freebsd-nq/sys/dev/atkbdc/atkbdc_subr.c

130 lines
3.5 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
*
* from: FreeBSD: src/sys/isa/atkbdc_isa.c,v 1.31 2005/05/29 04:42:28 nyan Exp
*/
2003-06-11 00:34:37 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_kbd.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
2004-05-30 20:27:19 +00:00
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <machine/resource.h>
#include <sys/rman.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
#include <dev/atkbdc/atkbdc_subr.h>
#include <dev/atkbdc/atkbdcreg.h>
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
MALLOC_DEFINE(M_ATKBDDEV, "atkbddev", "AT Keyboard device");
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
devclass_t atkbdc_devclass;
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
int
atkbdc_print_child(device_t bus, device_t dev)
{
atkbdc_device_t *kbdcdev;
rman_res_t irq;
int flags;
int retval = 0;
kbdcdev = (atkbdc_device_t *)device_get_ivars(dev);
retval += bus_print_child_header(bus, dev);
flags = device_get_flags(dev);
if (flags != 0)
retval += printf(" flags 0x%x", flags);
irq = bus_get_resource_start(dev, SYS_RES_IRQ, kbdcdev->rid);
if (irq != 0)
Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. On some architectures, u_long isn't large enough for resource definitions. Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but type `long' is only 32-bit. This extends rman's resources to uintmax_t. With this change, any resource can feasibly be placed anywhere in physical memory (within the constraints of the driver). Why uintmax_t and not something machine dependent, or uint64_t? Though it's possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on 32-bit architectures. 64-bit architectures should have plenty of RAM to absorb the increase on resource sizes if and when this occurs, and the number of resources on memory-constrained systems should be sufficiently small as to not pose a drastic overhead. That being said, uintmax_t was chosen for source clarity. If it's specified as uint64_t, all printf()-like calls would either need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t aren't horrible, but it would also bake into the API for resource_list_print_type() either a hidden assumption that entries get cast to uintmax_t for printing, or these calls would need the PRI*64 macros. Since source code is meant to be read more often than written, I chose the clearest path of simply using uintmax_t. Tested on a PowerPC p5020-based board, which places all device resources in 0xfxxxxxxxx, and has 8GB RAM. Regression tested on qemu-system-i386 Regression tested on qemu-system-mips (malta profile) Tested PAE and devinfo on virtualbox (live CD) Special thanks to bz for his testing on ARM. Reviewed By: bz, jhb (previous) Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
retval += printf(" irq %jd", irq);
retval += bus_print_child_footer(bus, dev);
return (retval);
}
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
int
atkbdc_read_ivar(device_t bus, device_t dev, int index, uintptr_t *val)
{
atkbdc_device_t *ivar;
ivar = (atkbdc_device_t *)device_get_ivars(dev);
switch (index) {
2000-03-19 04:37:18 +00:00
case KBDC_IVAR_VENDORID:
*val = (u_long)ivar->vendorid;
break;
case KBDC_IVAR_SERIAL:
*val = (u_long)ivar->serial;
break;
case KBDC_IVAR_LOGICALID:
*val = (u_long)ivar->logicalid;
break;
case KBDC_IVAR_COMPATID:
*val = (u_long)ivar->compatid;
break;
default:
return ENOENT;
}
return 0;
}
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
int
atkbdc_write_ivar(device_t bus, device_t dev, int index, uintptr_t val)
{
atkbdc_device_t *ivar;
ivar = (atkbdc_device_t *)device_get_ivars(dev);
switch (index) {
2000-03-19 04:37:18 +00:00
case KBDC_IVAR_VENDORID:
ivar->vendorid = (u_int32_t)val;
break;
case KBDC_IVAR_SERIAL:
ivar->serial = (u_int32_t)val;
break;
case KBDC_IVAR_LOGICALID:
ivar->logicalid = (u_int32_t)val;
break;
case KBDC_IVAR_COMPATID:
ivar->compatid = (u_int32_t)val;
break;
default:
return ENOENT;
}
return 0;
}
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
struct resource_list
*atkbdc_get_resource_list(device_t bus, device_t dev)
{
atkbdc_device_t *ivar;
ivar = (atkbdc_device_t *)device_get_ivars(dev);
return &ivar->resources;
}