freebsd-nq/gnu/usr.bin/gdb/dbxread.c

/*-
 * This code is derived from software copyrighted by the Free Software
 * Foundation.
 *
 * Modified 1991 by Donn Seeley at UUNET Technologies, Inc.
 * Modified 1990 by Van Jacobson at Lawrence Berkeley Laboratory.
 */

#ifndef lint
static char sccsid[] = "@(#)dbxread.c	6.3 (Berkeley) 5/8/91";
#endif /* not lint */

/* Read dbx symbol tables and convert to internal format, for GDB.
   Copyright (C) 1986, 1987, 1988, 1989 Free Software Foundation, Inc.

This file is part of GDB.

GDB is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.

GDB is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GDB; see the file COPYING.  If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */

/* Symbol read-in occurs in two phases:
   1.  A scan (read_dbx_symtab()) of the entire executable, whose sole
       purpose is to make a list of symbols (partial symbol table)
       which will cause symbols
       to be read in if referenced.  This scan happens when the
       "symbol-file" command is given (symbol_file_command()).
   2.  Full read-in of symbols.  (psymtab_to_symtab()).  This happens
       when a symbol in a file for which symbols have not yet been
       read in is referenced.
   2a.  The "add-file" command.  Similar to #2.  */

#include <stdio.h>
#include "defs.h"
#include "param.h"

#ifdef READ_DBX_FORMAT

#ifdef USG
#include <sys/types.h>
#include <fcntl.h>
#define L_SET 0
#define L_INCR 1
#endif

#ifdef COFF_ENCAPSULATE
#include "a.out.encap.h"
#include "stab.gnu.h"
#else
#include <a.out.h>
#include <stab.h>
#endif
#include <ctype.h>

#ifndef NO_GNU_STABS
/*
 * Define specifically gnu symbols here.
 */

/* The following type indicates the definition of a symbol as being
   an indirect reference to another symbol.  The other symbol
   appears as an undefined reference, immediately following this symbol.

   Indirection is asymmetrical.  The other symbol's value will be used
   to satisfy requests for the indirect symbol, but not vice versa.
   If the other symbol does not have a definition, libraries will
   be searched to find a definition.  */
#ifndef N_INDR
#define N_INDR 0xa
#endif

/* The following symbols refer to set elements.
   All the N_SET[ATDB] symbols with the same name form one set.
   Space is allocated for the set in the text section, and each set
   element's value is stored into one word of the space.
   The first word of the space is the length of the set (number of elements).

   The address of the set is made into an N_SETV symbol
   whose name is the same as the name of the set.
   This symbol acts like a N_DATA global symbol
   in that it can satisfy undefined external references.  */

#ifndef N_SETA
#define	N_SETA	0x14		/* Absolute set element symbol */
#endif				/* This is input to LD, in a .o file.  */

#ifndef N_SETT
#define	N_SETT	0x16		/* Text set element symbol */
#endif				/* This is input to LD, in a .o file.  */

#ifndef N_SETD
#define	N_SETD	0x18		/* Data set element symbol */
#endif				/* This is input to LD, in a .o file.  */

#ifndef N_SETB
#define	N_SETB	0x1A		/* Bss set element symbol */
#endif				/* This is input to LD, in a .o file.  */

/* Macros dealing with the set element symbols defined in a.out.h */
#define	SET_ELEMENT_P(x)	((x)>=N_SETA&&(x)<=(N_SETB|N_EXT))
#define TYPE_OF_SET_ELEMENT(x)	((x)-N_SETA+N_ABS)

#ifndef N_SETV
#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
#endif				/* This is output from LD.  */

#ifndef N_WARNING
#define N_WARNING 0x1E		/* Warning message to print if file included */
#endif				/* This is input to ld */

#ifndef __GNU_STAB__

/* Line number for the data section.  This is to be used to describe
   the source location of a variable declaration.  */
#ifndef N_DSLINE
#define N_DSLINE (N_SLINE+N_DATA-N_TEXT)
#endif

/* Line number for the bss section.  This is to be used to describe
   the source location of a variable declaration.  */
#ifndef N_BSLINE
#define N_BSLINE (N_SLINE+N_BSS-N_TEXT)
#endif

#endif /* not __GNU_STAB__ */
#endif /* NO_GNU_STABS */

#include <obstack.h>
#include <sys/param.h>
#include <sys/file.h>
#include <sys/stat.h>

#include "symtab.h"

#ifndef COFF_FORMAT
#ifndef AOUTHDR
#define AOUTHDR		struct exec
#endif
#endif

static void add_symbol_to_list ();
static void read_dbx_symtab ();
static void process_one_symbol ();
static void free_all_psymbols ();
static struct type *read_type ();
static struct type *read_range_type ();
static struct type *read_enum_type ();
static struct type *read_struct_type ();
static struct type *read_array_type ();
static long read_number ();
static void read_huge_number ();
static void finish_block ();
static struct blockvector *make_blockvector ();
static struct symbol *define_symbol ();
static void start_subfile ();
static int hashname ();
static void hash_symsegs ();
static struct pending *copy_pending ();
static void fix_common_block ();

static void add_undefined_type ();
static void cleanup_undefined_types ();

extern char *index();

extern struct symtab *read_symsegs ();
extern void free_all_symtabs ();
extern void free_all_psymtabs ();
extern void free_inclink_symtabs ();

/* C++ */
static struct type **read_args ();

/* Macro to determine which symbols to ignore when reading the first symbol
   of a file.  Some machines override this definition. */
#ifdef N_NSYMS
#ifndef IGNORE_SYMBOL
/* This code is used on Ultrix systems.  Ignore it */
#define IGNORE_SYMBOL(type)  (type == N_NSYMS)
#endif
#else
#ifndef IGNORE_SYMBOL
/* Don't ignore any symbols. */
#define IGNORE_SYMBOL(type) (0)
#endif
#endif /* not N_NSYMS */

/* Macro for number of symbol table entries (in usual a.out format).
   Some machines override this definition.  */
#ifndef NUMBER_OF_SYMBOLS
#ifdef COFF_HEADER
#define NUMBER_OF_SYMBOLS \
  ((COFF_HEADER(hdr) ? hdr.coffhdr.filehdr.f_nsyms : hdr.a_syms) /	\
   sizeof (struct nlist))
#else
#define NUMBER_OF_SYMBOLS (hdr.a_syms / sizeof (struct nlist))
#endif
#endif

/* Macro for file-offset of symbol table (in usual a.out format).  */
#ifndef SYMBOL_TABLE_OFFSET
#define SYMBOL_TABLE_OFFSET N_SYMOFF (hdr)
#endif

/* Macro for file-offset of string table (in usual a.out format).  */
#ifndef STRING_TABLE_OFFSET
#define STRING_TABLE_OFFSET (N_SYMOFF (hdr) + hdr.a_syms)
#endif

/* Macro to store the length of the string table data in INTO.  */
#ifndef READ_STRING_TABLE_SIZE
#define READ_STRING_TABLE_SIZE(INTO)		\
{ val = myread (desc, &INTO, sizeof INTO);	\
  if (val < 0) perror_with_name (name); }
#endif

/* Macro to declare variables to hold the file's header data.  */
#ifndef DECLARE_FILE_HEADERS
#define DECLARE_FILE_HEADERS  AOUTHDR hdr
#endif

/* Macro to read the header data from descriptor DESC and validate it.
   NAME is the file name, for error messages.  */
#ifndef READ_FILE_HEADERS
#ifdef HEADER_SEEK_FD
#define READ_FILE_HEADERS(DESC, NAME)		\
{ HEADER_SEEK_FD (DESC);			\
  val = myread (DESC, &hdr, sizeof hdr);	\
  if (val < 0) perror_with_name (NAME);		\
  if (N_BADMAG (hdr))				\
    error ("File \"%s\" not in executable format.", NAME); }
#else
#define READ_FILE_HEADERS(DESC, NAME)		\
{ val = myread (DESC, &hdr, sizeof hdr);	\
  if (val < 0) perror_with_name (NAME);		\
  if (N_BADMAG (hdr))				\
    error ("File \"%s\" not in executable format.", NAME); }
#endif
#endif

/* Non-zero if this is an object (.o) file, rather than an executable.
   Distinguishing between the two is rarely necessary (and seems like
   a hack, but there is no other way to do ADDR_OF_TEXT_SEGMENT
   right for SunOS).  */
#if !defined (IS_OBJECT_FILE)
/* This will not work
   if someone decides to make ld preserve relocation info.  */
#define IS_OBJECT_FILE (hdr.a_trsize != 0)
#endif

/* Macro for size of text segment */
#ifndef SIZE_OF_TEXT_SEGMENT
#define SIZE_OF_TEXT_SEGMENT hdr.a_text
#endif

/* Get the address in debugged memory of the start
   of the text segment.  */
#if !defined (ADDR_OF_TEXT_SEGMENT)
#if defined (N_TXTADDR)
#define ADDR_OF_TEXT_SEGMENT (IS_OBJECT_FILE ? 0 : N_TXTADDR (hdr))
#else /* no N_TXTADDR */
#define ADDR_OF_TEXT_SEGMENT 0
#endif /* no N_TXTADDR */
#endif /* no ADDR_OF_TEXT_SEGMENT */

/* Macro to get entry point from headers.  */
#ifndef ENTRY_POINT
#define ENTRY_POINT hdr.a_entry
#endif

/* Macro for name of symbol to indicate a file compiled with gcc. */
#ifndef GCC_COMPILED_FLAG_SYMBOL
#define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled."
#endif

/* Convert stab register number (from `r' declaration) to a gdb REGNUM.  */

#ifndef STAB_REG_TO_REGNUM
#define STAB_REG_TO_REGNUM(VALUE) (VALUE)
#endif

/* Define this as 1 if a pcc declaration of a char or short argument
   gives the correct address.  Otherwise assume pcc gives the
   address of the corresponding int, which is not the same on a
   big-endian machine.  */

#ifndef BELIEVE_PCC_PROMOTION
#define BELIEVE_PCC_PROMOTION 0
#endif

/* Nonzero means give verbose info on gdb action.  From main.c.  */
extern int info_verbose;

/* Chain of symtabs made from reading the file's symsegs.
   These symtabs do not go into symtab_list themselves,
   but the information is copied from them when appropriate
   to make the symtabs that will exist permanently.  */

static struct symtab *symseg_chain;

/* Symseg symbol table for the file whose data we are now processing.
   It is one of those in symseg_chain.  Or 0, for a compilation that
   has no symseg.  */

static struct symtab *current_symseg;

/* Name of source file whose symbol data we are now processing.
   This comes from a symbol of type N_SO.  */

static char *last_source_file;

/* Core address of start of text of current source file.
   This too comes from the N_SO symbol.  */

static CORE_ADDR last_source_start_addr;

/* End of the text segment of the executable file,
   as found in the symbol _etext.  */

static CORE_ADDR end_of_text_addr;

/* The list of sub-source-files within the current individual compilation.
   Each file gets its own symtab with its own linetable and associated info,
   but they all share one blockvector.  */

struct subfile
{
  struct subfile *next;
  char *name;
  struct linetable *line_vector;
  int line_vector_length;
  int line_vector_index;
  int prev_line_number;
};

static struct subfile *subfiles;

static struct subfile *current_subfile;

/* Count symbols as they are processed, for error messages.  */

static int symnum;

/* Vector of types defined so far, indexed by their dbx type numbers.
   (In newer sun systems, dbx uses a pair of numbers in parens,
    as in "(SUBFILENUM,NUMWITHINSUBFILE)".  Then these numbers must be
    translated through the type_translations hash table to get
    the index into the type vector.)  */

static struct typevector *type_vector;

/* Number of elements allocated for type_vector currently.  */

static int type_vector_length;

/* Vector of line number information.  */

static struct linetable *line_vector;

/* Index of next entry to go in line_vector_index.  */

static int line_vector_index;

/* Last line number recorded in the line vector.  */

static int prev_line_number;

/* Number of elements allocated for line_vector currently.  */

static int line_vector_length;

/* Hash table of global symbols whose values are not known yet.
   They are chained thru the SYMBOL_VALUE, since we don't
   have the correct data for that slot yet.  */
/* The use of the LOC_BLOCK code in this chain is nonstandard--
   it refers to a FORTRAN common block rather than the usual meaning.  */

#define HASHSIZE 127
static struct symbol *global_sym_chain[HASHSIZE];

/* Record the symbols defined for each context in a list.
   We don't create a struct block for the context until we
   know how long to make it.  */

#define PENDINGSIZE 100

struct pending
{
  struct pending *next;
  int nsyms;
  struct symbol *symbol[PENDINGSIZE];
};

/* List of free `struct pending' structures for reuse.  */
struct pending *free_pendings;

/* Here are the three lists that symbols are put on.  */

struct pending *file_symbols;	/* static at top level, and types */

struct pending *global_symbols;	/* global functions and variables */

struct pending *local_symbols;	/* everything local to lexical context */

/* List of symbols declared since the last BCOMM.  This list is a tail
   of local_symbols.  When ECOMM is seen, the symbols on the list
   are noted so their proper addresses can be filled in later,
   using the common block base address gotten from the assembler
   stabs.  */

struct pending *common_block;
int common_block_i;

/* Stack representing unclosed lexical contexts
   (that will become blocks, eventually).  */

struct context_stack
{
  struct pending *locals;
  struct pending_block *old_blocks;
  struct symbol *name;
  CORE_ADDR start_addr;
  int depth;
};

struct context_stack *context_stack;

/* Index of first unused entry in context stack.  */
int context_stack_depth;

/* Currently allocated size of context stack.  */

int context_stack_size;

/* Nonzero if within a function (so symbols should be local,
   if nothing says specifically).  */

int within_function;

/* List of blocks already made (lexical contexts already closed).
   This is used at the end to make the blockvector.  */

struct pending_block
{
  struct pending_block *next;
  struct block *block;
};

struct pending_block *pending_blocks;

extern CORE_ADDR startup_file_start;	/* From blockframe.c */
extern CORE_ADDR startup_file_end;	/* From blockframe.c */

/* File name symbols were loaded from.  */

static char *symfile;

/* Low and high symbol values (inclusive) for the global variable
   entries in the symbol file. */

static int first_global_sym, last_global_sym;

/* Structures with which to manage partial symbol allocation.  */

struct psymbol_allocation_list global_psymbols, static_psymbols;

/* Global variable which, when set, indicates that we are processing a
   .o file compiled with gcc */

static unsigned char processing_gcc_compilation;

/* Make a list of forward references which haven't been defined.  */
static struct type **undef_types;
static int undef_types_allocated, undef_types_length;

  /* Setup a define to deal cleanly with the underscore problem */

#ifdef NAMES_HAVE_UNDERSCORE
#define HASH_OFFSET 1
#else
#define HASH_OFFSET 0
#endif

#if 0
/* I'm not sure why this is here.  To debug bugs which cause
   an infinite loop of allocations, I suppose.  In any event,
   dumping core when out of memory isn't usually right.  */
static int
xxmalloc (n)
{
  int v = malloc (n);
  if (v == 0)
    {
      fprintf (stderr, "Virtual memory exhausted.\n");
      abort ();
    }
  return v;
}
#else /* not 0 */
#define xxmalloc xmalloc
#endif /* not 0 */

/* Make a copy of the string at PTR with SIZE characters in the symbol obstack
   (and add a null character at the end in the copy).
   Returns the address of the copy.  */

static char *
obsavestring (ptr, size)
     char *ptr;
     int size;
{
  register char *p = (char *) obstack_alloc (symbol_obstack, size + 1);
  /* Open-coded bcopy--saves function call time.
     These strings are usually short.  */
  {
    register char *p1 = ptr;
    register char *p2 = p;
    char *end = ptr + size;
    while (p1 != end)
      *p2++ = *p1++;
  }
  p[size] = 0;
  return p;
}

/* Concatenate strings S1, S2 and S3; return the new string.
   Space is found in the symbol_obstack.  */

static char *
obconcat (s1, s2, s3)
     char *s1, *s2, *s3;
{
  register int len = strlen (s1) + strlen (s2) + strlen (s3) + 1;
  register char *val = (char *) obstack_alloc (symbol_obstack, len);
  strcpy (val, s1);
  strcat (val, s2);
  strcat (val, s3);
  return val;
}

/* Support for Sun changes to dbx symbol format */

/* For each identified header file, we have a table of types defined
   in that header file.

   header_files maps header file names to their type tables.
   It is a vector of n_header_files elements.
   Each element describes one header file.
   It contains a vector of types.

   Sometimes it can happen that the same header file produces
   different results when included in different places.
   This can result from conditionals or from different
   things done before including the file.
   When this happens, there are multiple entries for the file in this table,
   one entry for each distinct set of results.
   The entries are distinguished by the INSTANCE field.
   The INSTANCE field appears in the N_BINCL and N_EXCL symbol table and is
   used to match header-file references to their corresponding data.  */

struct header_file
{
  char *name;			/* Name of header file */
  int instance;			/* Numeric code distinguishing instances
				   of one header file that produced
				   different results when included.
				   It comes from the N_BINCL or N_EXCL.  */
  struct type **vector;		/* Pointer to vector of types */
  int length;			/* Allocated length (# elts) of that vector */
};

static struct header_file *header_files;

static int n_header_files;

static int n_allocated_header_files;

/* During initial symbol readin, we need to have a structure to keep
   track of which psymtabs have which bincls in them.  This structure
   is used during readin to setup the list of dependencies within each
   partial symbol table. */

struct header_file_location
{
  char *name;			/* Name of header file */
  int instance;			/* See above */
  struct partial_symtab *pst;	/* Partial symtab that has the
				   BINCL/EINCL defs for this file */
};

/* The actual list and controling variables */
static struct header_file_location *bincl_list, *next_bincl;
static int bincls_allocated;

/* Within each object file, various header files are assigned numbers.
   A type is defined or referred to with a pair of numbers
   (FILENUM,TYPENUM) where FILENUM is the number of the header file
   and TYPENUM is the number within that header file.
   TYPENUM is the index within the vector of types for that header file.

   FILENUM == 1 is special; it refers to the main source of the object file,
   and not to any header file.  FILENUM != 1 is interpreted by looking it up
   in the following table, which contains indices in header_files.  */

static int *this_object_header_files;

static int n_this_object_header_files;

static int n_allocated_this_object_header_files;

/* When a header file is getting special overriding definitions
   for one source file, record here the header_files index
   of its normal definition vector.
   At other times, this is -1.  */

static int header_file_prev_index;

/* At the start of reading dbx symbols, allocate our tables.  */

static void
init_header_files ()
{
  n_allocated_header_files = 10;
  header_files = (struct header_file *) xxmalloc (10 * sizeof (struct header_file));
  n_header_files = 0;

  n_allocated_this_object_header_files = 10;
  this_object_header_files = (int *) xxmalloc (10 * sizeof (int));
}

/* At the end of reading dbx symbols, free our tables.  */

static void
free_header_files ()
{
  register int i;
  for (i = 0; i < n_header_files; i++)
    free (header_files[i].name);
  if (header_files) free (header_files);
  if (this_object_header_files)
    free (this_object_header_files);
}

/* Called at the start of each object file's symbols.
   Clear out the mapping of header file numbers to header files.  */

static void
new_object_header_files ()
{
  /* Leave FILENUM of 0 free for builtin types and this file's types.  */
  n_this_object_header_files = 1;
  header_file_prev_index = -1;
}

/* Add header file number I for this object file
   at the next successive FILENUM.  */

static void
add_this_object_header_file (i)
     int i;
{
  if (n_this_object_header_files == n_allocated_this_object_header_files)
    {
      n_allocated_this_object_header_files *= 2;
      this_object_header_files
	= (int *) xrealloc (this_object_header_files,
			    n_allocated_this_object_header_files * sizeof (int));
    }

  this_object_header_files[n_this_object_header_files++] = i;
}

/* Add to this file an "old" header file, one already seen in
   a previous object file.  NAME is the header file's name.
   INSTANCE is its instance code, to select among multiple
   symbol tables for the same header file.  */

static void
add_old_header_file (name, instance)
     char *name;
     int instance;
{
  register struct header_file *p = header_files;
  register int i;

  for (i = 0; i < n_header_files; i++)
    if (!strcmp (p[i].name, name) && instance == p[i].instance)
      {
	add_this_object_header_file (i);
	return;
      }
  error ("Invalid symbol data: \"repeated\" header file that hasn't been seen before, at symtab pos %d.",
	 symnum);
}

/* Add to this file a "new" header file: definitions for its types follow.
   NAME is the header file's name.
   Most often this happens only once for each distinct header file,
   but not necessarily.  If it happens more than once, INSTANCE has
   a different value each time, and references to the header file
   use INSTANCE values to select among them.

   dbx output contains "begin" and "end" markers for each new header file,
   but at this level we just need to know which files there have been;
   so we record the file when its "begin" is seen and ignore the "end".  */

static void
add_new_header_file (name, instance)
     char *name;
     int instance;
{
  register int i;
  register struct header_file *p = header_files;
  header_file_prev_index = -1;

#if 0
  /* This code was used before I knew about the instance codes.
     My first hypothesis is that it is not necessary now
     that instance codes are handled.  */

  /* Has this header file a previous definition?
     If so, make a new entry anyway so that this use in this source file
     gets a separate entry.  Later source files get the old entry.
     Record here the index of the old entry, so that any type indices
     not previously defined can get defined in the old entry as
     well as in the new one.  */

  for (i = 0; i < n_header_files; i++)
    if (!strcmp (p[i].name, name))
      {
	header_file_prev_index = i;
      }

#endif

  /* Make sure there is room for one more header file.  */

  if (n_header_files == n_allocated_header_files)
    {
      n_allocated_header_files *= 2;
      header_files = (struct header_file *)
	xrealloc (header_files,
		  (n_allocated_header_files
		   * sizeof (struct header_file)));
    }

  /* Create an entry for this header file.  */

  i = n_header_files++;
  header_files[i].name = savestring (name, strlen(name));
  header_files[i].instance = instance;
  header_files[i].length = 10;
  header_files[i].vector
    = (struct type **) xxmalloc (10 * sizeof (struct type *));
  bzero (header_files[i].vector, 10 * sizeof (struct type *));

  add_this_object_header_file (i);
}

/* Look up a dbx type-number pair.  Return the address of the slot
   where the type for that number-pair is stored.
   The number-pair is in TYPENUMS.

   This can be used for finding the type associated with that pair
   or for associating a new type with the pair.  */

static struct type **
dbx_lookup_type (typenums)
     int typenums[2];
{
  register int filenum = typenums[0], index = typenums[1];

  if (filenum < 0 || filenum >= n_this_object_header_files)
    error ("Invalid symbol data: type number (%d,%d) out of range at symtab pos %d.",
	   filenum, index, symnum);

  if (filenum == 0)
    {
      /* Type is defined outside of header files.
	 Find it in this object file's type vector.  */
      if (index >= type_vector_length)
	{
	  type_vector_length *= 2;
	  type_vector = (struct typevector *)
	    xrealloc (type_vector,
		      (sizeof (struct typevector)
		       + type_vector_length * sizeof (struct type *)));
	  bzero (&type_vector->type[type_vector_length / 2],
		 type_vector_length * sizeof (struct type *) / 2);
	}
      return &type_vector->type[index];
    }
  else
    {
      register int real_filenum = this_object_header_files[filenum];
      register struct header_file *f;

      if (real_filenum >= n_header_files)
	abort ();

      f = &header_files[real_filenum];

      if (index >= f->length)
	{
	  f->length *= 2;
	  f->vector = (struct type **)
	    xrealloc (f->vector, f->length * sizeof (struct type *));
	  bzero (&f->vector[f->length / 2],
		 f->length * sizeof (struct type *) / 2);
	}
      return &f->vector[index];
    }
}

/* Create a type object.  Occaisionally used when you need a type
   which isn't going to be given a type number.  */

static struct type *
dbx_create_type ()
{
  register struct type *type =
    (struct type *) obstack_alloc (symbol_obstack, sizeof (struct type));

  bzero (type, sizeof (struct type));
  TYPE_VPTR_FIELDNO (type) = -1;
  return type;
}

/* Make sure there is a type allocated for type numbers TYPENUMS
   and return the type object.
   This can create an empty (zeroed) type object.
   TYPENUMS may be (-1, -1) to return a new type object that is not
   put into the type vector, and so may not be referred to by number. */

static struct type *
dbx_alloc_type (typenums)
     int typenums[2];
{
  register struct type **type_addr;
  register struct type *type;

  if (typenums[1] != -1)
    {
      type_addr = dbx_lookup_type (typenums);
      type = *type_addr;
    }
  else
    {
      type_addr = 0;
      type = 0;
    }

  /* If we are referring to a type not known at all yet,
     allocate an empty type for it.
     We will fill it in later if we find out how.  */
  if (type == 0)
    {
      type = dbx_create_type ();
      if (type_addr)
	*type_addr = type;
    }
  
  return type;
}

#if 0
static struct type **
explicit_lookup_type (real_filenum, index)
     int real_filenum, index;
{
  register struct header_file *f = &header_files[real_filenum];

  if (index >= f->length)
    {
      f->length *= 2;
      f->vector = (struct type **)
	xrealloc (f->vector, f->length * sizeof (struct type *));
      bzero (&f->vector[f->length / 2],
	     f->length * sizeof (struct type *) / 2);
    }
  return &f->vector[index];
}
#endif

/* maintain the lists of symbols and blocks */

/* Add a symbol to one of the lists of symbols.  */
static void
add_symbol_to_list (symbol, listhead)
     struct symbol *symbol;
     struct pending **listhead;
{
  /* We keep PENDINGSIZE symbols in each link of the list.
     If we don't have a link with room in it, add a new link.  */
  if (*listhead == 0 || (*listhead)->nsyms == PENDINGSIZE)
    {
      register struct pending *link;
      if (free_pendings)
	{
	  link = free_pendings;
	  free_pendings = link->next;
	}
      else
	link = (struct pending *) xxmalloc (sizeof (struct pending));

      link->next = *listhead;
      *listhead = link;
      link->nsyms = 0;
    }

  (*listhead)->symbol[(*listhead)->nsyms++] = symbol;
}

/* At end of reading syms, or in case of quit,
   really free as many `struct pending's as we can easily find.  */

static void
really_free_pendings ()
{
  struct pending *next, *next1;
  struct pending_block *bnext, *bnext1;

  for (next = free_pendings; next; next = next1)
    {
      next1 = next->next;
      free (next);
    }
  free_pendings = 0;

  for (bnext = pending_blocks; bnext; bnext = bnext1)
    {
      bnext1 = bnext->next;
      free (bnext);
    }
  pending_blocks = 0;

  for (next = file_symbols; next; next = next1)
    {
      next1 = next->next;
      free (next);
    }
  for (next = global_symbols; next; next = next1)
    {
      next1 = next->next;
      free (next);
    }
}

/* Take one of the lists of symbols and make a block from it.
   Keep the order the symbols have in the list (reversed from the input file).
   Put the block on the list of pending blocks.  */

static void
finish_block (symbol, listhead, old_blocks, start, end)
     struct symbol *symbol;
     struct pending **listhead;
     struct pending_block *old_blocks;
     CORE_ADDR start, end;
{
  register struct pending *next, *next1;
  register struct block *block;
  register struct pending_block *pblock;
  struct pending_block *opblock;
  register int i;

  /* Count the length of the list of symbols.  */

  for (next = *listhead, i = 0; next; i += next->nsyms, next = next->next);

  block = (struct block *) obstack_alloc (symbol_obstack,
					  (sizeof (struct block)
					   + ((i - 1)
					      * sizeof (struct symbol *))));

  /* Copy the symbols into the block.  */

  BLOCK_NSYMS (block) = i;
  for (next = *listhead; next; next = next->next)
    {
      register int j;
      for (j = next->nsyms - 1; j >= 0; j--)
	BLOCK_SYM (block, --i) = next->symbol[j];
    }

  BLOCK_START (block) = start;
  BLOCK_END (block) = end;
  BLOCK_SUPERBLOCK (block) = 0;	/* Filled in when containing block is made */
  BLOCK_GCC_COMPILED (block) = processing_gcc_compilation;

  /* Put the block in as the value of the symbol that names it.  */

  if (symbol)
    {
      SYMBOL_BLOCK_VALUE (symbol) = block;
      BLOCK_FUNCTION (block) = symbol;
    }
  else
    BLOCK_FUNCTION (block) = 0;

  /* Now "free" the links of the list, and empty the list.  */

  for (next = *listhead; next; next = next1)
    {
      next1 = next->next;
      next->next = free_pendings;
      free_pendings = next;
    }
  *listhead = 0;

  /* Install this block as the superblock
     of all blocks made since the start of this scope
     that don't have superblocks yet.  */

  opblock = 0;
  for (pblock = pending_blocks; pblock != old_blocks; pblock = pblock->next)
    {
      if (BLOCK_SUPERBLOCK (pblock->block) == 0)
	BLOCK_SUPERBLOCK (pblock->block) = block;
      opblock = pblock;
    }

  /* Record this block on the list of all blocks in the file.
     Put it after opblock, or at the beginning if opblock is 0.
     This puts the block in the list after all its subblocks.  */

  /* Allocate in the symbol_obstack to save time.
     It wastes a little space.  */
  pblock = (struct pending_block *)
    obstack_alloc (symbol_obstack,
		   sizeof (struct pending_block));
  pblock->block = block;
  if (opblock)
    {
      pblock->next = opblock->next;
      opblock->next = pblock;
    }
  else
    {
      pblock->next = pending_blocks;
      pending_blocks = pblock;
    }
}

static struct blockvector *
make_blockvector ()
{
  register struct pending_block *next, *next1;
  register struct blockvector *blockvector;
  register int i;

  /* Count the length of the list of blocks.  */

  for (next = pending_blocks, i = 0; next; next = next->next, i++);

  blockvector = (struct blockvector *)
    obstack_alloc (symbol_obstack,
		   (sizeof (struct blockvector)
		    + (i - 1) * sizeof (struct block *)));

  /* Copy the blocks into the blockvector.
     This is done in reverse order, which happens to put
     the blocks into the proper order (ascending starting address).
     finish_block has hair to insert each block into the list
     after its subblocks in order to make sure this is true.  */

  BLOCKVECTOR_NBLOCKS (blockvector) = i;
  for (next = pending_blocks; next; next = next->next)
    BLOCKVECTOR_BLOCK (blockvector, --i) = next->block;

#if 0 /* Now we make the links in the obstack, so don't free them.  */
  /* Now free the links of the list, and empty the list.  */

  for (next = pending_blocks; next; next = next1)
    {
      next1 = next->next;
      free (next);
    }
#endif
  pending_blocks = 0;

  return blockvector;
}

/* Manage the vector of line numbers.  */

static void
record_line (line, pc)
     int line;
     CORE_ADDR pc;
{
  struct linetable_entry *e;
  /* Ignore the dummy line number in libg.o */

  if (line == 0xffff)
    return;

  /* Make sure line vector is big enough.  */

  if (line_vector_index + 1 >= line_vector_length)
    {
      line_vector_length *= 2;
      line_vector = (struct linetable *)
	xrealloc (line_vector,
		  (sizeof (struct linetable)
		   + line_vector_length * sizeof (struct linetable_entry)));
      current_subfile->line_vector = line_vector;
    }

  e = line_vector->item + line_vector_index++;
  e->line = line; e->pc = pc;
}

/* Start a new symtab for a new source file.
   This is called when a dbx symbol of type N_SO is seen;
   it indicates the start of data for one original source file.  */

static void
start_symtab (name, start_addr)
     char *name;
     CORE_ADDR start_addr;
{
  register struct symtab *s;

  last_source_file = name;
  last_source_start_addr = start_addr;
  file_symbols = 0;
  global_symbols = 0;
  within_function = 0;

  /* Context stack is initially empty, with room for 10 levels.  */
  context_stack
    = (struct context_stack *) xxmalloc (10 * sizeof (struct context_stack));
  context_stack_size = 10;
  context_stack_depth = 0;

  new_object_header_files ();

  for (s = symseg_chain; s; s = s->next)
    if (s->ldsymoff == symnum * sizeof (struct nlist))
      break;
  current_symseg = s;
  if (s != 0)
    return;

  type_vector_length = 160;
  type_vector = (struct typevector *)
    xxmalloc (sizeof (struct typevector)
	      + type_vector_length * sizeof (struct type *));
  bzero (type_vector->type, type_vector_length * sizeof (struct type *));

  /* Initialize the list of sub source files with one entry
     for this file (the top-level source file).  */

  subfiles = 0;
  current_subfile = 0;
  start_subfile (name);

#if 0 /* This is now set at the beginning of read_ofile_symtab */
  /* Set default for compiler to pcc; assume that we aren't processing
     a gcc compiled file until proved otherwise.  */

  processing_gcc_compilation = 0;
#endif
}

/* Handle an N_SOL symbol, which indicates the start of
   code that came from an included (or otherwise merged-in)
   source file with a different name.  */

static void
start_subfile (name)
     char *name;
{
  register struct subfile *subfile;

  /* Save the current subfile's line vector data.  */

  if (current_subfile)
    {
      current_subfile->line_vector_index = line_vector_index;
      current_subfile->line_vector_length = line_vector_length;
      current_subfile->prev_line_number = prev_line_number;
    }

  /* See if this subfile is already known as a subfile of the
     current main source file.  */

  for (subfile = subfiles; subfile; subfile = subfile->next)
    {
      if (!strcmp (subfile->name, name))
	{
	  line_vector = subfile->line_vector;
	  line_vector_index = subfile->line_vector_index;
	  line_vector_length = subfile->line_vector_length;
	  prev_line_number = subfile->prev_line_number;
	  current_subfile = subfile;
	  return;
	}
    }

  /* This subfile is not known.  Add an entry for it.  */

  line_vector_index = 0;
  line_vector_length = 1000;
  prev_line_number = -2;	/* Force first line number to be explicit */
  line_vector = (struct linetable *)
    xxmalloc (sizeof (struct linetable)
	      + line_vector_length * sizeof (struct linetable_entry));

  /* Make an entry for this subfile in the list of all subfiles
     of the current main source file.  */

  subfile = (struct subfile *) xxmalloc (sizeof (struct subfile));
  subfile->next = subfiles;
  subfile->name = savestring (name, strlen (name));
  subfile->line_vector = line_vector;
  subfiles = subfile;
  current_subfile = subfile;
}

/* Finish the symbol definitions for one main source file,
   close off all the lexical contexts for that file
   (creating struct block's for them), then make the struct symtab
   for that file and put it in the list of all such.

   END_ADDR is the address of the end of the file's text.  */

static void
end_symtab (end_addr)
     CORE_ADDR end_addr;
{
  register struct symtab *symtab;
  register struct blockvector *blockvector;
  register struct subfile *subfile;
  register struct linetable *lv;
  struct subfile *nextsub;

  if (current_symseg != 0)
    {
      last_source_file = 0;
      current_symseg = 0;
      return;
    }

  /* Finish the lexical context of the last function in the file;
     pop the context stack.  */

  if (context_stack_depth > 0)
    {
      register struct context_stack *cstk;
      context_stack_depth--;
      cstk = &context_stack[context_stack_depth];
      /* Make a block for the local symbols within.  */
      finish_block (cstk->name, &local_symbols, cstk->old_blocks,
		    cstk->start_addr, end_addr);
    }

  /* Cleanup any undefined types that have been left hanging around
     (this needs to be done before the finish_blocks so that
     file_symbols is still good).  */
  cleanup_undefined_types ();

  /* Finish defining all the blocks of this symtab.  */
  finish_block (0, &file_symbols, 0, last_source_start_addr, end_addr);
  finish_block (0, &global_symbols, 0, last_source_start_addr, end_addr);
  blockvector = make_blockvector ();

  current_subfile->line_vector_index = line_vector_index;

  /* Now create the symtab objects proper, one for each subfile.  */
  /* (The main file is one of them.)  */

  for (subfile = subfiles; subfile; subfile = nextsub)
    {
      symtab = (struct symtab *) xxmalloc (sizeof (struct symtab));
      symtab->free_ptr = 0;

      /* Fill in its components.  */
      symtab->blockvector = blockvector;
      type_vector->length = type_vector_length;
      symtab->typevector = type_vector;
      symtab->free_code = free_linetable;
      if (subfile->next == 0)
	symtab->free_ptr = (char *) type_vector;

      symtab->filename = subfile->name;
      lv = subfile->line_vector;
      lv->nitems = subfile->line_vector_index;
      symtab->linetable = (struct linetable *)
	xrealloc (lv, (sizeof (struct linetable)
		       + lv->nitems * sizeof (struct linetable_entry)));
      symtab->nlines = 0;
      symtab->line_charpos = 0;

      /* Link the new symtab into the list of such.  */
      symtab->next = symtab_list;
      symtab_list = symtab;

      nextsub = subfile->next;
      free (subfile);
    }

  type_vector = 0;
  type_vector_length = -1;
  line_vector = 0;
  line_vector_length = -1;
  last_source_file = 0;
}

#ifdef N_BINCL

/* Handle the N_BINCL and N_EINCL symbol types
   that act like N_SOL for switching source files
   (different subfiles, as we call them) within one object file,
   but using a stack rather than in an arbitrary order.  */

struct subfile_stack
{
  struct subfile_stack *next;
  char *name;
  int prev_index;
};

struct subfile_stack *subfile_stack;

static void
push_subfile ()
{
  register struct subfile_stack *tem
    = (struct subfile_stack *) xxmalloc (sizeof (struct subfile_stack));

  tem->next = subfile_stack;
  subfile_stack = tem;
  if (current_subfile == 0 || current_subfile->name == 0)
    abort ();
  tem->name = current_subfile->name;
  tem->prev_index = header_file_prev_index;
}

static char *
pop_subfile ()
{
  register char *name;
  register struct subfile_stack *link = subfile_stack;

  if (link == 0)
    abort ();

  name = link->name;
  subfile_stack = link->next;
  header_file_prev_index = link->prev_index;
  free (link);

  return name;
}
#endif /* Have N_BINCL */

/* Accumulate the misc functions in bunches of 127.
   At the end, copy them all into one newly allocated structure.  */

#define MISC_BUNCH_SIZE 127

struct misc_bunch
{
  struct misc_bunch *next;
  struct misc_function contents[MISC_BUNCH_SIZE];
};

/* Bunch currently being filled up.
   The next field points to chain of filled bunches.  */

static struct misc_bunch *misc_bunch;

/* Number of slots filled in current bunch.  */

static int misc_bunch_index;

/* Total number of misc functions recorded so far.  */

static int misc_count;

static void
init_misc_functions ()
{
  misc_count = 0;
  misc_bunch = 0;
  misc_bunch_index = MISC_BUNCH_SIZE;
}

static void
record_misc_function (name, address, type)
     char *name;
     CORE_ADDR address;
     int type;
{
  register struct misc_bunch *new;
  register unsigned char mtype;

  if (misc_bunch_index == MISC_BUNCH_SIZE)
    {
      new = (struct misc_bunch *) xxmalloc (sizeof (struct misc_bunch));
      misc_bunch_index = 0;
      new->next = misc_bunch;
      misc_bunch = new;
    }
  misc_bunch->contents[misc_bunch_index].name = name;
  misc_bunch->contents[misc_bunch_index].address = address;
  switch (type &~ N_EXT)
    {
    case N_TEXT:  mtype = mf_text; break;
    case N_DATA:  mtype = mf_data; break;
    case N_BSS:   mtype = mf_bss;  break;
    case N_ABS:   mtype = mf_abs;  break;
#ifdef N_SETV
    case N_SETV:  mtype = mf_data; break;
#endif
    default:      mtype = mf_unknown; break;
    }
  misc_bunch->contents[misc_bunch_index].type = mtype;
  misc_bunch_index++;
  misc_count++;
}

static int
compare_misc_functions (fn1, fn2)
     struct misc_function *fn1, *fn2;
{
  /* Return a signed result based on unsigned comparisons
     so that we sort into unsigned numeric order.  */
  if (fn1->address < fn2->address)
    return -1;
  if (fn1->address > fn2->address)
    return 1;
  return 0;
}

static void
discard_misc_bunches ()
{
  register struct misc_bunch *next;

  while (misc_bunch)
    {
      next = misc_bunch->next;
      free (misc_bunch);
      misc_bunch = next;
    }
}

/* INCLINK nonzero means bunches are from an incrementally-linked file.
   Add them to the existing bunches.
   Otherwise INCLINK is zero, and we start from scratch. */
static void
condense_misc_bunches (inclink)
     int inclink;
{
  register int i, j;
  register struct misc_bunch *bunch;
#ifdef NAMES_HAVE_UNDERSCORE
  int offset = 1;
#else
  int offset = 0;
#endif

  if (inclink)
    {
      misc_function_vector
	= (struct misc_function *)
	  xrealloc (misc_function_vector, (misc_count + misc_function_count)
		    * sizeof (struct misc_function));
      j = misc_function_count;
    }
  else
    {
      misc_function_vector
	= (struct misc_function *)
	  xxmalloc (misc_count * sizeof (struct misc_function));
      j = 0;
    }

  bunch = misc_bunch;
  while (bunch)
    {
      for (i = 0; i < misc_bunch_index; i++)
	{
	  misc_function_vector[j] = bunch->contents[i];
	  misc_function_vector[j].name
	    = obconcat (misc_function_vector[j].name
			+ (misc_function_vector[j].name[0] == '_' ? offset : 0),
			"", "");
	  j++;
	}
      bunch = bunch->next;
      misc_bunch_index = MISC_BUNCH_SIZE;
    }

  if (inclink)
    misc_function_count += misc_count;
  else
    misc_function_count = j;

  /* Sort the misc functions by address.  */

  qsort (misc_function_vector, misc_function_count,
	 sizeof (struct misc_function),
	 compare_misc_functions);

  /* (re)build the hash table (positions changed during the sort) */

  for (i = 0; i < MISC_FUNC_HASH_SIZE; ++i)
    misc_function_hash_tab[i] = -1;
  for (i = 0; i < misc_function_count; ++i)
    {
      j = hash_symbol(misc_function_vector[i].name) & (MISC_FUNC_HASH_SIZE - 1);
      misc_function_vector[i].next = misc_function_hash_tab[j];
      misc_function_hash_tab[j] = i;
    }
}

/* Call sort_syms to sort alphabetically
   the symbols of each block of each symtab.  */

static int
compare_symbols (s1, s2)
     struct symbol **s1, **s2;
{
  register int namediff;

  /* Compare the initial characters.  */
  namediff = SYMBOL_NAME (*s1)[0] - SYMBOL_NAME (*s2)[0];
  if (namediff != 0) return namediff;

  /* If they match, compare the rest of the names.  */
  namediff = strcmp (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2));
  if (namediff != 0) return namediff;

  /* For symbols of the same name, registers should come first.  */
  return ((SYMBOL_CLASS (*s2) == LOC_REGISTER)
	  - (SYMBOL_CLASS (*s1) == LOC_REGISTER));
}

static void sort_symtab_syms ();

static void
sort_syms ()
{
  register struct symtab *s;

  for (s = symtab_list; s; s = s->next)
    sort_symtab_syms (s);
}

static void
sort_symtab_syms (s)
     register struct symtab *s;
{
  register struct blockvector *bv = BLOCKVECTOR (s);
  int nbl = BLOCKVECTOR_NBLOCKS (bv);
  int i;
  register struct block *b;

  /* Note that in the following sort, we always make sure that
     register debug symbol declarations always come before regular
     debug symbol declarations (as might happen when parameters are
     then put into registers by the compiler).  We do this by a
     correct compare in compare_symbols, and by the reversal of the
     symbols if we don't sort.  This works as long as a register debug
     symbol always comes after a parameter debug symbol. */

  /* This is no longer necessary; lookup_block_symbol now always
     prefers some other declaration over a parameter declaration.  We
     still sort the thing (that is necessary), but we don't reverse it
     if we shouldn't sort it.  */

  for (i = 0; i < nbl; i++)
    {
      b = BLOCKVECTOR_BLOCK (bv, i);
      if (BLOCK_SHOULD_SORT (b))
	qsort (&BLOCK_SYM (b, 0), BLOCK_NSYMS (b),
	       sizeof (struct symbol *), compare_symbols);
    }
}


extern struct symtab *psymtab_to_symtab ();

/* The entry point.  */
static CORE_ADDR entry_point;

static char *symfile_string_table;
static int symfile_string_table_size;

/* This is the symbol-file command.  Read the file, analyze its symbols,
   and add a struct symtab to symtab_list.  */

void
symbol_file_command (name, from_tty)
     char *name;
     int from_tty;
{
  register int desc;
  DECLARE_FILE_HEADERS;
  struct nlist *nlist;

  /* The string table.  */
  char *stringtab;
  
  /* The size of the string table (buffer is a bizarre name...).  */
  long buffer;
  
  register int val;
  extern void close ();
  struct cleanup *old_chain;
  struct symtab *symseg;
  struct stat statbuf;

  dont_repeat ();

  if (name == 0)
    {
      if ((symtab_list || partial_symtab_list)
	  && from_tty
	  && !query ("Discard symbol table? ", 0))
	error ("Not confirmed.");
      if (symfile)
	free (symfile);
      symfile = 0;
      free_all_symtabs ();
      free_all_psymtabs ();
      return;
    }

  name = tilde_expand (name);
  make_cleanup (free, name);

  if ((symtab_list || partial_symtab_list)
      && !query ("Load new symbol table from \"%s\"? ", name))
    error ("Not confirmed.");

  {
    char *absolute_name;
    desc = openp (getenv ("PATH"), 1, name, O_RDONLY, 0, &absolute_name);
    if (desc < 0)
      perror_with_name (name);
    else
      name = absolute_name;
  }

  old_chain = make_cleanup (close, desc);
  make_cleanup (free_current_contents, &name);

  READ_FILE_HEADERS (desc, name);

  entry_point = ENTRY_POINT;

  if (NUMBER_OF_SYMBOLS == 0)
    {
      if (symfile)
	free (symfile);
      symfile = 0;
      free_all_symtabs ();
      free_all_psymtabs ();
      printf ("%s has no symbol-table; symbols discarded.\n", name);
      fflush (stdout);
      do_cleanups (old_chain);
      return;
    }

  printf ("Reading symbol data from %s...", name);
  fflush (stdout);

  /* Now read the string table, all at once.  */
  val = lseek (desc, STRING_TABLE_OFFSET, 0);
  if (val < 0)
    perror_with_name (name);
  if (stat (name, &statbuf) == -1)
    perror_with_name (name);
  READ_STRING_TABLE_SIZE (buffer);
  if (buffer >= 0 && buffer < statbuf.st_size)
    {
      /* This should speed things up without consuming much
	 extra memory (because probably little of the space is going
	 to be reused anyway, whether in data or stack space).

	 A quick test (running GDB on itself and setting 9 breakpoints
	 in different files) showed that memory usage was almost
	 identical for the two cases.  */
#if 0
#ifdef BROKEN_LARGE_ALLOCA
      stringtab = (char *) xmalloc (buffer);
      make_cleanup (free, stringtab);
#else
      stringtab = (char *) alloca (buffer);
#endif
#endif
      stringtab = (char *) xmalloc (buffer);
      symfile_string_table = stringtab;
      symfile_string_table_size = buffer;
    }
  else
    stringtab = NULL;
  if (stringtab == NULL)
    error ("ridiculous string table size: %d bytes", buffer);

  /* Usually READ_STRING_TABLE_SIZE will have shifted the file pointer.
     Occaisionally, it won't.  */
  val = lseek (desc, STRING_TABLE_OFFSET, L_SET);
  if (val < 0)
    perror_with_name (name);
  val = myread (desc, stringtab, buffer);
  if (val < 0)
    perror_with_name (name);
  
  /* Throw away the old symbol table.  */

  if (symfile)
    free (symfile);
  symfile = 0;
  free_all_symtabs ();
  free_all_psymtabs ();

  /* Empty the hash table of global syms looking for values.  */
  bzero (global_sym_chain, sizeof global_sym_chain);

  /* Symsegs are no longer supported by GDB.  Setting symseg_chain to
     0 is easier than finding all the symseg code and eliminating it.  */
  symseg_chain = 0;

  /* Position to read the symbol table.  Do not read it all at once. */
  val = lseek (desc, SYMBOL_TABLE_OFFSET, 0);
  if (val < 0)
    perror_with_name (name);

  /* Don't put these on the cleanup chain; they need to stick around
     until the next call to symbol_file_command.  *Then* we'll free
     them. */
  free_header_files ();
  init_header_files ();

  init_misc_functions ();
  make_cleanup (discard_misc_bunches, 0);

  free_pendings = 0;
  pending_blocks = 0;
  file_symbols = 0;
  global_symbols = 0;
  make_cleanup (really_free_pendings, 0);

  /* Now that the symbol table data of the executable file are all in core,
     process them and define symbols accordingly.  Closes desc.  */

  read_dbx_symtab (desc, stringtab, buffer, NUMBER_OF_SYMBOLS, 0,
		   ADDR_OF_TEXT_SEGMENT, SIZE_OF_TEXT_SEGMENT);

  /* Go over the misc functions and install them in vector.  */

  condense_misc_bunches (0);

  /* Don't allow char * to have a typename (else would get caddr_t.)  */

  TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;

  /* Make a default for file to list.  */

  symfile = savestring (name, strlen (name));

  /* Call to select_source_symtab used to be here; it was using too
     much time.  I'll make sure that list_sources can handle the lack
     of current_source_symtab */

  do_cleanups (old_chain);	/* Descriptor closed here */

  /* Free the symtabs made by read_symsegs, but not their contents,
     which have been copied into symtabs on symtab_list.  */
  while (symseg_chain)
    {
      register struct symtab *s = symseg_chain->next;
      free (symseg_chain);
      symseg_chain = s;
    }

  if (!partial_symtab_list)
    printf ("\n(no debugging symbols found)...");

  printf ("done.\n");
  fflush (stdout);
}

/* Return name of file symbols were loaded from, or 0 if none..  */

char *
get_sym_file ()
{
  return symfile;
}

/* Buffer for reading the symbol table entries.  */
static struct nlist symbuf[4096];
static int symbuf_idx;
static int symbuf_end;

/* I/O descriptor for reading the symbol table.  */
static int symtab_input_desc;

/* The address of the string table
   of the object file we are reading (as copied into core).  */
static char *stringtab_global;

/* Refill the symbol table input buffer
   and set the variables that control fetching entries from it.
   Reports an error if no data available.
   This function can read past the end of the symbol table
   (into the string table) but this does no harm.  */

static int
fill_symbuf ()
{
  int nbytes = myread (symtab_input_desc, symbuf, sizeof (symbuf));
  if (nbytes <= 0)
    error ("error or end of file reading symbol table");
  symbuf_end = nbytes / sizeof (struct nlist);
  symbuf_idx = 0;
  return 1;
}

/* dbx allows the text of a symbol name to be continued into the
   next symbol name!  When such a continuation is encountered
   (a \ at the end of the text of a name)
   call this function to get the continuation.  */

static char *
next_symbol_text ()
{
  if (symbuf_idx == symbuf_end)
    fill_symbuf ();
  symnum++;
  return symbuf[symbuf_idx++].n_un.n_strx + stringtab_global;
}

/*
 * Initializes storage for all of the partial symbols that will be
 * created by read_dbx_symtab and subsidiaries.
 */
void
init_psymbol_list (total_symbols)
     int total_symbols;
{
  /* Current best guess is that there are approximately a twentieth
     of the total symbols (in a debugging file) are global or static
     oriented symbols */
  global_psymbols.size = total_symbols / 10;
  static_psymbols.size = total_symbols / 10;
  global_psymbols.next = global_psymbols.list = (struct partial_symbol *)
    xmalloc (global_psymbols.size * sizeof (struct partial_symbol));
  static_psymbols.next = static_psymbols.list = (struct partial_symbol *)
    xmalloc (static_psymbols.size * sizeof (struct partial_symbol));
}

/*
 * Initialize the list of bincls to contain none and have some
 * allocated.
 */
static void
init_bincl_list (number)
     int number;
{
  bincls_allocated = number;
  next_bincl = bincl_list = (struct header_file_location *)
      xmalloc (bincls_allocated * sizeof(struct header_file_location));
}

/*
 * Add a bincl to the list.
 */
static void
add_bincl_to_list (pst, name, instance)
     struct partial_symtab *pst;
     char *name;
     int instance;
{
  if (next_bincl >= bincl_list + bincls_allocated)
    {
      int offset = next_bincl - bincl_list;
      bincls_allocated *= 2;
      bincl_list = (struct header_file_location *)
	xrealloc (bincl_list,
		  bincls_allocated * sizeof (struct header_file_location));
      next_bincl = bincl_list + offset;
    }
  next_bincl->pst = pst;
  next_bincl->instance = instance;
  next_bincl++->name = name;
}

/*
 * Given a name, value pair, find the corresponding
 * bincl in the list.  Return the partial symtab associated
 * with that header_file_location.
 */
struct partial_symtab *
find_corresponding_bincl_psymtab (name, instance)
     char *name;
     int instance;
{
  struct header_file_location *bincl;

  for (bincl = bincl_list; bincl < next_bincl; bincl++)
    if (bincl->instance == instance
	&& !strcmp (name, bincl->name))
      return bincl->pst;

  return (struct partial_symtab *) 0;
}

/*
 * Free the storage allocated for the bincl list.
 */
static void
free_bincl_list ()
{
  free (bincl_list);
  bincls_allocated = 0;
}

static struct partial_symtab *start_psymtab ();
static void add_psymtab_dependency ();
static void end_psymtab();

static int
compare_psymbols (s1, s2)
     register struct partial_symbol *s1, *s2;
{
  register char
    *st1 = SYMBOL_NAME (s1),
    *st2 = SYMBOL_NAME (s2);
  register int i;

  if (st1[0] - st2[0])
    return (st1[0] - st2[0]);
  if (st1[1] - st2[1])
    return (st1[1] - st2[1]);
  if (i = strcmp(st1, st2))
    return (i);
  /* Next comparison implements policy that used to be in lookup_symbol:
   * it would search psymtabs in psymtab_list order (reverse order of
   * declaration) & take first occurance of symbol it found.  So, we
   * collate duplicate names in reverse psymtab order. */
  return (s2->pst - s1->pst);
}

/* Given pointers to an a.out symbol table in core containing dbx
   style data, setup partial_symtab's describing each source file for
   which debugging information is available.  NLISTLEN is the number
   of symbols in the symbol table.  All symbol names are given as
   offsets relative to STRINGTAB.  STRINGTAB_SIZE is the size of
   STRINGTAB.

   I have no idea whether or not this routine should be setup to deal
   with inclinks.  It seems reasonable to me that they be dealt with
   standardly, so I am not going to make a strong effort to deal with
   them here.
   */

static void
read_dbx_symtab (desc, stringtab, stringtab_size, nlistlen, inclink,
		 text_addr, text_size)
     int desc;
     register char *stringtab;
     register long stringtab_size;
     register int nlistlen;
     int inclink;
     unsigned text_addr;
     int text_size;
{
  register struct nlist *bufp;
  register char *namestring;
  register struct partial_symbol *psym;
  register struct psymbol_allocation_list *psymbol_struct;

  int nsl;
  int past_first_source_file = 0;
  CORE_ADDR last_o_file_start = 0;
  char *last_o_file_name = "*bogus*";
  struct cleanup *old_chain;
  char *p;
  enum namespace ns;
  enum address_class class;

#ifdef PROFILE_TYPES
  int i;
  int profile_types [256];
  int strcmp_called = 0;
  int autovars = 0;
  int global_funs = 0;
#endif

  /* Current partial symtab */
  struct partial_symtab *pst;

  /* List of current psymtab's include files */
  char **psymtab_include_list;
  int includes_allocated;
  int includes_used;

  /* Index within current psymtab dependency list */
  struct partial_symtab **dependency_list;
  int dependencies_used, dependencies_allocated;

#ifdef PROFILE_TYPES
  for (i = 0; i < 256; i++)
    profile_types[i] = 0;
#endif

  stringtab_global = stringtab;
  
  pst = (struct partial_symtab *) 0;

  includes_allocated = 30;
  includes_used = 0;
  psymtab_include_list = (char **) alloca (includes_allocated *
					   sizeof (char *));

  dependencies_allocated = 30;
  dependencies_used = 0;
  dependency_list =
    (struct partial_symtab **) alloca (dependencies_allocated *
				       sizeof (struct partial_symtab *));

  old_chain = make_cleanup (free_all_psymtabs, 0);

  /* Init bincl list */
  init_bincl_list (20);
  make_cleanup (free_bincl_list, 0);

  /* Setup global partial symbol list */
  init_psymbol_list (nlistlen);

  last_source_file = 0;

#ifdef END_OF_TEXT_DEFAULT
  end_of_text_addr = END_OF_TEXT_DEFAULT;
#else
  end_of_text_addr = text_addr + text_size;
#endif

  symtab_input_desc = desc;	/* This is needed for fill_symbuf below */
  symbuf_end = symbuf_idx = 0;

  for (symnum = 0; symnum < nlistlen; symnum++)
    {
      /* Get the symbol for this run and pull out some info */
      QUIT;	/* allow this to be interruptable */
      if (symbuf_idx == symbuf_end)
	fill_symbuf ();
      bufp = &symbuf[symbuf_idx++];

#ifdef PROFILE_TYPES
      profile_types[bufp->n_type]++;
#endif

      /*
       * Special case to speed up readin.
       */
      if (bufp->n_type == N_SLINE) continue;

      /* Ok.  There is a lot of code duplicated in the rest of this
         switch statiement (for efficiency reasons).  Since I don't
         like duplicating code, I will do my penance here, and
         describe the code which is duplicated:

	 *) The assignment to namestring.
	 *) The call to index.
	 *) The addition of a partial symbol the the two partial
	    symbol lists.  This last is a large section of code, so
	    I've imbedded it in the following macro.
	 */
      
/* Set namestring based on bufp.  */
#define SET_NAMESTRING()\
  if (bufp->n_un.n_strx < 0 || bufp->n_un.n_strx >= stringtab_size)  \
    error ("Invalid symbol data: bad string table offset: %d",       \
	   bufp->n_un.n_strx);                                       \
  namestring = bufp->n_un.n_strx + stringtab

#define	ADD_PSYMBOL_TO_LIST(NAME, NAMELENGTH, NAMESPACE, CLASS, LIST, VALUE)\
  do {		        						\
    if ((LIST).next >=							\
	(LIST).list + (LIST).size)					\
      {									\
	(LIST).list = (struct partial_symbol *)				\
	  xrealloc ((LIST).list,					\
		    ((LIST).size * 2					\
		     * sizeof (struct partial_symbol)));		\
	/* Next assumes we only went one over.  Should be good if	\
	   program works correctly */					\
	(LIST).next =							\
	  (LIST).list + (LIST).size;					\
	(LIST).size *= 2;						\
      }									\
    psym = (LIST).next++;						\
									\
    SYMBOL_NAME (psym) = (char *) obstack_alloc (psymbol_obstack,	\
						 (NAMELENGTH) + 1);	\
    strncpy (SYMBOL_NAME (psym), (NAME), (NAMELENGTH));			\
    SYMBOL_NAME (psym)[(NAMELENGTH)] = '\0';				\
    SYMBOL_NAMESPACE (psym) = (NAMESPACE);				\
    SYMBOL_CLASS (psym) = (CLASS);					\
    SYMBOL_VALUE (psym) = (VALUE); 					\
  } while (0);


      switch (bufp->n_type)
	{
	  /*
	   * Standard, non-debugger, symbols
	   */

	case N_TEXT | N_EXT:
	  /* Catch etext */

	  SET_NAMESTRING();

	  if (namestring[6] == '\0' && namestring[5] == 't'
	      && namestring[4] == 'x' && namestring[3] == 'e'
	      && namestring[2] == 't' && namestring[1] == 'e'
	      && namestring[0] == '_')
	    end_of_text_addr = bufp->n_value;

	  /* Figure out beginning and end of global linker symbol
	     section and put non-debugger specified symbols on
	     tmp_symchain */

	  last_global_sym = symnum;
	  if (!first_global_sym) first_global_sym = symnum;

	  record_misc_function (namestring, bufp->n_value,
				bufp->n_type); /* Always */

	  continue;

#ifdef N_NBTEXT
	case N_NBTEXT | N_EXT:
#endif
#ifdef N_NBDATA
	case N_NBDATA | N_EXT:
#endif
#ifdef N_NBBSS
	case N_NBBSS | N_EXT:
#endif
#ifdef N_SETV
	case N_SETV | N_EXT:
#endif
	case N_ABS | N_EXT:
	case N_DATA | N_EXT:
	case N_BSS | N_EXT:
	  /* Figure out beginning and end of global linker symbol
	     section and put non-debugger specified symbols on
	     tmp_symchain */

	  SET_NAMESTRING();

	  last_global_sym = symnum;
	  if (!first_global_sym) first_global_sym = symnum;

	  /* Not really a function here, but... */
	  record_misc_function (namestring, bufp->n_value,
				bufp->n_type); /* Always */

	  continue;

#ifdef N_NBTEXT
	case N_NBTEXT:
#endif

	  /* We need to be able to deal with both N_FN or N_TEXT,
	     because we have no way of knowing whether the sys-supplied ld
	     or GNU ld was used to make the executable.  */
#if ! (N_FN & N_EXT)
	case N_FN:
#endif
	case N_FN | N_EXT:
	case N_TEXT:
	  SET_NAMESTRING();
	  if ((namestring[0] == '-' && namestring[1] == 'l')
	      || (namestring [(nsl = strlen (namestring)) - 1] == 'o'
		  && namestring [nsl - 2] == '.'))
	    {
	      if (entry_point < bufp->n_value
		  && entry_point >= last_o_file_start)
		{
		  startup_file_start = last_o_file_start;
		  startup_file_end = bufp->n_value;
		}
	      if (past_first_source_file && pst)
		{
		  end_psymtab (pst, psymtab_include_list, includes_used,
			       symnum * sizeof (struct nlist), bufp->n_value,
			       dependency_list, dependencies_used,
			       global_psymbols.next, static_psymbols.next);
		  pst = (struct partial_symtab *) 0;
		  includes_used = 0;
		  dependencies_used = 0;
		}
	      else
		past_first_source_file = 1;
	      last_o_file_start = bufp->n_value;
	      last_o_file_name = namestring;
	      nsl = strlen(namestring);
	      if (namestring[nsl-2] == '.' && namestring[nsl-1] == 'o')
		namestring[nsl-2] = 0;
	    }
	  else if (strcmp(namestring, "gcc_compiled."))
	    {
	      if (*namestring == '_')
		++namestring;
	      namestring = obconcat(last_o_file_name, ":", namestring);
	      last_global_sym = symnum;
	      if (!first_global_sym)
		first_global_sym = symnum;
	      record_misc_function(namestring, bufp->n_value, bufp->n_type);
	    }
	  continue;

	case N_ABS:
	case N_DATA:
	case N_BSS:
	    SET_NAMESTRING();
	    if (*namestring == '_')
	      ++namestring;
	    namestring = obconcat(last_o_file_name, ":", namestring);
	    last_global_sym = symnum;
	    if (!first_global_sym)
	      first_global_sym = symnum;
	    record_misc_function(namestring, bufp->n_value, bufp->n_type);
	    continue;

	case N_UNDF:
	case N_UNDF | N_EXT:
#ifdef N_NBDATA
	case N_NBDATA:
#endif
#ifdef N_NBBSS
	case N_NBBSS:
#endif

	  /* Keep going . . .*/

	  /*
	   * Special symbol types for GNU
	   */
#ifdef N_INDR
	case N_INDR:
	case N_INDR | N_EXT:
#endif
#ifdef N_SETA
	case N_SETA:
	case N_SETA | N_EXT:
	case N_SETT:
	case N_SETT | N_EXT:
	case N_SETD:
	case N_SETD | N_EXT:
	case N_SETB:
	case N_SETB | N_EXT:
	case N_SETV:
#endif
	  continue;

	  /*
	   * Debugger symbols
	   */

	case N_SO:
	  /* End the current partial symtab and start a new one */

	  SET_NAMESTRING();

	  if (pst && past_first_source_file)
	    {
	      end_psymtab (pst, psymtab_include_list, includes_used,
			   symnum * sizeof (struct nlist), bufp->n_value,
			   dependency_list, dependencies_used,
			   global_psymbols.next, static_psymbols.next);
	      pst = (struct partial_symtab *) 0;
	      includes_used = 0;
	      dependencies_used = 0;
	    }
	  else
	    past_first_source_file = 1;

	  pst = start_psymtab (namestring, bufp->n_value,
			       symnum * sizeof (struct nlist),
			       global_psymbols.next, static_psymbols.next);

	  continue;

#ifdef N_BINCL
	case N_BINCL:
	  /* Add this bincl to the bincl_list for future EXCLs.  No
	     need to save the string; it'll be around until
	     read_dbx_symtab function return */

	  SET_NAMESTRING();

	  add_bincl_to_list (pst, namestring, bufp->n_value);

	  /* Mark down an include file in the current psymtab */

	  psymtab_include_list[includes_used++] = namestring;
	  if (includes_used >= includes_allocated)
	    {
	      char **orig = psymtab_include_list;

	      psymtab_include_list = (char **)
		alloca ((includes_allocated *= 2) *
			sizeof (char *));
	      bcopy (orig, psymtab_include_list,
		     includes_used * sizeof (char *));
	    }

	  continue;
#endif

	case N_SOL:
	  /* Mark down an include file in the current psymtab */

	  SET_NAMESTRING();

	  /* In C++, one may expect the same filename to come round many
	     times, when code is coming alternately from the main file
	     and from inline functions in other files. So I check to see
	     if this is a file we've seen before.

	     This seems to be a lot of time to be spending on N_SOL, but
	     things like "break expread.y:435" need to work (I
	     suppose the psymtab_include_list could be hashed or put
	     in a binary tree, if profiling shows this is a major hog).  */
	  {
	    register int i;
	    for (i = 0; i < includes_used; i++)
	      if (!strcmp (namestring, psymtab_include_list[i]))
		{
		  i = -1; 
		  break;
		}
	    if (i == -1)
	      continue;
	  }

	  psymtab_include_list[includes_used++] = namestring;
	  if (includes_used >= includes_allocated)
	    {
	      char **orig = psymtab_include_list;

	      psymtab_include_list = (char **)
		alloca ((includes_allocated *= 2) *
			sizeof (char *));
	      bcopy (orig, psymtab_include_list,
		     includes_used * sizeof (char *));
	    }
	  continue;

	case N_LSYM:		/* Typedef or automatic variable. */
	  SET_NAMESTRING();

	  p = (char *) index (namestring, ':');

	  /* Skip if there is no :.  */
	  if (!p) continue;

	  switch (p[1])
	    {
	    case 'T':
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   STRUCT_NAMESPACE, LOC_TYPEDEF,
				   static_psymbols, bufp->n_value);
	      goto check_enum;
	    case 't':
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   VAR_NAMESPACE, LOC_TYPEDEF,
				   static_psymbols, bufp->n_value);
	    check_enum:
	      /* If this is an enumerated type, we need to
		 add all the enum constants to the partial symbol
		 table.  This does not cover enums without names, e.g.
		 "enum {a, b} c;" in C, but fortunately those are
		 rare.  There is no way for GDB to find those from the
		 enum type without spending too much time on it.  Thus
		 to solve this problem, the compiler needs to put out separate
		 constant symbols ('c' N_LSYMS) for enum constants in
		 enums without names.  */

	      /* We are looking for something of the form
		 <name> ":" ("t" | "T") [<number> "="] "e"
		 {<constant> ":" <value> ","} ";".  */

	      /* Skip over the colon and the 't' or 'T'.  */
	      p += 2;
	      /* This type may be given a number.  Skip over it.  */
	      while ((*p >= '0' && *p <= '9')
		     || *p == '=')
		p++;

	      if (*p++ == 'e')
		{
		  /* We have found an enumerated type.  */
		  /* According to comments in read_enum_type
		     a comma could end it instead of a semicolon.
		     I don't know where that happens.
		     Accept either.  */
		  while (*p && *p != ';' && *p != ',')
		    {
		      char *q;

		      /* Check for and handle cretinous dbx symbol name
			 continuation!  */
		      if (*p == '\\')
			p = next_symbol_text ();

		      /* Point to the character after the name
			 of the enum constant.  */
		      for (q = p; *q && *q != ':'; q++)
			;
		      /* Note that the value doesn't matter for
			 enum constants in psymtabs, just in symtabs.  */
		      ADD_PSYMBOL_TO_LIST (p, q - p,
					   VAR_NAMESPACE, LOC_CONST,
					   static_psymbols, 0);
		      /* Point past the name.  */
		      p = q;
		      /* Skip over the value.  */
		      while (*p && *p != ',')
			p++;
		      /* Advance past the comma.  */
		      if (*p)
			p++;
		    }
		}

	      continue;
	    case 'c':
	      /* Constant, e.g. from "const" in Pascal.  */
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   VAR_NAMESPACE, LOC_CONST,
				   static_psymbols, bufp->n_value);
	      continue;
	    default:
#ifdef PROFILE_TYPES
	      if (isalpha(p[1]))
		  printf ("Funny...LSYM with a letter that isn't a type\n");
	      autovars++;
#endif
	      /* Skip if the thing following the : is
	         not a letter (which indicates declaration of a local
	         variable, which we aren't interested in).  */
	      continue;
	    }

	case N_FUN:
#if 0
	  /* This special-casing of N_FUN is just wrong; N_FUN
	     does not mean "function"; it means "text segment".
	     So N_FUN can go with 'V', etc. as well as 'f' or 'F'.  */

	  SET_NAMESTRING();

	  p = (char *) index (namestring, ':');

	  if (!p || p[1] == 'F') continue;

#ifdef PROFILE_TYPES
	  if (p[1] != 'f')
	    printf ("Funny...FUN with a letter that isn't 'F' or 'f'.\n");
	  global_funs++;
#endif

	  ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
			       VAR_NAMESPACE, LOC_BLOCK,
			       static_psymbols, bufp->n_value);

	  continue;
#endif /* 0 */
	case N_GSYM:		/* Global (extern) variable; can be
				   data or bss (sigh).  */
	case N_STSYM:		/* Data seg var -- static  */
	case N_LCSYM:		/* BSS      "  */

	/* Following may probably be ignored; I'll leave them here
	   for now (until I do Pascal and Modula 2 extensions).  */

	case N_PC:		/* I may or may not need this; I
				   suspect not.  */
#ifdef N_M2C
	case N_M2C:		/* I suspect that I can ignore this here. */
	case N_SCOPE:		/* Same.   */
#endif

	  SET_NAMESTRING();

	  p = (char *) index (namestring, ':');
	  if (!p)
	    continue;		/* Not a debugging symbol.   */

	  process_symbol_for_psymtab:

	  /* Main processing section for debugging symbols which
	     the initial read through the symbol tables needs to worry
	     about.  If we reach this point, the symbol which we are
	     considering is definitely one we are interested in.
	     p must also contain the (valid) index into the namestring
	     which indicates the debugging type symbol.  */

	  switch (p[1])
	    {
	    case 'c':
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   VAR_NAMESPACE, LOC_CONST,
				   static_psymbols, bufp->n_value);
	      continue;
	    case 'S':
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   VAR_NAMESPACE, LOC_STATIC,
				   static_psymbols, bufp->n_value);
	      continue;
	    case 'G':
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   VAR_NAMESPACE, LOC_EXTERNAL,
				   global_psymbols, bufp->n_value);
	      continue;

	    case 't':
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   VAR_NAMESPACE, LOC_TYPEDEF,
				   global_psymbols, bufp->n_value);
	      continue;

	    case 'f':
	      ADD_PSYMBOL_TO_LIST (namestring, p - namestring,
				   VAR_NAMESPACE, LOC_BLOCK,
				   static_psymbols, bufp->n_value);
	      continue;

	      /* Two things show up here (hopefully); static symbols of
		 local scope (static used inside braces) or extensions
		 of structure symbols.  We can ignore both.  */
	    case 'V':
	    case '(':
	    case '0':
	    case '1':
	    case '2':
	    case '3':
	    case '4':
	    case '5':
	    case '6':
	    case '7':
	    case '8':
	    case '9':
	      /* Global functions are ignored here.  I'm not
		 sure what psymtab they go into (or just the misc
		 function vector).  */
	    case 'F':
	      continue;

	    default:
	      fatal ("Internal error: Unexpected debugging symbol type '%c' at symnum %d.\n",
		     p[1], symnum);
	    }

#ifdef N_BINCL
	case N_EXCL:

	  SET_NAMESTRING();

	  /* Find the corresponding bincl and mark that psymtab on the
	     psymtab dependency list */
	  {
	    struct partial_symtab *needed_pst =
	      find_corresponding_bincl_psymtab (namestring, bufp->n_value);

	    /* If this include file was defined earlier in this file,
	       leave it alone.  */
	    if (needed_pst == pst) continue;

	    if (needed_pst)
	      {
		int i;
		int found = 0;

		for (i = 0; i < dependencies_used; i++)
		  if (dependency_list[i] == needed_pst)
		    {
		      found = 1;
		      break;
		    }

		/* If it's already in the list, skip the rest.  */
		if (found) continue;

		dependency_list[dependencies_used++] = needed_pst;
		if (dependencies_used >= dependencies_allocated)
		  {
		    struct partial_symtab **orig = dependency_list;
		    dependency_list =
		      (struct partial_symtab **)
			alloca ((dependencies_allocated *= 2)
				* sizeof (struct partial_symtab *));
		    bcopy (orig, dependency_list,
			   (dependencies_used
			    * sizeof (struct partial_symtab *)));
#ifdef DEBUG_INFO
		    fprintf (stderr, "Had to reallocate dependency list.\n");
		    fprintf (stderr, "New dependencies allocated: %d\n",
			     dependencies_allocated);
#endif
		  }
	      }
	    else
	      error ("Invalid symbol data: \"repeated\" header file not previously seen, at symtab pos %d.",
		     symnum);
	  }
	  continue;

	case N_EINCL:
#endif
#ifdef N_DSLINE
	case N_DSLINE:
#endif
#ifdef N_BSLINE
	case N_BSLINE:
#endif
	case N_SSYM:		/* Claim: Structure or union element.
				   Hopefully, I can ignore this.  */
	case N_ENTRY:		/* Alternate entry point; can ignore. */
#ifdef N_MAIN
	case N_MAIN:		/* Can definitely ignore this.   */
#endif
	case N_LENG:
	case N_BCOMM:
	case N_ECOMM:
	case N_ECOML:
	case N_FNAME:
	case N_SLINE:
	case N_RSYM:
	case N_PSYM:
	case N_LBRAC:
	case N_RBRAC:
	  /* These symbols aren't interesting; don't worry about them */

	  continue;

	default:
	  /* If we haven't found it yet, we've got problems */

	  if (IGNORE_SYMBOL (bufp->n_type))
	    continue;

	  fatal ("Bad symbol type 0x%x encountered in gdb scan", bufp->n_type);
	}
    }

  /* If there's stuff to be cleaned up, clean it up.  */
  if (entry_point < bufp->n_value
      && entry_point >= last_o_file_start)
    {
      startup_file_start = last_o_file_start;
      startup_file_end = bufp->n_value;
    }

  if (pst)
    {
      end_psymtab (pst, psymtab_include_list, includes_used,
		   symnum * sizeof (struct nlist), end_of_text_addr,
		   dependency_list, dependencies_used,
		   global_psymbols.next, static_psymbols.next);
      includes_used = 0;
      dependencies_used = 0;
      pst = (struct partial_symtab *) 0;
    }

  /* sort the global & static symtab list so we can binary search them */
  qsort (global_psymbols.list, global_psymbols.next - global_psymbols.list,
	 sizeof (struct partial_symbol), compare_psymbols);
  qsort (static_psymbols.list, static_psymbols.next - static_psymbols.list,
	 sizeof (struct partial_symbol), compare_psymbols);
  free_bincl_list ();
  discard_cleanups (old_chain);
#ifdef PROFILE_TYPES
  {
    int i, j;
#define __define_stab(SYM, NUMBER, NAME)	{NUMBER, NAME},
  static struct xyzzy {
    unsigned char symnum;
    char *name;
  } tmp_list[] = {
#include "stab.def"
    {0x1, "eREF"},
    {0x2, "ABS"},
    {0x3, "eABS"},
    {0x4, "TEXT"},
    {0x5, "eTEXT"},
    {0x6, "DATA"},
    {0x7, "eDATA"},
    {0x8, "BSS"},
    {0x9, "eBSS"},
    {0x12, "COMM"},
    {0x13, "eCOMM"},
    {0x1f, "FN"},
    {0, "Unknown"},
};
    for (i = 0; i < 256; i++)
      {
	for (j = 0; j < (sizeof (tmp_list) / sizeof (struct xyzzy)) - 1; j++)
	  if (tmp_list[j].symnum == i)
	    break;
	printf ("Symbol \"%s\" (0x%x) occured %d times.\n",
		tmp_list[j].name, i, profile_types[i]);
      }
    printf ("Auto vars (under LSYM): %d\n", autovars);
    printf ("Global funs (under FUN): %d\n", global_funs);
  }
#endif
}

/*
 * Allocate and partially fill a partial symtab.  It will be
 * completely filled at the end of the symbol list.
 */
static struct partial_symtab *
start_psymtab (filename, textlow, ldsymoff, global_syms, static_syms)
     char *filename;
     int textlow;
     int ldsymoff;
     struct partial_symbol *global_syms;
     struct partial_symbol *static_syms;
{
  struct partial_symtab *result =
    (struct partial_symtab *) obstack_alloc (psymbol_obstack,
					     sizeof (struct partial_symtab));

  result->filename =
    (char *) obstack_alloc (psymbol_obstack,
			    strlen (filename) + 1);
  strcpy (result->filename, filename);

  result->textlow = textlow;
  result->ldsymoff = ldsymoff;

  result->readin = 0;

  result->globals_offset = global_syms - global_psymbols.list;
  result->statics_offset = static_syms - static_psymbols.list;

  result->n_global_syms = 0;
  result->n_static_syms = 0;

  return result;
}


/* Close off the current usage of a partial_symbol table entry.  This
   involves setting the correct number of includes (with a realloc),
   setting the high text mark, setting the symbol length in the
   executable, and setting the length of the global and static lists
   of psymbols.

   The global symbols and static symbols are then seperately sorted.

   Then the partial symtab is put on the global list.
   *** List variables and peculiarities of same. ***
   */
static void
end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
	     capping_text, dependency_list, number_dependencies,
	     capping_global, capping_static)
     struct partial_symtab *pst;
     char **include_list;
     int num_includes;
     int capping_symbol_offset;
     int capping_text;
     struct partial_symtab **dependency_list;
     int number_dependencies;
     struct partial_symbol *capping_global, *capping_static;
{
  int i;
  register struct partial_symbol *ps;

  pst->ldsymlen = capping_symbol_offset - pst->ldsymoff;
  pst->texthigh = capping_text;

  pst->n_global_syms =
    capping_global - (global_psymbols.list + pst->globals_offset);
  pst->n_static_syms =
    capping_static - (static_psymbols.list + pst->statics_offset);

  pst->dependencies = (struct partial_symtab **)
    obstack_alloc (psymbol_obstack,
		   number_dependencies * sizeof (struct partial_symtab *));
  bcopy (dependency_list, pst->dependencies,
	 number_dependencies * sizeof (struct partial_symtab *));
  pst->number_of_dependencies = number_dependencies;

  for (i = 0; i < num_includes; i++)
    {
      /* Eventually, put this on obstack */
      struct partial_symtab *subpst =
	(struct partial_symtab *)
	  obstack_alloc (psymbol_obstack,
			 sizeof (struct partial_symtab));

      subpst->filename =
	(char *) obstack_alloc (psymbol_obstack,
				strlen (include_list[i]) + 1);
      strcpy (subpst->filename, include_list[i]);

      subpst->ldsymoff =
	subpst->ldsymlen =
	  subpst->textlow =
	    subpst->texthigh = 0;
      subpst->readin = 0;

      subpst->dependencies = (struct partial_symtab **)
	obstack_alloc (psymbol_obstack,
		       sizeof (struct partial_symtab *));
      subpst->dependencies[0] = pst;
      subpst->number_of_dependencies = 1;

      subpst->globals_offset =
	subpst->n_global_syms =
	  subpst->statics_offset =
	    subpst->n_static_syms = 0;

      subpst->next = partial_symtab_list;
      partial_symtab_list = subpst;
    }

  for (ps = global_psymbols.list + pst->globals_offset;
       ps < capping_global; ++ps)
    ps->pst = pst;
  for (ps = static_psymbols.list + pst->statics_offset;
       ps < capping_static; ++ps)
    ps->pst = pst;

  /* Put the psymtab on the psymtab list */
  pst->next = partial_symtab_list;
  partial_symtab_list = pst;
}


/* Helper routines for psymtab_to_symtab.  */
static void scan_file_globals ();
static void read_ofile_symtab ();

static void
psymtab_to_symtab_1 (pst, desc, stringtab, stringtab_size, sym_offset)
     struct partial_symtab *pst;
     int desc;
     char *stringtab;
     int stringtab_size;
     int sym_offset;
{
  struct cleanup *old_chain;
  int i;
  
  if (!pst)
    return;

  if (pst->readin)
    {
      fprintf (stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
	       pst->filename);
      return;
    }

  /* Read in all partial symbtabs on which this one is dependent */
  for (i = 0; i < pst->number_of_dependencies; i++)
    if (!pst->dependencies[i]->readin)
      {
	/* Inform about additional files that need to be read in.  */
	if (info_verbose)
	  {
	    printf_filtered (" and %s...", pst->dependencies[i]->filename);
	    fflush (stdout);
	  }
	psymtab_to_symtab_1 (pst->dependencies[i], desc,
			     stringtab, stringtab_size, sym_offset);
      }

  if (pst->ldsymlen)		/* Otherwise it's a dummy */
    {
      /* Init stuff necessary for reading in symbols */
      free_pendings = 0;
      pending_blocks = 0;
      file_symbols = 0;
      global_symbols = 0;
      old_chain = make_cleanup (really_free_pendings, 0);

      /* Read in this files symbols */
      lseek (desc, sym_offset, L_SET);
      read_ofile_symtab (desc, stringtab, stringtab_size,
			 pst->ldsymoff,
			 pst->ldsymlen, pst->textlow,
			 pst->texthigh - pst->textlow, 0);
      sort_symtab_syms (symtab_list); /* At beginning since just added */

      do_cleanups (old_chain);
    }

  pst->readin = 1;
}

/*
 * Read in all of the symbols for a given psymtab for real.  Return
 * the value of the symtab you create.  Do not free the storage
 * allocated to the psymtab; it may have pointers to it.
 */
struct symtab *
psymtab_to_symtab(pst)
     struct partial_symtab *pst;
{
  int desc;
  DECLARE_FILE_HEADERS;
  char *stringtab;
  struct partial_symtab **list_patch;
  int stsize, val;
  struct stat statbuf;
  struct cleanup *old_chain;
  extern void close ();
  int i;
  struct symtab *result;
  char *name = symfile;		/* Some of the macros require the */
				/* variable "name" to be defined in */
				/* the context in which they execute */
				/* (Yech!)  */

  if (!pst)
    return 0;

  if (pst->readin)
    {
      fprintf (stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
	       pst->filename);
      return 0;
    }

  if (!name)
    error("No symbol file currently specified; use command symbol-file");

  if (pst->ldsymlen || pst->number_of_dependencies)
    {
      /* Print the message now, before reading the string table,
	 to avoid disconcerting pauses.  */
      if (info_verbose)
	{
	  printf_filtered ("Reading in symbols for %s...", pst->filename);
	  fflush (stdout);
	}

      /* Open symbol file and read in string table */
      if (stat (name, &statbuf) < 0)
	perror_with_name (name);
      desc = open(name, O_RDONLY, 0); /* symbol_file_command
					 guarrantees that the symbol file name
					 will be absolute, so there is no
					 need for openp */

      old_chain = make_cleanup (close, desc);

      if (desc < 0)
	error("Symbol file not readable");

      READ_FILE_HEADERS (desc, name);

#if 0
      /* Read in the string table */
      lseek (desc, STRING_TABLE_OFFSET, L_SET);
      READ_STRING_TABLE_SIZE (stsize);
      if (stsize >= 0 && stsize < statbuf.st_size)
	{
#ifdef BROKEN_LARGE_ALLOCA
	  stringtab = (char *) xmalloc (stsize);
	  make_cleanup (free, stringtab);
#else
	  stringtab = (char *) alloca (stsize);
#endif
	}
      else
	stringtab = NULL;
      if (stringtab == NULL)
	error ("ridiculous string table size: %d bytes", stsize);

      /* Usually READ_STRING_TABLE_SIZE will have shifted the file pointer.
	 Occaisionally, it won't.  */
      val = lseek (desc, STRING_TABLE_OFFSET, L_SET);
      if (val < 0)
	perror_with_name (name);
      val = myread (desc, stringtab, stsize);
      if (val < 0)
	perror_with_name (name);
#endif /* 0 */
      stringtab = symfile_string_table;
      stsize = symfile_string_table_size;

      psymtab_to_symtab_1 (pst, desc, stringtab, stsize,
			   SYMBOL_TABLE_OFFSET);

      /* Match with global symbols.  This  only needs to be done once,
         after all of the symtabs and dependencies have been read in.   */
      scan_file_globals ();

      do_cleanups (old_chain);

      /* Finish up the debug error message.  */
      if (info_verbose)
	printf_filtered ("done.\n");
    }

  /* Search through list for correct name. */
  for (result = symtab_list; result; result = result->next)
    if (!strcmp (result->filename, pst->filename))
      return result;

  return 0;
}

/*
 * Scan through all of the global symbols defined in the object file,
 * assigning values to the debugging symbols that need to be assigned
 * to.  Get these symbols from the misc function list.
 */
static void
scan_file_globals ()
{
  int hash;
  int mf;

  for (mf = 0; mf < misc_function_count; mf++)
    {
      char *namestring = misc_function_vector[mf].name;
      struct symbol *sym, *prev;

      QUIT;

      prev = (struct symbol *) 0;

      /* Get the hash index and check all the symbols
	 under that hash index. */

      hash = hashname (namestring);

      for (sym = global_sym_chain[hash]; sym;)
	{
	  if (*namestring == SYMBOL_NAME (sym)[0]
	      && !strcmp(namestring + 1, SYMBOL_NAME (sym) + 1))
	    {
	      /* Splice this symbol out of the hash chain and
		 assign the value we have to it. */
	      if (prev)
		SYMBOL_VALUE (prev) = SYMBOL_VALUE (sym);
	      else
		global_sym_chain[hash]
		  = (struct symbol *) SYMBOL_VALUE (sym);
	      
	      /* Check to see whether we need to fix up a common block.  */
	      /* Note: this code might be executed several times for
		 the same symbol if there are multiple references.  */
	      if (SYMBOL_CLASS (sym) == LOC_BLOCK)
		fix_common_block (sym, misc_function_vector[mf].address);
	      else
		SYMBOL_VALUE (sym) = misc_function_vector[mf].address;
	      
	      if (prev)
		sym = (struct symbol *) SYMBOL_VALUE (prev);
	      else
		sym = global_sym_chain[hash];
	    }
	  else
	    {
	      prev = sym;
	      sym = (struct symbol *) SYMBOL_VALUE (sym);
	    }
	}
    }
}

/*
 * Read in a defined section of a specific object file's symbols.
 *
 * DESC is the file descriptor for the file, positioned at the
 * beginning of the symtab
 * STRINGTAB is a pointer to the files string
 * table, already read in
 * SYM_OFFSET is the offset within the file of
 * the beginning of the symbols we want to read, NUM_SUMBOLS is the
 * number of symbols to read
 * TEXT_OFFSET is the offset to be added to
 * all values of symbols coming in and
 * TEXT_SIZE is the size of the text segment read in.
 * OFFSET is a flag which indicates that the value of all of the
 * symbols should be offset by TEXT_OFFSET (for the purposes of
 * incremental linking).
 */

static void
read_ofile_symtab (desc, stringtab, stringtab_size, sym_offset,
		   sym_size, text_offset, text_size, offset)
     int desc;
     register char *stringtab;
     int sym_offset;
     int sym_size;
     int text_offset;
     int text_size;
     int offset;
{
  register char *namestring;
  register struct symbol *sym, *prev;
  int hash;
  struct cleanup *old_chain;
  struct nlist *bufp;
  unsigned char type;
#ifdef N_BINCL
  subfile_stack = 0;
#endif

  stringtab_global = stringtab;
  last_source_file = 0;

  symtab_input_desc = desc;
  symbuf_end = symbuf_idx = 0;

  /* It is necessary to actually read one symbol *before* the start
     of this symtab's symbols, because the GCC_COMPILED_FLAG_SYMBOL
     occurs before the N_SO symbol.

     Detecting this in read_dbx_symtab
     would slow down initial readin, so we look for it here instead.  */
  if (sym_offset >= sizeof (struct nlist))
    {
      lseek (desc, sym_offset - sizeof (struct nlist), L_INCR);
      fill_symbuf ();
      bufp = &symbuf[symbuf_idx++];

      if (bufp->n_un.n_strx < 0 || bufp->n_un.n_strx >= stringtab_size)
	error ("Invalid symbol data: bad string table offset: %d",
	       bufp->n_un.n_strx);
      namestring = bufp->n_un.n_strx + stringtab;

      processing_gcc_compilation =
	(bufp->n_type == N_TEXT
	 && !strcmp (namestring, GCC_COMPILED_FLAG_SYMBOL));
    }
  else
    {
      /* The N_SO starting this symtab is the first symbol, so we
	 better not check the symbol before it.  I'm not this can
	 happen, but it doesn't hurt to check for it.  */
      lseek(desc, sym_offset, L_INCR);
      processing_gcc_compilation = 0;
    }

  if (symbuf_idx == symbuf_end)
    fill_symbuf();
  bufp = &symbuf[symbuf_idx];
  if ((unsigned char) bufp->n_type != N_SO)
    fatal("First symbol in segment of executable not a source symbol");

  for (symnum = 0;
       symnum < sym_size / sizeof(struct nlist);
       symnum++)
    {
      QUIT;			/* Allow this to be interruptable */
      if (symbuf_idx == symbuf_end)
	fill_symbuf();
      bufp = &symbuf[symbuf_idx++];
      type = bufp->n_type;

      if (offset &&
	  (type == N_TEXT || type == N_DATA || type == N_BSS))
	bufp->n_value += text_offset;

      if (bufp->n_un.n_strx < 0 || bufp->n_un.n_strx >= stringtab_size)
	error ("Invalid symbol data: bad string table offset: %d",
	       bufp->n_un.n_strx);
      namestring = bufp->n_un.n_strx + stringtab;

      if (type & N_STAB)
	process_one_symbol(type, bufp->n_desc,
			   bufp->n_value, namestring);
      /* We skip checking for a new .o or -l file; that should never
         happen in this routine. */
      else if (type == N_TEXT
	       && !strcmp (namestring, GCC_COMPILED_FLAG_SYMBOL))
	/* I don't think this code will ever be executed, because
	   the GCC_COMPILED_FLAG_SYMBOL usually is right before
	   the N_SO symbol which starts this source file.
	   However, there is no reason not to accept
	   the GCC_COMPILED_FLAG_SYMBOL anywhere.  */
	processing_gcc_compilation = 1;
      else if (type & N_EXT || type == N_TEXT
#ifdef N_NBTEXT
	       || type == N_NBTEXT
#endif
	       )
	  /* Global symbol: see if we came across a dbx defintion for
	     a corresponding symbol.  If so, store the value.  Remove
	     syms from the chain when their values are stored, but
	     search the whole chain, as there may be several syms from
	     different files with the same name. */
	  /* This is probably not true.  Since the files will be read
	     in one at a time, each reference to a global symbol will
	     be satisfied in each file as it appears. So we skip this
	     section. */
	&stringtab_global;	/* For debugger; am I right? */
    }
  end_symtab (text_offset + text_size);
}

static int
hashname (name)
     char *name;
{
  register char *p = name;
  register int total = p[0];
  register int c;

  c = p[1];
  total += c << 2;
  if (c)
    {
      c = p[2];
      total += c << 4;
      if (c)
	total += p[3] << 6;
    }

  /* Ensure result is positive.  */
  if (total < 0) total += (1000 << 6);
  return total % HASHSIZE;
}

/* Put all appropriate global symbols in the symseg data
   onto the hash chains so that their addresses will be stored
   when seen later in loader global symbols.  */

static void
hash_symsegs ()
{
  /* Look at each symbol in each block in each symseg symtab.  */
  struct symtab *s;
  for (s = symseg_chain; s; s = s->next)
    {
      register int n;
      for (n = BLOCKVECTOR_NBLOCKS (BLOCKVECTOR (s)) - 1; n >= 0; n--)
	{
	  register struct block *b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), n);
	  register int i;
	  for (i = BLOCK_NSYMS (b) - 1; i >= 0; i--)
	    {
	      register struct symbol *sym = BLOCK_SYM (b, i);

	      /* Put the symbol on a chain if its value is an address
		 that is figured out by the loader.  */

	      if (SYMBOL_CLASS (sym) == LOC_EXTERNAL)
		{
		  register int hash = hashname (SYMBOL_NAME (sym));
		  SYMBOL_VALUE (sym) = (int) global_sym_chain[hash];
		  global_sym_chain[hash] = sym;
		  SYMBOL_CLASS (sym) = LOC_STATIC;
		}
	    }
	}
    }
}

static void
process_one_symbol (type, desc, value, name)
     int type, desc;
     CORE_ADDR value;
     char *name;
{
  register struct context_stack *new;
  char *colon_pos;

  /* Something is wrong if we see real data before
     seeing a source file name.  */

  if (last_source_file == 0 && type != N_SO)
    {
      /* Currently this ignores N_ENTRY on Gould machines, N_NSYM on machines
	 where that code is defined.  */
      if (IGNORE_SYMBOL (type))
	return;

      error ("Invalid symbol data: does not start by identifying a source file.");
    }

  switch (type)
    {
    case N_FUN:
    case N_FNAME:
      /* Either of these types of symbols indicates the start of
	 a new function.  We must process its "name" normally for dbx,
	 but also record the start of a new lexical context, and possibly
	 also the end of the lexical context for the previous function.  */
      /* This is not always true.  This type of symbol may indicate a
         text segment variable.  */

      colon_pos = index (name, ':');
      if (!colon_pos++
	  || (*colon_pos != 'f' && *colon_pos != 'F'))
	{
	  define_symbol (value, name, desc);
	  break;
	}

      within_function = 1;
      if (context_stack_depth > 0)
	{
	  new = &context_stack[--context_stack_depth];
	  /* Make a block for the local symbols within.  */
	  finish_block (new->name, &local_symbols, new->old_blocks,
			new->start_addr, value);
	}
      /* Stack must be empty now.  */
      if (context_stack_depth != 0)
	error ("Invalid symbol data: unmatched N_LBRAC before symtab pos %d.",
	       symnum);

      new = &context_stack[context_stack_depth++];
      new->old_blocks = pending_blocks;
      new->start_addr = value;
      new->name = define_symbol (value, name, desc);
      local_symbols = 0;
      break;

    case N_LBRAC:
      /* This "symbol" just indicates the start of an inner lexical
	 context within a function.  */

      if (context_stack_depth == context_stack_size)
	{
	  context_stack_size *= 2;
	  context_stack = (struct context_stack *)
	    xrealloc (context_stack,
		      (context_stack_size
		       * sizeof (struct context_stack)));
	}

      new = &context_stack[context_stack_depth++];
      new->depth = desc;
      new->locals = local_symbols;
      new->old_blocks = pending_blocks;
      new->start_addr = value;
      new->name = 0;
      local_symbols = 0;
      break;

    case N_RBRAC:
      /* This "symbol" just indicates the end of an inner lexical
	 context that was started with N_LBRAC.  */
      new = &context_stack[--context_stack_depth];
      if (desc != new->depth)
	error ("Invalid symbol data: N_LBRAC/N_RBRAC symbol mismatch, symtab pos %d.", symnum);

      /* Some native compilers put the variable decls inside of an
         LBRAC/RBRAC block.  This macro should be nonzero if this
	 is true.  DESC is N_DESC from the N_RBRAC symbol.  */
#if !defined (VARIABLES_INSIDE_BLOCK)
#define VARIABLES_INSIDE_BLOCK(desc) 0
#endif

      /* Can only use new->locals as local symbols here if we're in
         gcc or on a machine that puts them before the lbrack.  */
      if (!VARIABLES_INSIDE_BLOCK(desc))
	local_symbols = new->locals;

      /* If this is not the outermost LBRAC...RBRAC pair in the
	 function, its local symbols preceded it, and are the ones
	 just recovered from the context stack.  Defined the block for them.

	 If this is the outermost LBRAC...RBRAC pair, there is no
	 need to do anything; leave the symbols that preceded it
	 to be attached to the function's own block.  However, if
	 it is so, we need to indicate that we just moved outside
	 of the function.  */
      if (local_symbols
	  && context_stack_depth > !VARIABLES_INSIDE_BLOCK(desc))
	{
	  /* Muzzle a compiler bug that makes end < start.  */
	  if (new->start_addr > value)
	    new->start_addr = value;
	  /* Make a block for the local symbols within.  */
	  finish_block (0, &local_symbols, new->old_blocks,
			new->start_addr + last_source_start_addr,
			value + last_source_start_addr);
	}
      else
	{
	  within_function = 0;
	}
      if (VARIABLES_INSIDE_BLOCK(desc))
	/* Now pop locals of block just finished.  */
	local_symbols = new->locals;
      break;

    case N_FN | N_EXT:
      /* This kind of symbol supposedly indicates the start
	 of an object file.  In fact this type does not appear.  */
      break;

    case N_SO:
      /* This type of symbol indicates the start of data
	 for one source file.
	 Finish the symbol table of the previous source file
	 (if any) and start accumulating a new symbol table.  */
#ifdef PCC_SOL_BROKEN
      /* pcc bug, occasionally puts out SO for SOL.  */
      if (context_stack_depth > 0)
	{
	  start_subfile (name);
	  break;
	}
#endif
      if (last_source_file)
	end_symtab (value);
      start_symtab (name, value);
      break;

    case N_SOL:
      /* This type of symbol indicates the start of data for
	 a sub-source-file, one whose contents were copied or
	 included in the compilation of the main source file
	 (whose name was given in the N_SO symbol.)  */
      start_subfile (name);
      break;

#ifdef N_BINCL
    case N_BINCL:
      push_subfile ();
      add_new_header_file (name, value);
      start_subfile (name);
      break;

    case N_EINCL:
      start_subfile (pop_subfile ());
      break;

    case N_EXCL:
      add_old_header_file (name, value);
      break;
#endif /* have N_BINCL */

    case N_SLINE:
      /* This type of "symbol" really just records
	 one line-number -- core-address correspondence.
	 Enter it in the line list for this symbol table.  */
      record_line (desc, value);
      break;

    case N_BCOMM:
      if (common_block)
	error ("Invalid symbol data: common within common at symtab pos %d",
	       symnum);
      common_block = local_symbols;
      common_block_i = local_symbols ? local_symbols->nsyms : 0;
      break;

    case N_ECOMM:
      /* Symbols declared since the BCOMM are to have the common block
	 start address added in when we know it.  common_block points to
	 the first symbol after the BCOMM in the local_symbols list;
	 copy the list and hang it off the symbol for the common block name
	 for later fixup.  */
      {
	int i;
	struct pending *link = local_symbols;
	struct symbol *sym =
	  (struct symbol *) xmalloc (sizeof (struct symbol));
	bzero (sym, sizeof *sym);
	SYMBOL_NAME (sym) = savestring (name, strlen (name));
	SYMBOL_CLASS (sym) = LOC_BLOCK;
	SYMBOL_NAMESPACE (sym) = (enum namespace)((long)
	  copy_pending (local_symbols, common_block_i, common_block));
	i = hashname (SYMBOL_NAME (sym));
	SYMBOL_VALUE (sym) = (int) global_sym_chain[i];
	global_sym_chain[i] = sym;
	common_block = 0;
	break;
      }

    case N_ECOML:
    case N_LENG:
      break;

    default:
      if (name)
	define_symbol (value, name, desc);
    }
}

/* This function was added for C++ functionality.  I presume that it
   condenses the bunches formed by reading in an additional .o file
   (incremental linking). */

static void
condense_addl_misc_bunches ()
{
  register int i, j;
  register struct misc_bunch *bunch;
#ifdef NAMES_HAVE_UNDERSCORE
  int offset = 1;
#else
  int offset = 0;
#endif

  misc_function_vector
    = (struct misc_function *)  xrealloc (misc_function_vector,
					  (misc_count + misc_function_count) * sizeof (struct misc_function));

  j = misc_function_count;
  bunch = misc_bunch;
  while (bunch)
    {
      for (i = 0; i < misc_bunch_index; i++)
	{
	  misc_function_vector[j] = bunch->contents[i];
	  misc_function_vector[j].name
	    = concat (misc_function_vector[j].name
		      + (misc_function_vector[j].name[0] == '_' ? offset : 0),
		      "", "");
	  j++;
	}
      bunch = bunch->next;
      misc_bunch_index = MISC_BUNCH_SIZE;
    }

  misc_function_count += misc_count;

  /* Sort the misc functions by address.  */

  qsort (misc_function_vector, misc_function_count,
	 sizeof (struct misc_function),  compare_misc_functions);
}


/* Read in another .o file and create a symtab entry for it.*/

static void
read_addl_syms (desc, stringtab, nlistlen, text_addr, text_size)
     int desc;
     register char *stringtab;
     register int nlistlen;
     unsigned text_addr;
     int text_size;
{
  FILE *stream = fdopen (desc, "r");
  register char *namestring;
  register struct symbol *sym, *prev;
  int hash;

#ifdef N_BINCL
  subfile_stack = 0;
#endif

  last_source_file = 0;
  bzero (global_sym_chain, sizeof global_sym_chain);
  symtab_input_desc = desc;
  stringtab_global = stringtab;
  fill_symbuf ();

  for (symnum = 0; symnum < nlistlen; symnum++)
    {
      struct nlist *bufp;
      unsigned char type;

      QUIT;	/* allow this to be interruptable */
      if (symbuf_idx == symbuf_end)
	fill_symbuf ();
      bufp = &symbuf[symbuf_idx++];
      type = bufp->n_type & N_TYPE;
      namestring = bufp->n_un.n_strx + stringtab;

      if( (type == N_TEXT) || (type == N_DATA) || (type == N_BSS) )
	{
	  /* Relocate this file's symbol table information
	     to the address it has been loaded into.  */
	  bufp->n_value += text_addr;
	}

      type = bufp->n_type;

      if (type & N_STAB)
	process_one_symbol (type, bufp->n_desc,
			    bufp->n_value, namestring);
      /* A static text symbol whose name ends in ".o"
	 can only mean the start of another object file.
	 So end the symtab of the source file we have been processing.
	 This is how we avoid counting the libraries as part
	 or the last source file.
	 Also this way we find end of first object file (crt0).  */
      else if ((type == N_TEXT
#ifdef N_NBTEXT
		|| type == N_NBTEXT
#endif
		)
	       && (!strcmp (namestring + strlen (namestring) - 2, ".o"))
	       || ! strncmp (namestring, "-l", 2))
	{
	  if (last_source_file)
	    end_symtab (bufp->n_value);
	}
      else if (type & N_EXT || type == N_TEXT
#ifdef N_NBTEXT
	       || type == N_NBTEXT
#endif
	       )
	{
	  int used_up = 0;

	  /* Record the location of _etext.  */
	  if (type == (N_TEXT | N_EXT)
	      && !strcmp (namestring, "_etext"))
	    end_of_text_addr = bufp->n_value;

#if 0
	  /* 25 Sep 89: The following seems to be stolen from
	     read_ofile_symtab, and is wrong here (i.e. there was no
	     first pass for add-file symbols).  */
	  /* This shouldn't be necessary, as we now do all of this work
	     in scan_global syms and all misc functions should have been
	     recorded on the first pass.  */
	  /* Global symbol: see if we came across a dbx definition
	     for a corresponding symbol.  If so, store the value.
	     Remove syms from the chain when their values are stored,
	     but search the whole chain, as there may be several syms
	     from different files with the same name.  */
	  if (type & N_EXT)
	    {
	      prev = 0;
#ifdef NAMES_HAVE_UNDERSCORE
	      hash = hashname (namestring + 1);
#else /* not NAMES_HAVE_UNDERSCORE */
	      hash = hashname (namestring);
#endif /* not NAMES_HAVE_UNDERSCORE */
	      for (sym = global_sym_chain[hash];
		   sym;)
		{
		  if (
#ifdef NAMES_HAVE_UNDERSCORE
		      *namestring == '_'
		      && namestring[1] == SYMBOL_NAME (sym)[0]
		      &&
		      !strcmp (namestring + 2, SYMBOL_NAME (sym) + 1)
#else /* NAMES_HAVE_UNDERSCORE */
		      namestring[0] == SYMBOL_NAME (sym)[0]
		      &&
		      !strcmp (namestring + 1, SYMBOL_NAME (sym) + 1)
#endif /* NAMES_HAVE_UNDERSCORE */
		      )
		    {
		      if (prev)
			SYMBOL_VALUE (prev) = SYMBOL_VALUE (sym);
		      else
			global_sym_chain[hash]
			  = (struct symbol *) SYMBOL_VALUE (sym);
		      if (SYMBOL_CLASS (sym) == LOC_BLOCK)
			fix_common_block (sym, bufp->n_value);
		      else
			SYMBOL_VALUE (sym) = bufp->n_value;
		      if (prev)
			sym = (struct symbol *) SYMBOL_VALUE (prev);
		      else
			sym = global_sym_chain[hash];

		      used_up = 1;
		    }
		  else
		    {
		      prev = sym;
		      sym = (struct symbol *) SYMBOL_VALUE (sym);
		    }
		}
	    }

	  /* Defined global or text symbol: record as a misc function
	     if it didn't give its address to a debugger symbol above.  */
	  if (type <= (N_TYPE | N_EXT)
	      && type != N_EXT
	      && ! used_up)
	    record_misc_function (namestring, bufp->n_value,
				  bufp->n_type);
#endif /* 0 */
	}
    }

  if (last_source_file)
    end_symtab (text_addr + text_size);

  fclose (stream);
}

/* C++:
   This function allows the addition of incrementally linked object files.
   Since this has a fair amount of code in common with symbol_file_command,
   it might be worthwhile to consolidate things, as was done with
   read_dbx_symtab and condense_misc_bunches. */

void
add_file_command (arg_string)
     char* arg_string;
{
  register int desc;
  DECLARE_FILE_HEADERS;
  struct nlist *nlist;
  char *stringtab;
  long buffer;
  register int val;
  extern void close ();
  struct cleanup *old_chain;
  struct symtab *symseg;
  struct stat statbuf;
  char *name;
  unsigned text_addr;

  if (arg_string == 0)
    error ("add-file takes a file name and an address");

  arg_string = tilde_expand (arg_string);
  make_cleanup (free, arg_string);

  for( ; *arg_string == ' '; arg_string++ );
  name = arg_string;
  for( ; *arg_string && *arg_string != ' ' ; arg_string++ );
  *arg_string++ = (char) 0;

  if (name[0] == 0)
    error ("add-file takes a file name and an address");

  text_addr = parse_and_eval_address (arg_string);

  dont_repeat ();

  if (!query ("add symbol table from filename \"%s\" at text_addr = 0x%x\n",
	      name, text_addr))
    error ("Not confirmed.");

  desc = open (name, O_RDONLY);
  if (desc < 0)
    perror_with_name (name);

  old_chain = make_cleanup (close, desc);

  READ_FILE_HEADERS (desc, name);

  if (NUMBER_OF_SYMBOLS == 0)
    {
      printf ("%s does not have a symbol-table.\n", name);
      fflush (stdout);
      return;
    }

  printf ("Reading symbol data from %s...", name);
  fflush (stdout);

  /* Now read the string table, all at once.  */
  val = lseek (desc, STRING_TABLE_OFFSET, 0);
  if (val < 0)
    perror_with_name (name);
  if (stat (name, &statbuf) < 0)
    perror_with_name (name);
  READ_STRING_TABLE_SIZE (buffer);
  if (buffer >= 0 && buffer < statbuf.st_size)
    {
#ifdef BROKEN_LARGE_ALLOCA
      stringtab = (char *) xmalloc (buffer);
      make_cleanup (free, stringtab);
#else
      stringtab = (char *) alloca (buffer);
#endif
    }
  else
    stringtab = NULL;
  if (stringtab == NULL)
    error ("ridiculous string table size: %d bytes", buffer);

  /* Usually READ_STRING_TABLE_SIZE will have shifted the file pointer.
     Occaisionally, it won't.  */
  val = lseek (desc, STRING_TABLE_OFFSET, 0);
  if (val < 0)
    perror_with_name (name);
  val = myread (desc, stringtab, buffer);
  if (val < 0)
    perror_with_name (name);

  /* Symsegs are no longer supported by GDB.  Setting symseg_chain to
     0 is easier than finding all the symseg code and eliminating it.  */
  symseg_chain = 0;

  /* Position to read the symbol table.  Do not read it all at once. */
  val = lseek (desc, SYMBOL_TABLE_OFFSET, 0);
  if (val < 0)
    perror_with_name (name);

  init_misc_functions ();
  make_cleanup (discard_misc_bunches, 0);
  init_header_files ();
  make_cleanup (free_header_files, 0);
  free_pendings = 0;
  pending_blocks = 0;
  file_symbols = 0;
  global_symbols = 0;
  make_cleanup (really_free_pendings, 0);

  read_addl_syms (desc, stringtab, NUMBER_OF_SYMBOLS, text_addr,
		  SIZE_OF_TEXT_SEGMENT);


  /* Sort symbols alphabetically within each block.  */

  sort_syms ();

  /* Go over the misc functions and install them in vector.  */

  condense_addl_misc_bunches (1);

  /* Don't allow char * to have a typename (else would get caddr_t.)  */

  TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;

  do_cleanups (old_chain);

  /* Free the symtabs made by read_symsegs, but not their contents,
     which have been copied into symtabs on symtab_list.  */
  while (symseg_chain)
    {
      register struct symtab *s = symseg_chain->next;
      free (symseg_chain);
      symseg_chain = s;
    }

  printf ("done.\n");
  fflush (stdout);
}

/* Read a number by which a type is referred to in dbx data,
   or perhaps read a pair (FILENUM, TYPENUM) in parentheses.
   Just a single number N is equivalent to (0,N).
   Return the two numbers by storing them in the vector TYPENUMS.
   TYPENUMS will then be used as an argument to dbx_lookup_type.  */

static void
read_type_number (pp, typenums)
     register char **pp;
     register int *typenums;
{
  if (**pp == '(')
    {
      (*pp)++;
      typenums[0] = read_number (pp, ',');
      typenums[1] = read_number (pp, ')');
    }
  else
    {
      typenums[0] = 0;
      typenums[1] = read_number (pp, 0);
    }
}



static struct symbol *
define_symbol (value, string, desc)
     int value;
     char *string;
     int desc;
{
  register struct symbol *sym
    = (struct symbol *) obstack_alloc (symbol_obstack, sizeof (struct symbol));
  char *p = (char *) index (string, ':');
  int deftype;
  register int i;

  /* Ignore syms with empty names.  */
  if (string[0] == 0)
    return 0;

  /* Ignore old-style symbols from cc -go  */
  if (p == 0)
    return 0;

  SYMBOL_NAME (sym)
    = (char *) obstack_alloc (symbol_obstack, ((p - string) + 1));
  /* Open-coded bcopy--saves function call time.  */
  {
    register char *p1 = string;
    register char *p2 = SYMBOL_NAME (sym);
    while (p1 != p)
      *p2++ = *p1++;
    *p2++ = '\0';
  }
  p++;
  /* Determine the type of name being defined.  */
  if ((*p >= '0' && *p <= '9') || *p == '(')
    deftype = 'l';
  else
    deftype = *p++;

  /* c is a special case, not followed by a type-number.
     SYMBOL:c=iVALUE for an integer constant symbol.
     SYMBOL:c=rVALUE for a floating constant symbol.
     SYMBOL:c=eTYPE,INTVALUE for an enum constant symbol.
        e.g. "b:c=e6,0" for "const b = blob1"
	(where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;").  */
  if (deftype == 'c')
    {
      if (*p++ != '=')
	error ("Invalid symbol data at symtab pos %d.", symnum);
      switch (*p++)
	{
	case 'r':
	  {
	    double d = atof (p);
	    char *value;

	    SYMBOL_TYPE (sym) = builtin_type_double;
	    value = (char *) obstack_alloc (symbol_obstack, sizeof (double));
	    bcopy (&d, value, sizeof (double));
	    SYMBOL_VALUE_BYTES (sym) = value;
	    SYMBOL_CLASS (sym) = LOC_CONST_BYTES;
	  }
	  break;
	case 'i':
	  {
	    SYMBOL_TYPE (sym) = builtin_type_int;
	    SYMBOL_VALUE (sym) = atoi (p);
	    SYMBOL_CLASS (sym) = LOC_CONST;
	  }
	  break;
	case 'e':
	  /* SYMBOL:c=eTYPE,INTVALUE for an enum constant symbol.
	     e.g. "b:c=e6,0" for "const b = blob1"
	     (where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;").  */
	  {
	    int typenums[2];
	    
	    read_type_number (&p, typenums);
	    if (*p++ != ',')
	      error ("Invalid symbol data: no comma in enum const symbol");
	    
	    SYMBOL_TYPE (sym) = *dbx_lookup_type (typenums);
	    SYMBOL_VALUE (sym) = atoi (p);
	    SYMBOL_CLASS (sym) = LOC_CONST;
	  }
	  break;
	default:
	  error ("Invalid symbol data at symtab pos %d.", symnum);
	}
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &file_symbols);
      return sym;
    }

  /* Now usually comes a number that says which data type,
     and possibly more stuff to define the type
     (all of which is handled by read_type)  */

  if (deftype == 'p' && *p == 'F')
    /* pF is a two-letter code that means a function parameter in Fortran.
       The type-number specifies the type of the return value.
       Translate it into a pointer-to-function type.  */
    {
      p++;
      SYMBOL_TYPE (sym)
	= lookup_pointer_type (lookup_function_type (read_type (&p)));
    }
  else
    {
      struct type *type = read_type (&p);

      if ((deftype == 'F' || deftype == 'f')
	  && TYPE_CODE (type) != TYPE_CODE_FUNC)
	SYMBOL_TYPE (sym) = lookup_function_type (type);
      else
	SYMBOL_TYPE (sym) = type;
    }

  switch (deftype)
    {
    case 'f':
      SYMBOL_CLASS (sym) = LOC_BLOCK;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &file_symbols);
      break;

    case 'F':
      SYMBOL_CLASS (sym) = LOC_BLOCK;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &global_symbols);
      break;

    case 'G':
      /* For a class G (global) symbol, it appears that the
	 value is not correct.  It is necessary to search for the
	 corresponding linker definition to find the value.
	 These definitions appear at the end of the namelist.  */
      i = hashname (SYMBOL_NAME (sym));
      SYMBOL_VALUE (sym) = (int) global_sym_chain[i];
      global_sym_chain[i] = sym;
      SYMBOL_CLASS (sym) = LOC_STATIC;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &global_symbols);
      break;

      /* This case is faked by a conditional above,
	 when there is no code letter in the dbx data.
	 Dbx data never actually contains 'l'.  */
    case 'l':
      SYMBOL_CLASS (sym) = LOC_LOCAL;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &local_symbols);
      break;

    case 'p':
      SYMBOL_CLASS (sym) = LOC_ARG;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &local_symbols);

      /* If it's gcc compiled, if it says `short', believe it.  */
      if (processing_gcc_compilation || BELIEVE_PCC_PROMOTION)
	break;

#if defined(BELIEVE_PCC_PROMOTION_TYPE)
      /* This macro is defined on machines (e.g. sparc) where
	 we should believe the type of a PCC 'short' argument,
	 but shouldn't believe the address (the address is
	 the address of the corresponding int).  Note that
	 this is only different from the BELIEVE_PCC_PROMOTION
	 case on big-endian machines.

	 My guess is that this correction, as opposed to changing
	 the parameter to an 'int' (as done below, for PCC
	 on most machines), is the right thing to do
	 on all machines, but I don't want to risk breaking
	 something that already works.  On most PCC machines,
	 the sparc problem doesn't come up because the calling
	 function has to zero the top bytes (not knowing whether
	 the called function wants an int or a short), so there
	 is no practical difference between an int and a short
	 (except perhaps what happens when the GDB user types
	 "print short_arg = 0x10000;").
	 Hacked for SunOS 4.1 by gnu@cygnus.com.  In 4.1, the compiler
	 actually produces the correct address (we don't need to fix it
	 up).  I made this code adapt so that it will offset the symbol
	 if it was pointing at an int-aligned location and not
	 otherwise.  This way you can use the same gdb for 4.0.x and
	 4.1 systems.  */

      if (0 == SYMBOL_VALUE (sym) % sizeof (int))
	{
	  if (SYMBOL_TYPE (sym) == builtin_type_char
	      || SYMBOL_TYPE (sym) == builtin_type_unsigned_char)
	    SYMBOL_VALUE (sym) += 3;
	  else if (SYMBOL_TYPE (sym) == builtin_type_short
	      || SYMBOL_TYPE (sym) == builtin_type_unsigned_short)
	    SYMBOL_VALUE (sym) += 2;
	}
      break;

#else /* no BELIEVE_PCC_PROMOTION_TYPE.  */

      /* If PCC says a parameter is a short or a char,
	 it is really an int.  */
      if (SYMBOL_TYPE (sym) == builtin_type_char
	  || SYMBOL_TYPE (sym) == builtin_type_short)
	SYMBOL_TYPE (sym) = builtin_type_int;
      else if (SYMBOL_TYPE (sym) == builtin_type_unsigned_char
	       || SYMBOL_TYPE (sym) == builtin_type_unsigned_short)
	SYMBOL_TYPE (sym) = builtin_type_unsigned_int;
      break;

#endif /* no BELIEVE_PCC_PROMOTION_TYPE.  */

    case 'P':
      SYMBOL_CLASS (sym) = LOC_REGPARM;
      SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (value);
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &local_symbols);
      break;

    case 'r':
/* XXX */
#ifdef sparc
{
	struct symbol *s0;

	/*
	 * If we see a parm decl immediately followed by a reg decl of
	 * the same name (and in the same block), we change it to a single 
	 * instance of a reg parm.  Sun's cc will generate these.
	 */
	if (local_symbols && 
	    (s0 = local_symbols->symbol[local_symbols->nsyms - 1]) &&
	    SYMBOL_CLASS(s0) == LOC_ARG && 
	    strcmp(SYMBOL_NAME(s0), SYMBOL_NAME(sym)) == 0) {
		SYMBOL_CLASS (s0) = LOC_REGPARM;
		SYMBOL_VALUE (s0) = STAB_REG_TO_REGNUM (value);
		SYMBOL_NAMESPACE (s0) = VAR_NAMESPACE;
		return s0;
	}
}
#endif
      SYMBOL_CLASS (sym) = LOC_REGISTER;
      SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (value);
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &local_symbols);
      break;

    case 'S':
      /* Static symbol at top level of file */
      SYMBOL_CLASS (sym) = LOC_STATIC;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &file_symbols);
      break;

    case 't':
      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      if (TYPE_NAME (SYMBOL_TYPE (sym)) == 0
	  && (TYPE_FLAGS (SYMBOL_TYPE (sym)) & TYPE_FLAG_PERM) == 0)
	TYPE_NAME (SYMBOL_TYPE (sym)) =
	  obsavestring (SYMBOL_NAME (sym),
			strlen (SYMBOL_NAME (sym)));
       /* C++ vagaries: we may have a type which is derived from
 	 a base type which did not have its name defined when the
 	 derived class was output.  We fill in the derived class's
 	 base part member's name here in that case.  */
       else if ((TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_STRUCT
		 || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_UNION)
		&& TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)))
	 {
	   int i;
	   for (i = TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)); i > 0; i--)
	     if (TYPE_FIELD_NAME (SYMBOL_TYPE (sym), i - 1) == 0)
	       TYPE_FIELD_NAME (SYMBOL_TYPE (sym), i - 1) =
		 TYPE_NAME (TYPE_BASECLASS (SYMBOL_TYPE (sym), i));
	 }

      add_symbol_to_list (sym, &file_symbols);
      break;

    case 'T':
      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
      if (TYPE_NAME (SYMBOL_TYPE (sym)) == 0
	  && (TYPE_FLAGS (SYMBOL_TYPE (sym)) & TYPE_FLAG_PERM) == 0)
	TYPE_NAME (SYMBOL_TYPE (sym))
	  = obconcat ("",
		      (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_ENUM
		       ? "enum "
		       : (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_STRUCT
			  ? "struct " : "union ")),
		      SYMBOL_NAME (sym));
      add_symbol_to_list (sym, &file_symbols);
      break;

    case 'V':
      /* Static symbol of local scope */
      SYMBOL_CLASS (sym) = LOC_STATIC;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &local_symbols);
      break;

    case 'v':
      /* Reference parameter */
      SYMBOL_CLASS (sym) = LOC_REF_ARG;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &local_symbols);
      break;

    case 'X':
      /* This is used by Sun FORTRAN for "function result value".
	 Sun claims ("dbx and dbxtool interfaces", 2nd ed)
	 that Pascal uses it too, but when I tried it Pascal used
	 "x:3" (local symbol) instead.  */
      SYMBOL_CLASS (sym) = LOC_LOCAL;
      SYMBOL_VALUE (sym) = value;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      add_symbol_to_list (sym, &local_symbols);
      break;

    default:
      error ("Invalid symbol data: unknown symbol-type code `%c' at symtab pos %d.", deftype, symnum);
    }
  return sym;
}

/* What about types defined as forward references inside of a small lexical
   scope?  */
/* Add a type to the list of undefined types to be checked through
   once this file has been read in.  */
static void
add_undefined_type (type)
     struct type *type;
{
  if (undef_types_length == undef_types_allocated)
    {
      undef_types_allocated *= 2;
      undef_types = (struct type **)
	xrealloc (undef_types,
		  undef_types_allocated * sizeof (struct type *));
    }
  undef_types[undef_types_length++] = type;
}

/* Add here something to go through each undefined type, see if it's
   still undefined, and do a full lookup if so.  */
static void
cleanup_undefined_types ()
{
  struct type **type, *ntype;
  struct symbol *sym;

  for (type = undef_types; type < undef_types + undef_types_length; type++)
    {
      struct type *ntype = 0;
      /* Reasonable test to see if it's been defined since.  */
      if (TYPE_NFIELDS (*type) == 0)
	{
	  struct pending *ppt;
	  int i;
	  /* Name of the type, without "struct" or "union" */
	  char *typename = TYPE_NAME (*type);

	  if (!strncmp (typename, "struct ", 7))
	    typename += 7;
	  if (!strncmp (typename, "union ", 6))
	    typename += 6;

	  for (ppt = file_symbols; ppt; ppt = ppt->next)
	    for (i = 0; i < ppt->nsyms; i++)
	      {
		struct symbol *sym = ppt->symbol[i];

		if (SYMBOL_CLASS (sym) == LOC_TYPEDEF
		    && SYMBOL_NAMESPACE (sym) == STRUCT_NAMESPACE
		    && (TYPE_CODE (SYMBOL_TYPE (sym)) ==
			TYPE_CODE (*type))
		    && !strcmp (SYMBOL_NAME (sym), typename))
		  bcopy (SYMBOL_TYPE (sym), *type, sizeof (struct type));
	      }
	}
      else
	/* It has been defined; don't mark it as a stub.  */
	TYPE_FLAGS (*type) &= ~TYPE_FLAG_STUB;
    }
  undef_types_length = 0;
}



/* Read a dbx type reference or definition;
   return the type that is meant.
   This can be just a number, in which case it references
   a type already defined and placed in type_vector.
   Or the number can be followed by an =, in which case
   it means to define a new type according to the text that
   follows the =.  */

static
struct type *
read_type (pp)
     register char **pp;
{
  register struct type *type = 0;
  register int n;
  struct type *type1;
  int typenums[2];
  int xtypenums[2];
  char *tmpc;

  /* Read type number if present.  The type number may be omitted.
     for instance in a two-dimensional array declared with type
     "ar1;1;10;ar1;1;10;4".  */
  if ((**pp >= '0' && **pp <= '9')
      || **pp == '(')
    {
      read_type_number (pp, typenums);
      
      /* Detect random reference to type not yet defined.
	 Allocate a type object but leave it zeroed.  */
      if (**pp != '=')
	return dbx_alloc_type (typenums);

      *pp += 2;
    }
  else
    {
      /* 'typenums=' not present, type is anonymous.  Read and return
	 the definition, but don't put it in the type vector.  */
      typenums[0] = typenums[1] = -1;
      *pp += 1;
    }
      
  switch ((*pp)[-1])
    {
    case 'x':
      {
	enum type_code code;

	/* Used to index through file_symbols.  */
	struct pending *ppt;
	int i;
	
	/* Name including "struct", etc.  */
	char *type_name;
	
	/* Name without "struct", etc.  */
	char *type_name_only;

	{
	  char *prefix;
	  char *from, *to;
	  
	  /* Set the type code according to the following letter.  */
	  switch ((*pp)[0])
	    {
	    case 's':
	      code = TYPE_CODE_STRUCT;
	      prefix = "struct ";
	      break;
	    case 'u':
	      code = TYPE_CODE_UNION;
	      prefix = "union ";
	      break;
	    case 'e':
	      code = TYPE_CODE_ENUM;
	      prefix = "enum ";
	      break;
	    default:
	      error ("Bad type cross reference at symnum: %d.", symnum);
	    }
	  
	  to = type_name = (char *)
	    obstack_alloc (symbol_obstack,
			   (strlen (prefix) +
			    ((char *) index (*pp, ':') - (*pp)) + 1));
	
	  /* Copy the prefix.  */
	  from = prefix;
	  while (*to++ = *from++)
	    ;
	  to--; 
	
	  type_name_only = to;

	  /* Copy the name.  */
	  from = *pp + 1;
	  while ((*to++ = *from++) != ':')
	    ;
	  *--to = '\0';
	  
	  /* Set the pointer ahead of the name which we just read.  */
	  *pp = from;
	
#if 0
	  /* The following hack is clearly wrong, because it doesn't
	     check whether we are in a baseclass.  I tried to reproduce
	     the case that it is trying to fix, but I couldn't get
	     g++ to put out a cross reference to a basetype.  Perhaps
	     it doesn't do it anymore.  */
	  /* Note: for C++, the cross reference may be to a base type which
	     has not yet been seen.  In this case, we skip to the comma,
	     which will mark the end of the base class name.  (The ':'
	     at the end of the base class name will be skipped as well.)
	     But sometimes (ie. when the cross ref is the last thing on
	     the line) there will be no ','.  */
	  from = (char *) index (*pp, ',');
	  if (from)
	    *pp = from;
#endif /* 0 */
	}

	/* Now check to see whether the type has already been declared.  */
	/* This is necessary at least in the case where the
	   program says something like
	     struct foo bar[5];
	   The compiler puts out a cross-reference; we better find
	   set the length of the structure correctly so we can
	   set the length of the array.  */
	for (ppt = file_symbols; ppt; ppt = ppt->next)
	  for (i = 0; i < ppt->nsyms; i++)
	    {
	      struct symbol *sym = ppt->symbol[i];

	      if (SYMBOL_CLASS (sym) == LOC_TYPEDEF
		  && SYMBOL_NAMESPACE (sym) == STRUCT_NAMESPACE
		  && (TYPE_CODE (SYMBOL_TYPE (sym)) == code)
		  && !strcmp (SYMBOL_NAME (sym), type_name_only))
		{
		  obstack_free (symbol_obstack, type_name);
		  type = SYMBOL_TYPE (sym);
		  return type;
		}
	    }
	
	/* Didn't find the type to which this refers, so we must
	   be dealing with a forward reference.  Allocate a type
	   structure for it, and keep track of it so we can
	   fill in the rest of the fields when we get the full
	   type.  */
	type = dbx_alloc_type (typenums);
	TYPE_CODE (type) = code;
	TYPE_NAME (type) = type_name;

	TYPE_FLAGS (type) |= TYPE_FLAG_STUB;

	add_undefined_type (type);
	return type;
      }

    case '0':
    case '1':
    case '2':
    case '3':
    case '4':
    case '5':
    case '6':
    case '7':
    case '8':
    case '9':
    case '(':
      (*pp)--;
      read_type_number (pp, xtypenums);
      type = *dbx_lookup_type (xtypenums);
      if (type == 0)
	type = builtin_type_void;
      if (typenums[0] != -1)
	*dbx_lookup_type (typenums) = type;
      break;

    case '*':
      type1 = read_type (pp);
      if (TYPE_POINTER_TYPE (type1))
	{
	  type = TYPE_POINTER_TYPE (type1);
	  if (typenums[0] != -1)
	    *dbx_lookup_type (typenums) = type;
	}
      else
	{
	  type = dbx_alloc_type (typenums);
	  smash_to_pointer_type (type, type1);
	}
      break;

    case '@':
      {
	struct type *domain = read_type (pp);
	char c;
	struct type *memtype;

	if (*(*pp)++ != ',')
	  error ("invalid member type data format, at symtab pos %d.",
		 symnum);

	memtype = read_type (pp);
	type = dbx_alloc_type (typenums);
	smash_to_member_type (type, domain, memtype);
      }
      break;

    case '#':
      {
	struct type *domain = read_type (pp);
	char c;
	struct type *return_type;
	struct type **args;

	if (*(*pp)++ != ',')
	  error ("invalid member type data format, at symtab pos %d.",
		 symnum);

	return_type = read_type (pp);
	args = read_args (pp, ';');
	type = dbx_alloc_type (typenums);
	smash_to_method_type (type, domain, return_type, args);
      }
      break;

    case '&':
      type1 = read_type (pp);
      if (TYPE_REFERENCE_TYPE (type1))
	{
	  type = TYPE_REFERENCE_TYPE (type1);
	  if (typenums[0] != -1)
	    *dbx_lookup_type (typenums) = type;
	}
      else
	{
	  type = dbx_alloc_type (typenums);
	  smash_to_reference_type (type, type1);
	}
      break;

    case 'f':
      type1 = read_type (pp);
      if (TYPE_FUNCTION_TYPE (type1))
	{
	  type = TYPE_FUNCTION_TYPE (type1);
	  if (typenums[0] != -1)
	    *dbx_lookup_type (typenums) = type;
	}
      else
	{
	  type = dbx_alloc_type (typenums);
	  smash_to_function_type (type, type1);
	}
      break;

    case 'r':
      type = read_range_type (pp, typenums);
      if (typenums[0] != -1)
	*dbx_lookup_type (typenums) = type;
      break;

    case 'e':
      type = dbx_alloc_type (typenums);
      type = read_enum_type (pp, type);
      *dbx_lookup_type (typenums) = type;
      break;

    case 's':
      type = dbx_alloc_type (typenums);
      type = read_struct_type (pp, type);
      break;

    case 'u':
      type = dbx_alloc_type (typenums);
      type = read_struct_type (pp, type);
      TYPE_CODE (type) = TYPE_CODE_UNION;
      break;

    case 'a':
      if (*(*pp)++ != 'r')
	error ("Invalid symbol data: unrecognized type-code `a%c' %s %d.",
	       (*pp)[-1], "at symtab position", symnum);

      type = dbx_alloc_type (typenums);
      type = read_array_type (pp, type);
      break;

    default:
      error ("Invalid symbol data: unrecognized type-code `%c' at symtab pos %d.",
	     (*pp)[-1], symnum);
    }

  if (type == 0)
    abort ();

#if 0
  /* If this is an overriding temporary alteration for a header file's
     contents, and this type number is unknown in the global definition,
     put this type into the global definition at this type number.  */
  if (header_file_prev_index >= 0)
    {
      register struct type **tp
        = explicit_lookup_type (header_file_prev_index, typenums[1]);
      if (*tp == 0)
	*tp = type;
    }
#endif
  return type;
}

/* This page contains subroutines of read_type.  */

/* Read the description of a structure (or union type)
   and return an object describing the type.  */

static struct type *
read_struct_type (pp, type)
     char **pp;
     register struct type *type;
{
  struct nextfield
    {
      struct nextfield *next;
      int visibility;
      struct field field;
    };

  struct next_fnfield
    {
      struct next_fnfield *next;
      int visibility;
      struct fn_field fn_field;
    };

  struct next_fnfieldlist
    {
      struct next_fnfieldlist *next;
      struct fn_fieldlist fn_fieldlist;
    };

  register struct nextfield *list = 0;
  struct nextfield *new;
  int totalsize;
  char *name;
  register char *p;
  int nfields = 0;
  register int n;

  register struct next_fnfieldlist *mainlist = 0;
  int nfn_fields = 0;
  int read_possible_virtual_info = 0;

  if (TYPE_MAIN_VARIANT (type) == 0)
    {
      TYPE_MAIN_VARIANT (type) = type;
    }

  TYPE_CODE (type) = TYPE_CODE_STRUCT;

  /* First comes the total size in bytes.  */

  TYPE_LENGTH (type) = read_number (pp, 0);

  /* C++: Now, if the class is a derived class, then the next character
     will be a '!', followed by the number of base classes derived from.
     Each element in the list contains visibility information,
     the offset of this base class in the derived structure,
     and then the base type. */
  if (**pp == '!')
    {
      int i, n_baseclasses, offset;
      struct type **baseclass_vec;
      struct type *baseclass;
      int via_public;

      /* Nonzero if it is a virtual baseclass, i.e.,

	 struct A{};
	 struct B{};
	 struct C : public B, public virtual A {};

	 B is a baseclass of C; A is a virtual baseclass for C.  This is a C++
	 2.0 language feature.  */
      int via_virtual;

      *pp += 1;

      n_baseclasses = read_number (pp, ',');
      baseclass_vec = (struct type **)
	obstack_alloc (symbol_obstack,
		       (n_baseclasses) * sizeof (struct type **)) - 1;

      for (i = 1; i <= n_baseclasses; i++)
	{
	  if (**pp == '\\')
	    *pp = next_symbol_text ();

	  switch (*(*pp)++)
	    {
	    case '0':
	      via_virtual = 0;
	      break;
	    case '1':
	      via_virtual = 1;
	      break;
	    default:
	      error ("Invalid symbol data: bad visibility format at symtab pos %d",
		     symnum);
	    }

	  switch (*(*pp)++)
	    {
	    case '0':
	      via_public = 0;
	      break;
	    case '2':
	      via_public = 1;
	      break;
	    default:
	      error ("Invalid symbol data: bad visibility format at symtab pos %d.",
		     symnum);
	    }

	  /* Offset of the portion of the object corresponding to
	     this baseclass.  Always zero in the absence of
	     multiple inheritance.  */
	  offset = read_number (pp, ',');
	  baseclass = read_type (pp);
	  *pp += 1;		/* skip trailing ';' */

	  if (offset != 0)
	    {
	      static int error_printed = 0;

	      if (!error_printed)
		{
		  fprintf (stderr, 
"\nWarning:  GDB has limited understanding of multiple inheritance...");
		  error_printed = 1;
		}
	      offset = 0;
	    }

	  baseclass_vec[i] = lookup_basetype_type (baseclass, offset, via_virtual, via_public);

          /* Since lookup_basetype_type can copy the type,
	     it might copy a stub type (complete with stub flag).
	     If so, we need to add it to the list of undefined types
	     to clean up later.  Even if lookup_basetype_type
	     didn't copy the type, adding it to the undefined list
	     will not do any harm.  */
          if (TYPE_FLAGS(baseclass_vec[i]) & TYPE_FLAG_STUB)
            add_undefined_type (baseclass_vec[i]);

	  /* Make this baseclass visible for structure-printing purposes.  */
	  new = (struct nextfield *) alloca (sizeof (struct nextfield));
	  new->next = list;
	  list = new;
	  list->field.type = baseclass_vec[i];
	  list->field.name = TYPE_NAME (baseclass_vec[i]);
	  list->field.bitpos = offset;
	  list->field.bitsize = 0;	/* this should be an unpacked field! */
	  nfields++;
	}
      TYPE_N_BASECLASSES (type) = n_baseclasses;
      TYPE_BASECLASSES (type) = baseclass_vec;
    }

  /* Now come the fields, as NAME:?TYPENUM,BITPOS,BITSIZE; for each one.
     At the end, we see a semicolon instead of a field.

     In C++, this may wind up being NAME:?TYPENUM:PHYSNAME; for
     a static field.

     The `?' is a placeholder for one of '+' (public visibility),
     '0' (protected visibility), and '-' (private visibility).  */

  /* We better set p right now, in case there are no fields at all...    */
  p = *pp;

  while (**pp != ';')
    {
      int visibility;

      /* Check for and handle cretinous dbx symbol name continuation!  */
      if (**pp == '\\') *pp = next_symbol_text ();

      /* Get space to record the next field's data.  */
      new = (struct nextfield *) alloca (sizeof (struct nextfield));
      new->next = list;
      list = new;

      /* Get the field name.  */
      p = *pp;
      while (*p != ':') p++;
      list->field.name = obsavestring (*pp, p - *pp);

      /* C++: Check to see if we have hit the methods yet.  */
      if (p[1] == ':')
	break;

      *pp = p + 1;

      /* This means we have a visibility for a field coming. */
      if (**pp == '/')
	{
	  switch (*++*pp)
	    {
	    case '0':
	      visibility = 0;
	      *pp += 1;
	      break;

 	    case '1':
 	      visibility = 1;
 	      *pp += 1;
 	      break;

 	    case '2':
 	      visibility = 2;
 	      *pp += 1;
 	      break;
 	    }
 	}
       /* else normal dbx-style format.  */

      list->field.type = read_type (pp);
      if (**pp == ':')
 	{
 	  list->field.bitpos = (long)-1;
 	  p = ++(*pp);
 	  while (*p != ';') p++;
 	  list->field.bitsize = (long) savestring (*pp, p - *pp);
 	  *pp = p + 1;
 	  nfields++;
 	  continue;
 	}
       else if (**pp != ',')
	 error ("Invalid symbol data: bad structure-type format at symtab pos %d.",
	       symnum);
      (*pp)++;			/* Skip the comma.  */
      list->field.bitpos = read_number (pp, ',');
      list->field.bitsize = read_number (pp, ';');

#if 0
      /* This is wrong because this is identical to the symbols
	 produced for GCC 0-size arrays.  For example:
         typedef union {
	   int num;
	   char str[0];
	 } foo;
	 The code which dumped core in such circumstances should be
	 fixed not to dump core.  */

      /* g++ -g0 can put out bitpos & bitsize zero for a static
	 field.  This does not give us any way of getting its
	 class, so we can't know its name.  But we can just
	 ignore the field so we don't dump core and other nasty
	 stuff.  */
      if (list->field.bitpos == 0
	  && list->field.bitsize == 0)
	{
	  /* Have we given the warning yet?  */
	  static int warning_given = 0;

	  /* Only give the warning once, no matter how many class
	     variables there are.  */
	  if (!warning_given)
	    {
	      warning_given = 1;
	      fprintf_filtered (stderr, "\n\
Warning:  DBX-style class variable debugging information encountered.\n\
You seem to have compiled your program with \
\"g++ -g0\" instead of \"g++ -g\".\n\
Therefore GDB will not know about your class variables.\n\
");
	    }

	  /* Ignore this field.  */
	  list = list->next;
	}
      else
#endif /* 0 */
	{
	  /* Detect an unpacked field and mark it as such.
	     dbx gives a bit size for all fields.
	     Note that forward refs cannot be packed,
	     and treat enums as if they had the width of ints.  */
	  if (TYPE_CODE (list->field.type) != TYPE_CODE_INT
	      && TYPE_CODE (list->field.type) != TYPE_CODE_ENUM)
	    list->field.bitsize = 0;
	  if ((list->field.bitsize == 8 * TYPE_LENGTH (list->field.type)
	       || (TYPE_CODE (list->field.type) == TYPE_CODE_ENUM
		   && (list->field.bitsize
		       == 8 * TYPE_LENGTH (builtin_type_int))
		   )
	       )
	      &&
	      list->field.bitpos % 8 == 0)
	    list->field.bitsize = 0;
	  nfields++;
	}
    }

  /* Now come the method fields, as NAME::methods
     where each method is of the form TYPENUM,ARGS,...:PHYSNAME;
     At the end, we see a semicolon instead of a field.

     For the case of overloaded operators, the format is
     OPERATOR::*.methods, where OPERATOR is the string "operator",
     `*' holds the place for an operator name (such as `+=')
     and `.' marks the end of the operator name.  */
  if (p[1] == ':')
    {
      /* Now, read in the methods.  To simplify matters, we
	 "unread" the name that has been read, so that we can
	 start from the top.  */

      p = *pp;

      /* chill the list of fields: the last entry (at the head)
         is a partially constructed entry which we now scrub.  */
      list = list->next;

      /* For each list of method lists... */
      do
	{
	  int i;
	  struct next_fnfield *sublist = 0;
	  struct fn_field *fn_fields = 0;
	  int length = 0;
	  struct next_fnfieldlist *new_mainlist =
	    (struct next_fnfieldlist *)alloca (sizeof (struct next_fnfieldlist));

	  /* read in the name.  */
	  while (*p != ':') p++;
	  if ((*pp)[0] == 'o' && (*pp)[1] == 'p' && (*pp)[2] == '$')
	    {
	      static char opname[] = "operator";
	      char *o = opname + strlen(opname);

	      /* Skip past '::'.  */
	      p += 2;
	      while (*p != '.')
		*o++ = *p++;
	      new_mainlist->fn_fieldlist.name = savestring (opname, o - opname);
	      /* Skip past '.'  */
	      *pp = p + 1;
	    }
	  else
	    {
	      i = 0;
	      new_mainlist->fn_fieldlist.name = savestring (*pp, p - *pp);
	      /* Skip past '::'.  */
	      *pp = p + 2;
	    }

	  do
	    {
	      struct next_fnfield *new_sublist =
		(struct next_fnfield *)alloca (sizeof (struct next_fnfield));

	      /* Check for and handle cretinous dbx symbol name continuation!  */
	      if (**pp == '\\') *pp = next_symbol_text ();

	      new_sublist->fn_field.type = read_type (pp);
	      if (**pp != ':')
		error ("invalid symtab info for method at symbol number %d.",
		       symnum);
	      *pp += 1;
	      new_sublist->fn_field.args =
		TYPE_ARG_TYPES (new_sublist->fn_field.type);
	      p = *pp;
	      while (*p != ';') p++;
	      new_sublist->fn_field.physname = savestring (*pp, p - *pp);
	      *pp = p + 1;
	      new_sublist->visibility = *(*pp)++ - '0';
	      if (**pp == '\\') *pp = next_symbol_text ();

	      switch (*(*pp)++)
		{
		case '*':
		  /* virtual member function, followed by index.  */
		  new_sublist->fn_field.voffset = read_number (pp, ';') + 1;
		  break;
		case '?':
		  /* static member function.  */
		  new_sublist->fn_field.voffset = 1;
		  break;
		default:
		  /* **pp == '.'.  */
		  /* normal member function.  */
		  new_sublist->fn_field.voffset = 0;
		  break;
		}

	      new_sublist->next = sublist;
	      sublist = new_sublist;
	      length++;
	    }
	  while (**pp != ';');

	  *pp += 1;

	  new_mainlist->fn_fieldlist.fn_fields =
	    (struct fn_field *) obstack_alloc (symbol_obstack,
					       sizeof (struct fn_field) * length);
	  TYPE_FN_PRIVATE_BITS (new_mainlist->fn_fieldlist) =
	    (int *) obstack_alloc (symbol_obstack,
				   sizeof (int) * (1 + (length >> 5)));

	  TYPE_FN_PROTECTED_BITS (new_mainlist->fn_fieldlist) =
	    (int *) obstack_alloc (symbol_obstack,
				   sizeof (int) * (1 + (length >> 5)));

	  for (i = length; sublist; sublist = sublist->next)
	    {
	      new_mainlist->fn_fieldlist.fn_fields[--i] = sublist->fn_field;
	      if (sublist->visibility == 0)
		B_SET (new_mainlist->fn_fieldlist.private_fn_field_bits, i);
	      else if (sublist->visibility == 1)
		B_SET (new_mainlist->fn_fieldlist.protected_fn_field_bits, i);
	    }

	  new_mainlist->fn_fieldlist.length = length;
	  new_mainlist->next = mainlist;
	  mainlist = new_mainlist;
	  nfn_fields++;
	}
      while (**pp != ';');
    }

  *pp += 1;

  /* Now create the vector of fields, and record how big it is.  */

  TYPE_NFIELDS (type) = nfields;
  TYPE_FIELDS (type) = (struct field *) obstack_alloc (symbol_obstack,
						       sizeof (struct field) * nfields);
  TYPE_FIELD_PRIVATE_BITS (type) =
    (int *) obstack_alloc (symbol_obstack,
			   sizeof (int) * (1 + (nfields >> 5)));
  TYPE_FIELD_PROTECTED_BITS (type) =
    (int *) obstack_alloc (symbol_obstack,
			   sizeof (int) * (1 + (nfields >> 5)));

  TYPE_NFN_FIELDS (type) = nfn_fields;
  TYPE_NFN_FIELDS_TOTAL (type) = nfn_fields;

  {
    int i;
    for (i = 1; i <= TYPE_N_BASECLASSES (type); ++i)
      TYPE_NFN_FIELDS_TOTAL (type) +=
	TYPE_NFN_FIELDS_TOTAL (TYPE_BASECLASS (type, i));
  }

  TYPE_FN_FIELDLISTS (type) =
    (struct fn_fieldlist *) obstack_alloc (symbol_obstack,
					   sizeof (struct fn_fieldlist) * nfn_fields);

  /* Copy the saved-up fields into the field vector.  */

  for (n = nfields; list; list = list->next)
    {
      TYPE_FIELD (type, --n) = list->field;
      if (list->visibility == 0)
	SET_TYPE_FIELD_PRIVATE (type, n);
      else if (list->visibility == 1)
	SET_TYPE_FIELD_PROTECTED (type, n);
    }

  for (n = nfn_fields; mainlist; mainlist = mainlist->next)
    TYPE_FN_FIELDLISTS (type)[--n] = mainlist->fn_fieldlist;

  if (**pp == '~')
    {
      *pp += 1;

      if (**pp == '=')
	{
	  TYPE_FLAGS (type)
	    |= TYPE_FLAG_HAS_CONSTRUCTOR | TYPE_FLAG_HAS_DESTRUCTOR;
	  *pp += 1;
	}
      else if (**pp == '+')
	{
	  TYPE_FLAGS (type) |= TYPE_FLAG_HAS_CONSTRUCTOR;
	  *pp += 1;
	}
      else if (**pp == '-')
	{
	  TYPE_FLAGS (type) |= TYPE_FLAG_HAS_DESTRUCTOR;
	  *pp += 1;
	}

      /* Read either a '%' or the final ';'.  */
      if (*(*pp)++ == '%')
	{
	  /* Now we must record the virtual function table pointer's
	     field information.  */

	  struct type *t;
	  int i;

	  t = read_type (pp);
	  p = (*pp)++;
	  while (*p != ';') p++;
	  TYPE_VPTR_BASETYPE (type) = t;
	  if (type == t)
	    {
	      if (TYPE_FIELD_NAME (t, 0) == 0)
		TYPE_VPTR_FIELDNO (type) = i = 0;
	      else for (i = TYPE_NFIELDS (t) - 1; i >= 0; --i)
		if (! strncmp (TYPE_FIELD_NAME (t, i), *pp,
			       strlen (TYPE_FIELD_NAME (t, i))))
		  {
		    TYPE_VPTR_FIELDNO (type) = i;
		    break;
		  }
	      if (i < 0)
		error ("virtual function table field not found");
	    }
	  else
	    TYPE_VPTR_FIELDNO (type) = TYPE_VPTR_FIELDNO (TYPE_BASECLASS (type, 1));
	  *pp = p + 1;
	}
      else
	{
	  TYPE_VPTR_BASETYPE (type) = 0;
	  TYPE_VPTR_FIELDNO (type) = -1;
	}
    }
  else
    {
      TYPE_VPTR_BASETYPE (type) = 0;
      TYPE_VPTR_FIELDNO (type) = -1;
    }

  return type;
}

/* Read a definition of an array type,
   and create and return a suitable type object.
   Also creates a range type which represents the bounds of that
   array.  */
static struct type *
read_array_type (pp, type)
     register char **pp;
     register struct type *type;
{
  struct type *index_type, *element_type, *range_type;
  int lower, upper;
  int adjustable = 0;

  /* Format of an array type:
     "ar<index type>;lower;upper;<array_contents_type>".  Put code in
     to handle this.

     Fortran adjustable arrays use Adigits or Tdigits for lower or upper;
     for these, produce a type like float[][].  */

  index_type = read_type (pp);
  if (*(*pp)++ != ';')
    error ("Invalid symbol data; improper format of array type decl.");

  if (!(**pp >= '0' && **pp <= '9'))
    {
      *pp += 1;
      adjustable = 1;
    }
  lower = read_number (pp, ';');

  if (!(**pp >= '0' && **pp <= '9'))
    {
      *pp += 1;
      adjustable = 1;
    }
  upper = read_number (pp, ';');
  
  element_type = read_type (pp);

  if (adjustable)
    {
      lower = 0;
      upper = -1;
    }

  {
    /* Create range type.  */
    range_type = (struct type *) obstack_alloc (symbol_obstack,
						sizeof (struct type));
    TYPE_CODE (range_type) = TYPE_CODE_RANGE;
    TYPE_TARGET_TYPE (range_type) = index_type;

    /* This should never be needed.  */
    TYPE_LENGTH (range_type) = sizeof (int);

    TYPE_NFIELDS (range_type) = 2;
    TYPE_FIELDS (range_type) =
      (struct field *) obstack_alloc (symbol_obstack,
				      2 * sizeof (struct field));
    TYPE_FIELD_BITPOS (range_type, 0) = lower;
    TYPE_FIELD_BITPOS (range_type, 1) = upper;
  }

  TYPE_CODE (type) = TYPE_CODE_ARRAY;
  TYPE_TARGET_TYPE (type) = element_type;
  TYPE_LENGTH (type) = (upper - lower + 1) * TYPE_LENGTH (element_type);
  TYPE_NFIELDS (type) = 1;
  TYPE_FIELDS (type) =
    (struct field *) obstack_alloc (symbol_obstack,
				    sizeof (struct field));
  TYPE_FIELD_TYPE (type, 0) = range_type;

  return type;
}


/* Read a definition of an enumeration type,
   and create and return a suitable type object.
   Also defines the symbols that represent the values of the type.  */

static struct type *
read_enum_type (pp, type)
     register char **pp;
     register struct type *type;
{
  register char *p;
  char *name;
  register long n;
  register struct symbol *sym;
  int nsyms = 0;
  struct pending **symlist;
  struct pending *osyms, *syms;
  int o_nsyms;

  if (within_function)
    symlist = &local_symbols;
  else
    symlist = &file_symbols;
  osyms = *symlist;
  o_nsyms = osyms ? osyms->nsyms : 0;

  /* Read the value-names and their values.
     The input syntax is NAME:VALUE,NAME:VALUE, and so on.
     A semicolon or comman instead of a NAME means the end.  */
  while (**pp && **pp != ';' && **pp != ',')
    {
      /* Check for and handle cretinous dbx symbol name continuation!  */
      if (**pp == '\\')	*pp = next_symbol_text ();

      p = *pp;
      while (*p != ':') p++;
      name = obsavestring (*pp, p - *pp);
      *pp = p + 1;
      n = read_number (pp, ',');

      sym = (struct symbol *) obstack_alloc (symbol_obstack, sizeof (struct symbol));
      bzero (sym, sizeof (struct symbol));
      SYMBOL_NAME (sym) = name;
      SYMBOL_CLASS (sym) = LOC_CONST;
      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
      SYMBOL_VALUE (sym) = n;
      add_symbol_to_list (sym, symlist);
      nsyms++;
    }

  if (**pp == ';')
    (*pp)++;			/* Skip the semicolon.  */

  /* Now fill in the fields of the type-structure.  */

  TYPE_LENGTH (type) = sizeof (int);
  TYPE_CODE (type) = TYPE_CODE_ENUM;
  TYPE_NFIELDS (type) = nsyms;
  TYPE_FIELDS (type) = (struct field *) obstack_alloc (symbol_obstack, sizeof (struct field) * nsyms);

  /* Find the symbols for the values and put them into the type.
     The symbols can be found in the symlist that we put them on
     to cause them to be defined.  osyms contains the old value
     of that symlist; everything up to there was defined by us.  */
  /* Note that we preserve the order of the enum constants, so
     that in something like "enum {FOO, LAST_THING=FOO}" we print
     FOO, not LAST_THING.  */

  for (syms = *symlist, n = 0; syms; syms = syms->next)
    {
      int j = 0;
      if (syms == osyms)
	j = o_nsyms;
      for (; j < syms->nsyms; j++)
	{
	  struct symbol *sym = syms->symbol[j];
	  SYMBOL_TYPE (sym) = type;
	  TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (sym);
	  TYPE_FIELD_VALUE (type, n) = 0;
	  TYPE_FIELD_BITPOS (type, n) = SYMBOL_VALUE (sym);
	  TYPE_FIELD_BITSIZE (type, n++) = 0;
	}
      if (syms == osyms)
	break;
    }

  return type;
}

#define	MAX_OF_TYPE(t)	((1 << (sizeof (t) - 1)) - 1)
#define MIN_OF_TYPE(t)	(-(1 << (sizeof (t) - 1)))

static struct type *
read_range_type (pp, typenums)
     char **pp;
     int typenums[2];
{
  int rangenums[2];
  long n2, n3;
  int n2bits, n3bits;
  int self_subrange;
  struct type *result_type;
  struct type *index_type;

  /* First comes a type we are a subrange of.
     In C it is usually 0, 1 or the type being defined.  */
  read_type_number (pp, rangenums);
  self_subrange = (rangenums[0] == typenums[0] &&
		   rangenums[1] == typenums[1]);

  /* A semicolon should now follow; skip it.  */
  if (**pp == ';')
    (*pp)++;

  /* The remaining two operands are usually lower and upper bounds
     of the range.  But in some special cases they mean something else.  */
  read_huge_number (pp, ';', &n2, &n2bits);
  read_huge_number (pp, ';', &n3, &n3bits);

  if (n2bits == -1 || n3bits == -1)
    error ("Unrecognized type range %s.", pp);

  if (n2bits != 0 || n3bits != 0)
#ifdef LONG_LONG
    {
      char got_signed = 0;
      char got_unsigned = 0;
      /* Number of bits in the type.  */
      int nbits;

      /* Range from 0 to <large number> is an unsigned large integral type.  */
      if ((n2bits == 0 && n2 == 0) && n3bits != 0)
	{
	  got_unsigned = 1;
	  nbits = n3bits;
	}
      /* Range fro <large number> to <large number>-1 is a large signed
	 integral type.  */
      else if (n2bits != 0 && n3bits != 0 && n2bits == n3bits + 1)
	{
	  got_signed = 1;
	  nbits = n2bits;
	}

      /* Check for "long long".  */
      if (got_signed && nbits == CHAR_BIT * sizeof (long long))
	return builtin_type_long_long;
      if (got_unsigned && nbits == CHAR_BIT * sizeof (long long))
	return builtin_type_unsigned_long_long;

      error ("Large type isn't a long long.");
    }
#else /* LONG_LONG */
    error ("Type long long not supported on this machine.");
#endif

  /* A type defined as a subrange of itself, with bounds both 0, is void.  */
  if (self_subrange && n2 == 0 && n3 == 0)
    return builtin_type_void;

  /* If n3 is zero and n2 is not, we want a floating type,
     and n2 is the width in bytes.

     Fortran programs appear to use this for complex types also,
     and they give no way to distinguish between double and single-complex!
     We don't have complex types, so we would lose on all fortran files!
     So return type `double' for all of those.  It won't work right
     for the complex values, but at least it makes the file loadable.  */

  if (n3 == 0 && n2 > 0)
    {
      if (n2 == sizeof (float))
	return builtin_type_float;
      return builtin_type_double;
    }

  /* If the upper bound is -1, it must really be an unsigned int.  */

  else if (n2 == 0 && n3 == -1)
    {
      if (sizeof (int) == sizeof (long))
	return builtin_type_unsigned_int;
      else
	return builtin_type_unsigned_long;
    }

  /* Special case: char is defined (Who knows why) as a subrange of
     itself with range 0-127.  */
  else if (self_subrange && n2 == 0 && n3 == 127)
    return builtin_type_char;

  /* Assumptions made here: Subrange of self is equivalent to subrange
     of int.  */
  else if (n2 == 0
	   && (self_subrange ||
	       *dbx_lookup_type (rangenums) == builtin_type_int))
    {
      /* an unsigned type */
      if (n3 == UINT_MAX)
	return builtin_type_unsigned_int;
      if (n3 == ULONG_MAX)
	return builtin_type_unsigned_long;
      if (n3 == USHRT_MAX)
	return builtin_type_unsigned_short;
      if (n3 == UCHAR_MAX)
	return builtin_type_unsigned_char;
    }
#ifdef LONG_LONG
  else if (n3 == 0 && n2 == -sizeof (long long))
    return builtin_type_long_long;
#endif
  else if (n2 == -n3 -1)
    {
      /* a signed type */
      if (n3 == INT_MAX)
	return builtin_type_int;
      if (n3 == LONG_MAX)
	 return builtin_type_long;
      if (n3 == SHRT_MAX)
	return builtin_type_short;
      if (n3 == CHAR_MAX)
	return builtin_type_char;
    }

  /* We have a real range type on our hands.  Allocate space and
     return a real pointer.  */

  /* At this point I don't have the faintest idea how to deal with
     a self_subrange type; I'm going to assume that this is used
     as an idiom, and that all of them are special cases.  So . . .  */
  if (self_subrange)
    error ("Type defined as subrange of itself: %s.", pp);

  result_type = (struct type *) obstack_alloc (symbol_obstack,
					       sizeof (struct type));
  bzero (result_type, sizeof (struct type));

  TYPE_TARGET_TYPE (result_type) = (self_subrange ?
				    builtin_type_int :
				    *dbx_lookup_type(rangenums));

  /* We have to figure out how many bytes it takes to hold this
     range type.  I'm going to assume that anything that is pushing
     the bounds of a long was taken care of above.  */
  if (n2 >= MIN_OF_TYPE(char) && n3 <= MAX_OF_TYPE(char))
    TYPE_LENGTH (result_type) = 1;
  else if (n2 >= MIN_OF_TYPE(short) && n3 <= MAX_OF_TYPE(short))
    TYPE_LENGTH (result_type) = sizeof (short);
  else if (n2 >= MIN_OF_TYPE(int) && n3 <= MAX_OF_TYPE(int))
    TYPE_LENGTH (result_type) = sizeof (int);
  else if (n2 >= MIN_OF_TYPE(long) && n3 <= MAX_OF_TYPE(long))
    TYPE_LENGTH (result_type) = sizeof (long);
  else
    error ("Ranged type doesn't fit within known sizes.");

  TYPE_LENGTH (result_type) = TYPE_LENGTH (TYPE_TARGET_TYPE (result_type));
  TYPE_CODE (result_type) = TYPE_CODE_RANGE;
  TYPE_NFIELDS (result_type) = 2;
  TYPE_FIELDS (result_type) =
    (struct field *) obstack_alloc (symbol_obstack,
				    2 * sizeof (struct field));
  bzero (TYPE_FIELDS (result_type), 2 * sizeof (struct field));
  TYPE_FIELD_BITPOS (result_type, 0) = n2;
  TYPE_FIELD_BITPOS (result_type, 1) = n3;

  return result_type;
}

/* Read a number from the string pointed to by *PP.
   The value of *PP is advanced over the number.
   If END is nonzero, the character that ends the
   number must match END, or an error happens;
   and that character is skipped if it does match.
   If END is zero, *PP is left pointing to that character.  */

static long
read_number (pp, end)
     char **pp;
     int end;
{
  register char *p = *pp;
  register long n = 0;
  register int c;
  int sign = 1;

  /* Handle an optional leading minus sign.  */

  if (*p == '-')
    {
      sign = -1;
      p++;
    }

  /* Read the digits, as far as they go.  */

  while ((c = *p++) >= '0' && c <= '9')
    {
      n *= 10;
      n += c - '0';
    }
  if (end)
    {
      if (c && c != end)
	error ("Invalid symbol data: invalid character \\%03o at symbol pos %d.", c, symnum);
    }
  else
    --p;

  *pp = p;
  return n * sign;
}

static void
read_huge_number (pp, end, valu, bits)
     char **pp;
     int end;
     long *valu;
     int *bits;
{
  char *p = *pp;
  int sign = 1;
  long n = 0;
  int radix = 10;
  char overflow = 0;
  int nbits = 0;
  int c;
  long upper_limit;

  /* Handle an optional leading minus sign.  */

  if (*p == '-')
    {
      sign = -1;
      p++;
    }

  /* Leading zero means octal.  GCC uses this to output values larger
     than an int (because that would be hard in decimal).  */
  if (*p == '0')
    {
      radix = 8;
      p++;
    }

  upper_limit = LONG_MAX / radix;
  while ((c = *p++) >= '0' && c <= '9')
    {
      if (n <= upper_limit)
	{
	  n *= radix;
	  n += c - '0';
	}
      else
	overflow = 1;

      /* This depends on large values being output in octal, which is
	 what GCC does. */
      if (radix == 8)
	{
	  if (nbits == 0)
	    {
	      if (c == '0')
		/* Ignore leading zeroes.  */
		;
	      else if (c == '1')
		nbits = 1;
	      else if (c == '2' || c == '3')
		nbits = 2;
	      else
		nbits = 3;
	    }
	  else
	    nbits += 3;
	}
    }
  if (end)
    {
      if (c && c != end)
	{
	  if (bits != NULL)
	    *bits = -1;
	  return;
	}
    }
  else
    --p;

  *pp = p;
  if (overflow)
    {
      if (nbits == 0)
	{
	  /* Large decimal constants are an error (because it is hard to
	     count how many bits are in them).  */
	  if (bits != NULL)
	    *bits = -1;
	  return;
	}

      /* -0x7f is the same as 0x80.  So deal with it by adding one to
	 the number of bits.  */
      if (sign == -1)
	++nbits;
      if (bits)
	*bits = nbits;
    }
  else
    {
      if (valu)
	*valu = n * sign;
      if (bits)
	*bits = 0;
    }
}

/* Read in an argument list. This is a list of types. It is terminated with
   a ':', FYI. Return the list of types read in. */
static struct type **
read_args (pp, end)
     char **pp;
     int end;
{
  struct type *types[1024], **rval; /* allow for fns of 1023 parameters */
  int n = 0;

  while (**pp != end)
    {
      if (**pp != ',')
	error ("Invalid argument list: no ',', at symtab pos %d", symnum);
      *pp += 1;

      /* Check for and handle cretinous dbx symbol name continuation! */
      if (**pp == '\\')
	*pp = next_symbol_text ();

      types[n++] = read_type (pp);
    }
  *pp += 1;			/* get past `end' (the ':' character) */

  if (n == 1)
    {
      rval = (struct type **) xmalloc (2 * sizeof (struct type *));
    }
  else if (TYPE_CODE (types[n-1]) != TYPE_CODE_VOID)
    {
      rval = (struct type **) xmalloc ((n + 1) * sizeof (struct type *));
      bzero (rval + n, sizeof (struct type *));
    }
  else
    {
      rval = (struct type **) xmalloc (n * sizeof (struct type *));
    }
  bcopy (types, rval, n * sizeof (struct type *));
  return rval;
}

/* This function is really horrible, but to avoid it, there would need
   to be more filling in of forward references.  THIS SHOULD BE MOVED OUT
   OF COFFREAD.C AND DBXREAD.C TO SOME PLACE WHERE IT CAN BE SHARED */
int
fill_in_vptr_fieldno (type)
     struct type *type;
{
  if (TYPE_VPTR_FIELDNO (type) < 0)
    TYPE_VPTR_FIELDNO (type) =
      fill_in_vptr_fieldno (TYPE_BASECLASS (type, 1));
  return TYPE_VPTR_FIELDNO (type);
}

/* Copy a pending list, used to record the contents of a common
   block for later fixup. BUG FIX by rde@topexpress.co.uk */
static struct pending *
copy_pending (beg, begi, end)
    struct pending *beg, *end;
    int begi;
{
  struct pending *new = 0;
  struct pending *next;

  /* rde note: `begi' is an offset in block `end', NOT `beg' */
  for (next = beg; next != 0; next = next->next)
    {
      register int j;
      for (j = next == end ? begi : 0; j < next->nsyms; j++)
	add_symbol_to_list (next->symbol[j], &new);

      if (next == end)
        break;
    }
  return new;
}

/* Add a common block's start address to the offset of each symbol
   declared to be in it (by being between a BCOMM/ECOMM pair that uses
   the common block name).  */

static void
fix_common_block (sym, value)
    struct symbol *sym;
    int value;
{
  struct pending *next = (struct pending *) SYMBOL_NAMESPACE (sym);
  for ( ; next; next = next->next)
    {
      register int j;
      for (j = next->nsyms - 1; j >= 0; j--)
	SYMBOL_VALUE (next->symbol[j]) += value;
    }
}

void
_initialize_dbxread ()
{
  symfile = 0;
  header_files = (struct header_file *) 0;
  this_object_header_files = (int *) 0;

  undef_types_allocated = 20;
  undef_types_length = 0;
  undef_types = (struct type **) xmalloc (undef_types_allocated *
					  sizeof (struct type *));

  add_com ("symbol-file", class_files, symbol_file_command,
	   "Load symbol table (in dbx format) from executable file FILE.");

  add_com ("add-file", class_files, add_file_command,
           "Load the symbols from FILE, assuming its code is at TEXT_START.") ;
}

#endif /* READ_DBX_FORMAT */