1999-11-27 23:32:35 +00:00
|
|
|
/*
|
|
|
|
|
* Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010
|
|
|
|
|
* PCI-SCSI controllers.
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 1999 Gerard Roudier <groudier@club-internet.fr>
|
|
|
|
|
*
|
|
|
|
|
* This driver also supports the following Symbios/LSI PCI-SCSI chips:
|
|
|
|
|
* 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895.
|
|
|
|
|
*
|
|
|
|
|
* but does not support earlier chips as the following ones:
|
|
|
|
|
* 53C810, 53C815, 53C825.
|
|
|
|
|
*
|
|
|
|
|
* This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver.
|
|
|
|
|
* Copyright (C) 1998-1999 Gerard Roudier
|
|
|
|
|
*
|
|
|
|
|
* The sym53c8xx driver is derived from the ncr53c8xx driver that had been
|
|
|
|
|
* a port of the FreeBSD ncr driver to Linux-1.2.13.
|
|
|
|
|
*
|
|
|
|
|
* The original ncr driver has been written for 386bsd and FreeBSD by
|
|
|
|
|
* Wolfgang Stanglmeier <wolf@cologne.de>
|
|
|
|
|
* Stefan Esser <se@mi.Uni-Koeln.de>
|
|
|
|
|
* Copyright (C) 1994 Wolfgang Stanglmeier
|
|
|
|
|
*
|
|
|
|
|
* The initialisation code, and part of the code that addresses
|
|
|
|
|
* FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM
|
|
|
|
|
* written by Justin T. Gibbs.
|
|
|
|
|
*
|
|
|
|
|
* Other major contributions:
|
|
|
|
|
*
|
|
|
|
|
* NVRAM detection and reading.
|
|
|
|
|
* Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
|
|
|
|
|
*
|
|
|
|
|
*-----------------------------------------------------------------------------
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
|
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
2000-05-01 19:54:26 +00:00
|
|
|
*
|
|
|
|
|
* $FreeBSD$
|
1999-11-27 23:32:35 +00:00
|
|
|
*/
|
|
|
|
|
|
1999-11-27 23:35:46 +00:00
|
|
|
Status:
|
|
|
|
|
BETA-RELEASE
|
1999-11-27 23:32:35 +00:00
|
|
|
This driver is currently developped under the following O/S:
|
|
|
|
|
FreeBSD 4.0 SNAPSHOT July 5th 1999
|
1999-11-27 23:35:46 +00:00
|
|
|
FreeBSD 4.0 current October 1999
|
1999-11-27 23:32:35 +00:00
|
|
|
Starting with version 0.9.0, the driver contains conditionnal code
|
|
|
|
|
for using pre-4.0 BUS stuff for PCI. I have successfully tested driver
|
|
|
|
|
version 0.9.0 under:
|
|
|
|
|
FreeBSD 3.2 RELEASE
|
1999-11-27 23:35:46 +00:00
|
|
|
FreeBSD 3.3 RELEASE
|
1999-11-27 23:32:35 +00:00
|
|
|
|
|
|
|
|
Latest revision:
|
1999-11-28 01:35:29 +00:00
|
|
|
sym-0.12.0-19991127
|
1999-11-27 23:35:46 +00:00
|
|
|
Files to download:
|
|
|
|
|
SYM-0.9.0-19991024.tar.gz
|
1999-11-27 23:37:15 +00:00
|
|
|
PATCH-SYM-0.10.0-19991111.gz
|
|
|
|
|
PATCH-SYM-0.11.0-19991120.gz
|
1999-11-28 01:35:29 +00:00
|
|
|
PATCH-SYM-0.12.0-19991127.gz
|
1999-11-27 23:32:35 +00:00
|
|
|
|
|
|
|
|
Supported SCSI features:
|
|
|
|
|
- Initiator mode
|
|
|
|
|
- Wide 16 SCSI BUS
|
1999-11-28 01:35:29 +00:00
|
|
|
- FAST10 up to FAST80-DT synchronous data transfers
|
1999-11-27 23:32:35 +00:00
|
|
|
(depends on controller capabilities)
|
|
|
|
|
- 64 luns per target
|
|
|
|
|
- 256 tags per lun
|
1999-11-28 01:35:29 +00:00
|
|
|
- MDP (1)
|
1999-11-27 23:32:35 +00:00
|
|
|
- BUS DEVICE RESET message
|
1999-11-28 01:35:29 +00:00
|
|
|
- ABORT, ABORT TAG message
|
1999-11-27 23:32:35 +00:00
|
|
|
|
|
|
|
|
Supported generic chip features:
|
|
|
|
|
- On chip RAM
|
|
|
|
|
- PCI optimized transactions.
|
|
|
|
|
|
|
|
|
|
Supported features of 896/895A/1010:
|
|
|
|
|
- Full SCRIPTS in on-board RAM (8K)
|
|
|
|
|
- Phase mismatch handling from SCRIPTS.
|
|
|
|
|
|
|
|
|
|
Others:
|
|
|
|
|
- SYMBIOS NVRAM layout using 24c16 EEPROM
|
|
|
|
|
- TEKRAM NVRAM layout using 24c16 EEPROM (2)
|
|
|
|
|
- TEKRAM NVRAM layout using 93c46 EEPROM (2)
|
|
|
|
|
- Transfer residuals
|
|
|
|
|
- 0(1) for both SCRIPTS and C code, allowing
|
|
|
|
|
100% scalability.
|
|
|
|
|
|
|
|
|
|
Notes:
|
1999-11-28 01:35:29 +00:00
|
|
|
(1) Not yet reported. May not work as expected.
|
1999-11-27 23:32:35 +00:00
|
|
|
|
|
|
|
|
Files:
|
|
|
|
|
README.sym this file
|
|
|
|
|
sym_conf.h driver configuration
|
|
|
|
|
sym_defs.h driver definitions
|
|
|
|
|
sym_hipd.c driver code
|
|
|
|
|
sym_sys.patch kernel patch for FreeBSD 4
|
|
|
|
|
sym_sys_3.patch kernel patch for FreeBSD 3
|
|
|
|
|
|
|
|
|
|
These patches apply a change to the ncr.c driver that forces it to
|
|
|
|
|
ignore SYM53C8XX chips that support LOAD/STORE. These devices will
|
|
|
|
|
be attached by the sym_hipd.c driver.
|
|
|
|
|
|
|
|
|
|
Installation:
|
|
|
|
|
1) Untar SYM-0.9.0-19991024.tar.gz
|
1999-11-28 00:45:27 +00:00
|
|
|
2) Create the /usr/src/sys/dev/sym directory
|
1999-11-28 01:35:29 +00:00
|
|
|
3) Copy README.sym, sym_conf.h, sym_defs.h and sym_hipd.c to
|
1999-11-28 00:45:27 +00:00
|
|
|
/usr/src/sys/dev/sym/
|
1999-11-28 01:35:29 +00:00
|
|
|
4) Change to /usr/src/sys/ directory
|
|
|
|
|
5) If FreeBSD-4, apply the unified patch sym_sys.patch
|
1999-11-27 23:32:35 +00:00
|
|
|
(patch -p0 <sym_sys.patch)
|
|
|
|
|
Otherwise,
|
|
|
|
|
If FreeBSD-3, apply the unified patch sym_sys_3.patch
|
|
|
|
|
(patch -p0 <sym_sys_3.patch)
|
|
|
|
|
Otherwise, leave here. ;)
|
1999-11-28 01:35:29 +00:00
|
|
|
6) Change to /usr/src/sys/dev/sym directory
|
|
|
|
|
7) Update to SYM-0.11.0-19991120
|
1999-11-27 23:35:46 +00:00
|
|
|
gzip -d <PATCH-SYM-0.10.0-19991111.gz | patch -p0
|
1999-11-27 23:37:15 +00:00
|
|
|
gzip -d <PATCH-SYM-0.11.0-19991120.gz | patch -p0
|
1999-11-28 01:35:29 +00:00
|
|
|
gzip -d <PATCH-SYM-0.12.0-19991127.gz | patch -p0
|
|
|
|
|
8) Add sym0 to your kernel configuration as indicated in patched LINT file.
|
1999-11-27 23:32:35 +00:00
|
|
|
Configure and make your kernel.
|
|
|
|
|
|
1999-11-27 23:35:46 +00:00
|
|
|
As seen from the shell history file (driver material assumed from /tmp),
|
|
|
|
|
installation should proceed as follow (modulo mistakes from me:)):
|
|
|
|
|
|
|
|
|
|
cd /tmp
|
|
|
|
|
tar zxvf SYM-0.9.0-19991024.tar.gz
|
1999-11-28 00:45:27 +00:00
|
|
|
cp SYM-0.9.0-19991024/* /usr/src/sys/dev/sym
|
1999-11-27 23:35:46 +00:00
|
|
|
cd /usr/src/sys
|
1999-11-28 00:45:27 +00:00
|
|
|
patch -p0 <dev/sym/sym_sys.patch # use sym_sys_3.patch if FreeBSD-3.X
|
|
|
|
|
cd dev/sym
|
1999-11-27 23:35:46 +00:00
|
|
|
gzip -d </tmp/PATCH-SYM-0.10.0-19991111.gz | patch -p0
|
1999-11-27 23:37:15 +00:00
|
|
|
gzip -d </tmp/PATCH-SYM-0.11.0-19991120.gz | patch -p0
|
1999-11-28 01:35:29 +00:00
|
|
|
gzip -d </tmp/PATCH-SYM-0.12.0-19991127.gz | patch -p0
|
1999-11-27 23:35:46 +00:00
|
|
|
|
1999-11-28 01:35:29 +00:00
|
|
|
Configuring Ultra-3 DT data transfer support.
|
|
|
|
|
---------------------------------------------
|
|
|
|
|
If you have a board using the SYM53C1010 (only evaluation boards seem to
|
|
|
|
|
be available for now), you may want to give Ultra-3 DT transfer a try.
|
|
|
|
|
For the reasons that FreeBSD-CAM is not yet ready for Ultra-3 and that
|
|
|
|
|
early SYM53C1010 chips need some work-around for DT transfers to work
|
|
|
|
|
reliably, you must apply manually the following additionnal patch to your
|
|
|
|
|
kernel tree:
|
|
|
|
|
|
|
|
|
|
---------------------- Cut Here ------------------------
|
|
|
|
|
--- cam/scsi/scsi_all.c.00 1999/08/29 16:21:44
|
|
|
|
|
+++ cam/scsi/scsi_all.c 1999/11/23 22:11:22
|
|
|
|
|
@@ -2394,6 +2394,7 @@
|
|
|
|
|
u_int period_factor;
|
|
|
|
|
u_int period; /* in 10ths of ns */
|
|
|
|
|
} scsi_syncrates[] = {
|
|
|
|
|
+ { 0x09, 125 },
|
|
|
|
|
{ 0x0a, 250 },
|
|
|
|
|
{ 0x0b, 303 },
|
|
|
|
|
{ 0x0c, 500 }
|
|
|
|
|
--- pci/sym_conf.h.00 Fri Nov 26 22:58:59 1999
|
|
|
|
|
+++ pci/sym_conf.h Fri Nov 26 22:58:38 1999
|
|
|
|
|
@@ -69,6 +69,7 @@
|
|
|
|
|
* corresponding code will get useless.
|
|
|
|
|
*/
|
|
|
|
|
/* #define SYMCONF_BROKEN_U3EN_SUPPORT */
|
|
|
|
|
+#define SYMCONF_BROKEN_U3EN_SUPPORT
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Use Normal IO instead of MMIO.
|
|
|
|
|
---------------------- Cut Here ------------------------
|
|
|
|
|
|
|
|
|
|
This change consist in allowing sync factor 9 support to be handled
|
|
|
|
|
by scsi_all.c and a compilation option to be defined in sym_conf.h.
|
|
|
|
|
The driver may only start a PPR negotiation if sync factor is 9.
|
|
|
|
|
This change has been only tested on FreeBSD-3.3 for the moment.
|
|
|
|
|
|
|
|
|
|
For the PPR negotiation to occur at system startup time, you need to
|
|
|
|
|
configure Ultra3 hard disks in the NVRAM for 80 Mega-transfers per second
|
|
|
|
|
Wide.
|
|
|
|
|
If you prefer to use camcontrol for such a negotiation to be performed after
|
|
|
|
|
system startup, then you have to rebuild either the libcam shareable library
|
|
|
|
|
with the patched version of scsi_all.c, on to rebuild camcontrol using
|
|
|
|
|
the new static version of the libcam library that includes the patched
|
|
|
|
|
version of scsi_all.o.
|
1999-11-27 23:35:46 +00:00
|
|
|
|
1999-11-27 23:32:35 +00:00
|
|
|
Warnings:
|
|
|
|
|
- This driver uses LOAD/STORE instructions from SCRIPTS and therefore does
|
|
|
|
|
not support earliest NCR chips (NCR53C810, NCR53C815, NCR53C825).
|
|
|
|
|
|
|
|
|
|
Versionning:
|
|
|
|
|
- The version number consists in 3 numbers X.Y.Z, starting with 0.0.0.
|
|
|
|
|
- Z will not be used for incremental patches, but may be used for
|
|
|
|
|
quick fixes.
|
|
|
|
|
- Incremental diff files are of the following pattern:
|
|
|
|
|
PATCH-SYM-X.Y.Z-YYYYMMDD
|
1999-11-28 00:45:27 +00:00
|
|
|
They must be applied from directory: /usr/src/sys/dev/sym/
|
1999-11-27 23:35:46 +00:00
|
|
|
- Version 1.0.0 will happen when the driver will be tested enough but this
|
|
|
|
|
driver version will probably not officially support the C1010 (Ultra-3)
|
1999-11-28 01:35:29 +00:00
|
|
|
since the testing of Ultra3 has just started and FreeBSD-CAM is not yet
|
|
|
|
|
ready for the support of Ultra-3. Some 1.X.0 version will support
|
|
|
|
|
DT data transfer for the C1010.
|
1999-11-27 23:32:35 +00:00
|
|
|
- Version 2.0.0 is not planned for now, but will add support for host target
|
|
|
|
|
mode if it will ever exist.
|
|
|
|
|
|
|
|
|
|
Change log:
|
|
|
|
|
* SYM-0.0.0-19990915
|
|
|
|
|
Initial release.
|
|
|
|
|
|
|
|
|
|
* SYM-0.1.0-19990919 (diff file PATCH-SYM-0.1.0-19990919
|
|
|
|
|
Add NVRAM support for latest Tekram boards using 24c16 EEPROM.
|
|
|
|
|
|
|
|
|
|
* SYM-0.2.0-19990922 (diff file PATCH-SYM-0.2.0-19990922
|
|
|
|
|
Add PPR negotiation and Ultra3 DT transfers for the LSI53C1010.
|
|
|
|
|
This corresponding code is untested since I haven't yet the
|
|
|
|
|
hardware. But the driver is not broken for current chips.
|
|
|
|
|
|
|
|
|
|
* SYM-0.3.0-19990925 (diff file PATCH-SYM-0.3.0-19990925
|
|
|
|
|
Source review.
|
|
|
|
|
Testing of the QUEUE FULL handling (some fixes applied).
|
|
|
|
|
|
|
|
|
|
* SYM-0.4.0-19990925 (diff file PATCH-SYM-0.4.0-19990928)
|
|
|
|
|
Fixes, notably the QUEUE FULL handling that requeued everything
|
|
|
|
|
without telling the XPT about the error. Note that this did not
|
|
|
|
|
break anything, but the queue depth was never reduced.
|
|
|
|
|
|
|
|
|
|
* SYM-0.5.0-19991001 (diff file PATCH-SYM-0.5.0-19991001)
|
|
|
|
|
Problem of not discovering LUNs != 0 hopefully fixed.
|
|
|
|
|
Some other minor fixes.
|
|
|
|
|
|
|
|
|
|
* SYM-0.6.0-19991003 (diff file PATCH-SYM-0.6.0-19991003)
|
|
|
|
|
Test error recovery pathes and residual calculation.
|
|
|
|
|
Improve Symbios NVRAM support by applying the SCAN_LUNS flag. The driver
|
|
|
|
|
answers DEV_NOT_THERE to INQUIRYs for LUNs that are not to be scanned.
|
|
|
|
|
Switch the driver status for SPI2 support to BETA-RELEASE.
|
|
|
|
|
|
|
|
|
|
* SYM-0.7.0-19991006 (diff file PATCH-SYM-0.7.0-19991006)
|
|
|
|
|
Add support of the LSI1510D that emulates a 895 (infos sent by Compaq
|
|
|
|
|
that seems to be the only supplier of this chip)
|
|
|
|
|
Return CAM_REQ_ABORTED on HS_ABORT host status.
|
|
|
|
|
Fix a tiny bug that let the driver miss the TAG setting.
|
|
|
|
|
|
|
|
|
|
* SYM-0.8.0-19991016 (diff file PATCH-SYM-0.8.0-19991016)
|
|
|
|
|
Heavy rewrite/rewamping of the error handling code in order to conform
|
|
|
|
|
to FreeBSD-CAM expectation of commands having to be requeued and device
|
1999-11-27 23:35:46 +00:00
|
|
|
queue to be frozen on any kind of error. Driver status switched back
|
1999-11-27 23:32:35 +00:00
|
|
|
to EXPERIMENTAL due to these changes.
|
|
|
|
|
Warn user about targets that are not flagged for SCAN AT BOOT in the
|
|
|
|
|
NVRAM, since the driver will not allow the corresponding devices to be
|
|
|
|
|
discovered by XPT.
|
|
|
|
|
And numerous minor changes.
|
|
|
|
|
|
|
|
|
|
* SYM-0.9.0-19991024 (Tar file SYM-0.9.0-19991024.tar.gz)
|
|
|
|
|
Add support for previous PCI BUS stuff, for the driver to be useable
|
|
|
|
|
under FreeBSD 3.X RELEASES. The source is #ifdefed for using the old
|
|
|
|
|
PCI BUS code under __FreeBSD_version < 400000 and the new one otherwise.
|
|
|
|
|
Tested under RELENG_3_2_0_RELEASE, but should also be just fine for 3.3.
|
|
|
|
|
Other changes against version 0.8.0 are only minor buglet fixes.
|
|
|
|
|
|
1999-11-27 23:35:46 +00:00
|
|
|
* SYM-0.10.0-19991111 (diff file PATCH-SYM-0.10.0-19991111)
|
|
|
|
|
Add support for Alpha - UNTESTED. Consists in some minor changes picked
|
|
|
|
|
mostly from the ncr driver and some others as ahc_pci.c.
|
|
|
|
|
Fix the LED support through GPIO0 for pre-896 chips. In fact some code
|
|
|
|
|
was wrongly conditionned by something that was never met.
|
|
|
|
|
Switch driver status to BETA-RELEASE given that this driver has been rock
|
1999-11-28 01:35:29 +00:00
|
|
|
solid even if a small number of users seems to actually use it.
|
1999-11-27 23:35:46 +00:00
|
|
|
|
1999-11-27 23:37:15 +00:00
|
|
|
* SYM-0.11.0-19991120 (diff file PATCH-SYM-0.11.0-19991120)
|
|
|
|
|
Rearrange a bit the initialisation code that deals with IO registers.
|
|
|
|
|
Fix a bug in MODIFY_DP/IGN_RESIDUE handling (May-be this code will
|
|
|
|
|
never be used).
|
|
|
|
|
Fix a tiny problem in Wide nego. The driver didn't start the Sync nego
|
|
|
|
|
after a Wide nego if synchronous parameters weren't also changed.
|
|
|
|
|
Apply fixes that should allow to successfully link the kernel on Alpha.
|
|
|
|
|
LSI53C1010 tested with Asynchronous, FAST5, FAST10, FAST20 and FAST40
|
|
|
|
|
data transfers.
|
|
|
|
|
|
1999-11-28 01:35:29 +00:00
|
|
|
* SYM-0.12.0-19991127 (diff file PATCH-SYM-0.12.0-19991127)
|
|
|
|
|
Some testing in Ultra3 FAST-80 DT mode using a SYM53C1010 connected
|
|
|
|
|
to an ATLAS 4 Ultra3 disk. Required some tiny fix in the ppr nego code.
|
|
|
|
|
Some cosmetic changes in messages displayed under DEBUG.
|
|
|
|
|
Fix the chip table (and code) that made the driver wrongly attach
|
|
|
|
|
810 and 825 devices.
|
|
|
|
|
|
|
|
|
|
November 27 1999. "Gerard Roudier"<groudier@club-internet.fr>
|
