244 lines
8.6 KiB
C
244 lines
8.6 KiB
C
|
/* $NetBSD: maltareg.h,v 1.1 2002/03/07 14:44:04 simonb Exp $ */
|
||
|
|
||
|
/*
|
||
|
* Copyright 2002 Wasabi Systems, Inc.
|
||
|
* All rights reserved.
|
||
|
*
|
||
|
* Written by Simon Burge for Wasabi Systems, Inc.
|
||
|
*
|
||
|
* Redistribution and use in source and binary forms, with or without
|
||
|
* modification, are permitted provided that the following conditions
|
||
|
* are met:
|
||
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer.
|
||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer in the
|
||
|
* documentation and/or other materials provided with the distribution.
|
||
|
* 3. All advertising materials mentioning features or use of this software
|
||
|
* must display the following acknowledgement:
|
||
|
* This product includes software developed for the NetBSD Project by
|
||
|
* Wasabi Systems, Inc.
|
||
|
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
|
||
|
* or promote products derived from this software without specific prior
|
||
|
* written permission.
|
||
|
*
|
||
|
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
|
||
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
||
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
|
||
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||
|
*
|
||
|
* $FreeBSD$
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
Memory Map
|
||
|
|
||
|
0000.0000 * 128MB Typically SDRAM (on Core Board)
|
||
|
0800.0000 * 256MB Typically PCI
|
||
|
1800.0000 * 62MB Typically PCI
|
||
|
1be0.0000 * 2MB Typically System controller's internal registers
|
||
|
1c00.0000 * 32MB Typically not used
|
||
|
1e00.0000 4MB Monitor Flash
|
||
|
1e40.0000 12MB reserved
|
||
|
1f00.0000 12MB Switches
|
||
|
LEDs
|
||
|
ASCII display
|
||
|
Soft reset
|
||
|
FPGA revision number
|
||
|
CBUS UART (tty2)
|
||
|
General Purpose I/O
|
||
|
I2C controller
|
||
|
1f10.0000 * 11MB Typically System Controller specific
|
||
|
1fc0.0000 4MB Maps to Monitor Flash
|
||
|
1fd0.0000 * 3MB Typically System Controller specific
|
||
|
|
||
|
* depends on implementation of the Core Board and of software
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
CPU interrupts
|
||
|
|
||
|
NMI South Bridge or NMI button
|
||
|
0 South Bridge INTR
|
||
|
1 South Bridge SMI
|
||
|
2 CBUS UART (tty2)
|
||
|
3 COREHI (Core Card)
|
||
|
4 CORELO (Core Card)
|
||
|
5 Not used, driven inactive (typically CPU internal timer interrupt
|
||
|
|
||
|
IRQ mapping (as used by YAMON)
|
||
|
|
||
|
0 Timer South Bridge
|
||
|
1 Keyboard SuperIO
|
||
|
2 Reserved by South Bridge (for cascading)
|
||
|
3 UART (tty1) SuperIO
|
||
|
4 UART (tty0) SuperIO
|
||
|
5 Not used
|
||
|
6 Floppy Disk SuperIO
|
||
|
7 Parallel Port SuperIO
|
||
|
8 Real Time Clock South Bridge
|
||
|
9 I2C bus South Bridge
|
||
|
10 PCI A,B,eth PCI slot 1..4, Ethernet
|
||
|
11 PCI C,audio PCI slot 1..4, Audio, USB (South Bridge)
|
||
|
PCI D,USB
|
||
|
12 Mouse SuperIO
|
||
|
13 Reserved by South Bridge
|
||
|
14 Primary IDE Primary IDE slot
|
||
|
15 Secondary IDE Secondary IDE slot/Compact flash connector
|
||
|
*/
|
||
|
|
||
|
#define MALTA_SYSTEMRAM_BASE 0x00000000 /* System RAM: */
|
||
|
#define MALTA_SYSTEMRAM_SIZE 0x08000000 /* 128 MByte */
|
||
|
|
||
|
#define MALTA_PCIMEM1_BASE 0x08000000 /* PCI 1 memory: */
|
||
|
#define MALTA_PCIMEM1_SIZE 0x08000000 /* 128 MByte */
|
||
|
|
||
|
#define MALTA_PCIMEM2_BASE 0x10000000 /* PCI 2 memory: */
|
||
|
#define MALTA_PCIMEM2_SIZE 0x08000000 /* 128 MByte */
|
||
|
|
||
|
#define MALTA_PCIMEM3_BASE 0x18000000 /* PCI 3 memory */
|
||
|
#define MALTA_PCIMEM3_SIZE 0x03e00000 /* 62 MByte */
|
||
|
|
||
|
#define MALTA_CORECTRL_BASE 0x1be00000 /* Core control: */
|
||
|
#define MALTA_CORECTRL_SIZE 0x00200000 /* 2 MByte */
|
||
|
|
||
|
#define MALTA_RESERVED_BASE1 0x1c000000 /* Reserved: */
|
||
|
#define MALTA_RESERVED_SIZE1 0x02000000 /* 32 MByte */
|
||
|
|
||
|
#define MALTA_MONITORFLASH_BASE 0x1e000000 /* Monitor Flash: */
|
||
|
#define MALTA_MONITORFLASH_SIZE 0x003e0000 /* 4 MByte */
|
||
|
#define MALTA_MONITORFLASH_SECTORSIZE 0x00010000 /* Sect. = 64 KB */
|
||
|
|
||
|
#define MALTA_FILEFLASH_BASE 0x1e3e0000 /* File Flash (for monitor): */
|
||
|
#define MALTA_FILEFLASH_SIZE 0x00020000 /* 128 KByte */
|
||
|
|
||
|
#define MALTA_FILEFLASH_SECTORSIZE 0x00010000 /* Sect. = 64 KB */
|
||
|
|
||
|
#define MALTA_RESERVED_BASE2 0x1e400000 /* Reserved: */
|
||
|
#define MALTA_RESERVED_SIZE2 0x00c00000 /* 12 MByte */
|
||
|
|
||
|
#define MALTA_FPGA_BASE 0x1f000000 /* FPGA: */
|
||
|
#define MALTA_FPGA_SIZE 0x00c00000 /* 12 MByte */
|
||
|
|
||
|
#define MALTA_NMISTATUS (MALTA_FPGA_BASE + 0x24)
|
||
|
#define MALTA_NMI_SB 0x2 /* Pending NMI from the South Bridge */
|
||
|
#define MALTA_NMI_ONNMI 0x1 /* Pending NMI from the ON/NMI push button */
|
||
|
|
||
|
#define MALTA_NMIACK (MALTA_FPGA_BASE + 0x104)
|
||
|
#define MALTA_NMIACK_ONNMI 0x1 /* Write 1 to acknowledge ON/NMI */
|
||
|
|
||
|
#define MALTA_SWITCH (MALTA_FPGA_BASE + 0x200)
|
||
|
#define MALTA_SWITCH_MASK 0xff /* settings of DIP switch S2 */
|
||
|
|
||
|
#define MALTA_STATUS (MALTA_FPGA_BASE + 0x208)
|
||
|
#define MALTA_ST_MFWR 0x10 /* Monitor Flash is write protected (JP1) */
|
||
|
#define MALTA_S54 0x08 /* switch S5-4 - set YAMON factory default mode */
|
||
|
#define MALTA_S53 0x04 /* switch S5-3 */
|
||
|
#define MALTA_BIGEND 0x02 /* switch S5-2 - big endian mode */
|
||
|
|
||
|
#define MALTA_JMPRS (MALTA_FPGA_BASE + 0x210)
|
||
|
#define MALTA_JMPRS_PCICLK 0x1c /* PCI clock frequency */
|
||
|
#define MALTA_JMPRS_EELOCK 0x02 /* I2C EEPROM is write protected */
|
||
|
|
||
|
#define MALTA_LEDBAR (MALTA_FPGA_BASE + 0x408)
|
||
|
#define MALTA_ASCIIWORD (MALTA_FPGA_BASE + 0x410)
|
||
|
#define MALTA_ASCII_BASE (MALTA_FPGA_BASE + 0x418)
|
||
|
#define MALTA_ASCIIPOS0 0x00
|
||
|
#define MALTA_ASCIIPOS1 0x08
|
||
|
#define MALTA_ASCIIPOS2 0x10
|
||
|
#define MALTA_ASCIIPOS3 0x18
|
||
|
#define MALTA_ASCIIPOS4 0x20
|
||
|
#define MALTA_ASCIIPOS5 0x28
|
||
|
#define MALTA_ASCIIPOS6 0x30
|
||
|
#define MALTA_ASCIIPOS7 0x38
|
||
|
|
||
|
#define MALTA_SOFTRES (MALTA_FPGA_BASE + 0x500)
|
||
|
#define MALTA_GORESET 0x42 /* write this to MALTA_SOFTRES for board reset */
|
||
|
|
||
|
/*
|
||
|
* BRKRES is the number of milliseconds before a "break" on tty will
|
||
|
* trigger a reset. A value of 0 will disable the reset.
|
||
|
*/
|
||
|
#define MALTA_BRKRES (MALTA_FPGA_BASE + 0x508)
|
||
|
#define MALTA_BRKRES_MASK 0xff
|
||
|
|
||
|
#define MALTA_CBUSUART (MALTA_FPGA_BASE + 0x900)
|
||
|
/* 16C550C UART, 8 bit registers on 8 byte boundaries */
|
||
|
/* RXTX 0x00 */
|
||
|
/* INTEN 0x08 */
|
||
|
/* IIFIFO 0x10 */
|
||
|
/* LCTRL 0x18 */
|
||
|
/* MCTRL 0x20 */
|
||
|
/* LSTAT 0x28 */
|
||
|
/* MSTAT 0x30 */
|
||
|
/* SCRATCH 0x38 */
|
||
|
#define MALTA_CBUSUART_INTR 2
|
||
|
|
||
|
#define MALTA_GPIO_BASE (MALTA_FPGA_BASE + 0xa00)
|
||
|
#define MALTA_GPOUT 0x0
|
||
|
#define MALTA_GPINP 0x8
|
||
|
|
||
|
#define MALTA_I2C_BASE (MALTA_FPGA_BASE + 0xb00)
|
||
|
#define MALTA_I2CINP 0x00
|
||
|
#define MALTA_I2COE 0x08
|
||
|
#define MALTA_I2COUT 0x10
|
||
|
#define MALTA_I2CSEL 0x18
|
||
|
|
||
|
#define MALTA_BOOTROM_BASE 0x1fc00000 /* Boot ROM: */
|
||
|
#define MALTA_BOOTROM_SIZE 0x00400000 /* 4 MByte */
|
||
|
|
||
|
#define MALTA_REVISION 0x1fc00010
|
||
|
#define MALTA_REV_FPGRV 0xff0000 /* CBUS FPGA revision */
|
||
|
#define MALTA_REV_CORID 0x00fc00 /* Core Board ID */
|
||
|
#define MALTA_REV_CORRV 0x000300 /* Core Board Revision */
|
||
|
#define MALTA_REV_PROID 0x0000f0 /* Product ID */
|
||
|
#define MALTA_REV_PRORV 0x00000f /* Product Revision */
|
||
|
|
||
|
/* PCI definitions */
|
||
|
#define MALTA_SOUTHBRIDGE_INTR 0
|
||
|
|
||
|
#define MALTA_PCI0_IO_BASE MALTA_PCIMEM3_BASE
|
||
|
#define MALTA_PCI0_ADDR( addr ) (MALTA_PCI0_IO_BASE + (addr))
|
||
|
|
||
|
#define MALTA_RTCADR 0x70 // MALTA_PCI_IO_ADDR8(0x70)
|
||
|
#define MALTA_RTCDAT 0x71 // MALTA_PCI_IO_ADDR8(0x71)
|
||
|
|
||
|
#define MALTA_SMSC_COM1_ADR 0x3f8
|
||
|
#define MALTA_SMSC_COM2_ADR 0x2f8
|
||
|
#define MALTA_UART0ADR MALTA_PCI0_ADDR(MALTA_SMSC_COM1_ADR)
|
||
|
#define MALTA_UART1ADR MALTA_SMSC_COM2_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_COM2_ADR)
|
||
|
|
||
|
#define MALTA_SMSC_1284_ADR 0x378
|
||
|
#define MALTA_1284ADR MALTA_SMSC_1284_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_1284_ADR)
|
||
|
|
||
|
#define MALTA_SMSC_FDD_ADR 0x3f0
|
||
|
#define MALTA_FDDADR MALTA_SMSC_FDD_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_FDD_ADR)
|
||
|
|
||
|
#define MALTA_SMSC_KYBD_ADR 0x60 /* Fixed 0x60, 0x64 */
|
||
|
#define MALTA_KYBDADR MALTA_SMSC_KYBD_ADR // MALTA_PCI0_ADDR(MALTA_SMSC_KYBD_ADR)
|
||
|
#define MALTA_SMSC_MOUSE_ADR MALTA_SMSC_KYBD_ADR
|
||
|
#define MALTA_MOUSEADR MALTA_KYBDADR
|
||
|
|
||
|
|
||
|
#define MALTA_DMA_PCI_PCIBASE 0x00000000UL
|
||
|
#define MALTA_DMA_PCI_PHYSBASE 0x00000000UL
|
||
|
#define MALTA_DMA_PCI_SIZE (256 * 1024 * 1024)
|
||
|
|
||
|
#define MALTA_DMA_ISA_PCIBASE 0x00800000UL
|
||
|
#define MALTA_DMA_ISA_PHYSBASE 0x00000000UL
|
||
|
#define MALTA_DMA_ISA_SIZE (8 * 1024 * 1024)
|
||
|
|
||
|
#ifndef _LOCORE
|
||
|
void led_bar(uint8_t);
|
||
|
void led_display_word(uint32_t);
|
||
|
void led_display_str(const char *);
|
||
|
void led_display_char(int, uint8_t);
|
||
|
#endif
|