d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
67e73b2b2d
freebsd-nq/sys/dev/ipmi/ipmivars.h

258 lines
7.9 KiB
C
Raw Normal View History

Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
/*-
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#ifndef __IPMIVARS_H__
#define __IPMIVARS_H__
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
struct ipmi_get_info {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
int iface_type;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
uint64_t address;
int offset;
int io_mode;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
int irq;
};
struct ipmi_device;
struct ipmi_request {
TAILQ_ENTRY(ipmi_request) ir_link;
struct ipmi_device *ir_owner; /* Driver uses NULL. */
u_char *ir_request; /* Request is data to send to BMC. */
size_t ir_requestlen;
u_char *ir_reply; /* Reply is data read from BMC. */
size_t ir_replybuflen; /* Length of ir_reply[] buffer. */
int ir_replylen; /* Length of reply from BMC. */
int ir_error;
long ir_msgid;
uint8_t ir_addr;
uint8_t ir_command;
uint8_t ir_compcode;
};
#define MAX_RES 3
#define KCS_DATA 0
#define KCS_CTL_STS 1
#define SMIC_DATA 0
#define SMIC_CTL_STS 1
#define SMIC_FLAGS 2
struct ipmi_softc;
Remove hack attempt at using devfs cloning for per-file descriptor storage. Use the much simpler cdevpriv for per-fd state and enable it. This allows multiple opens of /dev/ipmi0 (e.g. using ipmitool while ipmievd is running in the background). MFC after: 1 week
2008-08-28 02:13:53 +00:00
/* Per file descriptor data. */
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct ipmi_device {
TAILQ_ENTRY(ipmi_device) ipmi_link;
TAILQ_HEAD(,ipmi_request) ipmi_completed_requests;
struct selinfo ipmi_select;
struct ipmi_softc *ipmi_softc;
int ipmi_closing;
int ipmi_requests;
u_char ipmi_address; /* IPMB address. */
u_char ipmi_lun;
};
struct ipmi_kcs {
};
struct ipmi_smic {
};
struct ipmi_ssif {
device_t smbus;
int smbus_address;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
};
struct ipmi_softc {
device_t ipmi_dev;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
union {
struct ipmi_kcs kcs;
struct ipmi_smic smic;
struct ipmi_ssif ssif;
} _iface;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
int ipmi_io_rid;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
int ipmi_io_type;
struct resource *ipmi_io_res[MAX_RES];
int ipmi_io_spacing;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
int ipmi_irq_rid;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct resource *ipmi_irq_res;
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
void *ipmi_irq;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
int ipmi_detaching;
Remove hack attempt at using devfs cloning for per-file descriptor storage. Use the much simpler cdevpriv for per-fd state and enable it. This allows multiple opens of /dev/ipmi0 (e.g. using ipmitool while ipmievd is running in the background). MFC after: 1 week
2008-08-28 02:13:53 +00:00
int ipmi_opened;
struct cdev *ipmi_cdev;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
TAILQ_HEAD(,ipmi_request) ipmi_pending_requests;
eventhandler_tag ipmi_watchdog_tag;
Don't try to stop the IPMI watchdog timer if it is not running. Starting or stopping the IPMI watchdog is rather expensive with the current implementation as all IPMI requests are bounced via thread. This is not viable during shutdown or dumps, and this avoids headache in the common case that the watchdog is not enabled. The IPMI watchdog should probably be reworked to not use a separate thread to fix this in the case when the watchdog timer is enabled. MFC after: 2 weeks
2012-08-07 12:40:31 +00:00
int ipmi_watchdog_active;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
struct intr_config_hook ipmi_ich;
struct mtx ipmi_lock;
struct cv ipmi_request_added;
struct proc *ipmi_kthread;
driver_intr_t *ipmi_intr;
int (*ipmi_startup)(struct ipmi_softc *);
int (*ipmi_enqueue_request)(struct ipmi_softc *, struct ipmi_request *);
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
};
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#define ipmi_ssif_smbus_address _iface.ssif.smbus_address
#define ipmi_ssif_smbus _iface.ssif.smbus
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
struct ipmi_ipmb {
u_char foo;
};
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#define KCS_MODE 0x01
#define SMIC_MODE 0x02
#define BT_MODE 0x03
#define SSIF_MODE 0x04
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
/* KCS status flags */
#define KCS_STATUS_OBF 0x01 /* Data Out ready from BMC */
#define KCS_STATUS_IBF 0x02 /* Data In from System */
#define KCS_STATUS_SMS_ATN 0x04 /* Ready in RX queue */
#define KCS_STATUS_C_D 0x08 /* Command/Data register write*/
#define KCS_STATUS_OEM1 0x10
#define KCS_STATUS_OEM2 0x20
#define KCS_STATUS_S0 0x40
#define KCS_STATUS_S1 0x80
#define KCS_STATUS_STATE(x) ((x)>>6)
#define KCS_STATUS_STATE_IDLE 0x0
#define KCS_STATUS_STATE_READ 0x1
#define KCS_STATUS_STATE_WRITE 0x2
#define KCS_STATUS_STATE_ERROR 0x3
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#define KCS_IFACE_STATUS_OK 0x00
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
#define KCS_IFACE_STATUS_ABORT 0x01
#define KCS_IFACE_STATUS_ILLEGAL 0x02
#define KCS_IFACE_STATUS_LENGTH_ERR 0x06
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#define KCS_IFACE_STATUS_UNKNOWN_ERR 0xff
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* KCS control codes */
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
#define KCS_CONTROL_GET_STATUS_ABORT 0x60
#define KCS_CONTROL_WRITE_START 0x61
#define KCS_CONTROL_WRITE_END 0x62
#define KCS_DATA_IN_READ 0x68
/* SMIC status flags */
#define SMIC_STATUS_BUSY 0x01 /* System set and BMC clears it */
#define SMIC_STATUS_SMS_ATN 0x04 /* BMC has a message */
#define SMIC_STATUS_EVT_ATN 0x08 /* Event has been RX */
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#define SMIC_STATUS_SMI 0x10 /* asserted SMI */
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
#define SMIC_STATUS_TX_RDY 0x40 /* Ready to accept WRITE */
#define SMIC_STATUS_RX_RDY 0x80 /* Ready to read */
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#define SMIC_STATUS_RESERVED 0x22
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
/* SMIC control codes */
#define SMIC_CC_SMS_GET_STATUS 0x40
#define SMIC_CC_SMS_WR_START 0x41
#define SMIC_CC_SMS_WR_NEXT 0x42
#define SMIC_CC_SMS_WR_END 0x43
#define SMIC_CC_SMS_RD_START 0x44
#define SMIC_CC_SMS_RD_NEXT 0x45
#define SMIC_CC_SMS_RD_END 0x46
/* SMIC status codes */
#define SMIC_SC_SMS_RDY 0xc0
#define SMIC_SC_SMS_WR_START 0xc1
#define SMIC_SC_SMS_WR_NEXT 0xc2
#define SMIC_SC_SMS_WR_END 0xc3
#define SMIC_SC_SMS_RD_START 0xc4
#define SMIC_SC_SMS_RD_NEXT 0xc5
#define SMIC_SC_SMS_RD_END 0xc6
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#define IPMI_ADDR(netfn, lun) ((netfn) << 2 | (lun))
#define IPMI_REPLY_ADDR(addr) ((addr) + 0x4)
#define IPMI_LOCK(sc) mtx_lock(&(sc)->ipmi_lock)
#define IPMI_UNLOCK(sc) mtx_unlock(&(sc)->ipmi_lock)
#define IPMI_LOCK_ASSERT(sc) mtx_assert(&(sc)->ipmi_lock, MA_OWNED)
#define ipmi_alloc_driver_request(addr, cmd, reqlen, replylen) \
ipmi_alloc_request(NULL, 0, (addr), (cmd), (reqlen), (replylen))
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#if __FreeBSD_version < 601105
#define bus_read_1(r, o) \
bus_space_read_1(rman_get_bustag(r), rman_get_bushandle(r), (o))
#define bus_write_1(r, o, v) \
bus_space_write_1(rman_get_bustag(r), rman_get_bushandle(r), (o), (v))
#endif
/* I/O to a single I/O resource. */
#define INB_SINGLE(sc, x) \
bus_read_1((sc)->ipmi_io_res[0], (sc)->ipmi_io_spacing * (x))
#define OUTB_SINGLE(sc, x, value) \
bus_write_1((sc)->ipmi_io_res[0], (sc)->ipmi_io_spacing * (x), value)
/* I/O with each register in its in I/O resource. */
#define INB_MULTIPLE(sc, x) \
bus_read_1((sc)->ipmi_io_res[(x)], 0)
#define OUTB_MULTIPLE(sc, x, value) \
bus_write_1((sc)->ipmi_io_res[(x)], 0, value)
/*
* Determine I/O method based on whether or not we have more than one I/O
* resource.
*/
#define INB(sc, x) \
((sc)->ipmi_io_res[1] != NULL ? INB_MULTIPLE(sc, x) : INB_SINGLE(sc, x))
#define OUTB(sc, x, value) \
((sc)->ipmi_io_res[1] != NULL ? OUTB_MULTIPLE(sc, x, value) : \
OUTB_SINGLE(sc, x, value))
empirical testing showed that 3 seconds is just too slow for GET_DEVICE_ID to return on newer Dell hardware. Bump to 6 second timeouts until someone has a better idea on how to handle this Reviewed by: jhb@ MFC after: 2 weeks Sponsored by: Yahoo! Inc.
2013-07-30 18:44:29 +00:00
#define MAX_TIMEOUT 6 * hz
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
int ipmi_attach(device_t);
int ipmi_detach(device_t);
void ipmi_release_resources(device_t);
/* Manage requests. */
struct ipmi_request *ipmi_alloc_request(struct ipmi_device *, long, uint8_t,
uint8_t, size_t, size_t);
void ipmi_complete_request(struct ipmi_softc *, struct ipmi_request *);
struct ipmi_request *ipmi_dequeue_request(struct ipmi_softc *);
void ipmi_free_request(struct ipmi_request *);
int ipmi_polled_enqueue_request(struct ipmi_softc *, struct ipmi_request *);
int ipmi_submit_driver_request(struct ipmi_softc *, struct ipmi_request *,
int);
/* Identify BMC interface via SMBIOS. */
int ipmi_smbios_identify(struct ipmi_get_info *);
/* Match BMC PCI device listed in SMBIOS. */
const char *ipmi_pci_match(uint16_t, uint16_t);
/* Interface attach routines. */
int ipmi_kcs_attach(struct ipmi_softc *);
int ipmi_kcs_probe_align(struct ipmi_softc *);
int ipmi_smic_attach(struct ipmi_softc *);
int ipmi_ssif_attach(struct ipmi_softc *, device_t, int);
#ifdef IPMB
int ipmi_handle_attn(struct ipmi_softc *);
#endif
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux
2006-02-10 20:51:35 +00:00
extern devclass_t ipmi_devclass;
extern int ipmi_attached;
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
#endif /* !__IPMIVARS_H__ */
Reference in New Issue Copy Permalink