freebsd-nq/sys/netinet6/ip6_ipsec.c

391 lines
10 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
2007-12-10 16:03:40 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/mac.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <net/route.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip6.h>
#include <netinet/in_pcb.h>
#include <netinet/ip_var.h>
#include <netinet/ip_options.h>
#include <machine/in_cksum.h>
#ifdef IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#include <netipsec/xform.h>
#include <netipsec/key.h>
#ifdef IPSEC_DEBUG
#include <netipsec/key_debug.h>
#else
#define KEYDEBUG(lev,arg)
#endif
#endif /*IPSEC*/
#include <netinet6/ip6_ipsec.h>
#include <netinet6/ip6_var.h>
extern struct protosw inet6sw[];
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#ifdef INET6
#ifdef IPSEC
#ifdef IPSEC_FILTERTUNNEL
static VNET_DEFINE(int, ip6_ipsec6_filtertunnel) = 1;
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#else
static VNET_DEFINE(int, ip6_ipsec6_filtertunnel) = 0;
#endif
#define V_ip6_ipsec6_filtertunnel VNET(ip6_ipsec6_filtertunnel)
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
SYSCTL_DECL(_net_inet6_ipsec6);
SYSCTL_VNET_INT(_net_inet6_ipsec6, OID_AUTO,
filtertunnel, CTLFLAG_RW, &VNET_NAME(ip6_ipsec6_filtertunnel), 0,
"If set filter packets from an IPsec tunnel.");
#endif /* IPSEC */
#endif /* INET6 */
/*
* Check if we have to jump over firewall processing for this packet.
* Called from ip6_input().
* 1 = jump over firewall, 0 = packet goes through firewall.
*/
int
ip6_ipsec_filtertunnel(struct mbuf *m)
{
#ifdef IPSEC
/*
* Bypass packet filtering for packets previously handled by IPsec.
*/
if (!V_ip6_ipsec6_filtertunnel &&
m_tag_find(m, PACKET_TAG_IPSEC_IN_DONE, NULL) != NULL)
return 1;
#endif
return 0;
}
/*
* Check if this packet has an active SA and needs to be dropped instead
* of forwarded.
* Called from ip6_input().
* 1 = drop packet, 0 = forward packet.
*/
int
ip6_ipsec_fwd(struct mbuf *m)
{
#ifdef IPSEC
struct m_tag *mtag;
struct tdb_ident *tdbi;
struct secpolicy *sp;
int s, error;
mtag = m_tag_find(m, PACKET_TAG_IPSEC_IN_DONE, NULL);
s = splnet();
if (mtag != NULL) {
tdbi = (struct tdb_ident *)(mtag + 1);
sp = ipsec_getpolicy(tdbi, IPSEC_DIR_INBOUND);
} else {
sp = ipsec_getpolicybyaddr(m, IPSEC_DIR_INBOUND,
IP_FORWARDING, &error);
}
if (sp == NULL) { /* NB: can happen if error */
splx(s);
/*XXX error stat???*/
DPRINTF(("%s: no SP for forwarding\n", __func__)); /*XXX*/
return 1;
}
/*
* Check security policy against packet attributes.
*/
error = ipsec_in_reject(sp, m);
KEY_FREESP(&sp);
splx(s);
if (error) {
V_ip6stat.ip6s_cantforward++;
return 1;
}
#endif /* IPSEC */
return 0;
}
/*
* Check if protocol type doesn't have a further header and do IPSEC
* decryption or reject right now. Protocols with further headers get
* their IPSEC treatment within the protocol specific processing.
* Called from ip6_input().
* 1 = drop packet, 0 = continue processing packet.
*/
int
ip6_ipsec_input(struct mbuf *m, int nxt)
{
#ifdef IPSEC
struct m_tag *mtag;
struct tdb_ident *tdbi;
struct secpolicy *sp;
int s, error;
/*
* enforce IPsec policy checking if we are seeing last header.
* note that we do not visit this with protocols with pcb layer
* code - like udp/tcp/raw ip.
*/
if ((inet6sw[ip6_protox[nxt]].pr_flags & PR_LASTHDR) != 0 &&
ipsec6_in_reject(m, NULL)) {
/*
* Check if the packet has already had IPsec processing
* done. If so, then just pass it along. This tag gets
* set during AH, ESP, etc. input handling, before the
* packet is returned to the ip input queue for delivery.
*/
mtag = m_tag_find(m, PACKET_TAG_IPSEC_IN_DONE, NULL);
s = splnet();
if (mtag != NULL) {
tdbi = (struct tdb_ident *)(mtag + 1);
sp = ipsec_getpolicy(tdbi, IPSEC_DIR_INBOUND);
} else {
sp = ipsec_getpolicybyaddr(m, IPSEC_DIR_INBOUND,
IP_FORWARDING, &error);
}
if (sp != NULL) {
/*
* Check security policy against packet attributes.
*/
error = ipsec_in_reject(sp, m);
KEY_FREESP(&sp);
} else {
/* XXX error stat??? */
error = EINVAL;
DPRINTF(("%s: no SP, packet discarded\n", __func__));/*XXX*/
return 1;
}
splx(s);
if (error)
return 1;
}
#endif /* IPSEC */
return 0;
}
/*
* Called from ip6_output().
* 1 = drop packet, 0 = continue processing packet,
* -1 = packet was reinjected and stop processing packet
*/
int
ip6_ipsec_output(struct mbuf **m, struct inpcb *inp, int *flags, int *error,
struct ifnet **ifp, struct secpolicy **sp)
{
#ifdef IPSEC
struct tdb_ident *tdbi;
struct m_tag *mtag;
/* XXX int s; */
if (sp == NULL)
return 1;
mtag = m_tag_find(*m, PACKET_TAG_IPSEC_PENDING_TDB, NULL);
if (mtag != NULL) {
tdbi = (struct tdb_ident *)(mtag + 1);
*sp = ipsec_getpolicy(tdbi, IPSEC_DIR_OUTBOUND);
if (*sp == NULL)
*error = -EINVAL; /* force silent drop */
m_tag_delete(*m, mtag);
} else {
*sp = ipsec4_checkpolicy(*m, IPSEC_DIR_OUTBOUND, *flags,
error, inp);
}
/*
* There are four return cases:
* sp != NULL apply IPsec policy
* sp == NULL, error == 0 no IPsec handling needed
* sp == NULL, error == -EINVAL discard packet w/o error
* sp == NULL, error != 0 discard packet, report error
*/
if (*sp != NULL) {
/* Loop detection, check if ipsec processing already done */
KASSERT((*sp)->req != NULL, ("ip_output: no ipsec request"));
for (mtag = m_tag_first(*m); mtag != NULL;
mtag = m_tag_next(*m, mtag)) {
if (mtag->m_tag_cookie != MTAG_ABI_COMPAT)
continue;
if (mtag->m_tag_id != PACKET_TAG_IPSEC_OUT_DONE &&
mtag->m_tag_id != PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED)
continue;
/*
* Check if policy has an SA associated with it.
* This can happen when an SP has yet to acquire
* an SA; e.g. on first reference. If it occurs,
* then we let ipsec4_process_packet do its thing.
*/
if ((*sp)->req->sav == NULL)
break;
tdbi = (struct tdb_ident *)(mtag + 1);
if (tdbi->spi == (*sp)->req->sav->spi &&
tdbi->proto == (*sp)->req->sav->sah->saidx.proto &&
bcmp(&tdbi->dst, &(*sp)->req->sav->sah->saidx.dst,
sizeof (union sockaddr_union)) == 0) {
/*
* No IPsec processing is needed, free
* reference to SP.
*
* NB: null pointer to avoid free at
* done: below.
*/
KEY_FREESP(sp), *sp = NULL;
/* XXX splx(s); */
goto done;
}
}
/*
* Do delayed checksums now because we send before
* this is done in the normal processing path.
*/
if ((*m)->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
ipseclog((LOG_DEBUG,
"%s: we do not support IPv4 over IPv6", __func__));
#ifdef INET
in_delayed_cksum(*m);
#endif
(*m)->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
}
/*
* Preserve KAME behaviour: ENOENT can be returned
* when an SA acquire is in progress. Don't propagate
* this to user-level; it confuses applications.
*
* XXX this will go away when the SADB is redone.
*/
if (*error == ENOENT)
*error = 0;
goto do_ipsec;
} else { /* sp == NULL */
if (*error != 0) {
/*
* Hack: -EINVAL is used to signal that a packet
* should be silently discarded. This is typically
* because we asked key management for an SA and
* it was delayed (e.g. kicked up to IKE).
*/
if (*error == -EINVAL)
*error = 0;
goto bad;
} else {
/* No IPsec processing for this packet. */
}
}
done:
return 0;
do_ipsec:
return -1;
bad:
return 1;
#endif /* IPSEC */
return 0;
}
#if 0
/*
* Compute the MTU for a forwarded packet that gets IPSEC encapsulated.
* Called from ip_forward().
* Returns MTU suggestion for ICMP needfrag reply.
*/
int
ip6_ipsec_mtu(struct mbuf *m)
{
int mtu = 0;
/*
* If the packet is routed over IPsec tunnel, tell the
* originator the tunnel MTU.
* tunnel MTU = if MTU - sizeof(IP) - ESP/AH hdrsiz
* XXX quickhack!!!
*/
#ifdef IPSEC
struct secpolicy *sp = NULL;
int ipsecerror;
int ipsechdr;
struct route *ro;
sp = ipsec_getpolicybyaddr(m,
IPSEC_DIR_OUTBOUND,
IP_FORWARDING,
&ipsecerror);
if (sp != NULL) {
/* count IPsec header size */
Try to remove/assimilate as much of formerly IPv4/6 specific (duplicate) code in sys/netipsec/ipsec.c and fold it into common, INET/6 independent functions. The file local functions ipsec4_setspidx_inpcb() and ipsec6_setspidx_inpcb() were 1:1 identical after the change in r186528. Rename to ipsec_setspidx_inpcb() and remove the duplicate. Public functions ipsec[46]_get_policy() were 1:1 identical. Remove one copy and merge in the factored out code from ipsec_get_policy() into the other. The public function left is now called ipsec_get_policy() and callers were adapted. Public functions ipsec[46]_set_policy() were 1:1 identical. Rename file local ipsec_set_policy() function to ipsec_set_policy_internal(). Remove one copy of the public functions, rename the other to ipsec_set_policy() and adapt callers. Public functions ipsec[46]_hdrsiz() were logically identical (ignoring one questionable assert in the v6 version). Rename the file local ipsec_hdrsiz() to ipsec_hdrsiz_internal(), the public function to ipsec_hdrsiz(), remove the duplicate copy and adapt the callers. The v6 version had been unused anyway. Cleanup comments. Public functions ipsec[46]_in_reject() were logically identical apart from statistics. Move the common code into a file local ipsec46_in_reject() leaving vimage+statistics in small AF specific wrapper functions. Note: unfortunately we already have a public ipsec_in_reject(). Reviewed by: sam Discussed with: rwatson (renaming to *_internal) MFC after: 26 days X-MFC: keep wrapper functions for public symbols?
2009-02-08 09:27:07 +00:00
ipsechdr = ipsec_hdrsiz(m, IPSEC_DIR_OUTBOUND, NULL);
/*
* find the correct route for outer IPv4
* header, compute tunnel MTU.
*/
if (sp->req != NULL &&
sp->req->sav != NULL &&
sp->req->sav->sah != NULL) {
ro = &sp->req->sav->sah->route_cache.sa_route;
if (ro->ro_rt && ro->ro_rt->rt_ifp) {
mtu =
ro->ro_rt->rt_rmx.rmx_mtu ?
ro->ro_rt->rt_rmx.rmx_mtu :
ro->ro_rt->rt_ifp->if_mtu;
mtu -= ipsechdr;
}
}
KEY_FREESP(&sp);
}
#endif /* IPSEC */
/* XXX else case missing. */
return mtu;
}
#endif