freebsd-nq/sys/netinet6/raw_ip6.c

877 lines
22 KiB
C
Raw Normal View History

/*-
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)raw_ip.c 8.2 (Berkeley) 1/4/94
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ipsec.h"
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/errno.h>
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
#include <sys/jail.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/signalvar.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sx.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/route.h>
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_systm.h>
#include <netinet/in_pcb.h>
#include <netinet/icmp6.h>
#include <netinet/ip6.h>
#include <netinet6/ip6protosw.h>
#include <netinet6/ip6_mroute.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/ip6_var.h>
#include <netinet6/nd6.h>
#include <netinet6/raw_ip6.h>
#include <netinet6/scope6_var.h>
#ifdef IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#endif /* IPSEC */
#include <machine/stdarg.h>
#define satosin6(sa) ((struct sockaddr_in6 *)(sa))
#define ifatoia6(ifa) ((struct in6_ifaddr *)(ifa))
/*
* Raw interface to IP6 protocol.
*/
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(struct inpcbhead, ripcb);
VNET_DECLARE(struct inpcbinfo, ripcbinfo);
#define V_ripcb VNET(ripcb)
#define V_ripcbinfo VNET(ripcbinfo)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DEFINE(struct rip6stat, rip6stat);
extern u_long rip_sendspace;
extern u_long rip_recvspace;
/*
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
* Hooks for multicast routing. They all default to NULL, so leave them not
* initialized and rely on BSS being set to 0.
*/
/*
* The socket used to communicate with the multicast routing daemon.
*/
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DEFINE(struct socket *, ip6_mrouter);
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
/*
* The various mrouter functions.
*/
int (*ip6_mrouter_set)(struct socket *, struct sockopt *);
int (*ip6_mrouter_get)(struct socket *, struct sockopt *);
int (*ip6_mrouter_done)(void);
int (*ip6_mforward)(struct ip6_hdr *, struct ifnet *, struct mbuf *);
int (*mrt6_ioctl)(u_long, caddr_t);
/*
* Setup generic address and protocol structures for raw_input routine, then
* pass them along with mbuf chain.
*/
int
rip6_input(struct mbuf **mp, int *offp, int proto)
{
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
struct ifnet *ifp;
struct mbuf *m = *mp;
register struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
register struct inpcb *in6p;
struct inpcb *last = 0;
struct mbuf *opts = NULL;
2003-11-02 19:09:29 +00:00
struct sockaddr_in6 fromsa;
V_rip6stat.rip6s_ipackets++;
if (faithprefix_p != NULL && (*faithprefix_p)(&ip6->ip6_dst)) {
/* XXX Send icmp6 host/port unreach? */
m_freem(m);
return (IPPROTO_DONE);
}
2003-11-02 19:09:29 +00:00
init_sin6(&fromsa, m); /* general init */
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
ifp = m->m_pkthdr.rcvif;
INP_INFO_RLOCK(&V_ripcbinfo);
LIST_FOREACH(in6p, &V_ripcb, inp_list) {
MFp4: Bring in updated jail support from bz_jail branch. This enhances the current jail implementation to permit multiple addresses per jail. In addtion to IPv4, IPv6 is supported as well. Due to updated checks it is even possible to have jails without an IP address at all, which basically gives one a chroot with restricted process view, no networking,.. SCTP support was updated and supports IPv6 in jails as well. Cpuset support permits jails to be bound to specific processor sets after creation. Jails can have an unrestricted (no duplicate protection, etc.) name in addition to the hostname. The jail name cannot be changed from within a jail and is considered to be used for management purposes or as audit-token in the future. DDB 'show jails' command was added to aid debugging. Proper compat support permits 32bit jail binaries to be used on 64bit systems to manage jails. Also backward compatibility was preserved where possible: for jail v1 syscalls, as well as with user space management utilities. Both jail as well as prison version were updated for the new features. A gap was intentionally left as the intermediate versions had been used by various patches floating around the last years. Bump __FreeBSD_version for the afore mentioned and in kernel changes. Special thanks to: - Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches and Olivier Houchard (cognet) for initial single-IPv6 patches. - Jeff Roberson (jeff) and Randall Stewart (rrs) for their help, ideas and review on cpuset and SCTP support. - Robert Watson (rwatson) for lots and lots of help, discussions, suggestions and review of most of the patch at various stages. - John Baldwin (jhb) for his help. - Simon L. Nielsen (simon) as early adopter testing changes on cluster machines as well as all the testers and people who provided feedback the last months on freebsd-jail and other channels. - My employer, CK Software GmbH, for the support so I could work on this. Reviewed by: (see above) MFC after: 3 months (this is just so that I get the mail) X-MFC Before: 7.2-RELEASE if possible
2008-11-29 14:32:14 +00:00
/* XXX inp locking */
if ((in6p->inp_vflag & INP_IPV6) == 0)
continue;
if (in6p->inp_ip_p &&
in6p->inp_ip_p != proto)
continue;
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_laddr) &&
!IN6_ARE_ADDR_EQUAL(&in6p->in6p_laddr, &ip6->ip6_dst))
continue;
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr) &&
!IN6_ARE_ADDR_EQUAL(&in6p->in6p_faddr, &ip6->ip6_src))
continue;
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (jailed(in6p->inp_cred)) {
/*
* Allow raw socket in jail to receive multicast;
* assume process had PRIV_NETINET_RAW at attach,
* and fall through into normal filter path if so.
*/
if (!IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst) &&
prison_check_ip6(in6p->inp_cred,
&ip6->ip6_dst) != 0)
continue;
}
if (in6p->in6p_cksum != -1) {
V_rip6stat.rip6s_isum++;
if (in6_cksum(m, proto, *offp,
m->m_pkthdr.len - *offp)) {
INP_RUNLOCK(in6p);
V_rip6stat.rip6s_badsum++;
continue;
}
}
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
INP_RLOCK(in6p);
/*
* If this raw socket has multicast state, and we
* have received a multicast, check if this socket
* should receive it, as multicast filtering is now
* the responsibility of the transport layer.
*/
if (in6p->in6p_moptions &&
IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
struct sockaddr_in6 mcaddr;
int blocked;
bzero(&mcaddr, sizeof(struct sockaddr_in6));
mcaddr.sin6_len = sizeof(struct sockaddr_in6);
mcaddr.sin6_family = AF_INET6;
mcaddr.sin6_addr = ip6->ip6_dst;
blocked = im6o_mc_filter(in6p->in6p_moptions, ifp,
(struct sockaddr *)&mcaddr,
(struct sockaddr *)&fromsa);
if (blocked != MCAST_PASS) {
IP6STAT_INC(ip6s_notmember);
continue;
}
}
if (last != NULL) {
struct mbuf *n = m_copy(m, 0, (int)M_COPYALL);
#ifdef IPSEC
/*
* Check AH/ESP integrity.
*/
if (n && ipsec6_in_reject(n, last)) {
m_freem(n);
V_ipsec6stat.in_polvio++;
/* Do not inject data into pcb. */
} else
#endif /* IPSEC */
if (n) {
if (last->inp_flags & INP_CONTROLOPTS ||
last->inp_socket->so_options & SO_TIMESTAMP)
ip6_savecontrol(last, n, &opts);
/* strip intermediate headers */
m_adj(n, *offp);
if (sbappendaddr(&last->inp_socket->so_rcv,
2003-11-02 19:09:29 +00:00
(struct sockaddr *)&fromsa,
n, opts) == 0) {
m_freem(n);
if (opts)
m_freem(opts);
V_rip6stat.rip6s_fullsock++;
} else
sorwakeup(last->inp_socket);
opts = NULL;
}
INP_RUNLOCK(last);
}
last = in6p;
}
INP_INFO_RUNLOCK(&V_ripcbinfo);
#ifdef IPSEC
/*
* Check AH/ESP integrity.
*/
2008-12-16 06:01:08 +00:00
if ((last != NULL) && ipsec6_in_reject(m, last)) {
m_freem(m);
V_ipsec6stat.in_polvio++;
V_ip6stat.ip6s_delivered--;
/* Do not inject data into pcb. */
INP_RUNLOCK(last);
} else
#endif /* IPSEC */
if (last != NULL) {
if (last->inp_flags & INP_CONTROLOPTS ||
last->inp_socket->so_options & SO_TIMESTAMP)
ip6_savecontrol(last, m, &opts);
/* Strip intermediate headers. */
m_adj(m, *offp);
if (sbappendaddr(&last->inp_socket->so_rcv,
(struct sockaddr *)&fromsa, m, opts) == 0) {
m_freem(m);
if (opts)
m_freem(opts);
V_rip6stat.rip6s_fullsock++;
} else
sorwakeup(last->inp_socket);
INP_RUNLOCK(last);
} else {
V_rip6stat.rip6s_nosock++;
if (m->m_flags & M_MCAST)
V_rip6stat.rip6s_nosockmcast++;
if (proto == IPPROTO_NONE)
m_freem(m);
else {
char *prvnxtp = ip6_get_prevhdr(m, *offp); /* XXX */
icmp6_error(m, ICMP6_PARAM_PROB,
ICMP6_PARAMPROB_NEXTHEADER,
prvnxtp - mtod(m, char *));
}
V_ip6stat.ip6s_delivered--;
}
return (IPPROTO_DONE);
}
void
rip6_ctlinput(int cmd, struct sockaddr *sa, void *d)
{
struct ip6_hdr *ip6;
struct mbuf *m;
int off = 0;
struct ip6ctlparam *ip6cp = NULL;
const struct sockaddr_in6 *sa6_src = NULL;
void *cmdarg;
2008-01-08 19:08:58 +00:00
struct inpcb *(*notify)(struct inpcb *, int) = in6_rtchange;
if (sa->sa_family != AF_INET6 ||
sa->sa_len != sizeof(struct sockaddr_in6))
return;
if ((unsigned)cmd >= PRC_NCMDS)
return;
if (PRC_IS_REDIRECT(cmd))
notify = in6_rtchange, d = NULL;
else if (cmd == PRC_HOSTDEAD)
d = NULL;
else if (inet6ctlerrmap[cmd] == 0)
return;
/*
* If the parameter is from icmp6, decode it.
*/
if (d != NULL) {
ip6cp = (struct ip6ctlparam *)d;
m = ip6cp->ip6c_m;
ip6 = ip6cp->ip6c_ip6;
off = ip6cp->ip6c_off;
cmdarg = ip6cp->ip6c_cmdarg;
sa6_src = ip6cp->ip6c_src;
} else {
m = NULL;
ip6 = NULL;
cmdarg = NULL;
sa6_src = &sa6_any;
}
(void) in6_pcbnotify(&V_ripcbinfo, sa, 0,
(const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
}
/*
* Generate IPv6 header and pass packet to ip6_output. Tack on options user
* may have setup with control call.
*/
int
#if __STDC__
rip6_output(struct mbuf *m, ...)
#else
rip6_output(m, va_alist)
struct mbuf *m;
va_dcl
#endif
{
struct mbuf *control;
struct socket *so;
struct sockaddr_in6 *dstsock;
struct in6_addr *dst;
struct ip6_hdr *ip6;
struct inpcb *in6p;
u_int plen = m->m_pkthdr.len;
int error = 0;
struct ip6_pktopts opt, *optp;
struct ifnet *oifp = NULL;
int type = 0, code = 0; /* for ICMPv6 output statistics only */
int scope_ambiguous = 0;
struct in6_addr in6a;
va_list ap;
va_start(ap, m);
so = va_arg(ap, struct socket *);
dstsock = va_arg(ap, struct sockaddr_in6 *);
control = va_arg(ap, struct mbuf *);
va_end(ap);
in6p = sotoinpcb(so);
INP_WLOCK(in6p);
dst = &dstsock->sin6_addr;
2008-12-16 06:01:08 +00:00
if (control != NULL) {
if ((error = ip6_setpktopts(control, &opt,
in6p->in6p_outputopts, so->so_cred,
so->so_proto->pr_protocol)) != 0) {
goto bad;
}
optp = &opt;
} else
optp = in6p->in6p_outputopts;
/*
* Check and convert scope zone ID into internal form.
*
* XXX: we may still need to determine the zone later.
*/
if (!(so->so_state & SS_ISCONNECTED)) {
if (dstsock->sin6_scope_id == 0 && !V_ip6_use_defzone)
scope_ambiguous = 1;
if ((error = sa6_embedscope(dstsock, V_ip6_use_defzone)) != 0)
goto bad;
}
/*
* For an ICMPv6 packet, we should know its type and code to update
* statistics.
*/
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6) {
struct icmp6_hdr *icmp6;
if (m->m_len < sizeof(struct icmp6_hdr) &&
(m = m_pullup(m, sizeof(struct icmp6_hdr))) == NULL) {
error = ENOBUFS;
goto bad;
}
icmp6 = mtod(m, struct icmp6_hdr *);
type = icmp6->icmp6_type;
code = icmp6->icmp6_code;
}
M_PREPEND(m, sizeof(*ip6), M_DONTWAIT);
if (m == NULL) {
error = ENOBUFS;
goto bad;
}
ip6 = mtod(m, struct ip6_hdr *);
/*
* Source address selection.
*/
error = in6_selectsrc(dstsock, optp, in6p, NULL, so->so_cred,
&oifp, &in6a);
if (error)
goto bad;
error = prison_get_ip6(in6p->inp_cred, &in6a);
if (error != 0)
goto bad;
ip6->ip6_src = in6a;
if (oifp && scope_ambiguous) {
/*
* Application should provide a proper zone ID or the use of
* default zone IDs should be enabled. Unfortunately, some
* applications do not behave as it should, so we need a
* workaround. Even if an appropriate ID is not determined
* (when it's required), if we can determine the outgoing
* interface. determine the zone ID based on the interface.
*/
error = in6_setscope(&dstsock->sin6_addr, oifp, NULL);
if (error != 0)
goto bad;
}
ip6->ip6_dst = dstsock->sin6_addr;
/*
* Fill in the rest of the IPv6 header fields.
*/
ip6->ip6_flow = (ip6->ip6_flow & ~IPV6_FLOWINFO_MASK) |
(in6p->inp_flow & IPV6_FLOWINFO_MASK);
ip6->ip6_vfc = (ip6->ip6_vfc & ~IPV6_VERSION_MASK) |
(IPV6_VERSION & IPV6_VERSION_MASK);
/*
* ip6_plen will be filled in ip6_output, so not fill it here.
*/
ip6->ip6_nxt = in6p->inp_ip_p;
ip6->ip6_hlim = in6_selecthlim(in6p, oifp);
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6 ||
in6p->in6p_cksum != -1) {
struct mbuf *n;
int off;
u_int16_t *p;
/* Compute checksum. */
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6)
off = offsetof(struct icmp6_hdr, icmp6_cksum);
else
off = in6p->in6p_cksum;
if (plen < off + 1) {
error = EINVAL;
goto bad;
}
off += sizeof(struct ip6_hdr);
n = m;
while (n && n->m_len <= off) {
off -= n->m_len;
n = n->m_next;
}
if (!n)
goto bad;
p = (u_int16_t *)(mtod(n, caddr_t) + off);
*p = 0;
*p = in6_cksum(m, ip6->ip6_nxt, sizeof(*ip6), plen);
}
error = ip6_output(m, optp, NULL, 0, in6p->in6p_moptions, &oifp, in6p);
if (so->so_proto->pr_protocol == IPPROTO_ICMPV6) {
if (oifp)
icmp6_ifoutstat_inc(oifp, type, code);
ICMP6STAT_INC(icp6s_outhist[type]);
} else
V_rip6stat.rip6s_opackets++;
goto freectl;
bad:
if (m)
m_freem(m);
freectl:
2008-12-16 06:01:08 +00:00
if (control != NULL) {
ip6_clearpktopts(&opt, -1);
m_freem(control);
}
INP_WUNLOCK(in6p);
return (error);
}
/*
* Raw IPv6 socket option processing.
*/
int
rip6_ctloutput(struct socket *so, struct sockopt *sopt)
{
int error;
if (sopt->sopt_level == IPPROTO_ICMPV6)
/*
* XXX: is it better to call icmp6_ctloutput() directly
* from protosw?
*/
return (icmp6_ctloutput(so, sopt));
else if (sopt->sopt_level != IPPROTO_IPV6)
return (EINVAL);
error = 0;
switch (sopt->sopt_dir) {
case SOPT_GET:
switch (sopt->sopt_name) {
case MRT6_INIT:
case MRT6_DONE:
case MRT6_ADD_MIF:
case MRT6_DEL_MIF:
case MRT6_ADD_MFC:
case MRT6_DEL_MFC:
case MRT6_PIM:
error = ip6_mrouter_get ? ip6_mrouter_get(so, sopt) :
EOPNOTSUPP;
break;
case IPV6_CHECKSUM:
error = ip6_raw_ctloutput(so, sopt);
break;
default:
error = ip6_ctloutput(so, sopt);
break;
}
break;
case SOPT_SET:
switch (sopt->sopt_name) {
case MRT6_INIT:
case MRT6_DONE:
case MRT6_ADD_MIF:
case MRT6_DEL_MIF:
case MRT6_ADD_MFC:
case MRT6_DEL_MFC:
case MRT6_PIM:
error = ip6_mrouter_set ? ip6_mrouter_set(so, sopt) :
EOPNOTSUPP;
break;
case IPV6_CHECKSUM:
error = ip6_raw_ctloutput(so, sopt);
break;
default:
error = ip6_ctloutput(so, sopt);
break;
}
break;
}
return (error);
}
static int
rip6_attach(struct socket *so, int proto, struct thread *td)
{
struct inpcb *inp;
struct icmp6_filter *filter;
int error;
inp = sotoinpcb(so);
KASSERT(inp == NULL, ("rip6_attach: inp != NULL"));
error = priv_check(td, PRIV_NETINET_RAW);
if (error)
return (error);
error = soreserve(so, rip_sendspace, rip_recvspace);
if (error)
return (error);
filter = malloc(sizeof(struct icmp6_filter), M_PCB, M_NOWAIT);
if (filter == NULL)
return (ENOMEM);
INP_INFO_WLOCK(&V_ripcbinfo);
error = in_pcballoc(so, &V_ripcbinfo);
if (error) {
INP_INFO_WUNLOCK(&V_ripcbinfo);
free(filter, M_PCB);
return (error);
}
inp = (struct inpcb *)so->so_pcb;
INP_INFO_WUNLOCK(&V_ripcbinfo);
inp->inp_vflag |= INP_IPV6;
inp->inp_ip_p = (long)proto;
inp->in6p_hops = -1; /* use kernel default */
inp->in6p_cksum = -1;
inp->in6p_icmp6filt = filter;
ICMP6_FILTER_SETPASSALL(inp->in6p_icmp6filt);
INP_WUNLOCK(inp);
return (0);
}
static void
rip6_detach(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_detach: inp == NULL"));
Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit: import from p4 bms_netdev. Summary of changes: * Connect netinet6/in6_mcast.c to build. The legacy KAME KPIs are mostly preserved. * Eliminate now dead code from ip6_output.c. Don't do mbuf bingo, we are not going to do RFC 2292 style CMSG tricks for multicast options as they are not required by any current IPv6 normative reference. * Refactor transports (UDP, raw_ip6) to do own mcast filtering. SCTP, TCP unaffected by this change. * Add ip6_msource, in6_msource structs to in6_var.h. * Hookup mld_ifinfo state to in6_ifextra, allocate from domifattach path. * Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced. Kernel consumers which need this should use in6m_lookup(). * Refactor IPv6 socket group memberships to use a vector (like IPv4). * Update ifmcstat(8) for IPv6 SSM. * Add witness lock order for IN6_MULTI_LOCK. * Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths. * Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup. * Update carp(4) for new IPv6 SSM KPIs. * Virtualize ip6_mrouter socket. Changes mostly localized to IPv6 MROUTING. * Don't do a local group lookup in MROUTING. * Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge(). * Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode. * Bump __FreeBSD_version to 800084. * Update UPDATING. NOTE WELL: * This code hasn't been tested against real MLDv2 queriers (yet), although the on-wire protocol has been verified in Wireshark. * There are a few unresolved issues in the socket layer APIs to do with scope ID propagation. * There is a LOR present in ip6_output()'s use of in6_setscope() which needs to be resolved. See comments in mld6.c. This is believed to be benign and can't be avoided for the moment without re-introducing an indirect netisr. This work was mostly derived from the IGMPv3 implementation, and has been sponsored by a third party.
2009-04-29 19:19:13 +00:00
if (so == V_ip6_mrouter && ip6_mrouter_done)
ip6_mrouter_done();
/* xxx: RSVP */
INP_INFO_WLOCK(&V_ripcbinfo);
INP_WLOCK(inp);
free(inp->in6p_icmp6filt, M_PCB);
in_pcbdetach(inp);
in_pcbfree(inp);
INP_INFO_WUNLOCK(&V_ripcbinfo);
}
/* XXXRW: This can't ever be called. */
static void
rip6_abort(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_abort: inp == NULL"));
soisdisconnected(so);
}
static void
rip6_close(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_close: inp == NULL"));
soisdisconnected(so);
}
static int
rip6_disconnect(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_disconnect: inp == NULL"));
if ((so->so_state & SS_ISCONNECTED) == 0)
return (ENOTCONN);
inp->in6p_faddr = in6addr_any;
rip6_abort(so);
return (0);
}
static int
rip6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
struct sockaddr_in6 *addr = (struct sockaddr_in6 *)nam;
struct ifaddr *ifa = NULL;
int error = 0;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_bind: inp == NULL"));
if (nam->sa_len != sizeof(*addr))
return (EINVAL);
if ((error = prison_check_ip6(td->td_ucred, &addr->sin6_addr)) != 0)
return (error);
if (TAILQ_EMPTY(&V_ifnet) || addr->sin6_family != AF_INET6)
return (EADDRNOTAVAIL);
if ((error = sa6_embedscope(addr, V_ip6_use_defzone)) != 0)
return (error);
if (!IN6_IS_ADDR_UNSPECIFIED(&addr->sin6_addr) &&
(ifa = ifa_ifwithaddr((struct sockaddr *)addr)) == NULL)
return (EADDRNOTAVAIL);
if (ifa != NULL &&
((struct in6_ifaddr *)ifa)->ia6_flags &
(IN6_IFF_ANYCAST|IN6_IFF_NOTREADY|
IN6_IFF_DETACHED|IN6_IFF_DEPRECATED)) {
ifa_free(ifa);
return (EADDRNOTAVAIL);
}
if (ifa != NULL)
ifa_free(ifa);
INP_INFO_WLOCK(&V_ripcbinfo);
INP_WLOCK(inp);
inp->in6p_laddr = addr->sin6_addr;
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_ripcbinfo);
return (0);
}
static int
rip6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
struct sockaddr_in6 *addr = (struct sockaddr_in6 *)nam;
struct in6_addr in6a;
struct ifnet *ifp = NULL;
int error = 0, scope_ambiguous = 0;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_connect: inp == NULL"));
if (nam->sa_len != sizeof(*addr))
return (EINVAL);
if (TAILQ_EMPTY(&V_ifnet))
return (EADDRNOTAVAIL);
if (addr->sin6_family != AF_INET6)
return (EAFNOSUPPORT);
/*
* Application should provide a proper zone ID or the use of default
* zone IDs should be enabled. Unfortunately, some applications do
* not behave as it should, so we need a workaround. Even if an
* appropriate ID is not determined, we'll see if we can determine
* the outgoing interface. If we can, determine the zone ID based on
* the interface below.
*/
if (addr->sin6_scope_id == 0 && !V_ip6_use_defzone)
scope_ambiguous = 1;
if ((error = sa6_embedscope(addr, V_ip6_use_defzone)) != 0)
return (error);
INP_INFO_WLOCK(&V_ripcbinfo);
INP_WLOCK(inp);
/* Source address selection. XXX: need pcblookup? */
error = in6_selectsrc(addr, inp->in6p_outputopts,
inp, NULL, so->so_cred, &ifp, &in6a);
if (error) {
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_ripcbinfo);
return (error);
}
/* XXX: see above */
if (ifp && scope_ambiguous &&
(error = in6_setscope(&addr->sin6_addr, ifp, NULL)) != 0) {
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_ripcbinfo);
return (error);
}
inp->in6p_faddr = addr->sin6_addr;
inp->in6p_laddr = in6a;
soisconnected(so);
INP_WUNLOCK(inp);
INP_INFO_WUNLOCK(&V_ripcbinfo);
return (0);
}
static int
rip6_shutdown(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_shutdown: inp == NULL"));
INP_WLOCK(inp);
socantsendmore(so);
INP_WUNLOCK(inp);
return (0);
}
static int
rip6_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *nam,
struct mbuf *control, struct thread *td)
{
struct inpcb *inp;
struct sockaddr_in6 tmp;
struct sockaddr_in6 *dst;
int ret;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("rip6_send: inp == NULL"));
/* Always copy sockaddr to avoid overwrites. */
/* Unlocked read. */
if (so->so_state & SS_ISCONNECTED) {
if (nam) {
m_freem(m);
return (EISCONN);
}
/* XXX */
bzero(&tmp, sizeof(tmp));
tmp.sin6_family = AF_INET6;
tmp.sin6_len = sizeof(struct sockaddr_in6);
INP_RLOCK(inp);
bcopy(&inp->in6p_faddr, &tmp.sin6_addr,
sizeof(struct in6_addr));
INP_RUNLOCK(inp);
dst = &tmp;
} else {
if (nam == NULL) {
m_freem(m);
return (ENOTCONN);
}
if (nam->sa_len != sizeof(struct sockaddr_in6)) {
m_freem(m);
return (EINVAL);
}
tmp = *(struct sockaddr_in6 *)nam;
dst = &tmp;
if (dst->sin6_family == AF_UNSPEC) {
/*
* XXX: we allow this case for backward
* compatibility to buggy applications that
* rely on old (and wrong) kernel behavior.
*/
log(LOG_INFO, "rip6 SEND: address family is "
"unspec. Assume AF_INET6\n");
dst->sin6_family = AF_INET6;
} else if (dst->sin6_family != AF_INET6) {
m_freem(m);
return(EAFNOSUPPORT);
}
}
ret = rip6_output(m, so, dst, control);
return (ret);
}
struct pr_usrreqs rip6_usrreqs = {
.pru_abort = rip6_abort,
.pru_attach = rip6_attach,
.pru_bind = rip6_bind,
.pru_connect = rip6_connect,
.pru_control = in6_control,
.pru_detach = rip6_detach,
.pru_disconnect = rip6_disconnect,
.pru_peeraddr = in6_getpeeraddr,
.pru_send = rip6_send,
.pru_shutdown = rip6_shutdown,
.pru_sockaddr = in6_getsockaddr,
.pru_close = rip6_close,
};