freebsd-nq/module/zfs/space_reftree.c

154 lines
4.2 KiB
C
Raw Normal View History

Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2009 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/*
* Copyright (c) 2013, 2015 by Delphix. All rights reserved.
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*/
#include <sys/zfs_context.h>
#include <sys/range_tree.h>
#include <sys/space_reftree.h>
/*
* Space reference trees.
*
* A range tree is a collection of integers. Every integer is either
* in the tree, or it's not. A space reference tree generalizes
* the idea: it allows its members to have arbitrary reference counts,
* as opposed to the implicit reference count of 0 or 1 in a range tree.
* This representation comes in handy when computing the union or
* intersection of multiple space maps. For example, the union of
* N range trees is the subset of the reference tree with refcnt >= 1.
* The intersection of N range trees is the subset with refcnt >= N.
*
* [It's very much like a Fourier transform. Unions and intersections
* are hard to perform in the 'range tree domain', so we convert the trees
* into the 'reference count domain', where it's trivial, then invert.]
*
* vdev_dtl_reassess() uses computations of this form to determine
* DTL_MISSING and DTL_OUTAGE for interior vdevs -- e.g. a RAID-Z vdev
* has an outage wherever refcnt >= vdev_nparity + 1, and a mirror vdev
* has an outage wherever refcnt >= vdev_children.
*/
static int
space_reftree_compare(const void *x1, const void *x2)
{
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
const space_ref_t *sr1 = (const space_ref_t *)x1;
const space_ref_t *sr2 = (const space_ref_t *)x2;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
int cmp = AVL_CMP(sr1->sr_offset, sr2->sr_offset);
if (likely(cmp))
return (cmp);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
return (AVL_PCMP(sr1, sr2));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
void
space_reftree_create(avl_tree_t *t)
{
avl_create(t, space_reftree_compare,
sizeof (space_ref_t), offsetof(space_ref_t, sr_node));
}
void
space_reftree_destroy(avl_tree_t *t)
{
space_ref_t *sr;
void *cookie = NULL;
while ((sr = avl_destroy_nodes(t, &cookie)) != NULL)
kmem_free(sr, sizeof (*sr));
avl_destroy(t);
}
static void
space_reftree_add_node(avl_tree_t *t, uint64_t offset, int64_t refcnt)
{
space_ref_t *sr;
sr = kmem_alloc(sizeof (*sr), KM_SLEEP);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
sr->sr_offset = offset;
sr->sr_refcnt = refcnt;
avl_add(t, sr);
}
void
space_reftree_add_seg(avl_tree_t *t, uint64_t start, uint64_t end,
int64_t refcnt)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
{
space_reftree_add_node(t, start, refcnt);
space_reftree_add_node(t, end, -refcnt);
}
/*
* Convert (or add) a range tree into a reference tree.
*/
void
space_reftree_add_map(avl_tree_t *t, range_tree_t *rt, int64_t refcnt)
{
range_seg_t *rs;
ASSERT(MUTEX_HELD(rt->rt_lock));
for (rs = avl_first(&rt->rt_root); rs; rs = AVL_NEXT(&rt->rt_root, rs))
space_reftree_add_seg(t, rs->rs_start, rs->rs_end, refcnt);
}
/*
* Convert a reference tree into a range tree. The range tree will contain
* all members of the reference tree for which refcnt >= minref.
*/
void
space_reftree_generate_map(avl_tree_t *t, range_tree_t *rt, int64_t minref)
{
uint64_t start = -1ULL;
int64_t refcnt = 0;
space_ref_t *sr;
ASSERT(MUTEX_HELD(rt->rt_lock));
range_tree_vacate(rt, NULL, NULL);
for (sr = avl_first(t); sr != NULL; sr = AVL_NEXT(t, sr)) {
refcnt += sr->sr_refcnt;
if (refcnt >= minref) {
if (start == -1ULL) {
start = sr->sr_offset;
}
} else {
if (start != -1ULL) {
uint64_t end = sr->sr_offset;
ASSERT(start <= end);
if (end > start)
range_tree_add(rt, start, end - start);
start = -1ULL;
}
}
}
ASSERT(refcnt == 0);
ASSERT(start == -1ULL);
}