freebsd-nq/etc/rc.d/ntpd

#!/bin/sh
#
# $NetBSD: ntpd,v 1.6 2002/03/22 04:33:59 thorpej Exp $
# $FreeBSD$
#

# PROVIDE: ntpd
# REQUIRE: DAEMON cleanvar
# BEFORE:  LOGIN
# KEYWORD: nojail

. /etc/rc.subr

name=ntpd
rcvar=`set_rcvar`
command="/usr/sbin/${name}"
pidfile="/var/run/${name}.pid"
start_precmd="ntpd_precmd"
required_files="/etc/ntp.conf"

ntpd_precmd()
{
	if checkyesno ntpd_sync_on_start; then
		rc_flags="-g ${ntpd_flags}"
	fi

	if [ -z "$ntpd_chrootdir" ]; then
		return 0;
	fi

	# If running in a chroot cage, ensure that the appropriate files
	# exist inside the cage, as well as helper symlinks into the cage
	# from outside.
	#
	# As this is called after the is_running and required_dir checks
	# are made in run_rc_command(), we can safely assume ${ntpd_chrootdir}
	# exists and ntpd isn't running at this point (unless forcestart
	# is used).
	#
	if [ ! -c "${ntpd_chrootdir}/dev/clockctl" ]; then
		rm -f "${ntpd_chrootdir}/dev/clockctl"
		( cd /dev ; /bin/pax -rw -pe clockctl "${ntpd_chrootdir}/dev" )
	fi
	ln -fs "${ntpd_chrootdir}/var/db/ntp.drift" /var/db/ntp.drift

	#	Change run_rc_commands()'s internal copy of $ntpd_flags
	#
	rc_flags="-u ntpd:ntpd -i ${ntpd_chrootdir} $rc_flags"
}

load_rc_config $name
run_rc_command "$1"
Import the NetBSD 1.5 RC system. Note that `rc' and `rc.shutdown' could not be imported because we already have files with those names. 2001-06-16 07:16:14 +00:00			`#!/bin/sh`
			`#`
Merge in all the changes that Mike Makonnen has been maintaining for a while. This is only the script pieces, the glue for the build comes next. Submitted by: Mike Makonnen <makonnen@pacbell.net> Reviewed by: silence on -current and -hackers Prodded by: rwatson 2002-06-13 22:14:37 +00:00			`# $NetBSD: ntpd,v 1.6 2002/03/22 04:33:59 thorpej Exp $`
			`# $FreeBSD$`
Import the NetBSD 1.5 RC system. Note that `rc' and `rc.shutdown' could not be imported because we already have files with those names. 2001-06-16 07:16:14 +00:00			`#`

			`# PROVIDE: ntpd`
"REQUIRE: cleanvar" for all RC's writing into /var/run. 2005-01-16 03:12:03 +00:00			`# REQUIRE: DAEMON cleanvar`
Merge in all the changes that Mike Makonnen has been maintaining for a while. This is only the script pieces, the glue for the build comes next. Submitted by: Mike Makonnen <makonnen@pacbell.net> Reviewed by: silence on -current and -hackers Prodded by: rwatson 2002-06-13 22:14:37 +00:00			`# BEFORE: LOGIN`
Remove the requirement for the FreeBSD keyword as it no longer makes any sense. Discussed with: dougb, brooks MFC after: 3 days 2004-10-07 13:55:26 +00:00			`# KEYWORD: nojail`
Import the NetBSD 1.5 RC system. Note that `rc' and `rc.shutdown' could not be imported because we already have files with those names. 2001-06-16 07:16:14 +00:00
			`. /etc/rc.subr`

Clean up the scripts to use the new variables: xntpd_* -> ntpd_* portmap_* -> rpcbind_* Also change single_mountd_enable -> mountd_enable Changing the mountd flags brings us closer to NetBSD. All of the old variable names are shimmed so you can continue to use the old variable name. Finally make /etc/rc.d/mountd no longer dependent on nfs as there are (apparently) other consumers of mountd. Submitted by: Mike Makonnen <makonnen@pacbell.net> 2002-08-14 05:44:32 +00:00			`name=ntpd`
			rcvar=`set_rcvar`
			`command="/usr/sbin/${name}"`
			`pidfile="/var/run/${name}.pid"`
Stop using ntpdate(1) in our startup proceedure. Replace ntpdate(1) with calls to ntpd -g. ntpd is noticably slower than ntpdate, but is also more accurate. This removes the nasty hackery in rc.d/ntpdate that would parse out ntp servers from /etc/ntp.conf (ntpd knows how to read its own config file). By default, ntpd will sync with its listed time servers. To turn this off so that ntpd does not sync, ntpd_sync_on_start="NO" can be added to /etc/rc.conf. If ntpd is not enabled (the default), then time is not synced on startup. ntpdate's use has been depreciated by the ntpd authors for quite some time so this change shouldn't be unexpected. Suggested by: des Approved by: roberto (resident ntp guru) 2004-09-14 03:01:38 +00:00			`start_precmd="ntpd_precmd"`
Clean up the scripts to use the new variables: xntpd_* -> ntpd_* portmap_* -> rpcbind_* Also change single_mountd_enable -> mountd_enable Changing the mountd flags brings us closer to NetBSD. All of the old variable names are shimmed so you can continue to use the old variable name. Finally make /etc/rc.d/mountd no longer dependent on nfs as there are (apparently) other consumers of mountd. Submitted by: Mike Makonnen <makonnen@pacbell.net> 2002-08-14 05:44:32 +00:00			`required_files="/etc/ntp.conf"`

Merge in all the changes that Mike Makonnen has been maintaining for a while. This is only the script pieces, the glue for the build comes next. Submitted by: Mike Makonnen <makonnen@pacbell.net> Reviewed by: silence on -current and -hackers Prodded by: rwatson 2002-06-13 22:14:37 +00:00			`ntpd_precmd()`
			`{`
Stop using ntpdate(1) in our startup proceedure. Replace ntpdate(1) with calls to ntpd -g. ntpd is noticably slower than ntpdate, but is also more accurate. This removes the nasty hackery in rc.d/ntpdate that would parse out ntp servers from /etc/ntp.conf (ntpd knows how to read its own config file). By default, ntpd will sync with its listed time servers. To turn this off so that ntpd does not sync, ntpd_sync_on_start="NO" can be added to /etc/rc.conf. If ntpd is not enabled (the default), then time is not synced on startup. ntpdate's use has been depreciated by the ntpd authors for quite some time so this change shouldn't be unexpected. Suggested by: des Approved by: roberto (resident ntp guru) 2004-09-14 03:01:38 +00:00			`if checkyesno ntpd_sync_on_start; then`
			`rc_flags="-g ${ntpd_flags}"`
			`fi`

Merge in all the changes that Mike Makonnen has been maintaining for a while. This is only the script pieces, the glue for the build comes next. Submitted by: Mike Makonnen <makonnen@pacbell.net> Reviewed by: silence on -current and -hackers Prodded by: rwatson 2002-06-13 22:14:37 +00:00			`if [ -z "$ntpd_chrootdir" ]; then`
			`return 0;`
			`fi`

			`# If running in a chroot cage, ensure that the appropriate files`
Fix style bugs: * Space -> tabs conversion. * Removed blanks before semicolon in "if ... ; then". * Proper indentation of misindented lines. * Put a full stop after some comments. * Removed whitespace at end of line. Approved by: silence from gordon 2002-10-12 10:31:31 +00:00			`# exist inside the cage, as well as helper symlinks into the cage`
Merge in all the changes that Mike Makonnen has been maintaining for a while. This is only the script pieces, the glue for the build comes next. Submitted by: Mike Makonnen <makonnen@pacbell.net> Reviewed by: silence on -current and -hackers Prodded by: rwatson 2002-06-13 22:14:37 +00:00			`# from outside.`
			`#`
			`# As this is called after the is_running and required_dir checks`
			`# are made in run_rc_command(), we can safely assume ${ntpd_chrootdir}`
			`# exists and ntpd isn't running at this point (unless forcestart`
			`# is used).`
			`#`
			`if [ ! -c "${ntpd_chrootdir}/dev/clockctl" ]; then`
			`rm -f "${ntpd_chrootdir}/dev/clockctl"`
			`( cd /dev ; /bin/pax -rw -pe clockctl "${ntpd_chrootdir}/dev" )`
			`fi`
			`ln -fs "${ntpd_chrootdir}/var/db/ntp.drift" /var/db/ntp.drift`

			`# Change run_rc_commands()'s internal copy of $ntpd_flags`
			`#`
			`rc_flags="-u ntpd:ntpd -i ${ntpd_chrootdir} $rc_flags"`
			`}`

Import the NetBSD 1.5 RC system. Note that `rc' and `rc.shutdown' could not be imported because we already have files with those names. 2001-06-16 07:16:14 +00:00			`load_rc_config $name`
			`run_rc_command "$1"`