freebsd-nq/sys/dev/an/if_an.c

3832 lines
90 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Aironet 4500/4800 802.11 PCMCIA/ISA/PCI driver for FreeBSD.
*
* Written by Bill Paul <wpaul@ctr.columbia.edu>
* Electrical Engineering Department
* Columbia University, New York City
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* The Aironet 4500/4800 series cards come in PCMCIA, ISA and PCI form.
* This driver supports all three device types (PCI devices are supported
* through an extra PCI shim: /sys/dev/an/if_an_pci.c). ISA devices can be
* supported either using hard-coded IO port/IRQ settings or via Plug
* and Play. The 4500 series devices support 1Mbps and 2Mbps data rates.
* The 4800 devices support 1, 2, 5.5 and 11Mbps rates.
*
* Like the WaveLAN/IEEE cards, the Aironet NICs are all essentially
* PCMCIA devices. The ISA and PCI cards are a combination of a PCMCIA
* device and a PCMCIA to ISA or PCMCIA to PCI adapter card. There are
* a couple of important differences though:
*
* - Lucent ISA card looks to the host like a PCMCIA controller with
* a PCMCIA WaveLAN card inserted. This means that even desktop
* machines need to be configured with PCMCIA support in order to
* use WaveLAN/IEEE ISA cards. The Aironet cards on the other hand
* actually look like normal ISA and PCI devices to the host, so
* no PCMCIA controller support is needed
*
* The latter point results in a small gotcha. The Aironet PCMCIA
* cards can be configured for one of two operating modes depending
* on how the Vpp1 and Vpp2 programming voltages are set when the
* card is activated. In order to put the card in proper PCMCIA
* operation (where the CIS table is visible and the interface is
* programmed for PCMCIA operation), both Vpp1 and Vpp2 have to be
* set to 5 volts. FreeBSD by default doesn't set the Vpp voltages,
* which leaves the card in ISA/PCI mode, which prevents it from
* being activated as an PCMCIA device.
*
* Note that some PCMCIA controller software packages for Windows NT
* fail to set the voltages as well.
*
* The Aironet devices can operate in both station mode and access point
* mode. Typically, when programmed for station mode, the card can be set
* to automatically perform encapsulation/decapsulation of Ethernet II
* and 802.3 frames within 802.11 frames so that the host doesn't have
* to do it itself. This driver doesn't program the card that way: the
* driver handles all of the encapsulation/decapsulation itself.
*/
#include "opt_inet.h"
#ifdef INET
#define ANCACHE /* enable signal strength cache */
#endif
#include <sys/param.h>
#include <sys/ctype.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#ifdef ANCACHE
#include <sys/syslog.h>
#endif
#include <sys/sysctl.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
2001-10-11 17:52:20 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
#include <machine/resource.h>
#include <sys/malloc.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/ethernet.h>
#include <net/if_types.h>
#include <net/if_media.h>
2003-06-28 06:17:26 +00:00
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_ioctl.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#endif
#include <net/bpf.h>
#include <machine/md_var.h>
#include <dev/an/if_aironet_ieee.h>
#include <dev/an/if_anreg.h>
/* These are global because we need them in sys/pci/if_an_p.c. */
static void an_reset(struct an_softc *);
static int an_init_mpi350_desc(struct an_softc *);
static int an_ioctl(struct ifnet *, u_long, caddr_t);
static void an_init(void *);
static void an_init_locked(struct an_softc *);
static int an_init_tx_ring(struct an_softc *);
static void an_start(struct ifnet *);
static void an_start_locked(struct ifnet *);
static void an_watchdog(struct an_softc *);
static void an_rxeof(struct an_softc *);
static void an_txeof(struct an_softc *, int);
static void an_promisc(struct an_softc *, int);
static int an_cmd(struct an_softc *, int, int);
static int an_cmd_struct(struct an_softc *, struct an_command *,
struct an_reply *);
static int an_read_record(struct an_softc *, struct an_ltv_gen *);
static int an_write_record(struct an_softc *, struct an_ltv_gen *);
static int an_read_data(struct an_softc *, int, int, caddr_t, int);
static int an_write_data(struct an_softc *, int, int, caddr_t, int);
static int an_seek(struct an_softc *, int, int, int);
static int an_alloc_nicmem(struct an_softc *, int, int *);
static int an_dma_malloc(struct an_softc *, bus_size_t, struct an_dma_alloc *,
int);
static void an_dma_free(struct an_softc *, struct an_dma_alloc *);
static void an_dma_malloc_cb(void *, bus_dma_segment_t *, int, int);
static void an_stats_update(void *);
static void an_setdef(struct an_softc *, struct an_req *);
#ifdef ANCACHE
static void an_cache_store(struct an_softc *, struct ether_header *,
struct mbuf *, u_int8_t, u_int8_t);
#endif
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/* function definitions for use with the Cisco's Linux configuration
utilities
*/
2002-03-20 02:08:01 +00:00
static int readrids(struct ifnet*, struct aironet_ioctl*);
static int writerids(struct ifnet*, struct aironet_ioctl*);
static int flashcard(struct ifnet*, struct aironet_ioctl*);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
2002-03-20 02:08:01 +00:00
static int cmdreset(struct ifnet *);
static int setflashmode(struct ifnet *);
static int flashgchar(struct ifnet *,int,int);
static int flashpchar(struct ifnet *,int,int);
static int flashputbuf(struct ifnet *);
static int flashrestart(struct ifnet *);
static int WaitBusy(struct ifnet *, int);
static int unstickbusy(struct ifnet *);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
2002-03-20 02:08:01 +00:00
static void an_dump_record (struct an_softc *,struct an_ltv_gen *,
char *);
2002-03-20 02:08:01 +00:00
static int an_media_change (struct ifnet *);
static void an_media_status (struct ifnet *, struct ifmediareq *);
static int an_dump = 0;
static int an_cache_mode = 0;
#define DBM 0
#define PERCENT 1
#define RAW 2
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
static char an_conf[256];
static char an_conf_cache[256];
/* sysctl vars */
static SYSCTL_NODE(_hw, OID_AUTO, an, CTLFLAG_RD, 0,
"Wireless driver parameters");
/* XXX violate ethernet/netgraph callback hooks */
extern void (*ng_ether_attach_p)(struct ifnet *ifp);
extern void (*ng_ether_detach_p)(struct ifnet *ifp);
static int
sysctl_an_dump(SYSCTL_HANDLER_ARGS)
{
int error, r, last;
char *s = an_conf;
last = an_dump;
switch (an_dump) {
case 0:
strcpy(an_conf, "off");
break;
case 1:
strcpy(an_conf, "type");
break;
case 2:
strcpy(an_conf, "dump");
break;
default:
snprintf(an_conf, 5, "%x", an_dump);
break;
}
error = sysctl_handle_string(oidp, an_conf, sizeof(an_conf), req);
if (strncmp(an_conf,"off", 3) == 0) {
an_dump = 0;
}
if (strncmp(an_conf,"dump", 4) == 0) {
an_dump = 1;
}
if (strncmp(an_conf,"type", 4) == 0) {
an_dump = 2;
}
if (*s == 'f') {
r = 0;
for (;;s++) {
if ((*s >= '0') && (*s <= '9')) {
r = r * 16 + (*s - '0');
} else if ((*s >= 'a') && (*s <= 'f')) {
r = r * 16 + (*s - 'a' + 10);
} else {
break;
}
}
an_dump = r;
}
if (an_dump != last)
printf("Sysctl changed for Aironet driver\n");
return error;
}
SYSCTL_PROC(_hw_an, OID_AUTO, an_dump, CTLTYPE_STRING | CTLFLAG_RW,
0, sizeof(an_conf), sysctl_an_dump, "A", "");
static int
sysctl_an_cache_mode(SYSCTL_HANDLER_ARGS)
{
int error, last;
last = an_cache_mode;
switch (an_cache_mode) {
case 1:
strcpy(an_conf_cache, "per");
break;
case 2:
strcpy(an_conf_cache, "raw");
break;
default:
strcpy(an_conf_cache, "dbm");
break;
}
error = sysctl_handle_string(oidp, an_conf_cache,
sizeof(an_conf_cache), req);
if (strncmp(an_conf_cache,"dbm", 3) == 0) {
an_cache_mode = 0;
}
if (strncmp(an_conf_cache,"per", 3) == 0) {
an_cache_mode = 1;
}
if (strncmp(an_conf_cache,"raw", 3) == 0) {
an_cache_mode = 2;
}
return error;
}
SYSCTL_PROC(_hw_an, OID_AUTO, an_cache_mode, CTLTYPE_STRING | CTLFLAG_RW,
0, sizeof(an_conf_cache), sysctl_an_cache_mode, "A", "");
/*
* Setup the lock for PCI attachment since it skips the an_probe
* function. We need to setup the lock in an_probe since some
* operations need the lock. So we might as well create the
* lock in the probe.
*/
int
an_pci_probe(device_t dev)
{
struct an_softc *sc = device_get_softc(dev);
mtx_init(&sc->an_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
return(0);
}
/*
* We probe for an Aironet 4500/4800 card by attempting to
* read the default SSID list. On reset, the first entry in
* the SSID list will contain the name "tsunami." If we don't
* find this, then there's no card present.
*/
int
an_probe(device_t dev)
{
struct an_softc *sc = device_get_softc(dev);
struct an_ltv_ssidlist_new ssid;
int error;
bzero((char *)&ssid, sizeof(ssid));
error = an_alloc_port(dev, 0, AN_IOSIZ);
if (error != 0)
return (0);
/* can't do autoprobing */
if (rman_get_start(sc->port_res) == -1)
return(0);
/*
* We need to fake up a softc structure long enough
* to be able to issue commands and call some of the
* other routines.
*/
ssid.an_len = sizeof(ssid);
ssid.an_type = AN_RID_SSIDLIST;
/* Make sure interrupts are disabled. */
sc->mpi350 = 0;
CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), 0);
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), 0xFFFF);
mtx_init(&sc->an_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
AN_LOCK(sc);
an_reset(sc);
if (an_cmd(sc, AN_CMD_READCFG, 0)) {
AN_UNLOCK(sc);
goto fail;
}
if (an_read_record(sc, (struct an_ltv_gen *)&ssid)) {
AN_UNLOCK(sc);
goto fail;
}
/* See if the ssid matches what we expect ... but doesn't have to */
if (strcmp(ssid.an_entry[0].an_ssid, AN_DEF_SSID)) {
AN_UNLOCK(sc);
goto fail;
}
AN_UNLOCK(sc);
return(AN_IOSIZ);
fail:
mtx_destroy(&sc->an_mtx);
return(0);
}
/*
* Allocate a port resource with the given resource id.
*/
int
an_alloc_port(device_t dev, int rid, int size)
{
struct an_softc *sc = device_get_softc(dev);
struct resource *res;
res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
0ul, ~0ul, size, RF_ACTIVE);
if (res) {
sc->port_rid = rid;
sc->port_res = res;
return (0);
} else {
return (ENOENT);
}
}
/*
* Allocate a memory resource with the given resource id.
*/
int an_alloc_memory(device_t dev, int rid, int size)
{
struct an_softc *sc = device_get_softc(dev);
struct resource *res;
res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
0ul, ~0ul, size, RF_ACTIVE);
if (res) {
sc->mem_rid = rid;
sc->mem_res = res;
sc->mem_used = size;
return (0);
} else {
return (ENOENT);
}
}
/*
* Allocate a auxilary memory resource with the given resource id.
*/
int an_alloc_aux_memory(device_t dev, int rid, int size)
{
struct an_softc *sc = device_get_softc(dev);
struct resource *res;
res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid,
0ul, ~0ul, size, RF_ACTIVE);
if (res) {
sc->mem_aux_rid = rid;
sc->mem_aux_res = res;
sc->mem_aux_used = size;
return (0);
} else {
return (ENOENT);
}
}
/*
* Allocate an irq resource with the given resource id.
*/
int
an_alloc_irq(device_t dev, int rid, int flags)
{
struct an_softc *sc = device_get_softc(dev);
struct resource *res;
res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
(RF_ACTIVE | flags));
if (res) {
sc->irq_rid = rid;
sc->irq_res = res;
return (0);
} else {
return (ENOENT);
}
}
static void
an_dma_malloc_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
bus_addr_t *paddr = (bus_addr_t*) arg;
*paddr = segs->ds_addr;
}
/*
* Alloc DMA memory and set the pointer to it
*/
static int
an_dma_malloc(struct an_softc *sc, bus_size_t size, struct an_dma_alloc *dma,
int mapflags)
{
int r;
r = bus_dmamap_create(sc->an_dtag, BUS_DMA_NOWAIT, &dma->an_dma_map);
if (r != 0)
goto fail_0;
r = bus_dmamem_alloc(sc->an_dtag, (void**) &dma->an_dma_vaddr,
BUS_DMA_NOWAIT, &dma->an_dma_map);
if (r != 0)
goto fail_1;
r = bus_dmamap_load(sc->an_dtag, dma->an_dma_map, dma->an_dma_vaddr,
size,
an_dma_malloc_cb,
&dma->an_dma_paddr,
mapflags | BUS_DMA_NOWAIT);
if (r != 0)
goto fail_2;
dma->an_dma_size = size;
return (0);
fail_2:
bus_dmamap_unload(sc->an_dtag, dma->an_dma_map);
fail_1:
bus_dmamem_free(sc->an_dtag, dma->an_dma_vaddr, dma->an_dma_map);
fail_0:
bus_dmamap_destroy(sc->an_dtag, dma->an_dma_map);
dma->an_dma_map = NULL;
return (r);
}
static void
an_dma_free(struct an_softc *sc, struct an_dma_alloc *dma)
{
bus_dmamap_unload(sc->an_dtag, dma->an_dma_map);
bus_dmamem_free(sc->an_dtag, dma->an_dma_vaddr, dma->an_dma_map);
dma->an_dma_vaddr = 0;
bus_dmamap_destroy(sc->an_dtag, dma->an_dma_map);
}
/*
* Release all resources
*/
void
an_release_resources(device_t dev)
{
struct an_softc *sc = device_get_softc(dev);
int i;
if (sc->port_res) {
bus_release_resource(dev, SYS_RES_IOPORT,
sc->port_rid, sc->port_res);
sc->port_res = 0;
}
if (sc->mem_res) {
bus_release_resource(dev, SYS_RES_MEMORY,
sc->mem_rid, sc->mem_res);
sc->mem_res = 0;
}
if (sc->mem_aux_res) {
bus_release_resource(dev, SYS_RES_MEMORY,
sc->mem_aux_rid, sc->mem_aux_res);
sc->mem_aux_res = 0;
}
if (sc->irq_res) {
bus_release_resource(dev, SYS_RES_IRQ,
sc->irq_rid, sc->irq_res);
sc->irq_res = 0;
}
if (sc->an_rid_buffer.an_dma_paddr) {
an_dma_free(sc, &sc->an_rid_buffer);
}
for (i = 0; i < AN_MAX_RX_DESC; i++)
if (sc->an_rx_buffer[i].an_dma_paddr) {
an_dma_free(sc, &sc->an_rx_buffer[i]);
}
for (i = 0; i < AN_MAX_TX_DESC; i++)
if (sc->an_tx_buffer[i].an_dma_paddr) {
an_dma_free(sc, &sc->an_tx_buffer[i]);
}
if (sc->an_dtag) {
bus_dma_tag_destroy(sc->an_dtag);
}
}
int
an_init_mpi350_desc(struct an_softc *sc)
{
struct an_command cmd_struct;
struct an_reply reply;
struct an_card_rid_desc an_rid_desc;
struct an_card_rx_desc an_rx_desc;
struct an_card_tx_desc an_tx_desc;
int i, desc;
AN_LOCK_ASSERT(sc);
if(!sc->an_rid_buffer.an_dma_paddr)
an_dma_malloc(sc, AN_RID_BUFFER_SIZE,
&sc->an_rid_buffer, 0);
for (i = 0; i < AN_MAX_RX_DESC; i++)
if(!sc->an_rx_buffer[i].an_dma_paddr)
an_dma_malloc(sc, AN_RX_BUFFER_SIZE,
&sc->an_rx_buffer[i], 0);
for (i = 0; i < AN_MAX_TX_DESC; i++)
if(!sc->an_tx_buffer[i].an_dma_paddr)
an_dma_malloc(sc, AN_TX_BUFFER_SIZE,
&sc->an_tx_buffer[i], 0);
/*
* Allocate RX descriptor
*/
bzero(&reply,sizeof(reply));
cmd_struct.an_cmd = AN_CMD_ALLOC_DESC;
cmd_struct.an_parm0 = AN_DESCRIPTOR_RX;
cmd_struct.an_parm1 = AN_RX_DESC_OFFSET;
cmd_struct.an_parm2 = AN_MAX_RX_DESC;
if (an_cmd_struct(sc, &cmd_struct, &reply)) {
if_printf(sc->an_ifp, "failed to allocate RX descriptor\n");
return(EIO);
}
for (desc = 0; desc < AN_MAX_RX_DESC; desc++) {
bzero(&an_rx_desc, sizeof(an_rx_desc));
an_rx_desc.an_valid = 1;
an_rx_desc.an_len = AN_RX_BUFFER_SIZE;
an_rx_desc.an_done = 0;
an_rx_desc.an_phys = sc->an_rx_buffer[desc].an_dma_paddr;
for (i = 0; i < sizeof(an_rx_desc) / 4; i++)
CSR_MEM_AUX_WRITE_4(sc, AN_RX_DESC_OFFSET
+ (desc * sizeof(an_rx_desc))
+ (i * 4),
((u_int32_t *)(void *)&an_rx_desc)[i]);
}
/*
* Allocate TX descriptor
*/
bzero(&reply,sizeof(reply));
cmd_struct.an_cmd = AN_CMD_ALLOC_DESC;
cmd_struct.an_parm0 = AN_DESCRIPTOR_TX;
cmd_struct.an_parm1 = AN_TX_DESC_OFFSET;
cmd_struct.an_parm2 = AN_MAX_TX_DESC;
if (an_cmd_struct(sc, &cmd_struct, &reply)) {
if_printf(sc->an_ifp, "failed to allocate TX descriptor\n");
return(EIO);
}
for (desc = 0; desc < AN_MAX_TX_DESC; desc++) {
bzero(&an_tx_desc, sizeof(an_tx_desc));
an_tx_desc.an_offset = 0;
an_tx_desc.an_eoc = 0;
an_tx_desc.an_valid = 0;
an_tx_desc.an_len = 0;
an_tx_desc.an_phys = sc->an_tx_buffer[desc].an_dma_paddr;
for (i = 0; i < sizeof(an_tx_desc) / 4; i++)
CSR_MEM_AUX_WRITE_4(sc, AN_TX_DESC_OFFSET
+ (desc * sizeof(an_tx_desc))
+ (i * 4),
((u_int32_t *)(void *)&an_tx_desc)[i]);
}
/*
* Allocate RID descriptor
*/
bzero(&reply,sizeof(reply));
cmd_struct.an_cmd = AN_CMD_ALLOC_DESC;
cmd_struct.an_parm0 = AN_DESCRIPTOR_HOSTRW;
cmd_struct.an_parm1 = AN_HOST_DESC_OFFSET;
cmd_struct.an_parm2 = 1;
if (an_cmd_struct(sc, &cmd_struct, &reply)) {
if_printf(sc->an_ifp, "failed to allocate host descriptor\n");
return(EIO);
}
bzero(&an_rid_desc, sizeof(an_rid_desc));
an_rid_desc.an_valid = 1;
an_rid_desc.an_len = AN_RID_BUFFER_SIZE;
an_rid_desc.an_rid = 0;
an_rid_desc.an_phys = sc->an_rid_buffer.an_dma_paddr;
for (i = 0; i < sizeof(an_rid_desc) / 4; i++)
CSR_MEM_AUX_WRITE_4(sc, AN_HOST_DESC_OFFSET + i * 4,
((u_int32_t *)(void *)&an_rid_desc)[i]);
return(0);
}
int
an_attach(struct an_softc *sc, int flags)
{
struct ifnet *ifp;
int error = EIO;
int i, nrate, mword;
u_int8_t r;
ifp = sc->an_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(sc->an_dev, "can not if_alloc()\n");
goto fail;
}
sc->an_gone = 0;
sc->an_associated = 0;
sc->an_monitor = 0;
sc->an_was_monitor = 0;
sc->an_flash_buffer = NULL;
/* Reset the NIC. */
AN_LOCK(sc);
an_reset(sc);
if (sc->mpi350) {
error = an_init_mpi350_desc(sc);
if (error)
goto fail;
}
/* Load factory config */
if (an_cmd(sc, AN_CMD_READCFG, 0)) {
device_printf(sc->an_dev, "failed to load config data\n");
goto fail;
}
/* Read the current configuration */
sc->an_config.an_type = AN_RID_GENCONFIG;
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_config)) {
device_printf(sc->an_dev, "read record failed\n");
goto fail;
}
/* Read the card capabilities */
sc->an_caps.an_type = AN_RID_CAPABILITIES;
sc->an_caps.an_len = sizeof(struct an_ltv_caps);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_caps)) {
device_printf(sc->an_dev, "read record failed\n");
goto fail;
}
/* Read ssid list */
sc->an_ssidlist.an_type = AN_RID_SSIDLIST;
sc->an_ssidlist.an_len = sizeof(struct an_ltv_ssidlist_new);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_ssidlist)) {
device_printf(sc->an_dev, "read record failed\n");
goto fail;
}
/* Read AP list */
sc->an_aplist.an_type = AN_RID_APLIST;
sc->an_aplist.an_len = sizeof(struct an_ltv_aplist);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_aplist)) {
device_printf(sc->an_dev, "read record failed\n");
goto fail;
}
#ifdef ANCACHE
/* Read the RSSI <-> dBm map */
sc->an_have_rssimap = 0;
if (sc->an_caps.an_softcaps & 8) {
sc->an_rssimap.an_type = AN_RID_RSSI_MAP;
sc->an_rssimap.an_len = sizeof(struct an_ltv_rssi_map);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_rssimap)) {
device_printf(sc->an_dev,
"unable to get RSSI <-> dBM map\n");
} else {
device_printf(sc->an_dev, "got RSSI <-> dBM map\n");
sc->an_have_rssimap = 1;
}
} else {
device_printf(sc->an_dev, "no RSSI <-> dBM map\n");
}
#endif
AN_UNLOCK(sc);
ifp->if_softc = sc;
if_initname(ifp, device_get_name(sc->an_dev),
device_get_unit(sc->an_dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = an_ioctl;
ifp->if_start = an_start;
ifp->if_init = an_init;
ifp->if_baudrate = 10000000;
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
IFQ_SET_READY(&ifp->if_snd);
bzero(sc->an_config.an_nodename, sizeof(sc->an_config.an_nodename));
bcopy(AN_DEFAULT_NODENAME, sc->an_config.an_nodename,
sizeof(AN_DEFAULT_NODENAME) - 1);
bzero(sc->an_ssidlist.an_entry[0].an_ssid,
sizeof(sc->an_ssidlist.an_entry[0].an_ssid));
bcopy(AN_DEFAULT_NETNAME, sc->an_ssidlist.an_entry[0].an_ssid,
sizeof(AN_DEFAULT_NETNAME) - 1);
sc->an_ssidlist.an_entry[0].an_len = strlen(AN_DEFAULT_NETNAME);
sc->an_config.an_opmode =
AN_OPMODE_INFRASTRUCTURE_STATION;
sc->an_tx_rate = 0;
bzero((char *)&sc->an_stats, sizeof(sc->an_stats));
nrate = 8;
ifmedia_init(&sc->an_ifmedia, 0, an_media_change, an_media_status);
if_printf(ifp, "supported rates: ");
#define ADD(s, o) ifmedia_add(&sc->an_ifmedia, \
IFM_MAKEWORD(IFM_IEEE80211, (s), (o), 0), 0, NULL)
ADD(IFM_AUTO, 0);
ADD(IFM_AUTO, IFM_IEEE80211_ADHOC);
for (i = 0; i < nrate; i++) {
r = sc->an_caps.an_rates[i];
mword = ieee80211_rate2media(NULL, r, IEEE80211_MODE_AUTO);
if (mword == 0)
continue;
printf("%s%d%sMbps", (i != 0 ? " " : ""),
(r & IEEE80211_RATE_VAL) / 2, ((r & 0x1) != 0 ? ".5" : ""));
ADD(mword, 0);
ADD(mword, IFM_IEEE80211_ADHOC);
}
printf("\n");
ifmedia_set(&sc->an_ifmedia, IFM_MAKEWORD(IFM_IEEE80211,
IFM_AUTO, 0, 0));
#undef ADD
/*
* Call MI attach routine.
*/
ether_ifattach(ifp, sc->an_caps.an_oemaddr);
callout_init_mtx(&sc->an_stat_ch, &sc->an_mtx, 0);
return(0);
fail:
AN_UNLOCK(sc);
mtx_destroy(&sc->an_mtx);
if (ifp != NULL)
if_free(ifp);
return(error);
}
int
an_detach(device_t dev)
{
struct an_softc *sc = device_get_softc(dev);
struct ifnet *ifp = sc->an_ifp;
if (sc->an_gone) {
device_printf(dev,"already unloaded\n");
return(0);
}
AN_LOCK(sc);
an_stop(sc);
sc->an_gone = 1;
ifmedia_removeall(&sc->an_ifmedia);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
AN_UNLOCK(sc);
ether_ifdetach(ifp);
bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
callout_drain(&sc->an_stat_ch);
if_free(ifp);
an_release_resources(dev);
mtx_destroy(&sc->an_mtx);
return (0);
}
static void
an_rxeof(struct an_softc *sc)
{
struct ifnet *ifp;
struct ether_header *eh;
struct ieee80211_frame *ih;
struct an_rxframe rx_frame;
struct an_rxframe_802_3 rx_frame_802_3;
struct mbuf *m;
int len, id, error = 0, i, count = 0;
int ieee80211_header_len;
u_char *bpf_buf;
u_short fc1;
struct an_card_rx_desc an_rx_desc;
u_int8_t *buf;
AN_LOCK_ASSERT(sc);
ifp = sc->an_ifp;
if (!sc->mpi350) {
id = CSR_READ_2(sc, AN_RX_FID);
if (sc->an_monitor && (ifp->if_flags & IFF_PROMISC)) {
/* read raw 802.11 packet */
bpf_buf = sc->buf_802_11;
/* read header */
if (an_read_data(sc, id, 0x0, (caddr_t)&rx_frame,
sizeof(rx_frame))) {
ifp->if_ierrors++;
return;
}
/*
* skip beacon by default since this increases the
* system load a lot
*/
if (!(sc->an_monitor & AN_MONITOR_INCLUDE_BEACON) &&
(rx_frame.an_frame_ctl &
IEEE80211_FC0_SUBTYPE_BEACON)) {
return;
}
if (sc->an_monitor & AN_MONITOR_AIRONET_HEADER) {
len = rx_frame.an_rx_payload_len
+ sizeof(rx_frame);
/* Check for insane frame length */
if (len > sizeof(sc->buf_802_11)) {
if_printf(ifp, "oversized packet "
"received (%d, %d)\n",
len, MCLBYTES);
ifp->if_ierrors++;
return;
}
bcopy((char *)&rx_frame,
bpf_buf, sizeof(rx_frame));
error = an_read_data(sc, id, sizeof(rx_frame),
(caddr_t)bpf_buf+sizeof(rx_frame),
rx_frame.an_rx_payload_len);
} else {
fc1=rx_frame.an_frame_ctl >> 8;
ieee80211_header_len =
sizeof(struct ieee80211_frame);
if ((fc1 & IEEE80211_FC1_DIR_TODS) &&
(fc1 & IEEE80211_FC1_DIR_FROMDS)) {
ieee80211_header_len += ETHER_ADDR_LEN;
}
len = rx_frame.an_rx_payload_len
+ ieee80211_header_len;
/* Check for insane frame length */
if (len > sizeof(sc->buf_802_11)) {
if_printf(ifp, "oversized packet "
"received (%d, %d)\n",
len, MCLBYTES);
ifp->if_ierrors++;
return;
}
ih = (struct ieee80211_frame *)bpf_buf;
bcopy((char *)&rx_frame.an_frame_ctl,
(char *)ih, ieee80211_header_len);
error = an_read_data(sc, id, sizeof(rx_frame) +
rx_frame.an_gaplen,
(caddr_t)ih +ieee80211_header_len,
rx_frame.an_rx_payload_len);
}
/* dump raw 802.11 packet to bpf and skip ip stack */
BPF_TAP(ifp, bpf_buf, len);
} else {
MGETHDR(m, M_NOWAIT, MT_DATA);
if (m == NULL) {
ifp->if_ierrors++;
return;
}
MCLGET(m, M_NOWAIT);
if (!(m->m_flags & M_EXT)) {
m_freem(m);
ifp->if_ierrors++;
return;
}
m->m_pkthdr.rcvif = ifp;
/* Read Ethernet encapsulated packet */
#ifdef ANCACHE
/* Read NIC frame header */
if (an_read_data(sc, id, 0, (caddr_t)&rx_frame,
sizeof(rx_frame))) {
m_freem(m);
ifp->if_ierrors++;
return;
}
#endif
/* Read in the 802_3 frame header */
if (an_read_data(sc, id, 0x34,
(caddr_t)&rx_frame_802_3,
sizeof(rx_frame_802_3))) {
m_freem(m);
ifp->if_ierrors++;
return;
}
if (rx_frame_802_3.an_rx_802_3_status != 0) {
m_freem(m);
ifp->if_ierrors++;
return;
}
/* Check for insane frame length */
len = rx_frame_802_3.an_rx_802_3_payload_len;
if (len > sizeof(sc->buf_802_11)) {
m_freem(m);
if_printf(ifp, "oversized packet "
"received (%d, %d)\n",
len, MCLBYTES);
ifp->if_ierrors++;
return;
}
m->m_pkthdr.len = m->m_len =
rx_frame_802_3.an_rx_802_3_payload_len + 12;
eh = mtod(m, struct ether_header *);
bcopy((char *)&rx_frame_802_3.an_rx_dst_addr,
(char *)&eh->ether_dhost, ETHER_ADDR_LEN);
bcopy((char *)&rx_frame_802_3.an_rx_src_addr,
(char *)&eh->ether_shost, ETHER_ADDR_LEN);
/* in mbuf header type is just before payload */
error = an_read_data(sc, id, 0x44,
(caddr_t)&(eh->ether_type),
rx_frame_802_3.an_rx_802_3_payload_len);
if (error) {
m_freem(m);
ifp->if_ierrors++;
return;
}
ifp->if_ipackets++;
/* Receive packet. */
#ifdef ANCACHE
an_cache_store(sc, eh, m,
rx_frame.an_rx_signal_strength,
rx_frame.an_rsvd0);
#endif
AN_UNLOCK(sc);
(*ifp->if_input)(ifp, m);
AN_LOCK(sc);
}
} else { /* MPI-350 */
for (count = 0; count < AN_MAX_RX_DESC; count++){
for (i = 0; i < sizeof(an_rx_desc) / 4; i++)
((u_int32_t *)(void *)&an_rx_desc)[i]
= CSR_MEM_AUX_READ_4(sc,
AN_RX_DESC_OFFSET
+ (count * sizeof(an_rx_desc))
+ (i * 4));
if (an_rx_desc.an_done && !an_rx_desc.an_valid) {
buf = sc->an_rx_buffer[count].an_dma_vaddr;
MGETHDR(m, M_NOWAIT, MT_DATA);
if (m == NULL) {
ifp->if_ierrors++;
return;
}
MCLGET(m, M_NOWAIT);
if (!(m->m_flags & M_EXT)) {
m_freem(m);
ifp->if_ierrors++;
return;
}
m->m_pkthdr.rcvif = ifp;
/* Read Ethernet encapsulated packet */
/*
* No ANCACHE support since we just get back
* an Ethernet packet no 802.11 info
*/
#if 0
#ifdef ANCACHE
/* Read NIC frame header */
bcopy(buf, (caddr_t)&rx_frame,
sizeof(rx_frame));
#endif
#endif
/* Check for insane frame length */
len = an_rx_desc.an_len + 12;
if (len > MCLBYTES) {
m_freem(m);
if_printf(ifp, "oversized packet "
"received (%d, %d)\n",
len, MCLBYTES);
ifp->if_ierrors++;
return;
}
m->m_pkthdr.len = m->m_len =
an_rx_desc.an_len + 12;
eh = mtod(m, struct ether_header *);
bcopy(buf, (char *)eh,
m->m_pkthdr.len);
ifp->if_ipackets++;
/* Receive packet. */
#if 0
#ifdef ANCACHE
an_cache_store(sc, eh, m,
rx_frame.an_rx_signal_strength,
rx_frame.an_rsvd0);
#endif
#endif
AN_UNLOCK(sc);
(*ifp->if_input)(ifp, m);
AN_LOCK(sc);
an_rx_desc.an_valid = 1;
an_rx_desc.an_len = AN_RX_BUFFER_SIZE;
an_rx_desc.an_done = 0;
an_rx_desc.an_phys =
sc->an_rx_buffer[count].an_dma_paddr;
for (i = 0; i < sizeof(an_rx_desc) / 4; i++)
CSR_MEM_AUX_WRITE_4(sc,
AN_RX_DESC_OFFSET
+ (count * sizeof(an_rx_desc))
+ (i * 4),
((u_int32_t *)(void *)&an_rx_desc)[i]);
} else {
if_printf(ifp, "Didn't get valid RX packet "
"%x %x %d\n",
an_rx_desc.an_done,
an_rx_desc.an_valid, an_rx_desc.an_len);
}
}
}
}
static void
an_txeof(struct an_softc *sc, int status)
{
struct ifnet *ifp;
int id, i;
AN_LOCK_ASSERT(sc);
ifp = sc->an_ifp;
sc->an_timer = 0;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
if (!sc->mpi350) {
id = CSR_READ_2(sc, AN_TX_CMP_FID(sc->mpi350));
if (status & AN_EV_TX_EXC) {
ifp->if_oerrors++;
} else
ifp->if_opackets++;
for (i = 0; i < AN_TX_RING_CNT; i++) {
if (id == sc->an_rdata.an_tx_ring[i]) {
sc->an_rdata.an_tx_ring[i] = 0;
break;
}
}
AN_INC(sc->an_rdata.an_tx_cons, AN_TX_RING_CNT);
} else { /* MPI 350 */
id = CSR_READ_2(sc, AN_TX_CMP_FID(sc->mpi350));
if (!sc->an_rdata.an_tx_empty){
if (status & AN_EV_TX_EXC) {
ifp->if_oerrors++;
} else
ifp->if_opackets++;
AN_INC(sc->an_rdata.an_tx_cons, AN_MAX_TX_DESC);
if (sc->an_rdata.an_tx_prod ==
sc->an_rdata.an_tx_cons)
sc->an_rdata.an_tx_empty = 1;
}
}
return;
}
/*
* We abuse the stats updater to check the current NIC status. This
* is important because we don't want to allow transmissions until
* the NIC has synchronized to the current cell (either as the master
* in an ad-hoc group, or as a station connected to an access point).
*
* Note that this function will be called via callout(9) with a lock held.
*/
static void
an_stats_update(void *xsc)
{
struct an_softc *sc;
struct ifnet *ifp;
sc = xsc;
AN_LOCK_ASSERT(sc);
ifp = sc->an_ifp;
if (sc->an_timer > 0 && --sc->an_timer == 0)
an_watchdog(sc);
sc->an_status.an_type = AN_RID_STATUS;
sc->an_status.an_len = sizeof(struct an_ltv_status);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_status))
return;
if (sc->an_status.an_opmode & AN_STATUS_OPMODE_IN_SYNC)
sc->an_associated = 1;
else
sc->an_associated = 0;
/* Don't do this while we're transmitting */
if (ifp->if_drv_flags & IFF_DRV_OACTIVE) {
callout_reset(&sc->an_stat_ch, hz, an_stats_update, sc);
return;
}
sc->an_stats.an_len = sizeof(struct an_ltv_stats);
sc->an_stats.an_type = AN_RID_32BITS_CUM;
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_stats.an_len))
return;
callout_reset(&sc->an_stat_ch, hz, an_stats_update, sc);
return;
}
void
an_intr(void *xsc)
{
struct an_softc *sc;
struct ifnet *ifp;
u_int16_t status;
sc = (struct an_softc*)xsc;
AN_LOCK(sc);
if (sc->an_gone) {
AN_UNLOCK(sc);
return;
}
ifp = sc->an_ifp;
/* Disable interrupts. */
CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), 0);
status = CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350));
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), ~AN_INTRS(sc->mpi350));
if (status & AN_EV_MIC) {
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_MIC);
}
if (status & AN_EV_LINKSTAT) {
if (CSR_READ_2(sc, AN_LINKSTAT(sc->mpi350))
== AN_LINKSTAT_ASSOCIATED)
sc->an_associated = 1;
else
sc->an_associated = 0;
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_LINKSTAT);
}
if (status & AN_EV_RX) {
an_rxeof(sc);
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_RX);
}
if (sc->mpi350 && status & AN_EV_TX_CPY) {
an_txeof(sc, status);
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_TX_CPY);
}
if (status & AN_EV_TX) {
an_txeof(sc, status);
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_TX);
}
if (status & AN_EV_TX_EXC) {
an_txeof(sc, status);
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_TX_EXC);
}
if (status & AN_EV_ALLOC)
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_ALLOC);
/* Re-enable interrupts. */
CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), AN_INTRS(sc->mpi350));
if ((ifp->if_flags & IFF_UP) && !IFQ_DRV_IS_EMPTY(&ifp->if_snd))
an_start_locked(ifp);
AN_UNLOCK(sc);
return;
}
static int
an_cmd_struct(struct an_softc *sc, struct an_command *cmd,
struct an_reply *reply)
{
int i;
AN_LOCK_ASSERT(sc);
for (i = 0; i != AN_TIMEOUT; i++) {
if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY) {
DELAY(1000);
} else
break;
}
if( i == AN_TIMEOUT) {
printf("BUSY\n");
return(ETIMEDOUT);
}
CSR_WRITE_2(sc, AN_PARAM0(sc->mpi350), cmd->an_parm0);
CSR_WRITE_2(sc, AN_PARAM1(sc->mpi350), cmd->an_parm1);
CSR_WRITE_2(sc, AN_PARAM2(sc->mpi350), cmd->an_parm2);
CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), cmd->an_cmd);
for (i = 0; i < AN_TIMEOUT; i++) {
if (CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350)) & AN_EV_CMD)
break;
DELAY(1000);
}
reply->an_resp0 = CSR_READ_2(sc, AN_RESP0(sc->mpi350));
reply->an_resp1 = CSR_READ_2(sc, AN_RESP1(sc->mpi350));
reply->an_resp2 = CSR_READ_2(sc, AN_RESP2(sc->mpi350));
reply->an_status = CSR_READ_2(sc, AN_STATUS(sc->mpi350));
if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY)
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350),
AN_EV_CLR_STUCK_BUSY);
/* Ack the command */
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_CMD);
if (i == AN_TIMEOUT)
return(ETIMEDOUT);
return(0);
}
static int
an_cmd(struct an_softc *sc, int cmd, int val)
{
int i, s = 0;
AN_LOCK_ASSERT(sc);
CSR_WRITE_2(sc, AN_PARAM0(sc->mpi350), val);
CSR_WRITE_2(sc, AN_PARAM1(sc->mpi350), 0);
CSR_WRITE_2(sc, AN_PARAM2(sc->mpi350), 0);
CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), cmd);
for (i = 0; i < AN_TIMEOUT; i++) {
if (CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350)) & AN_EV_CMD)
break;
else {
if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) == cmd)
CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), cmd);
}
}
for (i = 0; i < AN_TIMEOUT; i++) {
CSR_READ_2(sc, AN_RESP0(sc->mpi350));
CSR_READ_2(sc, AN_RESP1(sc->mpi350));
CSR_READ_2(sc, AN_RESP2(sc->mpi350));
s = CSR_READ_2(sc, AN_STATUS(sc->mpi350));
if ((s & AN_STAT_CMD_CODE) == (cmd & AN_STAT_CMD_CODE))
break;
}
/* Ack the command */
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_CMD);
if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY)
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_CLR_STUCK_BUSY);
if (i == AN_TIMEOUT)
return(ETIMEDOUT);
return(0);
}
/*
* This reset sequence may look a little strange, but this is the
* most reliable method I've found to really kick the NIC in the
* head and force it to reboot correctly.
*/
static void
an_reset(struct an_softc *sc)
{
if (sc->an_gone)
return;
AN_LOCK_ASSERT(sc);
an_cmd(sc, AN_CMD_ENABLE, 0);
an_cmd(sc, AN_CMD_FW_RESTART, 0);
an_cmd(sc, AN_CMD_NOOP2, 0);
if (an_cmd(sc, AN_CMD_FORCE_SYNCLOSS, 0) == ETIMEDOUT)
if_printf(sc->an_ifp, "reset failed\n");
an_cmd(sc, AN_CMD_DISABLE, 0);
return;
}
/*
* Read an LTV record from the NIC.
*/
static int
an_read_record(struct an_softc *sc, struct an_ltv_gen *ltv)
{
struct an_ltv_gen *an_ltv;
struct an_card_rid_desc an_rid_desc;
struct an_command cmd;
struct an_reply reply;
struct ifnet *ifp;
u_int16_t *ptr;
u_int8_t *ptr2;
int i, len;
AN_LOCK_ASSERT(sc);
if (ltv->an_len < 4 || ltv->an_type == 0)
return(EINVAL);
ifp = sc->an_ifp;
if (!sc->mpi350){
/* Tell the NIC to enter record read mode. */
if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_READ, ltv->an_type)) {
if_printf(ifp, "RID access failed\n");
return(EIO);
}
/* Seek to the record. */
if (an_seek(sc, ltv->an_type, 0, AN_BAP1)) {
if_printf(ifp, "seek to record failed\n");
return(EIO);
}
/*
* Read the length and record type and make sure they
* match what we expect (this verifies that we have enough
* room to hold all of the returned data).
* Length includes type but not length.
*/
len = CSR_READ_2(sc, AN_DATA1);
if (len > (ltv->an_len - 2)) {
if_printf(ifp, "record length mismatch -- expected %d, "
"got %d for Rid %x\n",
ltv->an_len - 2, len, ltv->an_type);
len = ltv->an_len - 2;
} else {
ltv->an_len = len + 2;
}
/* Now read the data. */
len -= 2; /* skip the type */
ptr = &ltv->an_val;
for (i = len; i > 1; i -= 2)
*ptr++ = CSR_READ_2(sc, AN_DATA1);
if (i) {
ptr2 = (u_int8_t *)ptr;
*ptr2 = CSR_READ_1(sc, AN_DATA1);
}
} else { /* MPI-350 */
if (!sc->an_rid_buffer.an_dma_vaddr)
return(EIO);
an_rid_desc.an_valid = 1;
an_rid_desc.an_len = AN_RID_BUFFER_SIZE;
an_rid_desc.an_rid = 0;
an_rid_desc.an_phys = sc->an_rid_buffer.an_dma_paddr;
bzero(sc->an_rid_buffer.an_dma_vaddr, AN_RID_BUFFER_SIZE);
bzero(&cmd, sizeof(cmd));
bzero(&reply, sizeof(reply));
cmd.an_cmd = AN_CMD_ACCESS|AN_ACCESS_READ;
cmd.an_parm0 = ltv->an_type;
for (i = 0; i < sizeof(an_rid_desc) / 4; i++)
CSR_MEM_AUX_WRITE_4(sc, AN_HOST_DESC_OFFSET + i * 4,
((u_int32_t *)(void *)&an_rid_desc)[i]);
if (an_cmd_struct(sc, &cmd, &reply)
|| reply.an_status & AN_CMD_QUAL_MASK) {
if_printf(ifp, "failed to read RID %x %x %x %x %x, %d\n",
ltv->an_type,
reply.an_status,
reply.an_resp0,
reply.an_resp1,
reply.an_resp2,
i);
return(EIO);
}
an_ltv = (struct an_ltv_gen *)sc->an_rid_buffer.an_dma_vaddr;
if (an_ltv->an_len + 2 < an_rid_desc.an_len) {
an_rid_desc.an_len = an_ltv->an_len;
}
len = an_rid_desc.an_len;
if (len > (ltv->an_len - 2)) {
if_printf(ifp, "record length mismatch -- expected %d, "
"got %d for Rid %x\n",
ltv->an_len - 2, len, ltv->an_type);
len = ltv->an_len - 2;
} else {
ltv->an_len = len + 2;
}
bcopy(&an_ltv->an_type,
&ltv->an_val,
len);
}
if (an_dump)
an_dump_record(sc, ltv, "Read");
return(0);
}
/*
* Same as read, except we inject data instead of reading it.
*/
static int
an_write_record(struct an_softc *sc, struct an_ltv_gen *ltv)
{
struct an_card_rid_desc an_rid_desc;
struct an_command cmd;
struct an_reply reply;
u_int16_t *ptr;
u_int8_t *ptr2;
int i, len;
AN_LOCK_ASSERT(sc);
if (an_dump)
an_dump_record(sc, ltv, "Write");
if (!sc->mpi350){
if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_READ, ltv->an_type))
return(EIO);
if (an_seek(sc, ltv->an_type, 0, AN_BAP1))
return(EIO);
/*
* Length includes type but not length.
*/
len = ltv->an_len - 2;
CSR_WRITE_2(sc, AN_DATA1, len);
len -= 2; /* skip the type */
ptr = &ltv->an_val;
for (i = len; i > 1; i -= 2)
CSR_WRITE_2(sc, AN_DATA1, *ptr++);
if (i) {
ptr2 = (u_int8_t *)ptr;
CSR_WRITE_1(sc, AN_DATA0, *ptr2);
}
if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_WRITE, ltv->an_type))
return(EIO);
} else {
/* MPI-350 */
for (i = 0; i != AN_TIMEOUT; i++) {
if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350))
& AN_CMD_BUSY) {
DELAY(10);
} else
break;
}
if (i == AN_TIMEOUT) {
printf("BUSY\n");
}
an_rid_desc.an_valid = 1;
an_rid_desc.an_len = ltv->an_len - 2;
an_rid_desc.an_rid = ltv->an_type;
an_rid_desc.an_phys = sc->an_rid_buffer.an_dma_paddr;
bcopy(&ltv->an_type, sc->an_rid_buffer.an_dma_vaddr,
an_rid_desc.an_len);
bzero(&cmd,sizeof(cmd));
bzero(&reply,sizeof(reply));
cmd.an_cmd = AN_CMD_ACCESS|AN_ACCESS_WRITE;
cmd.an_parm0 = ltv->an_type;
for (i = 0; i < sizeof(an_rid_desc) / 4; i++)
CSR_MEM_AUX_WRITE_4(sc, AN_HOST_DESC_OFFSET + i * 4,
((u_int32_t *)(void *)&an_rid_desc)[i]);
DELAY(100000);
if ((i = an_cmd_struct(sc, &cmd, &reply))) {
if_printf(sc->an_ifp,
"failed to write RID 1 %x %x %x %x %x, %d\n",
ltv->an_type,
reply.an_status,
reply.an_resp0,
reply.an_resp1,
reply.an_resp2,
i);
return(EIO);
}
if (reply.an_status & AN_CMD_QUAL_MASK) {
if_printf(sc->an_ifp,
"failed to write RID 2 %x %x %x %x %x, %d\n",
ltv->an_type,
reply.an_status,
reply.an_resp0,
reply.an_resp1,
reply.an_resp2,
i);
return(EIO);
}
DELAY(100000);
}
return(0);
}
static void
an_dump_record(struct an_softc *sc, struct an_ltv_gen *ltv, char *string)
{
u_int8_t *ptr2;
int len;
int i;
int count = 0;
char buf[17], temp;
len = ltv->an_len - 4;
if_printf(sc->an_ifp, "RID %4x, Length %4d, Mode %s\n",
ltv->an_type, ltv->an_len - 4, string);
if (an_dump == 1 || (an_dump == ltv->an_type)) {
if_printf(sc->an_ifp, "\t");
bzero(buf,sizeof(buf));
ptr2 = (u_int8_t *)&ltv->an_val;
for (i = len; i > 0; i--) {
printf("%02x ", *ptr2);
temp = *ptr2++;
if (isprint(temp))
buf[count] = temp;
else
buf[count] = '.';
if (++count == 16) {
count = 0;
printf("%s\n",buf);
if_printf(sc->an_ifp, "\t");
bzero(buf,sizeof(buf));
}
}
for (; count != 16; count++) {
printf(" ");
}
printf(" %s\n",buf);
}
}
static int
an_seek(struct an_softc *sc, int id, int off, int chan)
{
int i;
int selreg, offreg;
switch (chan) {
case AN_BAP0:
selreg = AN_SEL0;
offreg = AN_OFF0;
break;
case AN_BAP1:
selreg = AN_SEL1;
offreg = AN_OFF1;
break;
default:
if_printf(sc->an_ifp, "invalid data path: %x\n", chan);
return(EIO);
}
CSR_WRITE_2(sc, selreg, id);
CSR_WRITE_2(sc, offreg, off);
for (i = 0; i < AN_TIMEOUT; i++) {
if (!(CSR_READ_2(sc, offreg) & (AN_OFF_BUSY|AN_OFF_ERR)))
break;
}
if (i == AN_TIMEOUT)
return(ETIMEDOUT);
return(0);
}
static int
an_read_data(struct an_softc *sc, int id, int off, caddr_t buf, int len)
{
int i;
u_int16_t *ptr;
u_int8_t *ptr2;
if (off != -1) {
if (an_seek(sc, id, off, AN_BAP1))
return(EIO);
}
ptr = (u_int16_t *)buf;
for (i = len; i > 1; i -= 2)
*ptr++ = CSR_READ_2(sc, AN_DATA1);
if (i) {
ptr2 = (u_int8_t *)ptr;
*ptr2 = CSR_READ_1(sc, AN_DATA1);
}
return(0);
}
static int
an_write_data(struct an_softc *sc, int id, int off, caddr_t buf, int len)
{
int i;
u_int16_t *ptr;
u_int8_t *ptr2;
if (off != -1) {
if (an_seek(sc, id, off, AN_BAP0))
return(EIO);
}
ptr = (u_int16_t *)buf;
for (i = len; i > 1; i -= 2)
CSR_WRITE_2(sc, AN_DATA0, *ptr++);
if (i) {
ptr2 = (u_int8_t *)ptr;
CSR_WRITE_1(sc, AN_DATA0, *ptr2);
}
return(0);
}
/*
* Allocate a region of memory inside the NIC and zero
* it out.
*/
static int
an_alloc_nicmem(struct an_softc *sc, int len, int *id)
{
int i;
if (an_cmd(sc, AN_CMD_ALLOC_MEM, len)) {
if_printf(sc->an_ifp, "failed to allocate %d bytes on NIC\n",
len);
return(ENOMEM);
}
for (i = 0; i < AN_TIMEOUT; i++) {
if (CSR_READ_2(sc, AN_EVENT_STAT(sc->mpi350)) & AN_EV_ALLOC)
break;
}
if (i == AN_TIMEOUT)
return(ETIMEDOUT);
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_ALLOC);
*id = CSR_READ_2(sc, AN_ALLOC_FID);
if (an_seek(sc, *id, 0, AN_BAP0))
return(EIO);
for (i = 0; i < len / 2; i++)
CSR_WRITE_2(sc, AN_DATA0, 0);
return(0);
}
static void
an_setdef(struct an_softc *sc, struct an_req *areq)
{
struct ifnet *ifp;
struct an_ltv_genconfig *cfg;
struct an_ltv_ssidlist_new *ssid;
struct an_ltv_aplist *ap;
struct an_ltv_gen *sp;
ifp = sc->an_ifp;
AN_LOCK_ASSERT(sc);
switch (areq->an_type) {
case AN_RID_GENCONFIG:
cfg = (struct an_ltv_genconfig *)areq;
bcopy((char *)&cfg->an_macaddr, IF_LLADDR(sc->an_ifp),
ETHER_ADDR_LEN);
bcopy((char *)cfg, (char *)&sc->an_config,
sizeof(struct an_ltv_genconfig));
break;
case AN_RID_SSIDLIST:
ssid = (struct an_ltv_ssidlist_new *)areq;
bcopy((char *)ssid, (char *)&sc->an_ssidlist,
sizeof(struct an_ltv_ssidlist_new));
break;
case AN_RID_APLIST:
ap = (struct an_ltv_aplist *)areq;
bcopy((char *)ap, (char *)&sc->an_aplist,
sizeof(struct an_ltv_aplist));
break;
case AN_RID_TX_SPEED:
sp = (struct an_ltv_gen *)areq;
sc->an_tx_rate = sp->an_val;
/* Read the current configuration */
sc->an_config.an_type = AN_RID_GENCONFIG;
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
an_read_record(sc, (struct an_ltv_gen *)&sc->an_config);
cfg = &sc->an_config;
/* clear other rates and set the only one we want */
bzero(cfg->an_rates, sizeof(cfg->an_rates));
cfg->an_rates[0] = sc->an_tx_rate;
/* Save the new rate */
sc->an_config.an_type = AN_RID_GENCONFIG;
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
break;
case AN_RID_WEP_TEMP:
/* Cache the temp keys */
bcopy(areq,
&sc->an_temp_keys[((struct an_ltv_key *)areq)->kindex],
sizeof(struct an_ltv_key));
case AN_RID_WEP_PERM:
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
case AN_RID_LEAPUSERNAME:
case AN_RID_LEAPPASSWORD:
an_init_locked(sc);
/* Disable the MAC. */
an_cmd(sc, AN_CMD_DISABLE, 0);
/* Write the key */
an_write_record(sc, (struct an_ltv_gen *)areq);
/* Turn the MAC back on. */
an_cmd(sc, AN_CMD_ENABLE, 0);
break;
case AN_RID_MONITOR_MODE:
cfg = (struct an_ltv_genconfig *)areq;
bpfdetach(ifp);
if (ng_ether_detach_p != NULL)
(*ng_ether_detach_p) (ifp);
sc->an_monitor = cfg->an_len;
if (sc->an_monitor & AN_MONITOR) {
if (sc->an_monitor & AN_MONITOR_AIRONET_HEADER) {
bpfattach(ifp, DLT_AIRONET_HEADER,
sizeof(struct ether_header));
} else {
bpfattach(ifp, DLT_IEEE802_11,
sizeof(struct ether_header));
}
} else {
bpfattach(ifp, DLT_EN10MB,
sizeof(struct ether_header));
if (ng_ether_attach_p != NULL)
(*ng_ether_attach_p) (ifp);
}
break;
default:
if_printf(ifp, "unknown RID: %x\n", areq->an_type);
return;
}
/* Reinitialize the card. */
if (ifp->if_flags)
an_init_locked(sc);
return;
}
/*
* Derived from Linux driver to enable promiscious mode.
*/
static void
an_promisc(struct an_softc *sc, int promisc)
{
AN_LOCK_ASSERT(sc);
if (sc->an_was_monitor) {
an_reset(sc);
if (sc->mpi350)
an_init_mpi350_desc(sc);
}
if (sc->an_monitor || sc->an_was_monitor)
an_init_locked(sc);
sc->an_was_monitor = sc->an_monitor;
an_cmd(sc, AN_CMD_SET_MODE, promisc ? 0xffff : 0);
return;
}
static int
an_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
{
int error = 0;
int len;
int i, max;
struct an_softc *sc;
struct ifreq *ifr;
struct thread *td = curthread;
struct ieee80211req *ireq;
struct ieee80211_channel ch;
u_int8_t tmpstr[IEEE80211_NWID_LEN*2];
u_int8_t *tmpptr;
struct an_ltv_genconfig *config;
struct an_ltv_key *key;
struct an_ltv_status *status;
struct an_ltv_ssidlist_new *ssids;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
int mode;
struct aironet_ioctl l_ioctl;
sc = ifp->if_softc;
ifr = (struct ifreq *)data;
ireq = (struct ieee80211req *)data;
config = (struct an_ltv_genconfig *)&sc->areq;
key = (struct an_ltv_key *)&sc->areq;
status = (struct an_ltv_status *)&sc->areq;
ssids = (struct an_ltv_ssidlist_new *)&sc->areq;
2000-08-08 23:53:11 +00:00
if (sc->an_gone) {
error = ENODEV;
goto out;
}
switch (command) {
case SIOCSIFFLAGS:
AN_LOCK(sc);
if (ifp->if_flags & IFF_UP) {
if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
ifp->if_flags & IFF_PROMISC &&
!(sc->an_if_flags & IFF_PROMISC)) {
an_promisc(sc, 1);
} else if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
!(ifp->if_flags & IFF_PROMISC) &&
sc->an_if_flags & IFF_PROMISC) {
an_promisc(sc, 0);
} else
an_init_locked(sc);
} else {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
an_stop(sc);
}
sc->an_if_flags = ifp->if_flags;
AN_UNLOCK(sc);
error = 0;
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->an_ifmedia, command);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
/* The Aironet has no multicast filter. */
error = 0;
break;
case SIOCGAIRONET:
error = copyin(ifr->ifr_data, &sc->areq, sizeof(sc->areq));
if (error != 0)
break;
AN_LOCK(sc);
#ifdef ANCACHE
if (sc->areq.an_type == AN_RID_ZERO_CACHE) {
error = priv_check(td, PRIV_DRIVER);
if (error)
break;
sc->an_sigitems = sc->an_nextitem = 0;
break;
} else if (sc->areq.an_type == AN_RID_READ_CACHE) {
char *pt = (char *)&sc->areq.an_val;
bcopy((char *)&sc->an_sigitems, (char *)pt,
sizeof(int));
pt += sizeof(int);
sc->areq.an_len = sizeof(int) / 2;
bcopy((char *)&sc->an_sigcache, (char *)pt,
sizeof(struct an_sigcache) * sc->an_sigitems);
sc->areq.an_len += ((sizeof(struct an_sigcache) *
sc->an_sigitems) / 2) + 1;
} else
#endif
if (an_read_record(sc, (struct an_ltv_gen *)&sc->areq)) {
AN_UNLOCK(sc);
error = EINVAL;
break;
}
AN_UNLOCK(sc);
error = copyout(&sc->areq, ifr->ifr_data, sizeof(sc->areq));
break;
case SIOCSAIRONET:
if ((error = priv_check(td, PRIV_DRIVER)))
2000-08-08 23:53:11 +00:00
goto out;
AN_LOCK(sc);
error = copyin(ifr->ifr_data, &sc->areq, sizeof(sc->areq));
if (error != 0)
break;
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
case SIOCGPRIVATE_0: /* used by Cisco client utility */
if ((error = priv_check(td, PRIV_DRIVER)))
goto out;
error = copyin(ifr->ifr_data, &l_ioctl, sizeof(l_ioctl));
if (error)
goto out;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
mode = l_ioctl.command;
AN_LOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (mode >= AIROGCAP && mode <= AIROGSTATSD32) {
error = readrids(ifp, &l_ioctl);
} else if (mode >= AIROPCAP && mode <= AIROPLEAPUSR) {
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
error = writerids(ifp, &l_ioctl);
} else if (mode >= AIROFLSHRST && mode <= AIRORESTART) {
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
error = flashcard(ifp, &l_ioctl);
} else {
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
error =-1;
}
AN_UNLOCK(sc);
if (!error) {
/* copy out the updated command info */
error = copyout(&l_ioctl, ifr->ifr_data, sizeof(l_ioctl));
}
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
break;
case SIOCGPRIVATE_1: /* used by Cisco client utility */
if ((error = priv_check(td, PRIV_DRIVER)))
goto out;
error = copyin(ifr->ifr_data, &l_ioctl, sizeof(l_ioctl));
if (error)
goto out;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
l_ioctl.command = 0;
error = AIROMAGIC;
(void) copyout(&error, l_ioctl.data, sizeof(error));
error = 0;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
break;
case SIOCG80211:
sc->areq.an_len = sizeof(sc->areq);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/* was that a good idea DJA we are doing a short-cut */
switch (ireq->i_type) {
case IEEE80211_IOC_SSID:
AN_LOCK(sc);
if (ireq->i_val == -1) {
sc->areq.an_type = AN_RID_STATUS;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
len = status->an_ssidlen;
tmpptr = status->an_ssid;
} else if (ireq->i_val >= 0) {
sc->areq.an_type = AN_RID_SSIDLIST;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
max = (sc->areq.an_len - 4)
/ sizeof(struct an_ltv_ssid_entry);
if ( max > MAX_SSIDS ) {
printf("To many SSIDs only using "
"%d of %d\n",
MAX_SSIDS, max);
max = MAX_SSIDS;
}
if (ireq->i_val > max) {
error = EINVAL;
AN_UNLOCK(sc);
break;
} else {
len = ssids->an_entry[ireq->i_val].an_len;
tmpptr = ssids->an_entry[ireq->i_val].an_ssid;
}
} else {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
if (len > IEEE80211_NWID_LEN) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
ireq->i_len = len;
bzero(tmpstr, IEEE80211_NWID_LEN);
bcopy(tmpptr, tmpstr, len);
error = copyout(tmpstr, ireq->i_data,
IEEE80211_NWID_LEN);
break;
case IEEE80211_IOC_NUMSSIDS:
AN_LOCK(sc);
sc->areq.an_len = sizeof(sc->areq);
sc->areq.an_type = AN_RID_SSIDLIST;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
AN_UNLOCK(sc);
error = EINVAL;
break;
}
max = (sc->areq.an_len - 4)
/ sizeof(struct an_ltv_ssid_entry);
AN_UNLOCK(sc);
if ( max > MAX_SSIDS ) {
printf("To many SSIDs only using "
"%d of %d\n",
MAX_SSIDS, max);
max = MAX_SSIDS;
}
ireq->i_val = max;
break;
case IEEE80211_IOC_WEP:
AN_LOCK(sc);
sc->areq.an_type = AN_RID_ACTUALCFG;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
if (config->an_authtype & AN_AUTHTYPE_PRIVACY_IN_USE) {
if (config->an_authtype &
AN_AUTHTYPE_ALLOW_UNENCRYPTED)
ireq->i_val = IEEE80211_WEP_MIXED;
else
ireq->i_val = IEEE80211_WEP_ON;
} else {
ireq->i_val = IEEE80211_WEP_OFF;
}
break;
case IEEE80211_IOC_WEPKEY:
/*
* XXX: I'm not entierly convinced this is
* correct, but it's what is implemented in
* ancontrol so it will have to do until we get
* access to actual Cisco code.
*/
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (ireq->i_val < 0 || ireq->i_val > 8) {
error = EINVAL;
break;
}
len = 0;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (ireq->i_val < 5) {
AN_LOCK(sc);
sc->areq.an_type = AN_RID_WEP_TEMP;
for (i = 0; i < 5; i++) {
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
break;
}
if (key->kindex == 0xffff)
break;
if (key->kindex == ireq->i_val)
len = key->klen;
/* Required to get next entry */
sc->areq.an_type = AN_RID_WEP_PERM;
}
AN_UNLOCK(sc);
if (error != 0) {
break;
}
}
/* We aren't allowed to read the value of the
* key from the card so we just output zeros
* like we would if we could read the card, but
* denied the user access.
*/
bzero(tmpstr, len);
ireq->i_len = len;
error = copyout(tmpstr, ireq->i_data, len);
break;
case IEEE80211_IOC_NUMWEPKEYS:
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
ireq->i_val = 9; /* include home key */
break;
case IEEE80211_IOC_WEPTXKEY:
/*
* For some strange reason, you have to read all
* keys before you can read the txkey.
*/
AN_LOCK(sc);
sc->areq.an_type = AN_RID_WEP_TEMP;
for (i = 0; i < 5; i++) {
if (an_read_record(sc,
(struct an_ltv_gen *) &sc->areq)) {
error = EINVAL;
break;
}
if (key->kindex == 0xffff) {
break;
}
/* Required to get next entry */
sc->areq.an_type = AN_RID_WEP_PERM;
}
if (error != 0) {
AN_UNLOCK(sc);
break;
}
sc->areq.an_type = AN_RID_WEP_PERM;
key->kindex = 0xffff;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
ireq->i_val = key->mac[0];
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/*
* Check for home mode. Map home mode into
* 5th key since that is how it is stored on
* the card
*/
sc->areq.an_len = sizeof(struct an_ltv_genconfig);
sc->areq.an_type = AN_RID_GENCONFIG;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
error = EINVAL;
AN_UNLOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
break;
}
if (config->an_home_product & AN_HOME_NETWORK)
ireq->i_val = 4;
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_AUTHMODE:
AN_LOCK(sc);
sc->areq.an_type = AN_RID_ACTUALCFG;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
if ((config->an_authtype & AN_AUTHTYPE_MASK) ==
AN_AUTHTYPE_NONE) {
ireq->i_val = IEEE80211_AUTH_NONE;
} else if ((config->an_authtype & AN_AUTHTYPE_MASK) ==
AN_AUTHTYPE_OPEN) {
ireq->i_val = IEEE80211_AUTH_OPEN;
} else if ((config->an_authtype & AN_AUTHTYPE_MASK) ==
AN_AUTHTYPE_SHAREDKEY) {
ireq->i_val = IEEE80211_AUTH_SHARED;
} else
error = EINVAL;
break;
case IEEE80211_IOC_STATIONNAME:
AN_LOCK(sc);
sc->areq.an_type = AN_RID_ACTUALCFG;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
ireq->i_len = sizeof(config->an_nodename);
tmpptr = config->an_nodename;
bzero(tmpstr, IEEE80211_NWID_LEN);
bcopy(tmpptr, tmpstr, ireq->i_len);
error = copyout(tmpstr, ireq->i_data,
IEEE80211_NWID_LEN);
break;
case IEEE80211_IOC_CHANNEL:
AN_LOCK(sc);
sc->areq.an_type = AN_RID_STATUS;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
ireq->i_val = status->an_cur_channel;
break;
case IEEE80211_IOC_CURCHAN:
AN_LOCK(sc);
sc->areq.an_type = AN_RID_STATUS;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
bzero(&ch, sizeof(ch));
ch.ic_freq = ieee80211_ieee2mhz(status->an_cur_channel,
IEEE80211_CHAN_B);
ch.ic_flags = IEEE80211_CHAN_B;
ch.ic_ieee = status->an_cur_channel;
error = copyout(&ch, ireq->i_data, sizeof(ch));
break;
case IEEE80211_IOC_POWERSAVE:
AN_LOCK(sc);
sc->areq.an_type = AN_RID_ACTUALCFG;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
if (config->an_psave_mode == AN_PSAVE_NONE) {
ireq->i_val = IEEE80211_POWERSAVE_OFF;
} else if (config->an_psave_mode == AN_PSAVE_CAM) {
ireq->i_val = IEEE80211_POWERSAVE_CAM;
} else if (config->an_psave_mode == AN_PSAVE_PSP) {
ireq->i_val = IEEE80211_POWERSAVE_PSP;
} else if (config->an_psave_mode == AN_PSAVE_PSP_CAM) {
ireq->i_val = IEEE80211_POWERSAVE_PSP_CAM;
} else
error = EINVAL;
break;
case IEEE80211_IOC_POWERSAVESLEEP:
AN_LOCK(sc);
sc->areq.an_type = AN_RID_ACTUALCFG;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
AN_UNLOCK(sc);
ireq->i_val = config->an_listen_interval;
break;
}
break;
case SIOCS80211:
if ((error = priv_check(td, PRIV_NET80211_MANAGE)))
goto out;
AN_LOCK(sc);
sc->areq.an_len = sizeof(sc->areq);
/*
* We need a config structure for everything but the WEP
* key management and SSIDs so we get it now so avoid
* duplicating this code every time.
*/
if (ireq->i_type != IEEE80211_IOC_SSID &&
ireq->i_type != IEEE80211_IOC_WEPKEY &&
ireq->i_type != IEEE80211_IOC_WEPTXKEY) {
sc->areq.an_type = AN_RID_GENCONFIG;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
}
switch (ireq->i_type) {
case IEEE80211_IOC_SSID:
sc->areq.an_len = sizeof(sc->areq);
sc->areq.an_type = AN_RID_SSIDLIST;
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
if (ireq->i_len > IEEE80211_NWID_LEN) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
max = (sc->areq.an_len - 4)
/ sizeof(struct an_ltv_ssid_entry);
if ( max > MAX_SSIDS ) {
printf("To many SSIDs only using "
"%d of %d\n",
MAX_SSIDS, max);
max = MAX_SSIDS;
}
if (ireq->i_val > max) {
error = EINVAL;
AN_UNLOCK(sc);
break;
} else {
error = copyin(ireq->i_data,
ssids->an_entry[ireq->i_val].an_ssid,
ireq->i_len);
ssids->an_entry[ireq->i_val].an_len
= ireq->i_len;
sc->areq.an_len = sizeof(sc->areq);
sc->areq.an_type = AN_RID_SSIDLIST;
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
}
break;
case IEEE80211_IOC_WEP:
switch (ireq->i_val) {
case IEEE80211_WEP_OFF:
config->an_authtype &=
~(AN_AUTHTYPE_PRIVACY_IN_USE |
AN_AUTHTYPE_ALLOW_UNENCRYPTED);
break;
case IEEE80211_WEP_ON:
config->an_authtype |=
AN_AUTHTYPE_PRIVACY_IN_USE;
config->an_authtype &=
~AN_AUTHTYPE_ALLOW_UNENCRYPTED;
break;
case IEEE80211_WEP_MIXED:
config->an_authtype |=
AN_AUTHTYPE_PRIVACY_IN_USE |
AN_AUTHTYPE_ALLOW_UNENCRYPTED;
break;
default:
error = EINVAL;
break;
}
if (error != EINVAL)
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_WEPKEY:
if (ireq->i_val < 0 || ireq->i_val > 8 ||
ireq->i_len > 13) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
error = copyin(ireq->i_data, tmpstr, 13);
if (error != 0) {
AN_UNLOCK(sc);
break;
}
/*
* Map the 9th key into the home mode
* since that is how it is stored on
* the card
*/
bzero(&sc->areq, sizeof(struct an_ltv_key));
sc->areq.an_len = sizeof(struct an_ltv_key);
key->mac[0] = 1; /* The others are 0. */
if (ireq->i_val < 4) {
sc->areq.an_type = AN_RID_WEP_TEMP;
key->kindex = ireq->i_val;
} else {
sc->areq.an_type = AN_RID_WEP_PERM;
key->kindex = ireq->i_val - 4;
}
key->klen = ireq->i_len;
bcopy(tmpstr, key->key, key->klen);
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_WEPTXKEY:
if (ireq->i_val < 0 || ireq->i_val > 4) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/*
* Map the 5th key into the home mode
* since that is how it is stored on
* the card
*/
sc->areq.an_len = sizeof(struct an_ltv_genconfig);
sc->areq.an_type = AN_RID_ACTUALCFG;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (an_read_record(sc,
(struct an_ltv_gen *)&sc->areq)) {
error = EINVAL;
AN_UNLOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
break;
}
if (ireq->i_val == 4) {
config->an_home_product |= AN_HOME_NETWORK;
ireq->i_val = 0;
} else {
config->an_home_product &= ~AN_HOME_NETWORK;
}
sc->an_config.an_home_product
= config->an_home_product;
/* update configuration */
an_init_locked(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
bzero(&sc->areq, sizeof(struct an_ltv_key));
sc->areq.an_len = sizeof(struct an_ltv_key);
sc->areq.an_type = AN_RID_WEP_PERM;
key->kindex = 0xffff;
key->mac[0] = ireq->i_val;
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_AUTHMODE:
switch (ireq->i_val) {
case IEEE80211_AUTH_NONE:
config->an_authtype = AN_AUTHTYPE_NONE |
(config->an_authtype & ~AN_AUTHTYPE_MASK);
break;
case IEEE80211_AUTH_OPEN:
config->an_authtype = AN_AUTHTYPE_OPEN |
(config->an_authtype & ~AN_AUTHTYPE_MASK);
break;
case IEEE80211_AUTH_SHARED:
config->an_authtype = AN_AUTHTYPE_SHAREDKEY |
(config->an_authtype & ~AN_AUTHTYPE_MASK);
break;
default:
error = EINVAL;
}
if (error != EINVAL) {
an_setdef(sc, &sc->areq);
}
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_STATIONNAME:
if (ireq->i_len > 16) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
bzero(config->an_nodename, 16);
error = copyin(ireq->i_data,
config->an_nodename, ireq->i_len);
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_CHANNEL:
/*
* The actual range is 1-14, but if you set it
* to 0 you get the default so we let that work
* too.
*/
if (ireq->i_val < 0 || ireq->i_val >14) {
error = EINVAL;
AN_UNLOCK(sc);
break;
}
config->an_ds_channel = ireq->i_val;
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_POWERSAVE:
switch (ireq->i_val) {
case IEEE80211_POWERSAVE_OFF:
config->an_psave_mode = AN_PSAVE_NONE;
break;
case IEEE80211_POWERSAVE_CAM:
config->an_psave_mode = AN_PSAVE_CAM;
break;
case IEEE80211_POWERSAVE_PSP:
config->an_psave_mode = AN_PSAVE_PSP;
break;
case IEEE80211_POWERSAVE_PSP_CAM:
config->an_psave_mode = AN_PSAVE_PSP_CAM;
break;
default:
error = EINVAL;
break;
}
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
case IEEE80211_IOC_POWERSAVESLEEP:
config->an_listen_interval = ireq->i_val;
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
break;
default:
AN_UNLOCK(sc);
break;
}
/*
if (!error) {
AN_LOCK(sc);
an_setdef(sc, &sc->areq);
AN_UNLOCK(sc);
}
*/
break;
default:
error = ether_ioctl(ifp, command, data);
break;
}
out:
return(error != 0);
}
static int
an_init_tx_ring(struct an_softc *sc)
{
int i;
int id;
if (sc->an_gone)
return (0);
if (!sc->mpi350) {
for (i = 0; i < AN_TX_RING_CNT; i++) {
if (an_alloc_nicmem(sc, 1518 +
0x44, &id))
return(ENOMEM);
sc->an_rdata.an_tx_fids[i] = id;
sc->an_rdata.an_tx_ring[i] = 0;
}
}
sc->an_rdata.an_tx_prod = 0;
sc->an_rdata.an_tx_cons = 0;
sc->an_rdata.an_tx_empty = 1;
return(0);
}
static void
an_init(void *xsc)
{
struct an_softc *sc = xsc;
AN_LOCK(sc);
an_init_locked(sc);
AN_UNLOCK(sc);
}
static void
an_init_locked(struct an_softc *sc)
{
struct ifnet *ifp;
AN_LOCK_ASSERT(sc);
ifp = sc->an_ifp;
if (sc->an_gone)
return;
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
an_stop(sc);
sc->an_associated = 0;
/* Allocate the TX buffers */
if (an_init_tx_ring(sc)) {
an_reset(sc);
if (sc->mpi350)
an_init_mpi350_desc(sc);
if (an_init_tx_ring(sc)) {
if_printf(ifp, "tx buffer allocation failed\n");
return;
}
}
/* Set our MAC address. */
bcopy((char *)IF_LLADDR(sc->an_ifp),
(char *)&sc->an_config.an_macaddr, ETHER_ADDR_LEN);
if (ifp->if_flags & IFF_BROADCAST)
sc->an_config.an_rxmode = AN_RXMODE_BC_ADDR;
else
sc->an_config.an_rxmode = AN_RXMODE_ADDR;
if (ifp->if_flags & IFF_MULTICAST)
sc->an_config.an_rxmode = AN_RXMODE_BC_MC_ADDR;
if (ifp->if_flags & IFF_PROMISC) {
if (sc->an_monitor & AN_MONITOR) {
if (sc->an_monitor & AN_MONITOR_ANY_BSS) {
sc->an_config.an_rxmode |=
AN_RXMODE_80211_MONITOR_ANYBSS |
AN_RXMODE_NO_8023_HEADER;
} else {
sc->an_config.an_rxmode |=
AN_RXMODE_80211_MONITOR_CURBSS |
AN_RXMODE_NO_8023_HEADER;
}
}
}
#ifdef ANCACHE
if (sc->an_have_rssimap)
sc->an_config.an_rxmode |= AN_RXMODE_NORMALIZED_RSSI;
#endif
/* Set the ssid list */
sc->an_ssidlist.an_type = AN_RID_SSIDLIST;
sc->an_ssidlist.an_len = sizeof(struct an_ltv_ssidlist_new);
if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_ssidlist)) {
if_printf(ifp, "failed to set ssid list\n");
return;
}
/* Set the AP list */
sc->an_aplist.an_type = AN_RID_APLIST;
sc->an_aplist.an_len = sizeof(struct an_ltv_aplist);
if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_aplist)) {
if_printf(ifp, "failed to set AP list\n");
return;
}
/* Set the configuration in the NIC */
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
sc->an_config.an_type = AN_RID_GENCONFIG;
if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_config)) {
if_printf(ifp, "failed to set configuration\n");
return;
}
/* Enable the MAC */
if (an_cmd(sc, AN_CMD_ENABLE, 0)) {
if_printf(ifp, "failed to enable MAC\n");
return;
}
if (ifp->if_flags & IFF_PROMISC)
an_cmd(sc, AN_CMD_SET_MODE, 0xffff);
/* enable interrupts */
CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), AN_INTRS(sc->mpi350));
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
callout_reset(&sc->an_stat_ch, hz, an_stats_update, sc);
return;
}
static void
an_start(struct ifnet *ifp)
{
struct an_softc *sc;
sc = ifp->if_softc;
AN_LOCK(sc);
an_start_locked(ifp);
AN_UNLOCK(sc);
}
static void
an_start_locked(struct ifnet *ifp)
{
struct an_softc *sc;
struct mbuf *m0 = NULL;
struct an_txframe_802_3 tx_frame_802_3;
struct ether_header *eh;
int id, idx, i;
unsigned char txcontrol;
struct an_card_tx_desc an_tx_desc;
u_int8_t *buf;
sc = ifp->if_softc;
AN_LOCK_ASSERT(sc);
if (sc->an_gone)
return;
if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
return;
if (!sc->an_associated)
return;
/* We can't send in monitor mode so toss any attempts. */
if (sc->an_monitor && (ifp->if_flags & IFF_PROMISC)) {
for (;;) {
IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
if (m0 == NULL)
break;
m_freem(m0);
}
return;
}
idx = sc->an_rdata.an_tx_prod;
if (!sc->mpi350) {
bzero((char *)&tx_frame_802_3, sizeof(tx_frame_802_3));
while (sc->an_rdata.an_tx_ring[idx] == 0) {
IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
if (m0 == NULL)
break;
id = sc->an_rdata.an_tx_fids[idx];
eh = mtod(m0, struct ether_header *);
bcopy((char *)&eh->ether_dhost,
(char *)&tx_frame_802_3.an_tx_dst_addr,
ETHER_ADDR_LEN);
bcopy((char *)&eh->ether_shost,
(char *)&tx_frame_802_3.an_tx_src_addr,
ETHER_ADDR_LEN);
/* minus src/dest mac & type */
tx_frame_802_3.an_tx_802_3_payload_len =
m0->m_pkthdr.len - 12;
m_copydata(m0, sizeof(struct ether_header) - 2 ,
tx_frame_802_3.an_tx_802_3_payload_len,
(caddr_t)&sc->an_txbuf);
txcontrol = AN_TXCTL_8023 | AN_TXCTL_HW(sc->mpi350);
/* write the txcontrol only */
an_write_data(sc, id, 0x08, (caddr_t)&txcontrol,
sizeof(txcontrol));
/* 802_3 header */
an_write_data(sc, id, 0x34, (caddr_t)&tx_frame_802_3,
sizeof(struct an_txframe_802_3));
/* in mbuf header type is just before payload */
an_write_data(sc, id, 0x44, (caddr_t)&sc->an_txbuf,
tx_frame_802_3.an_tx_802_3_payload_len);
/*
* If there's a BPF listner, bounce a copy of
* this frame to him.
*/
BPF_MTAP(ifp, m0);
m_freem(m0);
m0 = NULL;
sc->an_rdata.an_tx_ring[idx] = id;
if (an_cmd(sc, AN_CMD_TX, id))
if_printf(ifp, "xmit failed\n");
AN_INC(idx, AN_TX_RING_CNT);
/*
* Set a timeout in case the chip goes out to lunch.
*/
sc->an_timer = 5;
}
} else { /* MPI-350 */
/* Disable interrupts. */
CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), 0);
while (sc->an_rdata.an_tx_empty ||
idx != sc->an_rdata.an_tx_cons) {
IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
if (m0 == NULL) {
break;
}
buf = sc->an_tx_buffer[idx].an_dma_vaddr;
eh = mtod(m0, struct ether_header *);
/* DJA optimize this to limit bcopy */
bcopy((char *)&eh->ether_dhost,
(char *)&tx_frame_802_3.an_tx_dst_addr,
ETHER_ADDR_LEN);
bcopy((char *)&eh->ether_shost,
(char *)&tx_frame_802_3.an_tx_src_addr,
ETHER_ADDR_LEN);
/* minus src/dest mac & type */
tx_frame_802_3.an_tx_802_3_payload_len =
m0->m_pkthdr.len - 12;
m_copydata(m0, sizeof(struct ether_header) - 2 ,
tx_frame_802_3.an_tx_802_3_payload_len,
(caddr_t)&sc->an_txbuf);
txcontrol = AN_TXCTL_8023 | AN_TXCTL_HW(sc->mpi350);
/* write the txcontrol only */
bcopy((caddr_t)&txcontrol, &buf[0x08],
sizeof(txcontrol));
/* 802_3 header */
bcopy((caddr_t)&tx_frame_802_3, &buf[0x34],
sizeof(struct an_txframe_802_3));
/* in mbuf header type is just before payload */
bcopy((caddr_t)&sc->an_txbuf, &buf[0x44],
tx_frame_802_3.an_tx_802_3_payload_len);
bzero(&an_tx_desc, sizeof(an_tx_desc));
an_tx_desc.an_offset = 0;
an_tx_desc.an_eoc = 1;
an_tx_desc.an_valid = 1;
an_tx_desc.an_len = 0x44 +
tx_frame_802_3.an_tx_802_3_payload_len;
an_tx_desc.an_phys
= sc->an_tx_buffer[idx].an_dma_paddr;
for (i = sizeof(an_tx_desc) / 4 - 1; i >= 0; i--) {
CSR_MEM_AUX_WRITE_4(sc, AN_TX_DESC_OFFSET
/* zero for now */
+ (0 * sizeof(an_tx_desc))
+ (i * 4),
((u_int32_t *)(void *)&an_tx_desc)[i]);
}
/*
* If there's a BPF listner, bounce a copy of
* this frame to him.
*/
BPF_MTAP(ifp, m0);
m_freem(m0);
m0 = NULL;
AN_INC(idx, AN_MAX_TX_DESC);
sc->an_rdata.an_tx_empty = 0;
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350), AN_EV_ALLOC);
/*
* Set a timeout in case the chip goes out to lunch.
*/
sc->an_timer = 5;
}
/* Re-enable interrupts. */
CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), AN_INTRS(sc->mpi350));
}
if (m0 != NULL)
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
sc->an_rdata.an_tx_prod = idx;
return;
}
void
an_stop(struct an_softc *sc)
{
struct ifnet *ifp;
int i;
AN_LOCK_ASSERT(sc);
if (sc->an_gone)
return;
ifp = sc->an_ifp;
an_cmd(sc, AN_CMD_FORCE_SYNCLOSS, 0);
CSR_WRITE_2(sc, AN_INT_EN(sc->mpi350), 0);
an_cmd(sc, AN_CMD_DISABLE, 0);
for (i = 0; i < AN_TX_RING_CNT; i++)
an_cmd(sc, AN_CMD_DEALLOC_MEM, sc->an_rdata.an_tx_fids[i]);
callout_stop(&sc->an_stat_ch);
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING|IFF_DRV_OACTIVE);
if (sc->an_flash_buffer) {
free(sc->an_flash_buffer, M_DEVBUF);
sc->an_flash_buffer = NULL;
}
}
static void
an_watchdog(struct an_softc *sc)
{
struct ifnet *ifp;
AN_LOCK_ASSERT(sc);
if (sc->an_gone)
return;
ifp = sc->an_ifp;
if_printf(ifp, "device timeout\n");
an_reset(sc);
if (sc->mpi350)
an_init_mpi350_desc(sc);
an_init_locked(sc);
ifp->if_oerrors++;
}
2009-02-04 20:39:45 +00:00
int
an_shutdown(device_t dev)
{
struct an_softc *sc;
sc = device_get_softc(dev);
AN_LOCK(sc);
an_stop(sc);
sc->an_gone = 1;
AN_UNLOCK(sc);
return (0);
}
void
an_resume(device_t dev)
{
struct an_softc *sc;
struct ifnet *ifp;
int i;
sc = device_get_softc(dev);
AN_LOCK(sc);
ifp = sc->an_ifp;
sc->an_gone = 0;
an_reset(sc);
if (sc->mpi350)
an_init_mpi350_desc(sc);
an_init_locked(sc);
/* Recovery temporary keys */
for (i = 0; i < 4; i++) {
sc->areq.an_type = AN_RID_WEP_TEMP;
sc->areq.an_len = sizeof(struct an_ltv_key);
bcopy(&sc->an_temp_keys[i],
&sc->areq, sizeof(struct an_ltv_key));
an_setdef(sc, &sc->areq);
}
if (ifp->if_flags & IFF_UP)
an_start_locked(ifp);
AN_UNLOCK(sc);
return;
}
#ifdef ANCACHE
/* Aironet signal strength cache code.
* store signal/noise/quality on per MAC src basis in
* a small fixed cache. The cache wraps if > MAX slots
* used. The cache may be zeroed out to start over.
* Two simple filters exist to reduce computation:
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
* 1. ip only (literally 0x800, ETHERTYPE_IP) which may be used
* to ignore some packets. It defaults to ip only.
* it could be used to focus on broadcast, non-IP 802.11 beacons.
* 2. multicast/broadcast only. This may be used to
* ignore unicast packets and only cache signal strength
* for multicast/broadcast packets (beacons); e.g., Mobile-IP
* beacons and not unicast traffic.
*
* The cache stores (MAC src(index), IP src (major clue), signal,
* quality, noise)
*
* No apologies for storing IP src here. It's easy and saves much
* trouble elsewhere. The cache is assumed to be INET dependent,
* although it need not be.
*
* Note: the Aironet only has a single byte of signal strength value
* in the rx frame header, and it's not scaled to anything sensible.
* This is kind of lame, but it's all we've got.
*/
#ifdef documentation
int an_sigitems; /* number of cached entries */
struct an_sigcache an_sigcache[MAXANCACHE]; /* array of cache entries */
int an_nextitem; /* index/# of entries */
#endif
/* control variables for cache filtering. Basic idea is
* to reduce cost (e.g., to only Mobile-IP agent beacons
* which are broadcast or multicast). Still you might
* want to measure signal strength anth unicast ping packets
* on a pt. to pt. ant. setup.
*/
/* set true if you want to limit cache items to broadcast/mcast
* only packets (not unicast). Useful for mobile-ip beacons which
* are broadcast/multicast at network layer. Default is all packets
* so ping/unicast anll work say anth pt. to pt. antennae setup.
*/
static int an_cache_mcastonly = 0;
SYSCTL_INT(_hw_an, OID_AUTO, an_cache_mcastonly, CTLFLAG_RW,
&an_cache_mcastonly, 0, "");
/* set true if you want to limit cache items to IP packets only
*/
static int an_cache_iponly = 1;
SYSCTL_INT(_hw_an, OID_AUTO, an_cache_iponly, CTLFLAG_RW,
&an_cache_iponly, 0, "");
/*
* an_cache_store, per rx packet store signal
* strength in MAC (src) indexed cache.
*/
static void
an_cache_store(struct an_softc *sc, struct ether_header *eh, struct mbuf *m,
u_int8_t rx_rssi, u_int8_t rx_quality)
{
struct ip *ip = 0;
int i;
static int cache_slot = 0; /* use this cache entry */
static int wrapindex = 0; /* next "free" cache entry */
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
int type_ipv4 = 0;
/* filters:
* 1. ip only
* 2. configurable filter to throw out unicast packets,
* keep multicast only.
*/
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if ((ntohs(eh->ether_type) == ETHERTYPE_IP)) {
type_ipv4 = 1;
}
/* filter for ip packets only
*/
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if ( an_cache_iponly && !type_ipv4) {
return;
}
/* filter for broadcast/multicast only
*/
if (an_cache_mcastonly && ((eh->ether_dhost[0] & 1) == 0)) {
return;
}
#ifdef SIGDEBUG
if_printf(sc->an_ifp, "q value %x (MSB=0x%x, LSB=0x%x) \n",
rx_rssi & 0xffff, rx_rssi >> 8, rx_rssi & 0xff);
#endif
/* find the ip header. we want to store the ip_src
* address.
*/
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (type_ipv4) {
ip = mtod(m, struct ip *);
}
/* do a linear search for a matching MAC address
* in the cache table
* . MAC address is 6 bytes,
* . var w_nextitem holds total number of entries already cached
*/
for (i = 0; i < sc->an_nextitem; i++) {
if (! bcmp(eh->ether_shost , sc->an_sigcache[i].macsrc, 6 )) {
/* Match!,
* so we already have this entry,
* update the data
*/
break;
}
}
/* did we find a matching mac address?
* if yes, then overwrite a previously existing cache entry
*/
if (i < sc->an_nextitem ) {
cache_slot = i;
}
/* else, have a new address entry,so
* add this new entry,
* if table full, then we need to replace LRU entry
*/
else {
/* check for space in cache table
* note: an_nextitem also holds number of entries
* added in the cache table
*/
if ( sc->an_nextitem < MAXANCACHE ) {
cache_slot = sc->an_nextitem;
sc->an_nextitem++;
sc->an_sigitems = sc->an_nextitem;
}
/* no space found, so simply wrap anth wrap index
* and "zap" the next entry
*/
else {
if (wrapindex == MAXANCACHE) {
wrapindex = 0;
}
cache_slot = wrapindex++;
}
}
/* invariant: cache_slot now points at some slot
* in cache.
*/
if (cache_slot < 0 || cache_slot >= MAXANCACHE) {
log(LOG_ERR, "an_cache_store, bad index: %d of "
"[0..%d], gross cache error\n",
cache_slot, MAXANCACHE);
return;
}
/* store items in cache
* .ip source address
* .mac src
* .signal, etc.
*/
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (type_ipv4) {
sc->an_sigcache[cache_slot].ipsrc = ip->ip_src.s_addr;
}
bcopy( eh->ether_shost, sc->an_sigcache[cache_slot].macsrc, 6);
switch (an_cache_mode) {
case DBM:
if (sc->an_have_rssimap) {
sc->an_sigcache[cache_slot].signal =
- sc->an_rssimap.an_entries[rx_rssi].an_rss_dbm;
sc->an_sigcache[cache_slot].quality =
- sc->an_rssimap.an_entries[rx_quality].an_rss_dbm;
} else {
sc->an_sigcache[cache_slot].signal = rx_rssi - 100;
sc->an_sigcache[cache_slot].quality = rx_quality - 100;
}
break;
case PERCENT:
if (sc->an_have_rssimap) {
sc->an_sigcache[cache_slot].signal =
sc->an_rssimap.an_entries[rx_rssi].an_rss_pct;
sc->an_sigcache[cache_slot].quality =
sc->an_rssimap.an_entries[rx_quality].an_rss_pct;
} else {
if (rx_rssi > 100)
rx_rssi = 100;
if (rx_quality > 100)
rx_quality = 100;
sc->an_sigcache[cache_slot].signal = rx_rssi;
sc->an_sigcache[cache_slot].quality = rx_quality;
}
break;
case RAW:
sc->an_sigcache[cache_slot].signal = rx_rssi;
sc->an_sigcache[cache_slot].quality = rx_quality;
break;
}
sc->an_sigcache[cache_slot].noise = 0;
return;
}
#endif
static int
an_media_change(struct ifnet *ifp)
{
struct an_softc *sc = ifp->if_softc;
struct an_ltv_genconfig *cfg;
int otype = sc->an_config.an_opmode;
int orate = sc->an_tx_rate;
AN_LOCK(sc);
2003-06-28 06:17:26 +00:00
sc->an_tx_rate = ieee80211_media2rate(
IFM_SUBTYPE(sc->an_ifmedia.ifm_cur->ifm_media));
if (sc->an_tx_rate < 0)
sc->an_tx_rate = 0;
if (orate != sc->an_tx_rate) {
/* Read the current configuration */
sc->an_config.an_type = AN_RID_GENCONFIG;
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
an_read_record(sc, (struct an_ltv_gen *)&sc->an_config);
cfg = &sc->an_config;
/* clear other rates and set the only one we want */
bzero(cfg->an_rates, sizeof(cfg->an_rates));
cfg->an_rates[0] = sc->an_tx_rate;
/* Save the new rate */
sc->an_config.an_type = AN_RID_GENCONFIG;
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
}
if ((sc->an_ifmedia.ifm_cur->ifm_media & IFM_IEEE80211_ADHOC) != 0)
sc->an_config.an_opmode &= ~AN_OPMODE_INFRASTRUCTURE_STATION;
else
sc->an_config.an_opmode |= AN_OPMODE_INFRASTRUCTURE_STATION;
if (otype != sc->an_config.an_opmode ||
orate != sc->an_tx_rate)
an_init_locked(sc);
AN_UNLOCK(sc);
return(0);
}
static void
an_media_status(struct ifnet *ifp, struct ifmediareq *imr)
{
struct an_ltv_status status;
struct an_softc *sc = ifp->if_softc;
imr->ifm_active = IFM_IEEE80211;
AN_LOCK(sc);
status.an_len = sizeof(status);
status.an_type = AN_RID_STATUS;
if (an_read_record(sc, (struct an_ltv_gen *)&status)) {
/* If the status read fails, just lie. */
imr->ifm_active = sc->an_ifmedia.ifm_cur->ifm_media;
imr->ifm_status = IFM_AVALID|IFM_ACTIVE;
}
if (sc->an_tx_rate == 0) {
imr->ifm_active = IFM_IEEE80211|IFM_AUTO;
}
if (sc->an_config.an_opmode == AN_OPMODE_IBSS_ADHOC)
imr->ifm_active |= IFM_IEEE80211_ADHOC;
2003-06-28 06:17:26 +00:00
imr->ifm_active |= ieee80211_rate2media(NULL,
status.an_current_tx_rate, IEEE80211_MODE_AUTO);
imr->ifm_status = IFM_AVALID;
if (status.an_opmode & AN_STATUS_OPMODE_ASSOCIATED)
imr->ifm_status |= IFM_ACTIVE;
AN_UNLOCK(sc);
}
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/********************** Cisco utility support routines *************/
/*
* ReadRids & WriteRids derived from Cisco driver additions to Ben Reed's
* Linux driver
*/
static int
readrids(struct ifnet *ifp, struct aironet_ioctl *l_ioctl)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
unsigned short rid;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
struct an_softc *sc;
int error;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
switch (l_ioctl->command) {
case AIROGCAP:
rid = AN_RID_CAPABILITIES;
break;
case AIROGCFG:
rid = AN_RID_GENCONFIG;
break;
case AIROGSLIST:
rid = AN_RID_SSIDLIST;
break;
case AIROGVLIST:
rid = AN_RID_APLIST;
break;
case AIROGDRVNAM:
rid = AN_RID_DRVNAME;
break;
case AIROGEHTENC:
rid = AN_RID_ENCAPPROTO;
break;
case AIROGWEPKTMP:
rid = AN_RID_WEP_TEMP;
break;
case AIROGWEPKNV:
rid = AN_RID_WEP_PERM;
break;
case AIROGSTAT:
rid = AN_RID_STATUS;
break;
case AIROGSTATSD32:
rid = AN_RID_32BITS_DELTA;
break;
case AIROGSTATSC32:
rid = AN_RID_32BITS_CUM;
break;
default:
rid = 999;
break;
}
if (rid == 999) /* Is bad command */
return -EINVAL;
sc = ifp->if_softc;
sc->areq.an_len = AN_MAX_DATALEN;
sc->areq.an_type = rid;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
an_read_record(sc, (struct an_ltv_gen *)&sc->areq);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
l_ioctl->len = sc->areq.an_len - 4; /* just data */
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
AN_UNLOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/* the data contains the length at first */
if (copyout(&(sc->areq.an_len), l_ioctl->data,
sizeof(sc->areq.an_len))) {
error = -EFAULT;
goto lock_exit;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
}
/* Just copy the data back */
if (copyout(&(sc->areq.an_val), l_ioctl->data + 2,
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
l_ioctl->len)) {
error = -EFAULT;
goto lock_exit;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
}
error = 0;
lock_exit:
AN_LOCK(sc);
return (error);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
}
static int
writerids(struct ifnet *ifp, struct aironet_ioctl *l_ioctl)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
struct an_softc *sc;
int rid, command, error;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
sc = ifp->if_softc;
AN_LOCK_ASSERT(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
rid = 0;
command = l_ioctl->command;
switch (command) {
case AIROPSIDS:
rid = AN_RID_SSIDLIST;
break;
case AIROPCAP:
rid = AN_RID_CAPABILITIES;
break;
case AIROPAPLIST:
rid = AN_RID_APLIST;
break;
case AIROPCFG:
rid = AN_RID_GENCONFIG;
break;
case AIROPMACON:
an_cmd(sc, AN_CMD_ENABLE, 0);
return 0;
break;
case AIROPMACOFF:
an_cmd(sc, AN_CMD_DISABLE, 0);
return 0;
break;
case AIROPSTCLR:
/*
* This command merely clears the counts does not actually
* store any data only reads rid. But as it changes the cards
* state, I put it in the writerid routines.
*/
rid = AN_RID_32BITS_DELTACLR;
sc = ifp->if_softc;
sc->areq.an_len = AN_MAX_DATALEN;
sc->areq.an_type = rid;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
an_read_record(sc, (struct an_ltv_gen *)&sc->areq);
l_ioctl->len = sc->areq.an_len - 4; /* just data */
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
AN_UNLOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/* the data contains the length at first */
error = copyout(&(sc->areq.an_len), l_ioctl->data,
sizeof(sc->areq.an_len));
if (error) {
AN_LOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -EFAULT;
}
/* Just copy the data */
error = copyout(&(sc->areq.an_val), l_ioctl->data + 2,
l_ioctl->len);
AN_LOCK(sc);
if (error)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -EFAULT;
return 0;
break;
case AIROPWEPKEY:
rid = AN_RID_WEP_TEMP;
break;
case AIROPWEPKEYNV:
rid = AN_RID_WEP_PERM;
break;
case AIROPLEAPUSR:
rid = AN_RID_LEAPUSERNAME;
break;
case AIROPLEAPPWD:
rid = AN_RID_LEAPPASSWORD;
break;
default:
return -EOPNOTSUPP;
}
if (rid) {
if (l_ioctl->len > sizeof(sc->areq.an_val) + 4)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -EINVAL;
sc->areq.an_len = l_ioctl->len + 4; /* add type & length */
sc->areq.an_type = rid;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/* Just copy the data back */
AN_UNLOCK(sc);
error = copyin((l_ioctl->data) + 2, &sc->areq.an_val,
l_ioctl->len);
AN_LOCK(sc);
if (error)
return -EFAULT;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
an_cmd(sc, AN_CMD_DISABLE, 0);
an_write_record(sc, (struct an_ltv_gen *)&sc->areq);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
an_cmd(sc, AN_CMD_ENABLE, 0);
return 0;
}
return -EOPNOTSUPP;
}
/*
* General Flash utilities derived from Cisco driver additions to Ben Reed's
* Linux driver
*/
#define FLASH_DELAY(_sc, x) msleep(ifp, &(_sc)->an_mtx, PZERO, \
"flash", ((x) / hz) + 1);
#define FLASH_COMMAND 0x7e7e
#define FLASH_SIZE 32 * 1024
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
static int
unstickbusy(struct ifnet *ifp)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
struct an_softc *sc = ifp->if_softc;
if (CSR_READ_2(sc, AN_COMMAND(sc->mpi350)) & AN_CMD_BUSY) {
CSR_WRITE_2(sc, AN_EVENT_ACK(sc->mpi350),
AN_EV_CLR_STUCK_BUSY);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return 1;
}
return 0;
}
/*
* Wait for busy completion from card wait for delay uSec's Return true for
* success meaning command reg is clear
*/
static int
WaitBusy(struct ifnet *ifp, int uSec)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
int statword = 0xffff;
int delay = 0;
struct an_softc *sc = ifp->if_softc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
while ((statword & AN_CMD_BUSY) && delay <= (1000 * 100)) {
FLASH_DELAY(sc, 10);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
delay += 10;
statword = CSR_READ_2(sc, AN_COMMAND(sc->mpi350));
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if ((AN_CMD_BUSY & statword) && (delay % 200)) {
unstickbusy(ifp);
}
}
return 0 == (AN_CMD_BUSY & statword);
}
/*
* STEP 1) Disable MAC and do soft reset on card.
*/
static int
cmdreset(struct ifnet *ifp)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
int status;
struct an_softc *sc = ifp->if_softc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
AN_LOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
an_stop(sc);
an_cmd(sc, AN_CMD_DISABLE, 0);
if (!(status = WaitBusy(ifp, AN_TIMEOUT))) {
if_printf(ifp, "Waitbusy hang b4 RESET =%d\n", status);
AN_UNLOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -EBUSY;
}
CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), AN_CMD_FW_RESTART);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
FLASH_DELAY(sc, 1000); /* WAS 600 12/7/00 */
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (!(status = WaitBusy(ifp, 100))) {
if_printf(ifp, "Waitbusy hang AFTER RESET =%d\n", status);
AN_UNLOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -EBUSY;
}
AN_UNLOCK(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return 0;
}
/*
* STEP 2) Put the card in legendary flash mode
*/
static int
setflashmode(struct ifnet *ifp)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
int status;
struct an_softc *sc = ifp->if_softc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
CSR_WRITE_2(sc, AN_SW0(sc->mpi350), FLASH_COMMAND);
CSR_WRITE_2(sc, AN_SW1(sc->mpi350), FLASH_COMMAND);
CSR_WRITE_2(sc, AN_SW0(sc->mpi350), FLASH_COMMAND);
CSR_WRITE_2(sc, AN_COMMAND(sc->mpi350), FLASH_COMMAND);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/*
* mdelay(500); // 500ms delay
*/
FLASH_DELAY(sc, 500);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (!(status = WaitBusy(ifp, AN_TIMEOUT))) {
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
printf("Waitbusy hang after setflash mode\n");
return -EIO;
}
return 0;
}
/*
* Get a character from the card matching matchbyte Step 3)
*/
static int
flashgchar(struct ifnet *ifp, int matchbyte, int dwelltime)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
int rchar;
unsigned char rbyte = 0;
int success = -1;
struct an_softc *sc = ifp->if_softc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
do {
rchar = CSR_READ_2(sc, AN_SW1(sc->mpi350));
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (dwelltime && !(0x8000 & rchar)) {
dwelltime -= 10;
FLASH_DELAY(sc, 10);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
continue;
}
rbyte = 0xff & rchar;
if ((rbyte == matchbyte) && (0x8000 & rchar)) {
CSR_WRITE_2(sc, AN_SW1(sc->mpi350), 0);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
success = 1;
break;
}
if (rbyte == 0x81 || rbyte == 0x82 || rbyte == 0x83 || rbyte == 0x1a || 0xffff == rchar)
break;
CSR_WRITE_2(sc, AN_SW1(sc->mpi350), 0);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
} while (dwelltime > 0);
return success;
}
/*
* Put character to SWS0 wait for dwelltime x 50us for echo .
*/
static int
flashpchar(struct ifnet *ifp, int byte, int dwelltime)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
int echo;
int pollbusy, waittime;
struct an_softc *sc = ifp->if_softc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
byte |= 0x8000;
if (dwelltime == 0)
dwelltime = 200;
waittime = dwelltime;
/*
* Wait for busy bit d15 to go false indicating buffer empty
*/
do {
pollbusy = CSR_READ_2(sc, AN_SW0(sc->mpi350));
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (pollbusy & 0x8000) {
FLASH_DELAY(sc, 50);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
waittime -= 50;
continue;
} else
break;
}
while (waittime >= 0);
/* timeout for busy clear wait */
if (waittime <= 0) {
if_printf(ifp, "flash putchar busywait timeout!\n");
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -1;
}
/*
* Port is clear now write byte and wait for it to echo back
*/
do {
CSR_WRITE_2(sc, AN_SW0(sc->mpi350), byte);
FLASH_DELAY(sc, 50);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
dwelltime -= 50;
echo = CSR_READ_2(sc, AN_SW1(sc->mpi350));
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
} while (dwelltime >= 0 && echo != byte);
CSR_WRITE_2(sc, AN_SW1(sc->mpi350), 0);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return echo == byte;
}
/*
* Transfer 32k of firmware data from user buffer to our buffer and send to
* the card
*/
static int
flashputbuf(struct ifnet *ifp)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
unsigned short *bufp;
int nwords;
struct an_softc *sc = ifp->if_softc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
/* Write stuff */
bufp = sc->an_flash_buffer;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if (!sc->mpi350) {
CSR_WRITE_2(sc, AN_AUX_PAGE, 0x100);
CSR_WRITE_2(sc, AN_AUX_OFFSET, 0);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
for (nwords = 0; nwords != FLASH_SIZE / 2; nwords++) {
CSR_WRITE_2(sc, AN_AUX_DATA, bufp[nwords] & 0xffff);
}
} else {
for (nwords = 0; nwords != FLASH_SIZE / 4; nwords++) {
CSR_MEM_AUX_WRITE_4(sc, 0x8000,
((u_int32_t *)bufp)[nwords] & 0xffff);
}
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
}
CSR_WRITE_2(sc, AN_SW0(sc->mpi350), 0x8000);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return 0;
}
/*
* After flashing restart the card.
*/
static int
flashrestart(struct ifnet *ifp)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
int status = 0;
struct an_softc *sc = ifp->if_softc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
FLASH_DELAY(sc, 1024); /* Added 12/7/00 */
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
an_init_locked(sc);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
FLASH_DELAY(sc, 1024); /* Added 12/7/00 */
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return status;
}
/*
* Entry point for flash ioclt.
*/
static int
flashcard(struct ifnet *ifp, struct aironet_ioctl *l_ioctl)
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
{
int z = 0, status;
struct an_softc *sc;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
sc = ifp->if_softc;
if (sc->mpi350) {
if_printf(ifp, "flashing not supported on MPI 350 yet\n");
return(-1);
}
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
status = l_ioctl->command;
switch (l_ioctl->command) {
case AIROFLSHRST:
return cmdreset(ifp);
break;
case AIROFLSHSTFL:
if (sc->an_flash_buffer) {
free(sc->an_flash_buffer, M_DEVBUF);
sc->an_flash_buffer = NULL;
}
sc->an_flash_buffer = malloc(FLASH_SIZE, M_DEVBUF, M_WAITOK);
if (sc->an_flash_buffer)
return setflashmode(ifp);
else
return ENOBUFS;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
break;
case AIROFLSHGCHR: /* Get char from aux */
AN_UNLOCK(sc);
status = copyin(l_ioctl->data, &sc->areq, l_ioctl->len);
AN_LOCK(sc);
if (status)
return status;
z = *(int *)&sc->areq;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if ((status = flashgchar(ifp, z, 8000)) == 1)
return 0;
else
return -1;
case AIROFLSHPCHR: /* Send char to card. */
AN_UNLOCK(sc);
status = copyin(l_ioctl->data, &sc->areq, l_ioctl->len);
AN_LOCK(sc);
if (status)
return status;
z = *(int *)&sc->areq;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if ((status = flashpchar(ifp, z, 8000)) == -1)
return -EIO;
else
return 0;
break;
case AIROFLPUTBUF: /* Send 32k to card */
if (l_ioctl->len > FLASH_SIZE) {
if_printf(ifp, "Buffer to big, %x %x\n",
l_ioctl->len, FLASH_SIZE);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -EINVAL;
}
AN_UNLOCK(sc);
status = copyin(l_ioctl->data, sc->an_flash_buffer, l_ioctl->len);
AN_LOCK(sc);
if (status)
return status;
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
if ((status = flashputbuf(ifp)) != 0)
return -EIO;
else
return 0;
break;
case AIRORESTART:
if ((status = flashrestart(ifp)) != 0) {
if_printf(ifp, "FLASHRESTART returned %d\n", status);
Fix bugs in the structure for rx_frame by making gap length one byte and a packed array so sizeof work. This broke RFMON mode and passing up 802.11 packets. The Linux emulation code was derived from the open source Linux driver to maintain compatibility. LEAP support is added, hints from Richard Johnson. I've verified this locally with PC350v42510.img firmware. More bug fixing from Marco to fix long passwords. Change DELAYs in flash part of driver to FLASH_DELAY which uses tsleep so it doesn't look like your system died during a flash update. Install header files in /usr/include/dev/an Cleanup some ifmedia bugs add "Home" key mode to ifmedia and ancontrol. This way you can manage 2 keys a little easier. Map the home mode into key 5. Enhance ifconfig to dump the various configured SSIDs. I use a bunch of different ones and roam between them. Use the syntax similar to the WEP keys to deal with setting difference SSIDs. Bump up up the Card capabilities RID since they added 2 bytes to it in the latest firmware. Thankfully we changed it from a terminal failure so the card still worked but the driver whined. Some cleanup patches from Marco Molteni. Submitted by: Richard Johnson <raj@cisco.com> Marco Molteni <molter@tin.it> and myself Various checks: David Wolfskill <david@catwhisker.org> Reviewed by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Approved by: Brooks Davis <brooks@freebsd.org> Warner Losh <imp@freebsd.org> Obtained from: Linux emulation API's from Aironet driver.
2001-12-31 22:01:44 +00:00
return -EIO;
} else
return 0;
break;
default:
return -EINVAL;
}
return -EINVAL;
}