freebsd-nq/sys/pci/smc83c170.h

333 lines
11 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1997 Semen Ustimenko
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* stable-166
*
*/
/*
* smc83c170.h
*/
/*
* Configuration
*/
#define EPIC_MAX_DEVICES 4
#define RX_TO_MBUF 1 /* Eliminates need of copy received */
/* packet to new allocated mbuf, */
/* receive directly to mbuf */
/*#define TX_FRAG_LIST 1 Eliminites need of copy xmiting */
/* packet to static buffer, xmit from */
/* mbuf directly */
/*#define EPIC_DEBUG 1*/
#define TX_RING_SIZE 16
#define RX_RING_SIZE 16
#define EPIC_FULL_DUPLEX 1
#define EPIC_HALF_DUPLEX 0
#define ETHER_MAX_FRAME_LEN (ETHER_MAX_LEN + ETHER_CRC_LEN)
/* Shall be moved to ../net/if_mib.h */
#define dot3VendorSMC 8
#define dot3ChipSetSMC83c170 1
/* PCI identification */
#define SMC_VENDORID 0x10B8
#define CHIPID_83C170 0x0005
#define PCI_VENDORID(x) ((x) & 0xFFFF)
#define PCI_CHIPID(x) (((x) >> 16) & 0xFFFF)
/* PCI configuration */
#define PCI_CFID 0x00 /* Configuration ID */
#define PCI_CFCS 0x04 /* Configurtion Command/Status */
#define PCI_CFRV 0x08 /* Configuration Revision */
#define PCI_CFLT 0x0c /* Configuration Latency Timer */
#define PCI_CBIO 0x10 /* Configuration Base IO Address */
#define PCI_CBMA 0x14 /* Configuration Base Memory Address */
#define PCI_CFIT 0x3c /* Configuration Interrupt */
#define PCI_CFDA 0x40 /* Configuration Driver Area */
#define PCI_CONF_WRITE(r, v) pci_conf_write(config_id, (r), (v))
#define PCI_CONF_READ(r) pci_conf_read(config_id, (r))
/* EPIC's registers */
#define COMMAND 0x0000
#define INTSTAT 0x0004 /* Interrupt status. See below */
#define INTMASK 0x0008 /* Interrupt mask. See below */
#define GENCTL 0x000C
#define NVCTL 0x0010
#define EECTL 0x0014 /* EEPROM control **/
#define TEST1 0x001C /* XXXXX */
#define CRCCNT 0x0020 /* CRC error counter */
#define ALICNT 0x0024 /* FrameTooLang error counter */
#define MPCNT 0x0028 /* MissedFrames error counters */
#define MIICTL 0x0030
#define MIIDATA 0x0034
#define MIICFG 0x0038
#define IPG 0x003C
#define LAN0 0x0040 /* MAC address */
#define LAN1 0x0044 /* MAC address */
#define LAN2 0x0048 /* MAC address */
#define ID_CHK 0x004C
#define MC0 0x0050 /* Multicast filter table */
#define MC1 0x0054 /* Multicast filter table */
#define MC2 0x0058 /* Multicast filter table */
#define MC3 0x005C /* Multicast filter table */
#define RXCON 0x0060 /* Rx control register */
#define TXCON 0x0070 /* Tx control register */
#define TXSTAT 0x0074
#define PRCDAR 0x0084 /* RxRing bus address */
#define PRSTAT 0x00A4
#define PRCPTHR 0x00B0
#define PTCDAR 0x00C4 /* TxRing bus address */
#define ETXTHR 0x00DC
#define COMMAND_STOP_RX 0x01
#define COMMAND_START_RX 0x02
#define COMMAND_TXQUEUED 0x04
#define COMMAND_RXQUEUED 0x08
#define COMMAND_NEXTFRAME 0x10
#define COMMAND_STOP_TDMA 0x20
#define COMMAND_STOP_RDMA 0x40
#define COMMAND_TXUGO 0x80
/* Tx threshold */
#define TX_FIFO_THRESH 0x80 /* 0x40 or 0x10 */
/* Interrupt register bits */
#define INTSTAT_RCC 0x00000001
#define INTSTAT_HCC 0x00000002
#define INTSTAT_RQE 0x00000004
#define INTSTAT_OVW 0x00000008
#define INTSTAT_RXE 0x00000010
#define INTSTAT_TXC 0x00000020
#define INTSTAT_TCC 0x00000040
#define INTSTAT_TQE 0x00000080
#define INTSTAT_TXU 0x00000100
#define INTSTAT_CNT 0x00000200
#define INTSTAT_PREI 0x00000400
#define INTSTAT_RCT 0x00000800
#define INTSTAT_FATAL 0x00001000 /* One of DPE,APE,PMA,PTA happend */
#define INTSTAT_UNUSED1 0x00002000
#define INTSTAT_UNUSED2 0x00004000
#define INTSTAT_GP2 0x00008000 /* PHY Event */
#define INTSTAT_INT_ACTV 0x00010000
#define INTSTAT_RXIDLE 0x00020000
#define INTSTAT_TXIDLE 0x00040000
#define INTSTAT_RCIP 0x00080000
#define INTSTAT_TCIP 0x00100000
#define INTSTAT_RBE 0x00200000
#define INTSTAT_RCTS 0x00400000
#define INTSTAT_RSV 0x00800000
#define INTSTAT_DPE 0x01000000 /* PCI Fatal error */
#define INTSTAT_APE 0x02000000 /* PCI Fatal error */
#define INTSTAT_PMA 0x04000000 /* PCI Fatal error */
#define INTSTAT_PTA 0x08000000 /* PCI Fatal error */
#define GENCTL_SOFT_RESET 0x00000001
#define GENCTL_ENABLE_INTERRUPT 0x00000002
#define GENCTL_SOFTWARE_INTERRUPT 0x00000004
#define GENCTL_POWER_DOWN 0x00000008
#define GENCTL_ONECOPY 0x00000010
#define GENCTL_BIG_ENDIAN 0x00000020
#define GENCTL_RECEIVE_DMA_PRIORITY 0x00000040
#define GENCTL_TRANSMIT_DMA_PRIORITY 0x00000080
#define GENCTL_RECEIVE_FIFO_THRESHOLD128 0x00000300
#define GENCTL_RECEIVE_FIFO_THRESHOLD96 0x00000200
#define GENCTL_RECEIVE_FIFO_THRESHOLD64 0x00000100
#define GENCTL_RECEIVE_FIFO_THRESHOLD32 0x00000000
#define GENCTL_MEMORY_READ_LINE 0x00000400
#define GENCTL_MEMORY_READ_MULTIPLE 0x00000800
#define GENCTL_SOFTWARE1 0x00001000
#define GENCTL_SOFTWARE2 0x00002000
#define GENCTL_RESET_PHY 0x00004000
#define RXCON_SAVE_ERRORED_PACKETS 0x00000001
#define RXCON_RECEIVE_RUNT_FRAMES 0x00000002
#define RXCON_RECEIVE_BROADCAST_FRAMES 0x00000004
#define RXCON_RECEIVE_MULTICAST_FRAMES 0x00000008
#define RXCON_RECEIVE_INVERSE_INDIVIDUAL_ADDRESS_FRAMES 0x00000010
#define RXCON_PROMISCUOUS_MODE 0x00000020
#define RXCON_MONITOR_MODE 0x00000040
#define RXCON_EARLY_RECEIVE_ENABLE 0x00000080
#define RXCON_EXTERNAL_BUFFER_DISABLE 0x00000000
#define RXCON_EXTERNAL_BUFFER_16K 0x00000100
#define RXCON_EXTERNAL_BUFFER_32K 0x00000200
#define RXCON_EXTERNAL_BUFFER_128K 0x00000300
#define TXCON_EARLY_TRANSMIT_ENABLE 0x00000001
#define TXCON_LOOPBACK_DISABLE 0x00000000
#define TXCON_LOOPBACK_MODE_INT 0x00000002
#define TXCON_LOOPBACK_MODE_PHY 0x00000004
#define TXCON_LOOPBACK_MODE_FULL_DUPLEX 0x00000006
#define TXCON_SLOT_TIME 0x00000078
#define TXCON_DEFAULT (TXCON_SLOT_TIME|TXCON_EARLY_TRANSMIT_ENABLE)
/*
* National Semiconductor's DP83840A Registers and bits
*/
#define DP83840_BMCR 0x00 /* Control register */
#define DP83840_BMSR 0x01 /* Status rgister */
#define DP83840_ANAR 0x04 /* Autonegotiation advertising register */
#define DP83840_ANER 0x06 /* Auto-Negotiation Expansion Register */
#define DP83840_PAR 0x19 /* PHY Address Register */
#define DP83840_PHYIDR1 0x02
#define DP83840_PHYIDR2 0x03
#define BMCR_RESET 0x8000
#define BMCR_100MBPS 0x2000 /* 10/100 Mbps */
#define BMCR_AUTONEGOTIATION 0x1000 /* ON/OFF */
#define BMCR_RESTART_AUTONEG 0x0200
#define BMCR_FULL_DUPLEX 0x0100
#define BMSR_100BASE_T4 0x8000
#define BMSR_100BASE_TX_FD 0x4000
#define BMSR_100BASE_TX 0x2000
#define BMSR_10BASE_T_FD 0x1000
#define BMSR_10BASE_T 0x0800
#define BMSR_AUTONEG_COMPLETE 0x0020
#define BMSR_AUTONEG_ABLE 0x0008
#define BMSR_LINK_STATUS 0x0004
#define PAR_FULL_DUPLEX 0x0400
#define ANER_MULTIPLE_LINK_FAULT 0x10
#define ANAR_10 0x0020
#define ANAR_10_FD 0x0040
#define ANAR_100 0x0080
#define ANAR_100_FD 0x0100
/*
* Structures definition and Functions prototypes
*/
/* EPIC's hardware descriptors, must be aligned on dword in memory */
struct epic_tx_desc {
u_int16_t status;
u_int16_t txlength;
u_int32_t bufaddr;
u_int16_t buflength;
u_int16_t control;
u_int32_t next;
};
struct epic_rx_desc {
u_int16_t status;
u_int16_t rxlength;
u_int32_t bufaddr;
u_int32_t buflength;
u_int32_t next;
};
struct epic_frag_elem { /* frag elem structure for LFFORM=0 */
u_int32_t fragaddr;
u_int32_t fraglen;
};
struct epic_frag_list {
u_int32_t numfrags;
struct epic_frag_elem frag[63];
};
/* This is driver's structure to define EPIC descriptors */
struct epic_rx_buffer {
struct epic_rx_desc desc; /* EPIC's descriptor */
caddr_t data; /* Rx buffer address */
#if defined(RX_TO_MBUF)
struct mbuf * mbuf; /* Or mbuf */
#endif
};
struct epic_tx_buffer {
struct epic_tx_desc desc; /* EPIC's descriptor */
#if defined(TX_FRAG_LIST)
struct mbuf * mbuf; /* mbuf contained packet */
struct epic_frag_list flist; /* static frag list */
#else
caddr_t data; /* Tx buffer address */
#endif
};
/*
* NB: ALIGN OF ABOVE STRUCTURES
* epic_rx_desc, epic_tx_desc, epic_frag_list - must be aligned on dword
*/
/* Driver status structure */
typedef struct {
u_int32_t unit;
struct epic_rx_buffer rx_buffer[RX_RING_SIZE];
struct epic_tx_buffer tx_buffer[TX_RING_SIZE];
struct arpcom epic_ac;
u_int32_t cur_tx;
u_int32_t cur_rx;
u_int32_t dirty_tx;
u_int32_t pending_txs;
u_int32_t iobase;
u_int32_t irq;
struct ifmib_iso_8802_3 dot3stats;
} epic_softc_t;
#define epic_if epic_ac.ac_if
#define epic_macaddr epic_ac.ac_enaddr
//extern epic_softc_t *epics[];
//extern u_long epic_pci_count;
static char* epic_pci_probe(pcici_t, pcidi_t);
/* Folowing functions calls splimp() */
static int epic_ifioctl(register struct ifnet *, int, caddr_t);
static void epic_ifstart(struct ifnet *);
static void epic_ifwatchdog(struct ifnet *);
static void epic_pci_attach(pcici_t, int);
static int epic_init(epic_softc_t *);
static void epic_stop(epic_softc_t *);
/* Following functions doesn't call splimp() */
static void epic_intr_normal(void *);
static void epic_rx_done(epic_softc_t *);
static void epic_tx_done(epic_softc_t *);
static void epic_update_if_media_flags(epic_softc_t *);
static int epic_init_rings(epic_softc_t *);
static void epic_free_rings(epic_softc_t *);
static void epic_set_rx_mode(epic_softc_t *);
static void epic_set_mc_table(epic_softc_t *);
static void epic_set_media_speed(epic_softc_t *);
static int epic_autoneg(epic_softc_t *);
static int epic_read_eeprom(u_int16_t,u_int16_t);
static void epic_output_eepromw(u_int16_t, u_int16_t);
static u_int16_t epic_input_eepromw(u_int16_t);
static u_int8_t epic_eeprom_clock(u_int16_t,u_int8_t);
static void epic_write_eepromreg(u_int16_t,u_int8_t);
static u_int8_t epic_read_eepromreg(u_int16_t);
static int epic_read_phy_register(u_int16_t, u_int16_t);
static void epic_write_phy_register(u_int16_t, u_int16_t,u_int16_t);