d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
607ccc8676
freebsd-nq/sys/kern/subr_autoconf.c

231 lines
6.7 KiB
C
Raw Normal View History

/* -> /*- for copyright notices, minor format tweaks as necessary
2005-01-06 23:35:40 +00:00
/*-
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)subr_autoconf.c 8.1 (Berkeley) 6/10/93
*
*/
Use __FBSDID().
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add DDB "show conifhk" command, which lists hooks currently waiting for completion in run_interrupt_driven_config_hooks(). This is helpful when trying to figure out which device drivers have gone into la-la land during boot-time autoconfiguration. MFC after: 3 days
2008-07-19 12:12:54 +00:00
#include "opt_ddb.h"
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
#include <sys/kernel.h>
Rather than simply waiting silently and indefinitely for all interrupt-driven configuration handlers to complete, print out a diagnostic message every 60 second indicating which handlers are still running. Do this at most 5 times per run so as to avoid scrolling out any useful information from the kernel message buffer. The interval of 60 seconds was selected based on a best guess as to the nature of "long enough" and may want to be tuned higher or lower depending on real-world tolerances. MFC after: 3 days Discussed with: scottl
2008-07-19 19:08:35 +00:00
#include <sys/linker.h>
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
#include <sys/systm.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Autoconfiguration subroutines.
*/
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
/*
* "Interrupt driven config" functions.
*/
Back out the previous change to the queue(3) interface. It was not discussed and should probably not happen. Requested by: msmith and others
2000-05-26 02:09:24 +00:00
static TAILQ_HEAD(, intr_config_hook) intr_config_hook_list =
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
TAILQ_HEAD_INITIALIZER(intr_config_hook_list);
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
static struct intr_config_hook *next_to_notify;
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
static struct mtx intr_config_hook_lock;
MTX_SYSINIT(intr_config_hook, &intr_config_hook_lock, "intr config", MTX_DEF);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
/* ARGSUSED */
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
static void run_interrupt_driven_config_hooks(void);
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
Rather than simply waiting silently and indefinitely for all interrupt-driven configuration handlers to complete, print out a diagnostic message every 60 second indicating which handlers are still running. Do this at most 5 times per run so as to avoid scrolling out any useful information from the kernel message buffer. The interval of 60 seconds was selected based on a best guess as to the nature of "long enough" and may want to be tuned higher or lower depending on real-world tolerances. MFC after: 3 days Discussed with: scottl
2008-07-19 19:08:35 +00:00
/*
* If we wait too long for an interrupt-driven config hook to return, print
* a diagnostic.
*/
#define WARNING_INTERVAL_SECS 60
static void
run_interrupt_driven_config_hooks_warning(int warned)
{
struct intr_config_hook *hook_entry;
char namebuf[64];
long offset;
If run_interrupt_driven_config_hooks() waits 360 seconds and INVARIANTS is compiled into the kernel, then panic. MFC after: 3 days Discussed with: scottl
2008-07-21 20:50:49 +00:00
if (warned < 6) {
printf("run_interrupt_driven_hooks: still waiting after %d "
"seconds for", warned * WARNING_INTERVAL_SECS);
TAILQ_FOREACH(hook_entry, &intr_config_hook_list, ich_links) {
if (linker_search_symbol_name(
(caddr_t)hook_entry->ich_func, namebuf,
sizeof(namebuf), &offset) == 0)
printf(" %s", namebuf);
else
printf(" %p", hook_entry->ich_func);
}
printf("\n");
Rather than simply waiting silently and indefinitely for all interrupt-driven configuration handlers to complete, print out a diagnostic message every 60 second indicating which handlers are still running. Do this at most 5 times per run so as to avoid scrolling out any useful information from the kernel message buffer. The interval of 60 seconds was selected based on a best guess as to the nature of "long enough" and may want to be tuned higher or lower depending on real-world tolerances. MFC after: 3 days Discussed with: scottl
2008-07-19 19:08:35 +00:00
}
If run_interrupt_driven_config_hooks() waits 360 seconds and INVARIANTS is compiled into the kernel, then panic. MFC after: 3 days Discussed with: scottl
2008-07-21 20:50:49 +00:00
KASSERT(warned < 6,
("run_interrupt_driven_config_hooks: waited too long"));
Rather than simply waiting silently and indefinitely for all interrupt-driven configuration handlers to complete, print out a diagnostic message every 60 second indicating which handlers are still running. Do this at most 5 times per run so as to avoid scrolling out any useful information from the kernel message buffer. The interval of 60 seconds was selected based on a best guess as to the nature of "long enough" and may want to be tuned higher or lower depending on real-world tolerances. MFC after: 3 days Discussed with: scottl
2008-07-19 19:08:35 +00:00
}
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
static void
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
run_interrupt_driven_config_hooks()
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
{
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
static int running;
struct intr_config_hook *hook_entry;
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_lock(&intr_config_hook_lock);
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
/*
* If hook processing is already active, any newly
* registered hooks will eventually be notified.
* Let the currently running session issue these
* notifications.
*/
if (running != 0) {
mtx_unlock(&intr_config_hook_lock);
return;
}
running = 1;
while (next_to_notify != NULL) {
hook_entry = next_to_notify;
next_to_notify = TAILQ_NEXT(hook_entry, ich_links);
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_unlock(&intr_config_hook_lock);
Change explicit use of the queue fields into use of the definitions in queue.h. Change the name of two variables for consistency. Reviewed-By: peter
1999-09-26 18:48:53 +00:00
(*hook_entry->ich_func)(hook_entry->ich_arg);
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_lock(&intr_config_hook_lock);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
}
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
running = 0;
mtx_unlock(&intr_config_hook_lock);
}
static void
boot_run_interrupt_driven_config_hooks(void *dummy)
{
int warned;
run_interrupt_driven_config_hooks();
/* Block boot processing until all hooks are disestablished. */
mtx_lock(&intr_config_hook_lock);
Rather than simply waiting silently and indefinitely for all interrupt-driven configuration handlers to complete, print out a diagnostic message every 60 second indicating which handlers are still running. Do this at most 5 times per run so as to avoid scrolling out any useful information from the kernel message buffer. The interval of 60 seconds was selected based on a best guess as to the nature of "long enough" and may want to be tuned higher or lower depending on real-world tolerances. MFC after: 3 days Discussed with: scottl
2008-07-19 19:08:35 +00:00
warned = 0;
Change explicit use of the queue fields into use of the definitions in queue.h. Change the name of two variables for consistency. Reviewed-By: peter
1999-09-26 18:48:53 +00:00
while (!TAILQ_EMPTY(&intr_config_hook_list)) {
Rather than simply waiting silently and indefinitely for all interrupt-driven configuration handlers to complete, print out a diagnostic message every 60 second indicating which handlers are still running. Do this at most 5 times per run so as to avoid scrolling out any useful information from the kernel message buffer. The interval of 60 seconds was selected based on a best guess as to the nature of "long enough" and may want to be tuned higher or lower depending on real-world tolerances. MFC after: 3 days Discussed with: scottl
2008-07-19 19:08:35 +00:00
if (msleep(&intr_config_hook_list, &intr_config_hook_lock,
PCONFIG, "conifhk", WARNING_INTERVAL_SECS * hz) ==
If run_interrupt_driven_config_hooks() waits 360 seconds and INVARIANTS is compiled into the kernel, then panic. MFC after: 3 days Discussed with: scottl
2008-07-21 20:50:49 +00:00
EWOULDBLOCK) {
Rather than simply waiting silently and indefinitely for all interrupt-driven configuration handlers to complete, print out a diagnostic message every 60 second indicating which handlers are still running. Do this at most 5 times per run so as to avoid scrolling out any useful information from the kernel message buffer. The interval of 60 seconds was selected based on a best guess as to the nature of "long enough" and may want to be tuned higher or lower depending on real-world tolerances. MFC after: 3 days Discussed with: scottl
2008-07-19 19:08:35 +00:00
mtx_unlock(&intr_config_hook_lock);
warned++;
run_interrupt_driven_config_hooks_warning(warned);
mtx_lock(&intr_config_hook_lock);
}
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
}
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_unlock(&intr_config_hook_lock);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
}
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
SYSINIT(intr_config_hooks, SI_SUB_INT_CONFIG_HOOKS, SI_ORDER_FIRST,
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
boot_run_interrupt_driven_config_hooks, NULL);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
/*
* Register a hook that will be called after "cold"
* autoconfiguration is complete and interrupts can
* be used to complete initialization.
*/
int
Prefer ANSI function definitions to K&R ones.
2009-02-03 07:52:07 +00:00
config_intrhook_establish(struct intr_config_hook *hook)
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
{
struct intr_config_hook *hook_entry;
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_lock(&intr_config_hook_lock);
TAILQ_FOREACH(hook_entry, &intr_config_hook_list, ich_links)
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
if (hook_entry == hook)
break;
if (hook_entry != NULL) {
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_unlock(&intr_config_hook_lock);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
printf("config_intrhook_establish: establishing an "
"already established hook.\n");
return (1);
}
TAILQ_INSERT_TAIL(&intr_config_hook_list, hook, ich_links);
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
if (next_to_notify == NULL)
next_to_notify = hook;
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_unlock(&intr_config_hook_lock);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
if (cold == 0)
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
/*
* XXX Call from a task since not all drivers expect
* to be re-entered at the time a hook is established.
*/
Well folks, this is it - The second stage of the removal for build support for LKM's..
1999-04-17 08:36:07 +00:00
/* XXX Sufficient for modules loaded after initial config??? */
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
run_interrupt_driven_config_hooks();
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
return (0);
}
void
Prefer ANSI function definitions to K&R ones.
2009-02-03 07:52:07 +00:00
config_intrhook_disestablish(struct intr_config_hook *hook)
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
{
struct intr_config_hook *hook_entry;
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_lock(&intr_config_hook_lock);
TAILQ_FOREACH(hook_entry, &intr_config_hook_list, ich_links)
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
if (hook_entry == hook)
break;
if (hook_entry == NULL)
panic("config_intrhook_disestablish: disestablishing an "
"unestablished hook");
Allow interrupt driven config hooks to be registered from config hook callbacks. Interrupt driven configuration hooks serve two purposes: they are a mechanism for registering for a callback that is invoked once interrupt services are available, and they hold off root device selection so long as any configuration hooks are still active. Before this change, it was not possible to safely register additional hooks from the context of a configuration hook callback. The need for this feature arises when interrupts are required to discover new devices (e.g. access to the XenStore to find para-virtualized devices) which in turn also require the ability to hold off root device selection until some lengthy, interrupt driven, configuration task has completed (e.g. Xen front/back device driver negotiation). More specifically, the mutex protecting the list of active configuration hooks is never held during a callback, and static information is used to ensure proper ordering and only a single callback to each hook even when faced with registration or removal of a hook during an active run. Sponsored by: Spectra Logic Corporation MFC after: 1 week.
2010-08-12 19:50:40 +00:00
if (next_to_notify == hook)
next_to_notify = TAILQ_NEXT(hook, ich_links);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
TAILQ_REMOVE(&intr_config_hook_list, hook, ich_links);
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
/* Wakeup anyone watching the list */
wakeup(&intr_config_hook_list);
Add a mutex to protect the list of interrupt config hooks. We do assume that the only remove hook operation that can occur while processing the hooks is to remove the currently executing hook. This should be safe as the existing code has assumed this already for a long time now. Reviewed by: scottl MFC after: 1 week
2006-07-19 18:53:56 +00:00
mtx_unlock(&intr_config_hook_lock);
init_main.c subr_autoconf.c: Add support for "interrupt driven configuration hooks". A component of the kernel can register a hook, most likely during auto-configuration, and receive a callback once interrupt services are available. This callback will occur before the root and dump devices are configured, so the configuration task can affect the selection of those two devices or complete any tasks that need to be performed prior to launching init. System boot is posponed so long as a hook is registered. The hook owner is responsible for removing the hook once their task is complete or the system boot can continue. kern_acct.c kern_clock.c kern_exit.c kern_synch.c kern_time.c: Change the interface and implementation for the kernel callout service. The new implemntaion is based on the work of Adam M. Costello and George Varghese, published in a technical report entitled "Redesigning the BSD Callout and Timer Facilities". The interface used in FreeBSD is a little different than the one outlined in the paper. The new function prototypes are: struct callout_handle timeout(void (*func)(void *), void *arg, int ticks); void untimeout(void (*func)(void *), void *arg, struct callout_handle handle); If a client wishes to remove a timeout, it must store the callout_handle returned by timeout and pass it to untimeout. The new implementation gives 0(1) insert and removal of callouts making this interface scale well even for applications that keep 100s of callouts outstanding. See the updated timeout.9 man page for more details.
1997-09-21 22:00:25 +00:00
}
Add DDB "show conifhk" command, which lists hooks currently waiting for completion in run_interrupt_driven_config_hooks(). This is helpful when trying to figure out which device drivers have gone into la-la land during boot-time autoconfiguration. MFC after: 3 days
2008-07-19 12:12:54 +00:00
#ifdef DDB
#include <ddb/ddb.h>
DB_SHOW_COMMAND(conifhk, db_show_conifhk)
{
struct intr_config_hook *hook_entry;
char namebuf[64];
long offset;
TAILQ_FOREACH(hook_entry, &intr_config_hook_list, ich_links) {
if (linker_ddb_search_symbol_name(
(caddr_t)hook_entry->ich_func, namebuf, sizeof(namebuf),
&offset) == 0) {
db_printf("hook: %p at %s+%#lx arg: %p\n",
hook_entry->ich_func, namebuf, offset,
hook_entry->ich_arg);
} else {
db_printf("hook: %p at ??+?? arg %p\n",
hook_entry->ich_func, hook_entry->ich_arg);
}
}
}
#endif /* DDB */
Reference in New Issue Copy Permalink