d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
849bec0e76
freebsd-nq/sys/dev/ipmi/ipmi_smic.c

410 lines
9.7 KiB
C
Raw Normal View History

Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/*-
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/condvar.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/selinfo.h>
#include <machine/bus.h>
#ifdef LOCAL_MODULE
#include <ipmi.h>
#include <ipmivars.h>
#else
#include <sys/ipmi.h>
#include <dev/ipmi/ipmivars.h>
#endif
static void smic_wait_for_tx_okay(struct ipmi_softc *);
static void smic_wait_for_rx_okay(struct ipmi_softc *);
static void smic_wait_for_not_busy(struct ipmi_softc *);
static void smic_set_busy(struct ipmi_softc *);
static void
smic_wait_for_tx_okay(struct ipmi_softc *sc)
{
int flags;
do {
flags = INB(sc, SMIC_FLAGS);
} while (!(flags & SMIC_STATUS_TX_RDY));
}
static void
smic_wait_for_rx_okay(struct ipmi_softc *sc)
{
int flags;
do {
flags = INB(sc, SMIC_FLAGS);
} while (!(flags & SMIC_STATUS_RX_RDY));
}
static void
smic_wait_for_not_busy(struct ipmi_softc *sc)
{
int flags;
do {
flags = INB(sc, SMIC_FLAGS);
} while (flags & SMIC_STATUS_BUSY);
}
static void
smic_set_busy(struct ipmi_softc *sc)
{
int flags;
flags = INB(sc, SMIC_FLAGS);
flags |= SMIC_STATUS_BUSY;
flags &= ~SMIC_STATUS_RESERVED;
OUTB(sc, SMIC_FLAGS, flags);
}
/*
* Start a transfer with a WR_START transaction that sends the NetFn/LUN
* address.
*/
static int
smic_start_write(struct ipmi_softc *sc, u_char data)
{
u_char error, status;
smic_wait_for_not_busy(sc);
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_START);
OUTB(sc, SMIC_DATA, data);
smic_set_busy(sc);
smic_wait_for_not_busy(sc);
status = INB(sc, SMIC_CTL_STS);
if (status != SMIC_SC_SMS_WR_START) {
error = INB(sc, SMIC_DATA);
device_printf(sc->ipmi_dev, "SMIC: Write did not start %02x\n",
error);
return (0);
}
return (1);
}
/*
* Write a byte in the middle of the message (either the command or one of
* the data bytes) using a WR_NEXT transaction.
*/
static int
smic_write_next(struct ipmi_softc *sc, u_char data)
{
u_char error, status;
smic_wait_for_tx_okay(sc);
The IPMI spec is ambiguous (or rather, it contradicts itself) about whether or not the OS has to wait for RX_RDY or TX_RDY to be set before the OS sets the control code in the control/status register. Looking at the interface design, it seems that RX_RDY and TX_RDY are probably there to protect access to the data register and have nothing to do with the control/status register. Nevertheless, try to take what I think is the more conservative approach and always wait for the appropriate [TR]X_RDY flag to be set before writing any of the WR_NEXT, WR_END, RD_START, or RD_NEXT control codes to the control/status register.
2006-10-05 15:38:59 +00:00
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_NEXT);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
OUTB(sc, SMIC_DATA, data);
smic_set_busy(sc);
smic_wait_for_not_busy(sc);
status = INB(sc, SMIC_CTL_STS);
if (status != SMIC_SC_SMS_WR_NEXT) {
error = INB(sc, SMIC_DATA);
device_printf(sc->ipmi_dev, "SMIC: Write did not next %02x\n",
error);
return (0);
}
return (1);
}
/*
* Write the last byte of a transfer to end the write phase via a WR_END
* transaction.
*/
static int
smic_write_last(struct ipmi_softc *sc, u_char data)
{
u_char error, status;
smic_wait_for_tx_okay(sc);
The IPMI spec is ambiguous (or rather, it contradicts itself) about whether or not the OS has to wait for RX_RDY or TX_RDY to be set before the OS sets the control code in the control/status register. Looking at the interface design, it seems that RX_RDY and TX_RDY are probably there to protect access to the data register and have nothing to do with the control/status register. Nevertheless, try to take what I think is the more conservative approach and always wait for the appropriate [TR]X_RDY flag to be set before writing any of the WR_NEXT, WR_END, RD_START, or RD_NEXT control codes to the control/status register.
2006-10-05 15:38:59 +00:00
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_WR_END);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
OUTB(sc, SMIC_DATA, data);
smic_set_busy(sc);
smic_wait_for_not_busy(sc);
status = INB(sc, SMIC_CTL_STS);
if (status != SMIC_SC_SMS_WR_END) {
error = INB(sc, SMIC_DATA);
device_printf(sc->ipmi_dev, "SMIC: Write did not end %02x\n",
error);
return (0);
}
return (1);
}
/*
* Start the read phase of a transfer with a RD_START transaction.
*/
static int
smic_start_read(struct ipmi_softc *sc, u_char *data)
{
u_char error, status;
smic_wait_for_not_busy(sc);
smic_wait_for_rx_okay(sc);
The IPMI spec is ambiguous (or rather, it contradicts itself) about whether or not the OS has to wait for RX_RDY or TX_RDY to be set before the OS sets the control code in the control/status register. Looking at the interface design, it seems that RX_RDY and TX_RDY are probably there to protect access to the data register and have nothing to do with the control/status register. Nevertheless, try to take what I think is the more conservative approach and always wait for the appropriate [TR]X_RDY flag to be set before writing any of the WR_NEXT, WR_END, RD_START, or RD_NEXT control codes to the control/status register.
2006-10-05 15:38:59 +00:00
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_RD_START);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
smic_set_busy(sc);
smic_wait_for_not_busy(sc);
status = INB(sc, SMIC_CTL_STS);
if (status != SMIC_SC_SMS_RD_START) {
error = INB(sc, SMIC_DATA);
device_printf(sc->ipmi_dev, "SMIC: Read did not start %02x\n",
error);
return (0);
}
*data = INB(sc, SMIC_DATA);
return (1);
}
/*
* Read a byte via a RD_NEXT transaction. If this was the last byte, return
* 2 rather than 1.
*/
static int
smic_read_byte(struct ipmi_softc *sc, u_char *data)
{
u_char error, status;
smic_wait_for_rx_okay(sc);
The IPMI spec is ambiguous (or rather, it contradicts itself) about whether or not the OS has to wait for RX_RDY or TX_RDY to be set before the OS sets the control code in the control/status register. Looking at the interface design, it seems that RX_RDY and TX_RDY are probably there to protect access to the data register and have nothing to do with the control/status register. Nevertheless, try to take what I think is the more conservative approach and always wait for the appropriate [TR]X_RDY flag to be set before writing any of the WR_NEXT, WR_END, RD_START, or RD_NEXT control codes to the control/status register.
2006-10-05 15:38:59 +00:00
OUTB(sc, SMIC_CTL_STS, SMIC_SC_SMS_RD_NEXT);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
smic_set_busy(sc);
smic_wait_for_not_busy(sc);
status = INB(sc, SMIC_CTL_STS);
if (status != SMIC_SC_SMS_RD_NEXT &&
status != SMIC_SC_SMS_RD_END) {
error = INB(sc, SMIC_DATA);
device_printf(sc->ipmi_dev, "SMIC: Read did not next %02x\n",
error);
return (0);
}
*data = INB(sc, SMIC_DATA);
if (status == SMIC_SC_SMS_RD_NEXT)
return (1);
else
return (2);
}
/* Complete a transfer via a RD_END transaction after reading the last byte. */
static int
smic_read_end(struct ipmi_softc *sc)
{
u_char error, status;
OUTB(sc, SMIC_CTL_STS, SMIC_CC_SMS_RD_END);
smic_set_busy(sc);
smic_wait_for_not_busy(sc);
status = INB(sc, SMIC_CTL_STS);
if (status != SMIC_SC_SMS_RDY) {
error = INB(sc, SMIC_DATA);
device_printf(sc->ipmi_dev, "SMIC: Read did not end %02x\n",
error);
return (0);
}
return (1);
}
static int
smic_polled_request(struct ipmi_softc *sc, struct ipmi_request *req)
{
u_char *cp, data;
int i, state;
/* First, start the message with the address. */
if (!smic_start_write(sc, req->ir_addr))
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: WRITE_START address: %02x\n",
req->ir_addr);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (req->ir_requestlen == 0) {
/* Send the command as the last byte. */
if (!smic_write_last(sc, req->ir_command))
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Wrote command: %02x\n",
req->ir_command);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
} else {
/* Send the command. */
if (!smic_write_next(sc, req->ir_command))
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Wrote command: %02x\n",
req->ir_command);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Send the payload. */
cp = req->ir_request;
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
for (i = 0; i < req->ir_requestlen - 1; i++) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (!smic_write_next(sc, *cp++))
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Wrote data: %02x\n",
cp[-1]);
#endif
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (!smic_write_last(sc, *cp))
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Write last data: %02x\n",
*cp);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
}
/* Start the read phase by reading the NetFn/LUN. */
if (smic_start_read(sc, &data) != 1)
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Read address: %02x\n", data);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (data != IPMI_REPLY_ADDR(req->ir_addr)) {
device_printf(sc->ipmi_dev, "SMIC: Reply address mismatch\n");
return (0);
}
/* Read the command. */
if (smic_read_byte(sc, &data) != 1)
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Read command: %02x\n", data);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (data != req->ir_command) {
device_printf(sc->ipmi_dev, "SMIC: Command mismatch\n");
return (0);
}
/* Read the completion code. */
state = smic_read_byte(sc, &req->ir_compcode);
if (state == 0)
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Read completion code: %02x\n",
req->ir_compcode);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
/* Finally, read the reply from the BMC. */
i = 0;
while (state == 1) {
state = smic_read_byte(sc, &data);
if (state == 0)
return (0);
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
if (i < req->ir_replybuflen) {
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
req->ir_reply[i] = data;
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: Read data: %02x\n",
data);
} else {
device_printf(sc->ipmi_dev,
"SMIC: Read short %02x byte %d\n", data, i + 1);
#endif
}
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
i++;
}
/* Terminate the transfer. */
if (!smic_read_end(sc))
return (0);
req->ir_replylen = i;
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: READ finished (%d bytes)\n", i);
if (req->ir_replybuflen < i)
#else
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
if (req->ir_replybuflen < i && req->ir_replybuflen != 0)
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
device_printf(sc->ipmi_dev,
"SMIC: Read short: %zd buffer, %d actual\n",
req->ir_replybuflen, i);
return (1);
}
static void
smic_loop(void *arg)
{
struct ipmi_softc *sc = arg;
struct ipmi_request *req;
int i, ok;
IPMI_LOCK(sc);
while ((req = ipmi_dequeue_request(sc)) != NULL) {
Unlock IPMI sc while performing requests via KCS and SMIC interfaces. It is already done in SSIF interface code. This reduces contention/spinning reported by many users. PR: kern/172166 Submitted by: Eric van Gyzen <eric at vangyzen.net> MFC after: 2 weeks
2013-03-25 14:30:34 +00:00
IPMI_UNLOCK(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ok = 0;
for (i = 0; i < 3 && !ok; i++)
ok = smic_polled_request(sc, req);
if (ok)
req->ir_error = 0;
else
req->ir_error = EIO;
Unlock IPMI sc while performing requests via KCS and SMIC interfaces. It is already done in SSIF interface code. This reduces contention/spinning reported by many users. PR: kern/172166 Submitted by: Eric van Gyzen <eric at vangyzen.net> MFC after: 2 weeks
2013-03-25 14:30:34 +00:00
IPMI_LOCK(sc);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
ipmi_complete_request(sc, req);
}
IPMI_UNLOCK(sc);
Rename the kthread_xxx (e.g. kthread_create()) calls to kproc_xxx as they actually make whole processes. Thos makes way for us to add REAL kthread_create() and friends that actually make theads. it turns out that most of these calls actually end up being moved back to the thread version when it's added. but we need to make this cosmetic change first. I'd LOVE to do this rename in 7.0 so that we can eventually MFC the new kthread_xxx() calls.
2007-10-20 23:23:23 +00:00
kproc_exit(0);
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
}
static int
smic_startup(struct ipmi_softc *sc)
{
Rename the kthread_xxx (e.g. kthread_create()) calls to kproc_xxx as they actually make whole processes. Thos makes way for us to add REAL kthread_create() and friends that actually make theads. it turns out that most of these calls actually end up being moved back to the thread version when it's added. but we need to make this cosmetic change first. I'd LOVE to do this rename in 7.0 so that we can eventually MFC the new kthread_xxx() calls.
2007-10-20 23:23:23 +00:00
return (kproc_create(smic_loop, sc, &sc->ipmi_kthread, 0, 0,
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
"%s: smic", device_get_nameunit(sc->ipmi_dev)));
}
int
ipmi_smic_attach(struct ipmi_softc *sc)
{
int flags;
/* Setup function pointers. */
sc->ipmi_startup = smic_startup;
sc->ipmi_enqueue_request = ipmi_polled_enqueue_request;
/* See if we can talk to the controller. */
flags = INB(sc, SMIC_FLAGS);
if (flags == 0xff) {
device_printf(sc->ipmi_dev, "couldn't find it\n");
return (ENXIO);
}
Add detailed debugging printf's for SMIC under SMIC_DEBUG.
2006-10-05 15:35:11 +00:00
#ifdef SMIC_DEBUG
device_printf(sc->ipmi_dev, "SMIC: initial state: %02x\n", flags);
#endif
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
return (0);
}
Reference in New Issue Copy Permalink