1998-06-10 10:57:29 +00:00
|
|
|
/*-
|
1998-06-14 13:46:10 +00:00
|
|
|
* Copyright (c) 1997,1998 Doug Rabson
|
1998-06-10 10:57:29 +00:00
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*
|
1999-08-28 01:08:13 +00:00
|
|
|
* $FreeBSD$
|
1998-06-10 10:57:29 +00:00
|
|
|
*/
|
|
|
|
|
1999-10-11 15:19:12 +00:00
|
|
|
#include "opt_bus.h"
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/queue.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/module.h>
|
1999-10-11 15:19:12 +00:00
|
|
|
#ifdef DEVICE_SYSCTLS
|
1999-03-29 08:54:20 +00:00
|
|
|
#include <sys/sysctl.h>
|
1999-10-11 15:19:12 +00:00
|
|
|
#endif
|
2000-04-08 14:17:18 +00:00
|
|
|
#include <sys/kobj.h>
|
1998-06-10 10:57:29 +00:00
|
|
|
#include <sys/bus_private.h>
|
|
|
|
#include <sys/systm.h>
|
1999-05-22 14:57:15 +00:00
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <sys/rman.h>
|
1999-01-16 17:44:09 +00:00
|
|
|
#include <machine/stdarg.h> /* for device_printf() */
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1999-09-10 21:11:23 +00:00
|
|
|
MALLOC_DEFINE(M_BUS, "bus", "Bus data structures");
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
#ifdef BUS_DEBUG
|
2000-05-03 17:45:04 +00:00
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
|
|
|
static int bus_debug = 1;
|
|
|
|
SYSCTL_INT(_debug, OID_AUTO, bus_debug, CTLFLAG_RW, &bus_debug, 0, "Debug bus code");
|
|
|
|
|
|
|
|
#define PDEBUG(a) if (bus_debug) {printf(__FUNCTION__ ":%d: ", __LINE__), printf a, printf("\n");}
|
1998-10-27 09:21:43 +00:00
|
|
|
#define DEVICENAME(d) ((d)? device_get_name(d): "no device")
|
|
|
|
#define DRIVERNAME(d) ((d)? d->name : "no driver")
|
|
|
|
#define DEVCLANAME(d) ((d)? d->name : "no devclass")
|
|
|
|
|
|
|
|
/* Produce the indenting, indent*2 spaces plus a '.' ahead of that to
|
|
|
|
* prevent syslog from deleting initial spaces
|
|
|
|
*/
|
|
|
|
#define indentprintf(p) do { int iJ; printf("."); for (iJ=0; iJ<indent; iJ++) printf(" "); printf p ; } while(0)
|
|
|
|
|
|
|
|
static void print_device_short(device_t dev, int indent);
|
|
|
|
static void print_device(device_t dev, int indent);
|
|
|
|
void print_device_tree_short(device_t dev, int indent);
|
|
|
|
void print_device_tree(device_t dev, int indent);
|
|
|
|
static void print_driver_short(driver_t *driver, int indent);
|
|
|
|
static void print_driver(driver_t *driver, int indent);
|
|
|
|
static void print_driver_list(driver_list_t drivers, int indent);
|
|
|
|
static void print_devclass_short(devclass_t dc, int indent);
|
|
|
|
static void print_devclass(devclass_t dc, int indent);
|
|
|
|
void print_devclass_list_short(void);
|
|
|
|
void print_devclass_list(void);
|
|
|
|
|
|
|
|
#else
|
|
|
|
/* Make the compiler ignore the function calls */
|
|
|
|
#define PDEBUG(a) /* nop */
|
|
|
|
#define DEVICENAME(d) /* nop */
|
|
|
|
#define DRIVERNAME(d) /* nop */
|
|
|
|
#define DEVCLANAME(d) /* nop */
|
|
|
|
|
|
|
|
#define print_device_short(d,i) /* nop */
|
|
|
|
#define print_device(d,i) /* nop */
|
|
|
|
#define print_device_tree_short(d,i) /* nop */
|
|
|
|
#define print_device_tree(d,i) /* nop */
|
|
|
|
#define print_driver_short(d,i) /* nop */
|
|
|
|
#define print_driver(d,i) /* nop */
|
|
|
|
#define print_driver_list(d,i) /* nop */
|
|
|
|
#define print_devclass_short(d,i) /* nop */
|
|
|
|
#define print_devclass(d,i) /* nop */
|
|
|
|
#define print_devclass_list_short() /* nop */
|
|
|
|
#define print_devclass_list() /* nop */
|
|
|
|
#endif
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
#ifdef DEVICE_SYSCTLS
|
|
|
|
static void device_register_oids(device_t dev);
|
|
|
|
static void device_unregister_oids(device_t dev);
|
|
|
|
#endif
|
1998-10-27 09:21:43 +00:00
|
|
|
|
2000-06-15 09:57:20 +00:00
|
|
|
extern char static_hints[];
|
|
|
|
static int hints_loaded;
|
|
|
|
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_method_t null_methods[] = {
|
|
|
|
{ 0, 0 }
|
1998-06-14 13:46:10 +00:00
|
|
|
};
|
|
|
|
|
2000-04-08 14:17:18 +00:00
|
|
|
DEFINE_CLASS(null, null_methods, 0);
|
1999-04-16 21:22:55 +00:00
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
/*
|
|
|
|
* Devclass implementation
|
|
|
|
*/
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
static devclass_list_t devclasses = TAILQ_HEAD_INITIALIZER(devclasses);
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
static devclass_t
|
|
|
|
devclass_find_internal(const char *classname, int create)
|
|
|
|
{
|
|
|
|
devclass_t dc;
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("looking for %s", classname));
|
|
|
|
if (!classname)
|
|
|
|
return NULL;
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
for (dc = TAILQ_FIRST(&devclasses); dc; dc = TAILQ_NEXT(dc, link))
|
|
|
|
if (!strcmp(dc->name, classname))
|
|
|
|
return dc;
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s not found%s", classname, (create? ", creating": "")));
|
1998-06-10 10:57:29 +00:00
|
|
|
if (create) {
|
|
|
|
dc = malloc(sizeof(struct devclass) + strlen(classname) + 1,
|
1999-09-10 21:11:23 +00:00
|
|
|
M_BUS, M_NOWAIT);
|
1998-06-10 10:57:29 +00:00
|
|
|
if (!dc)
|
|
|
|
return NULL;
|
1999-04-16 21:22:55 +00:00
|
|
|
bzero(dc, sizeof(struct devclass) + strlen(classname) + 1);
|
1998-06-10 10:57:29 +00:00
|
|
|
dc->name = (char*) (dc + 1);
|
|
|
|
strcpy(dc->name, classname);
|
|
|
|
dc->devices = NULL;
|
|
|
|
dc->maxunit = 0;
|
|
|
|
TAILQ_INIT(&dc->drivers);
|
|
|
|
TAILQ_INSERT_TAIL(&devclasses, dc, link);
|
|
|
|
}
|
|
|
|
|
|
|
|
return dc;
|
|
|
|
}
|
|
|
|
|
1999-05-30 10:27:11 +00:00
|
|
|
devclass_t
|
|
|
|
devclass_create(const char *classname)
|
|
|
|
{
|
|
|
|
return devclass_find_internal(classname, TRUE);
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
devclass_t
|
|
|
|
devclass_find(const char *classname)
|
|
|
|
{
|
|
|
|
return devclass_find_internal(classname, FALSE);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
devclass_add_driver(devclass_t dc, driver_t *driver)
|
|
|
|
{
|
1999-03-29 08:54:20 +00:00
|
|
|
driverlink_t dl;
|
1999-04-16 21:22:55 +00:00
|
|
|
int i;
|
1999-03-29 08:54:20 +00:00
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s", DRIVERNAME(driver)));
|
1999-03-29 08:54:20 +00:00
|
|
|
|
1999-09-10 21:11:23 +00:00
|
|
|
dl = malloc(sizeof *dl, M_BUS, M_NOWAIT);
|
1999-03-29 08:54:20 +00:00
|
|
|
if (!dl)
|
|
|
|
return ENOMEM;
|
1999-04-16 21:22:55 +00:00
|
|
|
bzero(dl, sizeof *dl);
|
1999-03-29 08:54:20 +00:00
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
/*
|
2000-05-01 10:45:15 +00:00
|
|
|
* Compile the driver's methods. Also increase the reference count
|
|
|
|
* so that the class doesn't get freed when the last instance
|
|
|
|
* goes. This means we can safely use static methods and avoids a
|
|
|
|
* double-free in devclass_delete_driver.
|
1998-06-14 13:46:10 +00:00
|
|
|
*/
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_class_compile((kobj_class_t) driver);
|
1998-06-14 13:46:10 +00:00
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
/*
|
|
|
|
* Make sure the devclass which the driver is implementing exists.
|
|
|
|
*/
|
|
|
|
devclass_find_internal(driver->name, TRUE);
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
dl->driver = driver;
|
|
|
|
TAILQ_INSERT_TAIL(&dc->drivers, dl, link);
|
1999-04-16 21:22:55 +00:00
|
|
|
driver->refs++;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Call BUS_DRIVER_ADDED for any existing busses in this class.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < dc->maxunit; i++)
|
|
|
|
if (dc->devices[i])
|
|
|
|
BUS_DRIVER_ADDED(dc->devices[i], driver);
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1998-10-27 09:21:43 +00:00
|
|
|
devclass_delete_driver(devclass_t busclass, driver_t *driver)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1998-10-27 09:21:43 +00:00
|
|
|
devclass_t dc = devclass_find(driver->name);
|
1999-03-29 08:54:20 +00:00
|
|
|
driverlink_t dl;
|
1998-06-10 10:57:29 +00:00
|
|
|
device_t dev;
|
|
|
|
int i;
|
|
|
|
int error;
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s from devclass %s", driver->name, DEVCLANAME(busclass)));
|
|
|
|
|
|
|
|
if (!dc)
|
|
|
|
return 0;
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
/*
|
|
|
|
* Find the link structure in the bus' list of drivers.
|
|
|
|
*/
|
|
|
|
for (dl = TAILQ_FIRST(&busclass->drivers); dl;
|
|
|
|
dl = TAILQ_NEXT(dl, link)) {
|
|
|
|
if (dl->driver == driver)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!dl) {
|
|
|
|
PDEBUG(("%s not found in %s list", driver->name, busclass->name));
|
|
|
|
return ENOENT;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
/*
|
|
|
|
* Disassociate from any devices. We iterate through all the
|
1998-10-27 09:21:43 +00:00
|
|
|
* devices in the devclass of the driver and detach any which are
|
1999-03-29 08:54:20 +00:00
|
|
|
* using the driver and which have a parent in the devclass which
|
|
|
|
* we are deleting from.
|
|
|
|
*
|
|
|
|
* Note that since a driver can be in multiple devclasses, we
|
|
|
|
* should not detach devices which are not children of devices in
|
|
|
|
* the affected devclass.
|
1998-06-10 10:57:29 +00:00
|
|
|
*/
|
|
|
|
for (i = 0; i < dc->maxunit; i++) {
|
|
|
|
if (dc->devices[i]) {
|
1998-10-27 09:21:43 +00:00
|
|
|
dev = dc->devices[i];
|
1999-03-29 08:54:20 +00:00
|
|
|
if (dev->driver == driver
|
|
|
|
&& dev->parent && dev->parent->devclass == busclass) {
|
1999-01-27 21:50:00 +00:00
|
|
|
if ((error = device_detach(dev)) != 0)
|
1998-10-27 09:21:43 +00:00
|
|
|
return error;
|
|
|
|
device_set_driver(dev, NULL);
|
|
|
|
}
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
TAILQ_REMOVE(&busclass->drivers, dl, link);
|
1999-09-10 21:11:23 +00:00
|
|
|
free(dl, M_BUS);
|
1999-03-29 08:54:20 +00:00
|
|
|
|
1999-04-16 21:22:55 +00:00
|
|
|
driver->refs--;
|
|
|
|
if (driver->refs == 0)
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_class_free((kobj_class_t) driver);
|
1999-04-16 21:22:55 +00:00
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
static driverlink_t
|
|
|
|
devclass_find_driver_internal(devclass_t dc, const char *classname)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1999-03-29 08:54:20 +00:00
|
|
|
driverlink_t dl;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s in devclass %s", classname, DEVCLANAME(dc)));
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
for (dl = TAILQ_FIRST(&dc->drivers); dl; dl = TAILQ_NEXT(dl, link)) {
|
|
|
|
if (!strcmp(dl->driver->name, classname))
|
|
|
|
return dl;
|
1998-10-27 09:21:43 +00:00
|
|
|
}
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("not found"));
|
1998-06-10 10:57:29 +00:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
driver_t *
|
|
|
|
devclass_find_driver(devclass_t dc, const char *classname)
|
|
|
|
{
|
|
|
|
driverlink_t dl;
|
|
|
|
|
|
|
|
dl = devclass_find_driver_internal(dc, classname);
|
|
|
|
if (dl)
|
|
|
|
return dl->driver;
|
|
|
|
else
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
const char *
|
|
|
|
devclass_get_name(devclass_t dc)
|
|
|
|
{
|
|
|
|
return dc->name;
|
|
|
|
}
|
|
|
|
|
|
|
|
device_t
|
|
|
|
devclass_get_device(devclass_t dc, int unit)
|
|
|
|
{
|
1999-05-21 08:23:58 +00:00
|
|
|
if (dc == NULL || unit < 0 || unit >= dc->maxunit)
|
1998-06-10 10:57:29 +00:00
|
|
|
return NULL;
|
|
|
|
return dc->devices[unit];
|
|
|
|
}
|
|
|
|
|
|
|
|
void *
|
|
|
|
devclass_get_softc(devclass_t dc, int unit)
|
|
|
|
{
|
|
|
|
device_t dev;
|
|
|
|
|
1999-11-30 07:06:03 +00:00
|
|
|
dev = devclass_get_device(dc, unit);
|
|
|
|
if (!dev)
|
|
|
|
return (NULL);
|
|
|
|
|
|
|
|
return (device_get_softc(dev));
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
devclass_get_devices(devclass_t dc, device_t **devlistp, int *devcountp)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
int count;
|
|
|
|
device_t *list;
|
|
|
|
|
|
|
|
count = 0;
|
|
|
|
for (i = 0; i < dc->maxunit; i++)
|
|
|
|
if (dc->devices[i])
|
|
|
|
count++;
|
|
|
|
|
|
|
|
list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT);
|
|
|
|
if (!list)
|
|
|
|
return ENOMEM;
|
1999-04-16 21:22:55 +00:00
|
|
|
bzero(list, count * sizeof(device_t));
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
count = 0;
|
|
|
|
for (i = 0; i < dc->maxunit; i++)
|
|
|
|
if (dc->devices[i]) {
|
|
|
|
list[count] = dc->devices[i];
|
|
|
|
count++;
|
|
|
|
}
|
|
|
|
|
|
|
|
*devlistp = list;
|
|
|
|
*devcountp = count;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
devclass_get_maxunit(devclass_t dc)
|
|
|
|
{
|
|
|
|
return dc->maxunit;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
devclass_alloc_unit(devclass_t dc, int *unitp)
|
|
|
|
{
|
|
|
|
int unit = *unitp;
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("unit %d in devclass %s", unit, DEVCLANAME(dc)));
|
|
|
|
|
2000-05-26 13:59:05 +00:00
|
|
|
/* If we have been given a wired unit number, check for existing device */
|
1998-06-10 10:57:29 +00:00
|
|
|
if (unit != -1) {
|
2000-03-16 09:32:59 +00:00
|
|
|
if (unit >= 0 && unit < dc->maxunit && dc->devices[unit] != NULL) {
|
2000-02-20 10:07:28 +00:00
|
|
|
if (bootverbose)
|
2000-03-16 09:32:59 +00:00
|
|
|
printf("%s-: %s%d exists, using next available unit number\n",
|
|
|
|
dc->name, dc->name, unit);
|
2000-05-26 13:59:05 +00:00
|
|
|
/* find the next available slot */
|
|
|
|
while (++unit < dc->maxunit && dc->devices[unit] != NULL)
|
|
|
|
;
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
}
|
2000-05-26 13:59:05 +00:00
|
|
|
else {
|
|
|
|
/* Unwired device, find the next available slot for it */
|
2000-03-16 09:32:59 +00:00
|
|
|
unit = 0;
|
|
|
|
while (unit < dc->maxunit && dc->devices[unit] != NULL)
|
2000-05-26 13:59:05 +00:00
|
|
|
unit++;
|
2000-03-16 09:32:59 +00:00
|
|
|
}
|
1998-06-10 10:57:29 +00:00
|
|
|
|
2000-03-16 09:32:59 +00:00
|
|
|
/*
|
|
|
|
* We've selected a unit beyond the length of the table, so let's extend
|
|
|
|
* the table to make room for all units up to and including this one.
|
|
|
|
*/
|
1998-06-10 10:57:29 +00:00
|
|
|
if (unit >= dc->maxunit) {
|
|
|
|
device_t *newlist;
|
|
|
|
int newsize;
|
|
|
|
|
2000-06-11 07:19:20 +00:00
|
|
|
newsize = roundup((unit + 1), MINALLOCSIZE / sizeof(device_t));
|
1999-09-10 21:11:23 +00:00
|
|
|
newlist = malloc(sizeof(device_t) * newsize, M_BUS, M_NOWAIT);
|
1998-06-10 10:57:29 +00:00
|
|
|
if (!newlist)
|
|
|
|
return ENOMEM;
|
|
|
|
bcopy(dc->devices, newlist, sizeof(device_t) * dc->maxunit);
|
|
|
|
bzero(newlist + dc->maxunit,
|
|
|
|
sizeof(device_t) * (newsize - dc->maxunit));
|
|
|
|
if (dc->devices)
|
1999-09-10 21:11:23 +00:00
|
|
|
free(dc->devices, M_BUS);
|
1998-06-10 10:57:29 +00:00
|
|
|
dc->devices = newlist;
|
|
|
|
dc->maxunit = newsize;
|
|
|
|
}
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("now: unit %d in devclass %s", unit, DEVCLANAME(dc)));
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
*unitp = unit;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
devclass_add_device(devclass_t dc, device_t dev)
|
|
|
|
{
|
1999-03-29 08:54:20 +00:00
|
|
|
int buflen, error;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc)));
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
buflen = strlen(dc->name) + 5;
|
1999-09-10 21:11:23 +00:00
|
|
|
dev->nameunit = malloc(buflen, M_BUS, M_NOWAIT);
|
1999-03-29 08:54:20 +00:00
|
|
|
if (!dev->nameunit)
|
|
|
|
return ENOMEM;
|
1999-04-16 21:22:55 +00:00
|
|
|
bzero(dev->nameunit, buflen);
|
1999-03-29 08:54:20 +00:00
|
|
|
|
|
|
|
if ((error = devclass_alloc_unit(dc, &dev->unit)) != 0) {
|
1999-09-10 21:11:23 +00:00
|
|
|
free(dev->nameunit, M_BUS);
|
1999-03-29 08:54:20 +00:00
|
|
|
dev->nameunit = NULL;
|
1998-06-10 10:57:29 +00:00
|
|
|
return error;
|
1999-03-29 08:54:20 +00:00
|
|
|
}
|
1998-06-10 10:57:29 +00:00
|
|
|
dc->devices[dev->unit] = dev;
|
|
|
|
dev->devclass = dc;
|
1999-03-29 08:54:20 +00:00
|
|
|
snprintf(dev->nameunit, buflen, "%s%d", dc->name, dev->unit);
|
|
|
|
|
|
|
|
#ifdef DEVICE_SYSCTLS
|
|
|
|
device_register_oids(dev);
|
|
|
|
#endif
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
devclass_delete_device(devclass_t dc, device_t dev)
|
|
|
|
{
|
1998-11-15 18:11:21 +00:00
|
|
|
if (!dc || !dev)
|
|
|
|
return 0;
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s in devclass %s", DEVICENAME(dev), DEVCLANAME(dc)));
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
if (dev->devclass != dc
|
|
|
|
|| dc->devices[dev->unit] != dev)
|
|
|
|
panic("devclass_delete_device: inconsistent device class");
|
|
|
|
dc->devices[dev->unit] = NULL;
|
|
|
|
if (dev->flags & DF_WILDCARD)
|
|
|
|
dev->unit = -1;
|
|
|
|
dev->devclass = NULL;
|
1999-09-10 21:11:23 +00:00
|
|
|
free(dev->nameunit, M_BUS);
|
1999-03-29 08:54:20 +00:00
|
|
|
dev->nameunit = NULL;
|
|
|
|
|
|
|
|
#ifdef DEVICE_SYSCTLS
|
|
|
|
device_unregister_oids(dev);
|
|
|
|
#endif
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static device_t
|
1999-12-03 08:41:24 +00:00
|
|
|
make_device(device_t parent, const char *name, int unit)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
device_t dev;
|
|
|
|
devclass_t dc;
|
|
|
|
|
1999-12-03 08:41:24 +00:00
|
|
|
PDEBUG(("%s at %s as unit %d", name, DEVICENAME(parent), unit));
|
1998-10-27 09:21:43 +00:00
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
if (name) {
|
|
|
|
dc = devclass_find_internal(name, TRUE);
|
|
|
|
if (!dc) {
|
|
|
|
printf("make_device: can't find device class %s\n", name);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
dc = NULL;
|
|
|
|
|
1999-09-10 21:11:23 +00:00
|
|
|
dev = malloc(sizeof(struct device), M_BUS, M_NOWAIT);
|
1998-06-10 10:57:29 +00:00
|
|
|
if (!dev)
|
|
|
|
return 0;
|
1999-04-16 21:22:55 +00:00
|
|
|
bzero(dev, sizeof(struct device));
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
dev->parent = parent;
|
|
|
|
TAILQ_INIT(&dev->children);
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_init((kobj_t) dev, &null_class);
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->driver = NULL;
|
1999-03-29 08:54:20 +00:00
|
|
|
dev->devclass = NULL;
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->unit = unit;
|
1999-03-29 08:54:20 +00:00
|
|
|
dev->nameunit = NULL;
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->desc = NULL;
|
|
|
|
dev->busy = 0;
|
1999-09-07 08:42:49 +00:00
|
|
|
dev->devflags = 0;
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->flags = DF_ENABLED;
|
1999-05-28 09:25:16 +00:00
|
|
|
dev->order = 0;
|
1998-06-10 10:57:29 +00:00
|
|
|
if (unit == -1)
|
|
|
|
dev->flags |= DF_WILDCARD;
|
1999-03-29 08:54:20 +00:00
|
|
|
if (name) {
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->flags |= DF_FIXEDCLASS;
|
1999-03-29 08:54:20 +00:00
|
|
|
devclass_add_device(dc, dev);
|
|
|
|
}
|
1999-12-03 08:41:24 +00:00
|
|
|
dev->ivars = NULL;
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->softc = NULL;
|
|
|
|
|
|
|
|
dev->state = DS_NOTPRESENT;
|
|
|
|
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_init((kobj_t) dev, &null_class);
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
|
1999-07-29 01:03:04 +00:00
|
|
|
static int
|
1998-06-14 13:46:10 +00:00
|
|
|
device_print_child(device_t dev, device_t child)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1999-07-29 01:03:04 +00:00
|
|
|
int retval = 0;
|
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
if (device_is_alive(child)) {
|
1999-07-29 01:03:04 +00:00
|
|
|
retval += BUS_PRINT_CHILD(dev, child);
|
1998-06-14 13:46:10 +00:00
|
|
|
} else
|
1999-07-29 01:03:04 +00:00
|
|
|
retval += device_printf(child, " not found\n");
|
|
|
|
|
|
|
|
return (retval);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
device_t
|
1999-12-03 08:41:24 +00:00
|
|
|
device_add_child(device_t dev, const char *name, int unit)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1999-12-03 08:41:24 +00:00
|
|
|
return device_add_child_ordered(dev, 0, name, unit);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
device_t
|
1999-12-03 08:41:24 +00:00
|
|
|
device_add_child_ordered(device_t dev, int order, const char *name, int unit)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1998-06-14 13:46:10 +00:00
|
|
|
device_t child;
|
1999-05-28 09:25:16 +00:00
|
|
|
device_t place;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1999-12-03 08:41:24 +00:00
|
|
|
PDEBUG(("%s at %s with order %d as unit %d",
|
|
|
|
name, DEVICENAME(dev), order, unit));
|
1998-10-27 09:21:43 +00:00
|
|
|
|
1999-12-03 08:41:24 +00:00
|
|
|
child = make_device(dev, name, unit);
|
1999-05-22 09:52:21 +00:00
|
|
|
if (child == NULL)
|
|
|
|
return child;
|
1999-05-28 09:25:16 +00:00
|
|
|
child->order = order;
|
|
|
|
|
|
|
|
TAILQ_FOREACH(place, &dev->children, link)
|
|
|
|
if (place->order > order)
|
|
|
|
break;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
if (place) {
|
1999-05-28 09:25:16 +00:00
|
|
|
/*
|
|
|
|
* The device 'place' is the first device whose order is
|
|
|
|
* greater than the new child.
|
|
|
|
*/
|
|
|
|
TAILQ_INSERT_BEFORE(place, child, link);
|
1998-06-10 10:57:29 +00:00
|
|
|
} else {
|
1999-05-28 09:25:16 +00:00
|
|
|
/*
|
|
|
|
* The new child's order is greater or equal to the order of
|
|
|
|
* any existing device. Add the child to the tail of the list.
|
|
|
|
*/
|
|
|
|
TAILQ_INSERT_TAIL(&dev->children, child, link);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
return child;
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1998-06-14 13:46:10 +00:00
|
|
|
device_delete_child(device_t dev, device_t child)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
int error;
|
1998-11-13 09:39:37 +00:00
|
|
|
device_t grandchild;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s from %s", DEVICENAME(child), DEVICENAME(dev)));
|
|
|
|
|
1998-11-13 09:39:37 +00:00
|
|
|
/* remove children first */
|
|
|
|
while ( (grandchild = TAILQ_FIRST(&child->children)) ) {
|
|
|
|
error = device_delete_child(child, grandchild);
|
|
|
|
if (error)
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
|
1999-01-27 21:50:00 +00:00
|
|
|
if ((error = device_detach(child)) != 0)
|
1998-06-10 10:57:29 +00:00
|
|
|
return error;
|
1998-06-14 13:46:10 +00:00
|
|
|
if (child->devclass)
|
|
|
|
devclass_delete_device(child->devclass, child);
|
|
|
|
TAILQ_REMOVE(&dev->children, child, link);
|
1999-03-29 08:54:20 +00:00
|
|
|
device_set_desc(child, NULL);
|
1999-09-10 21:11:23 +00:00
|
|
|
free(child, M_BUS);
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Find only devices attached to this bus.
|
|
|
|
*/
|
|
|
|
device_t
|
1998-06-14 13:46:10 +00:00
|
|
|
device_find_child(device_t dev, const char *classname, int unit)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
devclass_t dc;
|
1998-06-14 13:46:10 +00:00
|
|
|
device_t child;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
dc = devclass_find(classname);
|
|
|
|
if (!dc)
|
|
|
|
return NULL;
|
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
child = devclass_get_device(dc, unit);
|
|
|
|
if (child && child->parent == dev)
|
|
|
|
return child;
|
1998-06-10 10:57:29 +00:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
static driverlink_t
|
1998-06-10 10:57:29 +00:00
|
|
|
first_matching_driver(devclass_t dc, device_t dev)
|
|
|
|
{
|
|
|
|
if (dev->devclass)
|
1999-03-29 08:54:20 +00:00
|
|
|
return devclass_find_driver_internal(dc, dev->devclass->name);
|
1998-06-10 10:57:29 +00:00
|
|
|
else
|
|
|
|
return TAILQ_FIRST(&dc->drivers);
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
static driverlink_t
|
|
|
|
next_matching_driver(devclass_t dc, device_t dev, driverlink_t last)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
if (dev->devclass) {
|
1999-03-29 08:54:20 +00:00
|
|
|
driverlink_t dl;
|
|
|
|
for (dl = TAILQ_NEXT(last, link); dl; dl = TAILQ_NEXT(dl, link))
|
|
|
|
if (!strcmp(dev->devclass->name, dl->driver->name))
|
|
|
|
return dl;
|
1998-06-10 10:57:29 +00:00
|
|
|
return NULL;
|
|
|
|
} else
|
|
|
|
return TAILQ_NEXT(last, link);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
1998-06-14 13:46:10 +00:00
|
|
|
device_probe_child(device_t dev, device_t child)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
devclass_t dc;
|
1999-05-10 17:06:14 +00:00
|
|
|
driverlink_t best = 0;
|
1999-03-29 08:54:20 +00:00
|
|
|
driverlink_t dl;
|
1999-05-10 17:06:14 +00:00
|
|
|
int result, pri = 0;
|
1999-12-24 16:21:15 +00:00
|
|
|
int hasclass = (child->devclass != 0);
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
dc = dev->devclass;
|
1999-12-24 16:21:15 +00:00
|
|
|
if (!dc)
|
1998-06-14 13:46:10 +00:00
|
|
|
panic("device_probe_child: parent device has no devclass");
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
if (child->state == DS_ALIVE)
|
1998-06-10 10:57:29 +00:00
|
|
|
return 0;
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
for (dl = first_matching_driver(dc, child);
|
|
|
|
dl;
|
|
|
|
dl = next_matching_driver(dc, child, dl)) {
|
|
|
|
PDEBUG(("Trying %s", DRIVERNAME(dl->driver)));
|
|
|
|
device_set_driver(child, dl->driver);
|
1999-12-24 16:21:15 +00:00
|
|
|
if (!hasclass)
|
|
|
|
device_set_devclass(child, dl->driver->name);
|
1999-05-10 17:06:14 +00:00
|
|
|
result = DEVICE_PROBE(child);
|
1999-12-24 16:21:15 +00:00
|
|
|
if (!hasclass)
|
|
|
|
device_set_devclass(child, 0);
|
1999-05-10 17:06:14 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the driver returns SUCCESS, there can be no higher match
|
|
|
|
* for this device.
|
|
|
|
*/
|
|
|
|
if (result == 0) {
|
|
|
|
best = dl;
|
|
|
|
pri = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The driver returned an error so it certainly doesn't match.
|
|
|
|
*/
|
2000-02-29 09:36:25 +00:00
|
|
|
if (result > 0) {
|
|
|
|
device_set_driver(child, 0);
|
1999-05-10 17:06:14 +00:00
|
|
|
continue;
|
2000-02-29 09:36:25 +00:00
|
|
|
}
|
1999-05-10 17:06:14 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* A priority lower than SUCCESS, remember the best matching
|
|
|
|
* driver. Initialise the value of pri for the first match.
|
|
|
|
*/
|
|
|
|
if (best == 0 || result > pri) {
|
|
|
|
best = dl;
|
|
|
|
pri = result;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we found a driver, change state and initialise the devclass.
|
|
|
|
*/
|
|
|
|
if (best) {
|
|
|
|
if (!child->devclass)
|
|
|
|
device_set_devclass(child, best->driver->name);
|
|
|
|
device_set_driver(child, best->driver);
|
|
|
|
if (pri < 0) {
|
|
|
|
/*
|
|
|
|
* A bit bogus. Call the probe method again to make sure
|
|
|
|
* that we have the right description.
|
|
|
|
*/
|
|
|
|
DEVICE_PROBE(child);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
1999-05-10 17:06:14 +00:00
|
|
|
child->state = DS_ALIVE;
|
|
|
|
return 0;
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
device_t
|
1998-06-10 10:57:29 +00:00
|
|
|
device_get_parent(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->parent;
|
|
|
|
}
|
|
|
|
|
1999-01-16 17:44:09 +00:00
|
|
|
int
|
|
|
|
device_get_children(device_t dev, device_t **devlistp, int *devcountp)
|
|
|
|
{
|
|
|
|
int count;
|
|
|
|
device_t child;
|
|
|
|
device_t *list;
|
|
|
|
|
|
|
|
count = 0;
|
|
|
|
for (child = TAILQ_FIRST(&dev->children); child;
|
|
|
|
child = TAILQ_NEXT(child, link))
|
|
|
|
count++;
|
|
|
|
|
|
|
|
list = malloc(count * sizeof(device_t), M_TEMP, M_NOWAIT);
|
|
|
|
if (!list)
|
|
|
|
return ENOMEM;
|
1999-04-16 21:22:55 +00:00
|
|
|
bzero(list, count * sizeof(device_t));
|
1999-01-16 17:44:09 +00:00
|
|
|
|
|
|
|
count = 0;
|
|
|
|
for (child = TAILQ_FIRST(&dev->children); child;
|
|
|
|
child = TAILQ_NEXT(child, link)) {
|
|
|
|
list[count] = child;
|
|
|
|
count++;
|
|
|
|
}
|
|
|
|
|
|
|
|
*devlistp = list;
|
|
|
|
*devcountp = count;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
driver_t *
|
|
|
|
device_get_driver(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->driver;
|
|
|
|
}
|
|
|
|
|
|
|
|
devclass_t
|
|
|
|
device_get_devclass(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->devclass;
|
|
|
|
}
|
|
|
|
|
|
|
|
const char *
|
|
|
|
device_get_name(device_t dev)
|
|
|
|
{
|
|
|
|
if (dev->devclass)
|
|
|
|
return devclass_get_name(dev->devclass);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
const char *
|
|
|
|
device_get_nameunit(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->nameunit;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
int
|
|
|
|
device_get_unit(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->unit;
|
|
|
|
}
|
|
|
|
|
|
|
|
const char *
|
|
|
|
device_get_desc(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->desc;
|
|
|
|
}
|
|
|
|
|
1999-09-07 08:42:49 +00:00
|
|
|
u_int32_t
|
|
|
|
device_get_flags(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->devflags;
|
|
|
|
}
|
|
|
|
|
1999-07-24 09:34:12 +00:00
|
|
|
int
|
1998-11-14 21:58:51 +00:00
|
|
|
device_print_prettyname(device_t dev)
|
|
|
|
{
|
* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
|
|
|
const char *name = device_get_name(dev);
|
1998-11-14 21:58:51 +00:00
|
|
|
|
* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
|
|
|
if (name == 0)
|
|
|
|
return printf("unknown: ");
|
|
|
|
else
|
|
|
|
return printf("%s%d: ", name, device_get_unit(dev));
|
1998-11-14 21:58:51 +00:00
|
|
|
}
|
|
|
|
|
1999-07-24 09:34:12 +00:00
|
|
|
int
|
1999-01-16 17:44:09 +00:00
|
|
|
device_printf(device_t dev, const char * fmt, ...)
|
|
|
|
{
|
* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
|
|
|
va_list ap;
|
|
|
|
int retval;
|
1999-01-16 17:44:09 +00:00
|
|
|
|
* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
|
|
|
retval = device_print_prettyname(dev);
|
|
|
|
va_start(ap, fmt);
|
|
|
|
retval += vprintf(fmt, ap);
|
|
|
|
va_end(ap);
|
|
|
|
return retval;
|
1999-01-16 17:44:09 +00:00
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
static void
|
|
|
|
device_set_desc_internal(device_t dev, const char* desc, int copy)
|
|
|
|
{
|
|
|
|
if (dev->desc && (dev->flags & DF_DESCMALLOCED)) {
|
1999-09-10 21:11:23 +00:00
|
|
|
free(dev->desc, M_BUS);
|
1999-03-29 08:54:20 +00:00
|
|
|
dev->flags &= ~DF_DESCMALLOCED;
|
|
|
|
dev->desc = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (copy && desc) {
|
1999-09-10 21:11:23 +00:00
|
|
|
dev->desc = malloc(strlen(desc) + 1, M_BUS, M_NOWAIT);
|
1999-03-29 08:54:20 +00:00
|
|
|
if (dev->desc) {
|
|
|
|
strcpy(dev->desc, desc);
|
|
|
|
dev->flags |= DF_DESCMALLOCED;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
/* Avoid a -Wcast-qual warning */
|
|
|
|
dev->desc = (char *)(uintptr_t) desc;
|
|
|
|
|
|
|
|
#ifdef DEVICE_SYSCTLS
|
|
|
|
{
|
|
|
|
struct sysctl_oid *oid = &dev->oid[1];
|
|
|
|
oid->oid_arg1 = dev->desc ? dev->desc : "";
|
|
|
|
oid->oid_arg2 = dev->desc ? strlen(dev->desc) : 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
void
|
|
|
|
device_set_desc(device_t dev, const char* desc)
|
|
|
|
{
|
1999-03-29 08:54:20 +00:00
|
|
|
device_set_desc_internal(dev, desc, FALSE);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
device_set_desc_copy(device_t dev, const char* desc)
|
|
|
|
{
|
|
|
|
device_set_desc_internal(dev, desc, TRUE);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
1999-09-07 08:42:49 +00:00
|
|
|
void
|
|
|
|
device_set_flags(device_t dev, u_int32_t flags)
|
|
|
|
{
|
|
|
|
dev->devflags = flags;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
void *
|
|
|
|
device_get_softc(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->softc;
|
|
|
|
}
|
|
|
|
|
2000-07-03 13:06:29 +00:00
|
|
|
void
|
|
|
|
device_set_softc(device_t dev, void *softc)
|
|
|
|
{
|
|
|
|
if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC))
|
|
|
|
free(dev->softc, M_BUS);
|
|
|
|
dev->softc = softc;
|
|
|
|
if (dev->softc)
|
|
|
|
dev->flags |= DF_EXTERNALSOFTC;
|
|
|
|
else
|
|
|
|
dev->flags &= ~DF_EXTERNALSOFTC;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
void *
|
|
|
|
device_get_ivars(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->ivars;
|
|
|
|
}
|
|
|
|
|
1999-12-03 08:41:24 +00:00
|
|
|
void
|
|
|
|
device_set_ivars(device_t dev, void * ivars)
|
|
|
|
{
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
|
|
|
dev->ivars = ivars;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
device_state_t
|
|
|
|
device_get_state(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->state;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
device_enable(device_t dev)
|
|
|
|
{
|
|
|
|
dev->flags |= DF_ENABLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
device_disable(device_t dev)
|
|
|
|
{
|
|
|
|
dev->flags &= ~DF_ENABLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
device_busy(device_t dev)
|
|
|
|
{
|
|
|
|
if (dev->state < DS_ATTACHED)
|
|
|
|
panic("device_busy: called for unattached device");
|
|
|
|
if (dev->busy == 0 && dev->parent)
|
1998-06-14 13:46:10 +00:00
|
|
|
device_busy(dev->parent);
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->busy++;
|
|
|
|
dev->state = DS_BUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
device_unbusy(device_t dev)
|
|
|
|
{
|
|
|
|
if (dev->state != DS_BUSY)
|
|
|
|
panic("device_unbusy: called for non-busy device");
|
|
|
|
dev->busy--;
|
|
|
|
if (dev->busy == 0) {
|
1998-06-14 13:46:10 +00:00
|
|
|
if (dev->parent)
|
|
|
|
device_unbusy(dev->parent);
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->state = DS_ATTACHED;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
void
|
|
|
|
device_quiet(device_t dev)
|
|
|
|
{
|
|
|
|
dev->flags |= DF_QUIET;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
device_verbose(device_t dev)
|
|
|
|
{
|
|
|
|
dev->flags &= ~DF_QUIET;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
device_is_quiet(device_t dev)
|
|
|
|
{
|
|
|
|
return (dev->flags & DF_QUIET) != 0;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
int
|
|
|
|
device_is_enabled(device_t dev)
|
|
|
|
{
|
|
|
|
return (dev->flags & DF_ENABLED) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
device_is_alive(device_t dev)
|
|
|
|
{
|
|
|
|
return dev->state >= DS_ALIVE;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
device_set_devclass(device_t dev, const char *classname)
|
|
|
|
{
|
|
|
|
devclass_t dc;
|
|
|
|
|
1999-12-24 16:21:15 +00:00
|
|
|
if (!classname) {
|
|
|
|
if (dev->devclass)
|
|
|
|
devclass_delete_device(dev->devclass, dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
if (dev->devclass) {
|
|
|
|
printf("device_set_devclass: device class already set\n");
|
|
|
|
return EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
dc = devclass_find_internal(classname, TRUE);
|
|
|
|
if (!dc)
|
|
|
|
return ENOMEM;
|
|
|
|
|
|
|
|
return devclass_add_device(dc, dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
device_set_driver(device_t dev, driver_t *driver)
|
|
|
|
{
|
|
|
|
if (dev->state >= DS_ATTACHED)
|
|
|
|
return EBUSY;
|
|
|
|
|
|
|
|
if (dev->driver == driver)
|
|
|
|
return 0;
|
|
|
|
|
2000-07-03 13:06:29 +00:00
|
|
|
if (dev->softc && !(dev->flags & DF_EXTERNALSOFTC)) {
|
1999-09-10 21:11:23 +00:00
|
|
|
free(dev->softc, M_BUS);
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->softc = NULL;
|
|
|
|
}
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_delete((kobj_t) dev, 0);
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->driver = driver;
|
|
|
|
if (driver) {
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_init((kobj_t) dev, (kobj_class_t) driver);
|
2000-07-03 13:06:29 +00:00
|
|
|
if (!(dev->flags & DF_EXTERNALSOFTC)) {
|
|
|
|
dev->softc = malloc(driver->size, M_BUS, M_NOWAIT);
|
|
|
|
if (!dev->softc) {
|
|
|
|
kobj_init((kobj_t) dev, &null_class);
|
|
|
|
dev->driver = NULL;
|
|
|
|
return ENOMEM;
|
|
|
|
}
|
|
|
|
bzero(dev->softc, driver->size);
|
1998-10-27 09:21:43 +00:00
|
|
|
}
|
2000-04-08 14:17:18 +00:00
|
|
|
} else
|
|
|
|
kobj_init((kobj_t) dev, &null_class);
|
1998-06-10 10:57:29 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
device_probe_and_attach(device_t dev)
|
|
|
|
{
|
1998-06-14 13:46:10 +00:00
|
|
|
device_t bus = dev->parent;
|
1998-11-15 18:11:21 +00:00
|
|
|
int error = 0;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
if (dev->state >= DS_ALIVE)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (dev->flags & DF_ENABLED) {
|
1998-12-12 11:30:04 +00:00
|
|
|
error = device_probe_child(bus, dev);
|
|
|
|
if (!error) {
|
1999-03-29 08:54:20 +00:00
|
|
|
if (!device_is_quiet(dev))
|
|
|
|
device_print_child(bus, dev);
|
1998-06-14 13:46:10 +00:00
|
|
|
error = DEVICE_ATTACH(dev);
|
1998-06-10 10:57:29 +00:00
|
|
|
if (!error)
|
|
|
|
dev->state = DS_ATTACHED;
|
|
|
|
else {
|
1998-09-05 13:24:39 +00:00
|
|
|
printf("device_probe_and_attach: %s%d attach returned %d\n",
|
1998-06-10 10:57:29 +00:00
|
|
|
dev->driver->name, dev->unit, error);
|
|
|
|
device_set_driver(dev, NULL);
|
|
|
|
dev->state = DS_NOTPRESENT;
|
|
|
|
}
|
1999-07-11 13:42:37 +00:00
|
|
|
} else {
|
2000-03-16 09:32:59 +00:00
|
|
|
if (!(dev->flags & DF_DONENOMATCH)) {
|
1999-07-11 13:42:37 +00:00
|
|
|
BUS_PROBE_NOMATCH(bus, dev);
|
2000-03-16 09:32:59 +00:00
|
|
|
dev->flags |= DF_DONENOMATCH;
|
|
|
|
}
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
1998-11-14 21:58:51 +00:00
|
|
|
} else {
|
2000-02-15 19:23:34 +00:00
|
|
|
if (bootverbose) {
|
1998-11-14 21:58:51 +00:00
|
|
|
device_print_prettyname(dev);
|
|
|
|
printf("not probed (disabled)\n");
|
2000-02-15 19:23:34 +00:00
|
|
|
}
|
1998-11-14 21:58:51 +00:00
|
|
|
}
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-11-15 18:11:21 +00:00
|
|
|
return error;
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
device_detach(device_t dev)
|
|
|
|
{
|
|
|
|
int error;
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("%s", DEVICENAME(dev)));
|
1998-06-10 10:57:29 +00:00
|
|
|
if (dev->state == DS_BUSY)
|
|
|
|
return EBUSY;
|
|
|
|
if (dev->state != DS_ATTACHED)
|
|
|
|
return 0;
|
|
|
|
|
1999-01-27 21:50:00 +00:00
|
|
|
if ((error = DEVICE_DETACH(dev)) != 0)
|
1999-03-29 08:54:20 +00:00
|
|
|
return error;
|
2000-04-17 04:30:48 +00:00
|
|
|
device_printf(dev, "detached\n");
|
1999-03-29 08:54:20 +00:00
|
|
|
if (dev->parent)
|
|
|
|
BUS_CHILD_DETACHED(dev->parent, dev);
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
if (!(dev->flags & DF_FIXEDCLASS))
|
|
|
|
devclass_delete_device(dev->devclass, dev);
|
|
|
|
|
|
|
|
dev->state = DS_NOTPRESENT;
|
|
|
|
device_set_driver(dev, NULL);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
device_shutdown(device_t dev)
|
|
|
|
{
|
|
|
|
if (dev->state < DS_ATTACHED)
|
|
|
|
return 0;
|
1998-06-14 13:46:10 +00:00
|
|
|
return DEVICE_SHUTDOWN(dev);
|
|
|
|
}
|
|
|
|
|
2000-04-01 06:06:37 +00:00
|
|
|
int
|
|
|
|
device_set_unit(device_t dev, int unit)
|
|
|
|
{
|
|
|
|
devclass_t dc;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
dc = device_get_devclass(dev);
|
|
|
|
if (unit < dc->maxunit && dc->devices[unit])
|
|
|
|
return EBUSY;
|
|
|
|
err = devclass_delete_device(dc, dev);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
dev->unit = unit;
|
|
|
|
err = devclass_add_device(dc, dev);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
#ifdef DEVICE_SYSCTLS
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Sysctl nodes for devices.
|
|
|
|
*/
|
|
|
|
|
|
|
|
SYSCTL_NODE(_hw, OID_AUTO, devices, CTLFLAG_RW, 0, "A list of all devices");
|
|
|
|
|
|
|
|
static int
|
2000-07-04 11:25:35 +00:00
|
|
|
sysctl_handle_children(SYSCTL_HANDLER_ARGS)
|
1999-03-29 08:54:20 +00:00
|
|
|
{
|
|
|
|
device_t dev = arg1;
|
|
|
|
device_t child;
|
|
|
|
int first = 1, error = 0;
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children); child;
|
|
|
|
child = TAILQ_NEXT(child, link)) {
|
|
|
|
if (child->nameunit) {
|
|
|
|
if (!first) {
|
|
|
|
error = SYSCTL_OUT(req, ",", 1);
|
|
|
|
if (error) return error;
|
|
|
|
} else {
|
|
|
|
first = 0;
|
|
|
|
}
|
|
|
|
error = SYSCTL_OUT(req, child->nameunit, strlen(child->nameunit));
|
|
|
|
if (error) return error;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
error = SYSCTL_OUT(req, "", 1);
|
|
|
|
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2000-07-04 11:25:35 +00:00
|
|
|
sysctl_handle_state(SYSCTL_HANDLER_ARGS)
|
1999-03-29 08:54:20 +00:00
|
|
|
{
|
|
|
|
device_t dev = arg1;
|
|
|
|
|
|
|
|
switch (dev->state) {
|
|
|
|
case DS_NOTPRESENT:
|
|
|
|
return SYSCTL_OUT(req, "notpresent", sizeof("notpresent"));
|
|
|
|
case DS_ALIVE:
|
|
|
|
return SYSCTL_OUT(req, "alive", sizeof("alive"));
|
|
|
|
case DS_ATTACHED:
|
|
|
|
return SYSCTL_OUT(req, "attached", sizeof("attached"));
|
|
|
|
case DS_BUSY:
|
|
|
|
return SYSCTL_OUT(req, "busy", sizeof("busy"));
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
device_register_oids(device_t dev)
|
|
|
|
{
|
|
|
|
struct sysctl_oid* oid;
|
|
|
|
|
|
|
|
oid = &dev->oid[0];
|
|
|
|
bzero(oid, sizeof(*oid));
|
|
|
|
oid->oid_parent = &sysctl__hw_devices_children;
|
|
|
|
oid->oid_number = OID_AUTO;
|
|
|
|
oid->oid_kind = CTLTYPE_NODE | CTLFLAG_RW;
|
|
|
|
oid->oid_arg1 = &dev->oidlist[0];
|
|
|
|
oid->oid_arg2 = 0;
|
|
|
|
oid->oid_name = dev->nameunit;
|
|
|
|
oid->oid_handler = 0;
|
|
|
|
oid->oid_fmt = "N";
|
|
|
|
SLIST_INIT(&dev->oidlist[0]);
|
|
|
|
sysctl_register_oid(oid);
|
|
|
|
|
|
|
|
oid = &dev->oid[1];
|
|
|
|
bzero(oid, sizeof(*oid));
|
|
|
|
oid->oid_parent = &dev->oidlist[0];
|
|
|
|
oid->oid_number = OID_AUTO;
|
|
|
|
oid->oid_kind = CTLTYPE_STRING | CTLFLAG_RD;
|
|
|
|
oid->oid_arg1 = dev->desc ? dev->desc : "";
|
|
|
|
oid->oid_arg2 = dev->desc ? strlen(dev->desc) : 0;
|
|
|
|
oid->oid_name = "desc";
|
|
|
|
oid->oid_handler = sysctl_handle_string;
|
|
|
|
oid->oid_fmt = "A";
|
|
|
|
sysctl_register_oid(oid);
|
|
|
|
|
|
|
|
oid = &dev->oid[2];
|
|
|
|
bzero(oid, sizeof(*oid));
|
|
|
|
oid->oid_parent = &dev->oidlist[0];
|
|
|
|
oid->oid_number = OID_AUTO;
|
|
|
|
oid->oid_kind = CTLTYPE_INT | CTLFLAG_RD;
|
|
|
|
oid->oid_arg1 = dev;
|
|
|
|
oid->oid_arg2 = 0;
|
|
|
|
oid->oid_name = "children";
|
|
|
|
oid->oid_handler = sysctl_handle_children;
|
|
|
|
oid->oid_fmt = "A";
|
|
|
|
sysctl_register_oid(oid);
|
|
|
|
|
|
|
|
oid = &dev->oid[3];
|
|
|
|
bzero(oid, sizeof(*oid));
|
|
|
|
oid->oid_parent = &dev->oidlist[0];
|
|
|
|
oid->oid_number = OID_AUTO;
|
|
|
|
oid->oid_kind = CTLTYPE_INT | CTLFLAG_RD;
|
|
|
|
oid->oid_arg1 = dev;
|
|
|
|
oid->oid_arg2 = 0;
|
|
|
|
oid->oid_name = "state";
|
|
|
|
oid->oid_handler = sysctl_handle_state;
|
|
|
|
oid->oid_fmt = "A";
|
|
|
|
sysctl_register_oid(oid);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
device_unregister_oids(device_t dev)
|
|
|
|
{
|
|
|
|
sysctl_unregister_oid(&dev->oid[0]);
|
|
|
|
sysctl_unregister_oid(&dev->oid[1]);
|
|
|
|
sysctl_unregister_oid(&dev->oid[2]);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
1999-04-16 21:22:55 +00:00
|
|
|
/*======================================*/
|
1998-07-22 08:35:52 +00:00
|
|
|
/*
|
|
|
|
* Access functions for device resources.
|
|
|
|
*/
|
1999-04-16 21:22:55 +00:00
|
|
|
|
|
|
|
/* Runtime version */
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
static struct config_device *devtab;
|
|
|
|
static int devtab_count = 0;
|
1999-04-16 21:22:55 +00:00
|
|
|
|
|
|
|
static int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_new_name(const char *name, int unit)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
|
|
|
struct config_device *new;
|
|
|
|
|
|
|
|
new = malloc((devtab_count + 1) * sizeof(*new), M_TEMP, M_NOWAIT);
|
|
|
|
if (new == NULL)
|
|
|
|
return -1;
|
|
|
|
if (devtab && devtab_count > 0)
|
|
|
|
bcopy(devtab, new, devtab_count * sizeof(*new));
|
|
|
|
bzero(&new[devtab_count], sizeof(*new));
|
|
|
|
new[devtab_count].name = malloc(strlen(name) + 1, M_TEMP, M_NOWAIT);
|
|
|
|
if (new[devtab_count].name == NULL) {
|
|
|
|
free(new, M_TEMP);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
strcpy(new[devtab_count].name, name);
|
|
|
|
new[devtab_count].unit = unit;
|
|
|
|
new[devtab_count].resource_count = 0;
|
|
|
|
new[devtab_count].resources = NULL;
|
|
|
|
devtab = new;
|
|
|
|
return devtab_count++;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_new_resname(int j, const char *resname, resource_type type)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
|
|
|
struct config_resource *new;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
i = devtab[j].resource_count;
|
|
|
|
new = malloc((i + 1) * sizeof(*new), M_TEMP, M_NOWAIT);
|
|
|
|
if (new == NULL)
|
|
|
|
return -1;
|
|
|
|
if (devtab[j].resources && i > 0)
|
|
|
|
bcopy(devtab[j].resources, new, i * sizeof(*new));
|
|
|
|
bzero(&new[i], sizeof(*new));
|
|
|
|
new[i].name = malloc(strlen(resname) + 1, M_TEMP, M_NOWAIT);
|
|
|
|
if (new[i].name == NULL) {
|
|
|
|
free(new, M_TEMP);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
strcpy(new[i].name, resname);
|
|
|
|
new[i].type = type;
|
|
|
|
if (devtab[j].resources)
|
|
|
|
free(devtab[j].resources, M_TEMP);
|
|
|
|
devtab[j].resources = new;
|
|
|
|
devtab[j].resource_count = i + 1;
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
1998-07-22 08:35:52 +00:00
|
|
|
static int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_match_string(int i, const char *resname, const char *value)
|
1998-07-22 08:35:52 +00:00
|
|
|
{
|
|
|
|
int j;
|
1998-11-14 21:58:51 +00:00
|
|
|
struct config_resource *res;
|
1998-07-22 08:35:52 +00:00
|
|
|
|
|
|
|
for (j = 0, res = devtab[i].resources;
|
|
|
|
j < devtab[i].resource_count; j++, res++)
|
|
|
|
if (!strcmp(res->name, resname)
|
|
|
|
&& res->type == RES_STRING
|
|
|
|
&& !strcmp(res->u.stringval, value))
|
1999-04-16 21:22:55 +00:00
|
|
|
return j;
|
|
|
|
return -1;
|
1998-07-22 08:35:52 +00:00
|
|
|
}
|
|
|
|
|
2000-06-15 09:57:20 +00:00
|
|
|
static int
|
|
|
|
resource_find_hard(const char *cp, const char *name, int unit,
|
|
|
|
const char *resname, struct config_resource **result)
|
|
|
|
{
|
2000-06-26 09:53:37 +00:00
|
|
|
char match[256];
|
2000-06-15 09:57:20 +00:00
|
|
|
int matchlen;
|
|
|
|
char *op;
|
|
|
|
long val;
|
|
|
|
|
|
|
|
snprintf(match, sizeof(match), "hint.%s.%d.%s=", name, unit, resname);
|
|
|
|
matchlen = strlen(match);
|
|
|
|
while (cp) {
|
|
|
|
if (strncmp(match, cp, matchlen) == 0)
|
|
|
|
break;
|
|
|
|
while (*cp != '\0')
|
|
|
|
cp++;
|
|
|
|
cp++;
|
|
|
|
if (*cp == '\0') {
|
|
|
|
cp = NULL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (cp)
|
|
|
|
cp += matchlen; /* skip over name and '=' */
|
|
|
|
else
|
|
|
|
return ENOENT;
|
2000-06-26 09:53:37 +00:00
|
|
|
val = strtoul(cp, &op, 0);
|
2000-06-15 09:57:20 +00:00
|
|
|
if (*cp != '\0' && *op == '\0') {
|
|
|
|
(*result)->type = RES_INT;
|
|
|
|
(*result)->u.intval = val;
|
|
|
|
} else {
|
|
|
|
(*result)->type = RES_STRING;
|
|
|
|
(*result)->u.stringval = cp;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1998-07-22 08:35:52 +00:00
|
|
|
static int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_find(const char *name, int unit, const char *resname,
|
1998-11-14 21:58:51 +00:00
|
|
|
struct config_resource **result)
|
1998-07-22 08:35:52 +00:00
|
|
|
{
|
|
|
|
int i, j;
|
1998-11-14 21:58:51 +00:00
|
|
|
struct config_resource *res;
|
1998-07-22 08:35:52 +00:00
|
|
|
|
2000-06-15 09:57:20 +00:00
|
|
|
if (!hints_loaded) {
|
|
|
|
/* First specific, then generic. Dynamic over static. */
|
|
|
|
i = resource_find_hard(kern_envp, name, unit, resname, result);
|
|
|
|
if (i == 0)
|
|
|
|
return 0;
|
|
|
|
i = resource_find_hard(static_hints, name, unit, resname,
|
|
|
|
result);
|
|
|
|
if (i == 0)
|
|
|
|
return 0;
|
|
|
|
i = resource_find_hard(kern_envp, name, -1, resname, result);
|
|
|
|
if (i == 0)
|
|
|
|
return 0;
|
|
|
|
i = resource_find_hard(static_hints, name, -1, resname, result);
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
1998-07-22 08:35:52 +00:00
|
|
|
/*
|
|
|
|
* First check specific instances, then generic.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < devtab_count; i++) {
|
|
|
|
if (devtab[i].unit < 0)
|
|
|
|
continue;
|
|
|
|
if (!strcmp(devtab[i].name, name) && devtab[i].unit == unit) {
|
|
|
|
res = devtab[i].resources;
|
|
|
|
for (j = 0; j < devtab[i].resource_count; j++, res++)
|
|
|
|
if (!strcmp(res->name, resname)) {
|
|
|
|
*result = res;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
for (i = 0; i < devtab_count; i++) {
|
|
|
|
if (devtab[i].unit >= 0)
|
|
|
|
continue;
|
2000-06-15 09:57:20 +00:00
|
|
|
if (!strcmp(devtab[i].name, name)) {
|
1998-07-22 08:35:52 +00:00
|
|
|
res = devtab[i].resources;
|
|
|
|
for (j = 0; j < devtab[i].resource_count; j++, res++)
|
|
|
|
if (!strcmp(res->name, resname)) {
|
|
|
|
*result = res;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_int_value(const char *name, int unit, const char *resname, int *result)
|
1998-07-22 08:35:52 +00:00
|
|
|
{
|
|
|
|
int error;
|
1998-11-14 21:58:51 +00:00
|
|
|
struct config_resource *res;
|
1999-04-16 21:22:55 +00:00
|
|
|
|
1998-07-22 08:35:52 +00:00
|
|
|
if ((error = resource_find(name, unit, resname, &res)) != 0)
|
|
|
|
return error;
|
|
|
|
if (res->type != RES_INT)
|
|
|
|
return EFTYPE;
|
|
|
|
*result = res->u.intval;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_long_value(const char *name, int unit, const char *resname,
|
|
|
|
long *result)
|
1998-07-22 08:35:52 +00:00
|
|
|
{
|
|
|
|
int error;
|
1998-11-14 21:58:51 +00:00
|
|
|
struct config_resource *res;
|
1999-04-16 21:22:55 +00:00
|
|
|
|
1998-07-22 08:35:52 +00:00
|
|
|
if ((error = resource_find(name, unit, resname, &res)) != 0)
|
|
|
|
return error;
|
|
|
|
if (res->type != RES_LONG)
|
|
|
|
return EFTYPE;
|
|
|
|
*result = res->u.longval;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_string_value(const char *name, int unit, const char *resname,
|
|
|
|
char **result)
|
1998-07-22 08:35:52 +00:00
|
|
|
{
|
|
|
|
int error;
|
1998-11-14 21:58:51 +00:00
|
|
|
struct config_resource *res;
|
1999-04-16 21:22:55 +00:00
|
|
|
|
1998-07-22 08:35:52 +00:00
|
|
|
if ((error = resource_find(name, unit, resname, &res)) != 0)
|
|
|
|
return error;
|
|
|
|
if (res->type != RES_STRING)
|
|
|
|
return EFTYPE;
|
|
|
|
*result = res->u.stringval;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_query_string(int i, const char *resname, const char *value)
|
1998-07-22 08:35:52 +00:00
|
|
|
{
|
|
|
|
if (i < 0)
|
|
|
|
i = 0;
|
|
|
|
else
|
|
|
|
i = i + 1;
|
|
|
|
for (; i < devtab_count; i++)
|
1999-04-16 21:22:55 +00:00
|
|
|
if (resource_match_string(i, resname, value) >= 0)
|
|
|
|
return i;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_locate(int i, const char *resname)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
|
|
|
if (i < 0)
|
|
|
|
i = 0;
|
|
|
|
else
|
|
|
|
i = i + 1;
|
|
|
|
for (; i < devtab_count; i++)
|
|
|
|
if (!strcmp(devtab[i].name, resname))
|
1998-07-22 08:35:52 +00:00
|
|
|
return i;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
1999-04-16 21:22:55 +00:00
|
|
|
int
|
|
|
|
resource_count(void)
|
|
|
|
{
|
|
|
|
return devtab_count;
|
|
|
|
}
|
|
|
|
|
1998-07-22 08:35:52 +00:00
|
|
|
char *
|
|
|
|
resource_query_name(int i)
|
|
|
|
{
|
|
|
|
return devtab[i].name;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
resource_query_unit(int i)
|
|
|
|
{
|
|
|
|
return devtab[i].unit;
|
|
|
|
}
|
|
|
|
|
1999-04-16 21:22:55 +00:00
|
|
|
static int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_create(const char *name, int unit, const char *resname,
|
|
|
|
resource_type type, struct config_resource **result)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
|
|
|
int i, j;
|
|
|
|
struct config_resource *res = NULL;
|
|
|
|
|
|
|
|
for (i = 0; i < devtab_count; i++) {
|
|
|
|
if (!strcmp(devtab[i].name, name) && devtab[i].unit == unit) {
|
|
|
|
res = devtab[i].resources;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (res == NULL) {
|
|
|
|
i = resource_new_name(name, unit);
|
|
|
|
if (i < 0)
|
|
|
|
return ENOMEM;
|
|
|
|
res = devtab[i].resources;
|
|
|
|
}
|
|
|
|
for (j = 0; j < devtab[i].resource_count; j++, res++) {
|
|
|
|
if (!strcmp(res->name, resname)) {
|
|
|
|
*result = res;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
j = resource_new_resname(i, resname, type);
|
|
|
|
if (j < 0)
|
|
|
|
return ENOMEM;
|
|
|
|
res = &devtab[i].resources[j];
|
|
|
|
*result = res;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_set_int(const char *name, int unit, const char *resname, int value)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
|
|
|
int error;
|
|
|
|
struct config_resource *res;
|
|
|
|
|
1999-05-08 18:08:59 +00:00
|
|
|
error = resource_create(name, unit, resname, RES_INT, &res);
|
1999-04-16 21:22:55 +00:00
|
|
|
if (error)
|
|
|
|
return error;
|
|
|
|
if (res->type != RES_INT)
|
|
|
|
return EFTYPE;
|
|
|
|
res->u.intval = value;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_set_long(const char *name, int unit, const char *resname, long value)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
|
|
|
int error;
|
|
|
|
struct config_resource *res;
|
|
|
|
|
1999-05-08 18:08:59 +00:00
|
|
|
error = resource_create(name, unit, resname, RES_LONG, &res);
|
1999-04-16 21:22:55 +00:00
|
|
|
if (error)
|
|
|
|
return error;
|
|
|
|
if (res->type != RES_LONG)
|
|
|
|
return EFTYPE;
|
|
|
|
res->u.longval = value;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1999-11-18 06:05:30 +00:00
|
|
|
resource_set_string(const char *name, int unit, const char *resname,
|
|
|
|
const char *value)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
|
|
|
int error;
|
|
|
|
struct config_resource *res;
|
|
|
|
|
1999-05-08 18:08:59 +00:00
|
|
|
error = resource_create(name, unit, resname, RES_STRING, &res);
|
1999-04-16 21:22:55 +00:00
|
|
|
if (error)
|
|
|
|
return error;
|
|
|
|
if (res->type != RES_STRING)
|
|
|
|
return EFTYPE;
|
|
|
|
if (res->u.stringval)
|
|
|
|
free(res->u.stringval, M_TEMP);
|
|
|
|
res->u.stringval = malloc(strlen(value) + 1, M_TEMP, M_NOWAIT);
|
|
|
|
if (res->u.stringval == NULL)
|
|
|
|
return ENOMEM;
|
|
|
|
strcpy(res->u.stringval, value);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
/*
|
|
|
|
* We use the identify routine to get the hints for all the other devices.
|
|
|
|
* Strings that are all digits or begin with 0x are integers.
|
|
|
|
*
|
|
|
|
* hint.aha.0.bus_speedup=1
|
|
|
|
* hint.aha.1.irq=10
|
|
|
|
* hint.wl.0.netid=PLUG
|
|
|
|
* hint.wl.1.netid=XYZZY
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
hint_load(char *cp)
|
|
|
|
{
|
|
|
|
char *ep, *op, *walker;
|
|
|
|
int len;
|
|
|
|
int val;
|
|
|
|
char name[20];
|
|
|
|
int unit;
|
|
|
|
char resname[255];
|
|
|
|
|
2000-06-26 09:53:37 +00:00
|
|
|
for (ep = cp; *ep != '=' && *ep != '\0'; ep++)
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
;
|
|
|
|
len = ep - cp;
|
|
|
|
if (*ep == '=')
|
|
|
|
ep++;
|
|
|
|
if (strncmp(cp, "hint.", 5) != 0)
|
|
|
|
return;
|
|
|
|
walker = cp;
|
|
|
|
walker += 5;
|
|
|
|
op = walker;
|
|
|
|
while (*walker && *walker != '.')
|
|
|
|
walker++;
|
|
|
|
if (*walker != '.')
|
|
|
|
return;
|
|
|
|
if (walker - op > sizeof(name))
|
|
|
|
return;
|
|
|
|
strncpy(name, op, walker - op);
|
|
|
|
name[walker - op] = '\0';
|
|
|
|
walker++;
|
|
|
|
op = walker;
|
|
|
|
while (*walker && *walker != '.')
|
|
|
|
walker++;
|
|
|
|
if (*walker != '.')
|
|
|
|
return;
|
2000-06-26 09:53:37 +00:00
|
|
|
unit = strtoul(op, &walker, 0);
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
if (*walker != '.')
|
|
|
|
return;
|
|
|
|
walker++;
|
|
|
|
op = walker;
|
|
|
|
while (*walker && *walker != '=')
|
|
|
|
walker++;
|
|
|
|
if (*walker != '=')
|
|
|
|
return;
|
|
|
|
if (walker - op > sizeof(resname))
|
|
|
|
return;
|
|
|
|
strncpy(resname, op, walker - op);
|
|
|
|
resname[walker - op] = '\0';
|
|
|
|
walker++;
|
|
|
|
if (walker != ep)
|
|
|
|
return;
|
2000-06-15 04:12:17 +00:00
|
|
|
if (bootverbose)
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
printf("Setting %s %d %s to ", name, unit, resname);
|
2000-06-26 09:53:37 +00:00
|
|
|
val = strtoul(ep, &op, 0);
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
if (*ep != '\0' && *op == '\0') {
|
|
|
|
resource_set_int(name, unit, resname, val);
|
2000-06-15 04:12:17 +00:00
|
|
|
if (bootverbose)
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
printf("%d (int)\n", val);
|
|
|
|
} else {
|
|
|
|
resource_set_string(name, unit, resname, ep);
|
2000-06-15 04:12:17 +00:00
|
|
|
if (bootverbose)
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
printf("%s (string)\n", ep);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
1999-04-16 21:22:55 +00:00
|
|
|
|
|
|
|
static void
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
hints_load(void *dummy __unused)
|
1999-04-16 21:22:55 +00:00
|
|
|
{
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
char *cp;
|
|
|
|
|
|
|
|
cp = static_hints;
|
|
|
|
while (cp) {
|
|
|
|
hint_load(cp);
|
2000-06-26 09:53:37 +00:00
|
|
|
while (*cp != '\0')
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
cp++;
|
|
|
|
cp++;
|
2000-06-26 09:53:37 +00:00
|
|
|
if (*cp == '\0')
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
cp = kern_envp;
|
|
|
|
while (cp) {
|
|
|
|
hint_load(cp);
|
2000-06-26 09:53:37 +00:00
|
|
|
while (*cp != '\0')
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
cp++;
|
|
|
|
cp++;
|
2000-06-26 09:53:37 +00:00
|
|
|
if (*cp == '\0')
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
break;
|
1999-04-16 21:22:55 +00:00
|
|
|
}
|
2000-06-15 09:57:20 +00:00
|
|
|
hints_loaded++;
|
1999-04-16 21:22:55 +00:00
|
|
|
}
|
Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
|
|
|
SYSINIT(cfghints, SI_SUB_KMEM, SI_ORDER_ANY + 60, hints_load, 0)
|
1998-07-22 08:35:52 +00:00
|
|
|
|
1999-04-16 21:22:55 +00:00
|
|
|
/*======================================*/
|
1998-06-14 13:46:10 +00:00
|
|
|
/*
|
|
|
|
* Some useful method implementations to make life easier for bus drivers.
|
|
|
|
*/
|
1999-05-14 11:22:47 +00:00
|
|
|
|
1999-05-22 14:57:15 +00:00
|
|
|
void
|
|
|
|
resource_list_init(struct resource_list *rl)
|
|
|
|
{
|
|
|
|
SLIST_INIT(rl);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
resource_list_free(struct resource_list *rl)
|
|
|
|
{
|
|
|
|
struct resource_list_entry *rle;
|
|
|
|
|
|
|
|
while ((rle = SLIST_FIRST(rl)) != NULL) {
|
|
|
|
if (rle->res)
|
|
|
|
panic("resource_list_free: resource entry is busy");
|
|
|
|
SLIST_REMOVE_HEAD(rl, link);
|
1999-09-10 21:11:23 +00:00
|
|
|
free(rle, M_BUS);
|
1999-05-22 14:57:15 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
resource_list_add(struct resource_list *rl,
|
|
|
|
int type, int rid,
|
|
|
|
u_long start, u_long end, u_long count)
|
|
|
|
{
|
|
|
|
struct resource_list_entry *rle;
|
|
|
|
|
|
|
|
rle = resource_list_find(rl, type, rid);
|
|
|
|
if (!rle) {
|
1999-09-10 21:11:23 +00:00
|
|
|
rle = malloc(sizeof(struct resource_list_entry), M_BUS, M_NOWAIT);
|
1999-05-22 14:57:15 +00:00
|
|
|
if (!rle)
|
|
|
|
panic("resource_list_add: can't record entry");
|
|
|
|
SLIST_INSERT_HEAD(rl, rle, link);
|
|
|
|
rle->type = type;
|
|
|
|
rle->rid = rid;
|
|
|
|
rle->res = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (rle->res)
|
|
|
|
panic("resource_list_add: resource entry is busy");
|
|
|
|
|
|
|
|
rle->start = start;
|
|
|
|
rle->end = end;
|
|
|
|
rle->count = count;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct resource_list_entry*
|
|
|
|
resource_list_find(struct resource_list *rl,
|
|
|
|
int type, int rid)
|
|
|
|
{
|
|
|
|
struct resource_list_entry *rle;
|
|
|
|
|
|
|
|
SLIST_FOREACH(rle, rl, link)
|
|
|
|
if (rle->type == type && rle->rid == rid)
|
|
|
|
return rle;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
1999-05-30 10:27:11 +00:00
|
|
|
resource_list_delete(struct resource_list *rl,
|
1999-05-22 14:57:15 +00:00
|
|
|
int type, int rid)
|
|
|
|
{
|
|
|
|
struct resource_list_entry *rle = resource_list_find(rl, type, rid);
|
|
|
|
|
|
|
|
if (rle) {
|
2000-05-26 02:09:24 +00:00
|
|
|
SLIST_REMOVE(rl, rle, resource_list_entry, link);
|
1999-09-10 21:11:23 +00:00
|
|
|
free(rle, M_BUS);
|
1999-05-22 14:57:15 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
struct resource *
|
* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
|
|
|
resource_list_alloc(struct resource_list *rl,
|
|
|
|
device_t bus, device_t child,
|
1999-05-22 14:57:15 +00:00
|
|
|
int type, int *rid,
|
|
|
|
u_long start, u_long end,
|
|
|
|
u_long count, u_int flags)
|
|
|
|
{
|
|
|
|
struct resource_list_entry *rle = 0;
|
|
|
|
int passthrough = (device_get_parent(child) != bus);
|
|
|
|
int isdefault = (start == 0UL && end == ~0UL);
|
|
|
|
|
|
|
|
if (passthrough) {
|
|
|
|
return BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
|
|
|
|
type, rid,
|
|
|
|
start, end, count, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
rle = resource_list_find(rl, type, *rid);
|
|
|
|
|
|
|
|
if (!rle)
|
|
|
|
return 0; /* no resource of that type/rid */
|
|
|
|
if (rle->res)
|
|
|
|
panic("resource_list_alloc: resource entry is busy");
|
|
|
|
|
|
|
|
if (isdefault) {
|
|
|
|
start = rle->start;
|
|
|
|
count = max(count, rle->count);
|
|
|
|
end = max(rle->end, start + count - 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
rle->res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
|
|
|
|
type, rid, start, end, count, flags);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Record the new range.
|
|
|
|
*/
|
|
|
|
if (rle->res) {
|
|
|
|
rle->start = rman_get_start(rle->res);
|
|
|
|
rle->end = rman_get_end(rle->res);
|
|
|
|
rle->count = count;
|
|
|
|
}
|
|
|
|
|
|
|
|
return rle->res;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
|
|
|
resource_list_release(struct resource_list *rl,
|
|
|
|
device_t bus, device_t child,
|
1999-05-22 14:57:15 +00:00
|
|
|
int type, int rid, struct resource *res)
|
|
|
|
{
|
|
|
|
struct resource_list_entry *rle = 0;
|
|
|
|
int passthrough = (device_get_parent(child) != bus);
|
|
|
|
int error;
|
|
|
|
|
|
|
|
if (passthrough) {
|
|
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
|
|
|
|
type, rid, res);
|
|
|
|
}
|
|
|
|
|
|
|
|
rle = resource_list_find(rl, type, rid);
|
|
|
|
|
|
|
|
if (!rle)
|
|
|
|
panic("resource_list_release: can't find resource");
|
|
|
|
if (!rle->res)
|
|
|
|
panic("resource_list_release: resource entry is not busy");
|
|
|
|
|
|
|
|
error = BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
|
|
|
|
type, rid, res);
|
|
|
|
if (error)
|
|
|
|
return error;
|
|
|
|
|
|
|
|
rle->res = NULL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1999-05-14 11:22:47 +00:00
|
|
|
/*
|
|
|
|
* Call DEVICE_IDENTIFY for each driver.
|
|
|
|
*/
|
|
|
|
int
|
|
|
|
bus_generic_probe(device_t dev)
|
|
|
|
{
|
|
|
|
devclass_t dc = dev->devclass;
|
|
|
|
driverlink_t dl;
|
|
|
|
|
|
|
|
for (dl = TAILQ_FIRST(&dc->drivers); dl; dl = TAILQ_NEXT(dl, link))
|
|
|
|
DEVICE_IDENTIFY(dl->driver, dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
int
|
|
|
|
bus_generic_attach(device_t dev)
|
|
|
|
{
|
|
|
|
device_t child;
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children);
|
|
|
|
child; child = TAILQ_NEXT(child, link))
|
|
|
|
device_probe_and_attach(child);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_generic_detach(device_t dev)
|
|
|
|
{
|
|
|
|
device_t child;
|
1998-10-27 09:21:43 +00:00
|
|
|
int error;
|
1998-06-14 13:46:10 +00:00
|
|
|
|
|
|
|
if (dev->state != DS_ATTACHED)
|
|
|
|
return EBUSY;
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children);
|
|
|
|
child; child = TAILQ_NEXT(child, link))
|
1999-01-27 21:50:00 +00:00
|
|
|
if ((error = device_detach(child)) != 0)
|
1998-10-27 09:21:43 +00:00
|
|
|
return error;
|
1998-06-14 13:46:10 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_generic_shutdown(device_t dev)
|
|
|
|
{
|
|
|
|
device_t child;
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children);
|
|
|
|
child; child = TAILQ_NEXT(child, link))
|
1999-04-16 21:22:55 +00:00
|
|
|
device_shutdown(child);
|
1998-06-14 13:46:10 +00:00
|
|
|
|
|
|
|
return 0;
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
1998-11-14 21:58:51 +00:00
|
|
|
int
|
|
|
|
bus_generic_suspend(device_t dev)
|
|
|
|
{
|
|
|
|
int error;
|
|
|
|
device_t child, child2;
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children);
|
|
|
|
child; child = TAILQ_NEXT(child, link)) {
|
|
|
|
error = DEVICE_SUSPEND(child);
|
|
|
|
if (error) {
|
|
|
|
for (child2 = TAILQ_FIRST(&dev->children);
|
|
|
|
child2 && child2 != child;
|
|
|
|
child2 = TAILQ_NEXT(child2, link))
|
|
|
|
DEVICE_RESUME(child2);
|
|
|
|
return (error);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_generic_resume(device_t dev)
|
|
|
|
{
|
|
|
|
device_t child;
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children);
|
|
|
|
child; child = TAILQ_NEXT(child, link)) {
|
|
|
|
DEVICE_RESUME(child);
|
|
|
|
/* if resume fails, there's nothing we can usefully do... */
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1999-07-29 01:03:04 +00:00
|
|
|
int
|
|
|
|
bus_print_child_header (device_t dev, device_t child)
|
|
|
|
{
|
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
if (device_get_desc(child)) {
|
|
|
|
retval += device_printf(child, "<%s>",
|
|
|
|
device_get_desc(child));
|
|
|
|
} else {
|
1999-07-29 01:51:49 +00:00
|
|
|
retval += printf("%s", device_get_nameunit(child));
|
1999-07-29 01:03:04 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return (retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_print_child_footer (device_t dev, device_t child)
|
|
|
|
{
|
|
|
|
return(printf(" on %s\n", device_get_nameunit(dev)));
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1998-06-14 13:46:10 +00:00
|
|
|
bus_generic_print_child(device_t dev, device_t child)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1999-07-29 01:03:04 +00:00
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
retval += bus_print_child_header(dev, child);
|
|
|
|
retval += bus_print_child_footer(dev, child);
|
|
|
|
|
|
|
|
return (retval);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1998-11-14 21:58:51 +00:00
|
|
|
bus_generic_read_ivar(device_t dev, device_t child, int index,
|
|
|
|
uintptr_t * result)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
return ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1998-11-14 21:58:51 +00:00
|
|
|
bus_generic_write_ivar(device_t dev, device_t child, int index,
|
|
|
|
uintptr_t value)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
return ENOENT;
|
|
|
|
}
|
|
|
|
|
1999-04-16 21:22:55 +00:00
|
|
|
void
|
|
|
|
bus_generic_driver_added(device_t dev, driver_t *driver)
|
|
|
|
{
|
|
|
|
device_t child;
|
|
|
|
|
1999-10-09 03:48:18 +00:00
|
|
|
DEVICE_IDENTIFY(driver, dev);
|
1999-04-16 21:22:55 +00:00
|
|
|
for (child = TAILQ_FIRST(&dev->children);
|
|
|
|
child; child = TAILQ_NEXT(child, link))
|
|
|
|
if (child->state == DS_NOTPRESENT)
|
|
|
|
device_probe_and_attach(child);
|
|
|
|
}
|
|
|
|
|
1998-11-14 21:58:51 +00:00
|
|
|
int
|
|
|
|
bus_generic_setup_intr(device_t dev, device_t child, struct resource *irq,
|
1999-05-08 21:59:43 +00:00
|
|
|
int flags, driver_intr_t *intr, void *arg,
|
|
|
|
void **cookiep)
|
1998-07-12 16:20:52 +00:00
|
|
|
{
|
1998-11-14 21:58:51 +00:00
|
|
|
/* Propagate up the bus hierarchy until someone handles it. */
|
|
|
|
if (dev->parent)
|
1999-05-08 21:59:43 +00:00
|
|
|
return (BUS_SETUP_INTR(dev->parent, child, irq, flags,
|
|
|
|
intr, arg, cookiep));
|
1998-11-14 21:58:51 +00:00
|
|
|
else
|
|
|
|
return (EINVAL);
|
1998-07-12 16:20:52 +00:00
|
|
|
}
|
|
|
|
|
1998-06-10 10:57:29 +00:00
|
|
|
int
|
1998-11-14 21:58:51 +00:00
|
|
|
bus_generic_teardown_intr(device_t dev, device_t child, struct resource *irq,
|
|
|
|
void *cookie)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1998-11-14 21:58:51 +00:00
|
|
|
/* Propagate up the bus hierarchy until someone handles it. */
|
|
|
|
if (dev->parent)
|
1999-01-16 17:44:09 +00:00
|
|
|
return (BUS_TEARDOWN_INTR(dev->parent, child, irq, cookie));
|
|
|
|
else
|
|
|
|
return (EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct resource *
|
|
|
|
bus_generic_alloc_resource(device_t dev, device_t child, int type, int *rid,
|
|
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
|
|
{
|
|
|
|
/* Propagate up the bus hierarchy until someone handles it. */
|
|
|
|
if (dev->parent)
|
|
|
|
return (BUS_ALLOC_RESOURCE(dev->parent, child, type, rid,
|
|
|
|
start, end, count, flags));
|
|
|
|
else
|
|
|
|
return (NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_generic_release_resource(device_t dev, device_t child, int type, int rid,
|
|
|
|
struct resource *r)
|
|
|
|
{
|
|
|
|
/* Propagate up the bus hierarchy until someone handles it. */
|
|
|
|
if (dev->parent)
|
|
|
|
return (BUS_RELEASE_RESOURCE(dev->parent, child, type, rid,
|
|
|
|
r));
|
1998-11-14 21:58:51 +00:00
|
|
|
else
|
|
|
|
return (EINVAL);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
1998-11-14 21:58:51 +00:00
|
|
|
int
|
|
|
|
bus_generic_activate_resource(device_t dev, device_t child, int type, int rid,
|
|
|
|
struct resource *r)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
1998-11-14 21:58:51 +00:00
|
|
|
/* Propagate up the bus hierarchy until someone handles it. */
|
|
|
|
if (dev->parent)
|
|
|
|
return (BUS_ACTIVATE_RESOURCE(dev->parent, child, type, rid,
|
|
|
|
r));
|
|
|
|
else
|
|
|
|
return (EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_generic_deactivate_resource(device_t dev, device_t child, int type,
|
|
|
|
int rid, struct resource *r)
|
|
|
|
{
|
|
|
|
/* Propagate up the bus hierarchy until someone handles it. */
|
|
|
|
if (dev->parent)
|
|
|
|
return (BUS_DEACTIVATE_RESOURCE(dev->parent, child, type, rid,
|
|
|
|
r));
|
|
|
|
else
|
|
|
|
return (EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Some convenience functions to make it easier for drivers to use the
|
|
|
|
* resource-management functions. All these really do is hide the
|
|
|
|
* indirection through the parent's method table, making for slightly
|
|
|
|
* less-wordy code. In the future, it might make sense for this code
|
|
|
|
* to maintain some sort of a list of resources allocated by each device.
|
|
|
|
*/
|
|
|
|
struct resource *
|
|
|
|
bus_alloc_resource(device_t dev, int type, int *rid, u_long start, u_long end,
|
|
|
|
u_long count, u_int flags)
|
|
|
|
{
|
|
|
|
if (dev->parent == 0)
|
|
|
|
return (0);
|
|
|
|
return (BUS_ALLOC_RESOURCE(dev->parent, dev, type, rid, start, end,
|
|
|
|
count, flags));
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_activate_resource(device_t dev, int type, int rid, struct resource *r)
|
|
|
|
{
|
|
|
|
if (dev->parent == 0)
|
|
|
|
return (EINVAL);
|
|
|
|
return (BUS_ACTIVATE_RESOURCE(dev->parent, dev, type, rid, r));
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_deactivate_resource(device_t dev, int type, int rid, struct resource *r)
|
|
|
|
{
|
|
|
|
if (dev->parent == 0)
|
|
|
|
return (EINVAL);
|
|
|
|
return (BUS_DEACTIVATE_RESOURCE(dev->parent, dev, type, rid, r));
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_release_resource(device_t dev, int type, int rid, struct resource *r)
|
|
|
|
{
|
|
|
|
if (dev->parent == 0)
|
|
|
|
return (EINVAL);
|
|
|
|
return (BUS_RELEASE_RESOURCE(dev->parent, dev,
|
|
|
|
type, rid, r));
|
|
|
|
}
|
|
|
|
|
1999-03-29 08:54:20 +00:00
|
|
|
int
|
1999-05-08 21:59:43 +00:00
|
|
|
bus_setup_intr(device_t dev, struct resource *r, int flags,
|
1999-03-29 08:54:20 +00:00
|
|
|
driver_intr_t handler, void *arg, void **cookiep)
|
|
|
|
{
|
|
|
|
if (dev->parent == 0)
|
|
|
|
return (EINVAL);
|
1999-05-08 21:59:43 +00:00
|
|
|
return (BUS_SETUP_INTR(dev->parent, dev, r, flags,
|
|
|
|
handler, arg, cookiep));
|
1999-03-29 08:54:20 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_teardown_intr(device_t dev, struct resource *r, void *cookie)
|
|
|
|
{
|
|
|
|
if (dev->parent == 0)
|
|
|
|
return (EINVAL);
|
|
|
|
return (BUS_TEARDOWN_INTR(dev->parent, dev, r, cookie));
|
|
|
|
}
|
|
|
|
|
* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.
* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.
* Simplify driver code by providing wrappers to those methods:
bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);
* Delete isa_get_rsrc and use bus_get_resource_start instead.
* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.
* Print a diagnostic message if we can't assign resources to a PnP
device.
* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
|
|
|
int
|
|
|
|
bus_set_resource(device_t dev, int type, int rid,
|
|
|
|
u_long start, u_long count)
|
|
|
|
{
|
|
|
|
return BUS_SET_RESOURCE(device_get_parent(dev), dev, type, rid,
|
|
|
|
start, count);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
bus_get_resource(device_t dev, int type, int rid,
|
|
|
|
u_long *startp, u_long *countp)
|
|
|
|
{
|
|
|
|
return BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
|
|
|
|
startp, countp);
|
|
|
|
}
|
|
|
|
|
|
|
|
u_long
|
|
|
|
bus_get_resource_start(device_t dev, int type, int rid)
|
|
|
|
{
|
|
|
|
u_long start, count;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
|
|
|
|
&start, &count);
|
|
|
|
if (error)
|
|
|
|
return 0;
|
|
|
|
return start;
|
|
|
|
}
|
|
|
|
|
|
|
|
u_long
|
|
|
|
bus_get_resource_count(device_t dev, int type, int rid)
|
|
|
|
{
|
|
|
|
u_long start, count;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
error = BUS_GET_RESOURCE(device_get_parent(dev), dev, type, rid,
|
|
|
|
&start, &count);
|
|
|
|
if (error)
|
|
|
|
return 0;
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
bus_delete_resource(device_t dev, int type, int rid)
|
|
|
|
{
|
|
|
|
BUS_DELETE_RESOURCE(device_get_parent(dev), dev, type, rid);
|
|
|
|
}
|
|
|
|
|
1999-07-29 01:03:04 +00:00
|
|
|
static int
|
1999-01-16 17:44:09 +00:00
|
|
|
root_print_child(device_t dev, device_t child)
|
|
|
|
{
|
1999-07-29 01:03:04 +00:00
|
|
|
return (0);
|
1999-01-16 17:44:09 +00:00
|
|
|
}
|
|
|
|
|
1998-11-14 21:58:51 +00:00
|
|
|
static int
|
|
|
|
root_setup_intr(device_t dev, device_t child, driver_intr_t *intr, void *arg,
|
|
|
|
void **cookiep)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* If an interrupt mapping gets to here something bad has happened.
|
|
|
|
*/
|
|
|
|
panic("root_setup_intr");
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
2000-04-08 14:17:18 +00:00
|
|
|
static kobj_method_t root_methods[] = {
|
1998-11-14 21:58:51 +00:00
|
|
|
/* Device interface */
|
2000-04-08 14:17:18 +00:00
|
|
|
KOBJMETHOD(device_shutdown, bus_generic_shutdown),
|
|
|
|
KOBJMETHOD(device_suspend, bus_generic_suspend),
|
|
|
|
KOBJMETHOD(device_resume, bus_generic_resume),
|
1998-11-14 21:58:51 +00:00
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
/* Bus interface */
|
2000-04-08 14:17:18 +00:00
|
|
|
KOBJMETHOD(bus_print_child, root_print_child),
|
|
|
|
KOBJMETHOD(bus_read_ivar, bus_generic_read_ivar),
|
|
|
|
KOBJMETHOD(bus_write_ivar, bus_generic_write_ivar),
|
|
|
|
KOBJMETHOD(bus_setup_intr, root_setup_intr),
|
1998-06-14 13:46:10 +00:00
|
|
|
|
|
|
|
{ 0, 0 }
|
|
|
|
};
|
|
|
|
|
|
|
|
static driver_t root_driver = {
|
|
|
|
"root",
|
|
|
|
root_methods,
|
|
|
|
1, /* no softc */
|
1998-06-10 10:57:29 +00:00
|
|
|
};
|
|
|
|
|
1998-11-14 21:58:51 +00:00
|
|
|
device_t root_bus;
|
|
|
|
devclass_t root_devclass;
|
1998-06-10 10:57:29 +00:00
|
|
|
|
|
|
|
static int
|
1998-11-14 21:58:51 +00:00
|
|
|
root_bus_module_handler(module_t mod, int what, void* arg)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
switch (what) {
|
|
|
|
case MOD_LOAD:
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_class_compile((kobj_class_t) &root_driver);
|
1999-12-03 09:10:04 +00:00
|
|
|
root_bus = make_device(NULL, "root", 0);
|
1998-10-27 09:21:43 +00:00
|
|
|
root_bus->desc = "System root bus";
|
2000-04-08 14:17:18 +00:00
|
|
|
kobj_init((kobj_t) root_bus, (kobj_class_t) &root_driver);
|
1998-06-14 13:46:10 +00:00
|
|
|
root_bus->driver = &root_driver;
|
|
|
|
root_bus->state = DS_ATTACHED;
|
1998-10-27 09:21:43 +00:00
|
|
|
root_devclass = devclass_find_internal("root", FALSE);
|
1998-06-10 10:57:29 +00:00
|
|
|
return 0;
|
1999-04-16 21:22:55 +00:00
|
|
|
|
|
|
|
case MOD_SHUTDOWN:
|
|
|
|
device_shutdown(root_bus);
|
|
|
|
return 0;
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static moduledata_t root_bus_mod = {
|
|
|
|
"rootbus",
|
|
|
|
root_bus_module_handler,
|
|
|
|
0
|
|
|
|
};
|
|
|
|
DECLARE_MODULE(rootbus, root_bus_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);
|
|
|
|
|
|
|
|
void
|
1998-11-14 21:58:51 +00:00
|
|
|
root_bus_configure(void)
|
1998-06-10 10:57:29 +00:00
|
|
|
{
|
|
|
|
device_t dev;
|
|
|
|
|
1998-10-27 09:21:43 +00:00
|
|
|
PDEBUG(("."));
|
|
|
|
|
1998-06-14 13:46:10 +00:00
|
|
|
for (dev = TAILQ_FIRST(&root_bus->children); dev;
|
1998-06-10 10:57:29 +00:00
|
|
|
dev = TAILQ_NEXT(dev, link)) {
|
|
|
|
device_probe_and_attach(dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
1998-11-14 21:58:51 +00:00
|
|
|
driver_module_handler(module_t mod, int what, void *arg)
|
|
|
|
{
|
|
|
|
int error, i;
|
|
|
|
struct driver_module_data *dmd;
|
|
|
|
devclass_t bus_devclass;
|
|
|
|
|
|
|
|
dmd = (struct driver_module_data *)arg;
|
|
|
|
bus_devclass = devclass_find_internal(dmd->dmd_busname, TRUE);
|
|
|
|
error = 0;
|
|
|
|
|
|
|
|
switch (what) {
|
|
|
|
case MOD_LOAD:
|
1999-08-16 21:44:14 +00:00
|
|
|
if (dmd->dmd_chainevh)
|
|
|
|
error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg);
|
|
|
|
|
1998-11-14 21:58:51 +00:00
|
|
|
for (i = 0; !error && i < dmd->dmd_ndrivers; i++) {
|
|
|
|
PDEBUG(("Loading module: driver %s on bus %s",
|
1998-12-12 11:30:04 +00:00
|
|
|
DRIVERNAME(dmd->dmd_drivers[i]),
|
1998-11-14 21:58:51 +00:00
|
|
|
dmd->dmd_busname));
|
|
|
|
error = devclass_add_driver(bus_devclass,
|
|
|
|
dmd->dmd_drivers[i]);
|
|
|
|
}
|
|
|
|
if (error)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The drivers loaded in this way are assumed to all
|
|
|
|
* implement the same devclass.
|
|
|
|
*/
|
|
|
|
*dmd->dmd_devclass =
|
|
|
|
devclass_find_internal(dmd->dmd_drivers[0]->name,
|
|
|
|
TRUE);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MOD_UNLOAD:
|
|
|
|
for (i = 0; !error && i < dmd->dmd_ndrivers; i++) {
|
|
|
|
PDEBUG(("Unloading module: driver %s from bus %s",
|
|
|
|
DRIVERNAME(dmd->dmd_drivers[i]),
|
|
|
|
dmd->dmd_busname));
|
|
|
|
error = devclass_delete_driver(bus_devclass,
|
|
|
|
dmd->dmd_drivers[i]);
|
|
|
|
}
|
1999-08-16 21:44:14 +00:00
|
|
|
|
|
|
|
if (!error && dmd->dmd_chainevh)
|
|
|
|
error = dmd->dmd_chainevh(mod,what,dmd->dmd_chainarg);
|
1998-11-14 21:58:51 +00:00
|
|
|
break;
|
|
|
|
}
|
1998-06-10 10:57:29 +00:00
|
|
|
|
1998-11-14 21:58:51 +00:00
|
|
|
return (error);
|
1998-06-10 10:57:29 +00:00
|
|
|
}
|
1998-10-27 09:21:43 +00:00
|
|
|
|
|
|
|
#ifdef BUS_DEBUG
|
|
|
|
|
|
|
|
/* the _short versions avoid iteration by not calling anything that prints
|
|
|
|
* more than oneliners. I love oneliners.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_device_short(device_t dev, int indent)
|
|
|
|
{
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
1999-08-11 22:55:39 +00:00
|
|
|
indentprintf(("device %d: <%s> %sparent,%schildren,%s%s%s%s,%sivars,%ssoftc,busy=%d\n",
|
1998-10-27 09:21:43 +00:00
|
|
|
dev->unit, dev->desc,
|
|
|
|
(dev->parent? "":"no "),
|
|
|
|
(TAILQ_EMPTY(&dev->children)? "no ":""),
|
|
|
|
(dev->flags&DF_ENABLED? "enabled,":"disabled,"),
|
|
|
|
(dev->flags&DF_FIXEDCLASS? "fixed,":""),
|
|
|
|
(dev->flags&DF_WILDCARD? "wildcard,":""),
|
1999-03-29 08:54:20 +00:00
|
|
|
(dev->flags&DF_DESCMALLOCED? "descmalloced,":""),
|
1998-10-27 09:21:43 +00:00
|
|
|
(dev->ivars? "":"no "),
|
|
|
|
(dev->softc? "":"no "),
|
|
|
|
dev->busy));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_device(device_t dev, int indent)
|
|
|
|
{
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
|
|
|
print_device_short(dev, indent);
|
|
|
|
|
|
|
|
indentprintf(("Parent:\n"));
|
|
|
|
print_device_short(dev->parent, indent+1);
|
|
|
|
indentprintf(("Driver:\n"));
|
|
|
|
print_driver_short(dev->driver, indent+1);
|
|
|
|
indentprintf(("Devclass:\n"));
|
|
|
|
print_devclass_short(dev->devclass, indent+1);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
print_device_tree_short(device_t dev, int indent)
|
|
|
|
/* print the device and all its children (indented) */
|
|
|
|
{
|
|
|
|
device_t child;
|
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
|
|
|
print_device_short(dev, indent);
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children); child;
|
|
|
|
child = TAILQ_NEXT(child, link))
|
|
|
|
print_device_tree_short(child, indent+1);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
print_device_tree(device_t dev, int indent)
|
|
|
|
/* print the device and all its children (indented) */
|
|
|
|
{
|
|
|
|
device_t child;
|
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
|
|
|
print_device(dev, indent);
|
|
|
|
|
|
|
|
for (child = TAILQ_FIRST(&dev->children); child;
|
|
|
|
child = TAILQ_NEXT(child, link))
|
|
|
|
print_device_tree(child, indent+1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_driver_short(driver_t *driver, int indent)
|
|
|
|
{
|
|
|
|
if (!driver)
|
|
|
|
return;
|
|
|
|
|
1999-08-11 22:05:17 +00:00
|
|
|
indentprintf(("driver %s: softc size = %d\n",
|
2000-04-17 08:09:43 +00:00
|
|
|
driver->name, driver->size));
|
1998-10-27 09:21:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_driver(driver_t *driver, int indent)
|
|
|
|
{
|
|
|
|
if (!driver)
|
|
|
|
return;
|
|
|
|
|
|
|
|
print_driver_short(driver, indent);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_driver_list(driver_list_t drivers, int indent)
|
|
|
|
{
|
1999-08-11 22:55:39 +00:00
|
|
|
driverlink_t driver;
|
1998-10-27 09:21:43 +00:00
|
|
|
|
|
|
|
for (driver = TAILQ_FIRST(&drivers); driver;
|
|
|
|
driver = TAILQ_NEXT(driver, link))
|
1999-08-11 22:55:39 +00:00
|
|
|
print_driver(driver->driver, indent);
|
1998-10-27 09:21:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_devclass_short(devclass_t dc, int indent)
|
|
|
|
{
|
|
|
|
if ( !dc )
|
|
|
|
return;
|
|
|
|
|
2000-03-16 09:32:59 +00:00
|
|
|
indentprintf(("devclass %s: max units = %d\n",
|
|
|
|
dc->name, dc->maxunit));
|
1998-10-27 09:21:43 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
print_devclass(devclass_t dc, int indent)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if ( !dc )
|
|
|
|
return;
|
|
|
|
|
|
|
|
print_devclass_short(dc, indent);
|
|
|
|
indentprintf(("Drivers:\n"));
|
|
|
|
print_driver_list(dc->drivers, indent+1);
|
|
|
|
|
|
|
|
indentprintf(("Devices:\n"));
|
|
|
|
for (i = 0; i < dc->maxunit; i++)
|
|
|
|
if (dc->devices[i])
|
|
|
|
print_device(dc->devices[i], indent+1);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
print_devclass_list_short(void)
|
|
|
|
{
|
|
|
|
devclass_t dc;
|
|
|
|
|
|
|
|
printf("Short listing of devclasses, drivers & devices:\n");
|
|
|
|
for (dc = TAILQ_FIRST(&devclasses); dc; dc = TAILQ_NEXT(dc, link))
|
|
|
|
print_devclass_short(dc, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
print_devclass_list(void)
|
|
|
|
{
|
|
|
|
devclass_t dc;
|
|
|
|
|
|
|
|
printf("Full listing of devclasses, drivers & devices:\n");
|
|
|
|
for (dc = TAILQ_FIRST(&devclasses); dc; dc = TAILQ_NEXT(dc, link))
|
|
|
|
print_devclass(dc, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|