", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'c':
|
|
|
|
cdbsize = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (cdbsize != -1) {
|
|
|
|
switch (cdbsize) {
|
|
|
|
case 10:
|
|
|
|
case 16:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("%s: invalid cdbsize %d, valid sizes are 10 "
|
|
|
|
"and 16", __func__, cdbsize);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
break; /* NOTREACHED */
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
cdbsize = 10;
|
|
|
|
|
|
|
|
dataptr = (uint8_t *)malloc(sizeof(*longdata));
|
|
|
|
if (dataptr == NULL) {
|
|
|
|
warn("%s: can't allocate %zd bytes\n", __func__,
|
|
|
|
sizeof(*longdata));
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
memset(dataptr, 0, sizeof(*longdata));
|
|
|
|
|
|
|
|
retry:
|
|
|
|
|
|
|
|
switch (cdbsize) {
|
|
|
|
case 10:
|
|
|
|
ctl_scsi_read_capacity(io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ sizeof(*longdata),
|
|
|
|
/*addr*/ 0,
|
|
|
|
/*reladr*/ 0,
|
|
|
|
/*pmi*/ 0,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
break;
|
|
|
|
case 16:
|
|
|
|
ctl_scsi_read_capacity_16(io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ sizeof(*longdata),
|
|
|
|
/*addr*/ 0,
|
|
|
|
/*reladr*/ 0,
|
|
|
|
/*pmi*/ 0,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
uint64_t maxlba;
|
|
|
|
uint32_t blocksize;
|
|
|
|
|
|
|
|
if (cdbsize == 10) {
|
|
|
|
|
|
|
|
data = (struct scsi_read_capacity_data *)dataptr;
|
|
|
|
|
|
|
|
maxlba = scsi_4btoul(data->addr);
|
|
|
|
blocksize = scsi_4btoul(data->length);
|
|
|
|
|
|
|
|
if (maxlba == 0xffffffff) {
|
|
|
|
cdbsize = 16;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
longdata=(struct scsi_read_capacity_data_long *)dataptr;
|
|
|
|
|
|
|
|
maxlba = scsi_8btou64(longdata->addr);
|
|
|
|
blocksize = scsi_4btoul(longdata->length);
|
|
|
|
}
|
|
|
|
|
|
|
|
fprintf(stdout, "Disk Capacity: %ju, Blocksize: %d\n",
|
|
|
|
(uintmax_t)maxlba, blocksize);
|
|
|
|
} else {
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
if (dataptr != NULL)
|
|
|
|
free(dataptr);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_read_write(int fd, int target, int lun, int iid, int retries,
|
|
|
|
int argc, char **argv, char *combinedopt,
|
|
|
|
ctladm_cmdfunction command)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
int file_fd, do_stdio;
|
|
|
|
int cdbsize = -1, databytes;
|
|
|
|
uint8_t *dataptr;
|
|
|
|
char *filename = NULL;
|
|
|
|
int datalen = -1, blocksize = -1;
|
|
|
|
uint64_t lba = 0;
|
|
|
|
int lba_set = 0;
|
|
|
|
int retval;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
do_stdio = 0;
|
|
|
|
dataptr = NULL;
|
|
|
|
file_fd = -1;
|
|
|
|
id.id = iid;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warn("%s: can't allocate memory\n", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'N':
|
|
|
|
io->io_hdr.flags |= CTL_FLAG_NO_DATAMOVE;
|
|
|
|
break;
|
|
|
|
case 'b':
|
|
|
|
blocksize = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'c':
|
|
|
|
cdbsize = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'd':
|
|
|
|
datalen = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'f':
|
|
|
|
filename = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
lba = strtoull(optarg, NULL, 0);
|
|
|
|
lba_set = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (filename == NULL) {
|
|
|
|
warnx("%s: you must supply a filename using -f", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (datalen == -1) {
|
|
|
|
warnx("%s: you must specify the data length with -d", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (lba_set == 0) {
|
|
|
|
warnx("%s: you must specify the LBA with -l", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (blocksize == -1) {
|
|
|
|
warnx("%s: you must specify the blocksize with -b", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (cdbsize != -1) {
|
|
|
|
switch (cdbsize) {
|
|
|
|
case 6:
|
|
|
|
case 10:
|
|
|
|
case 12:
|
|
|
|
case 16:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("%s: invalid cdbsize %d, valid sizes are 6, "
|
|
|
|
"10, 12 or 16", __func__, cdbsize);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
break; /* NOTREACHED */
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
cdbsize = 6;
|
|
|
|
|
|
|
|
databytes = datalen * blocksize;
|
|
|
|
dataptr = (uint8_t *)malloc(databytes);
|
|
|
|
|
|
|
|
if (dataptr == NULL) {
|
|
|
|
warn("%s: can't allocate %d bytes\n", __func__, databytes);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
if (strcmp(filename, "-") == 0) {
|
|
|
|
if (command == CTLADM_CMD_READ)
|
|
|
|
file_fd = STDOUT_FILENO;
|
|
|
|
else
|
|
|
|
file_fd = STDIN_FILENO;
|
|
|
|
do_stdio = 1;
|
|
|
|
} else {
|
|
|
|
file_fd = open(filename, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR);
|
|
|
|
if (file_fd == -1) {
|
|
|
|
warn("%s: can't open file %s", __func__, filename);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(dataptr, 0, databytes);
|
|
|
|
|
|
|
|
if (command == CTLADM_CMD_WRITE) {
|
|
|
|
int bytes_read;
|
|
|
|
|
|
|
|
bytes_read = read(file_fd, dataptr, databytes);
|
|
|
|
if (bytes_read == -1) {
|
|
|
|
warn("%s: error reading file %s", __func__, filename);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
if (bytes_read != databytes) {
|
|
|
|
warnx("%s: only read %d bytes from file %s",
|
|
|
|
__func__, bytes_read, filename);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
ctl_scsi_read_write(io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ databytes,
|
|
|
|
/*read_op*/ (command == CTLADM_CMD_READ) ? 1 : 0,
|
|
|
|
/*byte2*/ 0,
|
|
|
|
/*minimum_cdb_size*/ cdbsize,
|
|
|
|
/*lba*/ lba,
|
|
|
|
/*num_blocks*/ datalen,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS)
|
|
|
|
&& (command == CTLADM_CMD_READ)) {
|
|
|
|
int bytes_written;
|
|
|
|
|
|
|
|
bytes_written = write(file_fd, dataptr, databytes);
|
|
|
|
if (bytes_written == -1) {
|
|
|
|
warn("%s: can't write to %s", __func__, filename);
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
} else if ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS)
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
if (dataptr != NULL)
|
|
|
|
free(dataptr);
|
|
|
|
|
|
|
|
if ((do_stdio == 0)
|
|
|
|
&& (file_fd != -1))
|
|
|
|
close(file_fd);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_get_luns(int fd, int target, int lun, int iid, int retries, struct
|
|
|
|
scsi_report_luns_data **lun_data, uint32_t *num_luns)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
uint32_t nluns;
|
|
|
|
int lun_datalen;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
id.id = iid;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warnx("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* lun_data includes space for 1 lun, allocate space for 4 initially.
|
|
|
|
* If that isn't enough, we'll allocate more.
|
|
|
|
*/
|
|
|
|
nluns = 4;
|
|
|
|
retry:
|
|
|
|
lun_datalen = sizeof(*lun_data) +
|
|
|
|
(nluns * sizeof(struct scsi_report_luns_lundata));
|
|
|
|
*lun_data = malloc(lun_datalen);
|
|
|
|
|
|
|
|
if (*lun_data == NULL) {
|
|
|
|
warnx("%s: can't allocate memory", __func__);
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
ctl_scsi_report_luns(io,
|
|
|
|
/*data_ptr*/ (uint8_t *)*lun_data,
|
|
|
|
/*data_len*/ lun_datalen,
|
|
|
|
/*select_report*/ RPL_REPORT_ALL,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
uint32_t returned_len, returned_luns;
|
|
|
|
|
|
|
|
returned_len = scsi_4btoul((*lun_data)->length);
|
|
|
|
returned_luns = returned_len / 8;
|
|
|
|
if (returned_luns > nluns) {
|
|
|
|
nluns = returned_luns;
|
|
|
|
free(*lun_data);
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
/* These should be the same */
|
|
|
|
*num_luns = MIN(returned_luns, nluns);
|
|
|
|
} else {
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
retval = 1;
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_report_luns(int fd, int target, int lun, int iid, int retries)
|
|
|
|
{
|
|
|
|
struct scsi_report_luns_data *lun_data;
|
|
|
|
uint32_t num_luns, i;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
lun_data = NULL;
|
|
|
|
|
|
|
|
if ((retval = cctl_get_luns(fd, target, lun, iid, retries, &lun_data,
|
|
|
|
&num_luns)) != 0)
|
|
|
|
goto bailout;
|
|
|
|
|
|
|
|
fprintf(stdout, "%u LUNs returned\n", num_luns);
|
|
|
|
for (i = 0; i < num_luns; i++) {
|
|
|
|
int lun_val;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXX KDM figure out a way to share this code with
|
|
|
|
* cctl_lunlist()?
|
|
|
|
*/
|
|
|
|
switch (lun_data->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) {
|
|
|
|
case RPL_LUNDATA_ATYP_PERIPH:
|
|
|
|
lun_val = lun_data->luns[i].lundata[1];
|
|
|
|
break;
|
|
|
|
case RPL_LUNDATA_ATYP_FLAT:
|
|
|
|
lun_val = (lun_data->luns[i].lundata[0] &
|
|
|
|
RPL_LUNDATA_FLAT_LUN_MASK) |
|
|
|
|
(lun_data->luns[i].lundata[1] <<
|
|
|
|
RPL_LUNDATA_FLAT_LUN_BITS);
|
|
|
|
break;
|
|
|
|
case RPL_LUNDATA_ATYP_LUN:
|
|
|
|
case RPL_LUNDATA_ATYP_EXTLUN:
|
|
|
|
default:
|
|
|
|
fprintf(stdout, "Unsupported LUN format %d\n",
|
|
|
|
lun_data->luns[i].lundata[0] &
|
|
|
|
RPL_LUNDATA_ATYP_MASK);
|
|
|
|
lun_val = -1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (lun_val == -1)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
fprintf(stdout, "%d\n", lun_val);
|
|
|
|
}
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
if (lun_data != NULL)
|
|
|
|
free(lun_data);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_tur(int fd, int target, int lun, int iid, int retries)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
|
|
|
|
id.id = iid;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
fprintf(stderr, "can't allocate memory\n");
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
ctl_scsi_tur(io,
|
|
|
|
/* tag_type */ CTL_TAG_SIMPLE,
|
|
|
|
/* control */ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS)
|
|
|
|
fprintf(stdout, "Unit is ready\n");
|
|
|
|
else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2014-10-22 09:17:17 +00:00
|
|
|
cctl_get_inquiry(int fd, int target, int lun, int iid, int retries,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
char *path_str, int path_len,
|
|
|
|
struct scsi_inquiry_data *inq_data)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
id.id = iid;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warnx("cctl_inquiry: can't allocate memory\n");
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
ctl_scsi_inquiry(/*io*/ io,
|
|
|
|
/*data_ptr*/ (uint8_t *)inq_data,
|
|
|
|
/*data_len*/ sizeof(*inq_data),
|
|
|
|
/*byte2*/ 0,
|
|
|
|
/*page_code*/ 0,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) != CTL_SUCCESS) {
|
|
|
|
retval = 1;
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
} else if (path_str != NULL)
|
|
|
|
ctl_scsi_path_string(io, path_str, path_len);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_inquiry(int fd, int target, int lun, int iid, int retries)
|
|
|
|
{
|
|
|
|
struct scsi_inquiry_data *inq_data;
|
|
|
|
char scsi_path[40];
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
inq_data = malloc(sizeof(*inq_data));
|
|
|
|
if (inq_data == NULL) {
|
|
|
|
warnx("%s: can't allocate inquiry data", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((retval = cctl_get_inquiry(fd, target, lun, iid, retries, scsi_path,
|
|
|
|
sizeof(scsi_path), inq_data)) != 0)
|
|
|
|
goto bailout;
|
|
|
|
|
|
|
|
printf("%s", scsi_path);
|
|
|
|
scsi_print_inquiry(inq_data);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
if (inq_data != NULL)
|
|
|
|
free(inq_data);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_req_sense(int fd, int target, int lun, int iid, int retries)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct scsi_sense_data *sense_data;
|
|
|
|
struct ctl_id id;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
id.id = iid;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warnx("cctl_req_sense: can't allocate memory\n");
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
sense_data = malloc(sizeof(*sense_data));
|
|
|
|
memset(sense_data, 0, sizeof(*sense_data));
|
|
|
|
|
|
|
|
ctl_scsi_request_sense(/*io*/ io,
|
|
|
|
/*data_ptr*/ (uint8_t *)sense_data,
|
|
|
|
/*data_len*/ sizeof(*sense_data),
|
|
|
|
/*byte2*/ 0,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retries, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
bcopy(sense_data, &io->scsiio.sense_data, sizeof(*sense_data));
|
|
|
|
io->scsiio.sense_len = sizeof(*sense_data);
|
|
|
|
ctl_scsi_sense_print(&io->scsiio, NULL, stdout);
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
free(sense_data);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_report_target_port_group(int fd, int target, int lun, int initiator)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
uint32_t datalen;
|
|
|
|
uint8_t *dataptr;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
id.id = initiator;
|
|
|
|
dataptr = NULL;
|
|
|
|
retval = 0;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warn("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
datalen = 64;
|
|
|
|
dataptr = (uint8_t *)malloc(datalen);
|
|
|
|
if (dataptr == NULL) {
|
|
|
|
warn("%s: can't allocate %d bytes", __func__, datalen);
|
2014-10-22 09:17:17 +00:00
|
|
|
retval = 1;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(dataptr, 0, datalen);
|
|
|
|
|
|
|
|
ctl_scsi_maintenance_in(/*io*/ io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ datalen,
|
|
|
|
/*action*/ SA_RPRT_TRGT_GRP,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, 0, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
int returned_len, used_len;
|
|
|
|
|
|
|
|
returned_len = scsi_4btoul(&dataptr[0]) + 4;
|
|
|
|
|
|
|
|
for (used_len = 0; used_len < returned_len; used_len++) {
|
|
|
|
fprintf(stdout, "0x%02x ", dataptr[used_len]);
|
|
|
|
if (((used_len+1) % 8) == 0)
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
}
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
if (dataptr != NULL)
|
|
|
|
free(dataptr);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_inquiry_vpd_devid(int fd, int target, int lun, int initiator)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
uint32_t datalen;
|
|
|
|
uint8_t *dataptr;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
id.id = initiator;
|
|
|
|
retval = 0;
|
|
|
|
dataptr = NULL;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warn("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
datalen = 256;
|
|
|
|
dataptr = (uint8_t *)malloc(datalen);
|
|
|
|
if (dataptr == NULL) {
|
|
|
|
warn("%s: can't allocate %d bytes", __func__, datalen);
|
2014-10-22 09:17:17 +00:00
|
|
|
retval = 1;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(dataptr, 0, datalen);
|
|
|
|
|
|
|
|
ctl_scsi_inquiry(/*io*/ io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ datalen,
|
|
|
|
/*byte2*/ SI_EVPD,
|
|
|
|
/*page_code*/ SVPD_DEVICE_ID,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, 0, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
int returned_len, used_len;
|
|
|
|
|
|
|
|
returned_len = scsi_2btoul(&dataptr[2]) + 4;
|
|
|
|
|
|
|
|
for (used_len = 0; used_len < returned_len; used_len++) {
|
|
|
|
fprintf(stdout, "0x%02x ", dataptr[used_len]);
|
|
|
|
if (((used_len+1) % 8) == 0)
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
}
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
if (dataptr != NULL)
|
|
|
|
free(dataptr);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2014-10-22 09:17:17 +00:00
|
|
|
cctl_persistent_reserve_in(int fd, int target, int lun, int initiator,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
int argc, char **argv, char *combinedopt,
|
|
|
|
int retry_count)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
uint32_t datalen;
|
|
|
|
uint8_t *dataptr;
|
|
|
|
int action = -1;
|
|
|
|
int retval;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
id.id = initiator;
|
|
|
|
retval = 0;
|
|
|
|
dataptr = NULL;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warn("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'a':
|
|
|
|
action = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (action < 0 || action > 2) {
|
|
|
|
warn("action must be specified and in the range: 0-2");
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
datalen = 256;
|
|
|
|
dataptr = (uint8_t *)malloc(datalen);
|
|
|
|
if (dataptr == NULL) {
|
|
|
|
warn("%s: can't allocate %d bytes", __func__, datalen);
|
2014-10-22 09:17:17 +00:00
|
|
|
retval = 1;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(dataptr, 0, datalen);
|
|
|
|
|
|
|
|
ctl_scsi_persistent_res_in(io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ datalen,
|
|
|
|
/*action*/ action,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retry_count, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
int returned_len, used_len;
|
|
|
|
|
|
|
|
returned_len = 0;
|
|
|
|
|
|
|
|
switch (action) {
|
|
|
|
case 0:
|
|
|
|
returned_len = scsi_4btoul(&dataptr[4]) + 8;
|
|
|
|
returned_len = min(returned_len, 256);
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
returned_len = scsi_4btoul(&dataptr[4]) + 8;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
returned_len = 8;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("%s: invalid action %d", __func__, action);
|
|
|
|
goto bailout;
|
|
|
|
break; /* NOTREACHED */
|
|
|
|
}
|
|
|
|
|
|
|
|
for (used_len = 0; used_len < returned_len; used_len++) {
|
|
|
|
fprintf(stdout, "0x%02x ", dataptr[used_len]);
|
|
|
|
if (((used_len+1) % 8) == 0)
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
}
|
|
|
|
fprintf(stdout, "\n");
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
if (dataptr != NULL)
|
|
|
|
free(dataptr);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2014-10-22 09:17:17 +00:00
|
|
|
cctl_persistent_reserve_out(int fd, int target, int lun, int initiator,
|
|
|
|
int argc, char **argv, char *combinedopt,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
int retry_count)
|
|
|
|
{
|
|
|
|
union ctl_io *io;
|
|
|
|
struct ctl_id id;
|
|
|
|
uint32_t datalen;
|
|
|
|
uint64_t key = 0, sa_key = 0;
|
|
|
|
int action = -1, restype = -1;
|
|
|
|
uint8_t *dataptr;
|
|
|
|
int retval;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
id.id = initiator;
|
|
|
|
retval = 0;
|
|
|
|
dataptr = NULL;
|
|
|
|
|
|
|
|
io = ctl_scsi_alloc_io(id);
|
|
|
|
if (io == NULL) {
|
|
|
|
warn("%s: can't allocate memory", __func__);
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'a':
|
|
|
|
action = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'k':
|
|
|
|
key = strtoull(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'r':
|
|
|
|
restype = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 's':
|
|
|
|
sa_key = strtoull(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (action < 0 || action > 5) {
|
|
|
|
warn("action must be specified and in the range: 0-5");
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (restype < 0 || restype > 5) {
|
|
|
|
if (action != 0 && action != 5 && action != 3) {
|
|
|
|
warn("'restype' must specified and in the range: 0-5");
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
datalen = 24;
|
|
|
|
dataptr = (uint8_t *)malloc(datalen);
|
|
|
|
if (dataptr == NULL) {
|
|
|
|
warn("%s: can't allocate %d bytes", __func__, datalen);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
memset(dataptr, 0, datalen);
|
|
|
|
|
|
|
|
ctl_scsi_persistent_res_out(io,
|
|
|
|
/*data_ptr*/ dataptr,
|
|
|
|
/*data_len*/ datalen,
|
|
|
|
/*action*/ action,
|
|
|
|
/*type*/ restype,
|
|
|
|
/*key*/ key,
|
|
|
|
/*sa key*/ sa_key,
|
|
|
|
/*tag_type*/ CTL_TAG_SIMPLE,
|
|
|
|
/*control*/ 0);
|
|
|
|
|
|
|
|
io->io_hdr.nexus.targ_target.id = target;
|
|
|
|
io->io_hdr.nexus.targ_lun = lun;
|
|
|
|
io->io_hdr.nexus.initid = id;
|
|
|
|
|
|
|
|
if (cctl_do_io(fd, retry_count, io, __func__) != 0) {
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) {
|
|
|
|
char scsi_path[40];
|
|
|
|
ctl_scsi_path_string(io, scsi_path, sizeof(scsi_path));
|
|
|
|
fprintf( stdout, "%sPERSISTENT RESERVE OUT executed "
|
|
|
|
"successfully\n", scsi_path);
|
|
|
|
} else
|
|
|
|
ctl_io_error_print(io, NULL, stderr);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
ctl_scsi_free_io(io);
|
|
|
|
|
|
|
|
if (dataptr != NULL)
|
|
|
|
free(dataptr);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct cctl_req_option {
|
|
|
|
char *name;
|
|
|
|
int namelen;
|
|
|
|
char *value;
|
|
|
|
int vallen;
|
|
|
|
STAILQ_ENTRY(cctl_req_option) links;
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_create_lun(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_lun_req req;
|
|
|
|
int device_type = -1;
|
|
|
|
uint64_t lun_size = 0;
|
|
|
|
uint32_t blocksize = 0, req_lun_id = 0;
|
|
|
|
char *serial_num = NULL;
|
|
|
|
char *device_id = NULL;
|
|
|
|
int lun_size_set = 0, blocksize_set = 0, lun_id_set = 0;
|
|
|
|
char *backend_name = NULL;
|
|
|
|
STAILQ_HEAD(, cctl_req_option) option_list;
|
|
|
|
int num_options = 0;
|
|
|
|
int retval = 0, c;
|
|
|
|
|
|
|
|
STAILQ_INIT(&option_list);
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'b':
|
|
|
|
backend_name = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 'B':
|
|
|
|
blocksize = strtoul(optarg, NULL, 0);
|
|
|
|
blocksize_set = 1;
|
|
|
|
break;
|
|
|
|
case 'd':
|
|
|
|
device_id = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
req_lun_id = strtoul(optarg, NULL, 0);
|
|
|
|
lun_id_set = 1;
|
|
|
|
break;
|
|
|
|
case 'o': {
|
|
|
|
struct cctl_req_option *option;
|
|
|
|
char *tmpstr;
|
|
|
|
char *name, *value;
|
|
|
|
|
|
|
|
tmpstr = strdup(optarg);
|
|
|
|
name = strsep(&tmpstr, "=");
|
|
|
|
if (name == NULL) {
|
|
|
|
warnx("%s: option -o takes \"name=value\""
|
|
|
|
"argument", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
value = strsep(&tmpstr, "=");
|
|
|
|
if (value == NULL) {
|
|
|
|
warnx("%s: option -o takes \"name=value\""
|
|
|
|
"argument", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
option = malloc(sizeof(*option));
|
|
|
|
if (option == NULL) {
|
|
|
|
warn("%s: error allocating %zd bytes",
|
|
|
|
__func__, sizeof(*option));
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
option->name = strdup(name);
|
|
|
|
option->namelen = strlen(name) + 1;
|
|
|
|
option->value = strdup(value);
|
|
|
|
option->vallen = strlen(value) + 1;
|
|
|
|
free(tmpstr);
|
|
|
|
|
|
|
|
STAILQ_INSERT_TAIL(&option_list, option, links);
|
|
|
|
num_options++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case 's':
|
2012-03-06 13:43:57 +00:00
|
|
|
if (strcasecmp(optarg, "auto") != 0) {
|
|
|
|
retval = expand_number(optarg, &lun_size);
|
|
|
|
if (retval != 0) {
|
|
|
|
warn("%s: invalid -s argument",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
}
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
lun_size_set = 1;
|
|
|
|
break;
|
|
|
|
case 'S':
|
|
|
|
serial_num = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 't':
|
|
|
|
device_type = strtoul(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (backend_name == NULL) {
|
|
|
|
warnx("%s: backend name (-b) must be specified", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
bzero(&req, sizeof(req));
|
|
|
|
|
|
|
|
strlcpy(req.backend, backend_name, sizeof(req.backend));
|
|
|
|
req.reqtype = CTL_LUNREQ_CREATE;
|
|
|
|
|
|
|
|
if (blocksize_set != 0)
|
|
|
|
req.reqdata.create.blocksize_bytes = blocksize;
|
|
|
|
|
|
|
|
if (lun_size_set != 0)
|
|
|
|
req.reqdata.create.lun_size_bytes = lun_size;
|
|
|
|
|
|
|
|
if (lun_id_set != 0) {
|
|
|
|
req.reqdata.create.flags |= CTL_LUN_FLAG_ID_REQ;
|
|
|
|
req.reqdata.create.req_lun_id = req_lun_id;
|
|
|
|
}
|
|
|
|
|
|
|
|
req.reqdata.create.flags |= CTL_LUN_FLAG_DEV_TYPE;
|
|
|
|
|
|
|
|
if (device_type != -1)
|
|
|
|
req.reqdata.create.device_type = device_type;
|
|
|
|
else
|
|
|
|
req.reqdata.create.device_type = T_DIRECT;
|
|
|
|
|
|
|
|
if (serial_num != NULL) {
|
|
|
|
strlcpy(req.reqdata.create.serial_num, serial_num,
|
|
|
|
sizeof(req.reqdata.create.serial_num));
|
|
|
|
req.reqdata.create.flags |= CTL_LUN_FLAG_SERIAL_NUM;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (device_id != NULL) {
|
|
|
|
strlcpy(req.reqdata.create.device_id, device_id,
|
|
|
|
sizeof(req.reqdata.create.device_id));
|
|
|
|
req.reqdata.create.flags |= CTL_LUN_FLAG_DEVID;
|
|
|
|
}
|
|
|
|
|
|
|
|
req.num_be_args = num_options;
|
|
|
|
if (num_options > 0) {
|
|
|
|
struct cctl_req_option *option, *next_option;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
req.be_args = malloc(num_options * sizeof(*req.be_args));
|
|
|
|
if (req.be_args == NULL) {
|
|
|
|
warn("%s: error allocating %zd bytes", __func__,
|
|
|
|
num_options * sizeof(*req.be_args));
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0, option = STAILQ_FIRST(&option_list);
|
|
|
|
i < num_options; i++, option = next_option) {
|
|
|
|
next_option = STAILQ_NEXT(option, links);
|
|
|
|
|
|
|
|
req.be_args[i].namelen = option->namelen;
|
|
|
|
req.be_args[i].name = strdup(option->name);
|
|
|
|
req.be_args[i].vallen = option->vallen;
|
|
|
|
req.be_args[i].value = strdup(option->value);
|
|
|
|
/*
|
|
|
|
* XXX KDM do we want a way to specify a writeable
|
|
|
|
* flag of some sort? Do we want a way to specify
|
|
|
|
* binary data?
|
|
|
|
*/
|
|
|
|
req.be_args[i].flags = CTL_BEARG_ASCII | CTL_BEARG_RD;
|
|
|
|
|
|
|
|
STAILQ_REMOVE(&option_list, option, cctl_req_option,
|
|
|
|
links);
|
|
|
|
free(option->name);
|
|
|
|
free(option->value);
|
|
|
|
free(option);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_LUN_REQ, &req) == -1) {
|
|
|
|
warn("%s: error issuing CTL_LUN_REQ ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
2014-10-10 19:41:09 +00:00
|
|
|
switch (req.status) {
|
|
|
|
case CTL_LUN_ERROR:
|
|
|
|
warnx("LUN creation error: %s", req.error_str);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
2014-10-10 19:41:09 +00:00
|
|
|
case CTL_LUN_WARNING:
|
|
|
|
warnx("LUN creation warning: %s", req.error_str);
|
|
|
|
break;
|
|
|
|
case CTL_LUN_OK:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("unknown LUN creation status: %d", req.status);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
fprintf(stdout, "LUN created successfully\n");
|
|
|
|
fprintf(stdout, "backend: %s\n", req.backend);
|
|
|
|
fprintf(stdout, "device type: %d\n",req.reqdata.create.device_type);
|
|
|
|
fprintf(stdout, "LUN size: %ju bytes\n",
|
|
|
|
(uintmax_t)req.reqdata.create.lun_size_bytes);
|
|
|
|
fprintf(stdout, "blocksize %u bytes\n",
|
|
|
|
req.reqdata.create.blocksize_bytes);
|
|
|
|
fprintf(stdout, "LUN ID: %d\n", req.reqdata.create.req_lun_id);
|
|
|
|
fprintf(stdout, "Serial Number: %s\n", req.reqdata.create.serial_num);
|
|
|
|
fprintf(stdout, "Device ID; %s\n", req.reqdata.create.device_id);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_rm_lun(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_lun_req req;
|
|
|
|
uint32_t lun_id = 0;
|
|
|
|
int lun_id_set = 0;
|
|
|
|
char *backend_name = NULL;
|
|
|
|
STAILQ_HEAD(, cctl_req_option) option_list;
|
|
|
|
int num_options = 0;
|
|
|
|
int retval = 0, c;
|
|
|
|
|
|
|
|
STAILQ_INIT(&option_list);
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'b':
|
|
|
|
backend_name = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
lun_id = strtoul(optarg, NULL, 0);
|
|
|
|
lun_id_set = 1;
|
|
|
|
break;
|
|
|
|
case 'o': {
|
|
|
|
struct cctl_req_option *option;
|
|
|
|
char *tmpstr;
|
|
|
|
char *name, *value;
|
|
|
|
|
|
|
|
tmpstr = strdup(optarg);
|
|
|
|
name = strsep(&tmpstr, "=");
|
|
|
|
if (name == NULL) {
|
|
|
|
warnx("%s: option -o takes \"name=value\""
|
|
|
|
"argument", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
value = strsep(&tmpstr, "=");
|
|
|
|
if (value == NULL) {
|
|
|
|
warnx("%s: option -o takes \"name=value\""
|
|
|
|
"argument", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
option = malloc(sizeof(*option));
|
|
|
|
if (option == NULL) {
|
|
|
|
warn("%s: error allocating %zd bytes",
|
|
|
|
__func__, sizeof(*option));
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
option->name = strdup(name);
|
|
|
|
option->namelen = strlen(name) + 1;
|
|
|
|
option->value = strdup(value);
|
|
|
|
option->vallen = strlen(value) + 1;
|
|
|
|
free(tmpstr);
|
|
|
|
|
|
|
|
STAILQ_INSERT_TAIL(&option_list, option, links);
|
|
|
|
num_options++;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (backend_name == NULL)
|
|
|
|
errx(1, "%s: backend name (-b) must be specified", __func__);
|
|
|
|
|
|
|
|
if (lun_id_set == 0)
|
|
|
|
errx(1, "%s: LUN id (-l) must be specified", __func__);
|
|
|
|
|
|
|
|
bzero(&req, sizeof(req));
|
|
|
|
|
|
|
|
strlcpy(req.backend, backend_name, sizeof(req.backend));
|
|
|
|
req.reqtype = CTL_LUNREQ_RM;
|
|
|
|
|
|
|
|
req.reqdata.rm.lun_id = lun_id;
|
|
|
|
|
|
|
|
req.num_be_args = num_options;
|
|
|
|
if (num_options > 0) {
|
|
|
|
struct cctl_req_option *option, *next_option;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
req.be_args = malloc(num_options * sizeof(*req.be_args));
|
|
|
|
if (req.be_args == NULL) {
|
|
|
|
warn("%s: error allocating %zd bytes", __func__,
|
|
|
|
num_options * sizeof(*req.be_args));
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0, option = STAILQ_FIRST(&option_list);
|
|
|
|
i < num_options; i++, option = next_option) {
|
|
|
|
next_option = STAILQ_NEXT(option, links);
|
|
|
|
|
|
|
|
req.be_args[i].namelen = option->namelen;
|
|
|
|
req.be_args[i].name = strdup(option->name);
|
|
|
|
req.be_args[i].vallen = option->vallen;
|
|
|
|
req.be_args[i].value = strdup(option->value);
|
|
|
|
/*
|
|
|
|
* XXX KDM do we want a way to specify a writeable
|
|
|
|
* flag of some sort? Do we want a way to specify
|
|
|
|
* binary data?
|
|
|
|
*/
|
|
|
|
req.be_args[i].flags = CTL_BEARG_ASCII | CTL_BEARG_RD;
|
|
|
|
|
|
|
|
STAILQ_REMOVE(&option_list, option, cctl_req_option,
|
|
|
|
links);
|
|
|
|
free(option->name);
|
|
|
|
free(option->value);
|
|
|
|
free(option);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_LUN_REQ, &req) == -1) {
|
|
|
|
warn("%s: error issuing CTL_LUN_REQ ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
2014-10-10 19:41:09 +00:00
|
|
|
switch (req.status) {
|
|
|
|
case CTL_LUN_ERROR:
|
|
|
|
warnx("LUN removal error: %s", req.error_str);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
2014-10-10 19:41:09 +00:00
|
|
|
case CTL_LUN_WARNING:
|
|
|
|
warnx("LUN removal warning: %s", req.error_str);
|
|
|
|
break;
|
|
|
|
case CTL_LUN_OK:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("unknown LUN removal status: %d", req.status);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
2014-10-10 19:41:09 +00:00
|
|
|
printf("LUN %d removed successfully\n", lun_id);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
2012-03-06 13:43:57 +00:00
|
|
|
static int
|
|
|
|
cctl_modify_lun(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_lun_req req;
|
|
|
|
uint64_t lun_size = 0;
|
|
|
|
uint32_t lun_id = 0;
|
|
|
|
int lun_id_set = 0, lun_size_set = 0;
|
|
|
|
char *backend_name = NULL;
|
|
|
|
int retval = 0, c;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'b':
|
|
|
|
backend_name = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
lun_id = strtoul(optarg, NULL, 0);
|
|
|
|
lun_id_set = 1;
|
|
|
|
break;
|
|
|
|
case 's':
|
|
|
|
if (strcasecmp(optarg, "auto") != 0) {
|
|
|
|
retval = expand_number(optarg, &lun_size);
|
|
|
|
if (retval != 0) {
|
|
|
|
warn("%s: invalid -s argument",
|
|
|
|
__func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
lun_size_set = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (backend_name == NULL)
|
|
|
|
errx(1, "%s: backend name (-b) must be specified", __func__);
|
|
|
|
|
|
|
|
if (lun_id_set == 0)
|
|
|
|
errx(1, "%s: LUN id (-l) must be specified", __func__);
|
|
|
|
|
|
|
|
if (lun_size_set == 0)
|
|
|
|
errx(1, "%s: size (-s) must be specified", __func__);
|
|
|
|
|
|
|
|
bzero(&req, sizeof(req));
|
|
|
|
|
|
|
|
strlcpy(req.backend, backend_name, sizeof(req.backend));
|
|
|
|
req.reqtype = CTL_LUNREQ_MODIFY;
|
|
|
|
|
|
|
|
req.reqdata.modify.lun_id = lun_id;
|
|
|
|
req.reqdata.modify.lun_size_bytes = lun_size;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_LUN_REQ, &req) == -1) {
|
|
|
|
warn("%s: error issuing CTL_LUN_REQ ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
2014-10-10 19:41:09 +00:00
|
|
|
switch (req.status) {
|
|
|
|
case CTL_LUN_ERROR:
|
|
|
|
warnx("LUN modification error: %s", req.error_str);
|
2012-03-06 13:43:57 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
2014-10-10 19:41:09 +00:00
|
|
|
case CTL_LUN_WARNING:
|
|
|
|
warnx("LUN modification warning: %s", req.error_str);
|
|
|
|
break;
|
|
|
|
case CTL_LUN_OK:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
warnx("unknown LUN modification status: %d", req.status);
|
2012-03-06 13:43:57 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
printf("LUN %d modified successfully\n", lun_id);
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
2013-09-14 15:29:06 +00:00
|
|
|
struct cctl_islist_conn {
|
|
|
|
int connection_id;
|
|
|
|
char *initiator;
|
|
|
|
char *initiator_addr;
|
|
|
|
char *initiator_alias;
|
|
|
|
char *target;
|
|
|
|
char *target_alias;
|
|
|
|
char *header_digest;
|
|
|
|
char *data_digest;
|
|
|
|
char *max_data_segment_length;;
|
|
|
|
int immediate_data;
|
|
|
|
int iser;
|
|
|
|
STAILQ_ENTRY(cctl_islist_conn) links;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct cctl_islist_data {
|
|
|
|
int num_conns;
|
|
|
|
STAILQ_HEAD(,cctl_islist_conn) conn_list;
|
|
|
|
struct cctl_islist_conn *cur_conn;
|
|
|
|
int level;
|
|
|
|
struct sbuf *cur_sb[32];
|
|
|
|
};
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_islist_start_element(void *user_data, const char *name, const char **attr)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
struct cctl_islist_data *islist;
|
|
|
|
struct cctl_islist_conn *cur_conn;
|
|
|
|
|
|
|
|
islist = (struct cctl_islist_data *)user_data;
|
|
|
|
cur_conn = islist->cur_conn;
|
|
|
|
islist->level++;
|
2013-10-09 12:30:52 +00:00
|
|
|
if ((u_int)islist->level >= (sizeof(islist->cur_sb) /
|
2013-09-14 15:29:06 +00:00
|
|
|
sizeof(islist->cur_sb[0])))
|
|
|
|
errx(1, "%s: too many nesting levels, %zd max", __func__,
|
|
|
|
sizeof(islist->cur_sb) / sizeof(islist->cur_sb[0]));
|
|
|
|
|
|
|
|
islist->cur_sb[islist->level] = sbuf_new_auto();
|
|
|
|
if (islist->cur_sb[islist->level] == NULL)
|
|
|
|
err(1, "%s: Unable to allocate sbuf", __func__);
|
|
|
|
|
|
|
|
if (strcmp(name, "connection") == 0) {
|
|
|
|
if (cur_conn != NULL)
|
|
|
|
errx(1, "%s: improper connection element nesting",
|
|
|
|
__func__);
|
|
|
|
|
|
|
|
cur_conn = calloc(1, sizeof(*cur_conn));
|
|
|
|
if (cur_conn == NULL)
|
|
|
|
err(1, "%s: cannot allocate %zd bytes", __func__,
|
|
|
|
sizeof(*cur_conn));
|
|
|
|
|
|
|
|
islist->num_conns++;
|
|
|
|
islist->cur_conn = cur_conn;
|
|
|
|
|
|
|
|
STAILQ_INSERT_TAIL(&islist->conn_list, cur_conn, links);
|
|
|
|
|
|
|
|
for (i = 0; attr[i] != NULL; i += 2) {
|
|
|
|
if (strcmp(attr[i], "id") == 0) {
|
|
|
|
cur_conn->connection_id =
|
|
|
|
strtoull(attr[i+1], NULL, 0);
|
|
|
|
} else {
|
|
|
|
errx(1,
|
|
|
|
"%s: invalid connection attribute %s = %s",
|
|
|
|
__func__, attr[i], attr[i+1]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_islist_end_element(void *user_data, const char *name)
|
|
|
|
{
|
|
|
|
struct cctl_islist_data *islist;
|
|
|
|
struct cctl_islist_conn *cur_conn;
|
|
|
|
char *str;
|
|
|
|
|
|
|
|
islist = (struct cctl_islist_data *)user_data;
|
|
|
|
cur_conn = islist->cur_conn;
|
|
|
|
|
|
|
|
if ((cur_conn == NULL)
|
|
|
|
&& (strcmp(name, "ctlislist") != 0))
|
|
|
|
errx(1, "%s: cur_conn == NULL! (name = %s)", __func__, name);
|
|
|
|
|
|
|
|
if (islist->cur_sb[islist->level] == NULL)
|
|
|
|
errx(1, "%s: no valid sbuf at level %d (name %s)", __func__,
|
|
|
|
islist->level, name);
|
|
|
|
|
|
|
|
sbuf_finish(islist->cur_sb[islist->level]);
|
|
|
|
str = strdup(sbuf_data(islist->cur_sb[islist->level]));
|
|
|
|
if (str == NULL)
|
|
|
|
err(1, "%s can't allocate %zd bytes for string", __func__,
|
|
|
|
sbuf_len(islist->cur_sb[islist->level]));
|
|
|
|
|
|
|
|
sbuf_delete(islist->cur_sb[islist->level]);
|
|
|
|
islist->cur_sb[islist->level] = NULL;
|
|
|
|
islist->level--;
|
|
|
|
|
|
|
|
if (strcmp(name, "initiator") == 0) {
|
|
|
|
cur_conn->initiator = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "initiator_addr") == 0) {
|
|
|
|
cur_conn->initiator_addr = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "initiator_alias") == 0) {
|
|
|
|
cur_conn->initiator_alias = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "target") == 0) {
|
|
|
|
cur_conn->target = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "target_alias") == 0) {
|
|
|
|
cur_conn->target_alias = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "header_digest") == 0) {
|
|
|
|
cur_conn->header_digest = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "data_digest") == 0) {
|
|
|
|
cur_conn->data_digest = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "max_data_segment_length") == 0) {
|
|
|
|
cur_conn->max_data_segment_length = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "immediate_data") == 0) {
|
|
|
|
cur_conn->immediate_data = atoi(str);
|
|
|
|
} else if (strcmp(name, "iser") == 0) {
|
|
|
|
cur_conn->iser = atoi(str);
|
|
|
|
} else if (strcmp(name, "connection") == 0) {
|
|
|
|
islist->cur_conn = NULL;
|
|
|
|
} else if (strcmp(name, "ctlislist") == 0) {
|
|
|
|
} else
|
|
|
|
errx(1, "unknown element %s", name);
|
|
|
|
|
|
|
|
free(str);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_islist_char_handler(void *user_data, const XML_Char *str, int len)
|
|
|
|
{
|
|
|
|
struct cctl_islist_data *islist;
|
|
|
|
|
|
|
|
islist = (struct cctl_islist_data *)user_data;
|
|
|
|
|
|
|
|
sbuf_bcat(islist->cur_sb[islist->level], str, len);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_islist(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_iscsi req;
|
|
|
|
struct cctl_islist_data islist;
|
|
|
|
struct cctl_islist_conn *conn;
|
|
|
|
XML_Parser parser;
|
|
|
|
char *conn_str;
|
|
|
|
int conn_len;
|
|
|
|
int dump_xml = 0;
|
|
|
|
int c, retval, verbose = 0;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
conn_len = 4096;
|
|
|
|
|
|
|
|
bzero(&islist, sizeof(islist));
|
|
|
|
STAILQ_INIT(&islist.conn_list);
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'v':
|
|
|
|
verbose = 1;
|
|
|
|
break;
|
|
|
|
case 'x':
|
|
|
|
dump_xml = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
retry:
|
|
|
|
conn_str = malloc(conn_len);
|
|
|
|
|
|
|
|
bzero(&req, sizeof(req));
|
|
|
|
req.type = CTL_ISCSI_LIST;
|
|
|
|
req.data.list.alloc_len = conn_len;
|
|
|
|
req.data.list.conn_xml = conn_str;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_ISCSI, &req) == -1) {
|
|
|
|
warn("%s: error issuing CTL_ISCSI ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (req.status == CTL_ISCSI_ERROR) {
|
|
|
|
warnx("%s: error returned from CTL_ISCSI ioctl:\n%s",
|
|
|
|
__func__, req.error_str);
|
|
|
|
} else if (req.status == CTL_ISCSI_LIST_NEED_MORE_SPACE) {
|
|
|
|
conn_len = conn_len << 1;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dump_xml != 0) {
|
|
|
|
printf("%s", conn_str);
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
parser = XML_ParserCreate(NULL);
|
|
|
|
if (parser == NULL) {
|
|
|
|
warn("%s: Unable to create XML parser", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
XML_SetUserData(parser, &islist);
|
|
|
|
XML_SetElementHandler(parser, cctl_islist_start_element,
|
|
|
|
cctl_islist_end_element);
|
|
|
|
XML_SetCharacterDataHandler(parser, cctl_islist_char_handler);
|
|
|
|
|
|
|
|
retval = XML_Parse(parser, conn_str, strlen(conn_str), 1);
|
|
|
|
if (retval != 1) {
|
2014-12-20 16:13:31 +00:00
|
|
|
warnx("%s: Unable to parse XML: Error %d", __func__,
|
|
|
|
XML_GetErrorCode(parser));
|
|
|
|
XML_ParserFree(parser);
|
2013-09-14 15:29:06 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
2014-12-20 16:13:31 +00:00
|
|
|
XML_ParserFree(parser);
|
2013-09-14 15:29:06 +00:00
|
|
|
|
|
|
|
if (verbose != 0) {
|
|
|
|
STAILQ_FOREACH(conn, &islist.conn_list, links) {
|
2013-10-30 11:38:46 +00:00
|
|
|
printf("Session ID: %d\n", conn->connection_id);
|
|
|
|
printf("Initiator name: %s\n", conn->initiator);
|
|
|
|
printf("Initiator portal: %s\n", conn->initiator_addr);
|
|
|
|
printf("Initiator alias: %s\n", conn->initiator_alias);
|
|
|
|
printf("Target name: %s\n", conn->target);
|
|
|
|
printf("Target alias: %s\n", conn->target_alias);
|
|
|
|
printf("Header digest: %s\n", conn->header_digest);
|
|
|
|
printf("Data digest: %s\n", conn->data_digest);
|
|
|
|
printf("DataSegmentLen: %s\n", conn->max_data_segment_length);
|
|
|
|
printf("ImmediateData: %s\n", conn->immediate_data ? "Yes" : "No");
|
|
|
|
printf("iSER (RDMA): %s\n", conn->iser ? "Yes" : "No");
|
2013-09-14 15:29:06 +00:00
|
|
|
printf("\n");
|
|
|
|
}
|
|
|
|
} else {
|
2013-10-30 11:38:46 +00:00
|
|
|
printf("%4s %-16s %-36s %-36s\n", "ID", "Portal", "Initiator name",
|
2013-09-14 15:29:06 +00:00
|
|
|
"Target name");
|
|
|
|
STAILQ_FOREACH(conn, &islist.conn_list, links) {
|
|
|
|
printf("%4u %-16s %-36s %-36s\n",
|
|
|
|
conn->connection_id, conn->initiator_addr, conn->initiator,
|
|
|
|
conn->target);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
free(conn_str);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_islogout(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_iscsi req;
|
|
|
|
int retval = 0, c;
|
|
|
|
int all = 0, connection_id = -1, nargs = 0;
|
|
|
|
char *initiator_name = NULL, *initiator_addr = NULL;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'a':
|
|
|
|
all = 1;
|
|
|
|
nargs++;
|
|
|
|
break;
|
|
|
|
case 'c':
|
|
|
|
connection_id = strtoul(optarg, NULL, 0);
|
|
|
|
nargs++;
|
|
|
|
break;
|
|
|
|
case 'i':
|
|
|
|
initiator_name = strdup(optarg);
|
|
|
|
if (initiator_name == NULL)
|
|
|
|
err(1, "%s: strdup", __func__);
|
|
|
|
nargs++;
|
|
|
|
break;
|
2013-10-30 11:38:46 +00:00
|
|
|
case 'p':
|
|
|
|
initiator_addr = strdup(optarg);
|
|
|
|
if (initiator_addr == NULL)
|
|
|
|
err(1, "%s: strdup", __func__);
|
|
|
|
nargs++;
|
|
|
|
break;
|
2013-09-14 15:29:06 +00:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (nargs == 0)
|
2013-10-30 11:38:46 +00:00
|
|
|
errx(1, "%s: either -a, -c, -i, or -p must be specified",
|
2013-09-14 15:29:06 +00:00
|
|
|
__func__);
|
|
|
|
if (nargs > 1)
|
2013-10-30 11:38:46 +00:00
|
|
|
errx(1, "%s: only one of -a, -c, -i, or -p may be specified",
|
2013-09-14 15:29:06 +00:00
|
|
|
__func__);
|
|
|
|
|
|
|
|
bzero(&req, sizeof(req));
|
|
|
|
req.type = CTL_ISCSI_LOGOUT;
|
|
|
|
req.data.logout.connection_id = connection_id;
|
|
|
|
if (initiator_addr != NULL)
|
|
|
|
strlcpy(req.data.logout.initiator_addr,
|
|
|
|
initiator_addr, sizeof(req.data.logout.initiator_addr));
|
|
|
|
if (initiator_name != NULL)
|
|
|
|
strlcpy(req.data.logout.initiator_name,
|
|
|
|
initiator_name, sizeof(req.data.logout.initiator_name));
|
|
|
|
if (all != 0)
|
|
|
|
req.data.logout.all = 1;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_ISCSI, &req) == -1) {
|
|
|
|
warn("%s: error issuing CTL_ISCSI ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (req.status != CTL_ISCSI_OK) {
|
|
|
|
warnx("%s: error returned from CTL iSCSI logout request:\n%s",
|
|
|
|
__func__, req.error_str);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
printf("iSCSI logout requests submitted\n");
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_isterminate(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_iscsi req;
|
|
|
|
int retval = 0, c;
|
|
|
|
int all = 0, connection_id = -1, nargs = 0;
|
|
|
|
char *initiator_name = NULL, *initiator_addr = NULL;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'a':
|
|
|
|
all = 1;
|
|
|
|
nargs++;
|
|
|
|
break;
|
|
|
|
case 'c':
|
|
|
|
connection_id = strtoul(optarg, NULL, 0);
|
|
|
|
nargs++;
|
|
|
|
break;
|
|
|
|
case 'i':
|
|
|
|
initiator_name = strdup(optarg);
|
|
|
|
if (initiator_name == NULL)
|
|
|
|
err(1, "%s: strdup", __func__);
|
|
|
|
nargs++;
|
|
|
|
break;
|
2013-10-30 11:38:46 +00:00
|
|
|
case 'p':
|
|
|
|
initiator_addr = strdup(optarg);
|
|
|
|
if (initiator_addr == NULL)
|
|
|
|
err(1, "%s: strdup", __func__);
|
|
|
|
nargs++;
|
|
|
|
break;
|
2013-09-14 15:29:06 +00:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (nargs == 0)
|
2013-10-30 11:38:46 +00:00
|
|
|
errx(1, "%s: either -a, -c, -i, or -p must be specified",
|
2013-09-14 15:29:06 +00:00
|
|
|
__func__);
|
|
|
|
if (nargs > 1)
|
2013-10-30 11:38:46 +00:00
|
|
|
errx(1, "%s: only one of -a, -c, -i, or -p may be specified",
|
2013-09-14 15:29:06 +00:00
|
|
|
__func__);
|
|
|
|
|
|
|
|
bzero(&req, sizeof(req));
|
|
|
|
req.type = CTL_ISCSI_TERMINATE;
|
|
|
|
req.data.terminate.connection_id = connection_id;
|
|
|
|
if (initiator_addr != NULL)
|
|
|
|
strlcpy(req.data.terminate.initiator_addr,
|
|
|
|
initiator_addr, sizeof(req.data.terminate.initiator_addr));
|
|
|
|
if (initiator_name != NULL)
|
|
|
|
strlcpy(req.data.terminate.initiator_name,
|
|
|
|
initiator_name, sizeof(req.data.terminate.initiator_name));
|
|
|
|
if (all != 0)
|
|
|
|
req.data.terminate.all = 1;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_ISCSI, &req) == -1) {
|
|
|
|
warn("%s: error issuing CTL_ISCSI ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (req.status != CTL_ISCSI_OK) {
|
|
|
|
warnx("%s: error returned from CTL iSCSI connection "
|
|
|
|
"termination request:\n%s", __func__, req.error_str);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
printf("iSCSI connections terminated\n");
|
|
|
|
|
|
|
|
bailout:
|
|
|
|
return (retval);
|
|
|
|
}
|
2012-03-06 13:43:57 +00:00
|
|
|
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
/*
|
|
|
|
* Name/value pair used for per-LUN attributes.
|
|
|
|
*/
|
|
|
|
struct cctl_lun_nv {
|
|
|
|
char *name;
|
|
|
|
char *value;
|
|
|
|
STAILQ_ENTRY(cctl_lun_nv) links;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
2014-10-22 09:17:17 +00:00
|
|
|
* Backend LUN information.
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
*/
|
|
|
|
struct cctl_lun {
|
|
|
|
uint64_t lun_id;
|
|
|
|
char *backend_type;
|
|
|
|
uint64_t size_blocks;
|
|
|
|
uint32_t blocksize;
|
|
|
|
char *serial_number;
|
|
|
|
char *device_id;
|
|
|
|
STAILQ_HEAD(,cctl_lun_nv) attr_list;
|
|
|
|
STAILQ_ENTRY(cctl_lun) links;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct cctl_devlist_data {
|
|
|
|
int num_luns;
|
|
|
|
STAILQ_HEAD(,cctl_lun) lun_list;
|
|
|
|
struct cctl_lun *cur_lun;
|
|
|
|
int level;
|
|
|
|
struct sbuf *cur_sb[32];
|
|
|
|
};
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_start_element(void *user_data, const char *name, const char **attr)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
struct cctl_devlist_data *devlist;
|
|
|
|
struct cctl_lun *cur_lun;
|
|
|
|
|
|
|
|
devlist = (struct cctl_devlist_data *)user_data;
|
|
|
|
cur_lun = devlist->cur_lun;
|
|
|
|
devlist->level++;
|
2013-10-09 12:30:52 +00:00
|
|
|
if ((u_int)devlist->level >= (sizeof(devlist->cur_sb) /
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
sizeof(devlist->cur_sb[0])))
|
|
|
|
errx(1, "%s: too many nesting levels, %zd max", __func__,
|
|
|
|
sizeof(devlist->cur_sb) / sizeof(devlist->cur_sb[0]));
|
|
|
|
|
|
|
|
devlist->cur_sb[devlist->level] = sbuf_new_auto();
|
|
|
|
if (devlist->cur_sb[devlist->level] == NULL)
|
|
|
|
err(1, "%s: Unable to allocate sbuf", __func__);
|
|
|
|
|
|
|
|
if (strcmp(name, "lun") == 0) {
|
|
|
|
if (cur_lun != NULL)
|
|
|
|
errx(1, "%s: improper lun element nesting", __func__);
|
|
|
|
|
|
|
|
cur_lun = calloc(1, sizeof(*cur_lun));
|
|
|
|
if (cur_lun == NULL)
|
|
|
|
err(1, "%s: cannot allocate %zd bytes", __func__,
|
|
|
|
sizeof(*cur_lun));
|
|
|
|
|
|
|
|
devlist->num_luns++;
|
|
|
|
devlist->cur_lun = cur_lun;
|
|
|
|
|
|
|
|
STAILQ_INIT(&cur_lun->attr_list);
|
|
|
|
STAILQ_INSERT_TAIL(&devlist->lun_list, cur_lun, links);
|
|
|
|
|
|
|
|
for (i = 0; attr[i] != NULL; i += 2) {
|
|
|
|
if (strcmp(attr[i], "id") == 0) {
|
|
|
|
cur_lun->lun_id = strtoull(attr[i+1], NULL, 0);
|
|
|
|
} else {
|
|
|
|
errx(1, "%s: invalid LUN attribute %s = %s",
|
|
|
|
__func__, attr[i], attr[i+1]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_end_element(void *user_data, const char *name)
|
|
|
|
{
|
|
|
|
struct cctl_devlist_data *devlist;
|
|
|
|
struct cctl_lun *cur_lun;
|
|
|
|
char *str;
|
|
|
|
|
|
|
|
devlist = (struct cctl_devlist_data *)user_data;
|
|
|
|
cur_lun = devlist->cur_lun;
|
|
|
|
|
|
|
|
if ((cur_lun == NULL)
|
|
|
|
&& (strcmp(name, "ctllunlist") != 0))
|
|
|
|
errx(1, "%s: cur_lun == NULL! (name = %s)", __func__, name);
|
|
|
|
|
|
|
|
if (devlist->cur_sb[devlist->level] == NULL)
|
|
|
|
errx(1, "%s: no valid sbuf at level %d (name %s)", __func__,
|
|
|
|
devlist->level, name);
|
|
|
|
|
2013-05-10 09:58:32 +00:00
|
|
|
if (sbuf_finish(devlist->cur_sb[devlist->level]) != 0)
|
|
|
|
err(1, "%s: sbuf_finish", __func__);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
str = strdup(sbuf_data(devlist->cur_sb[devlist->level]));
|
|
|
|
if (str == NULL)
|
|
|
|
err(1, "%s can't allocate %zd bytes for string", __func__,
|
|
|
|
sbuf_len(devlist->cur_sb[devlist->level]));
|
|
|
|
|
|
|
|
if (strlen(str) == 0) {
|
|
|
|
free(str);
|
|
|
|
str = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
sbuf_delete(devlist->cur_sb[devlist->level]);
|
|
|
|
devlist->cur_sb[devlist->level] = NULL;
|
|
|
|
devlist->level--;
|
|
|
|
|
|
|
|
if (strcmp(name, "backend_type") == 0) {
|
|
|
|
cur_lun->backend_type = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "size") == 0) {
|
|
|
|
cur_lun->size_blocks = strtoull(str, NULL, 0);
|
|
|
|
} else if (strcmp(name, "blocksize") == 0) {
|
|
|
|
cur_lun->blocksize = strtoul(str, NULL, 0);
|
|
|
|
} else if (strcmp(name, "serial_number") == 0) {
|
|
|
|
cur_lun->serial_number = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "device_id") == 0) {
|
|
|
|
cur_lun->device_id = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "lun") == 0) {
|
|
|
|
devlist->cur_lun = NULL;
|
|
|
|
} else if (strcmp(name, "ctllunlist") == 0) {
|
2014-10-22 09:17:17 +00:00
|
|
|
/* Nothing. */
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
} else {
|
|
|
|
struct cctl_lun_nv *nv;
|
|
|
|
|
|
|
|
nv = calloc(1, sizeof(*nv));
|
|
|
|
if (nv == NULL)
|
|
|
|
err(1, "%s: can't allocate %zd bytes for nv pair",
|
|
|
|
__func__, sizeof(*nv));
|
|
|
|
|
|
|
|
nv->name = strdup(name);
|
|
|
|
if (nv->name == NULL)
|
|
|
|
err(1, "%s: can't allocated %zd bytes for string",
|
|
|
|
__func__, strlen(name));
|
|
|
|
|
|
|
|
nv->value = str;
|
|
|
|
str = NULL;
|
|
|
|
STAILQ_INSERT_TAIL(&cur_lun->attr_list, nv, links);
|
|
|
|
}
|
|
|
|
|
|
|
|
free(str);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_char_handler(void *user_data, const XML_Char *str, int len)
|
|
|
|
{
|
|
|
|
struct cctl_devlist_data *devlist;
|
|
|
|
|
|
|
|
devlist = (struct cctl_devlist_data *)user_data;
|
|
|
|
|
|
|
|
sbuf_bcat(devlist->cur_sb[devlist->level], str, len);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_devlist(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_lun_list list;
|
|
|
|
struct cctl_devlist_data devlist;
|
|
|
|
struct cctl_lun *lun;
|
|
|
|
XML_Parser parser;
|
|
|
|
char *lun_str;
|
|
|
|
int lun_len;
|
|
|
|
int dump_xml = 0;
|
|
|
|
int retval, c;
|
|
|
|
char *backend = NULL;
|
|
|
|
int verbose = 0;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
lun_len = 4096;
|
|
|
|
|
|
|
|
bzero(&devlist, sizeof(devlist));
|
|
|
|
STAILQ_INIT(&devlist.lun_list);
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'b':
|
|
|
|
backend = strdup(optarg);
|
|
|
|
break;
|
|
|
|
case 'v':
|
|
|
|
verbose++;
|
|
|
|
break;
|
|
|
|
case 'x':
|
|
|
|
dump_xml = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
retry:
|
|
|
|
lun_str = malloc(lun_len);
|
|
|
|
|
|
|
|
bzero(&list, sizeof(list));
|
|
|
|
list.alloc_len = lun_len;
|
|
|
|
list.status = CTL_LUN_LIST_NONE;
|
|
|
|
list.lun_xml = lun_str;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_LUN_LIST, &list) == -1) {
|
|
|
|
warn("%s: error issuing CTL_LUN_LIST ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (list.status == CTL_LUN_LIST_ERROR) {
|
|
|
|
warnx("%s: error returned from CTL_LUN_LIST ioctl:\n%s",
|
|
|
|
__func__, list.error_str);
|
|
|
|
} else if (list.status == CTL_LUN_LIST_NEED_MORE_SPACE) {
|
|
|
|
lun_len = lun_len << 1;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dump_xml != 0) {
|
|
|
|
printf("%s", lun_str);
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
parser = XML_ParserCreate(NULL);
|
|
|
|
if (parser == NULL) {
|
|
|
|
warn("%s: Unable to create XML parser", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
XML_SetUserData(parser, &devlist);
|
|
|
|
XML_SetElementHandler(parser, cctl_start_element, cctl_end_element);
|
|
|
|
XML_SetCharacterDataHandler(parser, cctl_char_handler);
|
|
|
|
|
|
|
|
retval = XML_Parse(parser, lun_str, strlen(lun_str), 1);
|
|
|
|
if (retval != 1) {
|
2014-12-20 16:13:31 +00:00
|
|
|
warnx("%s: Unable to parse XML: Error %d", __func__,
|
|
|
|
XML_GetErrorCode(parser));
|
|
|
|
XML_ParserFree(parser);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
2014-12-20 16:13:31 +00:00
|
|
|
XML_ParserFree(parser);
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
|
|
|
|
printf("LUN Backend %18s %4s %-16s %-16s\n", "Size (Blocks)", "BS",
|
|
|
|
"Serial Number", "Device ID");
|
|
|
|
STAILQ_FOREACH(lun, &devlist.lun_list, links) {
|
|
|
|
struct cctl_lun_nv *nv;
|
|
|
|
|
|
|
|
if ((backend != NULL)
|
|
|
|
&& (strcmp(lun->backend_type, backend) != 0))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
printf("%3ju %-8s %18ju %4u %-16s %-16s\n",
|
|
|
|
(uintmax_t)lun->lun_id,
|
|
|
|
lun->backend_type, (uintmax_t)lun->size_blocks,
|
|
|
|
lun->blocksize, lun->serial_number, lun->device_id);
|
|
|
|
|
|
|
|
if (verbose == 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
STAILQ_FOREACH(nv, &lun->attr_list, links) {
|
|
|
|
printf(" %s=%s\n", nv->name, nv->value);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
free(lun_str);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
2014-07-05 05:44:26 +00:00
|
|
|
/*
|
|
|
|
* Port information.
|
|
|
|
*/
|
|
|
|
struct cctl_port {
|
|
|
|
uint64_t port_id;
|
|
|
|
char *online;
|
|
|
|
char *frontend_type;
|
|
|
|
char *name;
|
|
|
|
int pp, vp;
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
char *target, *port, *lun_map;
|
2014-10-12 06:55:34 +00:00
|
|
|
STAILQ_HEAD(,cctl_lun_nv) init_list;
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
STAILQ_HEAD(,cctl_lun_nv) lun_list;
|
2014-07-05 05:44:26 +00:00
|
|
|
STAILQ_HEAD(,cctl_lun_nv) attr_list;
|
|
|
|
STAILQ_ENTRY(cctl_port) links;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct cctl_portlist_data {
|
|
|
|
int num_ports;
|
|
|
|
STAILQ_HEAD(,cctl_port) port_list;
|
|
|
|
struct cctl_port *cur_port;
|
|
|
|
int level;
|
2014-12-20 16:39:56 +00:00
|
|
|
uint64_t cur_id;
|
2014-07-05 05:44:26 +00:00
|
|
|
struct sbuf *cur_sb[32];
|
|
|
|
};
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_start_pelement(void *user_data, const char *name, const char **attr)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
struct cctl_portlist_data *portlist;
|
|
|
|
struct cctl_port *cur_port;
|
|
|
|
|
|
|
|
portlist = (struct cctl_portlist_data *)user_data;
|
|
|
|
cur_port = portlist->cur_port;
|
|
|
|
portlist->level++;
|
|
|
|
if ((u_int)portlist->level >= (sizeof(portlist->cur_sb) /
|
|
|
|
sizeof(portlist->cur_sb[0])))
|
|
|
|
errx(1, "%s: too many nesting levels, %zd max", __func__,
|
|
|
|
sizeof(portlist->cur_sb) / sizeof(portlist->cur_sb[0]));
|
|
|
|
|
|
|
|
portlist->cur_sb[portlist->level] = sbuf_new_auto();
|
|
|
|
if (portlist->cur_sb[portlist->level] == NULL)
|
|
|
|
err(1, "%s: Unable to allocate sbuf", __func__);
|
|
|
|
|
2014-12-20 16:39:56 +00:00
|
|
|
portlist->cur_id = 0;
|
|
|
|
for (i = 0; attr[i] != NULL; i += 2) {
|
|
|
|
if (strcmp(attr[i], "id") == 0) {
|
|
|
|
portlist->cur_id = strtoull(attr[i+1], NULL, 0);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-07-05 05:44:26 +00:00
|
|
|
if (strcmp(name, "targ_port") == 0) {
|
|
|
|
if (cur_port != NULL)
|
|
|
|
errx(1, "%s: improper port element nesting", __func__);
|
|
|
|
|
|
|
|
cur_port = calloc(1, sizeof(*cur_port));
|
|
|
|
if (cur_port == NULL)
|
|
|
|
err(1, "%s: cannot allocate %zd bytes", __func__,
|
|
|
|
sizeof(*cur_port));
|
|
|
|
|
|
|
|
portlist->num_ports++;
|
|
|
|
portlist->cur_port = cur_port;
|
|
|
|
|
2014-10-12 06:55:34 +00:00
|
|
|
STAILQ_INIT(&cur_port->init_list);
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
STAILQ_INIT(&cur_port->lun_list);
|
2014-07-05 05:44:26 +00:00
|
|
|
STAILQ_INIT(&cur_port->attr_list);
|
2014-12-20 16:39:56 +00:00
|
|
|
cur_port->port_id = portlist->cur_id;
|
2014-07-05 05:44:26 +00:00
|
|
|
STAILQ_INSERT_TAIL(&portlist->port_list, cur_port, links);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_end_pelement(void *user_data, const char *name)
|
|
|
|
{
|
|
|
|
struct cctl_portlist_data *portlist;
|
|
|
|
struct cctl_port *cur_port;
|
|
|
|
char *str;
|
|
|
|
|
|
|
|
portlist = (struct cctl_portlist_data *)user_data;
|
|
|
|
cur_port = portlist->cur_port;
|
|
|
|
|
|
|
|
if ((cur_port == NULL)
|
|
|
|
&& (strcmp(name, "ctlportlist") != 0))
|
|
|
|
errx(1, "%s: cur_port == NULL! (name = %s)", __func__, name);
|
|
|
|
|
|
|
|
if (portlist->cur_sb[portlist->level] == NULL)
|
|
|
|
errx(1, "%s: no valid sbuf at level %d (name %s)", __func__,
|
|
|
|
portlist->level, name);
|
|
|
|
|
|
|
|
if (sbuf_finish(portlist->cur_sb[portlist->level]) != 0)
|
|
|
|
err(1, "%s: sbuf_finish", __func__);
|
|
|
|
str = strdup(sbuf_data(portlist->cur_sb[portlist->level]));
|
|
|
|
if (str == NULL)
|
|
|
|
err(1, "%s can't allocate %zd bytes for string", __func__,
|
|
|
|
sbuf_len(portlist->cur_sb[portlist->level]));
|
|
|
|
|
|
|
|
if (strlen(str) == 0) {
|
|
|
|
free(str);
|
|
|
|
str = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
sbuf_delete(portlist->cur_sb[portlist->level]);
|
|
|
|
portlist->cur_sb[portlist->level] = NULL;
|
|
|
|
portlist->level--;
|
|
|
|
|
|
|
|
if (strcmp(name, "frontend_type") == 0) {
|
|
|
|
cur_port->frontend_type = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "port_name") == 0) {
|
|
|
|
cur_port->name = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "online") == 0) {
|
|
|
|
cur_port->online = str;
|
|
|
|
str = NULL;
|
|
|
|
} else if (strcmp(name, "physical_port") == 0) {
|
|
|
|
cur_port->pp = strtoull(str, NULL, 0);
|
|
|
|
} else if (strcmp(name, "virtual_port") == 0) {
|
2014-07-05 15:32:25 +00:00
|
|
|
cur_port->vp = strtoull(str, NULL, 0);
|
2014-10-12 06:55:34 +00:00
|
|
|
} else if (strcmp(name, "target") == 0) {
|
|
|
|
cur_port->target = str;
|
2014-07-05 05:44:26 +00:00
|
|
|
str = NULL;
|
2014-10-12 06:55:34 +00:00
|
|
|
} else if (strcmp(name, "port") == 0) {
|
|
|
|
cur_port->port = str;
|
2014-07-05 05:44:26 +00:00
|
|
|
str = NULL;
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
} else if (strcmp(name, "lun_map") == 0) {
|
|
|
|
cur_port->lun_map = str;
|
|
|
|
str = NULL;
|
2014-07-05 05:44:26 +00:00
|
|
|
} else if (strcmp(name, "targ_port") == 0) {
|
|
|
|
portlist->cur_port = NULL;
|
|
|
|
} else if (strcmp(name, "ctlportlist") == 0) {
|
2014-10-22 09:17:17 +00:00
|
|
|
/* Nothing. */
|
2014-07-05 05:44:26 +00:00
|
|
|
} else {
|
|
|
|
struct cctl_lun_nv *nv;
|
|
|
|
|
|
|
|
nv = calloc(1, sizeof(*nv));
|
|
|
|
if (nv == NULL)
|
|
|
|
err(1, "%s: can't allocate %zd bytes for nv pair",
|
|
|
|
__func__, sizeof(*nv));
|
|
|
|
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
if (strcmp(name, "initiator") == 0 ||
|
|
|
|
strcmp(name, "lun") == 0)
|
2014-12-20 16:39:56 +00:00
|
|
|
asprintf(&nv->name, "%ju", portlist->cur_id);
|
|
|
|
else
|
|
|
|
nv->name = strdup(name);
|
2014-07-05 05:44:26 +00:00
|
|
|
if (nv->name == NULL)
|
|
|
|
err(1, "%s: can't allocated %zd bytes for string",
|
|
|
|
__func__, strlen(name));
|
|
|
|
|
|
|
|
nv->value = str;
|
|
|
|
str = NULL;
|
2014-10-12 06:55:34 +00:00
|
|
|
if (strcmp(name, "initiator") == 0)
|
|
|
|
STAILQ_INSERT_TAIL(&cur_port->init_list, nv, links);
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
else if (strcmp(name, "lun") == 0)
|
|
|
|
STAILQ_INSERT_TAIL(&cur_port->lun_list, nv, links);
|
2014-10-12 06:55:34 +00:00
|
|
|
else
|
|
|
|
STAILQ_INSERT_TAIL(&cur_port->attr_list, nv, links);
|
2014-07-05 05:44:26 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
free(str);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
cctl_char_phandler(void *user_data, const XML_Char *str, int len)
|
|
|
|
{
|
|
|
|
struct cctl_portlist_data *portlist;
|
|
|
|
|
|
|
|
portlist = (struct cctl_portlist_data *)user_data;
|
|
|
|
|
|
|
|
sbuf_bcat(portlist->cur_sb[portlist->level], str, len);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
cctl_portlist(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_lun_list list;
|
|
|
|
struct cctl_portlist_data portlist;
|
|
|
|
struct cctl_port *port;
|
|
|
|
XML_Parser parser;
|
|
|
|
char *port_str;
|
|
|
|
int port_len;
|
|
|
|
int dump_xml = 0;
|
|
|
|
int retval, c;
|
|
|
|
char *frontend = NULL;
|
2014-10-12 06:55:34 +00:00
|
|
|
uint64_t portarg = UINT64_MAX;
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
int verbose = 0, init = 0, lun = 0, quiet = 0;
|
2014-07-05 05:44:26 +00:00
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
port_len = 4096;
|
|
|
|
|
|
|
|
bzero(&portlist, sizeof(portlist));
|
|
|
|
STAILQ_INIT(&portlist.port_list);
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'f':
|
|
|
|
frontend = strdup(optarg);
|
|
|
|
break;
|
2014-10-12 06:55:34 +00:00
|
|
|
case 'i':
|
|
|
|
init++;
|
|
|
|
break;
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
case 'l':
|
|
|
|
lun++;
|
|
|
|
break;
|
2014-10-12 06:55:34 +00:00
|
|
|
case 'p':
|
|
|
|
portarg = strtoll(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'q':
|
|
|
|
quiet++;
|
|
|
|
break;
|
2014-07-05 05:44:26 +00:00
|
|
|
case 'v':
|
|
|
|
verbose++;
|
|
|
|
break;
|
|
|
|
case 'x':
|
|
|
|
dump_xml = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
retry:
|
|
|
|
port_str = malloc(port_len);
|
|
|
|
|
|
|
|
bzero(&list, sizeof(list));
|
|
|
|
list.alloc_len = port_len;
|
|
|
|
list.status = CTL_LUN_LIST_NONE;
|
|
|
|
list.lun_xml = port_str;
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_PORT_LIST, &list) == -1) {
|
|
|
|
warn("%s: error issuing CTL_PORT_LIST ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (list.status == CTL_LUN_LIST_ERROR) {
|
|
|
|
warnx("%s: error returned from CTL_PORT_LIST ioctl:\n%s",
|
|
|
|
__func__, list.error_str);
|
|
|
|
} else if (list.status == CTL_LUN_LIST_NEED_MORE_SPACE) {
|
|
|
|
port_len = port_len << 1;
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dump_xml != 0) {
|
|
|
|
printf("%s", port_str);
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
parser = XML_ParserCreate(NULL);
|
|
|
|
if (parser == NULL) {
|
|
|
|
warn("%s: Unable to create XML parser", __func__);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
XML_SetUserData(parser, &portlist);
|
|
|
|
XML_SetElementHandler(parser, cctl_start_pelement, cctl_end_pelement);
|
|
|
|
XML_SetCharacterDataHandler(parser, cctl_char_phandler);
|
|
|
|
|
|
|
|
retval = XML_Parse(parser, port_str, strlen(port_str), 1);
|
|
|
|
if (retval != 1) {
|
2014-12-20 16:13:31 +00:00
|
|
|
warnx("%s: Unable to parse XML: Error %d", __func__,
|
|
|
|
XML_GetErrorCode(parser));
|
|
|
|
XML_ParserFree(parser);
|
2014-07-05 05:44:26 +00:00
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
2014-12-20 16:13:31 +00:00
|
|
|
XML_ParserFree(parser);
|
2014-07-05 05:44:26 +00:00
|
|
|
|
2014-10-12 06:55:34 +00:00
|
|
|
if (quiet == 0)
|
|
|
|
printf("Port Online Frontend Name pp vp\n");
|
2014-07-05 05:44:26 +00:00
|
|
|
STAILQ_FOREACH(port, &portlist.port_list, links) {
|
|
|
|
struct cctl_lun_nv *nv;
|
|
|
|
|
|
|
|
if ((frontend != NULL)
|
|
|
|
&& (strcmp(port->frontend_type, frontend) != 0))
|
|
|
|
continue;
|
|
|
|
|
2014-10-12 06:55:34 +00:00
|
|
|
if ((portarg != UINT64_MAX) && (portarg != port->port_id))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
printf("%-4ju %-6s %-8s %-8s %-2d %-2d %s\n",
|
2014-07-05 05:44:26 +00:00
|
|
|
(uintmax_t)port->port_id, port->online,
|
|
|
|
port->frontend_type, port->name, port->pp, port->vp,
|
2014-10-12 06:55:34 +00:00
|
|
|
port->port ? port->port : "");
|
2014-07-05 05:44:26 +00:00
|
|
|
|
2014-10-12 06:55:34 +00:00
|
|
|
if (init || verbose) {
|
|
|
|
if (port->target)
|
|
|
|
printf(" Target: %s\n", port->target);
|
|
|
|
STAILQ_FOREACH(nv, &port->init_list, links) {
|
2014-12-20 16:39:56 +00:00
|
|
|
printf(" Initiator %s: %s\n",
|
|
|
|
nv->name, nv->value);
|
2014-10-12 06:55:34 +00:00
|
|
|
}
|
|
|
|
}
|
2014-07-05 05:44:26 +00:00
|
|
|
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
if (lun || verbose) {
|
|
|
|
if (port->lun_map) {
|
|
|
|
STAILQ_FOREACH(nv, &port->lun_list, links)
|
|
|
|
printf(" LUN %s: %s\n",
|
|
|
|
nv->name, nv->value);
|
|
|
|
if (STAILQ_EMPTY(&port->lun_list))
|
|
|
|
printf(" No LUNs mapped\n");
|
|
|
|
} else
|
|
|
|
printf(" All LUNs mapped\n");
|
|
|
|
}
|
|
|
|
|
2014-10-12 06:55:34 +00:00
|
|
|
if (verbose) {
|
|
|
|
STAILQ_FOREACH(nv, &port->attr_list, links) {
|
|
|
|
printf(" %s=%s\n", nv->name, nv->value);
|
|
|
|
}
|
2014-07-05 05:44:26 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
free(port_str);
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
static int
|
|
|
|
cctl_lunmap(int fd, int argc, char **argv, char *combinedopt)
|
|
|
|
{
|
|
|
|
struct ctl_lun_map lm;
|
|
|
|
int retval = 0, c;
|
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
lm.port = UINT32_MAX;
|
|
|
|
lm.plun = UINT32_MAX;
|
|
|
|
lm.lun = UINT32_MAX;
|
|
|
|
|
|
|
|
while ((c = getopt(argc, argv, combinedopt)) != -1) {
|
|
|
|
switch (c) {
|
|
|
|
case 'p':
|
|
|
|
lm.port = strtoll(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'l':
|
|
|
|
lm.plun = strtoll(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'L':
|
|
|
|
lm.lun = strtoll(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ioctl(fd, CTL_LUN_MAP, &lm) == -1) {
|
|
|
|
warn("%s: error issuing CTL_LUN_MAP ioctl", __func__);
|
|
|
|
retval = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
void
|
|
|
|
usage(int error)
|
|
|
|
{
|
|
|
|
fprintf(error ? stderr : stdout,
|
|
|
|
"Usage:\n"
|
|
|
|
"Primary commands:\n"
|
|
|
|
" ctladm tur [dev_id][general options]\n"
|
|
|
|
" ctladm inquiry [dev_id][general options]\n"
|
|
|
|
" ctladm devid [dev_id][general options]\n"
|
|
|
|
" ctladm reqsense [dev_id][general options]\n"
|
|
|
|
" ctladm reportluns [dev_id][general options]\n"
|
|
|
|
" ctladm read [dev_id][general options] <-l lba> <-d len>\n"
|
|
|
|
" <-f file|-> <-b blocksize> [-c cdbsize][-N]\n"
|
|
|
|
" ctladm write [dev_id][general options] <-l lba> <-d len>\n"
|
|
|
|
" <-f file|-> <-b blocksize> [-c cdbsize][-N]\n"
|
|
|
|
" ctladm readcap [dev_id][general options] [-c cdbsize]\n"
|
|
|
|
" ctladm modesense [dev_id][general options] <-m page|-l> [-P pc]\n"
|
|
|
|
" [-d] [-S subpage] [-c cdbsize]\n"
|
|
|
|
" ctladm prin [dev_id][general options] <-a action>\n"
|
|
|
|
" ctladm prout [dev_id][general options] <-a action>\n"
|
|
|
|
" <-r restype] [-k key] [-s sa_key]\n"
|
|
|
|
" ctladm rtpg [dev_id][general options]\n"
|
|
|
|
" ctladm start [dev_id][general options] [-i] [-o]\n"
|
|
|
|
" ctladm stop [dev_id][general options] [-i] [-o]\n"
|
|
|
|
" ctladm synccache [dev_id][general options] [-l lba]\n"
|
|
|
|
" [-b blockcount] [-r] [-i] [-c cdbsize]\n"
|
|
|
|
" ctladm create <-b backend> [-B blocksize] [-d device_id]\n"
|
|
|
|
" [-l lun_id] [-o name=value] [-s size_bytes]\n"
|
|
|
|
" [-S serial_num] [-t dev_type]\n"
|
|
|
|
" ctladm remove <-b backend> <-l lun_id> [-o name=value]\n"
|
2012-03-06 13:43:57 +00:00
|
|
|
" ctladm modify <-b backend> <-l lun_id> <-s size_bytes>\n"
|
2014-07-05 05:44:26 +00:00
|
|
|
" ctladm devlist [-b backend] [-v] [-x]\n"
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
" ctladm shutdown\n"
|
|
|
|
" ctladm startup\n"
|
|
|
|
" ctladm hardstop\n"
|
|
|
|
" ctladm hardstart\n"
|
|
|
|
" ctladm lunlist\n"
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
" ctladm lunmap -p targ_port [-l pLUN] [-L cLUN]\n"
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
" ctladm bbrread [dev_id] <-l lba> <-d datalen>\n"
|
|
|
|
" ctladm delay [dev_id] <-l datamove|done> [-T oneshot|cont]\n"
|
|
|
|
" [-t secs]\n"
|
|
|
|
" ctladm realsync <on|off|query>\n"
|
|
|
|
" ctladm setsync [dev_id] <-i interval>\n"
|
|
|
|
" ctladm getsync [dev_id]\n"
|
|
|
|
" ctladm inject [dev_id] <-i action> <-p pattern> [-r lba,len]\n"
|
|
|
|
" [-s len fmt [args]] [-c] [-d delete_id]\n"
|
|
|
|
" ctladm port <-l | -o <on|off> | [-w wwnn][-W wwpn]>\n"
|
|
|
|
" [-p targ_port] [-t port_type] [-q] [-x]\n"
|
2014-10-12 06:55:34 +00:00
|
|
|
" ctladm portlist [-f frontend] [-i] [-p targ_port] [-q] [-v] [-x]\n"
|
2013-09-14 15:29:06 +00:00
|
|
|
" ctladm islist [-v | -x]\n"
|
2013-10-30 11:38:46 +00:00
|
|
|
" ctladm islogout <-a | -c connection-id | -i name | -p portal>\n"
|
|
|
|
" ctladm isterminate <-a | -c connection-id | -i name | -p portal>\n"
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
" ctladm dumpooa\n"
|
|
|
|
" ctladm dumpstructs\n"
|
|
|
|
" ctladm help\n"
|
|
|
|
"General Options:\n"
|
|
|
|
"-I intiator_id : defaults to 7, used to change the initiator id\n"
|
|
|
|
"-C retries : specify the number of times to retry this command\n"
|
|
|
|
"-D devicename : specify the device to operate on\n"
|
|
|
|
" : (default is %s)\n"
|
|
|
|
"read/write options:\n"
|
|
|
|
"-l lba : logical block address\n"
|
|
|
|
"-d len : read/write length, in blocks\n"
|
|
|
|
"-f file|- : write/read data to/from file or stdout/stdin\n"
|
|
|
|
"-b blocksize : block size, in bytes\n"
|
|
|
|
"-c cdbsize : specify minimum cdb size: 6, 10, 12 or 16\n"
|
|
|
|
"-N : do not copy data to/from userland\n"
|
|
|
|
"readcapacity options:\n"
|
|
|
|
"-c cdbsize : specify minimum cdb size: 10 or 16\n"
|
|
|
|
"modesense options:\n"
|
|
|
|
"-m page : specify the mode page to view\n"
|
|
|
|
"-l : request a list of supported pages\n"
|
|
|
|
"-P pc : specify the page control value: 0-3 (current,\n"
|
|
|
|
" changeable, default, saved, respectively)\n"
|
|
|
|
"-d : disable block descriptors for mode sense\n"
|
|
|
|
"-S subpage : specify a subpage\n"
|
|
|
|
"-c cdbsize : specify minimum cdb size: 6 or 10\n"
|
|
|
|
"persistent reserve in options:\n"
|
|
|
|
"-a action : specify the action value: 0-2 (read key, read\n"
|
|
|
|
" reservation, read capabilities, respectively)\n"
|
|
|
|
"persistent reserve out options:\n"
|
|
|
|
"-a action : specify the action value: 0-5 (register, reserve,\n"
|
|
|
|
" release, clear, preempt, register and ignore)\n"
|
|
|
|
"-k key : key value\n"
|
|
|
|
"-s sa_key : service action value\n"
|
|
|
|
"-r restype : specify the reservation type: 0-5(wr ex, ex ac,\n"
|
|
|
|
" wr ex ro, ex ac ro, wr ex ar, ex ac ar)\n"
|
|
|
|
"start/stop options:\n"
|
|
|
|
"-i : set the immediate bit (CTL does not support this)\n"
|
|
|
|
"-o : set the on/offline bit\n"
|
|
|
|
"synccache options:\n"
|
|
|
|
"-l lba : set the starting LBA\n"
|
|
|
|
"-b blockcount : set the length to sync in blocks\n"
|
|
|
|
"-r : set the relative addressing bit\n"
|
|
|
|
"-i : set the immediate bit\n"
|
|
|
|
"-c cdbsize : specify minimum cdb size: 10 or 16\n"
|
|
|
|
"create options:\n"
|
|
|
|
"-b backend : backend name (\"block\", \"ramdisk\", etc.)\n"
|
|
|
|
"-B blocksize : LUN blocksize in bytes (some backends)\n"
|
|
|
|
"-d device_id : SCSI VPD page 0x83 ID\n"
|
|
|
|
"-l lun_id : requested LUN number\n"
|
|
|
|
"-o name=value : backend-specific options, multiple allowed\n"
|
|
|
|
"-s size_bytes : LUN size in bytes (some backends)\n"
|
|
|
|
"-S serial_num : SCSI VPD page 0x80 serial number\n"
|
|
|
|
"-t dev_type : SCSI device type (0=disk, 3=processor)\n"
|
|
|
|
"remove options:\n"
|
|
|
|
"-b backend : backend name (\"block\", \"ramdisk\", etc.)\n"
|
|
|
|
"-l lun_id : LUN number to delete\n"
|
|
|
|
"-o name=value : backend-specific options, multiple allowed\n"
|
|
|
|
"devlist options:\n"
|
|
|
|
"-b backend : list devices from specified backend only\n"
|
|
|
|
"-v : be verbose, show backend attributes\n"
|
|
|
|
"-x : dump raw XML\n"
|
|
|
|
"delay options:\n"
|
|
|
|
"-l datamove|done : delay command at datamove or done phase\n"
|
|
|
|
"-T oneshot : delay one command, then resume normal completion\n"
|
|
|
|
"-T cont : delay all commands\n"
|
|
|
|
"-t secs : number of seconds to delay\n"
|
|
|
|
"inject options:\n"
|
|
|
|
"-i error_action : action to perform\n"
|
|
|
|
"-p pattern : command pattern to look for\n"
|
|
|
|
"-r lba,len : LBA range for pattern\n"
|
|
|
|
"-s len fmt [args] : sense data for custom sense action\n"
|
|
|
|
"-c : continuous operation\n"
|
|
|
|
"-d delete_id : error id to delete\n"
|
|
|
|
"port options:\n"
|
|
|
|
"-l : list frontend ports\n"
|
|
|
|
"-o on|off : turn frontend ports on or off\n"
|
|
|
|
"-w wwnn : set WWNN for one frontend\n"
|
|
|
|
"-W wwpn : set WWPN for one frontend\n"
|
|
|
|
"-t port_type : specify fc, scsi, ioctl, internal frontend type\n"
|
|
|
|
"-p targ_port : specify target port number\n"
|
|
|
|
"-q : omit header in list output\n"
|
|
|
|
"-x : output port list in XML format\n"
|
2014-10-12 06:55:34 +00:00
|
|
|
"portlist options:\n"
|
|
|
|
"-f fronetnd : specify frontend type\n"
|
|
|
|
"-i : report target and initiators addresses\n"
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
"-l : report LUN mapping\n"
|
2014-10-12 06:55:34 +00:00
|
|
|
"-p targ_port : specify target port number\n"
|
|
|
|
"-q : omit header in list output\n"
|
|
|
|
"-v : verbose output (report all port options)\n"
|
|
|
|
"-x : output port list in XML format\n"
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
"lunmap options:\n"
|
|
|
|
"-p targ_port : specify target port number\n"
|
|
|
|
"-L pLUN : specify port-visible LUN\n"
|
|
|
|
"-L cLUN : specify CTL LUN\n"
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
"bbrread options:\n"
|
|
|
|
"-l lba : starting LBA\n"
|
|
|
|
"-d datalen : length, in bytes, to read\n",
|
|
|
|
CTL_DEFAULT_DEV);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
main(int argc, char **argv)
|
|
|
|
{
|
2012-06-19 06:10:24 +00:00
|
|
|
int c;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
ctladm_cmdfunction command;
|
|
|
|
ctladm_cmdargs cmdargs;
|
|
|
|
ctladm_optret optreturn;
|
|
|
|
char *device;
|
|
|
|
const char *mainopt = "C:D:I:";
|
|
|
|
const char *subopt = NULL;
|
|
|
|
char combinedopt[256];
|
|
|
|
int target, lun;
|
|
|
|
int optstart = 2;
|
|
|
|
int retval, fd;
|
2012-06-19 06:10:24 +00:00
|
|
|
int retries;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
int initid;
|
2013-04-10 08:48:10 +00:00
|
|
|
int saved_errno;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
|
|
|
|
retval = 0;
|
|
|
|
cmdargs = CTLADM_ARG_NONE;
|
|
|
|
command = CTLADM_CMD_HELP;
|
|
|
|
device = NULL;
|
|
|
|
fd = -1;
|
|
|
|
retries = 0;
|
|
|
|
target = 0;
|
|
|
|
lun = 0;
|
|
|
|
initid = 7;
|
|
|
|
|
|
|
|
if (argc < 2) {
|
|
|
|
usage(1);
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the base option.
|
|
|
|
*/
|
|
|
|
optreturn = getoption(option_table,argv[1], &command, &cmdargs,&subopt);
|
|
|
|
|
|
|
|
if (optreturn == CC_OR_AMBIGUOUS) {
|
|
|
|
warnx("ambiguous option %s", argv[1]);
|
|
|
|
usage(0);
|
|
|
|
exit(1);
|
|
|
|
} else if (optreturn == CC_OR_NOT_FOUND) {
|
|
|
|
warnx("option %s not found", argv[1]);
|
|
|
|
usage(0);
|
|
|
|
exit(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (cmdargs & CTLADM_ARG_NEED_TL) {
|
2014-10-22 09:17:17 +00:00
|
|
|
if ((argc < 3)
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
|| (!isdigit(argv[2][0]))) {
|
|
|
|
warnx("option %s requires a target:lun argument",
|
|
|
|
argv[1]);
|
|
|
|
usage(0);
|
|
|
|
exit(1);
|
|
|
|
}
|
|
|
|
retval = cctl_parse_tl(argv[2], &target, &lun);
|
|
|
|
if (retval != 0)
|
|
|
|
errx(1, "invalid target:lun argument %s", argv[2]);
|
|
|
|
|
|
|
|
cmdargs |= CTLADM_ARG_TARG_LUN;
|
|
|
|
optstart++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ahh, getopt(3) is a pain.
|
|
|
|
*
|
|
|
|
* This is a gross hack. There really aren't many other good
|
|
|
|
* options (excuse the pun) for parsing options in a situation like
|
|
|
|
* this. getopt is kinda braindead, so you end up having to run
|
|
|
|
* through the options twice, and give each invocation of getopt
|
|
|
|
* the option string for the other invocation.
|
|
|
|
*
|
|
|
|
* You would think that you could just have two groups of options.
|
|
|
|
* The first group would get parsed by the first invocation of
|
|
|
|
* getopt, and the second group would get parsed by the second
|
|
|
|
* invocation of getopt. It doesn't quite work out that way. When
|
|
|
|
* the first invocation of getopt finishes, it leaves optind pointing
|
|
|
|
* to the argument _after_ the first argument in the second group.
|
|
|
|
* So when the second invocation of getopt comes around, it doesn't
|
|
|
|
* recognize the first argument it gets and then bails out.
|
|
|
|
*
|
|
|
|
* A nice alternative would be to have a flag for getopt that says
|
|
|
|
* "just keep parsing arguments even when you encounter an unknown
|
|
|
|
* argument", but there isn't one. So there's no real clean way to
|
|
|
|
* easily parse two sets of arguments without having one invocation
|
|
|
|
* of getopt know about the other.
|
|
|
|
*
|
|
|
|
* Without this hack, the first invocation of getopt would work as
|
|
|
|
* long as the generic arguments are first, but the second invocation
|
|
|
|
* (in the subfunction) would fail in one of two ways. In the case
|
|
|
|
* where you don't set optreset, it would fail because optind may be
|
|
|
|
* pointing to the argument after the one it should be pointing at.
|
|
|
|
* In the case where you do set optreset, and reset optind, it would
|
|
|
|
* fail because getopt would run into the first set of options, which
|
|
|
|
* it doesn't understand.
|
|
|
|
*
|
|
|
|
* All of this would "sort of" work if you could somehow figure out
|
|
|
|
* whether optind had been incremented one option too far. The
|
|
|
|
* mechanics of that, however, are more daunting than just giving
|
|
|
|
* both invocations all of the expect options for either invocation.
|
|
|
|
*
|
|
|
|
* Needless to say, I wouldn't mind if someone invented a better
|
|
|
|
* (non-GPL!) command line parsing interface than getopt. I
|
|
|
|
* wouldn't mind if someone added more knobs to getopt to make it
|
|
|
|
* work better. Who knows, I may talk myself into doing it someday,
|
|
|
|
* if the standards weenies let me. As it is, it just leads to
|
|
|
|
* hackery like this and causes people to avoid it in some cases.
|
|
|
|
*
|
|
|
|
* KDM, September 8th, 1998
|
|
|
|
*/
|
|
|
|
if (subopt != NULL)
|
|
|
|
sprintf(combinedopt, "%s%s", mainopt, subopt);
|
|
|
|
else
|
|
|
|
sprintf(combinedopt, "%s", mainopt);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Start getopt processing at argv[2/3], since we've already
|
|
|
|
* accepted argv[1..2] as the command name, and as a possible
|
|
|
|
* device name.
|
|
|
|
*/
|
|
|
|
optind = optstart;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Now we run through the argument list looking for generic
|
|
|
|
* options, and ignoring options that possibly belong to
|
|
|
|
* subfunctions.
|
|
|
|
*/
|
|
|
|
while ((c = getopt(argc, argv, combinedopt))!= -1){
|
|
|
|
switch (c) {
|
|
|
|
case 'C':
|
|
|
|
cmdargs |= CTLADM_ARG_RETRIES;
|
|
|
|
retries = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
case 'D':
|
|
|
|
device = strdup(optarg);
|
|
|
|
cmdargs |= CTLADM_ARG_DEVICE;
|
|
|
|
break;
|
|
|
|
case 'I':
|
|
|
|
cmdargs |= CTLADM_ARG_INITIATOR;
|
|
|
|
initid = strtol(optarg, NULL, 0);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((cmdargs & CTLADM_ARG_INITIATOR) == 0)
|
|
|
|
initid = 7;
|
|
|
|
|
|
|
|
optind = optstart;
|
|
|
|
optreset = 1;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Default to opening the CTL device for now.
|
|
|
|
*/
|
|
|
|
if (((cmdargs & CTLADM_ARG_DEVICE) == 0)
|
|
|
|
&& (command != CTLADM_CMD_HELP)) {
|
|
|
|
device = strdup(CTL_DEFAULT_DEV);
|
|
|
|
cmdargs |= CTLADM_ARG_DEVICE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((cmdargs & CTLADM_ARG_DEVICE)
|
|
|
|
&& (command != CTLADM_CMD_HELP)) {
|
|
|
|
fd = open(device, O_RDWR);
|
2013-04-10 08:48:10 +00:00
|
|
|
if (fd == -1 && errno == ENOENT) {
|
|
|
|
saved_errno = errno;
|
|
|
|
retval = kldload("ctl");
|
|
|
|
if (retval != -1)
|
|
|
|
fd = open(device, O_RDWR);
|
|
|
|
else
|
|
|
|
errno = saved_errno;
|
|
|
|
}
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
if (fd == -1) {
|
|
|
|
fprintf(stderr, "%s: error opening %s: %s\n",
|
|
|
|
argv[0], device, strerror(errno));
|
|
|
|
retval = 1;
|
|
|
|
goto bailout;
|
|
|
|
}
|
|
|
|
} else if ((command != CTLADM_CMD_HELP)
|
|
|
|
&& ((cmdargs & CTLADM_ARG_DEVICE) == 0)) {
|
|
|
|
fprintf(stderr, "%s: you must specify a device with the "
|
|
|
|
"--device argument for this command\n", argv[0]);
|
|
|
|
command = CTLADM_CMD_HELP;
|
|
|
|
retval = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (command) {
|
|
|
|
case CTLADM_CMD_TUR:
|
|
|
|
retval = cctl_tur(fd, target, lun, initid, retries);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_INQUIRY:
|
|
|
|
retval = cctl_inquiry(fd, target, lun, initid, retries);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_REQ_SENSE:
|
|
|
|
retval = cctl_req_sense(fd, target, lun, initid, retries);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_REPORT_LUNS:
|
|
|
|
retval = cctl_report_luns(fd, target, lun, initid, retries);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_CREATE:
|
|
|
|
retval = cctl_create_lun(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_RM:
|
|
|
|
retval = cctl_rm_lun(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_DEVLIST:
|
|
|
|
retval = cctl_devlist(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_READ:
|
|
|
|
case CTLADM_CMD_WRITE:
|
|
|
|
retval = cctl_read_write(fd, target, lun, initid, retries,
|
|
|
|
argc, argv, combinedopt, command);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_PORT:
|
|
|
|
retval = cctl_port(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
2014-07-05 05:44:26 +00:00
|
|
|
case CTLADM_CMD_PORTLIST:
|
|
|
|
retval = cctl_portlist(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
CTL LUN mapping rewrite.
Replace iSCSI-specific LUN mapping mechanism with new one, working for any
ports. By default all ports are created without LUN mapping, exposing all
CTL LUNs as before. But, if needed, LUN mapping can be manually set on
per-port basis via ctladm. For its iSCSI ports ctld does it via ioctl(2).
The next step will be to teach ctld to work with FibreChannel ports also.
Respecting additional flexibility of the new mechanism, ctl.conf now allows
alternative syntax for LUN definition. LUNs can now be defined in global
context, and then referenced from targets by unique name, as needed. It
allows same LUN to be exposed several times via multiple targets.
While there, increase limit for LUNs per target in ctld from 256 to 1024.
Some initiators do not support LUNs above 255, but that is not our problem.
Discussed with: trasz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
2015-02-01 21:50:28 +00:00
|
|
|
case CTLADM_CMD_LUNMAP:
|
|
|
|
retval = cctl_lunmap(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
case CTLADM_CMD_READCAPACITY:
|
|
|
|
retval = cctl_read_capacity(fd, target, lun, initid, retries,
|
|
|
|
argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_MODESENSE:
|
|
|
|
retval = cctl_mode_sense(fd, target, lun, initid, retries,
|
|
|
|
argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_START:
|
|
|
|
case CTLADM_CMD_STOP:
|
|
|
|
retval = cctl_start_stop(fd, target, lun, initid, retries,
|
|
|
|
(command == CTLADM_CMD_START) ? 1 : 0,
|
|
|
|
argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_SYNC_CACHE:
|
|
|
|
retval = cctl_sync_cache(fd, target, lun, initid, retries,
|
|
|
|
argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_SHUTDOWN:
|
|
|
|
case CTLADM_CMD_STARTUP:
|
|
|
|
retval = cctl_startup_shutdown(fd, target, lun, initid,
|
|
|
|
command);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_HARDSTOP:
|
|
|
|
case CTLADM_CMD_HARDSTART:
|
|
|
|
retval = cctl_hardstopstart(fd, command);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_BBRREAD:
|
|
|
|
retval = cctl_bbrread(fd, target, lun, initid, argc, argv,
|
|
|
|
combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_LUNLIST:
|
|
|
|
retval = cctl_lunlist(fd);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_DELAY:
|
|
|
|
retval = cctl_delay(fd, target, lun, argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_REALSYNC:
|
|
|
|
retval = cctl_realsync(fd, argc, argv);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_SETSYNC:
|
|
|
|
case CTLADM_CMD_GETSYNC:
|
|
|
|
retval = cctl_getsetsync(fd, target, lun, command,
|
|
|
|
argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_ERR_INJECT:
|
|
|
|
retval = cctl_error_inject(fd, target, lun, argc, argv,
|
|
|
|
combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_DUMPOOA:
|
|
|
|
retval = cctl_dump_ooa(fd, argc, argv);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_DUMPSTRUCTS:
|
|
|
|
retval = cctl_dump_structs(fd, cmdargs);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_PRES_IN:
|
2014-10-22 09:17:17 +00:00
|
|
|
retval = cctl_persistent_reserve_in(fd, target, lun, initid,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
argc, argv, combinedopt,
|
|
|
|
retries);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_PRES_OUT:
|
2014-10-22 09:17:17 +00:00
|
|
|
retval = cctl_persistent_reserve_out(fd, target, lun, initid,
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
argc, argv, combinedopt,
|
|
|
|
retries);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_INQ_VPD_DEVID:
|
|
|
|
retval = cctl_inquiry_vpd_devid(fd, target, lun, initid);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_RTPG:
|
|
|
|
retval = cctl_report_target_port_group(fd, target, lun, initid);
|
|
|
|
break;
|
2012-03-06 13:43:57 +00:00
|
|
|
case CTLADM_CMD_MODIFY:
|
|
|
|
retval = cctl_modify_lun(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
2013-09-14 15:29:06 +00:00
|
|
|
case CTLADM_CMD_ISLIST:
|
|
|
|
retval = cctl_islist(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_ISLOGOUT:
|
|
|
|
retval = cctl_islogout(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
|
|
|
case CTLADM_CMD_ISTERMINATE:
|
|
|
|
retval = cctl_isterminate(fd, argc, argv, combinedopt);
|
|
|
|
break;
|
Add the CAM Target Layer (CTL).
CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.
It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.
Some CTL features:
- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.
(1) HA Support is just an API stub, and needs much more to be fully
functional.
ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.
ctl.h: Basic function declarations and data structures.
ctl_backend.c,
ctl_backend.h: The basic CTL backend API.
ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.
ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.
ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.
ctl_debug.h: Debugging support.
ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.
ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.
ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.
ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.
ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.
ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.
ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.
ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.
ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.
ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.
ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.
ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.
scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.
README.ctl.txt: CTL code features, roadmap, to-do list.
usr.sbin/Makefile: Add ctladm.
ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.
usr.bin/Makefile: Add ctlstat.
ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.
sys/conf/files: Add CTL files.
sys/conf/NOTES: Add device ctl.
sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.
Add several mode page definitions for CTL.
sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.
sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.
scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.
amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.
i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.
Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month
2012-01-12 00:34:33 +00:00
|
|
|
case CTLADM_CMD_HELP:
|
|
|
|
default:
|
|
|
|
usage(retval);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
bailout:
|
|
|
|
|
|
|
|
if (fd != -1)
|
|
|
|
close(fd);
|
|
|
|
|
|
|
|
exit (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* vim: ts=8
|
|
|
|
*/
|