freebsd-nq/sys/dev/netmap/netmap.c

2555 lines
70 KiB
C
Raw Normal View History

Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Copyright (C) 2011-2013 Matteo Landi, Luigi Rizzo. All rights reserved.
*
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
* documentation and/or other materials provided with the distribution.
*
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#define NM_BRIDGE
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* This module supports memory mapped access to network devices,
* see netmap(4).
*
* The module uses a large, memory pool allocated by the kernel
* and accessible as mmapped memory by multiple userspace threads/processes.
* The memory pool contains packet buffers and "netmap rings",
* i.e. user-accessible copies of the interface's queues.
*
* Access to the network card works like this:
* 1. a process/thread issues one or more open() on /dev/netmap, to create
* select()able file descriptor on which events are reported.
* 2. on each descriptor, the process issues an ioctl() to identify
* the interface that should report events to the file descriptor.
* 3. on each descriptor, the process issues an mmap() request to
* map the shared memory region within the process' address space.
* The list of interesting queues is indicated by a location in
* the shared memory region.
* 4. using the functions in the netmap(4) userspace API, a process
* can look up the occupation state of a queue, access memory buffers,
* and retrieve received packets or enqueue packets to transmit.
* 5. using some ioctl()s the process can synchronize the userspace view
* of the queue with the actual status in the kernel. This includes both
* receiving the notification of new packets, and transmitting new
* packets on the output interface.
* 6. select() or poll() can be used to wait for events on individual
* transmit or receive queues (or all queues for a given interface).
*/
#ifdef linux
#include "bsd_glue.h"
static netdev_tx_t linux_netmap_start(struct sk_buff *skb, struct net_device *dev);
#endif /* linux */
#ifdef __APPLE__
#include "osx_glue.h"
#endif /* __APPLE__ */
#ifdef __FreeBSD__
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#include <sys/cdefs.h> /* prerequisite */
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/module.h>
#include <sys/errno.h>
#include <sys/param.h> /* defines used in kernel.h */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
#include <sys/jail.h>
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#include <sys/kernel.h> /* types used in module initialization */
#include <sys/conf.h> /* cdevsw struct */
#include <sys/uio.h> /* uio struct */
#include <sys/sockio.h>
#include <sys/socketvar.h> /* struct socket */
#include <sys/malloc.h>
#include <sys/mman.h> /* PROT_EXEC */
#include <sys/poll.h>
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
#include <sys/proc.h>
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
#include <sys/rwlock.h>
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#include <vm/vm.h> /* vtophys */
#include <vm/pmap.h> /* vtophys */
#include <sys/socket.h> /* sockaddrs */
#include <machine/bus.h>
#include <sys/selinfo.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/bpf.h> /* BIOCIMMEDIATE */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
#include <net/vnet.h>
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#include <machine/bus.h> /* bus_dmamap_* */
MALLOC_DEFINE(M_NETMAP, "netmap", "Network memory map");
#endif /* __FreeBSD__ */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#include <net/netmap.h>
#include <dev/netmap/netmap_kern.h>
/* XXX the following variables must be deprecated and included in nm_mem */
u_int netmap_total_buffers;
u_int netmap_buf_size;
char *netmap_buffer_base; /* address of an invalid buffer */
/* user-controlled variables */
int netmap_verbose;
static int netmap_no_timestamp; /* don't timestamp on rxsync */
SYSCTL_NODE(_dev, OID_AUTO, netmap, CTLFLAG_RW, 0, "Netmap args");
SYSCTL_INT(_dev_netmap, OID_AUTO, verbose,
CTLFLAG_RW, &netmap_verbose, 0, "Verbose mode");
SYSCTL_INT(_dev_netmap, OID_AUTO, no_timestamp,
CTLFLAG_RW, &netmap_no_timestamp, 0, "no_timestamp");
int netmap_mitigate = 1;
SYSCTL_INT(_dev_netmap, OID_AUTO, mitigate, CTLFLAG_RW, &netmap_mitigate, 0, "");
int netmap_no_pendintr = 1;
SYSCTL_INT(_dev_netmap, OID_AUTO, no_pendintr,
CTLFLAG_RW, &netmap_no_pendintr, 0, "Always look for new received packets.");
int netmap_drop = 0; /* debugging */
int netmap_flags = 0; /* debug flags */
int netmap_fwd = 0; /* force transparent mode */
SYSCTL_INT(_dev_netmap, OID_AUTO, drop, CTLFLAG_RW, &netmap_drop, 0 , "");
SYSCTL_INT(_dev_netmap, OID_AUTO, flags, CTLFLAG_RW, &netmap_flags, 0 , "");
SYSCTL_INT(_dev_netmap, OID_AUTO, fwd, CTLFLAG_RW, &netmap_fwd, 0 , "");
#ifdef NM_BRIDGE /* support for netmap bridge */
/*
* system parameters.
*
* All switched ports have prefix NM_NAME.
* The switch has a max of NM_BDG_MAXPORTS ports (often stored in a bitmap,
* so a practical upper bound is 64).
* Each tx ring is read-write, whereas rx rings are readonly (XXX not done yet).
* The virtual interfaces use per-queue lock instead of core lock.
* In the tx loop, we aggregate traffic in batches to make all operations
* faster. The batch size is NM_BDG_BATCH
*/
#define NM_NAME "vale" /* prefix for the interface */
#define NM_BDG_MAXPORTS 16 /* up to 64 ? */
#define NM_BRIDGE_RINGSIZE 1024 /* in the device */
#define NM_BDG_HASH 1024 /* forwarding table entries */
#define NM_BDG_BATCH 1024 /* entries in the forwarding buffer */
#define NM_BRIDGES 4 /* number of bridges */
int netmap_bridge = NM_BDG_BATCH; /* bridge batch size */
SYSCTL_INT(_dev_netmap, OID_AUTO, bridge, CTLFLAG_RW, &netmap_bridge, 0 , "");
#ifdef linux
#define refcount_acquire(_a) atomic_add(1, (atomic_t *)_a)
#define refcount_release(_a) atomic_dec_and_test((atomic_t *)_a)
#else /* !linux */
#ifdef __FreeBSD__
#include <sys/endian.h>
#include <sys/refcount.h>
#endif /* __FreeBSD__ */
#define prefetch(x) __builtin_prefetch(x)
#endif /* !linux */
/*
* These are used to handle reference counters for bridge ports.
*/
#define ADD_BDG_REF(ifp) refcount_acquire(&NA(ifp)->na_bdg_refcount)
#define DROP_BDG_REF(ifp) refcount_release(&NA(ifp)->na_bdg_refcount)
static void bdg_netmap_attach(struct ifnet *ifp);
static int bdg_netmap_reg(struct ifnet *ifp, int onoff);
/* per-tx-queue entry */
struct nm_bdg_fwd { /* forwarding entry for a bridge */
void *buf;
uint64_t dst; /* dst mask */
uint32_t src; /* src index ? */
uint16_t len; /* src len */
};
struct nm_hash_ent {
uint64_t mac; /* the top 2 bytes are the epoch */
uint64_t ports;
};
/*
* Interfaces for a bridge are all in bdg_ports[].
* The array has fixed size, an empty entry does not terminate
* the search. But lookups only occur on attach/detach so we
* don't mind if they are slow.
*
* The bridge is non blocking on the transmit ports.
*
* bdg_lock protects accesses to the bdg_ports array.
*/
struct nm_bridge {
struct ifnet *bdg_ports[NM_BDG_MAXPORTS];
int n_ports;
uint64_t act_ports;
int freelist; /* first buffer index */
NM_SELINFO_T si; /* poll/select wait queue */
NM_LOCK_T bdg_lock; /* protect the selinfo ? */
/* the forwarding table, MAC+ports */
struct nm_hash_ent ht[NM_BDG_HASH];
int namelen; /* 0 means free */
char basename[IFNAMSIZ];
};
struct nm_bridge nm_bridges[NM_BRIDGES];
#define BDG_LOCK(b) mtx_lock(&(b)->bdg_lock)
#define BDG_UNLOCK(b) mtx_unlock(&(b)->bdg_lock)
/*
* NA(ifp)->bdg_port port index
*/
// XXX only for multiples of 64 bytes, non overlapped.
static inline void
pkt_copy(void *_src, void *_dst, int l)
{
uint64_t *src = _src;
uint64_t *dst = _dst;
if (unlikely(l >= 1024)) {
bcopy(src, dst, l);
return;
}
for (; likely(l > 0); l-=64) {
*dst++ = *src++;
*dst++ = *src++;
*dst++ = *src++;
*dst++ = *src++;
*dst++ = *src++;
*dst++ = *src++;
*dst++ = *src++;
*dst++ = *src++;
}
}
/*
* locate a bridge among the existing ones.
* a ':' in the name terminates the bridge name. Otherwise, just NM_NAME.
* We assume that this is called with a name of at least NM_NAME chars.
*/
static struct nm_bridge *
nm_find_bridge(const char *name)
{
int i, l, namelen, e;
struct nm_bridge *b = NULL;
namelen = strlen(NM_NAME); /* base length */
l = strlen(name); /* actual length */
for (i = namelen + 1; i < l; i++) {
if (name[i] == ':') {
namelen = i;
break;
}
}
if (namelen >= IFNAMSIZ)
namelen = IFNAMSIZ;
ND("--- prefix is '%.*s' ---", namelen, name);
/* use the first entry for locking */
BDG_LOCK(nm_bridges); // XXX do better
for (e = -1, i = 1; i < NM_BRIDGES; i++) {
b = nm_bridges + i;
if (b->namelen == 0)
e = i; /* record empty slot */
else if (strncmp(name, b->basename, namelen) == 0) {
ND("found '%.*s' at %d", namelen, name, i);
break;
}
}
if (i == NM_BRIDGES) { /* all full */
if (e == -1) { /* no empty slot */
b = NULL;
} else {
b = nm_bridges + e;
strncpy(b->basename, name, namelen);
b->namelen = namelen;
}
}
BDG_UNLOCK(nm_bridges);
return b;
}
#endif /* NM_BRIDGE */
/*
* Fetch configuration from the device, to cope with dynamic
* reconfigurations after loading the module.
*/
static int
netmap_update_config(struct netmap_adapter *na)
{
struct ifnet *ifp = na->ifp;
u_int txr, txd, rxr, rxd;
txr = txd = rxr = rxd = 0;
if (na->nm_config) {
na->nm_config(ifp, &txr, &txd, &rxr, &rxd);
} else {
/* take whatever we had at init time */
txr = na->num_tx_rings;
txd = na->num_tx_desc;
rxr = na->num_rx_rings;
rxd = na->num_rx_desc;
}
if (na->num_tx_rings == txr && na->num_tx_desc == txd &&
na->num_rx_rings == rxr && na->num_rx_desc == rxd)
return 0; /* nothing changed */
if (netmap_verbose || na->refcount > 0) {
D("stored config %s: txring %d x %d, rxring %d x %d",
ifp->if_xname,
na->num_tx_rings, na->num_tx_desc,
na->num_rx_rings, na->num_rx_desc);
D("new config %s: txring %d x %d, rxring %d x %d",
ifp->if_xname, txr, txd, rxr, rxd);
}
if (na->refcount == 0) {
D("configuration changed (but fine)");
na->num_tx_rings = txr;
na->num_tx_desc = txd;
na->num_rx_rings = rxr;
na->num_rx_desc = rxd;
return 0;
}
D("configuration changed while active, this is bad...");
return 1;
}
/*------------- memory allocator -----------------*/
#include "netmap_mem2.c"
/*------------ end of memory allocator ----------*/
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* Structure associated to each thread which registered an interface.
*
* The first 4 fields of this structure are written by NIOCREGIF and
* read by poll() and NIOC?XSYNC.
* There is low contention among writers (actually, a correct user program
* should have no contention among writers) and among writers and readers,
* so we use a single global lock to protect the structure initialization.
* Since initialization involves the allocation of memory, we reuse the memory
* allocator lock.
* Read access to the structure is lock free. Readers must check that
* np_nifp is not NULL before using the other fields.
* If np_nifp is NULL initialization has not been performed, so they should
* return an error to userlevel.
*
* The ref_done field is used to regulate access to the refcount in the
* memory allocator. The refcount must be incremented at most once for
* each open("/dev/netmap"). The increment is performed by the first
* function that calls netmap_get_memory() (currently called by
* mmap(), NIOCGINFO and NIOCREGIF).
* If the refcount is incremented, it is then decremented when the
* private structure is destroyed.
*/
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_priv_d {
struct netmap_if * volatile np_nifp; /* netmap interface descriptor. */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct ifnet *np_ifp; /* device for which we hold a reference */
int np_ringid; /* from the ioctl */
u_int np_qfirst, np_qlast; /* range of rings to scan */
uint16_t np_txpoll;
unsigned long ref_done; /* use with NMA_LOCK held */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
};
static int
netmap_get_memory(struct netmap_priv_d* p)
{
int error = 0;
NMA_LOCK();
if (!p->ref_done) {
error = netmap_memory_finalize();
if (!error)
p->ref_done = 1;
}
NMA_UNLOCK();
return error;
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* File descriptor's private data destructor.
*
* Call nm_register(ifp,0) to stop netmap mode on the interface and
* revert to normal operation. We expect that np_ifp has not gone.
*/
/* call with NMA_LOCK held */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
static void
netmap_dtor_locked(void *data)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct netmap_priv_d *priv = data;
struct ifnet *ifp = priv->np_ifp;
struct netmap_adapter *na = NA(ifp);
struct netmap_if *nifp = priv->np_nifp;
na->refcount--;
if (na->refcount <= 0) { /* last instance */
u_int i, j, lim;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (netmap_verbose)
D("deleting last instance for %s", ifp->if_xname);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* there is a race here with *_netmap_task() and
* netmap_poll(), which don't run under NETMAP_REG_LOCK.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
* na->refcount == 0 && na->ifp->if_capenable & IFCAP_NETMAP
* (aka NETMAP_DELETING(na)) are a unique marker that the
* device is dying.
* Before destroying stuff we sleep a bit, and then complete
* the job. NIOCREG should realize the condition and
* loop until they can continue; the other routines
* should check the condition at entry and quit if
* they cannot run.
*/
na->nm_lock(ifp, NETMAP_REG_UNLOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
tsleep(na, 0, "NIOCUNREG", 4);
na->nm_lock(ifp, NETMAP_REG_LOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
na->nm_register(ifp, 0); /* off, clear IFCAP_NETMAP */
/* Wake up any sleeping threads. netmap_poll will
* then return POLLERR
*/
for (i = 0; i < na->num_tx_rings + 1; i++)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
selwakeuppri(&na->tx_rings[i].si, PI_NET);
for (i = 0; i < na->num_rx_rings + 1; i++)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
selwakeuppri(&na->rx_rings[i].si, PI_NET);
selwakeuppri(&na->tx_si, PI_NET);
selwakeuppri(&na->rx_si, PI_NET);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* release all buffers */
for (i = 0; i < na->num_tx_rings + 1; i++) {
struct netmap_ring *ring = na->tx_rings[i].ring;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
lim = na->tx_rings[i].nkr_num_slots;
for (j = 0; j < lim; j++)
netmap_free_buf(nifp, ring->slot[j].buf_idx);
/* knlist_destroy(&na->tx_rings[i].si.si_note); */
mtx_destroy(&na->tx_rings[i].q_lock);
}
for (i = 0; i < na->num_rx_rings + 1; i++) {
struct netmap_ring *ring = na->rx_rings[i].ring;
lim = na->rx_rings[i].nkr_num_slots;
for (j = 0; j < lim; j++)
netmap_free_buf(nifp, ring->slot[j].buf_idx);
/* knlist_destroy(&na->rx_rings[i].si.si_note); */
mtx_destroy(&na->rx_rings[i].q_lock);
}
/* XXX kqueue(9) needed; these will mirror knlist_init. */
/* knlist_destroy(&na->tx_si.si_note); */
/* knlist_destroy(&na->rx_si.si_note); */
netmap_free_rings(na);
wakeup(na);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
netmap_if_free(nifp);
}
static void
nm_if_rele(struct ifnet *ifp)
{
#ifndef NM_BRIDGE
if_rele(ifp);
#else /* NM_BRIDGE */
int i, full;
struct nm_bridge *b;
if (strncmp(ifp->if_xname, NM_NAME, sizeof(NM_NAME) - 1)) {
if_rele(ifp);
return;
}
if (!DROP_BDG_REF(ifp))
return;
b = ifp->if_bridge;
BDG_LOCK(nm_bridges);
BDG_LOCK(b);
ND("want to disconnect %s from the bridge", ifp->if_xname);
full = 0;
for (i = 0; i < NM_BDG_MAXPORTS; i++) {
if (b->bdg_ports[i] == ifp) {
b->bdg_ports[i] = NULL;
bzero(ifp, sizeof(*ifp));
free(ifp, M_DEVBUF);
break;
}
else if (b->bdg_ports[i] != NULL)
full = 1;
}
BDG_UNLOCK(b);
if (full == 0) {
ND("freeing bridge %d", b - nm_bridges);
b->namelen = 0;
}
BDG_UNLOCK(nm_bridges);
if (i == NM_BDG_MAXPORTS)
D("ouch, cannot find ifp to remove");
#endif /* NM_BRIDGE */
}
static void
netmap_dtor(void *data)
{
struct netmap_priv_d *priv = data;
struct ifnet *ifp = priv->np_ifp;
NMA_LOCK();
if (ifp) {
struct netmap_adapter *na = NA(ifp);
na->nm_lock(ifp, NETMAP_REG_LOCK, 0);
netmap_dtor_locked(data);
na->nm_lock(ifp, NETMAP_REG_UNLOCK, 0);
nm_if_rele(ifp); /* might also destroy *na */
}
if (priv->ref_done) {
netmap_memory_deref();
}
NMA_UNLOCK();
bzero(priv, sizeof(*priv)); /* XXX for safety */
free(priv, M_DEVBUF);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
#ifdef __FreeBSD__
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pager.h>
#include <vm/uma.h>
static struct cdev_pager_ops saved_cdev_pager_ops;
static int
netmap_dev_pager_ctor(void *handle, vm_ooffset_t size, vm_prot_t prot,
vm_ooffset_t foff, struct ucred *cred, u_short *color)
{
if (netmap_verbose)
D("first mmap for %p", handle);
return saved_cdev_pager_ops.cdev_pg_ctor(handle,
size, prot, foff, cred, color);
}
static void
netmap_dev_pager_dtor(void *handle)
{
saved_cdev_pager_ops.cdev_pg_dtor(handle);
ND("ready to release memory for %p", handle);
}
static struct cdev_pager_ops netmap_cdev_pager_ops = {
.cdev_pg_ctor = netmap_dev_pager_ctor,
.cdev_pg_dtor = netmap_dev_pager_dtor,
.cdev_pg_fault = NULL,
};
static int
netmap_mmap_single(struct cdev *cdev, vm_ooffset_t *foff,
vm_size_t objsize, vm_object_t *objp, int prot)
{
vm_object_t obj;
ND("cdev %p foff %jd size %jd objp %p prot %d", cdev,
2012-10-19 09:41:45 +00:00
(intmax_t )*foff, (intmax_t )objsize, objp, prot);
obj = vm_pager_allocate(OBJT_DEVICE, cdev, objsize, prot, *foff,
curthread->td_ucred);
ND("returns obj %p", obj);
if (obj == NULL)
return EINVAL;
if (saved_cdev_pager_ops.cdev_pg_fault == NULL) {
ND("initialize cdev_pager_ops");
saved_cdev_pager_ops = *(obj->un_pager.devp.ops);
netmap_cdev_pager_ops.cdev_pg_fault =
saved_cdev_pager_ops.cdev_pg_fault;
};
obj->un_pager.devp.ops = &netmap_cdev_pager_ops;
*objp = obj;
return 0;
}
#endif /* __FreeBSD__ */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* mmap(2) support for the "netmap" device.
*
* Expose all the memory previously allocated by our custom memory
* allocator: this way the user has only to issue a single mmap(2), and
* can work on all the data structures flawlessly.
*
* Return 0 on success, -1 otherwise.
*/
#ifdef __FreeBSD__
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
static int
netmap_mmap(__unused struct cdev *dev,
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#if __FreeBSD_version < 900000
vm_offset_t offset, vm_paddr_t *paddr, int nprot
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#else
vm_ooffset_t offset, vm_paddr_t *paddr, int nprot,
__unused vm_memattr_t *memattr
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#endif
)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
int error = 0;
struct netmap_priv_d *priv;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (nprot & PROT_EXEC)
return (-1); // XXX -1 or EINVAL ?
error = devfs_get_cdevpriv((void **)&priv);
if (error == EBADF) { /* called on fault, memory is initialized */
ND(5, "handling fault at ofs 0x%x", offset);
error = 0;
} else if (error == 0) /* make sure memory is set */
error = netmap_get_memory(priv);
if (error)
return (error);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
ND("request for offset 0x%x", (uint32_t)offset);
*paddr = netmap_ofstophys(offset);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return (*paddr ? 0 : ENOMEM);
}
static int
netmap_close(struct cdev *dev, int fflag, int devtype, struct thread *td)
{
if (netmap_verbose)
D("dev %p fflag 0x%x devtype %d td %p",
dev, fflag, devtype, td);
return 0;
}
static int
netmap_open(struct cdev *dev, int oflags, int devtype, struct thread *td)
{
struct netmap_priv_d *priv;
int error;
priv = malloc(sizeof(struct netmap_priv_d), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (priv == NULL)
return ENOMEM;
error = devfs_set_cdevpriv(priv, netmap_dtor);
if (error)
return error;
return 0;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
#endif /* __FreeBSD__ */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Handlers for synchronization of the queues from/to the host.
* Netmap has two operating modes:
* - in the default mode, the rings connected to the host stack are
* just another ring pair managed by userspace;
* - in transparent mode (XXX to be defined) incoming packets
* (from the host or the NIC) are marked as NS_FORWARD upon
* arrival, and the user application has a chance to reset the
* flag for packets that should be dropped.
* On the RXSYNC or poll(), packets in RX rings between
* kring->nr_kcur and ring->cur with NS_FORWARD still set are moved
* to the other side.
* The transfer NIC --> host is relatively easy, just encapsulate
* into mbufs and we are done. The host --> NIC side is slightly
* harder because there might not be room in the tx ring so it
* might take a while before releasing the buffer.
*/
/*
* pass a chain of buffers to the host stack as coming from 'dst'
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
static void
netmap_send_up(struct ifnet *dst, struct mbuf *head)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct mbuf *m;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* send packets up, outside the lock */
while ((m = head) != NULL) {
head = head->m_nextpkt;
m->m_nextpkt = NULL;
if (netmap_verbose & NM_VERB_HOST)
D("sending up pkt %p size %d", m, MBUF_LEN(m));
NM_SEND_UP(dst, m);
}
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct mbq {
struct mbuf *head;
struct mbuf *tail;
int count;
};
/*
* put a copy of the buffers marked NS_FORWARD into an mbuf chain.
* Run from hwcur to cur - reserved
*/
static void
netmap_grab_packets(struct netmap_kring *kring, struct mbq *q, int force)
{
/* Take packets from hwcur to cur-reserved and pass them up.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
* In case of no buffers we give up. At the end of the loop,
* the queue is drained in all cases.
* XXX handle reserved
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
int k = kring->ring->cur - kring->ring->reserved;
u_int n, lim = kring->nkr_num_slots - 1;
struct mbuf *m, *tail = q->tail;
if (k < 0)
k = k + kring->nkr_num_slots;
for (n = kring->nr_hwcur; n != k;) {
struct netmap_slot *slot = &kring->ring->slot[n];
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
n = (n == lim) ? 0 : n + 1;
if ((slot->flags & NS_FORWARD) == 0 && !force)
continue;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (slot->len < 14 || slot->len > NETMAP_BUF_SIZE) {
D("bad pkt at %d len %d", n, slot->len);
continue;
}
slot->flags &= ~NS_FORWARD; // XXX needed ?
m = m_devget(NMB(slot), slot->len, 0, kring->na->ifp, NULL);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (m == NULL)
break;
if (tail)
tail->m_nextpkt = m;
else
q->head = m;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
tail = m;
q->count++;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
m->m_nextpkt = NULL;
}
q->tail = tail;
}
/*
* called under main lock to send packets from the host to the NIC
* The host ring has packets from nr_hwcur to (cur - reserved)
* to be sent down. We scan the tx rings, which have just been
* flushed so nr_hwcur == cur. Pushing packets down means
* increment cur and decrement avail.
* XXX to be verified
*/
static void
netmap_sw_to_nic(struct netmap_adapter *na)
{
struct netmap_kring *kring = &na->rx_rings[na->num_rx_rings];
struct netmap_kring *k1 = &na->tx_rings[0];
int i, howmany, src_lim, dst_lim;
howmany = kring->nr_hwavail; /* XXX otherwise cur - reserved - nr_hwcur */
src_lim = kring->nkr_num_slots;
for (i = 0; howmany > 0 && i < na->num_tx_rings; i++, k1++) {
ND("%d packets left to ring %d (space %d)", howmany, i, k1->nr_hwavail);
dst_lim = k1->nkr_num_slots;
while (howmany > 0 && k1->ring->avail > 0) {
struct netmap_slot *src, *dst, tmp;
src = &kring->ring->slot[kring->nr_hwcur];
dst = &k1->ring->slot[k1->ring->cur];
tmp = *src;
src->buf_idx = dst->buf_idx;
src->flags = NS_BUF_CHANGED;
dst->buf_idx = tmp.buf_idx;
dst->len = tmp.len;
dst->flags = NS_BUF_CHANGED;
ND("out len %d buf %d from %d to %d",
dst->len, dst->buf_idx,
kring->nr_hwcur, k1->ring->cur);
if (++kring->nr_hwcur >= src_lim)
kring->nr_hwcur = 0;
howmany--;
kring->nr_hwavail--;
if (++k1->ring->cur >= dst_lim)
k1->ring->cur = 0;
k1->ring->avail--;
}
kring->ring->cur = kring->nr_hwcur; // XXX
k1++;
}
}
/*
* netmap_sync_to_host() passes packets up. We are called from a
* system call in user process context, and the only contention
* can be among multiple user threads erroneously calling
* this routine concurrently.
*/
static void
netmap_sync_to_host(struct netmap_adapter *na)
{
struct netmap_kring *kring = &na->tx_rings[na->num_tx_rings];
struct netmap_ring *ring = kring->ring;
u_int k, lim = kring->nkr_num_slots - 1;
struct mbq q = { NULL, NULL };
k = ring->cur;
if (k > lim) {
netmap_ring_reinit(kring);
return;
}
// na->nm_lock(na->ifp, NETMAP_CORE_LOCK, 0);
/* Take packets from hwcur to cur and pass them up.
* In case of no buffers we give up. At the end of the loop,
* the queue is drained in all cases.
*/
netmap_grab_packets(kring, &q, 1);
kring->nr_hwcur = k;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
kring->nr_hwavail = ring->avail = lim;
// na->nm_lock(na->ifp, NETMAP_CORE_UNLOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
netmap_send_up(na->ifp, q.head);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/*
* rxsync backend for packets coming from the host stack.
* They have been put in the queue by netmap_start() so we
* need to protect access to the kring using a lock.
*
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
* This routine also does the selrecord if called from the poll handler
* (we know because td != NULL).
*
* NOTE: on linux, selrecord() is defined as a macro and uses pwait
* as an additional hidden argument.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
static void
netmap_sync_from_host(struct netmap_adapter *na, struct thread *td, void *pwait)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct netmap_kring *kring = &na->rx_rings[na->num_rx_rings];
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_ring *ring = kring->ring;
u_int j, n, lim = kring->nkr_num_slots;
u_int k = ring->cur, resvd = ring->reserved;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
(void)pwait; /* disable unused warnings */
na->nm_lock(na->ifp, NETMAP_CORE_LOCK, 0);
if (k >= lim) {
netmap_ring_reinit(kring);
return;
}
/* new packets are already set in nr_hwavail */
/* skip past packets that userspace has released */
j = kring->nr_hwcur;
if (resvd > 0) {
if (resvd + ring->avail >= lim + 1) {
D("XXX invalid reserve/avail %d %d", resvd, ring->avail);
ring->reserved = resvd = 0; // XXX panic...
}
k = (k >= resvd) ? k - resvd : k + lim - resvd;
}
if (j != k) {
n = k >= j ? k - j : k + lim - j;
kring->nr_hwavail -= n;
kring->nr_hwcur = k;
}
k = ring->avail = kring->nr_hwavail - resvd;
if (k == 0 && td)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
selrecord(td, &kring->si);
if (k && (netmap_verbose & NM_VERB_HOST))
D("%d pkts from stack", k);
na->nm_lock(na->ifp, NETMAP_CORE_UNLOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/*
* get a refcounted reference to an interface.
* Return ENXIO if the interface does not exist, EINVAL if netmap
* is not supported by the interface.
* If successful, hold a reference.
*/
static int
get_ifp(const char *name, struct ifnet **ifp)
{
#ifdef NM_BRIDGE
struct ifnet *iter = NULL;
do {
struct nm_bridge *b;
int i, l, cand = -1;
if (strncmp(name, NM_NAME, sizeof(NM_NAME) - 1))
break;
b = nm_find_bridge(name);
if (b == NULL) {
D("no bridges available for '%s'", name);
return (ENXIO);
}
/* XXX locking */
BDG_LOCK(b);
/* lookup in the local list of ports */
for (i = 0; i < NM_BDG_MAXPORTS; i++) {
iter = b->bdg_ports[i];
if (iter == NULL) {
if (cand == -1)
cand = i; /* potential insert point */
continue;
}
if (!strcmp(iter->if_xname, name)) {
ADD_BDG_REF(iter);
ND("found existing interface");
BDG_UNLOCK(b);
break;
}
}
if (i < NM_BDG_MAXPORTS) /* already unlocked */
break;
if (cand == -1) {
D("bridge full, cannot create new port");
no_port:
BDG_UNLOCK(b);
*ifp = NULL;
return EINVAL;
}
ND("create new bridge port %s", name);
/* space for forwarding list after the ifnet */
l = sizeof(*iter) +
sizeof(struct nm_bdg_fwd)*NM_BDG_BATCH ;
iter = malloc(l, M_DEVBUF, M_NOWAIT | M_ZERO);
if (!iter)
goto no_port;
strcpy(iter->if_xname, name);
bdg_netmap_attach(iter);
b->bdg_ports[cand] = iter;
iter->if_bridge = b;
ADD_BDG_REF(iter);
BDG_UNLOCK(b);
ND("attaching virtual bridge %p", b);
} while (0);
*ifp = iter;
if (! *ifp)
#endif /* NM_BRIDGE */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*ifp = ifunit_ref(name);
if (*ifp == NULL)
return (ENXIO);
/* can do this if the capability exists and if_pspare[0]
* points to the netmap descriptor.
*/
if (NETMAP_CAPABLE(*ifp))
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return 0; /* valid pointer, we hold the refcount */
nm_if_rele(*ifp);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return EINVAL; // not NETMAP capable
}
/*
* Error routine called when txsync/rxsync detects an error.
* Can't do much more than resetting cur = hwcur, avail = hwavail.
* Return 1 on reinit.
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
*
* This routine is only called by the upper half of the kernel.
* It only reads hwcur (which is changed only by the upper half, too)
* and hwavail (which may be changed by the lower half, but only on
* a tx ring and only to increase it, so any error will be recovered
* on the next call). For the above, we don't strictly need to call
* it under lock.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
int
netmap_ring_reinit(struct netmap_kring *kring)
{
struct netmap_ring *ring = kring->ring;
u_int i, lim = kring->nkr_num_slots - 1;
int errors = 0;
RD(10, "called for %s", kring->na->ifp->if_xname);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (ring->cur > lim)
errors++;
for (i = 0; i <= lim; i++) {
u_int idx = ring->slot[i].buf_idx;
u_int len = ring->slot[i].len;
if (idx < 2 || idx >= netmap_total_buffers) {
if (!errors++)
D("bad buffer at slot %d idx %d len %d ", i, idx, len);
ring->slot[i].buf_idx = 0;
ring->slot[i].len = 0;
} else if (len > NETMAP_BUF_SIZE) {
ring->slot[i].len = 0;
if (!errors++)
D("bad len %d at slot %d idx %d",
len, i, idx);
}
}
if (errors) {
int pos = kring - kring->na->tx_rings;
int n = kring->na->num_tx_rings + 1;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
RD(10, "total %d errors", errors);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
errors++;
RD(10, "%s %s[%d] reinit, cur %d -> %d avail %d -> %d",
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
kring->na->ifp->if_xname,
pos < n ? "TX" : "RX", pos < n ? pos : pos - n,
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
ring->cur, kring->nr_hwcur,
ring->avail, kring->nr_hwavail);
ring->cur = kring->nr_hwcur;
ring->avail = kring->nr_hwavail;
}
return (errors ? 1 : 0);
}
/*
* Set the ring ID. For devices with a single queue, a request
* for all rings is the same as a single ring.
*/
static int
netmap_set_ringid(struct netmap_priv_d *priv, u_int ringid)
{
struct ifnet *ifp = priv->np_ifp;
struct netmap_adapter *na = NA(ifp);
u_int i = ringid & NETMAP_RING_MASK;
/* initially (np_qfirst == np_qlast) we don't want to lock */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
int need_lock = (priv->np_qfirst != priv->np_qlast);
int lim = na->num_rx_rings;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (na->num_tx_rings > lim)
lim = na->num_tx_rings;
if ( (ringid & NETMAP_HW_RING) && i >= lim) {
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
D("invalid ring id %d", i);
return (EINVAL);
}
if (need_lock)
na->nm_lock(ifp, NETMAP_CORE_LOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
priv->np_ringid = ringid;
if (ringid & NETMAP_SW_RING) {
priv->np_qfirst = NETMAP_SW_RING;
priv->np_qlast = 0;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
} else if (ringid & NETMAP_HW_RING) {
priv->np_qfirst = i;
priv->np_qlast = i + 1;
} else {
priv->np_qfirst = 0;
priv->np_qlast = NETMAP_HW_RING ;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
priv->np_txpoll = (ringid & NETMAP_NO_TX_POLL) ? 0 : 1;
if (need_lock)
na->nm_lock(ifp, NETMAP_CORE_UNLOCK, 0);
if (netmap_verbose) {
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (ringid & NETMAP_SW_RING)
D("ringid %s set to SW RING", ifp->if_xname);
else if (ringid & NETMAP_HW_RING)
D("ringid %s set to HW RING %d", ifp->if_xname,
priv->np_qfirst);
else
D("ringid %s set to all %d HW RINGS", ifp->if_xname, lim);
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return 0;
}
/*
* ioctl(2) support for the "netmap" device.
*
* Following a list of accepted commands:
* - NIOCGINFO
* - SIOCGIFADDR just for convenience
* - NIOCREGIF
* - NIOCUNREGIF
* - NIOCTXSYNC
* - NIOCRXSYNC
*
* Return 0 on success, errno otherwise.
*/
static int
netmap_ioctl(struct cdev *dev, u_long cmd, caddr_t data,
int fflag, struct thread *td)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct netmap_priv_d *priv = NULL;
struct ifnet *ifp;
struct nmreq *nmr = (struct nmreq *) data;
struct netmap_adapter *na;
int error;
u_int i, lim;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_if *nifp;
(void)dev; /* UNUSED */
(void)fflag; /* UNUSED */
#ifdef linux
#define devfs_get_cdevpriv(pp) \
({ *(struct netmap_priv_d **)pp = ((struct file *)td)->private_data; \
(*pp ? 0 : ENOENT); })
/* devfs_set_cdevpriv cannot fail on linux */
#define devfs_set_cdevpriv(p, fn) \
({ ((struct file *)td)->private_data = p; (p ? 0 : EINVAL); })
#define devfs_clear_cdevpriv() do { \
netmap_dtor(priv); ((struct file *)td)->private_data = 0; \
} while (0)
#endif /* linux */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
CURVNET_SET(TD_TO_VNET(td));
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
error = devfs_get_cdevpriv((void **)&priv);
if (error) {
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
CURVNET_RESTORE();
/* XXX ENOENT should be impossible, since the priv
* is now created in the open */
return (error == ENOENT ? ENXIO : error);
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
nmr->nr_name[sizeof(nmr->nr_name) - 1] = '\0'; /* truncate name */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
switch (cmd) {
case NIOCGINFO: /* return capabilities etc */
if (nmr->nr_version != NETMAP_API) {
D("API mismatch got %d have %d",
nmr->nr_version, NETMAP_API);
nmr->nr_version = NETMAP_API;
error = EINVAL;
break;
}
/* update configuration */
error = netmap_get_memory(priv);
ND("get_memory returned %d", error);
if (error)
break;
/* memsize is always valid */
nmr->nr_memsize = nm_mem.nm_totalsize;
nmr->nr_offset = 0;
nmr->nr_rx_rings = nmr->nr_tx_rings = 0;
nmr->nr_rx_slots = nmr->nr_tx_slots = 0;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (nmr->nr_name[0] == '\0') /* just get memory info */
break;
error = get_ifp(nmr->nr_name, &ifp); /* get a refcount */
if (error)
break;
na = NA(ifp); /* retrieve netmap_adapter */
netmap_update_config(na);
nmr->nr_rx_rings = na->num_rx_rings;
nmr->nr_tx_rings = na->num_tx_rings;
nmr->nr_rx_slots = na->num_rx_desc;
nmr->nr_tx_slots = na->num_tx_desc;
nm_if_rele(ifp); /* return the refcount */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
break;
case NIOCREGIF:
if (nmr->nr_version != NETMAP_API) {
nmr->nr_version = NETMAP_API;
error = EINVAL;
break;
}
/* ensure allocators are ready */
error = netmap_get_memory(priv);
ND("get_memory returned %d", error);
if (error)
break;
/* protect access to priv from concurrent NIOCREGIF */
NMA_LOCK();
if (priv->np_ifp != NULL) { /* thread already registered */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
error = netmap_set_ringid(priv, nmr->nr_ringid);
NMA_UNLOCK();
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
break;
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* find the interface and a reference */
error = get_ifp(nmr->nr_name, &ifp); /* keep reference */
if (error) {
NMA_UNLOCK();
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
break;
}
na = NA(ifp); /* retrieve netmap adapter */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
for (i = 10; i > 0; i--) {
na->nm_lock(ifp, NETMAP_REG_LOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (!NETMAP_DELETING(na))
break;
na->nm_lock(ifp, NETMAP_REG_UNLOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
tsleep(na, 0, "NIOCREGIF", hz/10);
}
if (i == 0) {
D("too many NIOCREGIF attempts, give up");
error = EINVAL;
nm_if_rele(ifp); /* return the refcount */
NMA_UNLOCK();
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
break;
}
/* ring configuration may have changed, fetch from the card */
netmap_update_config(na);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
priv->np_ifp = ifp; /* store the reference */
error = netmap_set_ringid(priv, nmr->nr_ringid);
if (error)
goto error;
nifp = netmap_if_new(nmr->nr_name, na);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (nifp == NULL) { /* allocation failed */
error = ENOMEM;
} else if (ifp->if_capenable & IFCAP_NETMAP) {
/* was already set */
} else {
/* Otherwise set the card in netmap mode
* and make it use the shared buffers.
*/
for (i = 0 ; i < na->num_tx_rings + 1; i++)
mtx_init(&na->tx_rings[i].q_lock, "nm_txq_lock", MTX_NETWORK_LOCK, MTX_DEF);
for (i = 0 ; i < na->num_rx_rings + 1; i++) {
mtx_init(&na->rx_rings[i].q_lock, "nm_rxq_lock", MTX_NETWORK_LOCK, MTX_DEF);
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
error = na->nm_register(ifp, 1); /* mode on */
if (error) {
netmap_dtor_locked(priv);
netmap_if_free(nifp);
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
if (error) { /* reg. failed, release priv and ref */
error:
na->nm_lock(ifp, NETMAP_REG_UNLOCK, 0);
nm_if_rele(ifp); /* return the refcount */
priv->np_ifp = NULL;
priv->np_nifp = NULL;
NMA_UNLOCK();
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
break;
}
na->nm_lock(ifp, NETMAP_REG_UNLOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* the following assignment is a commitment.
* Readers (i.e., poll and *SYNC) check for
* np_nifp != NULL without locking
*/
wmb(); /* make sure previous writes are visible to all CPUs */
priv->np_nifp = nifp;
NMA_UNLOCK();
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* return the offset of the netmap_if object */
nmr->nr_rx_rings = na->num_rx_rings;
nmr->nr_tx_rings = na->num_tx_rings;
nmr->nr_rx_slots = na->num_rx_desc;
nmr->nr_tx_slots = na->num_tx_desc;
nmr->nr_memsize = nm_mem.nm_totalsize;
nmr->nr_offset = netmap_if_offset(nifp);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
break;
case NIOCUNREGIF:
// XXX we have no data here ?
D("deprecated, data is %p", nmr);
error = EINVAL;
break;
case NIOCTXSYNC:
case NIOCRXSYNC:
nifp = priv->np_nifp;
if (nifp == NULL) {
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
error = ENXIO;
break;
}
rmb(); /* make sure following reads are not from cache */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
ifp = priv->np_ifp; /* we have a reference */
if (ifp == NULL) {
D("Internal error: nifp != NULL && ifp == NULL");
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
error = ENXIO;
break;
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
na = NA(ifp); /* retrieve netmap adapter */
if (priv->np_qfirst == NETMAP_SW_RING) { /* host rings */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (cmd == NIOCTXSYNC)
netmap_sync_to_host(na);
else
netmap_sync_from_host(na, NULL, NULL);
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
break;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/* find the last ring to scan */
lim = priv->np_qlast;
if (lim == NETMAP_HW_RING)
lim = (cmd == NIOCTXSYNC) ?
na->num_tx_rings : na->num_rx_rings;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
for (i = priv->np_qfirst; i < lim; i++) {
if (cmd == NIOCTXSYNC) {
struct netmap_kring *kring = &na->tx_rings[i];
if (netmap_verbose & NM_VERB_TXSYNC)
D("pre txsync ring %d cur %d hwcur %d",
i, kring->ring->cur,
kring->nr_hwcur);
na->nm_txsync(ifp, i, 1 /* do lock */);
if (netmap_verbose & NM_VERB_TXSYNC)
D("post txsync ring %d cur %d hwcur %d",
i, kring->ring->cur,
kring->nr_hwcur);
} else {
na->nm_rxsync(ifp, i, 1 /* do lock */);
microtime(&na->rx_rings[i].ring->ts);
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
break;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#ifdef __FreeBSD__
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
case BIOCIMMEDIATE:
case BIOCGHDRCMPLT:
case BIOCSHDRCMPLT:
case BIOCSSEESENT:
D("ignore BIOCIMMEDIATE/BIOCSHDRCMPLT/BIOCSHDRCMPLT/BIOCSSEESENT");
break;
default: /* allow device-specific ioctls */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct socket so;
bzero(&so, sizeof(so));
error = get_ifp(nmr->nr_name, &ifp); /* keep reference */
if (error)
break;
so.so_vnet = ifp->if_vnet;
// so->so_proto not null.
error = ifioctl(&so, cmd, data, td);
nm_if_rele(ifp);
break;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
#else /* linux */
default:
error = EOPNOTSUPP;
#endif /* linux */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
CURVNET_RESTORE();
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return (error);
}
/*
* select(2) and poll(2) handlers for the "netmap" device.
*
* Can be called for one or more queues.
* Return true the event mask corresponding to ready events.
* If there are no ready events, do a selrecord on either individual
* selfd or on the global one.
* Device-dependent parts (locking and sync of tx/rx rings)
* are done through callbacks.
*
* On linux, arguments are really pwait, the poll table, and 'td' is struct file *
* The first one is remapped to pwait as selrecord() uses the name as an
* hidden argument.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
static int
netmap_poll(struct cdev *dev, int events, struct thread *td)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct netmap_priv_d *priv = NULL;
struct netmap_adapter *na;
struct ifnet *ifp;
struct netmap_kring *kring;
u_int core_lock, i, check_all, want_tx, want_rx, revents = 0;
u_int lim_tx, lim_rx, host_forwarded = 0;
struct mbq q = { NULL, NULL, 0 };
2012-01-13 11:58:06 +00:00
enum {NO_CL, NEED_CL, LOCKED_CL }; /* see below */
void *pwait = dev; /* linux compatibility */
(void)pwait;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (devfs_get_cdevpriv((void **)&priv) != 0 || priv == NULL)
return POLLERR;
if (priv->np_nifp == NULL) {
D("No if registered");
return POLLERR;
}
rmb(); /* make sure following reads are not from cache */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
ifp = priv->np_ifp;
// XXX check for deleting() ?
if ( (ifp->if_capenable & IFCAP_NETMAP) == 0)
return POLLERR;
if (netmap_verbose & 0x8000)
D("device %s events 0x%x", ifp->if_xname, events);
want_tx = events & (POLLOUT | POLLWRNORM);
want_rx = events & (POLLIN | POLLRDNORM);
na = NA(ifp); /* retrieve netmap adapter */
lim_tx = na->num_tx_rings;
lim_rx = na->num_rx_rings;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* how many queues we are scanning */
if (priv->np_qfirst == NETMAP_SW_RING) {
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (priv->np_txpoll || want_tx) {
/* push any packets up, then we are always ready */
kring = &na->tx_rings[lim_tx];
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
netmap_sync_to_host(na);
revents |= want_tx;
}
if (want_rx) {
kring = &na->rx_rings[lim_rx];
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (kring->ring->avail == 0)
netmap_sync_from_host(na, td, dev);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (kring->ring->avail > 0) {
revents |= want_rx;
}
}
return (revents);
}
/* if we are in transparent mode, check also the host rx ring */
kring = &na->rx_rings[lim_rx];
if ( (priv->np_qlast == NETMAP_HW_RING) // XXX check_all
&& want_rx
&& (netmap_fwd || kring->ring->flags & NR_FORWARD) ) {
if (kring->ring->avail == 0)
netmap_sync_from_host(na, td, dev);
if (kring->ring->avail > 0)
revents |= want_rx;
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* check_all is set if the card has more than one queue and
* the client is polling all of them. If true, we sleep on
* the "global" selfd, otherwise we sleep on individual selfd
* (we can only sleep on one of them per direction).
* The interrupt routine in the driver should always wake on
* the individual selfd, and also on the global one if the card
* has more than one ring.
*
* If the card has only one lock, we just use that.
* If the card has separate ring locks, we just use those
* unless we are doing check_all, in which case the whole
* loop is wrapped by the global lock.
* We acquire locks only when necessary: if poll is called
* when buffers are available, we can just return without locks.
*
* rxsync() is only called if we run out of buffers on a POLLIN.
* txsync() is called if we run out of buffers on POLLOUT, or
* there are pending packets to send. The latter can be disabled
* passing NETMAP_NO_TX_POLL in the NIOCREG call.
*/
check_all = (priv->np_qlast == NETMAP_HW_RING) && (lim_tx > 1 || lim_rx > 1);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* core_lock indicates what to do with the core lock.
* The core lock is used when either the card has no individual
* locks, or it has individual locks but we are cheking all
* rings so we need the core lock to avoid missing wakeup events.
*
* It has three possible states:
* NO_CL we don't need to use the core lock, e.g.
* because we are protected by individual locks.
* NEED_CL we need the core lock. In this case, when we
* call the lock routine, move to LOCKED_CL
* to remember to release the lock once done.
* LOCKED_CL core lock is set, so we need to release it.
*/
2012-01-13 11:58:06 +00:00
core_lock = (check_all || !na->separate_locks) ? NEED_CL : NO_CL;
#ifdef NM_BRIDGE
/* the bridge uses separate locks */
if (na->nm_register == bdg_netmap_reg) {
ND("not using core lock for %s", ifp->if_xname);
core_lock = NO_CL;
}
#endif /* NM_BRIDGE */
if (priv->np_qlast != NETMAP_HW_RING) {
lim_tx = lim_rx = priv->np_qlast;
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* We start with a lock free round which is good if we have
* data available. If this fails, then lock and call the sync
* routines.
*/
for (i = priv->np_qfirst; want_rx && i < lim_rx; i++) {
kring = &na->rx_rings[i];
if (kring->ring->avail > 0) {
revents |= want_rx;
want_rx = 0; /* also breaks the loop */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
}
for (i = priv->np_qfirst; want_tx && i < lim_tx; i++) {
kring = &na->tx_rings[i];
if (kring->ring->avail > 0) {
revents |= want_tx;
want_tx = 0; /* also breaks the loop */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* If we to push packets out (priv->np_txpoll) or want_tx is
* still set, we do need to run the txsync calls (on all rings,
* to avoid that the tx rings stall).
*/
if (priv->np_txpoll || want_tx) {
flush_tx:
for (i = priv->np_qfirst; i < lim_tx; i++) {
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
kring = &na->tx_rings[i];
/*
* Skip the current ring if want_tx == 0
* (we have already done a successful sync on
* a previous ring) AND kring->cur == kring->hwcur
* (there are no pending transmissions for this ring).
*/
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (!want_tx && kring->ring->cur == kring->nr_hwcur)
continue;
if (core_lock == NEED_CL) {
na->nm_lock(ifp, NETMAP_CORE_LOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
core_lock = LOCKED_CL;
}
if (na->separate_locks)
na->nm_lock(ifp, NETMAP_TX_LOCK, i);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (netmap_verbose & NM_VERB_TXSYNC)
D("send %d on %s %d",
kring->ring->cur,
ifp->if_xname, i);
if (na->nm_txsync(ifp, i, 0 /* no lock */))
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
revents |= POLLERR;
/* Check avail/call selrecord only if called with POLLOUT */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (want_tx) {
if (kring->ring->avail > 0) {
/* stop at the first ring. We don't risk
* starvation.
*/
revents |= want_tx;
want_tx = 0;
} else if (!check_all)
selrecord(td, &kring->si);
}
if (na->separate_locks)
na->nm_lock(ifp, NETMAP_TX_UNLOCK, i);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
}
/*
* now if want_rx is still set we need to lock and rxsync.
* Do it on all rings because otherwise we starve.
*/
if (want_rx) {
for (i = priv->np_qfirst; i < lim_rx; i++) {
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
kring = &na->rx_rings[i];
if (core_lock == NEED_CL) {
na->nm_lock(ifp, NETMAP_CORE_LOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
core_lock = LOCKED_CL;
}
if (na->separate_locks)
na->nm_lock(ifp, NETMAP_RX_LOCK, i);
if (netmap_fwd ||kring->ring->flags & NR_FORWARD) {
ND(10, "forwarding some buffers up %d to %d",
kring->nr_hwcur, kring->ring->cur);
netmap_grab_packets(kring, &q, netmap_fwd);
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (na->nm_rxsync(ifp, i, 0 /* no lock */))
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
revents |= POLLERR;
if (netmap_no_timestamp == 0 ||
kring->ring->flags & NR_TIMESTAMP) {
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
microtime(&kring->ring->ts);
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (kring->ring->avail > 0)
revents |= want_rx;
else if (!check_all)
selrecord(td, &kring->si);
if (na->separate_locks)
na->nm_lock(ifp, NETMAP_RX_UNLOCK, i);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
}
if (check_all && revents == 0) { /* signal on the global queue */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (want_tx)
selrecord(td, &na->tx_si);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (want_rx)
selrecord(td, &na->rx_si);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/* forward host to the netmap ring */
kring = &na->rx_rings[lim_rx];
if (kring->nr_hwavail > 0)
ND("host rx %d has %d packets", lim_rx, kring->nr_hwavail);
if ( (priv->np_qlast == NETMAP_HW_RING) // XXX check_all
&& (netmap_fwd || kring->ring->flags & NR_FORWARD)
&& kring->nr_hwavail > 0 && !host_forwarded) {
if (core_lock == NEED_CL) {
na->nm_lock(ifp, NETMAP_CORE_LOCK, 0);
core_lock = LOCKED_CL;
}
netmap_sw_to_nic(na);
host_forwarded = 1; /* prevent another pass */
want_rx = 0;
goto flush_tx;
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (core_lock == LOCKED_CL)
na->nm_lock(ifp, NETMAP_CORE_UNLOCK, 0);
if (q.head)
netmap_send_up(na->ifp, q.head);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return (revents);
}
/*------- driver support routines ------*/
/*
* default lock wrapper.
*/
static void
netmap_lock_wrapper(struct ifnet *dev, int what, u_int queueid)
{
struct netmap_adapter *na = NA(dev);
switch (what) {
#ifdef linux /* some system do not need lock on register */
case NETMAP_REG_LOCK:
case NETMAP_REG_UNLOCK:
break;
#endif /* linux */
case NETMAP_CORE_LOCK:
mtx_lock(&na->core_lock);
break;
case NETMAP_CORE_UNLOCK:
mtx_unlock(&na->core_lock);
break;
case NETMAP_TX_LOCK:
mtx_lock(&na->tx_rings[queueid].q_lock);
break;
case NETMAP_TX_UNLOCK:
mtx_unlock(&na->tx_rings[queueid].q_lock);
break;
case NETMAP_RX_LOCK:
mtx_lock(&na->rx_rings[queueid].q_lock);
break;
case NETMAP_RX_UNLOCK:
mtx_unlock(&na->rx_rings[queueid].q_lock);
break;
}
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Initialize a ``netmap_adapter`` object created by driver on attach.
* We allocate a block of memory with room for a struct netmap_adapter
* plus two sets of N+2 struct netmap_kring (where N is the number
* of hardware rings):
* krings 0..N-1 are for the hardware queues.
* kring N is for the host stack queue
* kring N+1 is only used for the selinfo for all queues.
* Return 0 on success, ENOMEM otherwise.
*
2012-08-08 15:28:29 +00:00
* By default the receive and transmit adapter ring counts are both initialized
* to num_queues. na->num_tx_rings can be set for cards with different tx/rx
* setups.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
int
netmap_attach(struct netmap_adapter *arg, int num_queues)
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
{
struct netmap_adapter *na = NULL;
struct ifnet *ifp = arg ? arg->ifp : NULL;
if (arg == NULL || ifp == NULL)
goto fail;
na = malloc(sizeof(*na), M_DEVBUF, M_NOWAIT | M_ZERO);
if (na == NULL)
goto fail;
WNA(ifp) = na;
*na = *arg; /* copy everything, trust the driver to not pass junk */
NETMAP_SET_CAPABLE(ifp);
if (na->num_tx_rings == 0)
na->num_tx_rings = num_queues;
na->num_rx_rings = num_queues;
na->refcount = na->na_single = na->na_multi = 0;
/* Core lock initialized here, others after netmap_if_new. */
mtx_init(&na->core_lock, "netmap core lock", MTX_NETWORK_LOCK, MTX_DEF);
if (na->nm_lock == NULL) {
ND("using default locks for %s", ifp->if_xname);
na->nm_lock = netmap_lock_wrapper;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
#ifdef linux
if (!ifp->netdev_ops) {
D("ouch, we cannot override netdev_ops");
goto fail;
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
/* if needed, prepare a clone of the entire netdev ops */
na->nm_ndo = *ifp->netdev_ops;
#endif /* 2.6.28 and above */
na->nm_ndo.ndo_start_xmit = linux_netmap_start;
#endif /* linux */
D("success for %s", ifp->if_xname);
return 0;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
fail:
D("fail, arg %p ifp %p na %p", arg, ifp, na);
netmap_detach(ifp);
return (na ? EINVAL : ENOMEM);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/*
* Free the allocated memory linked to the given ``netmap_adapter``
* object.
*/
void
netmap_detach(struct ifnet *ifp)
{
struct netmap_adapter *na = NA(ifp);
if (!na)
return;
mtx_destroy(&na->core_lock);
if (na->tx_rings) { /* XXX should not happen */
D("freeing leftover tx_rings");
free(na->tx_rings, M_DEVBUF);
}
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
bzero(na, sizeof(*na));
WNA(ifp) = NULL;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
free(na, M_DEVBUF);
}
/*
* Intercept packets from the network stack and pass them
* to netmap as incoming packets on the 'software' ring.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
* We are not locked when called.
*/
int
netmap_start(struct ifnet *ifp, struct mbuf *m)
{
struct netmap_adapter *na = NA(ifp);
struct netmap_kring *kring = &na->rx_rings[na->num_rx_rings];
u_int i, len = MBUF_LEN(m);
u_int error = EBUSY, lim = kring->nkr_num_slots - 1;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
struct netmap_slot *slot;
if (netmap_verbose & NM_VERB_HOST)
D("%s packet %d len %d from the stack", ifp->if_xname,
kring->nr_hwcur + kring->nr_hwavail, len);
if (len > NETMAP_BUF_SIZE) { /* too long for us */
D("%s from_host, drop packet size %d > %d", ifp->if_xname,
len, NETMAP_BUF_SIZE);
m_freem(m);
return EINVAL;
}
na->nm_lock(ifp, NETMAP_CORE_LOCK, 0);
if (kring->nr_hwavail >= lim) {
if (netmap_verbose)
D("stack ring %s full\n", ifp->if_xname);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
goto done; /* no space */
}
/* compute the insert position */
i = kring->nr_hwcur + kring->nr_hwavail;
if (i > lim)
i -= lim + 1;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
slot = &kring->ring->slot[i];
m_copydata(m, 0, len, NMB(slot));
slot->len = len;
slot->flags = kring->nkr_slot_flags;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
kring->nr_hwavail++;
if (netmap_verbose & NM_VERB_HOST)
D("wake up host ring %s %d", na->ifp->if_xname, na->num_rx_rings);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
selwakeuppri(&kring->si, PI_NET);
error = 0;
done:
na->nm_lock(ifp, NETMAP_CORE_UNLOCK, 0);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/* release the mbuf in either cases of success or failure. As an
* alternative, put the mbuf in a free list and free the list
* only when really necessary.
*/
m_freem(m);
return (error);
}
/*
* netmap_reset() is called by the driver routines when reinitializing
* a ring. The driver is in charge of locking to protect the kring.
* If netmap mode is not set just return NULL.
*/
struct netmap_slot *
netmap_reset(struct netmap_adapter *na, enum txrx tx, int n,
u_int new_cur)
{
struct netmap_kring *kring;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
int new_hwofs, lim;
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
if (na == NULL)
return NULL; /* no netmap support here */
if (!(na->ifp->if_capenable & IFCAP_NETMAP))
return NULL; /* nothing to reinitialize */
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
if (tx == NR_TX) {
if (n >= na->num_tx_rings)
return NULL;
kring = na->tx_rings + n;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
new_hwofs = kring->nr_hwcur - new_cur;
} else {
if (n >= na->num_rx_rings)
return NULL;
kring = na->rx_rings + n;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
new_hwofs = kring->nr_hwcur + kring->nr_hwavail - new_cur;
}
lim = kring->nkr_num_slots - 1;
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
if (new_hwofs > lim)
new_hwofs -= lim + 1;
/* Alwayws set the new offset value and realign the ring. */
kring->nkr_hwofs = new_hwofs;
if (tx == NR_TX)
kring->nr_hwavail = kring->nkr_num_slots - 1;
ND(10, "new hwofs %d on %s %s[%d]",
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
kring->nkr_hwofs, na->ifp->if_xname,
tx == NR_TX ? "TX" : "RX", n);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
#if 0 // def linux
/* XXX check that the mappings are correct */
/* need ring_nr, adapter->pdev, direction */
buffer_info->dma = dma_map_single(&pdev->dev, addr, adapter->rx_buffer_len, DMA_FROM_DEVICE);
if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) {
D("error mapping rx netmap buffer %d", i);
// XXX fix error handling
}
#endif /* linux */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Wakeup on the individual and global lock
1. Fix the handling of link reset while in netmap more. A link reset now is completely transparent for the netmap client: even if the NIC resets its own ring (e.g. restarting from 0), the client will not see any change in the current rx/tx positions, because the driver will keep track of the offset between the two. 2. make the device-specific code more uniform across different drivers There were some inconsistencies in the implementation of the netmap support routines, now drivers have been aligned to a common code structure. 3. import netmap support for ixgbe . This is implemented as a very small patch for ixgbe.c (233 lines, 11 chunks, mostly comments: in total the patch has only 54 lines of new code) , as most of the code is in an external file sys/dev/netmap/ixgbe_netmap.h , following some initial comments from Jack Vogel about making changes less intrusive. (Note, i have emailed Jack multiple times asking if he had comments on this structure of the code; i got no reply so i assume he is fine with it). Support for other drivers (em, lem, re, igb) will come later. "ixgbe" is now the reference driver for netmap support. Both the external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should serve as a reference for other device drivers. Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap, the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz on an i7-860 with 4 cores and 82599 card. Haven't tried yet more aggressive optimizations such as adding 'prefetch' instructions in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00
* We do the wakeup here, but the ring is not yet reconfigured.
* However, we are under lock so there are no races.
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
*/
selwakeuppri(&kring->si, PI_NET);
selwakeuppri(tx == NR_TX ? &na->tx_si : &na->rx_si, PI_NET);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return kring->ring->slot;
}
/*
* Default functions to handle rx/tx interrupts
* we have 4 cases:
* 1 ring, single lock:
* lock(core); wake(i=0); unlock(core)
* N rings, single lock:
* lock(core); wake(i); wake(N+1) unlock(core)
* 1 ring, separate locks: (i=0)
* lock(i); wake(i); unlock(i)
* N rings, separate locks:
* lock(i); wake(i); unlock(i); lock(core) wake(N+1) unlock(core)
* work_done is non-null on the RX path.
*
* The 'q' argument also includes flag to tell whether the queue is
* already locked on enter, and whether it should remain locked on exit.
* This helps adapting to different defaults in drivers and OSes.
*/
int
netmap_rx_irq(struct ifnet *ifp, int q, int *work_done)
{
struct netmap_adapter *na;
struct netmap_kring *r;
NM_SELINFO_T *main_wq;
int locktype, unlocktype, lock;
if (!(ifp->if_capenable & IFCAP_NETMAP))
return 0;
lock = q & (NETMAP_LOCKED_ENTER | NETMAP_LOCKED_EXIT);
q = q & NETMAP_RING_MASK;
ND(5, "received %s queue %d", work_done ? "RX" : "TX" , q);
na = NA(ifp);
if (na->na_flags & NAF_SKIP_INTR) {
ND("use regular interrupt");
return 0;
}
if (work_done) { /* RX path */
if (q >= na->num_rx_rings)
return 0; // not a physical queue
r = na->rx_rings + q;
r->nr_kflags |= NKR_PENDINTR;
main_wq = (na->num_rx_rings > 1) ? &na->rx_si : NULL;
locktype = NETMAP_RX_LOCK;
unlocktype = NETMAP_RX_UNLOCK;
} else { /* TX path */
if (q >= na->num_tx_rings)
return 0; // not a physical queue
r = na->tx_rings + q;
main_wq = (na->num_tx_rings > 1) ? &na->tx_si : NULL;
work_done = &q; /* dummy */
locktype = NETMAP_TX_LOCK;
unlocktype = NETMAP_TX_UNLOCK;
}
if (na->separate_locks) {
if (!(lock & NETMAP_LOCKED_ENTER))
na->nm_lock(ifp, locktype, q);
selwakeuppri(&r->si, PI_NET);
na->nm_lock(ifp, unlocktype, q);
if (main_wq) {
na->nm_lock(ifp, NETMAP_CORE_LOCK, 0);
selwakeuppri(main_wq, PI_NET);
na->nm_lock(ifp, NETMAP_CORE_UNLOCK, 0);
}
/* lock the queue again if requested */
if (lock & NETMAP_LOCKED_EXIT)
na->nm_lock(ifp, locktype, q);
} else {
if (!(lock & NETMAP_LOCKED_ENTER))
na->nm_lock(ifp, NETMAP_CORE_LOCK, 0);
selwakeuppri(&r->si, PI_NET);
if (main_wq)
selwakeuppri(main_wq, PI_NET);
if (!(lock & NETMAP_LOCKED_EXIT))
na->nm_lock(ifp, NETMAP_CORE_UNLOCK, 0);
}
*work_done = 1; /* do not fire napi again */
return 1;
}
#ifdef linux /* linux-specific routines */
/*
* Remap linux arguments into the FreeBSD call.
* - pwait is the poll table, passed as 'dev';
* If pwait == NULL someone else already woke up before. We can report
* events but they are filtered upstream.
* If pwait != NULL, then pwait->key contains the list of events.
* - events is computed from pwait as above.
* - file is passed as 'td';
*/
static u_int
linux_netmap_poll(struct file * file, struct poll_table_struct *pwait)
{
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
int events = POLLIN | POLLOUT; /* XXX maybe... */
#elif LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0)
int events = pwait ? pwait->key : POLLIN | POLLOUT;
#else /* in 3.4.0 field 'key' was renamed to '_key' */
int events = pwait ? pwait->_key : POLLIN | POLLOUT;
#endif
return netmap_poll((void *)pwait, events, (void *)file);
}
static int
linux_netmap_mmap(struct file *f, struct vm_area_struct *vma)
{
int lut_skip, i, j;
int user_skip = 0;
struct lut_entry *l_entry;
int error = 0;
unsigned long off, tomap;
/*
* vma->vm_start: start of mapping user address space
* vma->vm_end: end of the mapping user address space
* vma->vm_pfoff: offset of first page in the device
*/
// XXX security checks
error = netmap_get_memory(f->private_data);
ND("get_memory returned %d", error);
if (error)
return -error;
off = vma->vm_pgoff << PAGE_SHIFT; /* offset in bytes */
tomap = vma->vm_end - vma->vm_start;
for (i = 0; i < NETMAP_POOLS_NR; i++) { /* loop through obj_pools */
const struct netmap_obj_pool *p = &nm_mem.pools[i];
/*
* In each pool memory is allocated in clusters
* of size _clustsize, each containing clustentries
* entries. For each object k we already store the
* vtophys mapping in lut[k] so we use that, scanning
* the lut[] array in steps of clustentries,
* and we map each cluster (not individual pages,
* it would be overkill -- XXX slow ? 20130415).
*/
/*
* We interpret vm_pgoff as an offset into the whole
* netmap memory, as if all clusters where contiguous.
*/
for (lut_skip = 0, j = 0; j < p->_numclusters; j++, lut_skip += p->clustentries) {
unsigned long paddr, mapsize;
if (p->_clustsize <= off) {
off -= p->_clustsize;
continue;
}
l_entry = &p->lut[lut_skip]; /* first obj in the cluster */
paddr = l_entry->paddr + off;
mapsize = p->_clustsize - off;
off = 0;
if (mapsize > tomap)
mapsize = tomap;
ND("remap_pfn_range(%lx, %lx, %lx)",
vma->vm_start + user_skip,
paddr >> PAGE_SHIFT, mapsize);
if (remap_pfn_range(vma, vma->vm_start + user_skip,
paddr >> PAGE_SHIFT, mapsize,
vma->vm_page_prot))
return -EAGAIN; // XXX check return value
user_skip += mapsize;
tomap -= mapsize;
if (tomap == 0)
goto done;
}
}
done:
return 0;
}
static netdev_tx_t
linux_netmap_start(struct sk_buff *skb, struct net_device *dev)
{
netmap_start(dev, skb);
return (NETDEV_TX_OK);
}
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) // XXX was 38
#define LIN_IOCTL_NAME .ioctl
int
linux_netmap_ioctl(struct inode *inode, struct file *file, u_int cmd, u_long data /* arg */)
#else
#define LIN_IOCTL_NAME .unlocked_ioctl
long
linux_netmap_ioctl(struct file *file, u_int cmd, u_long data /* arg */)
#endif
{
int ret;
struct nmreq nmr;
bzero(&nmr, sizeof(nmr));
if (data && copy_from_user(&nmr, (void *)data, sizeof(nmr) ) != 0)
return -EFAULT;
ret = netmap_ioctl(NULL, cmd, (caddr_t)&nmr, 0, (void *)file);
if (data && copy_to_user((void*)data, &nmr, sizeof(nmr) ) != 0)
return -EFAULT;
return -ret;
}
static int
netmap_release(struct inode *inode, struct file *file)
{
(void)inode; /* UNUSED */
if (file->private_data)
netmap_dtor(file->private_data);
return (0);
}
static int
linux_netmap_open(struct inode *inode, struct file *file)
{
struct netmap_priv_d *priv;
(void)inode; /* UNUSED */
priv = malloc(sizeof(struct netmap_priv_d), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (priv == NULL)
return -ENOMEM;
file->private_data = priv;
return (0);
}
static struct file_operations netmap_fops = {
.open = linux_netmap_open,
.mmap = linux_netmap_mmap,
LIN_IOCTL_NAME = linux_netmap_ioctl,
.poll = linux_netmap_poll,
.release = netmap_release,
};
static struct miscdevice netmap_cdevsw = { /* same name as FreeBSD */
MISC_DYNAMIC_MINOR,
"netmap",
&netmap_fops,
};
static int netmap_init(void);
static void netmap_fini(void);
/* Errors have negative values on linux */
static int linux_netmap_init(void)
{
return -netmap_init();
}
module_init(linux_netmap_init);
module_exit(netmap_fini);
/* export certain symbols to other modules */
EXPORT_SYMBOL(netmap_attach); // driver attach routines
EXPORT_SYMBOL(netmap_detach); // driver detach routines
EXPORT_SYMBOL(netmap_ring_reinit); // ring init on error
EXPORT_SYMBOL(netmap_buffer_lut);
EXPORT_SYMBOL(netmap_total_buffers); // index check
EXPORT_SYMBOL(netmap_buffer_base);
EXPORT_SYMBOL(netmap_reset); // ring init routines
EXPORT_SYMBOL(netmap_buf_size);
EXPORT_SYMBOL(netmap_rx_irq); // default irq handler
EXPORT_SYMBOL(netmap_no_pendintr); // XXX mitigation - should go away
MODULE_AUTHOR("http://info.iet.unipi.it/~luigi/netmap/");
MODULE_DESCRIPTION("The netmap packet I/O framework");
MODULE_LICENSE("Dual BSD/GPL"); /* the code here is all BSD. */
#else /* __FreeBSD__ */
static struct cdevsw netmap_cdevsw = {
.d_version = D_VERSION,
.d_name = "netmap",
.d_open = netmap_open,
.d_mmap = netmap_mmap,
.d_mmap_single = netmap_mmap_single,
.d_ioctl = netmap_ioctl,
.d_poll = netmap_poll,
.d_close = netmap_close,
};
#endif /* __FreeBSD__ */
#ifdef NM_BRIDGE
/*
*---- support for virtual bridge -----
*/
/* ----- FreeBSD if_bridge hash function ------- */
/*
* The following hash function is adapted from "Hash Functions" by Bob Jenkins
* ("Algorithm Alley", Dr. Dobbs Journal, September 1997).
*
* http://www.burtleburtle.net/bob/hash/spooky.html
*/
#define mix(a, b, c) \
do { \
a -= b; a -= c; a ^= (c >> 13); \
b -= c; b -= a; b ^= (a << 8); \
c -= a; c -= b; c ^= (b >> 13); \
a -= b; a -= c; a ^= (c >> 12); \
b -= c; b -= a; b ^= (a << 16); \
c -= a; c -= b; c ^= (b >> 5); \
a -= b; a -= c; a ^= (c >> 3); \
b -= c; b -= a; b ^= (a << 10); \
c -= a; c -= b; c ^= (b >> 15); \
} while (/*CONSTCOND*/0)
static __inline uint32_t
nm_bridge_rthash(const uint8_t *addr)
{
uint32_t a = 0x9e3779b9, b = 0x9e3779b9, c = 0; // hask key
b += addr[5] << 8;
b += addr[4];
a += addr[3] << 24;
a += addr[2] << 16;
a += addr[1] << 8;
a += addr[0];
mix(a, b, c);
#define BRIDGE_RTHASH_MASK (NM_BDG_HASH-1)
return (c & BRIDGE_RTHASH_MASK);
}
#undef mix
static int
bdg_netmap_reg(struct ifnet *ifp, int onoff)
{
int i, err = 0;
struct nm_bridge *b = ifp->if_bridge;
BDG_LOCK(b);
if (onoff) {
/* the interface must be already in the list.
* only need to mark the port as active
*/
ND("should attach %s to the bridge", ifp->if_xname);
for (i=0; i < NM_BDG_MAXPORTS; i++)
if (b->bdg_ports[i] == ifp)
break;
if (i == NM_BDG_MAXPORTS) {
D("no more ports available");
err = EINVAL;
goto done;
}
ND("setting %s in netmap mode", ifp->if_xname);
ifp->if_capenable |= IFCAP_NETMAP;
NA(ifp)->bdg_port = i;
b->act_ports |= (1<<i);
b->bdg_ports[i] = ifp;
} else {
/* should be in the list, too -- remove from the mask */
ND("removing %s from netmap mode", ifp->if_xname);
ifp->if_capenable &= ~IFCAP_NETMAP;
i = NA(ifp)->bdg_port;
b->act_ports &= ~(1<<i);
}
done:
BDG_UNLOCK(b);
return err;
}
static int
nm_bdg_flush(struct nm_bdg_fwd *ft, int n, struct ifnet *ifp)
{
int i, ifn;
uint64_t all_dst, dst;
uint32_t sh, dh;
uint64_t mysrc = 1 << NA(ifp)->bdg_port;
uint64_t smac, dmac;
struct netmap_slot *slot;
struct nm_bridge *b = ifp->if_bridge;
ND("prepare to send %d packets, act_ports 0x%x", n, b->act_ports);
/* only consider valid destinations */
all_dst = (b->act_ports & ~mysrc);
/* first pass: hash and find destinations */
for (i = 0; likely(i < n); i++) {
uint8_t *buf = ft[i].buf;
dmac = le64toh(*(uint64_t *)(buf)) & 0xffffffffffff;
smac = le64toh(*(uint64_t *)(buf + 4));
smac >>= 16;
if (unlikely(netmap_verbose)) {
uint8_t *s = buf+6, *d = buf;
D("%d len %4d %02x:%02x:%02x:%02x:%02x:%02x -> %02x:%02x:%02x:%02x:%02x:%02x",
i,
ft[i].len,
s[0], s[1], s[2], s[3], s[4], s[5],
d[0], d[1], d[2], d[3], d[4], d[5]);
}
/*
* The hash is somewhat expensive, there might be some
* worthwhile optimizations here.
*/
if ((buf[6] & 1) == 0) { /* valid src */
uint8_t *s = buf+6;
sh = nm_bridge_rthash(buf+6); // XXX hash of source
/* update source port forwarding entry */
b->ht[sh].mac = smac; /* XXX expire ? */
b->ht[sh].ports = mysrc;
if (netmap_verbose)
D("src %02x:%02x:%02x:%02x:%02x:%02x on port %d",
s[0], s[1], s[2], s[3], s[4], s[5], NA(ifp)->bdg_port);
}
dst = 0;
if ( (buf[0] & 1) == 0) { /* unicast */
uint8_t *d = buf;
dh = nm_bridge_rthash(buf); // XXX hash of dst
if (b->ht[dh].mac == dmac) { /* found dst */
dst = b->ht[dh].ports;
if (netmap_verbose)
D("dst %02x:%02x:%02x:%02x:%02x:%02x to port %x",
d[0], d[1], d[2], d[3], d[4], d[5], (uint32_t)(dst >> 16));
}
}
if (dst == 0)
dst = all_dst;
dst &= all_dst; /* only consider valid ports */
if (unlikely(netmap_verbose))
D("pkt goes to ports 0x%x", (uint32_t)dst);
ft[i].dst = dst;
}
/* second pass, scan interfaces and forward */
all_dst = (b->act_ports & ~mysrc);
for (ifn = 0; all_dst; ifn++) {
struct ifnet *dst_ifp = b->bdg_ports[ifn];
struct netmap_adapter *na;
struct netmap_kring *kring;
struct netmap_ring *ring;
int j, lim, sent, locked;
if (!dst_ifp)
continue;
ND("scan port %d %s", ifn, dst_ifp->if_xname);
dst = 1 << ifn;
if ((dst & all_dst) == 0) /* skip if not set */
continue;
all_dst &= ~dst; /* clear current node */
na = NA(dst_ifp);
ring = NULL;
kring = NULL;
lim = sent = locked = 0;
/* inside, scan slots */
for (i = 0; likely(i < n); i++) {
if ((ft[i].dst & dst) == 0)
continue; /* not here */
if (!locked) {
kring = &na->rx_rings[0];
ring = kring->ring;
lim = kring->nkr_num_slots - 1;
na->nm_lock(dst_ifp, NETMAP_RX_LOCK, 0);
locked = 1;
}
if (unlikely(kring->nr_hwavail >= lim)) {
if (netmap_verbose)
D("rx ring full on %s", ifp->if_xname);
break;
}
j = kring->nr_hwcur + kring->nr_hwavail;
if (j > lim)
j -= kring->nkr_num_slots;
slot = &ring->slot[j];
ND("send %d %d bytes at %s:%d", i, ft[i].len, dst_ifp->if_xname, j);
pkt_copy(ft[i].buf, NMB(slot), ft[i].len);
slot->len = ft[i].len;
kring->nr_hwavail++;
sent++;
}
if (locked) {
ND("sent %d on %s", sent, dst_ifp->if_xname);
if (sent)
selwakeuppri(&kring->si, PI_NET);
na->nm_lock(dst_ifp, NETMAP_RX_UNLOCK, 0);
}
}
return 0;
}
/*
* main dispatch routine
*/
static int
bdg_netmap_txsync(struct ifnet *ifp, u_int ring_nr, int do_lock)
{
struct netmap_adapter *na = NA(ifp);
struct netmap_kring *kring = &na->tx_rings[ring_nr];
struct netmap_ring *ring = kring->ring;
int i, j, k, lim = kring->nkr_num_slots - 1;
struct nm_bdg_fwd *ft = (struct nm_bdg_fwd *)(ifp + 1);
int ft_i; /* position in the forwarding table */
k = ring->cur;
if (k > lim)
return netmap_ring_reinit(kring);
if (do_lock)
na->nm_lock(ifp, NETMAP_TX_LOCK, ring_nr);
if (netmap_bridge <= 0) { /* testing only */
j = k; // used all
goto done;
}
if (netmap_bridge > NM_BDG_BATCH)
netmap_bridge = NM_BDG_BATCH;
ft_i = 0; /* start from 0 */
for (j = kring->nr_hwcur; likely(j != k); j = unlikely(j == lim) ? 0 : j+1) {
struct netmap_slot *slot = &ring->slot[j];
int len = ft[ft_i].len = slot->len;
char *buf = ft[ft_i].buf = NMB(slot);
prefetch(buf);
if (unlikely(len < 14))
continue;
if (unlikely(++ft_i == netmap_bridge))
ft_i = nm_bdg_flush(ft, ft_i, ifp);
}
if (ft_i)
ft_i = nm_bdg_flush(ft, ft_i, ifp);
/* count how many packets we sent */
i = k - j;
if (i < 0)
i += kring->nkr_num_slots;
kring->nr_hwavail = kring->nkr_num_slots - 1 - i;
if (j != k)
D("early break at %d/ %d, avail %d", j, k, kring->nr_hwavail);
done:
kring->nr_hwcur = j;
ring->avail = kring->nr_hwavail;
if (do_lock)
na->nm_lock(ifp, NETMAP_TX_UNLOCK, ring_nr);
if (netmap_verbose)
D("%s ring %d lock %d", ifp->if_xname, ring_nr, do_lock);
return 0;
}
static int
bdg_netmap_rxsync(struct ifnet *ifp, u_int ring_nr, int do_lock)
{
struct netmap_adapter *na = NA(ifp);
struct netmap_kring *kring = &na->rx_rings[ring_nr];
struct netmap_ring *ring = kring->ring;
u_int j, n, lim = kring->nkr_num_slots - 1;
u_int k = ring->cur, resvd = ring->reserved;
ND("%s ring %d lock %d avail %d",
ifp->if_xname, ring_nr, do_lock, kring->nr_hwavail);
if (k > lim)
return netmap_ring_reinit(kring);
if (do_lock)
na->nm_lock(ifp, NETMAP_RX_LOCK, ring_nr);
/* skip past packets that userspace has released */
j = kring->nr_hwcur; /* netmap ring index */
if (resvd > 0) {
if (resvd + ring->avail >= lim + 1) {
D("XXX invalid reserve/avail %d %d", resvd, ring->avail);
ring->reserved = resvd = 0; // XXX panic...
}
k = (k >= resvd) ? k - resvd : k + lim + 1 - resvd;
}
if (j != k) { /* userspace has released some packets. */
n = k - j;
if (n < 0)
n += kring->nkr_num_slots;
ND("userspace releases %d packets", n);
for (n = 0; likely(j != k); n++) {
struct netmap_slot *slot = &ring->slot[j];
void *addr = NMB(slot);
if (addr == netmap_buffer_base) { /* bad buf */
if (do_lock)
na->nm_lock(ifp, NETMAP_RX_UNLOCK, ring_nr);
return netmap_ring_reinit(kring);
}
/* decrease refcount for buffer */
slot->flags &= ~NS_BUF_CHANGED;
j = unlikely(j == lim) ? 0 : j + 1;
}
kring->nr_hwavail -= n;
kring->nr_hwcur = k;
}
/* tell userspace that there are new packets */
ring->avail = kring->nr_hwavail - resvd;
if (do_lock)
na->nm_lock(ifp, NETMAP_RX_UNLOCK, ring_nr);
return 0;
}
static void
bdg_netmap_attach(struct ifnet *ifp)
{
struct netmap_adapter na;
ND("attaching virtual bridge");
bzero(&na, sizeof(na));
na.ifp = ifp;
na.separate_locks = 1;
na.num_tx_desc = NM_BRIDGE_RINGSIZE;
na.num_rx_desc = NM_BRIDGE_RINGSIZE;
na.nm_txsync = bdg_netmap_txsync;
na.nm_rxsync = bdg_netmap_rxsync;
na.nm_register = bdg_netmap_reg;
netmap_attach(&na, 1);
}
#endif /* NM_BRIDGE */
static struct cdev *netmap_dev; /* /dev/netmap character device. */
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Module loader.
*
* Create the /dev/netmap device and initialize all global
* variables.
*
* Return 0 on success, errno on failure.
*/
static int
netmap_init(void)
{
int error;
error = netmap_memory_init();
if (error != 0) {
printf("netmap: unable to initialize the memory allocator.\n");
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
return (error);
}
printf("netmap: loaded module\n");
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
netmap_dev = make_dev(&netmap_cdevsw, 0, UID_ROOT, GID_WHEEL, 0660,
"netmap");
#ifdef NM_BRIDGE
{
int i;
for (i = 0; i < NM_BRIDGES; i++)
mtx_init(&nm_bridges[i].bdg_lock, "bdg lock", "bdg_lock", MTX_DEF);
}
#endif
return (error);
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
}
/*
* Module unloader.
*
* Free all the memory, and destroy the ``/dev/netmap`` device.
*/
static void
netmap_fini(void)
{
destroy_dev(netmap_dev);
netmap_memory_fini();
printf("netmap: unloaded module.\n");
}
#ifdef __FreeBSD__
Bring in support for netmap, a framework for very efficient packet I/O from userspace, capable of line rate at 10G, see http://info.iet.unipi.it/~luigi/netmap/ At this time I am bringing in only the generic code (sys/dev/netmap/ plus two headers under sys/net/), and some sample applications in tools/tools/netmap. There is also a manpage in share/man/man4 [1] In order to make use of the framework you need to build a kernel with "device netmap", and patch individual drivers with the code that you can find in sys/dev/netmap/head.diff The file will go away as the relevant pieces are committed to the various device drivers, which should happen in a few days after talking to the driver maintainers. Netmap support is available at the moment for Intel 10G and 1G cards (ixgbe, em/lem/igb), and for the Realtek 1G card ("re"). I have partial patches for "bge" and am starting to work on "cxgbe". Hopefully changes are trivial enough so interested third parties can submit their patches. Interested people can contact me for advice on how to add netmap support to specific devices. CREDITS: Netmap has been developed by Luigi Rizzo and other collaborators at the Universita` di Pisa, and supported by EU project CHANGE (http://www.change-project.eu/) The code is distributed under a BSD Copyright. [1] In my opinion is a bad idea to have all manpage in one directory. We should place kernel documentation in the same dir that contains the code, which would make it much simpler to keep doc and code in sync, reduce the clutter in share/man/ and incidentally is the policy used for all of userspace code. Makefiles and doc tools can be trivially adjusted to find the manpages in the relevant subdirs.
2011-11-17 12:17:39 +00:00
/*
* Kernel entry point.
*
* Initialize/finalize the module and return.
*
* Return 0 on success, errno on failure.
*/
static int
netmap_loader(__unused struct module *module, int event, __unused void *arg)
{
int error = 0;
switch (event) {
case MOD_LOAD:
error = netmap_init();
break;
case MOD_UNLOAD:
netmap_fini();
break;
default:
error = EOPNOTSUPP;
break;
}
return (error);
}
DEV_MODULE(netmap, netmap_loader, NULL);
#endif /* __FreeBSD__ */