d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6f34487cc9
freebsd-nq/sys/dev/et/if_et.c

2729 lines
71 KiB
C
Raw Normal View History

Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/*-
Change copyright holder to author. We prefer using a real legal entity for copyright holders. Approved by: sephe MFC after: 3 days
2010-07-30 17:51:22 +00:00
* Copyright (c) 2007 Sepherosa Ziehau. All rights reserved.
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
*
* This code is derived from software contributed to The DragonFly Project
* by Sepherosa Ziehau <sepherosa@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name of The DragonFly Project nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific, prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $DragonFly: src/sys/dev/netif/et/if_et.c,v 1.10 2008/05/18 07:47:14 sephe Exp $
*/
Add __FBSDID.
2009-11-20 20:40:34 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/proc.h>
#include <sys/rman.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <net/ethernet.h>
#include <net/if.h>
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-26 17:58:36 +00:00
#include <net/if_var.h>
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/bpf.h>
#include <net/if_arp.h>
#include <net/if_media.h>
#include <net/if_vlan_var.h>
#include <machine/bus.h>
Converted the remainder of the NIC drivers to use the mii_attach() introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these are only straight forward conversions though. Reviewed by: yongari
2010-10-15 15:00:30 +00:00
#include <dev/mii/mii.h>
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/et/if_etreg.h>
#include <dev/et/if_etvar.h>
#include "miibus_if.h"
MODULE_DEPEND(et, pci, 1, 1, 1);
MODULE_DEPEND(et, ether, 1, 1, 1);
MODULE_DEPEND(et, miibus, 1, 1, 1);
Add MSI support.
2009-11-19 21:45:06 +00:00
/* Tunables. */
static int msi_disable = 0;
Fix copy & paste error and remove extra space before colon. Pointed out by: danfe
2009-11-19 22:59:52 +00:00
TUNABLE_INT("hw.et.msi_disable", &msi_disable);
Add MSI support.
2009-11-19 21:45:06 +00:00
Add IPv4/TCP/UDP Tx checksum offloading support. It seems the controller also has support for IP/TCP checksum offloading for Rx path. But I failed to find to way to enable Rx MAC to compute the checksum of received frames.
2009-11-20 20:33:59 +00:00
#define ET_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static int et_probe(device_t);
static int et_attach(device_t);
static int et_detach(device_t);
static int et_shutdown(device_t);
Implement suspend/resume methods. Driver has no issue with suspend/resume.
2011-12-05 22:22:39 +00:00
static int et_suspend(device_t);
static int et_resume(device_t);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static int et_miibus_readreg(device_t, int, int);
static int et_miibus_writereg(device_t, int, int, int);
static void et_miibus_statchg(device_t);
static void et_init_locked(struct et_softc *);
static void et_init(void *);
static int et_ioctl(struct ifnet *, u_long, caddr_t);
static void et_start_locked(struct ifnet *);
static void et_start(struct ifnet *);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static int et_watchdog(struct et_softc *);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static int et_ifmedia_upd_locked(struct ifnet *);
static int et_ifmedia_upd(struct ifnet *);
static void et_ifmedia_sts(struct ifnet *, struct ifmediareq *);
static void et_add_sysctls(struct et_softc *);
static int et_sysctl_rx_intr_npkts(SYSCTL_HANDLER_ARGS);
static int et_sysctl_rx_intr_delay(SYSCTL_HANDLER_ARGS);
static void et_intr(void *);
static void et_rxeof(struct et_softc *);
static void et_txeof(struct et_softc *);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static int et_dma_alloc(struct et_softc *);
static void et_dma_free(struct et_softc *);
static void et_dma_map_addr(void *, bus_dma_segment_t *, int, int);
static int et_dma_ring_alloc(struct et_softc *, bus_size_t, bus_size_t,
bus_dma_tag_t *, uint8_t **, bus_dmamap_t *, bus_addr_t *,
const char *);
static void et_dma_ring_free(struct et_softc *, bus_dma_tag_t *, uint8_t **,
bus_dmamap_t *);
static void et_init_tx_ring(struct et_softc *);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static int et_init_rx_ring(struct et_softc *);
static void et_free_tx_ring(struct et_softc *);
static void et_free_rx_ring(struct et_softc *);
static int et_encap(struct et_softc *, struct mbuf **);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static int et_newbuf_cluster(struct et_rxbuf_data *, int);
static int et_newbuf_hdr(struct et_rxbuf_data *, int);
static void et_rxbuf_discard(struct et_rxbuf_data *, int);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static void et_stop(struct et_softc *);
static int et_chip_init(struct et_softc *);
static void et_chip_attach(struct et_softc *);
static void et_init_mac(struct et_softc *);
static void et_init_rxmac(struct et_softc *);
static void et_init_txmac(struct et_softc *);
static int et_init_rxdma(struct et_softc *);
static int et_init_txdma(struct et_softc *);
static int et_start_rxdma(struct et_softc *);
static int et_start_txdma(struct et_softc *);
static int et_stop_rxdma(struct et_softc *);
static int et_stop_txdma(struct et_softc *);
static void et_reset(struct et_softc *);
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
static int et_bus_config(struct et_softc *);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static void et_get_eaddr(device_t, uint8_t[]);
static void et_setmulti(struct et_softc *);
static void et_tick(void *);
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
static void et_stats_update(struct et_softc *);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static const struct et_dev {
uint16_t vid;
uint16_t did;
const char *desc;
} et_devices[] = {
{ PCI_VENDOR_LUCENT, PCI_PRODUCT_LUCENT_ET1310,
"Agere ET1310 Gigabit Ethernet" },
{ PCI_VENDOR_LUCENT, PCI_PRODUCT_LUCENT_ET1310_FAST,
"Agere ET1310 Fast Ethernet" },
{ 0, 0, NULL }
};
static device_method_t et_methods[] = {
DEVMETHOD(device_probe, et_probe),
DEVMETHOD(device_attach, et_attach),
DEVMETHOD(device_detach, et_detach),
DEVMETHOD(device_shutdown, et_shutdown),
Implement suspend/resume methods. Driver has no issue with suspend/resume.
2011-12-05 22:22:39 +00:00
DEVMETHOD(device_suspend, et_suspend),
DEVMETHOD(device_resume, et_resume),
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
DEVMETHOD(miibus_readreg, et_miibus_readreg),
DEVMETHOD(miibus_writereg, et_miibus_writereg),
DEVMETHOD(miibus_statchg, et_miibus_statchg),
- There's no need to overwrite the default device method with the default one. Interestingly, these are actually the default for quite some time (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9) since r52045) but even recently added device drivers do this unnecessarily. Discussed with: jhb, marcel - While at it, use DEVMETHOD_END. Discussed with: jhb - Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
DEVMETHOD_END
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
};
static driver_t et_driver = {
"et",
et_methods,
sizeof(struct et_softc)
};
static devclass_t et_devclass;
DRIVER_MODULE(et, pci, et_driver, et_devclass, 0, 0);
DRIVER_MODULE(miibus, et, miibus_driver, miibus_devclass, 0, 0);
static int et_rx_intr_npkts = 32;
static int et_rx_intr_delay = 20; /* x10 usec */
static int et_tx_intr_nsegs = 126;
static uint32_t et_timer = 1000 * 1000 * 1000; /* nanosec */
TUNABLE_INT("hw.et.timer", &et_timer);
TUNABLE_INT("hw.et.rx_intr_npkts", &et_rx_intr_npkts);
TUNABLE_INT("hw.et.rx_intr_delay", &et_rx_intr_delay);
TUNABLE_INT("hw.et.tx_intr_nsegs", &et_tx_intr_nsegs);
static int
et_probe(device_t dev)
{
const struct et_dev *d;
uint16_t did, vid;
vid = pci_get_vendor(dev);
did = pci_get_device(dev);
for (d = et_devices; d->desc != NULL; ++d) {
if (vid == d->vid && did == d->did) {
device_set_desc(dev, d->desc);
Make et_probe() return BUS_PROBE_DEFAULT such that allow other driver that has high precedence for the controller override et(4). Add missing callout_drain(9) in device detach and rework detach routine. While I'm here use rman_get_rid(9) instead of using cached resource id because bus methods are free to change the id.
2011-12-06 00:58:42 +00:00
return (BUS_PROBE_DEFAULT);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
}
style(9)
2009-11-19 21:53:21 +00:00
return (ENXIO);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_attach(device_t dev)
{
struct et_softc *sc;
struct ifnet *ifp;
uint8_t eaddr[ETHER_ADDR_LEN];
Disable all clocks and put PHY into COMA before entering into suspend state. This will save more power. On resume, make sure to enable all clocks. While I'm here, if controller is not fast ethernet, enable gigabit PHY.
2011-12-07 23:20:14 +00:00
uint32_t pmcfg;
Add MSI support.
2009-11-19 21:45:06 +00:00
int cap, error, msic;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
sc = device_get_softc(dev);
sc->dev = dev;
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
et(4) supports VLAN oversized frame so correctly set header length. While I'm here remove initializing if_mtu, it is set by ether_ifattach(9). Also move callout_init_mtx(9) to the right below driver lock initialization.
2011-12-06 00:18:37 +00:00
callout_init_mtx(&sc->sc_tick, &sc->sc_mtx, 0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ifp = sc->ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(dev, "can not if_alloc()\n");
error = ENOSPC;
goto fail;
}
/*
* Initialize tunables
*/
sc->sc_rx_intr_npkts = et_rx_intr_npkts;
sc->sc_rx_intr_delay = et_rx_intr_delay;
sc->sc_tx_intr_nsegs = et_tx_intr_nsegs;
sc->sc_timer = et_timer;
/* Enable bus mastering */
pci_enable_busmaster(dev);
/*
* Allocate IO memory
*/
Remove unnecessary definition of ET_PCIR_BAR. Controller support I/O memory only. While here, use pci_set_max_read_req(9) rather than directly manipulating PCIe device control register.
2011-12-09 18:34:45 +00:00
sc->sc_mem_rid = PCIR_BAR(0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
Remove unnecessary definition of ET_PCIR_BAR. Controller support I/O memory only. While here, use pci_set_max_read_req(9) rather than directly manipulating PCIe device control register.
2011-12-09 18:34:45 +00:00
&sc->sc_mem_rid, RF_ACTIVE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (sc->sc_mem_res == NULL) {
device_printf(dev, "can't allocate IO memory\n");
style(9)
2009-11-19 21:53:21 +00:00
return (ENXIO);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Add MSI support.
2009-11-19 21:45:06 +00:00
msic = 0;
Do a sweep of the tree replacing calls to pci_find_extcap() with calls to pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
if (pci_find_cap(dev, PCIY_EXPRESS, &cap) == 0) {
Add MSI support.
2009-11-19 21:45:06 +00:00
sc->sc_expcap = cap;
sc->sc_flags |= ET_FLAG_PCIE;
msic = pci_msi_count(dev);
if (bootverbose)
Fix copy & paste error and remove extra space before colon. Pointed out by: danfe
2009-11-19 22:59:52 +00:00
device_printf(dev, "MSI count: %d\n", msic);
Add MSI support.
2009-11-19 21:45:06 +00:00
}
if (msic > 0 && msi_disable == 0) {
msic = 1;
if (pci_alloc_msi(dev, &msic) == 0) {
if (msic == 1) {
device_printf(dev, "Using %d MSI message\n",
msic);
sc->sc_flags |= ET_FLAG_MSI;
} else
pci_release_msi(dev);
}
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/*
* Allocate IRQ
*/
Add MSI support.
2009-11-19 21:45:06 +00:00
if ((sc->sc_flags & ET_FLAG_MSI) == 0) {
sc->sc_irq_rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->sc_irq_rid, RF_SHAREABLE | RF_ACTIVE);
} else {
sc->sc_irq_rid = 1;
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&sc->sc_irq_rid, RF_ACTIVE);
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (sc->sc_irq_res == NULL) {
device_printf(dev, "can't allocate irq\n");
error = ENXIO;
goto fail;
}
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
if (pci_get_device(dev) == PCI_PRODUCT_LUCENT_ET1310_FAST)
sc->sc_flags |= ET_FLAG_FASTETHER;
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
error = et_bus_config(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error)
goto fail;
et_get_eaddr(dev, eaddr);
Disable all clocks and put PHY into COMA before entering into suspend state. This will save more power. On resume, make sure to enable all clocks. While I'm here, if controller is not fast ethernet, enable gigabit PHY.
2011-12-07 23:20:14 +00:00
/* Take PHY out of COMA and enable clocks. */
pmcfg = ET_PM_SYSCLK_GATE | ET_PM_TXCLK_GATE | ET_PM_RXCLK_GATE;
if ((sc->sc_flags & ET_FLAG_FASTETHER) == 0)
pmcfg |= EM_PM_GIGEPHY_ENB;
CSR_WRITE_4(sc, ET_PM, pmcfg);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_reset(sc);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
error = et_dma_alloc(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error)
goto fail;
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = et_init;
ifp->if_ioctl = et_ioctl;
ifp->if_start = et_start;
Only Tx checksum offloading is supported now. Remove experimental code sneaked in r199611.
2009-11-20 20:43:16 +00:00
ifp->if_capabilities = IFCAP_TXCSUM | IFCAP_VLAN_MTU;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ifp->if_capenable = ifp->if_capabilities;
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
ifp->if_snd.ifq_drv_maxlen = ET_TX_NDESC - 1;
IFQ_SET_MAXLEN(&ifp->if_snd, ET_TX_NDESC - 1);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
IFQ_SET_READY(&ifp->if_snd);
et_chip_attach(sc);
Converted the remainder of the NIC drivers to use the mii_attach() introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these are only straight forward conversions though. Reviewed by: yongari
2010-10-15 15:00:30 +00:00
error = mii_attach(dev, &sc->sc_miibus, ifp, et_ifmedia_upd,
Announce flow control ability to PHY driver and enable RX flow control. Controller does not automatically generate pause frames based on number of available RX buffers so it's very hard to know when driver should generate XON frame in time. The only mechanism driver can detect low number of RX buffer condition is ET_INTR_RXRING0_LOW or ET_INTR_RXRING1_LOW interrupt. This interrupt is generated whenever controller notices the number of available RX buffers are lower than pre-programmed value( ET_RX_RING0_MINCNT and ET_RX_RING1_MINCNT register). This scheme does not provide a way to detect when controller sees enough number of RX buffers again such that efficient generation of XON/XOFF frame is not easy. While here, add more flow control related register definition.
2011-12-09 19:10:38 +00:00
et_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY,
MIIF_DOPAUSE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error) {
Converted the remainder of the NIC drivers to use the mii_attach() introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these are only straight forward conversions though. Reviewed by: yongari
2010-10-15 15:00:30 +00:00
device_printf(dev, "attaching PHYs failed\n");
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
goto fail;
}
ether_ifattach(ifp, eaddr);
et(4) supports VLAN oversized frame so correctly set header length. While I'm here remove initializing if_mtu, it is set by ether_ifattach(9). Also move callout_init_mtx(9) to the right below driver lock initialization.
2011-12-06 00:18:37 +00:00
/* Tell the upper layer(s) we support long frames. */
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
error = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_NET | INTR_MPSAFE,
Add MSI support.
2009-11-19 21:45:06 +00:00
NULL, et_intr, sc, &sc->sc_irq_handle);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error) {
ether_ifdetach(ifp);
device_printf(dev, "can't setup intr\n");
goto fail;
}
et_add_sysctls(sc);
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
fail:
et_detach(dev);
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_detach(device_t dev)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = device_get_softc(dev);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (device_is_attached(dev)) {
Make et_probe() return BUS_PROBE_DEFAULT such that allow other driver that has high precedence for the controller override et(4). Add missing callout_drain(9) in device detach and rework detach routine. While I'm here use rman_get_rid(9) instead of using cached resource id because bus methods are free to change the id.
2011-12-06 00:58:42 +00:00
ether_ifdetach(sc->ifp);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK(sc);
et_stop(sc);
ET_UNLOCK(sc);
Make et_probe() return BUS_PROBE_DEFAULT such that allow other driver that has high precedence for the controller override et(4). Add missing callout_drain(9) in device detach and rework detach routine. While I'm here use rman_get_rid(9) instead of using cached resource id because bus methods are free to change the id.
2011-12-06 00:58:42 +00:00
callout_drain(&sc->sc_tick);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
if (sc->sc_miibus != NULL)
device_delete_child(dev, sc->sc_miibus);
bus_generic_detach(dev);
Make et_probe() return BUS_PROBE_DEFAULT such that allow other driver that has high precedence for the controller override et(4). Add missing callout_drain(9) in device detach and rework detach routine. While I'm here use rman_get_rid(9) instead of using cached resource id because bus methods are free to change the id.
2011-12-06 00:58:42 +00:00
if (sc->sc_irq_handle != NULL)
bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_handle);
if (sc->sc_irq_res != NULL)
bus_release_resource(dev, SYS_RES_IRQ,
rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
Add MSI support.
2009-11-19 21:45:06 +00:00
if ((sc->sc_flags & ET_FLAG_MSI) != 0)
pci_release_msi(dev);
Make et_probe() return BUS_PROBE_DEFAULT such that allow other driver that has high precedence for the controller override et(4). Add missing callout_drain(9) in device detach and rework detach routine. While I'm here use rman_get_rid(9) instead of using cached resource id because bus methods are free to change the id.
2011-12-06 00:58:42 +00:00
if (sc->sc_mem_res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(sc->sc_mem_res), sc->sc_mem_res);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (sc->ifp != NULL)
if_free(sc->ifp);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
et_dma_free(sc);
Destroy driver mutex in device detach.
2009-11-19 21:39:43 +00:00
mtx_destroy(&sc->sc_mtx);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_shutdown(device_t dev)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = device_get_softc(dev);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK(sc);
et_stop(sc);
ET_UNLOCK(sc);
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_miibus_readreg(device_t dev, int phy, int reg)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
uint32_t val;
int i, ret;
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = device_get_softc(dev);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/* Stop any pending operations */
CSR_WRITE_4(sc, ET_MII_CMD, 0);
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val = (phy << ET_MII_ADDR_PHY_SHIFT) & ET_MII_ADDR_PHY_MASK;
val |= (reg << ET_MII_ADDR_REG_SHIFT) & ET_MII_ADDR_REG_MASK;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_MII_ADDR, val);
/* Start reading */
CSR_WRITE_4(sc, ET_MII_CMD, ET_MII_CMD_READ);
#define NRETRY 50
for (i = 0; i < NRETRY; ++i) {
val = CSR_READ_4(sc, ET_MII_IND);
if ((val & (ET_MII_IND_BUSY | ET_MII_IND_INVALID)) == 0)
break;
DELAY(50);
}
if (i == NRETRY) {
if_printf(sc->ifp,
"read phy %d, reg %d timed out\n", phy, reg);
ret = 0;
goto back;
}
#undef NRETRY
val = CSR_READ_4(sc, ET_MII_STAT);
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
ret = val & ET_MII_STAT_VALUE_MASK;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
back:
/* Make sure that the current operation is stopped */
CSR_WRITE_4(sc, ET_MII_CMD, 0);
style(9)
2009-11-19 21:53:21 +00:00
return (ret);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_miibus_writereg(device_t dev, int phy, int reg, int val0)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
uint32_t val;
int i;
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = device_get_softc(dev);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/* Stop any pending operations */
CSR_WRITE_4(sc, ET_MII_CMD, 0);
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val = (phy << ET_MII_ADDR_PHY_SHIFT) & ET_MII_ADDR_PHY_MASK;
val |= (reg << ET_MII_ADDR_REG_SHIFT) & ET_MII_ADDR_REG_MASK;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_MII_ADDR, val);
/* Start writing */
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
CSR_WRITE_4(sc, ET_MII_CTRL,
(val0 << ET_MII_CTRL_VALUE_SHIFT) & ET_MII_CTRL_VALUE_MASK);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
#define NRETRY 100
for (i = 0; i < NRETRY; ++i) {
val = CSR_READ_4(sc, ET_MII_IND);
if ((val & ET_MII_IND_BUSY) == 0)
break;
DELAY(50);
}
if (i == NRETRY) {
if_printf(sc->ifp,
"write phy %d, reg %d timed out\n", phy, reg);
et_miibus_readreg(dev, phy, reg);
}
#undef NRETRY
/* Make sure that the current operation is stopped */
CSR_WRITE_4(sc, ET_MII_CMD, 0);
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_miibus_statchg(device_t dev)
{
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
struct et_softc *sc;
struct mii_data *mii;
struct ifnet *ifp;
uint32_t cfg1, cfg2, ctrl;
int i;
sc = device_get_softc(dev);
mii = device_get_softc(sc->sc_miibus);
ifp = sc->ifp;
if (mii == NULL || ifp == NULL ||
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
return;
sc->sc_flags &= ~ET_FLAG_LINK;
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
(IFM_ACTIVE | IFM_AVALID)) {
switch (IFM_SUBTYPE(mii->mii_media_active)) {
case IFM_10_T:
case IFM_100_TX:
sc->sc_flags |= ET_FLAG_LINK;
break;
case IFM_1000_T:
if ((sc->sc_flags & ET_FLAG_FASTETHER) == 0)
sc->sc_flags |= ET_FLAG_LINK;
break;
}
}
/* XXX Stop TX/RX MAC? */
if ((sc->sc_flags & ET_FLAG_LINK) == 0)
return;
/* Program MACs with resolved speed/duplex/flow-control. */
ctrl = CSR_READ_4(sc, ET_MAC_CTRL);
ctrl &= ~(ET_MAC_CTRL_GHDX | ET_MAC_CTRL_MODE_MII);
cfg1 = CSR_READ_4(sc, ET_MAC_CFG1);
cfg1 &= ~(ET_MAC_CFG1_TXFLOW | ET_MAC_CFG1_RXFLOW |
ET_MAC_CFG1_LOOPBACK);
cfg2 = CSR_READ_4(sc, ET_MAC_CFG2);
cfg2 &= ~(ET_MAC_CFG2_MODE_MII | ET_MAC_CFG2_MODE_GMII |
ET_MAC_CFG2_FDX | ET_MAC_CFG2_BIGFRM);
cfg2 |= ET_MAC_CFG2_LENCHK | ET_MAC_CFG2_CRC | ET_MAC_CFG2_PADCRC |
((7 << ET_MAC_CFG2_PREAMBLE_LEN_SHIFT) &
ET_MAC_CFG2_PREAMBLE_LEN_MASK);
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T)
cfg2 |= ET_MAC_CFG2_MODE_GMII;
else {
cfg2 |= ET_MAC_CFG2_MODE_MII;
ctrl |= ET_MAC_CTRL_MODE_MII;
}
if (IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) {
cfg2 |= ET_MAC_CFG2_FDX;
Announce flow control ability to PHY driver and enable RX flow control. Controller does not automatically generate pause frames based on number of available RX buffers so it's very hard to know when driver should generate XON frame in time. The only mechanism driver can detect low number of RX buffer condition is ET_INTR_RXRING0_LOW or ET_INTR_RXRING1_LOW interrupt. This interrupt is generated whenever controller notices the number of available RX buffers are lower than pre-programmed value( ET_RX_RING0_MINCNT and ET_RX_RING1_MINCNT register). This scheme does not provide a way to detect when controller sees enough number of RX buffers again such that efficient generation of XON/XOFF frame is not easy. While here, add more flow control related register definition.
2011-12-09 19:10:38 +00:00
/*
* Controller lacks automatic TX pause frame
* generation so it should be handled by driver.
* Even though driver can send pause frame with
* arbitrary pause time, controller does not
* provide a way that tells how many free RX
* buffers are available in controller. This
* limitation makes it hard to generate XON frame
* in time on driver side so don't enable TX flow
* control.
*/
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
#ifdef notyet
if (IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE)
cfg1 |= ET_MAC_CFG1_TXFLOW;
Announce flow control ability to PHY driver and enable RX flow control. Controller does not automatically generate pause frames based on number of available RX buffers so it's very hard to know when driver should generate XON frame in time. The only mechanism driver can detect low number of RX buffer condition is ET_INTR_RXRING0_LOW or ET_INTR_RXRING1_LOW interrupt. This interrupt is generated whenever controller notices the number of available RX buffers are lower than pre-programmed value( ET_RX_RING0_MINCNT and ET_RX_RING1_MINCNT register). This scheme does not provide a way to detect when controller sees enough number of RX buffers again such that efficient generation of XON/XOFF frame is not easy. While here, add more flow control related register definition.
2011-12-09 19:10:38 +00:00
#endif
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
if (IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE)
cfg1 |= ET_MAC_CFG1_RXFLOW;
} else
ctrl |= ET_MAC_CTRL_GHDX;
CSR_WRITE_4(sc, ET_MAC_CTRL, ctrl);
CSR_WRITE_4(sc, ET_MAC_CFG2, cfg2);
cfg1 |= ET_MAC_CFG1_TXEN | ET_MAC_CFG1_RXEN;
CSR_WRITE_4(sc, ET_MAC_CFG1, cfg1);
#define NRETRY 50
for (i = 0; i < NRETRY; ++i) {
cfg1 = CSR_READ_4(sc, ET_MAC_CFG1);
if ((cfg1 & (ET_MAC_CFG1_SYNC_TXEN | ET_MAC_CFG1_SYNC_RXEN)) ==
(ET_MAC_CFG1_SYNC_TXEN | ET_MAC_CFG1_SYNC_RXEN))
break;
DELAY(100);
}
if (i == NRETRY)
if_printf(ifp, "can't enable RX/TX\n");
sc->sc_flags |= ET_FLAG_TXRX_ENABLED;
#undef NRETRY
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_ifmedia_upd_locked(struct ifnet *ifp)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
struct mii_data *mii;
- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP (reporting IFM_LOOP based on BMCR_LOOP is left in place though as it might provide useful for debugging). For most mii(4) drivers it was unclear whether the PHYs driven by them actually support loopback or not. Moreover, typically loopback mode also needs to be activated on the MAC, which none of the Ethernet drivers using mii(4) implements. Given that loopback media has no real use (and obviously hardly had a chance to actually work) besides for driver development (which just loopback mode should be sufficient for though, i.e one doesn't necessary need support for loopback media) support for it is just dropped as both NetBSD and OpenBSD already did quite some time ago. - Let mii_phy_add_media() also announce the support of IFM_NONE. - Restructure the PHY entry points to use a structure of entry points instead of discrete function pointers, and extend this to include a "reset" entry point. Make sure any PHY-specific reset routine is always used, and provide one for lxtphy(4) which disables MII interrupts (as is done for a few other PHYs we have drivers for). This includes changing NIC drivers which previously just called the generic mii_phy_reset() to now actually call the PHY-specific reset routine, which might be crucial in some cases. While at it, the redundant checks in these NIC drivers for mii->mii_instance not being zero before calling the reset routines were removed because as soon as one PHY driver attaches mii->mii_instance is incremented and we hardly can end up in their media change callbacks etc if no PHY driver has attached as mii_attach() would have failed in that case and not attach a miibus(4) instance. Consequently, NIC drivers now no longer should call mii_phy_reset() directly, so it was removed from EXPORT_SYMS. - Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe(). The purpose of that function is to perform the common steps to attach a PHY driver instance and to hook it up to the miibus(4) instance and to optionally also handle the probing, addition and initialization of the supported media. So all a PHY driver without any special requirements has to do in its bus attach method is to call mii_phy_dev_attach() along with PHY-specific MIIF_* flags, a pointer to its PHY functions and the add_media set to one. All PHY drivers were updated to take advantage of mii_phy_dev_attach() as appropriate. Along with these changes the capability mask was added to the mii_softc structure so PHY drivers taking advantage of mii_phy_dev_attach() but still handling media on their own do not need to fiddle with the MII attach arguments anyway. - Keep track of the PHY offset in the mii_softc structure. This is done for compatibility with NetBSD/OpenBSD. - Keep track of the PHY's OUI, model and revision in the mii_softc structure. Several PHY drivers require this information also after attaching and previously had to wrap their own softc around mii_softc. NetBSD/OpenBSD also keep track of the model and revision on their mii_softc structure. All PHY drivers were updated to take advantage as appropriate. - Convert the mebers of the MII data structure to unsigned where appropriate. This is partly inspired by NetBSD/OpenBSD. - According to IEEE 802.3-2002 the bits actually have to be reversed when mapping an OUI to the MII ID registers. All PHY drivers and miidevs where changed as necessary. Actually this now again allows to largely share miidevs with NetBSD, which fixed this problem already 9 years ago. Consequently miidevs was synced as far as possible. - Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that weren't explicitly converted to support flow control before. It's unclear whether flow control actually works with these but typically it should and their net behavior should be more correct with these changes in place than without if the MAC driver sets MIIF_DOPAUSE. Obtained from: NetBSD (partially) Reviewed by: yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
struct mii_softc *miisc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = ifp->if_softc;
mii = device_get_softc(sc->sc_miibus);
- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP (reporting IFM_LOOP based on BMCR_LOOP is left in place though as it might provide useful for debugging). For most mii(4) drivers it was unclear whether the PHYs driven by them actually support loopback or not. Moreover, typically loopback mode also needs to be activated on the MAC, which none of the Ethernet drivers using mii(4) implements. Given that loopback media has no real use (and obviously hardly had a chance to actually work) besides for driver development (which just loopback mode should be sufficient for though, i.e one doesn't necessary need support for loopback media) support for it is just dropped as both NetBSD and OpenBSD already did quite some time ago. - Let mii_phy_add_media() also announce the support of IFM_NONE. - Restructure the PHY entry points to use a structure of entry points instead of discrete function pointers, and extend this to include a "reset" entry point. Make sure any PHY-specific reset routine is always used, and provide one for lxtphy(4) which disables MII interrupts (as is done for a few other PHYs we have drivers for). This includes changing NIC drivers which previously just called the generic mii_phy_reset() to now actually call the PHY-specific reset routine, which might be crucial in some cases. While at it, the redundant checks in these NIC drivers for mii->mii_instance not being zero before calling the reset routines were removed because as soon as one PHY driver attaches mii->mii_instance is incremented and we hardly can end up in their media change callbacks etc if no PHY driver has attached as mii_attach() would have failed in that case and not attach a miibus(4) instance. Consequently, NIC drivers now no longer should call mii_phy_reset() directly, so it was removed from EXPORT_SYMS. - Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe(). The purpose of that function is to perform the common steps to attach a PHY driver instance and to hook it up to the miibus(4) instance and to optionally also handle the probing, addition and initialization of the supported media. So all a PHY driver without any special requirements has to do in its bus attach method is to call mii_phy_dev_attach() along with PHY-specific MIIF_* flags, a pointer to its PHY functions and the add_media set to one. All PHY drivers were updated to take advantage of mii_phy_dev_attach() as appropriate. Along with these changes the capability mask was added to the mii_softc structure so PHY drivers taking advantage of mii_phy_dev_attach() but still handling media on their own do not need to fiddle with the MII attach arguments anyway. - Keep track of the PHY offset in the mii_softc structure. This is done for compatibility with NetBSD/OpenBSD. - Keep track of the PHY's OUI, model and revision in the mii_softc structure. Several PHY drivers require this information also after attaching and previously had to wrap their own softc around mii_softc. NetBSD/OpenBSD also keep track of the model and revision on their mii_softc structure. All PHY drivers were updated to take advantage as appropriate. - Convert the mebers of the MII data structure to unsigned where appropriate. This is partly inspired by NetBSD/OpenBSD. - According to IEEE 802.3-2002 the bits actually have to be reversed when mapping an OUI to the MII ID registers. All PHY drivers and miidevs where changed as necessary. Actually this now again allows to largely share miidevs with NetBSD, which fixed this problem already 9 years ago. Consequently miidevs was synced as far as possible. - Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that weren't explicitly converted to support flow control before. It's unclear whether flow control actually works with these but typically it should and their net behavior should be more correct with these changes in place than without if the MAC driver sets MIIF_DOPAUSE. Obtained from: NetBSD (partially) Reviewed by: yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
PHY_RESET(miisc);
Make sure to report media change status to caller. Previously it always reported success.
2011-10-17 20:03:38 +00:00
return (mii_mediachg(mii));
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_ifmedia_upd(struct ifnet *ifp)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
int res;
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = ifp->if_softc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK(sc);
res = et_ifmedia_upd_locked(ifp);
ET_UNLOCK(sc);
style(9)
2009-11-19 21:53:21 +00:00
return (res);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
struct et_softc *sc;
struct mii_data *mii;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
sc = ifp->if_softc;
Add missing driver lock in media status handler.
2011-10-17 19:58:34 +00:00
ET_LOCK(sc);
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
if ((ifp->if_flags & IFF_UP) == 0) {
ET_UNLOCK(sc);
return;
}
mii = device_get_softc(sc->sc_miibus);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
Add missing driver lock in media status handler.
2011-10-17 19:58:34 +00:00
ET_UNLOCK(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_stop(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct ifnet *ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK_ASSERT(sc);
style. No functional changes.
2012-01-10 20:52:02 +00:00
ifp = sc->ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
callout_stop(&sc->sc_tick);
Remove et_enable_intrs(), et_disable_intrs() functions and manipulation of interrupt register access is done through CSR_WRITE_4 macro. Also add disabling interrupt into et_reset() because we want interrupt disabled state after controller reset. While I'm here slightly change interrupt handler to be more readable one.
2011-12-07 19:43:04 +00:00
/* Disable interrupts. */
CSR_WRITE_4(sc, ET_INTR_MASK, 0xffffffff);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
CSR_WRITE_4(sc, ET_MAC_CFG1, CSR_READ_4(sc, ET_MAC_CFG1) & ~(
ET_MAC_CFG1_TXEN | ET_MAC_CFG1_RXEN));
DELAY(100);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_stop_rxdma(sc);
et_stop_txdma(sc);
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
et_stats_update(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_free_tx_ring(sc);
et_free_rx_ring(sc);
sc->sc_tx = 0;
sc->sc_tx_intr = 0;
sc->sc_flags &= ~ET_FLAG_TXRX_ENABLED;
sc->watchdog_timer = 0;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
}
static int
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
et_bus_config(struct et_softc *sc)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
{
uint32_t val, max_plsz;
uint16_t ack_latency, replay_timer;
/*
* Test whether EEPROM is valid
* NOTE: Read twice to get the correct value
*/
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
pci_read_config(sc->dev, ET_PCIR_EEPROM_STATUS, 1);
val = pci_read_config(sc->dev, ET_PCIR_EEPROM_STATUS, 1);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (val & ET_PCIM_EEPROM_STATUS_ERROR) {
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
device_printf(sc->dev, "EEPROM status error 0x%02x\n", val);
style(9)
2009-11-19 21:53:21 +00:00
return (ENXIO);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
/* TODO: LED */
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
if ((sc->sc_flags & ET_FLAG_PCIE) == 0)
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/*
* Configure ACK latency and replay timer according to
* max playload size
*/
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
val = pci_read_config(sc->dev,
Align the PCI Express #defines with the style used for the PCI-X #defines. This also has the advantage that it makes the names more compact, iand also allows us to correct the non-uniform naming of the PCIM_LINK_* defines, making them all consistent amongst themselves. This is a mostly mechanical rename: s/PCIR_EXPRESS_/PCIER_/g s/PCIM_EXP_/PCIEM_/g s/PCIM_LINK_/PCIEM_LINK_/g When this is MFC'd, #defines will be added for the old names to assist out-of-tree drivers. Discussed with: jhb MFC after: 1 week
2012-09-18 22:04:59 +00:00
sc->sc_expcap + PCIER_DEVICE_CAP, 4);
max_plsz = val & PCIEM_CAP_MAX_PAYLOAD;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
switch (max_plsz) {
case ET_PCIV_DEVICE_CAPS_PLSZ_128:
ack_latency = ET_PCIV_ACK_LATENCY_128;
replay_timer = ET_PCIV_REPLAY_TIMER_128;
break;
case ET_PCIV_DEVICE_CAPS_PLSZ_256:
ack_latency = ET_PCIV_ACK_LATENCY_256;
replay_timer = ET_PCIV_REPLAY_TIMER_256;
break;
default:
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
ack_latency = pci_read_config(sc->dev, ET_PCIR_ACK_LATENCY, 2);
replay_timer = pci_read_config(sc->dev,
ET_PCIR_REPLAY_TIMER, 2);
device_printf(sc->dev, "ack latency %u, replay timer %u\n",
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ack_latency, replay_timer);
break;
}
if (ack_latency != 0) {
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
pci_write_config(sc->dev, ET_PCIR_ACK_LATENCY, ack_latency, 2);
pci_write_config(sc->dev, ET_PCIR_REPLAY_TIMER, replay_timer,
2);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
/*
* Set L0s and L1 latency timer to 2us
*/
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
val = pci_read_config(sc->dev, ET_PCIR_L0S_L1_LATENCY, 4);
Align the PCI Express #defines with the style used for the PCI-X #defines. This also has the advantage that it makes the names more compact, iand also allows us to correct the non-uniform naming of the PCIM_LINK_* defines, making them all consistent amongst themselves. This is a mostly mechanical rename: s/PCIR_EXPRESS_/PCIER_/g s/PCIM_EXP_/PCIEM_/g s/PCIM_LINK_/PCIEM_LINK_/g When this is MFC'd, #defines will be added for the old names to assist out-of-tree drivers. Discussed with: jhb MFC after: 1 week
2012-09-18 22:04:59 +00:00
val &= ~(PCIEM_LINK_CAP_L0S_EXIT | PCIEM_LINK_CAP_L1_EXIT);
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
/* L0s exit latency : 2us */
val |= 0x00005000;
/* L1 exit latency : 2us */
val |= 0x00028000;
Use capability pointer to access PCIe registers rather than directly access them at fixed address. Frequently the register offset could be changed if additional PCI capabilities are added to controller. One odd thing is ET_PCIR_L0S_L1_LATENCY register. I think it's PCIe link capabilities register but the location of the register does not match with PCIe capability pointer + offset. I'm not sure it's shadow register of PCIe link capabilities register.
2009-11-19 22:53:41 +00:00
pci_write_config(sc->dev, ET_PCIR_L0S_L1_LATENCY, val, 4);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/*
* Set max read request size to 2048 bytes
*/
Remove unnecessary definition of ET_PCIR_BAR. Controller support I/O memory only. While here, use pci_set_max_read_req(9) rather than directly manipulating PCIe device control register.
2011-12-09 18:34:45 +00:00
pci_set_max_read_req(sc->dev, 2048);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_get_eaddr(device_t dev, uint8_t eaddr[])
{
uint32_t val;
int i;
val = pci_read_config(dev, ET_PCIR_MAC_ADDR0, 4);
for (i = 0; i < 4; ++i)
eaddr[i] = (val >> (8 * i)) & 0xff;
val = pci_read_config(dev, ET_PCIR_MAC_ADDR1, 2);
for (; i < ETHER_ADDR_LEN; ++i)
eaddr[i] = (val >> (8 * (i - 4))) & 0xff;
}
static void
et_reset(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_MAC_CFG1,
ET_MAC_CFG1_RST_TXFUNC | ET_MAC_CFG1_RST_RXFUNC |
ET_MAC_CFG1_RST_TXMC | ET_MAC_CFG1_RST_RXMC |
ET_MAC_CFG1_SIM_RST | ET_MAC_CFG1_SOFT_RST);
CSR_WRITE_4(sc, ET_SWRST,
ET_SWRST_TXDMA | ET_SWRST_RXDMA |
ET_SWRST_TXMAC | ET_SWRST_RXMAC |
ET_SWRST_MAC | ET_SWRST_MAC_STAT | ET_SWRST_MMC);
CSR_WRITE_4(sc, ET_MAC_CFG1,
ET_MAC_CFG1_RST_TXFUNC | ET_MAC_CFG1_RST_RXFUNC |
ET_MAC_CFG1_RST_TXMC | ET_MAC_CFG1_RST_RXMC);
CSR_WRITE_4(sc, ET_MAC_CFG1, 0);
Remove et_enable_intrs(), et_disable_intrs() functions and manipulation of interrupt register access is done through CSR_WRITE_4 macro. Also add disabling interrupt into et_reset() because we want interrupt disabled state after controller reset. While I'm here slightly change interrupt handler to be more readable one.
2011-12-07 19:43:04 +00:00
/* Disable interrupts. */
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_INTR_MASK, 0xffffffff);
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_dmamap_arg {
bus_addr_t et_busaddr;
};
static void
et_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
struct et_dmamap_arg *ctx;
if (error)
return;
KASSERT(nseg == 1, ("%s: %d segments returned!", __func__, nseg));
ctx = arg;
ctx->et_busaddr = segs->ds_addr;
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static int
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
et_dma_ring_alloc(struct et_softc *sc, bus_size_t alignment, bus_size_t maxsize,
bus_dma_tag_t *tag, uint8_t **ring, bus_dmamap_t *map, bus_addr_t *paddr,
const char *msg)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_dmamap_arg ctx;
int error;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
error = bus_dma_tag_create(sc->sc_dtag, alignment, 0, BUS_SPACE_MAXADDR,
BUS_SPACE_MAXADDR, NULL, NULL, maxsize, 1, maxsize, 0, NULL, NULL,
tag);
if (error != 0) {
device_printf(sc->dev, "could not create %s dma tag\n", msg);
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Allocate DMA'able memory for ring. */
error = bus_dmamem_alloc(*tag, (void **)ring,
BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, map);
if (error != 0) {
device_printf(sc->dev,
"could not allocate DMA'able memory for %s\n", msg);
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Load the address of the ring. */
ctx.et_busaddr = 0;
error = bus_dmamap_load(*tag, *map, *ring, maxsize, et_dma_map_addr,
&ctx, BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->dev,
"could not load DMA'able memory for %s\n", msg);
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
*paddr = ctx.et_busaddr;
return (0);
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static void
et_dma_ring_free(struct et_softc *sc, bus_dma_tag_t *tag, uint8_t **ring,
bus_dmamap_t *map)
{
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (*map != NULL)
bus_dmamap_unload(*tag, *map);
if (*map != NULL && *ring != NULL) {
bus_dmamem_free(*tag, *ring, *map);
*ring = NULL;
*map = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (*tag) {
bus_dma_tag_destroy(*tag);
*tag = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static int
et_dma_alloc(struct et_softc *sc)
{
struct et_txdesc_ring *tx_ring;
struct et_rxdesc_ring *rx_ring;
struct et_rxstat_ring *rxst_ring;
struct et_rxstatus_data *rxsd;
struct et_rxbuf_data *rbd;
struct et_txbuf_data *tbd;
struct et_txstatus_data *txsd;
int i, error;
error = bus_dma_tag_create(bus_get_dma_tag(sc->dev), 1, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL,
&sc->sc_dtag);
if (error != 0) {
device_printf(sc->dev, "could not allocate parent dma tag\n");
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* TX ring. */
tx_ring = &sc->sc_tx_ring;
error = et_dma_ring_alloc(sc, ET_RING_ALIGN, ET_TX_RING_SIZE,
&tx_ring->tr_dtag, (uint8_t **)&tx_ring->tr_desc, &tx_ring->tr_dmap,
&tx_ring->tr_paddr, "TX ring");
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error)
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* TX status block. */
txsd = &sc->sc_tx_status;
error = et_dma_ring_alloc(sc, ET_STATUS_ALIGN, sizeof(uint32_t),
&txsd->txsd_dtag, (uint8_t **)&txsd->txsd_status, &txsd->txsd_dmap,
&txsd->txsd_paddr, "TX status block");
if (error)
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* RX ring 0, used as to recive small sized frames. */
rx_ring = &sc->sc_rx_ring[0];
error = et_dma_ring_alloc(sc, ET_RING_ALIGN, ET_RX_RING_SIZE,
&rx_ring->rr_dtag, (uint8_t **)&rx_ring->rr_desc, &rx_ring->rr_dmap,
&rx_ring->rr_paddr, "RX ring 0");
rx_ring->rr_posreg = ET_RX_RING0_POS;
if (error)
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* RX ring 1, used as to store normal sized frames. */
rx_ring = &sc->sc_rx_ring[1];
error = et_dma_ring_alloc(sc, ET_RING_ALIGN, ET_RX_RING_SIZE,
&rx_ring->rr_dtag, (uint8_t **)&rx_ring->rr_desc, &rx_ring->rr_dmap,
&rx_ring->rr_paddr, "RX ring 1");
rx_ring->rr_posreg = ET_RX_RING1_POS;
if (error)
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* RX stat ring. */
rxst_ring = &sc->sc_rxstat_ring;
error = et_dma_ring_alloc(sc, ET_RING_ALIGN, ET_RXSTAT_RING_SIZE,
&rxst_ring->rsr_dtag, (uint8_t **)&rxst_ring->rsr_stat,
&rxst_ring->rsr_dmap, &rxst_ring->rsr_paddr, "RX stat ring");
if (error)
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* RX status block. */
rxsd = &sc->sc_rx_status;
error = et_dma_ring_alloc(sc, ET_STATUS_ALIGN,
sizeof(struct et_rxstatus), &rxsd->rxsd_dtag,
(uint8_t **)&rxsd->rxsd_status, &rxsd->rxsd_dmap,
&rxsd->rxsd_paddr, "RX status block");
if (error)
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Create parent DMA tag for mbufs. */
error = bus_dma_tag_create(bus_get_dma_tag(sc->dev), 1, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL,
&sc->sc_mbuf_dtag);
if (error != 0) {
device_printf(sc->dev,
"could not allocate parent dma tag for mbuf\n");
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Create DMA tag for mini RX mbufs to use RX ring 0. */
error = bus_dma_tag_create(sc->sc_mbuf_dtag, 1, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MHLEN, 1,
MHLEN, 0, NULL, NULL, &sc->sc_rx_mini_tag);
if (error) {
device_printf(sc->dev, "could not create mini RX dma tag\n");
return (error);
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Create DMA tag for standard RX mbufs to use RX ring 1. */
error = bus_dma_tag_create(sc->sc_mbuf_dtag, 1, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1,
MCLBYTES, 0, NULL, NULL, &sc->sc_rx_tag);
if (error) {
device_printf(sc->dev, "could not create RX dma tag\n");
return (error);
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Create DMA tag for TX mbufs. */
error = bus_dma_tag_create(sc->sc_mbuf_dtag, 1, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
MCLBYTES * ET_NSEG_MAX, ET_NSEG_MAX, MCLBYTES, 0, NULL, NULL,
&sc->sc_tx_tag);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
device_printf(sc->dev, "could not create TX dma tag\n");
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Initialize RX ring 0. */
rbd = &sc->sc_rx_data[0];
rbd->rbd_bufsize = ET_RXDMA_CTRL_RING0_128;
rbd->rbd_newbuf = et_newbuf_hdr;
rbd->rbd_discard = et_rxbuf_discard;
rbd->rbd_softc = sc;
rbd->rbd_ring = &sc->sc_rx_ring[0];
/* Create DMA maps for mini RX buffers, ring 0. */
for (i = 0; i < ET_RX_NDESC; i++) {
error = bus_dmamap_create(sc->sc_rx_mini_tag, 0,
&rbd->rbd_buf[i].rb_dmap);
if (error) {
device_printf(sc->dev,
"could not create DMA map for mini RX mbufs\n");
return (error);
}
}
/* Create a spare DMA map for mini RX buffers, ring 0. */
error = bus_dmamap_create(sc->sc_rx_mini_tag, 0,
&sc->sc_rx_mini_sparemap);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
device_printf(sc->dev,
"could not create spare DMA map for mini RX mbuf\n");
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Initialize RX ring 1. */
rbd = &sc->sc_rx_data[1];
rbd->rbd_bufsize = ET_RXDMA_CTRL_RING1_2048;
rbd->rbd_newbuf = et_newbuf_cluster;
rbd->rbd_discard = et_rxbuf_discard;
rbd->rbd_softc = sc;
rbd->rbd_ring = &sc->sc_rx_ring[1];
/* Create DMA maps for standard RX buffers, ring 1. */
for (i = 0; i < ET_RX_NDESC; i++) {
error = bus_dmamap_create(sc->sc_rx_tag, 0,
&rbd->rbd_buf[i].rb_dmap);
if (error) {
device_printf(sc->dev,
"could not create DMA map for mini RX mbufs\n");
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Create a spare DMA map for standard RX buffers, ring 1. */
error = bus_dmamap_create(sc->sc_rx_tag, 0, &sc->sc_rx_sparemap);
if (error) {
device_printf(sc->dev,
"could not create spare DMA map for RX mbuf\n");
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Create DMA maps for TX buffers. */
tbd = &sc->sc_tx_data;
for (i = 0; i < ET_TX_NDESC; i++) {
error = bus_dmamap_create(sc->sc_tx_tag, 0,
&tbd->tbd_buf[i].tb_dmap);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
device_printf(sc->dev,
"could not create DMA map for TX mbufs\n");
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
}
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
et_dma_free(struct et_softc *sc)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_txdesc_ring *tx_ring;
struct et_rxdesc_ring *rx_ring;
struct et_txstatus_data *txsd;
struct et_rxstat_ring *rxst_ring;
struct et_rxstatus_data *rxsd;
struct et_rxbuf_data *rbd;
struct et_txbuf_data *tbd;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
int i;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Destroy DMA maps for mini RX buffers, ring 0. */
rbd = &sc->sc_rx_data[0];
for (i = 0; i < ET_RX_NDESC; i++) {
if (rbd->rbd_buf[i].rb_dmap) {
bus_dmamap_destroy(sc->sc_rx_mini_tag,
rbd->rbd_buf[i].rb_dmap);
rbd->rbd_buf[i].rb_dmap = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (sc->sc_rx_mini_sparemap) {
bus_dmamap_destroy(sc->sc_rx_mini_tag, sc->sc_rx_mini_sparemap);
sc->sc_rx_mini_sparemap = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (sc->sc_rx_mini_tag) {
bus_dma_tag_destroy(sc->sc_rx_mini_tag);
sc->sc_rx_mini_tag = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Destroy DMA maps for standard RX buffers, ring 1. */
rbd = &sc->sc_rx_data[1];
for (i = 0; i < ET_RX_NDESC; i++) {
if (rbd->rbd_buf[i].rb_dmap) {
bus_dmamap_destroy(sc->sc_rx_tag,
rbd->rbd_buf[i].rb_dmap);
rbd->rbd_buf[i].rb_dmap = NULL;
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (sc->sc_rx_sparemap) {
bus_dmamap_destroy(sc->sc_rx_tag, sc->sc_rx_sparemap);
sc->sc_rx_sparemap = NULL;
}
if (sc->sc_rx_tag) {
bus_dma_tag_destroy(sc->sc_rx_tag);
sc->sc_rx_tag = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Destroy DMA maps for TX buffers. */
tbd = &sc->sc_tx_data;
for (i = 0; i < ET_TX_NDESC; i++) {
if (tbd->tbd_buf[i].tb_dmap) {
bus_dmamap_destroy(sc->sc_tx_tag,
tbd->tbd_buf[i].tb_dmap);
tbd->tbd_buf[i].tb_dmap = NULL;
}
}
if (sc->sc_tx_tag) {
bus_dma_tag_destroy(sc->sc_tx_tag);
sc->sc_tx_tag = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Destroy mini RX ring, ring 0. */
rx_ring = &sc->sc_rx_ring[0];
et_dma_ring_free(sc, &rx_ring->rr_dtag, (void *)&rx_ring->rr_desc,
&rx_ring->rr_dmap);
/* Destroy standard RX ring, ring 1. */
rx_ring = &sc->sc_rx_ring[1];
et_dma_ring_free(sc, &rx_ring->rr_dtag, (void *)&rx_ring->rr_desc,
&rx_ring->rr_dmap);
/* Destroy RX stat ring. */
rxst_ring = &sc->sc_rxstat_ring;
et_dma_ring_free(sc, &rxst_ring->rsr_dtag, (void *)&rxst_ring->rsr_stat,
&rxst_ring->rsr_dmap);
/* Destroy RX status block. */
rxsd = &sc->sc_rx_status;
et_dma_ring_free(sc, &rxst_ring->rsr_dtag, (void *)&rxst_ring->rsr_stat,
&rxst_ring->rsr_dmap);
/* Destroy TX ring. */
tx_ring = &sc->sc_tx_ring;
et_dma_ring_free(sc, &tx_ring->tr_dtag, (void *)&tx_ring->tr_desc,
&tx_ring->tr_dmap);
/* Destroy TX status block. */
txsd = &sc->sc_tx_status;
et_dma_ring_free(sc, &txsd->txsd_dtag, (void *)&txsd->txsd_status,
&txsd->txsd_dmap);
/* Destroy the parent tag. */
if (sc->sc_dtag) {
bus_dma_tag_destroy(sc->sc_dtag);
sc->sc_dtag = NULL;
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_chip_attach(struct et_softc *sc)
{
uint32_t val;
/*
* Perform minimal initialization
*/
/* Disable loopback */
CSR_WRITE_4(sc, ET_LOOPBACK, 0);
/* Reset MAC */
CSR_WRITE_4(sc, ET_MAC_CFG1,
ET_MAC_CFG1_RST_TXFUNC | ET_MAC_CFG1_RST_RXFUNC |
ET_MAC_CFG1_RST_TXMC | ET_MAC_CFG1_RST_RXMC |
ET_MAC_CFG1_SIM_RST | ET_MAC_CFG1_SOFT_RST);
/*
* Setup half duplex mode
*/
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val = (10 << ET_MAC_HDX_ALT_BEB_TRUNC_SHIFT) |
(15 << ET_MAC_HDX_REXMIT_MAX_SHIFT) |
(55 << ET_MAC_HDX_COLLWIN_SHIFT) |
ET_MAC_HDX_EXC_DEFER;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_MAC_HDX, val);
/* Clear MAC control */
CSR_WRITE_4(sc, ET_MAC_CTRL, 0);
/* Reset MII */
CSR_WRITE_4(sc, ET_MII_CFG, ET_MII_CFG_CLKRST);
/* Bring MAC out of reset state */
CSR_WRITE_4(sc, ET_MAC_CFG1, 0);
/* Enable memory controllers */
CSR_WRITE_4(sc, ET_MMC_CTRL, ET_MMC_CTRL_ENABLE);
}
static void
et_intr(void *xsc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
struct ifnet *ifp;
Do not disable interrupt without knowing whether the raised interrupt is ours. Note, interrupts are automatically ACKed when the status register is read. Add RX/TX DMA error to interrupt handler and do full controller reset if driver happen to encounter these errors. There is no way to recover from these DMA errors without controller reset. Rename local variable name intrs with status to enhance readability. While I'm here, rename ET_INTR_TXEOF and ET_INTR_RXEOF to ET_INTR_TXDMA and ET_INTR_RXDMA respectively. These interrupts indicate that a frame is successfully DMAed to controller's internal FIFO and they have nothing to do with EOF(end of frame). Driver does not need to wait actual end of TX/RX of a frame(e.g. no need to wait the end signal of TX which is generated when a frame in TX FIFO is emptied by MAC). Previous names were somewhat confusing.
2011-12-09 18:17:02 +00:00
uint32_t status;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = xsc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK(sc);
ifp = sc->ifp;
Do not disable interrupt without knowing whether the raised interrupt is ours. Note, interrupts are automatically ACKed when the status register is read. Add RX/TX DMA error to interrupt handler and do full controller reset if driver happen to encounter these errors. There is no way to recover from these DMA errors without controller reset. Rename local variable name intrs with status to enhance readability. While I'm here, rename ET_INTR_TXEOF and ET_INTR_RXEOF to ET_INTR_TXDMA and ET_INTR_RXDMA respectively. These interrupts indicate that a frame is successfully DMAed to controller's internal FIFO and they have nothing to do with EOF(end of frame). Driver does not need to wait actual end of TX/RX of a frame(e.g. no need to wait the end signal of TX which is generated when a frame in TX FIFO is emptied by MAC). Previous names were somewhat confusing.
2011-12-09 18:17:02 +00:00
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
goto done;
status = CSR_READ_4(sc, ET_INTR_STATUS);
if ((status & ET_INTRS) == 0)
goto done;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Remove et_enable_intrs(), et_disable_intrs() functions and manipulation of interrupt register access is done through CSR_WRITE_4 macro. Also add disabling interrupt into et_reset() because we want interrupt disabled state after controller reset. While I'm here slightly change interrupt handler to be more readable one.
2011-12-07 19:43:04 +00:00
/* Disable further interrupts. */
CSR_WRITE_4(sc, ET_INTR_MASK, 0xffffffff);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Do not disable interrupt without knowing whether the raised interrupt is ours. Note, interrupts are automatically ACKed when the status register is read. Add RX/TX DMA error to interrupt handler and do full controller reset if driver happen to encounter these errors. There is no way to recover from these DMA errors without controller reset. Rename local variable name intrs with status to enhance readability. While I'm here, rename ET_INTR_TXEOF and ET_INTR_RXEOF to ET_INTR_TXDMA and ET_INTR_RXDMA respectively. These interrupts indicate that a frame is successfully DMAed to controller's internal FIFO and they have nothing to do with EOF(end of frame). Driver does not need to wait actual end of TX/RX of a frame(e.g. no need to wait the end signal of TX which is generated when a frame in TX FIFO is emptied by MAC). Previous names were somewhat confusing.
2011-12-09 18:17:02 +00:00
if (status & (ET_INTR_RXDMA_ERROR | ET_INTR_TXDMA_ERROR)) {
device_printf(sc->dev, "DMA error(0x%08x) -- resetting\n",
status);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
et_init_locked(sc);
ET_UNLOCK(sc);
return;
}
if (status & ET_INTR_RXDMA)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_rxeof(sc);
Do not disable interrupt without knowing whether the raised interrupt is ours. Note, interrupts are automatically ACKed when the status register is read. Add RX/TX DMA error to interrupt handler and do full controller reset if driver happen to encounter these errors. There is no way to recover from these DMA errors without controller reset. Rename local variable name intrs with status to enhance readability. While I'm here, rename ET_INTR_TXEOF and ET_INTR_RXEOF to ET_INTR_TXDMA and ET_INTR_RXDMA respectively. These interrupts indicate that a frame is successfully DMAed to controller's internal FIFO and they have nothing to do with EOF(end of frame). Driver does not need to wait actual end of TX/RX of a frame(e.g. no need to wait the end signal of TX which is generated when a frame in TX FIFO is emptied by MAC). Previous names were somewhat confusing.
2011-12-09 18:17:02 +00:00
if (status & (ET_INTR_TXDMA | ET_INTR_TIMER))
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_txeof(sc);
Do not disable interrupt without knowing whether the raised interrupt is ours. Note, interrupts are automatically ACKed when the status register is read. Add RX/TX DMA error to interrupt handler and do full controller reset if driver happen to encounter these errors. There is no way to recover from these DMA errors without controller reset. Rename local variable name intrs with status to enhance readability. While I'm here, rename ET_INTR_TXEOF and ET_INTR_RXEOF to ET_INTR_TXDMA and ET_INTR_RXDMA respectively. These interrupts indicate that a frame is successfully DMAed to controller's internal FIFO and they have nothing to do with EOF(end of frame). Driver does not need to wait actual end of TX/RX of a frame(e.g. no need to wait the end signal of TX which is generated when a frame in TX FIFO is emptied by MAC). Previous names were somewhat confusing.
2011-12-09 18:17:02 +00:00
if (status & ET_INTR_TIMER)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_TIMER, sc->sc_timer);
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
Remove et_enable_intrs(), et_disable_intrs() functions and manipulation of interrupt register access is done through CSR_WRITE_4 macro. Also add disabling interrupt into et_reset() because we want interrupt disabled state after controller reset. While I'm here slightly change interrupt handler to be more readable one.
2011-12-07 19:43:04 +00:00
CSR_WRITE_4(sc, ET_INTR_MASK, ~ET_INTRS);
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
et_start_locked(ifp);
}
Do not disable interrupt without knowing whether the raised interrupt is ours. Note, interrupts are automatically ACKed when the status register is read. Add RX/TX DMA error to interrupt handler and do full controller reset if driver happen to encounter these errors. There is no way to recover from these DMA errors without controller reset. Rename local variable name intrs with status to enhance readability. While I'm here, rename ET_INTR_TXEOF and ET_INTR_RXEOF to ET_INTR_TXDMA and ET_INTR_RXDMA respectively. These interrupts indicate that a frame is successfully DMAed to controller's internal FIFO and they have nothing to do with EOF(end of frame). Driver does not need to wait actual end of TX/RX of a frame(e.g. no need to wait the end signal of TX which is generated when a frame in TX FIFO is emptied by MAC). Previous names were somewhat confusing.
2011-12-09 18:17:02 +00:00
done:
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_UNLOCK(sc);
}
static void
et_init_locked(struct et_softc *sc)
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct ifnet *ifp;
int error;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK_ASSERT(sc);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
ifp = sc->ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
return;
et_stop(sc);
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
et_reset(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
et_init_tx_ring(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
error = et_init_rx_ring(sc);
if (error)
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
return;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
error = et_chip_init(sc);
if (error)
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
goto fail;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
/*
* Start TX/RX DMA engine
*/
error = et_start_rxdma(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error)
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
return;
error = et_start_txdma(sc);
if (error)
return;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Remove et_enable_intrs(), et_disable_intrs() functions and manipulation of interrupt register access is done through CSR_WRITE_4 macro. Also add disabling interrupt into et_reset() because we want interrupt disabled state after controller reset. While I'm here slightly change interrupt handler to be more readable one.
2011-12-07 19:43:04 +00:00
/* Enable interrupts. */
CSR_WRITE_4(sc, ET_INTR_MASK, ~ET_INTRS);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_TIMER, sc->sc_timer);
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
sc->sc_flags &= ~ET_FLAG_LINK;
et_ifmedia_upd_locked(ifp);
callout_reset(&sc->sc_tick, hz, et_tick, sc);
fail:
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error)
et_stop(sc);
}
static void
et_init(void *xsc)
{
struct et_softc *sc = xsc;
ET_LOCK(sc);
et_init_locked(sc);
ET_UNLOCK(sc);
}
static int
et_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
struct mii_data *mii;
struct ifreq *ifr;
int error, mask, max_framelen;
sc = ifp->if_softc;
ifr = (struct ifreq *)data;
error = 0;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/* XXX LOCKSUSED */
switch (cmd) {
case SIOCSIFFLAGS:
ET_LOCK(sc);
if (ifp->if_flags & IFF_UP) {
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
if ((ifp->if_flags ^ sc->sc_if_flags) &
(IFF_ALLMULTI | IFF_PROMISC | IFF_BROADCAST))
et_setmulti(sc);
} else {
et_init_locked(sc);
}
} else {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
et_stop(sc);
}
sc->sc_if_flags = ifp->if_flags;
ET_UNLOCK(sc);
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
style. No functional changes.
2012-01-10 20:52:02 +00:00
mii = device_get_softc(sc->sc_miibus);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
ET_LOCK(sc);
et_setmulti(sc);
ET_UNLOCK(sc);
}
break;
case SIOCSIFMTU:
Protect SIOCSIFMTU ioctl handler with driver lock. Don't blindly re-initialize controller whenever MTU is changed. Now, reinitializing is done only when driver is running. While here, remove unnecessary assignment of error value since it was already initialized to 0.
2011-12-07 21:54:44 +00:00
ET_LOCK(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
#if 0
if (sc->sc_flags & ET_FLAG_JUMBO)
max_framelen = ET_JUMBO_FRAMELEN;
else
#endif
max_framelen = MCLBYTES - 1;
if (ET_FRAMELEN(ifr->ifr_mtu) > max_framelen) {
error = EOPNOTSUPP;
Protect SIOCSIFMTU ioctl handler with driver lock. Don't blindly re-initialize controller whenever MTU is changed. Now, reinitializing is done only when driver is running. While here, remove unnecessary assignment of error value since it was already initialized to 0.
2011-12-07 21:54:44 +00:00
ET_UNLOCK(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
break;
}
if (ifp->if_mtu != ifr->ifr_mtu) {
ifp->if_mtu = ifr->ifr_mtu;
Protect SIOCSIFMTU ioctl handler with driver lock. Don't blindly re-initialize controller whenever MTU is changed. Now, reinitializing is done only when driver is running. While here, remove unnecessary assignment of error value since it was already initialized to 0.
2011-12-07 21:54:44 +00:00
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
et_init_locked(sc);
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Protect SIOCSIFMTU ioctl handler with driver lock. Don't blindly re-initialize controller whenever MTU is changed. Now, reinitializing is done only when driver is running. While here, remove unnecessary assignment of error value since it was already initialized to 0.
2011-12-07 21:54:44 +00:00
ET_UNLOCK(sc);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
break;
Add IPv4/TCP/UDP Tx checksum offloading support. It seems the controller also has support for IP/TCP checksum offloading for Rx path. But I failed to find to way to enable Rx MAC to compute the checksum of received frames.
2009-11-20 20:33:59 +00:00
case SIOCSIFCAP:
ET_LOCK(sc);
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
if ((mask & IFCAP_TXCSUM) != 0 &&
(IFCAP_TXCSUM & ifp->if_capabilities) != 0) {
ifp->if_capenable ^= IFCAP_TXCSUM;
if ((IFCAP_TXCSUM & ifp->if_capenable) != 0)
ifp->if_hwassist |= ET_CSUM_FEATURES;
else
ifp->if_hwassist &= ~ET_CSUM_FEATURES;
}
ET_UNLOCK(sc);
break;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
default:
error = ether_ioctl(ifp, cmd, data);
break;
}
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_start_locked(struct ifnet *ifp)
{
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
struct et_softc *sc;
struct mbuf *m_head = NULL;
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
struct et_txdesc_ring *tx_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
struct et_txbuf_data *tbd;
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
uint32_t tx_ready_pos;
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
int enq;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
sc = ifp->if_softc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK_ASSERT(sc);
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING ||
(sc->sc_flags & (ET_FLAG_LINK | ET_FLAG_TXRX_ENABLED)) !=
(ET_FLAG_LINK | ET_FLAG_TXRX_ENABLED))
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
return;
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
/*
* Driver does not request TX completion interrupt for every
* queued frames to prevent generating excessive interrupts.
* This means driver may wait for TX completion interrupt even
* though some frames were sucessfully transmitted. Reclaiming
* transmitted frames will ensure driver see all available
* descriptors.
*/
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
tbd = &sc->sc_tx_data;
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
if (tbd->tbd_used > (ET_TX_NDESC * 2) / 3)
et_txeof(sc);
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd); ) {
if (tbd->tbd_used + ET_NSEG_SPARE >= ET_TX_NDESC) {
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
break;
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
if (et_encap(sc, &m_head)) {
if (m_head == NULL) {
ifp->if_oerrors++;
break;
}
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
if (tbd->tbd_used > 0)
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
break;
}
Fix alt(4) support. Also add check for number of available TX descriptors before trying to send frames. If we're not able to send a frame, make sure to prepend it to if_snd queue such that alt(4) should work. While I'm here prefer ETHER_BPF_MTAP to BPF_MTAP. ETHER_BPF_MTAP should be used for controllers that support VLAN hardware tag insertion. The controller supports VLAN tag insertion but lacks VLAN tag stripping in RX path though.
2011-12-05 22:55:52 +00:00
enq++;
ETHER_BPF_MTAP(ifp, m_head);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
if (enq > 0) {
tx_ring = &sc->sc_tx_ring;
bus_dmamap_sync(tx_ring->tr_dtag, tx_ring->tr_dmap,
BUS_DMASYNC_PREWRITE);
tx_ready_pos = tx_ring->tr_ready_index &
ET_TX_READY_POS_INDEX_MASK;
if (tx_ring->tr_ready_wrap)
tx_ready_pos |= ET_TX_READY_POS_WRAP;
CSR_WRITE_4(sc, ET_TX_READY_POS, tx_ready_pos);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
sc->watchdog_timer = 5;
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_start(struct ifnet *ifp)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = ifp->if_softc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK(sc);
et_start_locked(ifp);
ET_UNLOCK(sc);
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static int
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_watchdog(struct et_softc *sc)
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
uint32_t status;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK_ASSERT(sc);
if (sc->watchdog_timer == 0 || --sc->watchdog_timer)
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
bus_dmamap_sync(sc->sc_tx_status.txsd_dtag, sc->sc_tx_status.txsd_dmap,
BUS_DMASYNC_POSTREAD);
status = le32toh(*(sc->sc_tx_status.txsd_status));
if_printf(sc->ifp, "watchdog timed out (0x%08x) -- resetting\n",
status);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Make sure to clear IFF_DRV_RUNNING to reinitialize controller. While I'm here update if_oerrors counter when driver encounters watchdog timeout.
2010-09-21 17:31:14 +00:00
sc->ifp->if_oerrors++;
sc->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_init_locked(sc);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
return (EJUSTRETURN);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_stop_rxdma(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_RXDMA_CTRL,
ET_RXDMA_CTRL_HALT | ET_RXDMA_CTRL_RING1_ENABLE);
DELAY(5);
if ((CSR_READ_4(sc, ET_RXDMA_CTRL) & ET_RXDMA_CTRL_HALTED) == 0) {
if_printf(sc->ifp, "can't stop RX DMA engine\n");
style(9)
2009-11-19 21:53:21 +00:00
return (ETIMEDOUT);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_stop_txdma(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_TXDMA_CTRL,
ET_TXDMA_CTRL_HALT | ET_TXDMA_CTRL_SINGLE_EPKT);
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_free_tx_ring(struct et_softc *sc)
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_txdesc_ring *tx_ring;
struct et_txbuf_data *tbd;
struct et_txbuf *tb;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
int i;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
tbd = &sc->sc_tx_data;
tx_ring = &sc->sc_tx_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
for (i = 0; i < ET_TX_NDESC; ++i) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
tb = &tbd->tbd_buf[i];
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (tb->tb_mbuf != NULL) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
bus_dmamap_sync(sc->sc_tx_tag, tb->tb_dmap,
BUS_DMASYNC_POSTWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bus_dmamap_unload(sc->sc_mbuf_dtag, tb->tb_dmap);
m_freem(tb->tb_mbuf);
tb->tb_mbuf = NULL;
}
}
}
static void
et_free_rx_ring(struct et_softc *sc)
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_rxbuf_data *rbd;
struct et_rxdesc_ring *rx_ring;
struct et_rxbuf *rb;
int i;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Ring 0 */
rx_ring = &sc->sc_rx_ring[0];
rbd = &sc->sc_rx_data[0];
for (i = 0; i < ET_RX_NDESC; ++i) {
rb = &rbd->rbd_buf[i];
if (rb->rb_mbuf != NULL) {
bus_dmamap_sync(sc->sc_rx_mini_tag, rx_ring->rr_dmap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_rx_mini_tag, rb->rb_dmap);
m_freem(rb->rb_mbuf);
rb->rb_mbuf = NULL;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Ring 1 */
rx_ring = &sc->sc_rx_ring[1];
rbd = &sc->sc_rx_data[1];
for (i = 0; i < ET_RX_NDESC; ++i) {
rb = &rbd->rbd_buf[i];
if (rb->rb_mbuf != NULL) {
bus_dmamap_sync(sc->sc_rx_tag, rx_ring->rr_dmap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_rx_tag, rb->rb_dmap);
m_freem(rb->rb_mbuf);
rb->rb_mbuf = NULL;
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
}
static void
et_setmulti(struct et_softc *sc)
{
struct ifnet *ifp;
uint32_t hash[4] = { 0, 0, 0, 0 };
uint32_t rxmac_ctrl, pktfilt;
struct ifmultiaddr *ifma;
int i, count;
ET_LOCK_ASSERT(sc);
ifp = sc->ifp;
pktfilt = CSR_READ_4(sc, ET_PKTFILT);
rxmac_ctrl = CSR_READ_4(sc, ET_RXMAC_CTRL);
pktfilt &= ~(ET_PKTFILT_BCAST | ET_PKTFILT_MCAST | ET_PKTFILT_UCAST);
if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) {
rxmac_ctrl |= ET_RXMAC_CTRL_NO_PKTFILT;
goto back;
}
count = 0;
Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/ IF_ADDR_UNLOCK() across network device drivers when accessing the per-interface multicast address list, if_multiaddrs. This will allow us to change the locking strategy without affecting our driver programming interface or binary interface. For two wireless drivers, remove unnecessary locking, since they don't actually access the multicast address list. Approved by: re (kib) MFC after: 6 weeks
2009-06-26 11:45:06 +00:00
if_maddr_rlock(ifp);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
uint32_t *hp, h;
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
ifma->ifma_addr), ETHER_ADDR_LEN);
h = (h & 0x3f800000) >> 23;
hp = &hash[0];
if (h >= 32 && h < 64) {
h -= 32;
hp = &hash[1];
} else if (h >= 64 && h < 96) {
h -= 64;
hp = &hash[2];
} else if (h >= 96) {
h -= 96;
hp = &hash[3];
}
*hp |= (1 << h);
++count;
}
Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/ IF_ADDR_UNLOCK() across network device drivers when accessing the per-interface multicast address list, if_multiaddrs. This will allow us to change the locking strategy without affecting our driver programming interface or binary interface. For two wireless drivers, remove unnecessary locking, since they don't actually access the multicast address list. Approved by: re (kib) MFC after: 6 weeks
2009-06-26 11:45:06 +00:00
if_maddr_runlock(ifp);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
for (i = 0; i < 4; ++i)
CSR_WRITE_4(sc, ET_MULTI_HASH + (i * 4), hash[i]);
if (count > 0)
pktfilt |= ET_PKTFILT_MCAST;
rxmac_ctrl &= ~ET_RXMAC_CTRL_NO_PKTFILT;
back:
CSR_WRITE_4(sc, ET_PKTFILT, pktfilt);
CSR_WRITE_4(sc, ET_RXMAC_CTRL, rxmac_ctrl);
}
static int
et_chip_init(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct ifnet *ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
uint32_t rxq_end;
int error, frame_len, rxmem_size;
style. No functional changes.
2012-01-10 20:52:02 +00:00
ifp = sc->ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/*
* Split 16Kbytes internal memory between TX and RX
* according to frame length.
*/
frame_len = ET_FRAMELEN(ifp->if_mtu);
if (frame_len < 2048) {
rxmem_size = ET_MEM_RXSIZE_DEFAULT;
} else if (frame_len <= ET_RXMAC_CUT_THRU_FRMLEN) {
rxmem_size = ET_MEM_SIZE / 2;
} else {
rxmem_size = ET_MEM_SIZE -
roundup(frame_len + ET_MEM_TXSIZE_EX, ET_MEM_UNIT);
}
rxq_end = ET_QUEUE_ADDR(rxmem_size);
CSR_WRITE_4(sc, ET_RXQUEUE_START, ET_QUEUE_ADDR_START);
CSR_WRITE_4(sc, ET_RXQUEUE_END, rxq_end);
CSR_WRITE_4(sc, ET_TXQUEUE_START, rxq_end + 1);
CSR_WRITE_4(sc, ET_TXQUEUE_END, ET_QUEUE_ADDR_END);
/* No loopback */
CSR_WRITE_4(sc, ET_LOOPBACK, 0);
/* Clear MSI configure */
Add MSI support.
2009-11-19 21:45:06 +00:00
if ((sc->sc_flags & ET_FLAG_MSI) == 0)
CSR_WRITE_4(sc, ET_MSI_CFG, 0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/* Disable timer */
CSR_WRITE_4(sc, ET_TIMER, 0);
/* Initialize MAC */
et_init_mac(sc);
/* Enable memory controllers */
CSR_WRITE_4(sc, ET_MMC_CTRL, ET_MMC_CTRL_ENABLE);
/* Initialize RX MAC */
et_init_rxmac(sc);
/* Initialize TX MAC */
et_init_txmac(sc);
/* Initialize RX DMA engine */
error = et_init_rxdma(sc);
if (error)
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/* Initialize TX DMA engine */
error = et_init_txdma(sc);
if (error)
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static void
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
et_init_tx_ring(struct et_softc *sc)
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_txdesc_ring *tx_ring;
struct et_txbuf_data *tbd;
struct et_txstatus_data *txsd;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
tx_ring = &sc->sc_tx_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bzero(tx_ring->tr_desc, ET_TX_RING_SIZE);
bus_dmamap_sync(tx_ring->tr_dtag, tx_ring->tr_dmap,
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
BUS_DMASYNC_PREWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
tbd = &sc->sc_tx_data;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
tbd->tbd_start_index = 0;
tbd->tbd_start_wrap = 0;
tbd->tbd_used = 0;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
txsd = &sc->sc_tx_status;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bzero(txsd->txsd_status, sizeof(uint32_t));
bus_dmamap_sync(txsd->txsd_dtag, txsd->txsd_dmap,
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_init_rx_ring(struct et_softc *sc)
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_rxstatus_data *rxsd;
struct et_rxstat_ring *rxst_ring;
struct et_rxbuf_data *rbd;
int i, error, n;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
for (n = 0; n < ET_RX_NRING; ++n) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
rbd = &sc->sc_rx_data[n];
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
for (i = 0; i < ET_RX_NDESC; ++i) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
error = rbd->rbd_newbuf(rbd, i);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (error) {
if_printf(sc->ifp, "%d ring %d buf, "
"newbuf failed: %d\n", n, i, error);
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
}
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
rxsd = &sc->sc_rx_status;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bzero(rxsd->rxsd_status, sizeof(struct et_rxstatus));
bus_dmamap_sync(rxsd->rxsd_dtag, rxsd->rxsd_dmap,
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
rxst_ring = &sc->sc_rxstat_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bzero(rxst_ring->rsr_stat, ET_RXSTAT_RING_SIZE);
bus_dmamap_sync(rxst_ring->rsr_dtag, rxst_ring->rsr_dmap,
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_init_rxdma(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_rxstatus_data *rxsd;
struct et_rxstat_ring *rxst_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
struct et_rxdesc_ring *rx_ring;
int error;
error = et_stop_rxdma(sc);
if (error) {
if_printf(sc->ifp, "can't init RX DMA engine\n");
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
/*
* Install RX status
*/
style. No functional changes.
2012-01-10 20:52:02 +00:00
rxsd = &sc->sc_rx_status;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_RX_STATUS_HI, ET_ADDR_HI(rxsd->rxsd_paddr));
CSR_WRITE_4(sc, ET_RX_STATUS_LO, ET_ADDR_LO(rxsd->rxsd_paddr));
/*
* Install RX stat ring
*/
style. No functional changes.
2012-01-10 20:52:02 +00:00
rxst_ring = &sc->sc_rxstat_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_RXSTAT_HI, ET_ADDR_HI(rxst_ring->rsr_paddr));
CSR_WRITE_4(sc, ET_RXSTAT_LO, ET_ADDR_LO(rxst_ring->rsr_paddr));
CSR_WRITE_4(sc, ET_RXSTAT_CNT, ET_RX_NSTAT - 1);
CSR_WRITE_4(sc, ET_RXSTAT_POS, 0);
CSR_WRITE_4(sc, ET_RXSTAT_MINCNT, ((ET_RX_NSTAT * 15) / 100) - 1);
/* Match ET_RXSTAT_POS */
rxst_ring->rsr_index = 0;
rxst_ring->rsr_wrap = 0;
/*
* Install the 2nd RX descriptor ring
*/
rx_ring = &sc->sc_rx_ring[1];
CSR_WRITE_4(sc, ET_RX_RING1_HI, ET_ADDR_HI(rx_ring->rr_paddr));
CSR_WRITE_4(sc, ET_RX_RING1_LO, ET_ADDR_LO(rx_ring->rr_paddr));
CSR_WRITE_4(sc, ET_RX_RING1_CNT, ET_RX_NDESC - 1);
CSR_WRITE_4(sc, ET_RX_RING1_POS, ET_RX_RING1_POS_WRAP);
CSR_WRITE_4(sc, ET_RX_RING1_MINCNT, ((ET_RX_NDESC * 15) / 100) - 1);
/* Match ET_RX_RING1_POS */
rx_ring->rr_index = 0;
rx_ring->rr_wrap = 1;
/*
* Install the 1st RX descriptor ring
*/
rx_ring = &sc->sc_rx_ring[0];
CSR_WRITE_4(sc, ET_RX_RING0_HI, ET_ADDR_HI(rx_ring->rr_paddr));
CSR_WRITE_4(sc, ET_RX_RING0_LO, ET_ADDR_LO(rx_ring->rr_paddr));
CSR_WRITE_4(sc, ET_RX_RING0_CNT, ET_RX_NDESC - 1);
CSR_WRITE_4(sc, ET_RX_RING0_POS, ET_RX_RING0_POS_WRAP);
CSR_WRITE_4(sc, ET_RX_RING0_MINCNT, ((ET_RX_NDESC * 15) / 100) - 1);
/* Match ET_RX_RING0_POS */
rx_ring->rr_index = 0;
rx_ring->rr_wrap = 1;
/*
* RX intr moderation
*/
CSR_WRITE_4(sc, ET_RX_INTR_NPKTS, sc->sc_rx_intr_npkts);
CSR_WRITE_4(sc, ET_RX_INTR_DELAY, sc->sc_rx_intr_delay);
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_init_txdma(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_txdesc_ring *tx_ring;
struct et_txstatus_data *txsd;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
int error;
error = et_stop_txdma(sc);
if (error) {
if_printf(sc->ifp, "can't init TX DMA engine\n");
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
/*
* Install TX descriptor ring
*/
style. No functional changes.
2012-01-10 20:52:02 +00:00
tx_ring = &sc->sc_tx_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_TX_RING_HI, ET_ADDR_HI(tx_ring->tr_paddr));
CSR_WRITE_4(sc, ET_TX_RING_LO, ET_ADDR_LO(tx_ring->tr_paddr));
CSR_WRITE_4(sc, ET_TX_RING_CNT, ET_TX_NDESC - 1);
/*
* Install TX status
*/
style. No functional changes.
2012-01-10 20:52:02 +00:00
txsd = &sc->sc_tx_status;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_TX_STATUS_HI, ET_ADDR_HI(txsd->txsd_paddr));
CSR_WRITE_4(sc, ET_TX_STATUS_LO, ET_ADDR_LO(txsd->txsd_paddr));
CSR_WRITE_4(sc, ET_TX_READY_POS, 0);
/* Match ET_TX_READY_POS */
tx_ring->tr_ready_index = 0;
tx_ring->tr_ready_wrap = 0;
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_init_mac(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct ifnet *ifp;
const uint8_t *eaddr;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
uint32_t val;
/* Reset MAC */
CSR_WRITE_4(sc, ET_MAC_CFG1,
ET_MAC_CFG1_RST_TXFUNC | ET_MAC_CFG1_RST_RXFUNC |
ET_MAC_CFG1_RST_TXMC | ET_MAC_CFG1_RST_RXMC |
ET_MAC_CFG1_SIM_RST | ET_MAC_CFG1_SOFT_RST);
/*
* Setup inter packet gap
*/
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val = (56 << ET_IPG_NONB2B_1_SHIFT) |
(88 << ET_IPG_NONB2B_2_SHIFT) |
(80 << ET_IPG_MINIFG_SHIFT) |
(96 << ET_IPG_B2B_SHIFT);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_IPG, val);
/*
* Setup half duplex mode
*/
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val = (10 << ET_MAC_HDX_ALT_BEB_TRUNC_SHIFT) |
(15 << ET_MAC_HDX_REXMIT_MAX_SHIFT) |
(55 << ET_MAC_HDX_COLLWIN_SHIFT) |
ET_MAC_HDX_EXC_DEFER;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_MAC_HDX, val);
/* Clear MAC control */
CSR_WRITE_4(sc, ET_MAC_CTRL, 0);
/* Reset MII */
CSR_WRITE_4(sc, ET_MII_CFG, ET_MII_CFG_CLKRST);
/*
* Set MAC address
*/
style. No functional changes.
2012-01-10 20:52:02 +00:00
ifp = sc->ifp;
eaddr = IF_LLADDR(ifp);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
val = eaddr[2] | (eaddr[3] << 8) | (eaddr[4] << 16) | (eaddr[5] << 24);
CSR_WRITE_4(sc, ET_MAC_ADDR1, val);
val = (eaddr[0] << 16) | (eaddr[1] << 24);
CSR_WRITE_4(sc, ET_MAC_ADDR2, val);
/* Set max frame length */
CSR_WRITE_4(sc, ET_MAX_FRMLEN, ET_FRAMELEN(ifp->if_mtu));
/* Bring MAC out of reset state */
CSR_WRITE_4(sc, ET_MAC_CFG1, 0);
}
static void
et_init_rxmac(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct ifnet *ifp;
const uint8_t *eaddr;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
uint32_t val;
int i;
/* Disable RX MAC and WOL */
CSR_WRITE_4(sc, ET_RXMAC_CTRL, ET_RXMAC_CTRL_WOL_DISABLE);
/*
* Clear all WOL related registers
*/
for (i = 0; i < 3; ++i)
CSR_WRITE_4(sc, ET_WOL_CRC + (i * 4), 0);
for (i = 0; i < 20; ++i)
CSR_WRITE_4(sc, ET_WOL_MASK + (i * 4), 0);
/*
* Set WOL source address. XXX is this necessary?
*/
style. No functional changes.
2012-01-10 20:52:02 +00:00
ifp = sc->ifp;
eaddr = IF_LLADDR(ifp);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
val = (eaddr[2] << 24) | (eaddr[3] << 16) | (eaddr[4] << 8) | eaddr[5];
CSR_WRITE_4(sc, ET_WOL_SA_LO, val);
val = (eaddr[0] << 8) | eaddr[1];
CSR_WRITE_4(sc, ET_WOL_SA_HI, val);
/* Clear packet filters */
CSR_WRITE_4(sc, ET_PKTFILT, 0);
/* No ucast filtering */
CSR_WRITE_4(sc, ET_UCAST_FILTADDR1, 0);
CSR_WRITE_4(sc, ET_UCAST_FILTADDR2, 0);
CSR_WRITE_4(sc, ET_UCAST_FILTADDR3, 0);
if (ET_FRAMELEN(ifp->if_mtu) > ET_RXMAC_CUT_THRU_FRMLEN) {
/*
* In order to transmit jumbo packets greater than
* ET_RXMAC_CUT_THRU_FRMLEN bytes, the FIFO between
* RX MAC and RX DMA needs to be reduced in size to
* (ET_MEM_SIZE - ET_MEM_TXSIZE_EX - framelen). In
* order to implement this, we must use "cut through"
* mode in the RX MAC, which chops packets down into
* segments. In this case we selected 256 bytes,
* since this is the size of the PCI-Express TLP's
* that the ET1310 uses.
*/
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val = (ET_RXMAC_SEGSZ(256) & ET_RXMAC_MC_SEGSZ_MAX_MASK) |
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_RXMAC_MC_SEGSZ_ENABLE;
} else {
val = 0;
}
CSR_WRITE_4(sc, ET_RXMAC_MC_SEGSZ, val);
CSR_WRITE_4(sc, ET_RXMAC_MC_WATERMARK, 0);
/* Initialize RX MAC management register */
CSR_WRITE_4(sc, ET_RXMAC_MGT, 0);
CSR_WRITE_4(sc, ET_RXMAC_SPACE_AVL, 0);
CSR_WRITE_4(sc, ET_RXMAC_MGT,
ET_RXMAC_MGT_PASS_ECRC |
ET_RXMAC_MGT_PASS_ELEN |
ET_RXMAC_MGT_PASS_ETRUNC |
ET_RXMAC_MGT_CHECK_PKT);
/*
* Configure runt filtering (may not work on certain chip generation)
*/
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val = (ETHER_MIN_LEN << ET_PKTFILT_MINLEN_SHIFT) &
ET_PKTFILT_MINLEN_MASK;
val |= ET_PKTFILT_FRAG;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_PKTFILT, val);
/* Enable RX MAC but leave WOL disabled */
CSR_WRITE_4(sc, ET_RXMAC_CTRL,
ET_RXMAC_CTRL_WOL_DISABLE | ET_RXMAC_CTRL_ENABLE);
/*
* Setup multicast hash and allmulti/promisc mode
*/
et_setmulti(sc);
}
static void
et_init_txmac(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/* Disable TX MAC and FC(?) */
CSR_WRITE_4(sc, ET_TXMAC_CTRL, ET_TXMAC_CTRL_FC_DISABLE);
Announce flow control ability to PHY driver and enable RX flow control. Controller does not automatically generate pause frames based on number of available RX buffers so it's very hard to know when driver should generate XON frame in time. The only mechanism driver can detect low number of RX buffer condition is ET_INTR_RXRING0_LOW or ET_INTR_RXRING1_LOW interrupt. This interrupt is generated whenever controller notices the number of available RX buffers are lower than pre-programmed value( ET_RX_RING0_MINCNT and ET_RX_RING1_MINCNT register). This scheme does not provide a way to detect when controller sees enough number of RX buffers again such that efficient generation of XON/XOFF frame is not easy. While here, add more flow control related register definition.
2011-12-09 19:10:38 +00:00
/*
* Initialize pause time.
* This register should be set before XON/XOFF frame is
* sent by driver.
*/
CSR_WRITE_4(sc, ET_TXMAC_FLOWCTRL, 0 << ET_TXMAC_FLOWCTRL_CFPT_SHIFT);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/* Enable TX MAC but leave FC(?) diabled */
CSR_WRITE_4(sc, ET_TXMAC_CTRL,
ET_TXMAC_CTRL_ENABLE | ET_TXMAC_CTRL_FC_DISABLE);
}
static int
et_start_rxdma(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
uint32_t val;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
val = (sc->sc_rx_data[0].rbd_bufsize & ET_RXDMA_CTRL_RING0_SIZE_MASK) |
ET_RXDMA_CTRL_RING0_ENABLE;
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
val |= (sc->sc_rx_data[1].rbd_bufsize & ET_RXDMA_CTRL_RING1_SIZE_MASK) |
style. No functional changes.
2012-01-10 20:52:02 +00:00
ET_RXDMA_CTRL_RING1_ENABLE;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_RXDMA_CTRL, val);
DELAY(5);
if (CSR_READ_4(sc, ET_RXDMA_CTRL) & ET_RXDMA_CTRL_HALTED) {
if_printf(sc->ifp, "can't start RX DMA engine\n");
style(9)
2009-11-19 21:53:21 +00:00
return (ETIMEDOUT);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_start_txdma(struct et_softc *sc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
CSR_WRITE_4(sc, ET_TXDMA_CTRL, ET_TXDMA_CTRL_SINGLE_EPKT);
style(9)
2009-11-19 21:53:21 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_rxeof(struct et_softc *sc)
{
struct et_rxstatus_data *rxsd;
struct et_rxstat_ring *rxst_ring;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_rxbuf_data *rbd;
struct et_rxdesc_ring *rx_ring;
struct et_rxstat *st;
struct ifnet *ifp;
struct mbuf *m;
uint32_t rxstat_pos, rxring_pos;
uint32_t rxst_info1, rxst_info2, rxs_stat_ring;
int buflen, buf_idx, npost[2], ring_idx;
int rxst_index, rxst_wrap;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK_ASSERT(sc);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ifp = sc->ifp;
rxsd = &sc->sc_rx_status;
rxst_ring = &sc->sc_rxstat_ring;
if ((sc->sc_flags & ET_FLAG_TXRX_ENABLED) == 0)
return;
bus_dmamap_sync(rxsd->rxsd_dtag, rxsd->rxsd_dmap,
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
BUS_DMASYNC_POSTREAD);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bus_dmamap_sync(rxst_ring->rsr_dtag, rxst_ring->rsr_dmap,
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
BUS_DMASYNC_POSTREAD);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
npost[0] = npost[1] = 0;
Add initial endianness support. It seems the controller supports both big-endian and little-endian format in descriptors for Rx path but I couldn't find equivalent feature in Tx path. So just stick to little-endian for now.
2009-11-20 20:18:53 +00:00
rxs_stat_ring = le32toh(rxsd->rxsd_status->rxs_stat_ring);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
rxst_wrap = (rxs_stat_ring & ET_RXS_STATRING_WRAP) ? 1 : 0;
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
rxst_index = (rxs_stat_ring & ET_RXS_STATRING_INDEX_MASK) >>
ET_RXS_STATRING_INDEX_SHIFT;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
while (rxst_index != rxst_ring->rsr_index ||
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
rxst_wrap != rxst_ring->rsr_wrap) {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
break;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
MPASS(rxst_ring->rsr_index < ET_RX_NSTAT);
st = &rxst_ring->rsr_stat[rxst_ring->rsr_index];
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
rxst_info1 = le32toh(st->rxst_info1);
Add initial endianness support. It seems the controller supports both big-endian and little-endian format in descriptors for Rx path but I couldn't find equivalent feature in Tx path. So just stick to little-endian for now.
2009-11-20 20:18:53 +00:00
rxst_info2 = le32toh(st->rxst_info2);
buflen = (rxst_info2 & ET_RXST_INFO2_LEN_MASK) >>
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
ET_RXST_INFO2_LEN_SHIFT;
Add initial endianness support. It seems the controller supports both big-endian and little-endian format in descriptors for Rx path but I couldn't find equivalent feature in Tx path. So just stick to little-endian for now.
2009-11-20 20:18:53 +00:00
buf_idx = (rxst_info2 & ET_RXST_INFO2_BUFIDX_MASK) >>
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
ET_RXST_INFO2_BUFIDX_SHIFT;
Add initial endianness support. It seems the controller supports both big-endian and little-endian format in descriptors for Rx path but I couldn't find equivalent feature in Tx path. So just stick to little-endian for now.
2009-11-20 20:18:53 +00:00
ring_idx = (rxst_info2 & ET_RXST_INFO2_RINGIDX_MASK) >>
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
ET_RXST_INFO2_RINGIDX_SHIFT;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (++rxst_ring->rsr_index == ET_RX_NSTAT) {
rxst_ring->rsr_index = 0;
rxst_ring->rsr_wrap ^= 1;
}
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
rxstat_pos = rxst_ring->rsr_index & ET_RXSTAT_POS_INDEX_MASK;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (rxst_ring->rsr_wrap)
rxstat_pos |= ET_RXSTAT_POS_WRAP;
CSR_WRITE_4(sc, ET_RXSTAT_POS, rxstat_pos);
if (ring_idx >= ET_RX_NRING) {
ifp->if_ierrors++;
if_printf(ifp, "invalid ring index %d\n", ring_idx);
continue;
}
if (buf_idx >= ET_RX_NDESC) {
ifp->if_ierrors++;
if_printf(ifp, "invalid buf index %d\n", buf_idx);
continue;
}
rbd = &sc->sc_rx_data[ring_idx];
m = rbd->rbd_buf[buf_idx].rb_mbuf;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if ((rxst_info1 & ET_RXST_INFO1_OK) == 0){
/* Discard errored frame. */
rbd->rbd_discard(rbd, buf_idx);
} else if (rbd->rbd_newbuf(rbd, buf_idx) != 0) {
/* No available mbufs, discard it. */
ifp->if_iqdrops++;
rbd->rbd_discard(rbd, buf_idx);
} else {
buflen -= ETHER_CRC_LEN;
if (buflen < ETHER_HDR_LEN) {
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
m_freem(m);
ifp->if_ierrors++;
} else {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
m->m_pkthdr.len = m->m_len = buflen;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
m->m_pkthdr.rcvif = ifp;
ET_UNLOCK(sc);
ifp->if_input(ifp, m);
ET_LOCK(sc);
}
}
rx_ring = &sc->sc_rx_ring[ring_idx];
if (buf_idx != rx_ring->rr_index) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if_printf(ifp,
"WARNING!! ring %d, buf_idx %d, rr_idx %d\n",
ring_idx, buf_idx, rx_ring->rr_index);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
MPASS(rx_ring->rr_index < ET_RX_NDESC);
if (++rx_ring->rr_index == ET_RX_NDESC) {
rx_ring->rr_index = 0;
rx_ring->rr_wrap ^= 1;
}
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
rxring_pos = rx_ring->rr_index & ET_RX_RING_POS_INDEX_MASK;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (rx_ring->rr_wrap)
rxring_pos |= ET_RX_RING_POS_WRAP;
CSR_WRITE_4(sc, rx_ring->rr_posreg, rxring_pos);
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
bus_dmamap_sync(rxsd->rxsd_dtag, rxsd->rxsd_dmap,
BUS_DMASYNC_PREREAD);
bus_dmamap_sync(rxst_ring->rsr_dtag, rxst_ring->rsr_dmap,
BUS_DMASYNC_PREREAD);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_encap(struct et_softc *sc, struct mbuf **m0)
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_txdesc_ring *tx_ring;
struct et_txbuf_data *tbd;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
struct et_txdesc *td;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct mbuf *m;
bus_dma_segment_t segs[ET_NSEG_MAX];
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bus_dmamap_t map;
Controller does not require TX start command for every frame. So send a single TX command after setting up all TX frames. This removes unnecessary register accesses and bus_dmamap_sync(9) calls. et(4) uses TX interrupt moderation so it's possible to have TX buffers that were already transmitted but waiting for TX completion interrupt. If the number of available TX descriptor is less then 1/3 of total TX descriptor, try reclaiming first to get enough free TX descriptors before setting up TX descriptors. After r228325, et_txeof() no longer tries to send frames after reclaiming TX buffers. That change was made to give more chance to transmit frames in main interrupt handler since we can still send frames in interrupt handler with RX interrupt. So right before exiting interrupt hander, after enabling interrupt, try to send more frames. This gives slightly better performance numbers. While I'm here reduce number of spare TX descriptors from 8 to 4. Controller does not require reserved TX descriptors, it was just to reduce TX overhead. After r228325, driver has much lower TX overhead so it does not make sense to reserve 8 TX descriptors.
2011-12-07 19:08:54 +00:00
uint32_t csum_flags, last_td_ctrl2;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
int error, i, idx, first_idx, last_idx, nsegs;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
tx_ring = &sc->sc_tx_ring;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
MPASS(tx_ring->tr_ready_index < ET_TX_NDESC);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
tbd = &sc->sc_tx_data;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
first_idx = tx_ring->tr_ready_index;
map = tbd->tbd_buf[first_idx].tb_dmap;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
error = bus_dmamap_load_mbuf_sg(sc->sc_tx_tag, map, *m0, segs, &nsegs,
0);
if (error == EFBIG) {
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
m = m_collapse(*m0, M_NOWAIT, ET_NSEG_MAX);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (m == NULL) {
m_freem(*m0);
*m0 = NULL;
return (ENOMEM);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
*m0 = m;
error = bus_dmamap_load_mbuf_sg(sc->sc_tx_tag, map, *m0, segs,
&nsegs, 0);
if (error != 0) {
m_freem(*m0);
*m0 = NULL;
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
} else if (error != 0)
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* Check for descriptor overruns. */
if (tbd->tbd_used + nsegs > ET_TX_NDESC - 1) {
bus_dmamap_unload(sc->sc_tx_tag, map);
return (ENOBUFS);
}
bus_dmamap_sync(sc->sc_tx_tag, map, BUS_DMASYNC_PREWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
last_td_ctrl2 = ET_TDCTRL2_LAST_FRAG;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
sc->sc_tx += nsegs;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
if (sc->sc_tx / sc->sc_tx_intr_nsegs != sc->sc_tx_intr) {
sc->sc_tx_intr = sc->sc_tx / sc->sc_tx_intr_nsegs;
last_td_ctrl2 |= ET_TDCTRL2_INTR;
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
m = *m0;
Add IPv4/TCP/UDP Tx checksum offloading support. It seems the controller also has support for IP/TCP checksum offloading for Rx path. But I failed to find to way to enable Rx MAC to compute the checksum of received frames.
2009-11-20 20:33:59 +00:00
csum_flags = 0;
if ((m->m_pkthdr.csum_flags & ET_CSUM_FEATURES) != 0) {
if ((m->m_pkthdr.csum_flags & CSUM_IP) != 0)
csum_flags |= ET_TDCTRL2_CSUM_IP;
if ((m->m_pkthdr.csum_flags & CSUM_UDP) != 0)
csum_flags |= ET_TDCTRL2_CSUM_UDP;
else if ((m->m_pkthdr.csum_flags & CSUM_TCP) != 0)
csum_flags |= ET_TDCTRL2_CSUM_TCP;
}
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
last_idx = -1;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
for (i = 0; i < nsegs; ++i) {
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
idx = (first_idx + i) % ET_TX_NDESC;
td = &tx_ring->tr_desc[idx];
Add initial endianness support. It seems the controller supports both big-endian and little-endian format in descriptors for Rx path but I couldn't find equivalent feature in Tx path. So just stick to little-endian for now.
2009-11-20 20:18:53 +00:00
td->td_addr_hi = htole32(ET_ADDR_HI(segs[i].ds_addr));
td->td_addr_lo = htole32(ET_ADDR_LO(segs[i].ds_addr));
td->td_ctrl1 = htole32(segs[i].ds_len & ET_TDCTRL1_LEN_MASK);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (i == nsegs - 1) {
/* Last frag */
Add IPv4/TCP/UDP Tx checksum offloading support. It seems the controller also has support for IP/TCP checksum offloading for Rx path. But I failed to find to way to enable Rx MAC to compute the checksum of received frames.
2009-11-20 20:33:59 +00:00
td->td_ctrl2 = htole32(last_td_ctrl2 | csum_flags);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
last_idx = idx;
Add IPv4/TCP/UDP Tx checksum offloading support. It seems the controller also has support for IP/TCP checksum offloading for Rx path. But I failed to find to way to enable Rx MAC to compute the checksum of received frames.
2009-11-20 20:33:59 +00:00
} else
td->td_ctrl2 = htole32(csum_flags);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
MPASS(tx_ring->tr_ready_index < ET_TX_NDESC);
if (++tx_ring->tr_ready_index == ET_TX_NDESC) {
tx_ring->tr_ready_index = 0;
tx_ring->tr_ready_wrap ^= 1;
}
}
td = &tx_ring->tr_desc[first_idx];
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
/* First frag */
td->td_ctrl2 |= htole32(ET_TDCTRL2_FIRST_FRAG);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
MPASS(last_idx >= 0);
tbd->tbd_buf[first_idx].tb_dmap = tbd->tbd_buf[last_idx].tb_dmap;
tbd->tbd_buf[last_idx].tb_dmap = map;
tbd->tbd_buf[last_idx].tb_mbuf = m;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
tbd->tbd_used += nsegs;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
MPASS(tbd->tbd_used <= ET_TX_NDESC);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static void
et_txeof(struct et_softc *sc)
{
struct et_txdesc_ring *tx_ring;
struct et_txbuf_data *tbd;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_txbuf *tb;
struct ifnet *ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
uint32_t tx_done;
int end, wrap;
ET_LOCK_ASSERT(sc);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ifp = sc->ifp;
tx_ring = &sc->sc_tx_ring;
tbd = &sc->sc_tx_data;
if ((sc->sc_flags & ET_FLAG_TXRX_ENABLED) == 0)
return;
if (tbd->tbd_used == 0)
return;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
bus_dmamap_sync(tx_ring->tr_dtag, tx_ring->tr_dmap,
BUS_DMASYNC_POSTWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
tx_done = CSR_READ_4(sc, ET_TX_DONE_POS);
Remove complex macros that were used to compute bits values. Although these macros may have its own strength, its complex definition make hard to read the code. Approved by: delphij
2009-11-19 20:57:35 +00:00
end = tx_done & ET_TX_DONE_POS_INDEX_MASK;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
wrap = (tx_done & ET_TX_DONE_POS_WRAP) ? 1 : 0;
while (tbd->tbd_start_index != end || tbd->tbd_start_wrap != wrap) {
MPASS(tbd->tbd_start_index < ET_TX_NDESC);
tb = &tbd->tbd_buf[tbd->tbd_start_index];
if (tb->tb_mbuf != NULL) {
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
bus_dmamap_sync(sc->sc_tx_tag, tb->tb_dmap,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_tx_tag, tb->tb_dmap);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
m_freem(tb->tb_mbuf);
tb->tb_mbuf = NULL;
}
if (++tbd->tbd_start_index == ET_TX_NDESC) {
tbd->tbd_start_index = 0;
tbd->tbd_start_wrap ^= 1;
}
MPASS(tbd->tbd_used > 0);
tbd->tbd_used--;
}
if (tbd->tbd_used == 0)
sc->watchdog_timer = 0;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (tbd->tbd_used + ET_NSEG_SPARE < ET_TX_NDESC)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
}
Rework link state tracking and TX/RX MAC configuration. o Do not report link status if driver is not running. o TX/RX MAC configuration should be done with resolved speed, duplex and flow control after establishing a link so it can't be done in driver initialization routine. Move the configuration to miibus_statchg callback which will be called whenever any link state change is detected. At this moment, flow-control is not enabled yet mainly because I was not able to set correct flow control parameters to generate TX pause frames. o Now TX/RX MAC is enabled only when a valid link is detected. Rearragnge hardware initialization routine a bit to leave enabling MAC to miibus_statchg callback. In order to that, TX/RX DMA engine is enabled in et_init_locked(). o Introduce ET_FLAG_LINK flag to track current link state. o Introduce ET_FLAG_FASTETHER flag to mark whether controller is fast ethernet. This flag is checked in miibus_statchg callback to know whether PHY established a valid link. o In et_stop(), TX/RX MAC is explicitly disabled instead of relying on et_reset(). And move et_reset() from et_stop() to controller initialization. Controler reset is not required here and it would also clear critial registers(i.e station address, RX filter configuration, WOL etc) that are required to make WOL work. o Switching to current media is done in et_init_locked() after setting IFF_DRV_RUNNING flag. This should ensure reliable auto-negotiation/manual link establishment. o In et_start_locked(), check whether driver got a valid link before trying to send frames. o Remove checking a link in et_tick() as this is done by miibus_statchg callback.
2011-12-07 21:29:51 +00:00
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static void
et_tick(void *xsc)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
struct ifnet *ifp;
struct mii_data *mii;
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = xsc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ET_LOCK_ASSERT(sc);
ifp = sc->ifp;
mii = device_get_softc(sc->sc_miibus);
mii_tick(mii);
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
et_stats_update(sc);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (et_watchdog(sc) == EJUSTRETURN)
return;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
callout_reset(&sc->sc_tick, hz, et_tick, sc);
}
static int
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
et_newbuf_cluster(struct et_rxbuf_data *rbd, int buf_idx)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_softc *sc;
struct et_rxdesc *desc;
struct et_rxbuf *rb;
struct mbuf *m;
bus_dma_segment_t segs[1];
bus_dmamap_t dmap;
int nsegs;
MPASS(buf_idx < ET_RX_NDESC);
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (m == NULL)
return (ENOBUFS);
m->m_len = m->m_pkthdr.len = MCLBYTES;
m_adj(m, ETHER_ALIGN);
sc = rbd->rbd_softc;
rb = &rbd->rbd_buf[buf_idx];
if (bus_dmamap_load_mbuf_sg(sc->sc_rx_tag, sc->sc_rx_sparemap, m,
segs, &nsegs, 0) != 0) {
m_freem(m);
return (ENOBUFS);
}
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
if (rb->rb_mbuf != NULL) {
bus_dmamap_sync(sc->sc_rx_tag, rb->rb_dmap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_rx_tag, rb->rb_dmap);
}
dmap = rb->rb_dmap;
rb->rb_dmap = sc->sc_rx_sparemap;
sc->sc_rx_sparemap = dmap;
bus_dmamap_sync(sc->sc_rx_tag, rb->rb_dmap, BUS_DMASYNC_PREREAD);
rb->rb_mbuf = m;
desc = &rbd->rbd_ring->rr_desc[buf_idx];
desc->rd_addr_hi = htole32(ET_ADDR_HI(segs[0].ds_addr));
desc->rd_addr_lo = htole32(ET_ADDR_LO(segs[0].ds_addr));
desc->rd_ctrl = htole32(buf_idx & ET_RDCTRL_BUFIDX_MASK);
bus_dmamap_sync(rbd->rbd_ring->rr_dtag, rbd->rbd_ring->rr_dmap,
BUS_DMASYNC_PREWRITE);
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
static void
et_rxbuf_discard(struct et_rxbuf_data *rbd, int buf_idx)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_rxdesc *desc;
desc = &rbd->rbd_ring->rr_desc[buf_idx];
desc->rd_ctrl = htole32(buf_idx & ET_RDCTRL_BUFIDX_MASK);
bus_dmamap_sync(rbd->rbd_ring->rr_dtag, rbd->rbd_ring->rr_dmap,
BUS_DMASYNC_PREWRITE);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
et_newbuf_hdr(struct et_rxbuf_data *rbd, int buf_idx)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
{
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
struct et_softc *sc;
struct et_rxdesc *desc;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
struct et_rxbuf *rb;
struct mbuf *m;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
bus_dma_segment_t segs[1];
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
bus_dmamap_t dmap;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
int nsegs;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
MPASS(buf_idx < ET_RX_NDESC);
Mechanically substitute flags from historic mbuf allocator with malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
MGETHDR(m, M_NOWAIT, MT_DATA);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (m == NULL)
return (ENOBUFS);
m->m_len = m->m_pkthdr.len = MHLEN;
m_adj(m, ETHER_ALIGN);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
sc = rbd->rbd_softc;
rb = &rbd->rbd_buf[buf_idx];
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (bus_dmamap_load_mbuf_sg(sc->sc_rx_mini_tag, sc->sc_rx_mini_sparemap,
m, segs, &nsegs, 0) != 0) {
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
m_freem(m);
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
return (ENOBUFS);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
if (rb->rb_mbuf != NULL) {
bus_dmamap_sync(sc->sc_rx_mini_tag, rb->rb_dmap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_rx_mini_tag, rb->rb_dmap);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
dmap = rb->rb_dmap;
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
rb->rb_dmap = sc->sc_rx_mini_sparemap;
sc->sc_rx_mini_sparemap = dmap;
bus_dmamap_sync(sc->sc_rx_mini_tag, rb->rb_dmap, BUS_DMASYNC_PREREAD);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
Overhaul bus_dma(9) usage in et(4) and clean up TX/RX path. This change should make et(4) work on any architectures. o Remove m_getl inline function and replace it with stanard mbuf interfaces. Previous code tried to minimize code duplication but this came from incorrect use of common DMA tag. Driver may be still use a common RX allocation handler with additional structure changes but I don't see much point to do that it would make it hard to understand the code. o Remove DragonflyBSD specific constant EVL_ENCAPLEN, use ETHER_VLAN_ENCAP_LEN instead. o Add bunch of new RX status definition. It seems controller supports RX checksum offloading but I was not able to make the feature work yet. Currently driver checks whether recevied frame is good one or not. o Avoid a typedef ending in '_t' as style(9) says. o Controller has no restriction on DMA address space, so there is no reason to limit the DMA address to 32bit. Descriptor rings, status blocks and TX/RX buffers now use full 64bit DMA addressing. o Allocate DMA memory shared between host and controller as coherent. o Create 3 separate DMA tags to be used as TX, mini RX ring and stanard RX ring. Previously it created a single DMA tag and it was used to all three rings. o et(4) does not support jumbo frame at this moment and I still don't quite understand how jumbo frame works on this controller so use two RX rings to handle small sized frame and normal sized frame respectively. The mini RX ring will be used to receive frames that are less than or equal to 127 bytes. The second RX ring is used to receive frames that are not handled by the first RX ring. If jumbo frame support is implemented, driver may have to choose better RX scheme by letting the second RX ring handle jumbo frames. This scheme will mimic Broadcom's efficient jumbo frame handling feature. However RAM buffer size(16KB) of the controller is too small to hold 2 jumbo frames, if 9KB jumbo frame is used, I'm not sure how good performance would it have. o In et_rxeof(), make sure to check whether controller received good frame or not. Passing corrupted frame to upper layer is bad idea. o If driver receives a bad frame or driver fails to allocate RX buffer due to resource shortage condition, reuse previously loaded DMA map for RX buffer instead of unloading/loading RX buffer again. o et_init_tx_ring() never fails so change return type to void. o In watchdog handler, show TX DMA write back status of errored frame which could be used as a clue to debug watchdog timeout. o Add missing bus_dmamap_sync() in various places such that et(4) should work with bounce buffers(e.g. PAE). o TX side bus_dmamap_load_mbuf_sg(9) support. o RX side bus_dmamap_load_mbuf_sg(9) support. o Controller has no DMA alignment limit in RX buffer so use m_adj(9) in RX buffer allocation to make IP header align on 2 bytes boundary. Otherwise it would trigger unaligned access error in upper layer on strict alignment architectures. One of down side of controller is it provides limited set of RX buffer length like most Intel controllers. This is not problem at this moment because driver does not support jumbo frame yet but it may require alignment fixup code to support jumbo frame on strict alignment architectures. o In et_txeof(), don't zero TX descriptors for transmitted frames. TX descriptors don't need write access after transmission. Driver sets IFF_DRV_OACTIVE when the number of available TX descriptors are less than or equal to ET_NSEG_SPARE. Make sure to clear IFF_DRV_OACTIVE only when the number of available TX descriptor is greater than ET_NSEG_SPARE.
2011-12-07 18:17:09 +00:00
rb->rb_mbuf = m;
desc = &rbd->rbd_ring->rr_desc[buf_idx];
desc->rd_addr_hi = htole32(ET_ADDR_HI(segs[0].ds_addr));
desc->rd_addr_lo = htole32(ET_ADDR_LO(segs[0].ds_addr));
desc->rd_ctrl = htole32(buf_idx & ET_RDCTRL_BUFIDX_MASK);
bus_dmamap_sync(rbd->rbd_ring->rr_dtag, rbd->rbd_ring->rr_dmap,
BUS_DMASYNC_PREWRITE);
return (0);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
#define ET_SYSCTL_STAT_ADD32(c, h, n, p, d) \
SYSCTL_ADD_UINT(c, h, OID_AUTO, n, CTLFLAG_RD, p, 0, d)
#define ET_SYSCTL_STAT_ADD64(c, h, n, p, d) \
SYSCTL_ADD_UQUAD(c, h, OID_AUTO, n, CTLFLAG_RD, p, d)
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
/*
* Create sysctl tree
*/
static void
et_add_sysctls(struct et_softc * sc)
{
struct sysctl_ctx_list *ctx;
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
struct sysctl_oid_list *children, *parent;
struct sysctl_oid *tree;
struct et_hw_stats *stats;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
ctx = device_get_sysctl_ctx(sc->dev);
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev));
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "rx_intr_npkts",
CTLTYPE_INT | CTLFLAG_RW, sc, 0, et_sysctl_rx_intr_npkts, "I",
"RX IM, # packets per RX interrupt");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "rx_intr_delay",
CTLTYPE_INT | CTLFLAG_RW, sc, 0, et_sysctl_rx_intr_delay, "I",
"RX IM, RX interrupt delay (x10 usec)");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "tx_intr_nsegs",
CTLFLAG_RW, &sc->sc_tx_intr_nsegs, 0,
"TX IM, # segments per TX interrupt");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "timer",
CTLFLAG_RW, &sc->sc_timer, 0, "TX timer");
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
tree = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "stats", CTLFLAG_RD,
NULL, "ET statistics");
parent = SYSCTL_CHILDREN(tree);
/* TX/RX statistics. */
stats = &sc->sc_stats;
ET_SYSCTL_STAT_ADD64(ctx, parent, "frames_64", &stats->pkts_64,
"0 to 64 bytes frames");
ET_SYSCTL_STAT_ADD64(ctx, parent, "frames_65_127", &stats->pkts_65,
"65 to 127 bytes frames");
ET_SYSCTL_STAT_ADD64(ctx, parent, "frames_128_255", &stats->pkts_128,
"128 to 255 bytes frames");
ET_SYSCTL_STAT_ADD64(ctx, parent, "frames_256_511", &stats->pkts_256,
"256 to 511 bytes frames");
ET_SYSCTL_STAT_ADD64(ctx, parent, "frames_512_1023", &stats->pkts_512,
"512 to 1023 bytes frames");
ET_SYSCTL_STAT_ADD64(ctx, parent, "frames_1024_1518", &stats->pkts_1024,
"1024 to 1518 bytes frames");
ET_SYSCTL_STAT_ADD64(ctx, parent, "frames_1519_1522", &stats->pkts_1519,
"1519 to 1522 bytes frames");
/* RX statistics. */
tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "rx", CTLFLAG_RD,
NULL, "RX MAC statistics");
children = SYSCTL_CHILDREN(tree);
ET_SYSCTL_STAT_ADD64(ctx, children, "bytes",
&stats->rx_bytes, "Good bytes");
ET_SYSCTL_STAT_ADD64(ctx, children, "frames",
&stats->rx_frames, "Good frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "crc_errs",
&stats->rx_crcerrs, "CRC errors");
ET_SYSCTL_STAT_ADD64(ctx, children, "mcast_frames",
&stats->rx_mcast, "Multicast frames");
ET_SYSCTL_STAT_ADD64(ctx, children, "bcast_frames",
&stats->rx_bcast, "Broadcast frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "control",
&stats->rx_control, "Control frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "pause",
&stats->rx_pause, "Pause frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "unknown_control",
&stats->rx_unknown_control, "Unknown control frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "align_errs",
&stats->rx_alignerrs, "Alignment errors");
ET_SYSCTL_STAT_ADD32(ctx, children, "len_errs",
&stats->rx_lenerrs, "Frames with length mismatched");
ET_SYSCTL_STAT_ADD32(ctx, children, "code_errs",
&stats->rx_codeerrs, "Frames with code error");
ET_SYSCTL_STAT_ADD32(ctx, children, "cs_errs",
&stats->rx_cserrs, "Frames with carrier sense error");
ET_SYSCTL_STAT_ADD32(ctx, children, "runts",
&stats->rx_runts, "Too short frames");
ET_SYSCTL_STAT_ADD64(ctx, children, "oversize",
&stats->rx_oversize, "Oversized frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "fragments",
&stats->rx_fragments, "Fragmented frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "jabbers",
&stats->rx_jabbers, "Frames with jabber error");
ET_SYSCTL_STAT_ADD32(ctx, children, "drop",
&stats->rx_drop, "Dropped frames");
/* TX statistics. */
tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "tx", CTLFLAG_RD,
NULL, "TX MAC statistics");
children = SYSCTL_CHILDREN(tree);
ET_SYSCTL_STAT_ADD64(ctx, children, "bytes",
&stats->tx_bytes, "Good bytes");
ET_SYSCTL_STAT_ADD64(ctx, children, "frames",
&stats->tx_frames, "Good frames");
ET_SYSCTL_STAT_ADD64(ctx, children, "mcast_frames",
&stats->tx_mcast, "Multicast frames");
ET_SYSCTL_STAT_ADD64(ctx, children, "bcast_frames",
&stats->tx_bcast, "Broadcast frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "pause",
&stats->tx_pause, "Pause frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "deferred",
&stats->tx_deferred, "Deferred frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "excess_deferred",
&stats->tx_excess_deferred, "Excessively deferred frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "single_colls",
&stats->tx_single_colls, "Single collisions");
ET_SYSCTL_STAT_ADD32(ctx, children, "multi_colls",
&stats->tx_multi_colls, "Multiple collisions");
ET_SYSCTL_STAT_ADD32(ctx, children, "late_colls",
&stats->tx_late_colls, "Late collisions");
ET_SYSCTL_STAT_ADD32(ctx, children, "excess_colls",
&stats->tx_excess_colls, "Excess collisions");
ET_SYSCTL_STAT_ADD32(ctx, children, "total_colls",
&stats->tx_total_colls, "Total collisions");
ET_SYSCTL_STAT_ADD32(ctx, children, "pause_honored",
&stats->tx_pause_honored, "Honored pause frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "drop",
&stats->tx_drop, "Dropped frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "jabbers",
&stats->tx_jabbers, "Frames with jabber errors");
ET_SYSCTL_STAT_ADD32(ctx, children, "crc_errs",
&stats->tx_crcerrs, "Frames with CRC errors");
ET_SYSCTL_STAT_ADD32(ctx, children, "control",
&stats->tx_control, "Control frames");
ET_SYSCTL_STAT_ADD64(ctx, children, "oversize",
&stats->tx_oversize, "Oversized frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "undersize",
&stats->tx_undersize, "Undersized frames");
ET_SYSCTL_STAT_ADD32(ctx, children, "fragments",
&stats->tx_fragments, "Fragmented frames");
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
#undef ET_SYSCTL_STAT_ADD32
#undef ET_SYSCTL_STAT_ADD64
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
static int
et_sysctl_rx_intr_npkts(SYSCTL_HANDLER_ARGS)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
struct ifnet *ifp;
int error, v;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = arg1;
ifp = sc->ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
v = sc->sc_rx_intr_npkts;
error = sysctl_handle_int(oidp, &v, 0, req);
if (error || req->newptr == NULL)
goto back;
if (v <= 0) {
error = EINVAL;
goto back;
}
if (sc->sc_rx_intr_npkts != v) {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
CSR_WRITE_4(sc, ET_RX_INTR_NPKTS, v);
sc->sc_rx_intr_npkts = v;
}
back:
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
static int
et_sysctl_rx_intr_delay(SYSCTL_HANDLER_ARGS)
{
style. No functional changes.
2012-01-10 20:52:02 +00:00
struct et_softc *sc;
struct ifnet *ifp;
int error, v;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
style. No functional changes.
2012-01-10 20:52:02 +00:00
sc = arg1;
ifp = sc->ifp;
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
v = sc->sc_rx_intr_delay;
error = sysctl_handle_int(oidp, &v, 0, req);
if (error || req->newptr == NULL)
goto back;
if (v <= 0) {
error = EINVAL;
goto back;
}
if (sc->sc_rx_intr_delay != v) {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
CSR_WRITE_4(sc, ET_RX_INTR_DELAY, v);
sc->sc_rx_intr_delay = v;
}
back:
style(9)
2009-11-19 21:53:21 +00:00
return (error);
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
}
Implement hardware MAC statistics counter. Counters could be queried with dev.et.%d.stats sysctl node where %d is an instance of device.
2011-12-07 21:46:09 +00:00
static void
et_stats_update(struct et_softc *sc)
{
struct ifnet *ifp;
struct et_hw_stats *stats;
stats = &sc->sc_stats;
stats->pkts_64 += CSR_READ_4(sc, ET_STAT_PKTS_64);
stats->pkts_65 += CSR_READ_4(sc, ET_STAT_PKTS_65_127);
stats->pkts_128 += CSR_READ_4(sc, ET_STAT_PKTS_128_255);
stats->pkts_256 += CSR_READ_4(sc, ET_STAT_PKTS_256_511);
stats->pkts_512 += CSR_READ_4(sc, ET_STAT_PKTS_512_1023);
stats->pkts_1024 += CSR_READ_4(sc, ET_STAT_PKTS_1024_1518);
stats->pkts_1519 += CSR_READ_4(sc, ET_STAT_PKTS_1519_1522);
stats->rx_bytes += CSR_READ_4(sc, ET_STAT_RX_BYTES);
stats->rx_frames += CSR_READ_4(sc, ET_STAT_RX_FRAMES);
stats->rx_crcerrs += CSR_READ_4(sc, ET_STAT_RX_CRC_ERR);
stats->rx_mcast += CSR_READ_4(sc, ET_STAT_RX_MCAST);
stats->rx_bcast += CSR_READ_4(sc, ET_STAT_RX_BCAST);
stats->rx_control += CSR_READ_4(sc, ET_STAT_RX_CTL);
stats->rx_pause += CSR_READ_4(sc, ET_STAT_RX_PAUSE);
stats->rx_unknown_control += CSR_READ_4(sc, ET_STAT_RX_UNKNOWN_CTL);
stats->rx_alignerrs += CSR_READ_4(sc, ET_STAT_RX_ALIGN_ERR);
stats->rx_lenerrs += CSR_READ_4(sc, ET_STAT_RX_LEN_ERR);
stats->rx_codeerrs += CSR_READ_4(sc, ET_STAT_RX_CODE_ERR);
stats->rx_cserrs += CSR_READ_4(sc, ET_STAT_RX_CS_ERR);
stats->rx_runts += CSR_READ_4(sc, ET_STAT_RX_RUNT);
stats->rx_oversize += CSR_READ_4(sc, ET_STAT_RX_OVERSIZE);
stats->rx_fragments += CSR_READ_4(sc, ET_STAT_RX_FRAG);
stats->rx_jabbers += CSR_READ_4(sc, ET_STAT_RX_JABBER);
stats->rx_drop += CSR_READ_4(sc, ET_STAT_RX_DROP);
stats->tx_bytes += CSR_READ_4(sc, ET_STAT_TX_BYTES);
stats->tx_frames += CSR_READ_4(sc, ET_STAT_TX_FRAMES);
stats->tx_mcast += CSR_READ_4(sc, ET_STAT_TX_MCAST);
stats->tx_bcast += CSR_READ_4(sc, ET_STAT_TX_BCAST);
stats->tx_pause += CSR_READ_4(sc, ET_STAT_TX_PAUSE);
stats->tx_deferred += CSR_READ_4(sc, ET_STAT_TX_DEFER);
stats->tx_excess_deferred += CSR_READ_4(sc, ET_STAT_TX_EXCESS_DEFER);
stats->tx_single_colls += CSR_READ_4(sc, ET_STAT_TX_SINGLE_COL);
stats->tx_multi_colls += CSR_READ_4(sc, ET_STAT_TX_MULTI_COL);
stats->tx_late_colls += CSR_READ_4(sc, ET_STAT_TX_LATE_COL);
stats->tx_excess_colls += CSR_READ_4(sc, ET_STAT_TX_EXCESS_COL);
stats->tx_total_colls += CSR_READ_4(sc, ET_STAT_TX_TOTAL_COL);
stats->tx_pause_honored += CSR_READ_4(sc, ET_STAT_TX_PAUSE_HONOR);
stats->tx_drop += CSR_READ_4(sc, ET_STAT_TX_DROP);
stats->tx_jabbers += CSR_READ_4(sc, ET_STAT_TX_JABBER);
stats->tx_crcerrs += CSR_READ_4(sc, ET_STAT_TX_CRC_ERR);
stats->tx_control += CSR_READ_4(sc, ET_STAT_TX_CTL);
stats->tx_oversize += CSR_READ_4(sc, ET_STAT_TX_OVERSIZE);
stats->tx_undersize += CSR_READ_4(sc, ET_STAT_TX_UNDERSIZE);
stats->tx_fragments += CSR_READ_4(sc, ET_STAT_TX_FRAG);
/* Update ifnet counters. */
ifp = sc->ifp;
ifp->if_opackets = (u_long)stats->tx_frames;
ifp->if_collisions = stats->tx_total_colls;
ifp->if_oerrors = stats->tx_drop + stats->tx_jabbers +
stats->tx_crcerrs + stats->tx_excess_deferred +
stats->tx_late_colls;
ifp->if_ipackets = (u_long)stats->rx_frames;
ifp->if_ierrors = stats->rx_crcerrs + stats->rx_alignerrs +
stats->rx_lenerrs + stats->rx_codeerrs + stats->rx_cserrs +
stats->rx_runts + stats->rx_jabbers + stats->rx_drop;
}
Implement suspend/resume methods. Driver has no issue with suspend/resume.
2011-12-05 22:22:39 +00:00
static int
et_suspend(device_t dev)
{
struct et_softc *sc;
Disable all clocks and put PHY into COMA before entering into suspend state. This will save more power. On resume, make sure to enable all clocks. While I'm here, if controller is not fast ethernet, enable gigabit PHY.
2011-12-07 23:20:14 +00:00
uint32_t pmcfg;
Implement suspend/resume methods. Driver has no issue with suspend/resume.
2011-12-05 22:22:39 +00:00
sc = device_get_softc(dev);
ET_LOCK(sc);
if ((sc->ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
et_stop(sc);
Disable all clocks and put PHY into COMA before entering into suspend state. This will save more power. On resume, make sure to enable all clocks. While I'm here, if controller is not fast ethernet, enable gigabit PHY.
2011-12-07 23:20:14 +00:00
/* Diable all clocks and put PHY into COMA. */
pmcfg = CSR_READ_4(sc, ET_PM);
pmcfg &= ~(EM_PM_GIGEPHY_ENB | ET_PM_SYSCLK_GATE | ET_PM_TXCLK_GATE |
ET_PM_RXCLK_GATE);
pmcfg |= ET_PM_PHY_SW_COMA;
CSR_WRITE_4(sc, ET_PM, pmcfg);
Implement suspend/resume methods. Driver has no issue with suspend/resume.
2011-12-05 22:22:39 +00:00
ET_UNLOCK(sc);
return (0);
}
static int
et_resume(device_t dev)
{
struct et_softc *sc;
Disable all clocks and put PHY into COMA before entering into suspend state. This will save more power. On resume, make sure to enable all clocks. While I'm here, if controller is not fast ethernet, enable gigabit PHY.
2011-12-07 23:20:14 +00:00
uint32_t pmcfg;
Implement suspend/resume methods. Driver has no issue with suspend/resume.
2011-12-05 22:22:39 +00:00
sc = device_get_softc(dev);
ET_LOCK(sc);
Disable all clocks and put PHY into COMA before entering into suspend state. This will save more power. On resume, make sure to enable all clocks. While I'm here, if controller is not fast ethernet, enable gigabit PHY.
2011-12-07 23:20:14 +00:00
/* Take PHY out of COMA and enable clocks. */
pmcfg = ET_PM_SYSCLK_GATE | ET_PM_TXCLK_GATE | ET_PM_RXCLK_GATE;
if ((sc->sc_flags & ET_FLAG_FASTETHER) == 0)
pmcfg |= EM_PM_GIGEPHY_ENB;
CSR_WRITE_4(sc, ET_PM, pmcfg);
Implement suspend/resume methods. Driver has no issue with suspend/resume.
2011-12-05 22:22:39 +00:00
if ((sc->ifp->if_flags & IFF_UP) != 0)
et_init_locked(sc);
ET_UNLOCK(sc);
return (0);
}
Reference in New Issue Copy Permalink