freebsd-nq/sys/i386/include/pmap.h

534 lines
15 KiB
C
Raw Normal View History

/*-
1993-06-12 14:58:17 +00:00
* Copyright (c) 1991 Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department and William Jolitz of UUNET Technologies Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Derived from hp300 version by Mike Hibler, this version by William
* Jolitz uses a recursive map [a pde points to the page directory] to
* map the page tables using the pagetables themselves. This is done to
* reduce the impact on kernel virtual memory for lots of sparse address
* space, and to reduce the cost of memory to each process.
*
* from: hp300: @(#)pmap.h 7.2 (Berkeley) 12/16/90
* from: @(#)pmap.h 7.4 (Berkeley) 5/12/91
1999-08-28 01:08:13 +00:00
* $FreeBSD$
1993-06-12 14:58:17 +00:00
*/
#ifndef _MACHINE_PMAP_H_
#define _MACHINE_PMAP_H_
1993-06-12 14:58:17 +00:00
/*
* Page-directory and page-table entries follow this format, with a few
* of the fields not present here and there, depending on a lot of things.
*/
/* ---- Intel Nomenclature ---- */
#define PG_V 0x001 /* P Valid */
#define PG_RW 0x002 /* R/W Read/Write */
#define PG_U 0x004 /* U/S User/Supervisor */
#define PG_NC_PWT 0x008 /* PWT Write through */
#define PG_NC_PCD 0x010 /* PCD Cache disable */
#define PG_A 0x020 /* A Accessed */
#define PG_M 0x040 /* D Dirty */
#define PG_PS 0x080 /* PS Page size (0=4k,1=4M) */
#define PG_PTE_PAT 0x080 /* PAT PAT index */
#define PG_G 0x100 /* G Global */
#define PG_AVAIL1 0x200 /* / Available for system */
#define PG_AVAIL2 0x400 /* < programmers use */
#define PG_AVAIL3 0x800 /* \ */
#define PG_PDE_PAT 0x1000 /* PAT PAT index */
#ifdef PAE
#define PG_NX (1ull<<63) /* No-execute */
#endif
/* Our various interpretations of the above */
#define PG_W PG_AVAIL1 /* "Wired" pseudoflag */
This set of commits to the VM system does the following, and contain contributions or ideas from Stephen McKay <syssgm@devetir.qld.gov.au>, Alan Cox <alc@cs.rice.edu>, David Greenman <davidg@freebsd.org> and me: More usage of the TAILQ macros. Additional minor fix to queue.h. Performance enhancements to the pageout daemon. Addition of a wait in the case that the pageout daemon has to run immediately. Slightly modify the pageout algorithm. Significant revamp of the pmap/fork code: 1) PTE's and UPAGES's are NO LONGER in the process's map. 2) PTE's and UPAGES's reside in their own objects. 3) TOTAL elimination of recursive page table pagefaults. 4) The page directory now resides in the PTE object. 5) Implemented pmap_copy, thereby speeding up fork time. 6) Changed the pv entries so that the head is a pointer and not an entire entry. 7) Significant cleanup of pmap_protect, and pmap_remove. 8) Removed significant amounts of machine dependent fork code from vm_glue. Pushed much of that code into the machine dependent pmap module. 9) Support more completely the reuse of already zeroed pages (Page table pages and page directories) as being already zeroed. Performance and code cleanups in vm_map: 1) Improved and simplified allocation of map entries. 2) Improved vm_map_copy code. 3) Corrected some minor problems in the simplify code. Implemented splvm (combo of splbio and splimp.) The VM code now seldom uses splhigh. Improved the speed of and simplified kmem_malloc. Minor mod to vm_fault to avoid using pre-zeroed pages in the case of objects with backing objects along with the already existant condition of having a vnode. (If there is a backing object, there will likely be a COW... With a COW, it isn't necessary to start with a pre-zeroed page.) Minor reorg of source to perhaps improve locality of ref.
1996-05-18 03:38:05 +00:00
#define PG_MANAGED PG_AVAIL2
#ifdef PAE
#define PG_FRAME (0x000ffffffffff000ull)
#define PG_PS_FRAME (0x000fffffffe00000ull)
#else
#define PG_FRAME (~PAGE_MASK)
#define PG_PS_FRAME (0xffc00000)
#endif
#define PG_PROT (PG_RW|PG_U) /* all protection bits . */
#define PG_N (PG_NC_PWT|PG_NC_PCD) /* Non-cacheable */
1993-06-12 14:58:17 +00:00
/* Page level cache control fields used to determine the PAT type */
#define PG_PDE_CACHE (PG_PDE_PAT | PG_NC_PWT | PG_NC_PCD)
#define PG_PTE_CACHE (PG_PTE_PAT | PG_NC_PWT | PG_NC_PCD)
/*
* Promotion to a 2 or 4MB (PDE) page mapping requires that the corresponding
* 4KB (PTE) page mappings have identical settings for the following fields:
*/
#define PG_PTE_PROMOTE (PG_MANAGED | PG_W | PG_G | PG_PTE_PAT | \
PG_M | PG_A | PG_NC_PCD | PG_NC_PWT | PG_U | PG_RW | PG_V)
/*
* Page Protection Exception bits
*/
#define PGEX_P 0x01 /* Protection violation vs. not present */
#define PGEX_W 0x02 /* during a Write cycle */
#define PGEX_U 0x04 /* access from User mode (UPL) */
2007-04-12 17:00:56 +00:00
#define PGEX_RSV 0x08 /* reserved PTE field is non-zero */
#define PGEX_I 0x10 /* during an instruction fetch */
/*
* Size of Kernel address space. This is the number of page table pages
* (4MB each) to use for the kernel. 256 pages == 1 Gigabyte.
* This **MUST** be a multiple of 4 (eg: 252, 256, 260, etc).
* For PAE, the page table page unit size is 2MB. This means that 512 pages
* is 1 Gigabyte. Double everything. It must be a multiple of 8 for PAE.
*/
#ifndef KVA_PAGES
#ifdef PAE
#define KVA_PAGES 512
#else
#define KVA_PAGES 256
#endif
#endif
/*
* Pte related macros
*/
#define VADDR(pdi, pti) ((vm_offset_t)(((pdi)<<PDRSHIFT)|((pti)<<PAGE_SHIFT)))
1993-06-12 14:58:17 +00:00
/* Initial number of kernel page tables. */
#ifndef NKPT
#ifdef PAE
/* 152 page tables needed to map 16G (76B "struct vm_page", 2M page tables). */
#define NKPT 240
#else
/* 18 page tables needed to map 4G (72B "struct vm_page", 4M page tables). */
#define NKPT 30
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
#endif
#endif
#ifndef NKPDE
#define NKPDE (KVA_PAGES) /* number of page tables/pde's */
#endif
/*
* The *PTDI values control the layout of virtual memory
*
* XXX This works for now, but I am not real happy with it, I'll fix it
* right after I fix locore.s and the magic 28K hole
*/
#define KPTDI (NPDEPTD-NKPDE) /* start of kernel virtual pde's */
#define PTDPTDI (KPTDI-NPGPTD) /* ptd entry that points to ptd! */
First steps in rewriting locore.s, and making info useful when the machine panics. i386/i386/locore.s: 1) got rid of most .set directives that were being used like #define's, and replaced them with appropriate #define's in the appropriate header files (accessed via genassym). 2) added comments to header inclusions and global definitions, and global variables 3) replaced some hardcoded constants with cpp defines (such as PDESIZE and others) 4) aligned all comments to the same column to make them easier to read 5) moved macro definitions for ENTRY, ALIGN, NOP, etc. to /sys/i386/include/asmacros.h 6) added #ifdef BDE_DEBUGGER around all of Bruce's debugger code 7) added new global '_KERNend' to store last location+1 of kernel 8) cleaned up zeroing of bss so that only bss is zeroed 9) fix zeroing of page tables so that it really does zero them all - not just if they follow the bss. 10) rewrote page table initialization code so that 1) works correctly and 2) write protects the kernel text by default 11) properly initialize the kernel page directory, upages, p0stack PT, and page tables. The previous scheme was more than a bit screwy. 12) change allocation of virtual area of IO hole so that it is fixed at KERNBASE + 0xa0000. The previous scheme put it right after the kernel page tables and then later expected it to be at KERNBASE +0xa0000 13) change multiple bogus settings of user read/write of various areas of kernel VM - including the IO hole; we should never be accessing the IO hole in user mode through the kernel page tables 14) split kernel support routines such as bcopy, bzero, copyin, copyout, etc. into a seperate file 'support.s' 15) split swtch and related routines into a seperate 'swtch.s' 16) split routines related to traps, syscalls, and interrupts into a seperate file 'exception.s' 17) remove some unused global variables from locore that got inserted by Garrett when he pulled them out of some .h files. i386/isa/icu.s: 1) clean up global variable declarations 2) move in declaration of astpending and netisr i386/i386/pmap.c: 1) fix calculation of virtual_avail. It previously was calculated to be right in the middle of the kernel page tables - not a good place to start allocating kernel VM. 2) properly allocate kernel page dir/tables etc out of kernel map - previously only took out 2 pages. i386/i386/machdep.c: 1) modify boot() to print a warning that the system will reboot in PANIC_REBOOT_WAIT_TIME amount of seconds, and let the user abort with a key on the console. The machine will wait for ever if a key is typed before the reboot. The default is 15 seconds, but can be set to 0 to mean don't wait at all, -1 to mean wait forever, or any positive value to wait for that many seconds. 2) print "Rebooting..." just before doing it. kern/subr_prf.c: 1) remove PANICWAIT as it is deprecated by the change to machdep.c i386/i386/trap.c: 1) add table of trap type strings and use it to print a real trap/ panic message rather than just a number. Lot's of work to be done here, but this is the first step. Symbolic traceback is in the TODO. i386/i386/Makefile.i386: 1) add support in to build support.s, exception.s and swtch.s ...and various changes to various header files to make all of the above happen.
1993-11-13 02:25:21 +00:00
/*
* XXX doesn't really belong here I guess...
*/
#define ISA_HOLE_START 0xa0000
#define ISA_HOLE_LENGTH (0x100000-ISA_HOLE_START)
#ifndef LOCORE
#include <sys/queue.h>
Commit the support for removing cpumask_t and replacing it directly with cpuset_t objects. That is going to offer the underlying support for a simple bump of MAXCPU and then support for number of cpus > 32 (as it is today). Right now, cpumask_t is an int, 32 bits on all our supported architecture. cpumask_t on the other side is implemented as an array of longs, and easilly extendible by definition. The architectures touched by this commit are the following: - amd64 - i386 - pc98 - arm - ia64 - XEN while the others are still missing. Userland is believed to be fully converted with the changes contained here. Some technical notes: - This commit may be considered an ABI nop for all the architectures different from amd64 and ia64 (and sparc64 in the future) - per-cpu members, which are now converted to cpuset_t, needs to be accessed avoiding migration, because the size of cpuset_t should be considered unknown - size of cpuset_t objects is different from kernel and userland (this is primirally done in order to leave some more space in userland to cope with KBI extensions). If you need to access kernel cpuset_t from the userland please refer to example in this patch on how to do that correctly (kgdb may be a good source, for example). - Support for other architectures is going to be added soon - Only MAXCPU for amd64 is bumped now The patch has been tested by sbruno and Nicholas Esborn on opteron 4 x 12 pack CPUs. More testing on big SMP is expected to came soon. pluknet tested the patch with his 8-ways on both amd64 and i386. Tested by: pluknet, sbruno, gianni, Nicholas Esborn Reviewed by: jeff, jhb, sbruno
2011-05-05 14:39:14 +00:00
#include <sys/_cpuset.h>
#include <sys/_lock.h>
#include <sys/_mutex.h>
#ifdef PAE
typedef uint64_t pdpt_entry_t;
typedef uint64_t pd_entry_t;
typedef uint64_t pt_entry_t;
#define PTESHIFT (3)
#define PDESHIFT (3)
#else
typedef uint32_t pd_entry_t;
typedef uint32_t pt_entry_t;
#define PTESHIFT (2)
#define PDESHIFT (2)
1993-06-12 14:58:17 +00:00
#endif
1993-06-12 14:58:17 +00:00
/*
* Address of current address space page table maps and directories.
1993-06-12 14:58:17 +00:00
*/
#ifdef _KERNEL
extern pt_entry_t PTmap[];
extern pd_entry_t PTD[];
extern pd_entry_t PTDpde[];
1993-06-12 14:58:17 +00:00
#ifdef PAE
extern pdpt_entry_t *IdlePDPT;
#endif
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
extern pd_entry_t *IdlePTD; /* physical address of "Idle" state directory */
1993-06-12 14:58:17 +00:00
/*
* Translate a virtual address to the kernel virtual address of its page table
* entry (PTE). This can be used recursively. If the address of a PTE as
* previously returned by this macro is itself given as the argument, then the
* address of the page directory entry (PDE) that maps the PTE will be
* returned.
*
* This macro may be used before pmap_bootstrap() is called.
1993-06-12 14:58:17 +00:00
*/
#define vtopte(va) (PTmap + i386_btop(va))
/*
* Translate a virtual address to its physical address.
*
* This macro may be used before pmap_bootstrap() is called.
*/
#define vtophys(va) pmap_kextract((vm_offset_t)(va))
1993-06-12 14:58:17 +00:00
#if defined(XEN)
#include <sys/param.h>
#include <machine/xen/xen-os.h>
#include <machine/xen/xenvar.h>
#include <machine/xen/xenpmap.h>
extern pt_entry_t pg_nx;
#define PG_KERNEL (PG_V | PG_A | PG_RW | PG_M)
#define MACH_TO_VM_PAGE(ma) PHYS_TO_VM_PAGE(xpmap_mtop((ma)))
#define VM_PAGE_TO_MACH(m) xpmap_ptom(VM_PAGE_TO_PHYS((m)))
#define VTOM(va) xpmap_ptom(VTOP(va))
static __inline vm_paddr_t
pmap_kextract_ma(vm_offset_t va)
{
vm_paddr_t ma;
if ((ma = PTD[va >> PDRSHIFT]) & PG_PS) {
ma = (ma & ~(NBPDR - 1)) | (va & (NBPDR - 1));
} else {
ma = (*vtopte(va) & PG_FRAME) | (va & PAGE_MASK);
}
return ma;
}
static __inline vm_paddr_t
pmap_kextract(vm_offset_t va)
{
return xpmap_mtop(pmap_kextract_ma(va));
}
#define vtomach(va) pmap_kextract_ma(((vm_offset_t) (va)))
vm_paddr_t pmap_extract_ma(struct pmap *pmap, vm_offset_t va);
void pmap_kenter_ma(vm_offset_t va, vm_paddr_t pa);
void pmap_map_readonly(struct pmap *pmap, vm_offset_t va, int len);
void pmap_map_readwrite(struct pmap *pmap, vm_offset_t va, int len);
static __inline pt_entry_t
pte_load_store(pt_entry_t *ptep, pt_entry_t v)
{
pt_entry_t r;
r = *ptep;
PT_SET_VA(ptep, v, TRUE);
return (r);
}
static __inline pt_entry_t
pte_load_store_ma(pt_entry_t *ptep, pt_entry_t v)
{
pt_entry_t r;
r = *ptep;
PT_SET_VA_MA(ptep, v, TRUE);
return (r);
}
#define pte_load_clear(ptep) pte_load_store((ptep), (pt_entry_t)0ULL)
#define pte_store(ptep, pte) pte_load_store((ptep), (pt_entry_t)pte)
#define pte_store_ma(ptep, pte) pte_load_store_ma((ptep), (pt_entry_t)pte)
#define pde_store_ma(ptep, pte) pte_load_store_ma((ptep), (pt_entry_t)pte)
#elif !defined(XEN)
/*
* KPTmap is a linear mapping of the kernel page table. It differs from the
* recursive mapping in two ways: (1) it only provides access to kernel page
* table pages, and not user page table pages, and (2) it provides access to
* a kernel page table page after the corresponding virtual addresses have
* been promoted to a 2/4MB page mapping.
*
* KPTmap is first initialized by locore to support just NPKT page table
* pages. Later, it is reinitialized by pmap_bootstrap() to allow for
* expansion of the kernel page table.
*/
extern pt_entry_t *KPTmap;
/*
* Extract from the kernel page table the physical address that is mapped by
* the given virtual address "va".
*
* This function may be used before pmap_bootstrap() is called.
*/
static __inline vm_paddr_t
pmap_kextract(vm_offset_t va)
{
vm_paddr_t pa;
if ((pa = PTD[va >> PDRSHIFT]) & PG_PS) {
pa = (pa & PG_PS_FRAME) | (va & PDRMASK);
} else {
/*
* Beware of a concurrent promotion that changes the PDE at
* this point! For example, vtopte() must not be used to
* access the PTE because it would use the new PDE. It is,
* however, safe to use the old PDE because the page table
* page is preserved by the promotion.
*/
pa = KPTmap[i386_btop(va)];
pa = (pa & PG_FRAME) | (va & PAGE_MASK);
}
return (pa);
}
#endif
#if !defined(XEN)
#define PT_UPDATES_FLUSH()
#endif
#if defined(PAE) && !defined(XEN)
#define pde_cmpset(pdep, old, new) \
atomic_cmpset_64((pdep), (old), (new))
static __inline pt_entry_t
pte_load(pt_entry_t *ptep)
{
pt_entry_t r;
__asm __volatile(
"lock; cmpxchg8b %1"
: "=A" (r)
: "m" (*ptep), "a" (0), "d" (0), "b" (0), "c" (0));
return (r);
}
static __inline pt_entry_t
pte_load_store(pt_entry_t *ptep, pt_entry_t v)
{
pt_entry_t r;
r = *ptep;
__asm __volatile(
"1:\n"
"\tlock; cmpxchg8b %1\n"
"\tjnz 1b"
: "+A" (r)
: "m" (*ptep), "b" ((uint32_t)v), "c" ((uint32_t)(v >> 32)));
return (r);
}
/* XXXRU move to atomic.h? */
static __inline int
atomic_cmpset_64(volatile uint64_t *dst, uint64_t exp, uint64_t src)
{
int64_t res = exp;
__asm __volatile (
" lock ; "
" cmpxchg8b %2 ; "
" setz %%al ; "
" movzbl %%al,%0 ; "
"# atomic_cmpset_64"
: "+A" (res), /* 0 (result) */
"=m" (*dst) /* 1 */
: "m" (*dst), /* 2 */
"b" ((uint32_t)src),
"c" ((uint32_t)(src >> 32)));
return (res);
}
#define pte_load_clear(ptep) pte_load_store((ptep), (pt_entry_t)0ULL)
#define pte_store(ptep, pte) pte_load_store((ptep), (pt_entry_t)pte)
extern pt_entry_t pg_nx;
#elif !defined(PAE) && !defined (XEN)
#define pde_cmpset(pdep, old, new) \
atomic_cmpset_int((pdep), (old), (new))
static __inline pt_entry_t
pte_load(pt_entry_t *ptep)
{
pt_entry_t r;
r = *ptep;
return (r);
}
static __inline pt_entry_t
pte_load_store(pt_entry_t *ptep, pt_entry_t pte)
{
__asm volatile("xchgl %0, %1" : "+m" (*ptep), "+r" (pte));
return (pte);
}
#define pte_load_clear(pte) atomic_readandclear_int(pte)
static __inline void
pte_store(pt_entry_t *ptep, pt_entry_t pte)
{
*ptep = pte;
}
#endif /* PAE */
#define pte_clear(ptep) pte_store((ptep), (pt_entry_t)0ULL)
#define pde_store(pdep, pde) pte_store((pdep), (pde))
#endif /* _KERNEL */
1993-06-12 14:58:17 +00:00
/*
* Pmap stuff
*/
struct pv_entry;
MFamd64: shrink pv entries from 24 bytes to about 12 bytes. (336 pv entries per page = effectively 12.19 bytes per pv entry after overheads). Instead of using a shared UMA zone for 24 byte pv entries (two 8-byte tailq nodes, a 4 byte pointer, and a 4 byte address), we allocate a page at a time per process. This provides 336 pv entries per process (actually, per pmap address space) and eliminates one of the 8-byte tailq entries since we now can track per-process pv entries implicitly. The pointer to the pmap can be eliminated by doing address arithmetic to find the metadata on the page headers to find a single pointer shared by all 336 entries. There is an 11-int bitmap for the freelist of those 336 entries. This is mostly a mechanical conversion from amd64, except: * i386 has to allocate kvm and map the pages, amd64 has them outside of kvm * native word size is smaller, so bitmaps etc become 32 bit instead of 64 * no dump_add_page() etc stuff because they are in kvm always. * various pmap internals tweaks because pmap uses direct map on amd64 but on i386 it has to use sched_pin and temporary mappings. Also, sysctl vm.pmap.pv_entry_max and vm.pmap.shpgperproc are now dynamic sysctls. Like on amd64, i386 can now tune the pv entry limits without a recompile or reboot. This is important because of the following scenario. If you have a 1GB file (262144 pages) mmap()ed into 50 processes, that requires 13 million pv entries. At 24 bytes per pv entry, that is 314MB of ram and kvm, while at 12 bytes it is 157MB. A 157MB saving is significant. Test-run by: scottl (Thanks!)
2006-04-26 21:49:20 +00:00
struct pv_chunk;
struct md_page {
TAILQ_HEAD(,pv_entry) pv_list;
Add support to the virtual memory system for configuring machine- dependent memory attributes: Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the fact that there are machine-dependent memory attributes that have nothing to do with controlling the cache's behavior. Introduce vm_object_set_memattr() for setting the default memory attributes that will be given to an object's pages. Introduce and use pmap_page_{get,set}_memattr() for getting and setting a page's machine-dependent memory attributes. Add full support for these functions on amd64 and i386 and stubs for them on the other architectures. The function pmap_page_set_memattr() is also responsible for any other machine-dependent aspects of changing a page's memory attributes, such as flushing the cache or updating the direct map. The uses include kmem_alloc_contig(), vm_page_alloc(), and the device pager: kmem_alloc_contig() can now be used to allocate kernel memory with non-default memory attributes on amd64 and i386. vm_page_alloc() and the device pager will set the memory attributes for the real or fictitious page according to the object's default memory attributes. Update the various pmap functions on amd64 and i386 that map pages to incorporate each page's memory attributes in the mapping. Notes: (1) Inherent to this design are safety features that prevent the specification of inconsistent memory attributes by different mappings on amd64 and i386. In addition, the device pager provides a warning when a device driver creates a fictitious page with memory attributes that are inconsistent with the real page that the fictitious page is an alias for. (2) Storing the machine-dependent memory attributes for amd64 and i386 as a dedicated "int" in "struct md_page" represents a compromise between space efficiency and the ease of MFCing these changes to RELENG_7. In collaboration with: jhb Approved by: re (kib)
2009-07-12 23:31:20 +00:00
int pat_mode;
};
1993-06-12 14:58:17 +00:00
struct pmap {
struct mtx pm_mtx;
1993-06-12 14:58:17 +00:00
pd_entry_t *pm_pdir; /* KVA of page directory */
MFamd64: shrink pv entries from 24 bytes to about 12 bytes. (336 pv entries per page = effectively 12.19 bytes per pv entry after overheads). Instead of using a shared UMA zone for 24 byte pv entries (two 8-byte tailq nodes, a 4 byte pointer, and a 4 byte address), we allocate a page at a time per process. This provides 336 pv entries per process (actually, per pmap address space) and eliminates one of the 8-byte tailq entries since we now can track per-process pv entries implicitly. The pointer to the pmap can be eliminated by doing address arithmetic to find the metadata on the page headers to find a single pointer shared by all 336 entries. There is an 11-int bitmap for the freelist of those 336 entries. This is mostly a mechanical conversion from amd64, except: * i386 has to allocate kvm and map the pages, amd64 has them outside of kvm * native word size is smaller, so bitmaps etc become 32 bit instead of 64 * no dump_add_page() etc stuff because they are in kvm always. * various pmap internals tweaks because pmap uses direct map on amd64 but on i386 it has to use sched_pin and temporary mappings. Also, sysctl vm.pmap.pv_entry_max and vm.pmap.shpgperproc are now dynamic sysctls. Like on amd64, i386 can now tune the pv entry limits without a recompile or reboot. This is important because of the following scenario. If you have a 1GB file (262144 pages) mmap()ed into 50 processes, that requires 13 million pv entries. At 24 bytes per pv entry, that is 314MB of ram and kvm, while at 12 bytes it is 157MB. A 157MB saving is significant. Test-run by: scottl (Thanks!)
2006-04-26 21:49:20 +00:00
TAILQ_HEAD(,pv_chunk) pm_pvchunk; /* list of mappings in pmap */
Commit the support for removing cpumask_t and replacing it directly with cpuset_t objects. That is going to offer the underlying support for a simple bump of MAXCPU and then support for number of cpus > 32 (as it is today). Right now, cpumask_t is an int, 32 bits on all our supported architecture. cpumask_t on the other side is implemented as an array of longs, and easilly extendible by definition. The architectures touched by this commit are the following: - amd64 - i386 - pc98 - arm - ia64 - XEN while the others are still missing. Userland is believed to be fully converted with the changes contained here. Some technical notes: - This commit may be considered an ABI nop for all the architectures different from amd64 and ia64 (and sparc64 in the future) - per-cpu members, which are now converted to cpuset_t, needs to be accessed avoiding migration, because the size of cpuset_t should be considered unknown - size of cpuset_t objects is different from kernel and userland (this is primirally done in order to leave some more space in userland to cope with KBI extensions). If you need to access kernel cpuset_t from the userland please refer to example in this patch on how to do that correctly (kgdb may be a good source, for example). - Support for other architectures is going to be added soon - Only MAXCPU for amd64 is bumped now The patch has been tested by sbruno and Nicholas Esborn on opteron 4 x 12 pack CPUs. More testing on big SMP is expected to came soon. pluknet tested the patch with his 8-ways on both amd64 and i386. Tested by: pluknet, sbruno, gianni, Nicholas Esborn Reviewed by: jeff, jhb, sbruno
2011-05-05 14:39:14 +00:00
cpuset_t pm_active; /* active on cpus */
1993-06-12 14:58:17 +00:00
struct pmap_statistics pm_stats; /* pmap statistics */
LIST_ENTRY(pmap) pm_list; /* List of all pmaps */
#ifdef PAE
pdpt_entry_t *pm_pdpt; /* KVA of page director pointer
table */
#endif
vm_page_t pm_root; /* spare page table pages */
1993-06-12 14:58:17 +00:00
};
typedef struct pmap *pmap_t;
#ifdef _KERNEL
extern struct pmap kernel_pmap_store;
#define kernel_pmap (&kernel_pmap_store)
#define PMAP_LOCK(pmap) mtx_lock(&(pmap)->pm_mtx)
#define PMAP_LOCK_ASSERT(pmap, type) \
mtx_assert(&(pmap)->pm_mtx, (type))
#define PMAP_LOCK_DESTROY(pmap) mtx_destroy(&(pmap)->pm_mtx)
#define PMAP_LOCK_INIT(pmap) mtx_init(&(pmap)->pm_mtx, "pmap", \
NULL, MTX_DEF | MTX_DUPOK)
#define PMAP_LOCKED(pmap) mtx_owned(&(pmap)->pm_mtx)
#define PMAP_MTX(pmap) (&(pmap)->pm_mtx)
#define PMAP_TRYLOCK(pmap) mtx_trylock(&(pmap)->pm_mtx)
#define PMAP_UNLOCK(pmap) mtx_unlock(&(pmap)->pm_mtx)
1993-06-12 14:58:17 +00:00
#endif
/*
* For each vm_page_t, there is a list of all currently valid virtual
2006-11-13 06:26:57 +00:00
* mappings of that page. An entry is a pv_entry_t, the list is pv_list.
1993-06-12 14:58:17 +00:00
*/
typedef struct pv_entry {
vm_offset_t pv_va; /* virtual address for mapping */
TAILQ_ENTRY(pv_entry) pv_list;
1993-06-12 14:58:17 +00:00
} *pv_entry_t;
MFamd64: shrink pv entries from 24 bytes to about 12 bytes. (336 pv entries per page = effectively 12.19 bytes per pv entry after overheads). Instead of using a shared UMA zone for 24 byte pv entries (two 8-byte tailq nodes, a 4 byte pointer, and a 4 byte address), we allocate a page at a time per process. This provides 336 pv entries per process (actually, per pmap address space) and eliminates one of the 8-byte tailq entries since we now can track per-process pv entries implicitly. The pointer to the pmap can be eliminated by doing address arithmetic to find the metadata on the page headers to find a single pointer shared by all 336 entries. There is an 11-int bitmap for the freelist of those 336 entries. This is mostly a mechanical conversion from amd64, except: * i386 has to allocate kvm and map the pages, amd64 has them outside of kvm * native word size is smaller, so bitmaps etc become 32 bit instead of 64 * no dump_add_page() etc stuff because they are in kvm always. * various pmap internals tweaks because pmap uses direct map on amd64 but on i386 it has to use sched_pin and temporary mappings. Also, sysctl vm.pmap.pv_entry_max and vm.pmap.shpgperproc are now dynamic sysctls. Like on amd64, i386 can now tune the pv entry limits without a recompile or reboot. This is important because of the following scenario. If you have a 1GB file (262144 pages) mmap()ed into 50 processes, that requires 13 million pv entries. At 24 bytes per pv entry, that is 314MB of ram and kvm, while at 12 bytes it is 157MB. A 157MB saving is significant. Test-run by: scottl (Thanks!)
2006-04-26 21:49:20 +00:00
/*
* pv_entries are allocated in chunks per-process. This avoids the
* need to track per-pmap assignments.
*/
#define _NPCM 11
#define _NPCPV 336
struct pv_chunk {
pmap_t pc_pmap;
TAILQ_ENTRY(pv_chunk) pc_list;
uint32_t pc_map[_NPCM]; /* bitmap; 1 = free */
uint32_t pc_spare[2];
struct pv_entry pc_pventry[_NPCPV];
};
#ifdef _KERNEL
1993-06-12 14:58:17 +00:00
extern caddr_t CADDR1;
extern pt_entry_t *CMAP1;
extern vm_paddr_t phys_avail[];
extern vm_paddr_t dump_avail[];
extern int pseflag;
extern int pgeflag;
extern char *ptvmmap; /* poor name! */
extern vm_offset_t virtual_avail;
extern vm_offset_t virtual_end;
1993-06-12 14:58:17 +00:00
Add support to the virtual memory system for configuring machine- dependent memory attributes: Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the fact that there are machine-dependent memory attributes that have nothing to do with controlling the cache's behavior. Introduce vm_object_set_memattr() for setting the default memory attributes that will be given to an object's pages. Introduce and use pmap_page_{get,set}_memattr() for getting and setting a page's machine-dependent memory attributes. Add full support for these functions on amd64 and i386 and stubs for them on the other architectures. The function pmap_page_set_memattr() is also responsible for any other machine-dependent aspects of changing a page's memory attributes, such as flushing the cache or updating the direct map. The uses include kmem_alloc_contig(), vm_page_alloc(), and the device pager: kmem_alloc_contig() can now be used to allocate kernel memory with non-default memory attributes on amd64 and i386. vm_page_alloc() and the device pager will set the memory attributes for the real or fictitious page according to the object's default memory attributes. Update the various pmap functions on amd64 and i386 that map pages to incorporate each page's memory attributes in the mapping. Notes: (1) Inherent to this design are safety features that prevent the specification of inconsistent memory attributes by different mappings on amd64 and i386. In addition, the device pager provides a warning when a device driver creates a fictitious page with memory attributes that are inconsistent with the real page that the fictitious page is an alias for. (2) Storing the machine-dependent memory attributes for amd64 and i386 as a dedicated "int" in "struct md_page" represents a compromise between space efficiency and the ease of MFCing these changes to RELENG_7. In collaboration with: jhb Approved by: re (kib)
2009-07-12 23:31:20 +00:00
#define pmap_page_get_memattr(m) ((vm_memattr_t)(m)->md.pat_mode)
#define pmap_unmapbios(va, sz) pmap_unmapdev((va), (sz))
/*
* Only the following functions or macros may be used before pmap_bootstrap()
* is called: pmap_kenter(), pmap_kextract(), pmap_kremove(), vtophys(), and
* vtopte().
*/
2007-03-17 19:42:06 +00:00
void pmap_bootstrap(vm_paddr_t);
int pmap_cache_bits(int mode, boolean_t is_pde);
int pmap_change_attr(vm_offset_t, vm_size_t, int);
void pmap_init_pat(void);
void pmap_kenter(vm_offset_t va, vm_paddr_t pa);
void *pmap_kenter_temporary(vm_paddr_t pa, int i);
void pmap_kremove(vm_offset_t);
void *pmap_mapbios(vm_paddr_t, vm_size_t);
void *pmap_mapdev(vm_paddr_t, vm_size_t);
void *pmap_mapdev_attr(vm_paddr_t, vm_size_t, int);
boolean_t pmap_page_is_mapped(vm_page_t m);
Add support to the virtual memory system for configuring machine- dependent memory attributes: Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the fact that there are machine-dependent memory attributes that have nothing to do with controlling the cache's behavior. Introduce vm_object_set_memattr() for setting the default memory attributes that will be given to an object's pages. Introduce and use pmap_page_{get,set}_memattr() for getting and setting a page's machine-dependent memory attributes. Add full support for these functions on amd64 and i386 and stubs for them on the other architectures. The function pmap_page_set_memattr() is also responsible for any other machine-dependent aspects of changing a page's memory attributes, such as flushing the cache or updating the direct map. The uses include kmem_alloc_contig(), vm_page_alloc(), and the device pager: kmem_alloc_contig() can now be used to allocate kernel memory with non-default memory attributes on amd64 and i386. vm_page_alloc() and the device pager will set the memory attributes for the real or fictitious page according to the object's default memory attributes. Update the various pmap functions on amd64 and i386 that map pages to incorporate each page's memory attributes in the mapping. Notes: (1) Inherent to this design are safety features that prevent the specification of inconsistent memory attributes by different mappings on amd64 and i386. In addition, the device pager provides a warning when a device driver creates a fictitious page with memory attributes that are inconsistent with the real page that the fictitious page is an alias for. (2) Storing the machine-dependent memory attributes for amd64 and i386 as a dedicated "int" in "struct md_page" represents a compromise between space efficiency and the ease of MFCing these changes to RELENG_7. In collaboration with: jhb Approved by: re (kib)
2009-07-12 23:31:20 +00:00
void pmap_page_set_memattr(vm_page_t m, vm_memattr_t ma);
2002-03-20 05:48:58 +00:00
void pmap_unmapdev(vm_offset_t, vm_size_t);
pt_entry_t *pmap_pte(pmap_t, vm_offset_t) __pure2;
Revive backed out pmap related changes from Feb 2002. The highlights are: - It actually works this time, honest! - Fine grained TLB shootdowns for SMP on i386. IPI's are very expensive, so try and optimize things where possible. - Introduce ranged shootdowns that can be done as a single IPI. - PG_G support for i386 - Specific-cpu targeted shootdowns. For example, there is no sense in globally purging the TLB cache for where we are stealing a page from the local unshared process on the local cpu. Use pm_active to track this. - Add some instrumentation for the tlb shootdown code. - Rip out SMP code from <machine/cpufunc.h> - Try and fix some very bogus PG_G and PG_PS interactions that were bad enough to cause vm86 bios calls to break. vm86 depended on our existing bugs and this was the cause of the VESA panics last time. - Fix the silly one-line error that caused the 'panic: bad pte' last time. - Fix a couple of other silly one-line errors that should have caused more pain than they did. Some more work is needed: - pmap_{zero,copy}_page[_idle]. These can be done without IPI's if we have a hook in cpu_switch. - The IPI handlers need some cleanup. I have a bogus %ds load that can be avoided. - APTD handling is rather bogus and appears to be a large source of global TLB IPI shootdowns for no really good reason. I see speedups of between 1.5% and ~4% on buildworlds in a while 1 loop. I expect to see a bigger difference when there is significant pageout activity or the system otherwise has memory shortages. I have backed out a few optimizations that I had been using over the last few days in order to be a little more conservative. I'll revisit these again over the next few days as the dust settles. New option: DISABLE_PG_G - In case I missed something.
2002-07-12 07:56:11 +00:00
void pmap_invalidate_page(pmap_t, vm_offset_t);
void pmap_invalidate_range(pmap_t, vm_offset_t, vm_offset_t);
void pmap_invalidate_all(pmap_t);
void pmap_invalidate_cache(void);
void pmap_invalidate_cache_pages(vm_page_t *pages, int count);
void pmap_invalidate_cache_range(vm_offset_t sva, vm_offset_t eva);
#endif /* _KERNEL */
#endif /* !LOCORE */
1993-06-12 14:58:17 +00:00
#endif /* !_MACHINE_PMAP_H_ */