d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5e7d85418b
freebsd-nq/sys/dev/patm/if_patmvar.h

521 lines
15 KiB
C
Raw Normal View History

Start each of the license/copyright comments with /*-, minor shuffle of lines
2005-01-06 01:43:34 +00:00
/*-
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
* Copyright (c) 2003
* Fraunhofer Institute for Open Communication Systems (FhG Fokus).
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Author: Hartmut Brandt <harti@freebsd.org>
*
* $FreeBSD$
*
* Driver for IDT77252 (ABR) based cards like ProSum's.
*/
/* legal values are 0, 1, 2 and 8 */
#define PATM_VPI_BITS 2
#define PATM_CFG_VPI IDT_CFG_VP2
/* receive status queue size */
#define PATM_RSQ_SIZE 512
#define PATM_CFQ_RSQ_SIZE IDT_CFG_RXQ512
/* alignment for SQ memory */
#define PATM_SQ_ALIGNMENT 8192
#define PATM_PROATM_NAME_OFFSET 060
#define PATM_PROATM_NAME "PROATM"
#define PATM_PROATM_MAC_OFFSET 044
#define PATM_IDT_MAC_OFFSET 0154
/* maximum number of packets on UBR queue */
#define PATM_DLFT_MAXQ 1000
/* maximum number of packets on other queues. This should depend on the
* traffic contract. */
#define PATM_TX_IFQLEN 100
/*
* Maximum number of DMA maps we allocate. This is the minimum that can be
* set larger via a sysctl.
* Starting number of DMA maps.
* Step for growing.
*/
#define PATM_CFG_TXMAPS_MAX 1024
#define PATM_CFG_TXMAPS_INIT 128
#define PATM_CFG_TXMAPS_STEP 128
/* percents of TST slots to keep for non-CBR traffic */
#define PATM_TST_RESERVE 2
/*
* Structure to hold TX DMA maps
*/
struct patm_txmap {
SLIST_ENTRY(patm_txmap) link;
bus_dmamap_t map;
};
/*
* Receive buffers.
*
* We manage our own external mbufs for small receive buffers for two reasons:
* the card may consume a rather large number of buffers. Mapping each buffer
* would consume a lot of iospace on sparc64. Also the card allows us to set
* a 32-bit handle for identification of the buffers. On a 64-bit system this
* requires us to use a mapping between buffers and handles.
*
* For large buffers we use mbuf clusters directly. We track these by using
* an array of pointers (lbufs) to special structs and a free list of these
* structs.
*
* For AAL0 cell we use FBQ2 and make the 1 cell long.
*/
/*
* Define the small buffer chunk so that we have at least 16 byte free
* at the end of the chunk and that there is an integral number of chunks
* in a page.
*/
#define SMBUF_PAGE_SIZE 16384 /* 16k pages */
#define SMBUF_MAX_PAGES 64 /* maximum number of pages */
#define SMBUF_CHUNK_SIZE 256 /* 256 bytes per chunk */
#define SMBUF_CELLS 5
#define SMBUF_SIZE (SMBUF_CELLS * 48)
#define SMBUF_THRESHOLD 9 /* 9/16 of queue size */
#define SMBUF_NI_THRESH 3
#define SMBUF_CI_THRESH 1
#define VMBUF_PAGE_SIZE 16384 /* 16k pages */
#define VMBUF_MAX_PAGES 16 /* maximum number of pages */
#define VMBUF_CHUNK_SIZE 64 /* 64 bytes per chunk */
#define VMBUF_CELLS 1
#define VMBUF_SIZE (VMBUF_CELLS * 48)
#define VMBUF_THRESHOLD 15 /* 15/16 of size */
#define SMBUF_OFFSET (SMBUF_CHUNK_SIZE - 8 - SMBUF_SIZE)
#define VMBUF_OFFSET 0
#define MBUF_SHANDLE 0x00000000
#define MBUF_LHANDLE 0x80000000
#define MBUF_VHANDLE 0x40000000
#define MBUF_HMASK 0x3fffffff
/*
* Large buffers
*
* The problem with these is the maximum count. When the card assembles
* a AAL5 pdu it moves a buffer from the FBQ to the VC. This frees space
* in the FBQ, put the buffer may pend on the card for an unlimited amount
* of time (we don't idle connections). This means that the upper limit
* on buffers on the card may be (no-of-open-vcs + FBQ_SIZE). Because
* this is far too much, make this a tuneable. We could also make
* this dynamic by allocating pages of several lbufs at once during run time.
*/
#define LMBUF_MAX (IDT_FBQ_SIZE * 2)
#define LMBUF_CELLS (MCLBYTES / 48) /* 42 cells = 2048 byte */
#define LMBUF_SIZE (LMBUF_CELLS * 48)
#define LMBUF_THRESHOLD 9 /* 9/16 of queue size */
#define LMBUF_OFFSET (MCLBYTES - LMBUF_SIZE)
#define LMBUF_NI_THRESH 3
#define LMBUF_CI_THRESH 1
#define LMBUF_HANDLE 0x80000000
struct lmbuf {
SLIST_ENTRY(lmbuf) link; /* free list link */
bus_dmamap_t map; /* DMA map */
u_int handle; /* this is the handle index */
struct mbuf *m; /* the current mbuf */
bus_addr_t phy; /* phy addr */
};
#define PATM_CID(SC, VPI, VCI) \
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
(((VPI) << IFP2IFATM((SC)->ifp)->mib.vci_bits) | (VCI))
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
/*
* Internal driver statistics
*/
struct patm_stats {
uint32_t raw_cells;
uint32_t raw_no_vcc;
uint32_t raw_no_buf;
uint32_t tx_qfull;
uint32_t tx_out_of_tbds;
uint32_t tx_out_of_maps;
uint32_t tx_load_err;
};
/*
* These are allocated as DMA able memory
*/
struct patm_scd {
struct idt_tbd scq[IDT_SCQ_SIZE];
LIST_ENTRY(patm_scd) link; /* all active SCDs */
uint32_t sram; /* SRAM address */
bus_addr_t phy; /* physical address */
bus_dmamap_t map; /* DMA map */
u_int tail; /* next free entry for host */
int space; /* number of free entries (minus one) */
u_int slots; /* CBR slots allocated */
uint8_t tag; /* next tag for TSI */
uint8_t last_tag; /* last tag checked in interrupt */
uint8_t num_on_card; /* number of PDUs on tx queue */
uint8_t lacr; /* LogACR value */
uint8_t init_er; /* LogER value */
struct ifqueue q; /* queue of packets */
struct mbuf *on_card[IDT_TSQE_TAG_SPACE];
};
/*
* Per-VCC data
*/
struct patm_vcc {
struct atmio_vcc vcc; /* caller's parameters */
void *rxhand; /* NATM handle */
u_int vflags; /* open and other flags */
uint32_t ipackets; /* packets received */
uint32_t opackets; /* packets sent */
uint64_t ibytes; /* bytes received */
uint64_t obytes; /* bytes sent */
Make open channels persist across ifconfig down and up. All channels that are not currently closing when the interface is configured down will be brough up as soon as the interface is configured up.
2003-08-07 14:30:58 +00:00
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
struct mbuf *chain; /* currently received chain */
struct mbuf *last; /* end of chain */
u_int cid; /* index */
u_int cps; /* last ABR cps */
struct patm_scd *scd;
};
#define PATM_VCC_TX_OPEN 0x0001
#define PATM_VCC_RX_OPEN 0x0002
#define PATM_VCC_TX_CLOSING 0x0004
#define PATM_VCC_RX_CLOSING 0x0008
#define PATM_VCC_OPEN 0x000f /* all the above */
#define PATM_RAW_CELL 0x0000 /* 53 byte cells */
#define PATM_RAW_NOHEC 0x0100 /* 52 byte cells */
#define PATM_RAW_CS 0x0200 /* 64 byte cell stream */
#define PATM_RAW_FORMAT 0x0300 /* format mask */
/*
* Per adapter data
*/
struct patm_softc {
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
struct ifnet *ifp; /* common ATM stuff */
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
struct mtx mtx; /* lock */
struct ifmedia media; /* media */
device_t dev; /* device */
struct resource * memres; /* memory resource */
bus_space_handle_t memh; /* handle */
bus_space_tag_t memt; /* ... and tag */
int irqid; /* resource id */
struct resource * irqres; /* resource */
void * ih; /* interrupt handle */
struct utopia utopia; /* phy state */
const struct idt_mmap *mmap; /* SRAM memory map */
u_int flags; /* see below */
u_int revision; /* chip revision */
/* DMAable status queue memory */
size_t sq_size; /* size of memory area */
bus_dma_tag_t sq_tag; /* DMA tag */
bus_dmamap_t sq_map; /* map */
bus_addr_t tsq_phy; /* phys addr. */
struct idt_tsqe *tsq; /* transmit status queue */
struct idt_tsqe *tsq_next; /* last processed entry */
struct idt_rsqe *rsq; /* receive status queue */
bus_addr_t rsq_phy; /* phys addr. */
u_int rsq_last; /* last processed entry */
struct idt_rawhnd *rawhnd; /* raw cell handle */
bus_addr_t rawhnd_phy; /* phys addr. */
/* TST */
u_int tst_state; /* active TST and others */
u_int tst_jump[2]; /* address of the jumps */
u_int tst_base[2]; /* base address of TST */
u_int *tst_soft; /* soft TST */
struct mtx tst_lock;
struct callout tst_callout;
u_int tst_free; /* free slots */
u_int tst_reserve; /* non-CBR reserve */
u_int bwrem; /* remaining bandwith */
/* sysctl support */
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
/* EEPROM contents */
uint8_t eeprom[256];
/* large buffer mapping */
bus_dma_tag_t lbuf_tag; /* DMA tag */
u_int lbuf_max; /* maximum number */
struct lmbuf *lbufs; /* array for indexing */
SLIST_HEAD(,lmbuf) lbuf_free_list; /* free list */
/* small buffer handling */
bus_dma_tag_t sbuf_tag; /* DMA tag */
struct mbpool *sbuf_pool; /* pool */
struct mbpool *vbuf_pool; /* pool */
/* raw cell queue */
struct lmbuf *rawh; /* current header buf */
u_int rawi; /* cell index into buffer */
/* statistics */
struct patm_stats stats; /* statistics */
/* Vccs */
struct patm_vcc **vccs; /* channel pointer array */
u_int vccs_open; /* number of open channels */
uma_zone_t vcc_zone;
struct cv vcc_cv;
/* SCDs */
uint32_t scd_free; /* SRAM of first free SCD */
bus_dma_tag_t scd_tag;
struct patm_scd *scd0;
LIST_HEAD(, patm_scd) scd_list; /* list of all active SCDs */
/* Tx */
bus_dma_tag_t tx_tag; /* for transmission */
SLIST_HEAD(, patm_txmap) tx_maps_free; /* free maps */
u_int tx_nmaps; /* allocated maps */
u_int tx_maxmaps; /* maximum number */
struct uma_zone *tx_mapzone; /* zone for maps */
#ifdef PATM_DEBUG
/* debugging */
u_int debug;
#endif
};
/* flags */
#define PATM_25M 0x0001 /* 25MBit card */
#define PATM_SBUFW 0x0002 /* warned */
#define PATM_VBUFW 0x0004 /* warned */
#define PATM_UNASS 0x0010 /* unassigned cells */
#define PATM_CLR 0x0007 /* clear on stop */
/* tst - uses unused fields */
#define TST_BOTH 0x03000000
#define TST_CH0 0x01000000
#define TST_CH1 0x02000000
/* tst_state */
#define TST_ACT1 0x0001 /* active TST */
#define TST_PENDING 0x0002 /* need update */
#define TST_WAIT 0x0004 /* wait fo jump */
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
#define patm_printf(SC, ...) if_printf((SC)->ifp, __VA_ARGS__);
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
#ifdef PATM_DEBUG
/*
* Debugging
*/
enum {
DBG_ATTACH = 0x0001, /* attaching the card */
DBG_INTR = 0x0002, /* interrupts */
DBG_REG = 0x0004, /* register access */
DBG_SRAM = 0x0008, /* SRAM access */
DBG_PHY = 0x0010, /* PHY access */
DBG_IOCTL = 0x0020, /* ioctl */
DBG_FREEQ = 0x0040, /* free bufq supply */
DBG_VCC = 0x0080, /* open/close */
DBG_TX = 0x0100, /* transmission */
DBG_TST = 0x0200, /* TST */
DBG_ALL = 0xffff
};
#define patm_debug(SC, FLAG, ...) do { \
if((SC)->debug & DBG_##FLAG) { \
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
if_printf((SC)->ifp, "%s: ", __func__); \
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
printf(__VA_ARGS__); \
printf("\n"); \
} \
} while (0)
#else
#define patm_debug(SC, FLAG, ...) do { } while (0)
#endif
/* start output */
void patm_start(struct ifnet *);
/* ioctl handler */
int patm_ioctl(struct ifnet *, u_long, caddr_t);
/* start the interface */
void patm_init(void *);
/* start the interface with the lock held */
void patm_initialize(struct patm_softc *);
/* stop the interface */
void patm_stop(struct patm_softc *);
/* software reset of interface */
void patm_reset(struct patm_softc *);
/* interrupt handler */
void patm_intr(void *);
/* check RSQ */
void patm_intr_rsq(struct patm_softc *sc);
Make open channels persist across ifconfig down and up. All channels that are not currently closing when the interface is configured down will be brough up as soon as the interface is configured up.
2003-08-07 14:30:58 +00:00
/* enable the vcc */
void patm_load_vc(struct patm_softc *sc, struct patm_vcc *vcc, int reload);
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
/* close the given vcc for transmission */
void patm_tx_vcc_close(struct patm_softc *, struct patm_vcc *);
/* close the given vcc for receive */
void patm_rx_vcc_close(struct patm_softc *, struct patm_vcc *);
/* transmission side finally closed */
void patm_tx_vcc_closed(struct patm_softc *, struct patm_vcc *);
/* receive side finally closed */
void patm_rx_vcc_closed(struct patm_softc *, struct patm_vcc *);
/* vcc closed */
void patm_vcc_closed(struct patm_softc *, struct patm_vcc *);
/* check if we can open this one */
int patm_tx_vcc_can_open(struct patm_softc *, struct patm_vcc *);
/* check if we can open this one */
int patm_rx_vcc_can_open(struct patm_softc *, struct patm_vcc *);
/* open it */
void patm_tx_vcc_open(struct patm_softc *, struct patm_vcc *);
/* open it */
void patm_rx_vcc_open(struct patm_softc *, struct patm_vcc *);
/* receive packet */
void patm_rx(struct patm_softc *, struct idt_rsqe *);
/* packet transmitted */
void patm_tx(struct patm_softc *, u_int, u_int);
/* VBR connection went idle */
void patm_tx_idle(struct patm_softc *, u_int);
/* allocate an SCQ */
struct patm_scd *patm_scd_alloc(struct patm_softc *);
/* free an SCD */
void patm_scd_free(struct patm_softc *sc, struct patm_scd *scd);
/* setup SCD in SRAM */
void patm_scd_setup(struct patm_softc *sc, struct patm_scd *scd);
/* setup TCT entry in SRAM */
void patm_tct_setup(struct patm_softc *, struct patm_scd *, struct patm_vcc *);
/* free a large buffer */
void patm_lbuf_free(struct patm_softc *sc, struct lmbuf *b);
/* Process the raw cell at the given address */
void patm_rx_raw(struct patm_softc *sc, u_char *cell);
/* load a one segment DMA map */
void patm_load_callback(void *, bus_dma_segment_t *, int, int);
/* network operation register access */
static __inline uint32_t
patm_nor_read(struct patm_softc *sc, u_int reg)
{
uint32_t val;
val = bus_space_read_4(sc->memt, sc->memh, reg);
patm_debug(sc, REG, "reg(0x%x)=%04x", reg, val);
return (val);
}
static __inline void
patm_nor_write(struct patm_softc *sc, u_int reg, uint32_t val)
{
patm_debug(sc, REG, "reg(0x%x)=%04x", reg, val);
bus_space_write_4(sc->memt, sc->memh, reg, val);
}
/* Execute command */
static __inline void
patm_cmd_wait(struct patm_softc *sc)
{
while (patm_nor_read(sc, IDT_NOR_STAT) & IDT_STAT_CMDBZ)
;
}
static __inline void
patm_cmd_exec(struct patm_softc *sc, uint32_t cmd)
{
patm_cmd_wait(sc);
patm_nor_write(sc, IDT_NOR_CMD, cmd);
}
/* Read/write SRAM at the given word address. */
static __inline uint32_t
patm_sram_read(struct patm_softc *sc, u_int addr)
{
uint32_t val;
patm_cmd_exec(sc, IDT_MKCMD_RSRAM(addr));
patm_cmd_wait(sc);
val = patm_nor_read(sc, IDT_NOR_D0);
patm_debug(sc, SRAM, "read %04x=%08x", addr, val);
return (val);
}
static __inline void
patm_sram_write(struct patm_softc *sc, u_int addr, uint32_t val)
{
patm_debug(sc, SRAM, "write %04x=%08x", addr, val);
patm_cmd_wait(sc);
patm_nor_write(sc, IDT_NOR_D0, val);
patm_cmd_exec(sc, IDT_MKCMD_WSRAM(addr, 0));
}
static __inline void
patm_sram_write4(struct patm_softc *sc, u_int addr, uint32_t v0, uint32_t v1,
uint32_t v2, uint32_t v3)
{
patm_debug(sc, SRAM, "write %04x=%08x,%08x,%08x,%08x",
addr, v0, v1, v2, v3);
patm_cmd_wait(sc);
patm_nor_write(sc, IDT_NOR_D0, v0);
patm_nor_write(sc, IDT_NOR_D1, v1);
patm_nor_write(sc, IDT_NOR_D2, v2);
patm_nor_write(sc, IDT_NOR_D3, v3);
patm_cmd_exec(sc, IDT_MKCMD_WSRAM(addr, 3));
}
#define LEGAL_VPI(SC, VPI) \
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
(((VPI) & ~((1 << IFP2IFATM((SC)->ifp)->mib.vpi_bits) - 1)) == 0)
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
#define LEGAL_VCI(SC, VCI) \
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
(((VCI) & ~((1 << IFP2IFATM((SC)->ifp)->mib.vci_bits) - 1)) == 0)
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
extern const uint32_t patm_rtables155[];
extern const uint32_t patm_rtables25[];
extern const u_int patm_rtables_size;
extern const u_int patm_rtables_ntab;
Reference in New Issue Copy Permalink