d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6fb826df1c
freebsd-nq/sys/dev/ep/if_epvar.h

102 lines
3.4 KiB
C
Raw Normal View History

- Split out the ISA and PCCARD specific code. - Split out the prototypes, externs and struct decls from if_epreg.h into if_epvar.h. - Add support for MCA based Etherlink III (3c529) devices. None of this code is used right now; the old if_ep driver is still in place and used. I will eventually get around to converting if_ep_isa.c to newbus once I've had a talk with Peter and DFR about the DEVICE_IDENTIFY() method. I have tested this code on my PS/2. It works. I would like EISA and ISA testers since my example hardware hasn't arrived yet. Add: dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep card to sys/conf/files Remove: i386/eisa/3c5x9.c optional ep i386/isa/if_ep.c optional ep from sys/i386/conf/files.i386 PCCARD testers wanted! I will switch off and cvs rm the old driver in favor of this copy once I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
/*
* Copyright (c) 1993 Herb Peyerl (hpeyerl@novatel.ca) All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer. 2. The name
* of the author may not be used to endorse or promote products derived from
* this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
struct ep_board {
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
u_short prod_id; /* product ID */
int cmd_off; /* command offset (bit shift) */
int mii_trans; /* activate MII transiever */
u_short res_cfg; /* resource configuration */
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
};
- Split out the ISA and PCCARD specific code. - Split out the prototypes, externs and struct decls from if_epreg.h into if_epvar.h. - Add support for MCA based Etherlink III (3c529) devices. None of this code is used right now; the old if_ep driver is still in place and used. I will eventually get around to converting if_ep_isa.c to newbus once I've had a talk with Peter and DFR about the DEVICE_IDENTIFY() method. I have tested this code on my PS/2. It works. I would like EISA and ISA testers since my example hardware hasn't arrived yet. Add: dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep card to sys/conf/files Remove: i386/eisa/3c5x9.c optional ep i386/isa/if_ep.c optional ep from sys/i386/conf/files.i386 PCCARD testers wanted! I will switch off and cvs rm the old driver in favor of this copy once I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
/*
* Ethernet software status per interface.
*/
struct ep_softc {
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
struct arpcom arpcom; /* Ethernet common part */
struct ifmedia ifmedia; /* media info */
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
device_t dev;
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
struct resource *iobase;
struct resource *irq;
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
Don't confuse tags and handles.
2003-10-19 00:03:10 +00:00
bus_space_handle_t bsh;
bus_space_tag_t bst;
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
void *ep_intrhand;
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
u_short ep_connectors; /* Connectors on this card. */
u_char ep_connector; /* Configured connector. */
- Split out the ISA and PCCARD specific code. - Split out the prototypes, externs and struct decls from if_epreg.h into if_epvar.h. - Add support for MCA based Etherlink III (3c529) devices. None of this code is used right now; the old if_ep driver is still in place and used. I will eventually get around to converting if_ep_isa.c to newbus once I've had a talk with Peter and DFR about the DEVICE_IDENTIFY() method. I have tested this code on my PS/2. It works. I would like EISA and ISA testers since my example hardware hasn't arrived yet. Add: dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep card to sys/conf/files Remove: i386/eisa/3c5x9.c optional ep i386/isa/if_ep.c optional ep from sys/i386/conf/files.i386 PCCARD testers wanted! I will switch off and cvs rm the old driver in favor of this copy once I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
struct mbuf *top;
struct mbuf *mcur;
short cur_len;
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
int stat; /* some flags */
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
#define F_RX_FIRST 0x001
#define F_PROMISC 0x008
- Split out the ISA and PCCARD specific code. - Split out the prototypes, externs and struct decls from if_epreg.h into if_epvar.h. - Add support for MCA based Etherlink III (3c529) devices. None of this code is used right now; the old if_ep driver is still in place and used. I will eventually get around to converting if_ep_isa.c to newbus once I've had a talk with Peter and DFR about the DEVICE_IDENTIFY() method. I have tested this code on my PS/2. It works. I would like EISA and ISA testers since my example hardware hasn't arrived yet. Add: dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep card to sys/conf/files Remove: i386/eisa/3c5x9.c optional ep i386/isa/if_ep.c optional ep from sys/i386/conf/files.i386 PCCARD testers wanted! I will switch off and cvs rm the old driver in favor of this copy once I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
#define F_ACCESS_32_BITS 0x100
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
int gone; /* adapter is not present (for PCCARD) */
HEADS UP! All 3c5x9 users! - Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
1999-10-27 06:25:16 +00:00
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
struct ep_board epb;
- Split out the ISA and PCCARD specific code. - Split out the prototypes, externs and struct decls from if_epreg.h into if_epvar.h. - Add support for MCA based Etherlink III (3c529) devices. None of this code is used right now; the old if_ep driver is still in place and used. I will eventually get around to converting if_ep_isa.c to newbus once I've had a talk with Peter and DFR about the DEVICE_IDENTIFY() method. I have tested this code on my PS/2. It works. I would like EISA and ISA testers since my example hardware hasn't arrived yet. Add: dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep card to sys/conf/files Remove: i386/eisa/3c5x9.c optional ep i386/isa/if_ep.c optional ep from sys/i386/conf/files.i386 PCCARD testers wanted! I will switch off and cvs rm the old driver in favor of this copy once I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
int unit;
- Split out the ISA and PCCARD specific code. - Split out the prototypes, externs and struct decls from if_epreg.h into if_epvar.h. - Add support for MCA based Etherlink III (3c529) devices. None of this code is used right now; the old if_ep driver is still in place and used. I will eventually get around to converting if_ep_isa.c to newbus once I've had a talk with Peter and DFR about the DEVICE_IDENTIFY() method. I have tested this code on my PS/2. It works. I would like EISA and ISA testers since my example hardware hasn't arrived yet. Add: dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep card to sys/conf/files Remove: i386/eisa/3c5x9.c optional ep i386/isa/if_ep.c optional ep from sys/i386/conf/files.i386 PCCARD testers wanted! I will switch off and cvs rm the old driver in favor of this copy once I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
#ifdef EP_LOCAL_STATS
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
short tx_underrun;
short rx_no_first;
short rx_no_mbuf;
short rx_overrunf;
short rx_overrunl;
- Split out the ISA and PCCARD specific code. - Split out the prototypes, externs and struct decls from if_epreg.h into if_epvar.h. - Add support for MCA based Etherlink III (3c529) devices. None of this code is used right now; the old if_ep driver is still in place and used. I will eventually get around to converting if_ep_isa.c to newbus once I've had a talk with Peter and DFR about the DEVICE_IDENTIFY() method. I have tested this code on my PS/2. It works. I would like EISA and ISA testers since my example hardware hasn't arrived yet. Add: dev/ep/if_ep.c optional ep dev/ep/if_ep_isa.c optional ep isa dev/ep/if_ep_eisa.c optional ep eisa dev/ep/if_ep_mca.c optional ep mca dev/ep/if_ep_pccard.c optional ep card to sys/conf/files Remove: i386/eisa/3c5x9.c optional ep i386/isa/if_ep.c optional ep from sys/i386/conf/files.i386 PCCARD testers wanted! I will switch off and cvs rm the old driver in favor of this copy once I've had positive feedback or have the hardware to verify that it works.
1999-09-26 06:42:36 +00:00
#endif
};
Style(9) cleanup. There was no consistent style in this driver, and The next round of commits will be to fix up locking in it. This lot is to at least give a consistent base to work off. OK'ed by: imp, mdodd
2003-07-17 19:37:56 +00:00
int ep_alloc(device_t);
void ep_free(device_t);
int ep_detach(device_t);
void ep_get_media(struct ep_softc *);
int ep_attach(struct ep_softc *);
void ep_intr(void *);
int get_e(struct ep_softc *, u_int16_t, u_int16_t *);
int ep_get_macaddr(struct ep_softc *, u_char *);
Transition to using bus_space macros rather than the inb/outb/etc. Use EP_{READ,WRITE}{,_MULTI}_{1,2,4} instead. I've had several people submit patches like this over the years of varying qualities, markm being the last. The names were chosen in consulation with mdodd on irc. I've tested this with only PCMCIA cards: 3CCE589EC and 3CCSH572BT. I've not tried with my more extensive ISA, EISA and cbus collection. Reviewed by: mdodd
2003-10-18 15:22:43 +00:00
#define EP_READ_1(sc, off) (bus_space_read_1((sc)->bsh, (sc)->bst, off))
#define EP_READ_2(sc, off) (bus_space_read_2((sc)->bsh, (sc)->bst, off))
#define EP_WRITE_1(sc, off, val) \
bus_space_write_1(sc->bsh, sc->bst, off, val)
#define EP_WRITE_2(sc, off, val) \
bus_space_write_2(sc->bsh, sc->bst, off, val)
#define EP_WRITE_MULTI_1(sc, off, addr, count) \
bus_space_write_multi_1(sc->bsh, sc->bst, off, addr, count)
#define EP_WRITE_MULTI_2(sc, off, addr, count) \
bus_space_write_multi_2(sc->bsh, sc->bst, off, addr, count)
#define EP_WRITE_MULTI_4(sc, off, addr, count) \
bus_space_write_multi_4(sc->bsh, sc->bst, off, addr, count)
#define EP_READ_MULTI_1(sc, off, addr, count) \
bus_space_read_multi_1(sc->bsh, sc->bst, off, addr, count)
#define EP_READ_MULTI_2(sc, off, addr, count) \
bus_space_read_multi_2(sc->bsh, sc->bst, off, addr, count)
#define EP_READ_MULTI_4(sc, off, addr, count) \
bus_space_read_multi_4(sc->bsh, sc->bst, off, addr, count)
Reference in New Issue Copy Permalink