d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
62ca2477d8
freebsd-nq/sys/kern/subr_witness.c

1343 lines
31 KiB
C
Raw Normal View History

Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*-
* Copyright (c) 1998 Berkeley Software Design, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Berkeley Software Design Inc's name may not be used to endorse or
* promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY BERKELEY SOFTWARE DESIGN INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BERKELEY SOFTWARE DESIGN INC BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from BSDI $Id: mutex_witness.c,v 1.1.2.20 2000/04/27 03:10:27 cp Exp $
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
* and BSDI $Id: synch_machdep.c,v 2.3.2.39 2000/04/27 03:10:25 cp Exp $
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
* $FreeBSD$
*/
/*
* Main Entry: witness
* Pronunciation: 'wit-n&s
* Function: noun
* Etymology: Middle English witnesse, from Old English witnes knowledge,
* testimony, witness, from 2wit
* Date: before 12th century
* 1 : attestation of a fact or event : TESTIMONY
* 2 : one that gives evidence; specifically : one who testifies in
* a cause or before a judicial tribunal
* 3 : one asked to be present at a transaction so as to be able to
* testify to its having taken place
* 4 : one who has personal knowledge of something
* 5 a : something serving as evidence or proof : SIGN
* b : public affirmation by word or example of usually
* religious faith or conviction <the heroic witness to divine
* life -- Pilot>
* 6 capitalized : a member of the Jehovah's Witnesses
*/
Include the right headers to get the DDB #define and the db_active variable.
2000-11-15 22:08:16 +00:00
#include "opt_ddb.h"
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#include "opt_witness.h"
Move the #define of _KERN_MUTEX_C_ so that it's before any system headers are included. System headers can include sys/mutex.h and then certain macros do not get defined. Reviewed by: jake
2000-11-26 21:14:17 +00:00
/*
* Cause non-inlined mtx_*() to be compiled.
* Must be defined early because other system headers may include mutex.h.
*/
#define _KERN_MUTEX_C_
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/param.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/proc.h>
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#include <sys/sysctl.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/systm.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <sys/vmmeter.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <sys/ktr.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <machine/atomic.h>
#include <machine/bus.h>
#include <machine/clock.h>
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#include <machine/cpu.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
Include the right headers to get the DDB #define and the db_active variable.
2000-11-15 22:08:16 +00:00
#include <ddb/ddb.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <sys/mutex.h>
/*
* Machine independent bits of the mutex implementation
*/
/* All mutexes in system (used for debug/panic) */
#ifdef MUTEX_DEBUG
static struct mtx_debug all_mtx_debug = { NULL, {NULL, NULL}, NULL, 0,
"All mutexes queue head" };
static struct mtx all_mtx = { MTX_UNOWNED, 0, 0, &all_mtx_debug,
TAILQ_HEAD_INITIALIZER(all_mtx.mtx_blocked),
{ NULL, NULL }, &all_mtx, &all_mtx };
#else /* MUTEX_DEBUG */
static struct mtx all_mtx = { MTX_UNOWNED, 0, 0, "All mutexes queue head",
TAILQ_HEAD_INITIALIZER(all_mtx.mtx_blocked),
{ NULL, NULL }, &all_mtx, &all_mtx };
#endif /* MUTEX_DEBUG */
static int mtx_cur_cnt;
static int mtx_max_cnt;
void _mtx_enter_giant_def(void);
void _mtx_exit_giant_def(void);
static void propagate_priority(struct proc *) __unused;
#define mtx_unowned(m) ((m)->mtx_lock == MTX_UNOWNED)
#define mtx_owner(m) (mtx_unowned(m) ? NULL \
: (struct proc *)((m)->mtx_lock & MTX_FLAGMASK))
#define RETIP(x) *(((uintptr_t *)(&x)) - 1)
#define SET_PRIO(p, pri) (p)->p_priority = (pri)
/*
* XXX Temporary, for use from assembly language
*/
void
_mtx_enter_giant_def(void)
{
mtx_enter(&Giant, MTX_DEF);
}
void
_mtx_exit_giant_def(void)
{
mtx_exit(&Giant, MTX_DEF);
}
static void
propagate_priority(struct proc *p)
{
int pri = p->p_priority;
struct mtx *m = p->p_blocked;
for (;;) {
struct proc *p1;
p = mtx_owner(m);
if (p == NULL) {
/*
* This really isn't quite right. Really
* ought to bump priority of process that
* next acquires the mutex.
*/
MPASS(m->mtx_lock == MTX_CONTESTED);
return;
}
MPASS(p->p_magic == P_MAGIC);
if (p->p_priority <= pri)
return;
/*
* If lock holder is actually running, just bump priority.
*/
if (TAILQ_NEXT(p, p_procq) == NULL) {
MPASS(p->p_stat == SRUN || p->p_stat == SZOMB);
SET_PRIO(p, pri);
return;
}
/*
* If on run queue move to new run queue, and
* quit.
*/
if (p->p_stat == SRUN) {
MPASS(p->p_blocked == NULL);
remrunqueue(p);
SET_PRIO(p, pri);
setrunqueue(p);
return;
}
/*
* If we aren't blocked on a mutex, give up and quit.
*/
if (p->p_stat != SMTX) {
printf(
"XXX: process %d(%s):%d holds %s but isn't blocked on a mutex\n",
p->p_pid, p->p_comm, p->p_stat, m->mtx_description);
return;
}
/*
* Pick up the mutex that p is blocked on.
*/
m = p->p_blocked;
MPASS(m != NULL);
printf("XXX: process %d(%s) is blocked on %s\n", p->p_pid,
p->p_comm, m->mtx_description);
/*
* Check if the proc needs to be moved up on
* the blocked chain
*/
if ((p1 = TAILQ_PREV(p, rq, p_procq)) == NULL ||
p1->p_priority <= pri) {
if (p1)
printf(
"XXX: previous process %d(%s) has higher priority\n",
p->p_pid, p->p_comm);
else
printf("XXX: process at head of run queue\n");
continue;
}
/*
* Remove proc from blocked chain
*/
TAILQ_REMOVE(&m->mtx_blocked, p, p_procq);
TAILQ_FOREACH(p1, &m->mtx_blocked, p_procq) {
MPASS(p1->p_magic == P_MAGIC);
if (p1->p_priority > pri)
break;
}
if (p1)
TAILQ_INSERT_BEFORE(p1, p, p_procq);
else
TAILQ_INSERT_TAIL(&m->mtx_blocked, p, p_procq);
CTR4(KTR_LOCK,
"propagate priority: p 0x%p moved before 0x%p on [0x%p] %s",
p, p1, m, m->mtx_description);
}
}
void
mtx_enter_hard(struct mtx *m, int type, int saveintr)
{
struct proc *p = CURPROC;
KASSERT(p != NULL, ("curproc is NULL in mutex"));
switch (type) {
case MTX_DEF:
if ((m->mtx_lock & MTX_FLAGMASK) == (uintptr_t)p) {
m->mtx_recurse++;
atomic_set_ptr(&m->mtx_lock, MTX_RECURSE);
CTR1(KTR_LOCK, "mtx_enter: 0x%p recurse", m);
return;
}
CTR3(KTR_LOCK, "mtx_enter: 0x%p contested (lock=%p) [0x%p]",
Quite some warnings.
2000-10-25 04:37:54 +00:00
m, (void *)m->mtx_lock, (void *)RETIP(m));
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
while (!_obtain_lock(m, p)) {
Doh. Fix a 64-bit-ism by using uintptr_t for a temporary lock variable instead of int.
2000-10-20 20:24:40 +00:00
uintptr_t v;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
struct proc *p1;
mtx_enter(&sched_lock, MTX_SPIN | MTX_RLIKELY);
/*
* check if the lock has been released while
* waiting for the schedlock.
*/
if ((v = m->mtx_lock) == MTX_UNOWNED) {
mtx_exit(&sched_lock, MTX_SPIN);
continue;
}
/*
* The mutex was marked contested on release. This
* means that there are processes blocked on it.
*/
if (v == MTX_CONTESTED) {
p1 = TAILQ_FIRST(&m->mtx_blocked);
KASSERT(p1 != NULL, ("contested mutex has no contesters"));
KASSERT(p != NULL, ("curproc is NULL for contested mutex"));
m->mtx_lock = (uintptr_t)p | MTX_CONTESTED;
if (p1->p_priority < p->p_priority) {
SET_PRIO(p, p1->p_priority);
}
mtx_exit(&sched_lock, MTX_SPIN);
return;
}
/*
* If the mutex isn't already contested and
* a failure occurs setting the contested bit the
* mutex was either release or the
* state of the RECURSION bit changed.
*/
if ((v & MTX_CONTESTED) == 0 &&
!atomic_cmpset_ptr(&m->mtx_lock, (void *)v,
(void *)(v | MTX_CONTESTED))) {
mtx_exit(&sched_lock, MTX_SPIN);
continue;
}
/* We definitely have to sleep for this lock */
mtx_assert(m, MA_NOTOWNED);
#ifdef notyet
/*
* If we're borrowing an interrupted thread's VM
* context must clean up before going to sleep.
*/
if (p->p_flag & (P_ITHD | P_SITHD)) {
ithd_t *it = (ithd_t *)p;
if (it->it_interrupted) {
CTR2(KTR_LOCK,
"mtx_enter: 0x%x interrupted 0x%x",
it, it->it_interrupted);
intr_thd_fixup(it);
}
}
#endif
/* Put us on the list of procs blocked on this mutex */
if (TAILQ_EMPTY(&m->mtx_blocked)) {
p1 = (struct proc *)(m->mtx_lock &
MTX_FLAGMASK);
LIST_INSERT_HEAD(&p1->p_contested, m,
mtx_contested);
TAILQ_INSERT_TAIL(&m->mtx_blocked, p, p_procq);
} else {
TAILQ_FOREACH(p1, &m->mtx_blocked, p_procq)
if (p1->p_priority > p->p_priority)
break;
if (p1)
TAILQ_INSERT_BEFORE(p1, p, p_procq);
else
TAILQ_INSERT_TAIL(&m->mtx_blocked, p,
p_procq);
}
p->p_blocked = m; /* Who we're blocked on */
p->p_stat = SMTX;
#if 0
propagate_priority(p);
#endif
CTR3(KTR_LOCK, "mtx_enter: p 0x%p blocked on [0x%p] %s",
p, m, m->mtx_description);
Don't release and acquire Giant in mi_switch(). Instead, release and acquire Giant as needed in functions that call mi_switch(). The releases need to be done outside of the sched_lock to avoid potential deadlocks from trying to acquire Giant while interrupts are disabled. Submitted by: witness
2000-11-16 02:16:44 +00:00
mi_switch();
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
CTR3(KTR_LOCK,
"mtx_enter: p 0x%p free from blocked on [0x%p] %s",
p, m, m->mtx_description);
mtx_exit(&sched_lock, MTX_SPIN);
}
return;
case MTX_SPIN:
case MTX_SPIN | MTX_FIRST:
case MTX_SPIN | MTX_TOPHALF:
{
int i = 0;
if (m->mtx_lock == (uintptr_t)p) {
m->mtx_recurse++;
return;
}
CTR1(KTR_LOCK, "mtx_enter: %p spinning", m);
for (;;) {
if (_obtain_lock(m, p))
break;
while (m->mtx_lock != MTX_UNOWNED) {
if (i++ < 1000000)
continue;
if (i++ < 6000000)
DELAY (1);
#ifdef DDB
else if (!db_active)
#else
else
#endif
panic(
"spin lock %s held by 0x%p for > 5 seconds",
m->mtx_description,
(void *)m->mtx_lock);
}
}
#ifdef MUTEX_DEBUG
if (type != MTX_SPIN)
m->mtx_saveintr = 0xbeefface;
else
#endif
m->mtx_saveintr = saveintr;
CTR1(KTR_LOCK, "mtx_enter: 0x%p spin done", m);
return;
}
}
}
void
mtx_exit_hard(struct mtx *m, int type)
{
struct proc *p, *p1;
struct mtx *m1;
int pri;
p = CURPROC;
switch (type) {
case MTX_DEF:
case MTX_DEF | MTX_NOSWITCH:
if (m->mtx_recurse != 0) {
if (--(m->mtx_recurse) == 0)
atomic_clear_ptr(&m->mtx_lock, MTX_RECURSE);
CTR1(KTR_LOCK, "mtx_exit: 0x%p unrecurse", m);
return;
}
mtx_enter(&sched_lock, MTX_SPIN);
CTR1(KTR_LOCK, "mtx_exit: 0x%p contested", m);
p1 = TAILQ_FIRST(&m->mtx_blocked);
MPASS(p->p_magic == P_MAGIC);
MPASS(p1->p_magic == P_MAGIC);
TAILQ_REMOVE(&m->mtx_blocked, p1, p_procq);
if (TAILQ_EMPTY(&m->mtx_blocked)) {
LIST_REMOVE(m, mtx_contested);
_release_lock_quick(m);
CTR1(KTR_LOCK, "mtx_exit: 0x%p not held", m);
} else
Use an atomic operation with an appropriate memory barrier when releasing a contested sleep mutex in the case that at least two processes are blocked on the contested mutex.
2000-11-29 18:41:19 +00:00
atomic_store_rel_ptr(&m->mtx_lock,
(void *)MTX_CONTESTED);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
pri = MAXPRI;
LIST_FOREACH(m1, &p->p_contested, mtx_contested) {
int cp = TAILQ_FIRST(&m1->mtx_blocked)->p_priority;
if (cp < pri)
pri = cp;
}
if (pri > p->p_nativepri)
pri = p->p_nativepri;
SET_PRIO(p, pri);
CTR2(KTR_LOCK, "mtx_exit: 0x%p contested setrunqueue 0x%p",
m, p1);
p1->p_blocked = NULL;
p1->p_stat = SRUN;
setrunqueue(p1);
if ((type & MTX_NOSWITCH) == 0 && p1->p_priority < pri) {
#ifdef notyet
if (p->p_flag & (P_ITHD | P_SITHD)) {
ithd_t *it = (ithd_t *)p;
if (it->it_interrupted) {
CTR2(KTR_LOCK,
"mtx_exit: 0x%x interruped 0x%x",
it, it->it_interrupted);
intr_thd_fixup(it);
}
}
#endif
setrunqueue(p);
CTR2(KTR_LOCK, "mtx_exit: 0x%p switching out lock=0x%p",
Quite some warnings.
2000-10-25 04:37:54 +00:00
m, (void *)m->mtx_lock);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
mi_switch();
CTR2(KTR_LOCK, "mtx_exit: 0x%p resuming lock=0x%p",
Quite some warnings.
2000-10-25 04:37:54 +00:00
m, (void *)m->mtx_lock);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
mtx_exit(&sched_lock, MTX_SPIN);
break;
case MTX_SPIN:
case MTX_SPIN | MTX_FIRST:
if (m->mtx_recurse != 0) {
m->mtx_recurse--;
return;
}
MPASS(mtx_owned(m));
_release_lock_quick(m);
if (type & MTX_FIRST)
enable_intr(); /* XXX is this kosher? */
else {
MPASS(m->mtx_saveintr != 0xbeefface);
restore_intr(m->mtx_saveintr);
}
break;
case MTX_SPIN | MTX_TOPHALF:
if (m->mtx_recurse != 0) {
m->mtx_recurse--;
return;
}
MPASS(mtx_owned(m));
_release_lock_quick(m);
break;
default:
panic("mtx_exit_hard: unsupported type 0x%x\n", type);
}
}
#define MV_DESTROY 0 /* validate before destory */
#define MV_INIT 1 /* validate before init */
#ifdef MUTEX_DEBUG
int mtx_validate __P((struct mtx *, int));
int
mtx_validate(struct mtx *m, int when)
{
struct mtx *mp;
int i;
int retval = 0;
if (m == &all_mtx || cold)
return 0;
mtx_enter(&all_mtx, MTX_DEF);
/*
* XXX - When kernacc() is fixed on the alpha to handle K0_SEG memory properly
* we can re-enable the kernacc() checks.
*/
#ifndef __alpha__
MPASS(kernacc((caddr_t)all_mtx.mtx_next, sizeof(uintptr_t),
VM_PROT_READ) == 1);
#endif
MPASS(all_mtx.mtx_next->mtx_prev == &all_mtx);
for (i = 0, mp = all_mtx.mtx_next; mp != &all_mtx; mp = mp->mtx_next) {
#ifndef __alpha__
if (kernacc((caddr_t)mp->mtx_next, sizeof(uintptr_t),
VM_PROT_READ) != 1) {
panic("mtx_validate: mp=%p mp->mtx_next=%p",
mp, mp->mtx_next);
}
#endif
i++;
if (i > mtx_cur_cnt) {
panic("mtx_validate: too many in chain, known=%d\n",
mtx_cur_cnt);
}
}
MPASS(i == mtx_cur_cnt);
switch (when) {
case MV_DESTROY:
for (mp = all_mtx.mtx_next; mp != &all_mtx; mp = mp->mtx_next)
if (mp == m)
break;
MPASS(mp == m);
break;
case MV_INIT:
for (mp = all_mtx.mtx_next; mp != &all_mtx; mp = mp->mtx_next)
if (mp == m) {
/*
* Not good. This mutex already exists.
*/
printf("re-initing existing mutex %s\n",
m->mtx_description);
MPASS(m->mtx_lock == MTX_UNOWNED);
retval = 1;
}
}
mtx_exit(&all_mtx, MTX_DEF);
return (retval);
}
#endif
void
mtx_init(struct mtx *m, const char *t, int flag)
{
#ifdef MUTEX_DEBUG
struct mtx_debug *debug;
#endif
CTR2(KTR_LOCK, "mtx_init 0x%p (%s)", m, t);
#ifdef MUTEX_DEBUG
if (mtx_validate(m, MV_INIT)) /* diagnostic and error correction */
return;
if (flag & MTX_COLD)
debug = m->mtx_debug;
else
debug = NULL;
if (debug == NULL) {
#ifdef DIAGNOSTIC
if(cold && bootverbose)
printf("malloc'ing mtx_debug while cold for %s\n", t);
#endif
/* XXX - should not use DEVBUF */
debug = malloc(sizeof(struct mtx_debug), M_DEVBUF, M_NOWAIT);
MPASS(debug != NULL);
bzero(debug, sizeof(struct mtx_debug));
}
#endif
bzero((void *)m, sizeof *m);
TAILQ_INIT(&m->mtx_blocked);
#ifdef MUTEX_DEBUG
m->mtx_debug = debug;
#endif
m->mtx_description = t;
m->mtx_lock = MTX_UNOWNED;
/* Put on all mutex queue */
mtx_enter(&all_mtx, MTX_DEF);
m->mtx_next = &all_mtx;
m->mtx_prev = all_mtx.mtx_prev;
m->mtx_prev->mtx_next = m;
all_mtx.mtx_prev = m;
if (++mtx_cur_cnt > mtx_max_cnt)
mtx_max_cnt = mtx_cur_cnt;
mtx_exit(&all_mtx, MTX_DEF);
witness_init(m, flag);
}
void
mtx_destroy(struct mtx *m)
{
CTR2(KTR_LOCK, "mtx_destroy 0x%p (%s)", m, m->mtx_description);
#ifdef MUTEX_DEBUG
if (m->mtx_next == NULL)
panic("mtx_destroy: %p (%s) already destroyed",
m, m->mtx_description);
if (!mtx_owned(m)) {
MPASS(m->mtx_lock == MTX_UNOWNED);
} else {
MPASS((m->mtx_lock & (MTX_RECURSE|MTX_CONTESTED)) == 0);
}
mtx_validate(m, MV_DESTROY); /* diagnostic */
#endif
#ifdef WITNESS
if (m->mtx_witness)
witness_destroy(m);
#endif /* WITNESS */
/* Remove from the all mutex queue */
mtx_enter(&all_mtx, MTX_DEF);
m->mtx_next->mtx_prev = m->mtx_prev;
m->mtx_prev->mtx_next = m->mtx_next;
#ifdef MUTEX_DEBUG
m->mtx_next = m->mtx_prev = NULL;
free(m->mtx_debug, M_DEVBUF);
m->mtx_debug = NULL;
#endif
mtx_cur_cnt--;
mtx_exit(&all_mtx, MTX_DEF);
}
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*
* The non-inlined versions of the mtx_*() functions are always built (above),
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
* but the witness code depends on the MUTEX_DEBUG and WITNESS kernel options
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
* being specified.
*/
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#if (defined(MUTEX_DEBUG) && defined(WITNESS))
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#define WITNESS_COUNT 200
#define WITNESS_NCHILDREN 2
Actually enable the witness code if the WITNESS kernel option is enabled.
2000-10-20 21:58:11 +00:00
int witness_watch = 1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness {
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct witness *w_next;
Propogate the 'const'ness of mutex descriptions to the witness code to quiet warnings.
2000-10-20 22:45:01 +00:00
const char *w_description;
Rename mtx_enter(), mtx_try_enter(), and mtx_exit() and wrap them with cpp macros that expand to pass filename and line number information. This is necessary since we're using inline functions instead of macros now. Add const to the filename pointers passed througout the mtx and witness code.
2000-09-08 21:48:06 +00:00
const char *w_file;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int w_line;
struct witness *w_morechildren;
u_char w_childcnt;
u_char w_Giant_squawked:1;
u_char w_other_squawked:1;
u_char w_same_squawked:1;
u_char w_sleep:1;
u_char w_spin:1; /* this is a spin mutex */
u_int w_level;
struct witness *w_children[WITNESS_NCHILDREN];
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
};
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness_blessed {
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
char *b_lock1;
char *b_lock2;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
};
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
* When DDB is enabled and witness_ddb is set to 1, it will cause the system to
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
* drop into kdebug() when:
* - a lock heirarchy violation occurs
* - locks are held when going to sleep.
*/
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef WITNESS_DDB
int witness_ddb = 1;
#else
int witness_ddb = 0;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#endif
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
SYSCTL_INT(_debug, OID_AUTO, witness_ddb, CTLFLAG_RW, &witness_ddb, 0, "");
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef WITNESS_SKIPSPIN
int witness_skipspin = 1;
#else
int witness_skipspin = 0;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
#endif
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
SYSCTL_INT(_debug, OID_AUTO, witness_skipspin, CTLFLAG_RD, &witness_skipspin, 0,
"");
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
MUTEX_DECLARE(static,w_mtx);
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness *w_free;
static struct witness *w_all;
static int w_inited;
static int witness_dead; /* fatal error, probably no memory */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness w_data[WITNESS_COUNT];
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
Propogate the 'const'ness of mutex descriptions to the witness code to quiet warnings.
2000-10-20 22:45:01 +00:00
static struct witness *enroll __P((const char *description, int flag));
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static int itismychild __P((struct witness *parent, struct witness *child));
static void removechild __P((struct witness *parent, struct witness *child));
static int isitmychild __P((struct witness *parent, struct witness *child));
static int isitmydescendant __P((struct witness *parent, struct witness *child));
static int dup_ok __P((struct witness *));
static int blessed __P((struct witness *, struct witness *));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
static void witness_displaydescendants
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
__P((void(*)(const char *fmt, ...), struct witness *));
static void witness_leveldescendents __P((struct witness *parent, int level));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
static void witness_levelall __P((void));
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness * witness_get __P((void));
static void witness_free __P((struct witness *m));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
static char *ignore_list[] = {
"witness lock",
NULL
};
static char *spin_order_list[] = {
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
"sio",
The sched_lock mutex goes after the sio mutex in the locking order since a software interrupt can be scheduled in the sio interrupt handler while the sio mutex is held.
2000-11-29 18:38:14 +00:00
"sched lock",
Don't release and acquire Giant in mi_switch(). Instead, release and acquire Giant as needed in functions that call mi_switch(). The releases need to be done outside of the sched_lock to avoid potential deadlocks from trying to acquire Giant while interrupts are disabled. Submitted by: witness
2000-11-16 02:16:44 +00:00
#ifdef __i386__
"clk",
#endif
- Protect the callout wheel with a separate spin mutex, callout_lock. - Use the mutex in hardclock to ensure no races between it and softclock. - Make softclock be INTR_MPSAFE and provide a flag, CALLOUT_MPSAFE, which specifies that a callout handler does not need giant. There is still no way to set this flag when regstering a callout. Reviewed by: -smp@, jlemon
2000-11-19 06:02:32 +00:00
"callout",
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
/*
* leaf locks
*/
NULL
};
static char *order_list[] = {
Add uidinfo hash and uidinfo struct to the witness order list.
2000-11-26 15:05:46 +00:00
"uidinfo hash", "uidinfo struct", NULL,
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
NULL
};
static char *dup_list[] = {
NULL
};
static char *sleep_list[] = {
- Split the run queue and sleep queue linkage, so that a process may block on a mutex while on the sleep queue without corrupting it. - Move dropping of Giant to after the acquire of sched_lock. Tested by: John Hay <jhay@icomtek.csir.co.za> jhb
2000-11-17 18:09:18 +00:00
"Giant",
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
NULL
};
/*
* Pairs of locks which have been blessed
* Don't complain about order problems with blessed locks
*/
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness_blessed blessed_list[] = {
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
};
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static int blessed_count = sizeof(blessed_list) / sizeof(struct witness_blessed);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_init(struct mtx *m, int flag)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
m->mtx_witness = enroll(m->mtx_description, flag);
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_destroy(struct mtx *m)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct mtx *m1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct proc *p;
p = CURPROC;
for ((m1 = LIST_FIRST(&p->p_heldmtx)); m1 != NULL;
m1 = LIST_NEXT(m1, mtx_held)) {
if (m1 == m) {
LIST_REMOVE(m, mtx_held);
break;
}
}
return;
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_enter(struct mtx *m, int flags, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
struct mtx *m1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct proc *p;
int i;
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
int go_into_ddb = 0;
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w = m->mtx_witness;
p = CURPROC;
if (flags & MTX_SPIN) {
if (!w->w_spin)
Style cleanups. No functional changes.
2000-09-09 23:18:48 +00:00
panic("mutex_enter: MTX_SPIN on MTX_DEF mutex %s @"
" %s:%d", m->mtx_description, file, line);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (m->mtx_recurse != 0)
return;
mtx_enter(&w_mtx, MTX_SPIN);
i = witness_spin_check;
if (i != 0 && w->w_level < i) {
mtx_exit(&w_mtx, MTX_SPIN);
Style cleanups. No functional changes.
2000-09-09 23:18:48 +00:00
panic("mutex_enter(%s:%x, MTX_SPIN) out of order @"
" %s:%d already holding %s:%x",
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
m->mtx_description, w->w_level, file, line,
spin_order_list[ffs(i)-1], i);
}
PCPU_SET(witness_spin_check, i | w->w_level);
mtx_exit(&w_mtx, MTX_SPIN);
Save the line number and filename of the last mtx_enter operation for spin locks. We already do this for sleep locks.
2000-11-29 18:37:01 +00:00
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
}
if (w->w_spin)
panic("mutex_enter: MTX_DEF on MTX_SPIN mutex %s @ %s:%d",
m->mtx_description, file, line);
if (m->mtx_recurse != 0)
return;
if (witness_dead)
goto out;
Don't perform witness checks in witness_enter() during a panic.
2000-11-15 22:00:31 +00:00
if (cold || panicstr)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
if (!mtx_legal2block())
panic("blockable mtx_enter() of %s when not legal @ %s:%d",
m->mtx_description, file, line);
/*
* Is this the first mutex acquired
*/
if ((m1 = LIST_FIRST(&p->p_heldmtx)) == NULL)
goto out;
if ((w1 = m1->mtx_witness) == w) {
if (w->w_same_squawked || dup_ok(w))
goto out;
w->w_same_squawked = 1;
printf("acquring duplicate lock of same type: \"%s\"\n",
m->mtx_description);
printf(" 1st @ %s:%d\n", w->w_file, w->w_line);
printf(" 2nd @ %s:%d\n", file, line);
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
go_into_ddb = 1;
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
}
MPASS(!mtx_owned(&w_mtx));
mtx_enter(&w_mtx, MTX_SPIN);
/*
* If we have a known higher number just say ok
*/
if (witness_watch > 1 && w->w_level > w1->w_level) {
mtx_exit(&w_mtx, MTX_SPIN);
goto out;
}
if (isitmydescendant(m1->mtx_witness, w)) {
mtx_exit(&w_mtx, MTX_SPIN);
goto out;
}
for (i = 0; m1 != NULL; m1 = LIST_NEXT(m1, mtx_held), i++) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(i < 200);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w1 = m1->mtx_witness;
if (isitmydescendant(w, w1)) {
mtx_exit(&w_mtx, MTX_SPIN);
if (blessed(w, w1))
goto out;
if (m1 == &Giant) {
if (w1->w_Giant_squawked)
goto out;
else
w1->w_Giant_squawked = 1;
} else {
if (w1->w_other_squawked)
goto out;
else
w1->w_other_squawked = 1;
}
printf("lock order reversal\n");
printf(" 1st %s last acquired @ %s:%d\n",
w->w_description, w->w_file, w->w_line);
printf(" 2nd %p %s @ %s:%d\n",
m1, w1->w_description, w1->w_file, w1->w_line);
printf(" 3rd %p %s @ %s:%d\n",
m, w->w_description, file, line);
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
go_into_ddb = 1;
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
goto out;
}
}
m1 = LIST_FIRST(&p->p_heldmtx);
if (!itismychild(m1->mtx_witness, w))
mtx_exit(&w_mtx, MTX_SPIN);
out:
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
if (witness_ddb && go_into_ddb)
Debugger("witness_enter");
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
/*
Minor whitespace nit in a comment.
2000-11-10 21:21:20 +00:00
* If this pays off it likely means that a mutex being witnessed
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
* is acquired in hardclock. Put it in the ignore list. It is
* likely not the mutex this assert fails on.
*/
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(m->mtx_held.le_prev == NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
LIST_INSERT_HEAD(&p->p_heldmtx, (struct mtx*)m, mtx_held);
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_exit(struct mtx *m, int flags, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
w = m->mtx_witness;
if (flags & MTX_SPIN) {
if (!w->w_spin)
Style cleanups. No functional changes.
2000-09-09 23:18:48 +00:00
panic("mutex_exit: MTX_SPIN on MTX_DEF mutex %s @"
" %s:%d", m->mtx_description, file, line);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (m->mtx_recurse != 0)
return;
mtx_enter(&w_mtx, MTX_SPIN);
PCPU_SET(witness_spin_check, witness_spin_check & ~w->w_level);
mtx_exit(&w_mtx, MTX_SPIN);
return;
}
if (w->w_spin)
panic("mutex_exit: MTX_DEF on MTX_SPIN mutex %s @ %s:%d",
m->mtx_description, file, line);
if (m->mtx_recurse != 0)
return;
if ((flags & MTX_NOSWITCH) == 0 && !mtx_legal2block() && !cold)
panic("switchable mtx_exit() of %s when not legal @ %s:%d",
m->mtx_description, file, line);
LIST_REMOVE(m, mtx_held);
m->mtx_held.le_prev = NULL;
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_try_enter(struct mtx *m, int flags, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
struct proc *p;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w = m->mtx_witness;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (flags & MTX_SPIN) {
if (!w->w_spin)
panic("mutex_try_enter: "
"MTX_SPIN on MTX_DEF mutex %s @ %s:%d",
m->mtx_description, file, line);
if (m->mtx_recurse != 0)
return;
mtx_enter(&w_mtx, MTX_SPIN);
PCPU_SET(witness_spin_check, witness_spin_check | w->w_level);
mtx_exit(&w_mtx, MTX_SPIN);
Save the line number and filename of the last mtx_enter operation for spin locks. We already do this for sleep locks.
2000-11-29 18:37:01 +00:00
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return;
}
if (w->w_spin)
panic("mutex_try_enter: MTX_DEF on MTX_SPIN mutex %s @ %s:%d",
m->mtx_description, file, line);
if (m->mtx_recurse != 0)
return;
w->w_file = file;
w->w_line = line;
m->mtx_line = line;
m->mtx_file = file;
p = CURPROC;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(m->mtx_held.le_prev == NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
LIST_INSERT_HEAD(&p->p_heldmtx, (struct mtx*)m, mtx_held);
}
void
witness_display(void(*prnt)(const char *fmt, ...))
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
witness_levelall();
for (w = w_all; w; w = w->w_next) {
if (w->w_file == NULL)
continue;
for (w1 = w_all; w1; w1 = w1->w_next) {
if (isitmychild(w1, w))
break;
}
if (w1 != NULL)
continue;
/*
* This lock has no anscestors, display its descendants.
*/
witness_displaydescendants(prnt, w);
}
prnt("\nMutex which were never acquired\n");
for (w = w_all; w; w = w->w_next) {
if (w->w_file != NULL)
continue;
prnt("%s\n", w->w_description);
}
}
int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_sleep(int check_only, struct mtx *mtx, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct mtx *m;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
struct proc *p;
char **sleep;
int n = 0;
p = CURPROC;
for ((m = LIST_FIRST(&p->p_heldmtx)); m != NULL;
m = LIST_NEXT(m, mtx_held)) {
if (m == mtx)
continue;
for (sleep = sleep_list; *sleep!= NULL; sleep++)
if (strcmp(m->mtx_description, *sleep) == 0)
goto next;
printf("%s:%d: %s with \"%s\" locked from %s:%d\n",
file, line, check_only ? "could sleep" : "sleeping",
m->mtx_description,
m->mtx_witness->w_file, m->mtx_witness->w_line);
n++;
next:
}
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
#ifdef DDB
if (witness_ddb && n)
Debugger("witness_sleep");
#endif /* DDB */
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return (n);
}
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness *
Propogate the 'const'ness of mutex descriptions to the witness code to quiet warnings.
2000-10-20 22:45:01 +00:00
enroll(const char *description, int flag)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
int i;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
char **ignore;
char **order;
if (!witness_watch)
return (NULL);
for (ignore = ignore_list; *ignore != NULL; ignore++)
if (strcmp(description, *ignore) == 0)
return (NULL);
if (w_inited == 0) {
- Use MUTEX_DECLARE() and MTX_COLD for the WITNESS code's internal mutex so it can function before malloc(9) is up and running. - Add two new options WITNESS_DDB and WITNESS_SKIPSPIN. If WITNESS_SKIPSPIN is enabled, then spin mutexes are ignored by the WITNESS code. If WITNESS_DDB is turned on and DDB is compiled into the kernel, then the kernel will drop into DDB when either a lock hierarchy violation occurs or mutexes are held when going to sleep. - Add some new sysctls: debug.witness_ddb is a read-write sysctl that corresponds to WITNESS_DDB. The kernel option merely changes the default value to on at boot. debug.witness_skipspin is a read-only sysctl that one can use to determine if the kernel was compiled with WITNESS_SKIPSPIN. - Wipe out the BSD/OS-specific lock order lists. We get to build our own lists now as we add mutexes to the kernel.
2000-10-27 02:59:30 +00:00
mtx_init(&w_mtx, "witness lock", MTX_COLD | MTX_DEF);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (i = 0; i < WITNESS_COUNT; i++) {
w = &w_data[i];
witness_free(w);
}
w_inited = 1;
for (order = order_list; *order != NULL; order++) {
w = enroll(*order, MTX_DEF);
w->w_file = "order list";
for (order++; *order != NULL; order++) {
w1 = enroll(*order, MTX_DEF);
w1->w_file = "order list";
itismychild(w, w1);
w = w1;
}
}
}
if ((flag & MTX_SPIN) && witness_skipspin)
return (NULL);
mtx_enter(&w_mtx, MTX_SPIN);
for (w = w_all; w; w = w->w_next) {
if (strcmp(description, w->w_description) == 0) {
mtx_exit(&w_mtx, MTX_SPIN);
return (w);
}
}
if ((w = witness_get()) == NULL)
return (NULL);
w->w_next = w_all;
w_all = w;
w->w_description = description;
mtx_exit(&w_mtx, MTX_SPIN);
if (flag & MTX_SPIN) {
w->w_spin = 1;
i = 1;
for (order = spin_order_list; *order != NULL; order++) {
if (strcmp(description, *order) == 0)
break;
i <<= 1;
}
if (*order == NULL)
panic("spin lock %s not in order list", description);
w->w_level = i;
}
return (w);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
itismychild(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
static int recursed;
/*
* Insert "child" after "parent"
*/
while (parent->w_morechildren)
parent = parent->w_morechildren;
if (parent->w_childcnt == WITNESS_NCHILDREN) {
if ((parent->w_morechildren = witness_get()) == NULL)
return (1);
parent = parent->w_morechildren;
}
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(child != NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
parent->w_children[parent->w_childcnt++] = child;
/*
* now prune whole tree
*/
if (recursed)
return (0);
recursed = 1;
for (child = w_all; child != NULL; child = child->w_next) {
for (parent = w_all; parent != NULL;
parent = parent->w_next) {
if (!isitmychild(parent, child))
continue;
removechild(parent, child);
if (isitmydescendant(parent, child))
continue;
itismychild(parent, child);
}
}
recursed = 0;
witness_levelall();
return (0);
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
removechild(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
for (w = parent; w != NULL; w = w->w_morechildren)
for (i = 0; i < w->w_childcnt; i++)
if (w->w_children[i] == child)
goto found;
return;
found:
for (w1 = w; w1->w_morechildren != NULL; w1 = w1->w_morechildren)
continue;
w->w_children[i] = w1->w_children[--w1->w_childcnt];
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(w->w_children[i] != NULL);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (w1->w_childcnt != 0)
return;
if (w1 == parent)
return;
for (w = parent; w->w_morechildren != w1; w = w->w_morechildren)
continue;
w->w_morechildren = 0;
witness_free(w1);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
isitmychild(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
for (w = parent; w != NULL; w = w->w_morechildren) {
for (i = 0; i < w->w_childcnt; i++) {
if (w->w_children[i] == child)
return (1);
}
}
return (0);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
isitmydescendant(struct witness *parent, struct witness *child)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
int j;
for (j = 0, w = parent; w != NULL; w = w->w_morechildren, j++) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
MPASS(j < 1000);
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (i = 0; i < w->w_childcnt; i++) {
if (w->w_children[i] == child)
return (1);
}
for (i = 0; i < w->w_childcnt; i++) {
if (isitmydescendant(w->w_children[i], child))
return (1);
}
}
return (0);
}
void
witness_levelall (void)
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w, *w1;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (w = w_all; w; w = w->w_next)
if (!w->w_spin)
w->w_level = 0;
for (w = w_all; w; w = w->w_next) {
if (w->w_spin)
continue;
for (w1 = w_all; w1; w1 = w1->w_next) {
if (isitmychild(w1, w))
break;
}
if (w1 != NULL)
continue;
witness_leveldescendents(w, 0);
}
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_leveldescendents(struct witness *parent, int level)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
int i;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if (parent->w_level < level)
parent->w_level = level;
level++;
for (w = parent; w != NULL; w = w->w_morechildren)
for (i = 0; i < w->w_childcnt; i++)
witness_leveldescendents(w->w_children[i], level);
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_displaydescendants(void(*prnt)(const char *fmt, ...),
struct witness *parent)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
int i;
int level = parent->w_level;
prnt("%d", level);
if (level < 10)
prnt(" ");
for (i = 0; i < level; i++)
prnt(" ");
prnt("%s", parent->w_description);
if (parent->w_file != NULL) {
prnt(" -- last acquired @ %s", parent->w_file);
#ifndef W_USE_WHERE
prnt(":%d", parent->w_line);
#endif
prnt("\n");
}
for (w = parent; w != NULL; w = w->w_morechildren)
for (i = 0; i < w->w_childcnt; i++)
witness_displaydescendants(prnt, w->w_children[i]);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
dup_ok(struct witness *w)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
char **dup;
for (dup = dup_list; *dup!= NULL; dup++)
if (strcmp(w->w_description, *dup) == 0)
return (1);
return (0);
}
static int
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
blessed(struct witness *w1, struct witness *w2)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
int i;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness_blessed *b;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for (i = 0; i < blessed_count; i++) {
b = &blessed_list[i];
if (strcmp(w1->w_description, b->b_lock1) == 0) {
if (strcmp(w2->w_description, b->b_lock2) == 0)
return (1);
continue;
}
if (strcmp(w1->w_description, b->b_lock2) == 0)
if (strcmp(w2->w_description, b->b_lock1) == 0)
return (1);
}
return (0);
}
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
static struct witness *
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
witness_get()
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct witness *w;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
if ((w = w_free) == NULL) {
witness_dead = 1;
mtx_exit(&w_mtx, MTX_SPIN);
printf("witness exhausted\n");
return (NULL);
}
w_free = w->w_next;
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
bzero(w, sizeof(*w));
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
return (w);
}
static void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_free(struct witness *w)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
w->w_next = w_free;
w_free = w;
}
void
witness_list(struct proc *p)
{
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
struct mtx *m;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
for ((m = LIST_FIRST(&p->p_heldmtx)); m != NULL;
m = LIST_NEXT(m, mtx_held)) {
printf("\t\"%s\" (%p) locked at %s:%d\n",
m->mtx_description, m,
m->mtx_witness->w_file, m->mtx_witness->w_line);
}
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_save(struct mtx *m, const char **filep, int *linep)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
*filep = m->mtx_witness->w_file;
*linep = m->mtx_witness->w_line;
}
void
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just use struct mtx, struct witness, and struct witness_blessed. Requested by: bde
2000-09-14 20:15:16 +00:00
witness_restore(struct mtx *m, const char *file, int line)
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
{
m->mtx_witness->w_file = file;
m->mtx_witness->w_line = line;
}
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#endif /* (defined(MUTEX_DEBUG) && defined(WITNESS)) */
Reference in New Issue Copy Permalink