freebsd-nq/sys/dev/mfi/mfi_debug.c

282 lines
6.6 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2006 IronPort Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
2006-09-27 04:54:23 +00:00
#include "opt_mfi.h"
#ifdef MFI_DEBUG
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/bus.h>
#include <sys/bio.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/malloc.h>
#include <sys/selinfo.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
#include <sys/uio.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <dev/mfi/mfireg.h>
#include <dev/mfi/mfi_ioctl.h>
#include <dev/mfi/mfivar.h>
static void
mfi_print_frame_flags(device_t dev, uint32_t flags)
{
device_printf(dev, "flags=%b\n", flags,
"\20"
"\1NOPOST"
"\2SGL64"
"\3SENSE64"
"\4WRITE"
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
"\5READ"
"\6IEEESGL");
}
static void
mfi_print_sgl(struct mfi_frame_header *hdr, union mfi_sgl *sgl, int count)
{
int i, columns = 0;
printf("SG List:\n");
for (i = 0; i < count; i++) {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (hdr->flags & MFI_FRAME_IEEE_SGL) {
printf("0x%lx:%06d ", (u_long)sgl->sg_skinny[i].addr,
sgl->sg_skinny[i].len);
columns += 26;
if (columns > 77) {
printf("\n");
columns = 0;
}
} else if (hdr->flags & MFI_FRAME_SGL64) {
printf("0x%lx:%06d ", (u_long)sgl->sg64[i].addr,
sgl->sg64[i].len);
columns += 26;
if (columns > 77) {
printf("\n");
columns = 0;
}
} else {
printf("0x%x:%06d ", sgl->sg32[i].addr,
sgl->sg32[i].len);
columns += 18;
if (columns > 71) {
printf("\n");
columns = 0;
}
}
}
if (columns != 0)
printf("\n");
}
static void
mfi_print_ldio(struct mfi_softc *sc, device_t dev, struct mfi_command *cm)
{
struct mfi_io_frame *io;
struct mfi_frame_header *hdr;
io = &cm->cm_frame->io;
hdr = &io->header;
device_printf(dev, "cmd=%s target_id=%d sg_count=%d data_len=%d "
"lba=%d\n", (hdr->cmd == MFI_CMD_LD_READ) ? "LD_READ":"LD_WRITE",
hdr->target_id, hdr->sg_count, hdr->data_len, io->lba_lo);
mfi_print_frame_flags(dev, hdr->flags);
mfi_print_sgl(hdr, &io->sgl, hdr->sg_count);
}
static void
mfi_print_dcmd(struct mfi_softc *sc, device_t dev, struct mfi_command *cm)
{
struct mfi_dcmd_frame *dcmd;
struct mfi_frame_header *hdr;
const char *opcode;
dcmd = &cm->cm_frame->dcmd;
hdr = &dcmd->header;
switch (dcmd->opcode) {
case MFI_DCMD_CTRL_GETINFO:
opcode = "CTRL_GETINFO";
break;
case MFI_DCMD_CTRL_FLUSHCACHE:
opcode = "CTRL_FLUSHCACHE";
break;
case MFI_DCMD_CTRL_SHUTDOWN:
opcode = "CTRL_SHUTDOWN";
break;
case MFI_DCMD_CTRL_EVENT_GETINFO:
opcode = "EVENT_GETINFO";
break;
case MFI_DCMD_CTRL_EVENT_GET:
opcode = "EVENT_GET";
break;
case MFI_DCMD_CTRL_EVENT_WAIT:
opcode = "EVENT_WAIT";
break;
case MFI_DCMD_LD_GET_LIST:
opcode = "LD_GET_LIST";
break;
case MFI_DCMD_LD_GET_INFO:
opcode = "LD_GET_INFO";
break;
case MFI_DCMD_LD_GET_PROP:
opcode = "LD_GET_PROP";
break;
case MFI_DCMD_LD_SET_PROP:
opcode = "LD_SET_PROP";
break;
case MFI_DCMD_CLUSTER:
opcode = "CLUSTER";
break;
case MFI_DCMD_CLUSTER_RESET_ALL:
opcode = "CLUSTER_RESET_ALL";
break;
case MFI_DCMD_CLUSTER_RESET_LD:
opcode = "CLUSTER_RESET_LD";
break;
First fix pr 167226: ThunderBolt cannot read sector >= 2^32 or 2^21 with supplied patch. Second the bigger change, fix RAID operation on ThunderBolt base card such as physically removing a disk from a RAID and replacing it. The current situation is the RAID firmware effectively hangs waiting for an acknowledgement from the driver. This is due to the firmware support of the driver actually accessing the RAID from under the firmware. This is an interesting feature that the FreeBSD driver does not use. However, when the firmare detects the driver has attached it then expects the driver will synchronize LD's with the firmware. If the driver does not sync. then the management part of the firmware will hang waiting for it so a pulled driver will listed as still there. The fix for this problem isn't extremely difficult. However, figuring out why some of the code was the way it was and then redoing it was involved. Not have a spec. made it harder to try to figure out. The existing driver would send a MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge a LD state change. In read mode it gets the RAID map from the firmware. The FreeBSD driver doesn't do that currently. It could be added in the future with the appropriate structures. To simplify things, get the current LD state and then build the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends an acknowledgement for each LD. The map would probably state which LD's changed so then the driver could probably just acknowledge the LD's that changed versus all. This doesn't seem to be a problem. When a MFI_DCMD_LD_MAP_GET_INFO/write command is sent to the firmware, it will complete later when a change to the LD's happen. So it is very much like an AEN command returning when something happened. When the MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the sync'ing of the LD state. This needs to be done in as an event so that MFI_DCMD_LD_GET_LIST can wait for that command to complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write. The prior code didn't use the call-back function and tried to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when processing an interrupt. This added a bunch of code complexity to the interrupt handler. Using the call-back that is done for other commands got rid of this need. So the interrupt handler is greatly simplified. It seems that even commands that shouldn't be acknowledged end up in the interrupt handler. To deal with this, code was added to check to see if a command is in the busy queue or not. This might have contributed to the interrupt storm happening without MSI enabled on these cards. Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away. It would be interesting to see what other complexity could be removed from the ThunderBolt driver that really isn't needed in our mode of operation. Letting the RAID firmware do all of the I/O to disks is a lot faster since it can use its caches. It greatly simplifies what the driver has to do and potential bugs if the driver and firmware are not in sync. Simplify the aen_abort/cm_map_abort and put it in the softc versus in the command structure. This should get merged to 9 before the driver is merged to 8. PR: 167226 Submitted by: Petr Lampa MFC after: 3 days
2012-05-04 16:00:39 +00:00
case MFI_DCMD_LD_MAP_GET_INFO:
opcode = "LD_MAP_GET_INFO";
break;
default:
opcode = "UNKNOWN";
break;
}
device_printf(dev, "cmd=MFI_CMD_DCMD opcode=%s data_len=%d\n",
opcode, hdr->data_len);
mfi_print_frame_flags(dev, hdr->flags);
mfi_print_sgl(hdr, &dcmd->sgl, hdr->sg_count);
}
static void
mfi_print_generic_frame(struct mfi_softc *sc, struct mfi_command *cm)
{
hexdump(cm->cm_frame, cm->cm_total_frame_size, NULL, HD_OMIT_CHARS);
}
void
mfi_print_cmd(struct mfi_command *cm)
{
device_t dev;
struct mfi_softc *sc;
sc = cm->cm_sc;
dev = sc->mfi_dev;
device_printf(dev, "cm=%p index=%d total_frame_size=%d "
"extra_frames=%d\n", cm, cm->cm_index, cm->cm_total_frame_size,
cm->cm_extra_frames);
device_printf(dev, "flags=%b\n", cm->cm_flags,
"\20"
"\1MAPPED"
"\2DATAIN"
"\3DATAOUT"
"\4COMPLETED"
"\5POLLED"
"\6Q_FREE"
"\7Q_READY"
"\10Q_BUSY");
switch (cm->cm_frame->header.cmd) {
case MFI_CMD_DCMD:
mfi_print_dcmd(sc, dev, cm);
break;
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
mfi_print_ldio(sc, dev, cm);
break;
default:
mfi_print_generic_frame(sc, cm);
break;
}
return;
}
void
mfi_dump_cmds(struct mfi_softc *sc)
{
int i;
for (i = 0; i < sc->mfi_total_cmds; i++)
mfi_print_generic_frame(sc, &sc->mfi_commands[i]);
}
void
mfi_validate_sg(struct mfi_softc *sc, struct mfi_command *cm,
const char *function, int line)
{
struct mfi_frame_header *hdr;
int i;
uint32_t count = 0, data_len;
hdr = &cm->cm_frame->header;
count = 0;
for (i = 0; i < hdr->sg_count; i++) {
MFhead_mfi r227068 First cut of new HW support from LSI and merge into FreeBSD. Supports Drake Skinny and ThunderBolt cards. MFhead_mfi r227574 Style MFhead_mfi r227579 Use bus_addr_t instead of uintXX_t. MFhead_mfi r227580 MSI support MFhead_mfi r227612 More bus_addr_t and remove "#ifdef __amd64__". MFhead_mfi r227905 Improved timeout support from Scott. MFhead_mfi r228108 Make file. MFhead_mfi r228208 Fixed botched merge of Skinny support and enhanced handling in call back routine. MFhead_mfi r228279 Remove superfluous !TAILQ_EMPTY() checks before TAILQ_FOREACH(). MFhead_mfi r228310 Move mfi_decode_evt() to taskqueue. MFhead_mfi r228320 Implement MFI_DEBUG for 64bit S/G lists. MFhead_mfi r231988 Restore structure layout by reverting the array header to use [0] instead of [1]. MFhead_mfi r232412 Put wildcard pattern later in the match table. MFhead_mfi r232413 Use lower case for hexadecimal numbers to match surrounding style. MFhead_mfi r232414 Add more Thunderbolt variants. MFhead_mfi r232888 Don't act on events prior to boot or when shutting down. Add hw.mfi.detect_jbod_change to enable or disable acting on JBOD type of disks being added on insert and removed on removing. Switch hw.mfi.msi to 1 by default since it works better on newer cards. MFhead_mfi r233016 Release driver lock before taking Giant when deleting children. Use TAILQ_FOREACH_SAFE when items can be deleted. Make code a little simplier to follow. Fix a couple more style issues. MFhead_mfi r233620 Update mfi_spare/mfi_array with the actual number of elements for array_ref and pd. Change these max. #define names to avoid name space collisions. This will require an update to mfiutil It avoids mfiutil having to do a magic calculation. Add a note and #define to state that a "SYSTEM" disk is really what the firmware calls a "JBOD" drive. Thanks to the many that helped, LSI for the initial code drop, mav, delphij, jhb, sbruno that all helped with code and testing.
2012-03-30 23:05:48 +00:00
if (hdr->flags & MFI_FRAME_IEEE_SGL)
count += cm->cm_sg->sg_skinny[i].len;
else if (hdr->flags & MFI_FRAME_SGL64)
count += cm->cm_sg->sg64[i].len;
else
count += cm->cm_sg->sg32[i].len;
}
/*
count++;
*/
data_len = hdr->data_len;
switch (hdr->cmd) {
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
data_len = data_len * 512;
case MFI_CMD_DCMD:
if (count != data_len) {
device_printf(sc->mfi_dev,
"%s %d COMMAND %p S/G count bad %d %d %d 0x%jx\n",
function, line, cm, count, data_len, cm->cm_len,
(intmax_t)pmap_kextract((vm_offset_t)cm->cm_data));
MFI_PRINT_CMD(cm);
}
}
}
#endif