freebsd-nq/sys/mips/conf/AR71XX_BASE.hints

#
# $FreeBSD$
#
hint.apb.0.at="nexus0"
hint.apb.0.irq=4

# uart0
hint.uart.0.at="apb0"
# see atheros/uart_cpu_ar71xx.c why +3
hint.uart.0.maddr=0x18020003
hint.uart.0.msize=0x18
hint.uart.0.irq=3

#ohci
hint.ohci.0.at="apb0"
hint.ohci.0.maddr=0x1c000000
hint.ohci.0.msize=0x01000000
hint.ohci.0.irq=6

#ehci
hint.ehci.0.at="nexus0"
hint.ehci.0.maddr=0x1b000000
hint.ehci.0.msize=0x01000000
hint.ehci.0.irq=1

# pci
hint.pcib.0.at="nexus0"
hint.pcib.0.irq=0

hint.arge.0.at="nexus0"
hint.arge.0.maddr=0x19000000
hint.arge.0.msize=0x1000
hint.arge.0.irq=2

# phymask, media and fduplex depend upon the specific
# board.
# So each board will override the settings as needed.

hint.arge.1.at="nexus0"
hint.arge.1.maddr=0x1a000000
hint.arge.1.msize=0x1000
hint.arge.1.irq=3

# SPI flash
hint.spi.0.at="nexus0"
hint.spi.0.maddr=0x1f000000
hint.spi.0.msize=0x10

hint.mx25l.0.at="spibus0"
hint.mx25l.0.cs=0

# Watchdog
hint.ar71xx_wdog.0.at="nexus0"

# GPIO
hint.gpio.0.at="apb0"
hint.gpio.0.maddr=0x18040000
hint.gpio.0.msize=0x1000
hint.gpio.0.irq=2

# Each board should override the GPIO bus pins with the configuration
# relevant to it. Thus no pins are defined here.

# hwpmc device
hint.ar71xx_pmc.0.at="apb0"
hint.ar71xx_pmc.0.irq=5
Break out the AR71XX config file into _BASE and board specific bits. The ROUERSTATION and RSPRO variants contain: * the board specific bits (eg the RTC for RSPRO, later on it'll include the GPIO/LED definitions); * the boot specific bits (eg, on-board flash, usb flash, etc). For now the AR71XX_BASE file contains the common board config, drivers and net80211/ath wireless drivers. I'll follow this up with config files for the other boards I have (eg the Ubiquiti LSSR71, as well as some Mikrotik boards that use the AR71XX and atheros reference boards) which will be quite easy to do now. 2011-12-29 05:51:48 +00:00			`#`
- Revert changes accidentally killed by merge operation 2009-04-14 22:53:22 +00:00			`# $FreeBSD$`
Break out the AR71XX config file into _BASE and board specific bits. The ROUERSTATION and RSPRO variants contain: * the board specific bits (eg the RTC for RSPRO, later on it'll include the GPIO/LED definitions); * the boot specific bits (eg, on-board flash, usb flash, etc). For now the AR71XX_BASE file contains the common board config, drivers and net80211/ath wireless drivers. I'll follow this up with config files for the other boards I have (eg the Ubiquiti LSSR71, as well as some Mikrotik boards that use the AR71XX and atheros reference boards) which will be quite easy to do now. 2011-12-29 05:51:48 +00:00			`#`
- Revert changes accidentally killed by merge operation 2009-04-14 22:53:22 +00:00			`hint.apb.0.at="nexus0"`
			`hint.apb.0.irq=4`

			`# uart0`
			`hint.uart.0.at="apb0"`
			`# see atheros/uart_cpu_ar71xx.c why +3`
- Rollback to the hack with 3-bytes offset in base address. uart_bus_XXXXX resources are handled in uart(4) code and we need more sophysticated way to define which space should be used for device based on hints 2009-05-06 02:46:04 +00:00			`hint.uart.0.maddr=0x18020003`
- Revert changes accidentally killed by merge operation 2009-04-14 22:53:22 +00:00			`hint.uart.0.msize=0x18`
			`hint.uart.0.irq=3`

- Expand memory window for apb to include OHCI memory region - Add hints for EHCI and OHCI controllers 2009-04-19 23:08:23 +00:00			`#ohci`
			`hint.ohci.0.at="apb0"`
			`hint.ohci.0.maddr=0x1c000000`
			`hint.ohci.0.msize=0x01000000`
			`hint.ohci.0.irq=6`

			`#ehci`
			`hint.ehci.0.at="nexus0"`
			`hint.ehci.0.maddr=0x1b000000`
			`hint.ehci.0.msize=0x01000000`
			`hint.ehci.0.irq=1`

- Revert changes accidentally killed by merge operation 2009-04-14 22:53:22 +00:00			`# pci`
			`hint.pcib.0.at="nexus0"`
			`hint.pcib.0.irq=0`

			`hint.arge.0.at="nexus0"`
			`hint.arge.0.maddr=0x19000000`
			`hint.arge.0.msize=0x1000`
			`hint.arge.0.irq=2`
Break out the AR71XX config file into _BASE and board specific bits. The ROUERSTATION and RSPRO variants contain: * the board specific bits (eg the RTC for RSPRO, later on it'll include the GPIO/LED definitions); * the boot specific bits (eg, on-board flash, usb flash, etc). For now the AR71XX_BASE file contains the common board config, drivers and net80211/ath wireless drivers. I'll follow this up with config files for the other boards I have (eg the Ubiquiti LSSR71, as well as some Mikrotik boards that use the AR71XX and atheros reference boards) which will be quite easy to do now. 2011-12-29 05:51:48 +00:00
			`# phymask, media and fduplex depend upon the specific`
			`# board.`
			`# So each board will override the settings as needed.`
- Add commented hint required for RouterStation(non PRO) board 2009-09-08 05:24:09 +00:00
- Add arge1 to hints files, only one port is supported so far 2009-11-08 07:31:42 +00:00			`hint.arge.1.at="nexus0"`
			`hint.arge.1.maddr=0x1a000000`
			`hint.arge.1.msize=0x1000`
			`hint.arge.1.irq=3`
Add GPIO bus to config and hints. Also add sample gpioled device. 2010-09-28 03:34:51 +00:00
- Add spibus and mx25l device 2009-05-18 23:36:11 +00:00			`# SPI flash`
			`hint.spi.0.at="nexus0"`
			`hint.spi.0.maddr=0x1f000000`
			`hint.spi.0.msize=0x10`

			`hint.mx25l.0.at="spibus0"`
			`hint.mx25l.0.cs=0`
- Add AR71XX watchdog timer driver 2009-07-09 20:16:01 +00:00
			`# Watchdog`
			`hint.ar71xx_wdog.0.at="nexus0"`
Break out the AR71XX config file into _BASE and board specific bits. The ROUERSTATION and RSPRO variants contain: * the board specific bits (eg the RTC for RSPRO, later on it'll include the GPIO/LED definitions); * the boot specific bits (eg, on-board flash, usb flash, etc). For now the AR71XX_BASE file contains the common board config, drivers and net80211/ath wireless drivers. I'll follow this up with config files for the other boards I have (eg the Ubiquiti LSSR71, as well as some Mikrotik boards that use the AR71XX and atheros reference boards) which will be quite easy to do now. 2011-12-29 05:51:48 +00:00
			`# GPIO`
			`hint.gpio.0.at="apb0"`
			`hint.gpio.0.maddr=0x18040000`
			`hint.gpio.0.msize=0x1000`
			`hint.gpio.0.irq=2`

			`# Each board should override the GPIO bus pins with the configuration`
			`# relevant to it. Thus no pins are defined here.`

			`# hwpmc device`
			`hint.ar71xx_pmc.0.at="apb0"`
			`hint.ar71xx_pmc.0.irq=5`