d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7843bd031a
freebsd-nq/sys/dev/ex/if_exvar.h

117 lines
4.0 KiB
C
Raw Normal View History

Split out the ISA bus front end code into its own file. PCCARD attachment coming later this week. Mitsuru IWASAKI provided a patch to -mobile which I used to make sure I was doing the right thing but only a small part of the actual patch was used.
2000-05-01 09:05:19 +00:00
/*-
* Copyright (c) 1996, Javier Mart^mn Rueda (jmrueda@diatel.upm.es)
* All rights reserved.
*
* Copyright (c) 2000 Matthew N. Dodd
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
struct ex_softc {
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
struct ifnet *ifp;
Split out the ISA bus front end code into its own file. PCCARD attachment coming later this week. Mitsuru IWASAKI provided a patch to -mobile which I used to make sure I was doing the right thing but only a small part of the actual patch was used.
2000-05-01 09:05:19 +00:00
struct ifmedia ifmedia;
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com. This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go. Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr. Reviewed by: sobomax, sam
2005-06-10 16:49:24 +00:00
u_char enaddr[6];
Split out the ISA bus front end code into its own file. PCCARD attachment coming later this week. Mitsuru IWASAKI provided a patch to -mobile which I used to make sure I was doing the right thing but only a small part of the actual patch was used.
2000-05-01 09:05:19 +00:00
device_t dev;
struct resource *ioport;
int ioport_rid;
struct resource *irq;
int irq_rid;
void * ih;
u_short irq_no; /* IRQ number. */
char * irq2ee; /* irq <-> internal */
u_char * ee2irq; /* representation conversion */
u_int mem_size; /* Total memory size, in bytes. */
u_int rx_mem_size; /* Rx memory size (by default, */
/* first 3/4 of total memory). */
u_int rx_lower_limit; /* Lower and upper limits of */
u_int rx_upper_limit; /* receive buffer. */
u_int rx_head; /* Head of receive ring buffer. */
u_int tx_mem_size; /* Tx memory size (by default, */
/* last quarter of total memory).*/
u_int tx_lower_limit; /* Lower and upper limits of */
u_int tx_upper_limit; /* transmit buffer. */
u_int tx_head; /* Head and tail of */
u_int tx_tail; /* transmit ring buffer. */
u_int tx_last; /* Pointer to beginning of last */
/* frame in the chain. */
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
struct mtx lock;
struct callout timer;
int tx_timeout;
Some PC Card variants of the 82365 don't seem to like setting the IRQ number in the irq register. While there are other issues with these variants, avoiding writing to it helps interrupt generation on at least one card, and doesn't hurt on the others. Flag ISA attachment as needing INT_NO_REG written, and don't update the PC Card attachment (which will have the effect of not touching it for PC Cards). Document this in a comment, and tweak one or two formatting nits while I'm here.
2008-08-24 00:22:42 +00:00
int flags;
#define HAS_INT_NO_REG 1
Split out the ISA bus front end code into its own file. PCCARD attachment coming later this week. Mitsuru IWASAKI provided a patch to -mobile which I used to make sure I was doing the right thing but only a small part of the actual patch was used.
2000-05-01 09:05:19 +00:00
};
- Declare ex_devclass in if_ex.c - Rename module datastructures in if_ex_isa.c to be more standard.
2003-03-29 15:38:53 +00:00
extern devclass_t ex_devclass;
Split out the ISA bus front end code into its own file. PCCARD attachment coming later this week. Mitsuru IWASAKI provided a patch to -mobile which I used to make sure I was doing the right thing but only a small part of the actual patch was used.
2000-05-01 09:05:19 +00:00
extern char irq2eemap[];
extern u_char ee2irqmap[];
extern char plus_irq2eemap[];
extern u_char plus_ee2irqmap[];
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
int ex_alloc_resources(device_t);
void ex_release_resources(device_t);
int ex_attach(device_t);
int ex_detach(device_t);
Split out the ISA bus front end code into its own file. PCCARD attachment coming later this week. Mitsuru IWASAKI provided a patch to -mobile which I used to make sure I was doing the right thing but only a small part of the actual patch was used.
2000-05-01 09:05:19 +00:00
driver_intr_t ex_intr;
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
u_int16_t ex_eeprom_read(struct ex_softc *, int);
void ex_get_address(struct ex_softc *, u_char *);
int ex_card_type(u_char *);
void ex_stop(struct ex_softc *);
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
#define CSR_READ_1(sc, off) (bus_read_1((sc)->ioport, off))
#define CSR_READ_2(sc, off) (bus_read_2((sc)->ioport, off))
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_WRITE_1(sc, off, val) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_write_1((sc)->ioport, off, val)
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_WRITE_2(sc, off, val) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_write_2((sc)->ioport, off, val)
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_WRITE_MULTI_1(sc, off, addr, count) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_write_multi_1((sc)->ioport, off, addr, count)
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_WRITE_MULTI_2(sc, off, addr, count) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_write_multi_2((sc)->ioport, off, addr, count)
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_WRITE_MULTI_4(sc, off, addr, count) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_write_multi_4((sc)->ioport, off, addr, count)
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_READ_MULTI_1(sc, off, addr, count) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_read_multi_1((sc)->ioport, off, addr, count)
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_READ_MULTI_2(sc, off, addr, count) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_read_multi_2((sc)->ioport, off, addr, count)
MFp4: Use bus space rather than direct inb/outb. Minor style changes while I'm here. Extremely preliminary support for siliconix ethernet cards (but more work is required).
2004-06-27 13:10:20 +00:00
#define CSR_READ_MULTI_4(sc, off, addr, count) \
Make ex(4) MPSAFE: - Add a mutex to the softc to protect the softc and device hardware. - Use a private watchdog timer. - Setup interrupt handler after ether_ifattach(). - Use bus_foo() rather than bus_space_foo() and remove bus space tag and handle from softc. Tested by: imp
2008-06-13 12:14:22 +00:00
bus_read_multi_4((sc)->ioport, off, addr, count)
#define EX_LOCK(sc) mtx_lock(&(sc)->lock)
#define EX_UNLOCK(sc) mtx_unlock(&(sc)->lock)
#define EX_ASSERT_LOCKED(sc) mtx_assert(&(sc)->lock, MA_OWNED)
Reference in New Issue Copy Permalink