freebsd-nq/sys/compat/ndis/kern_ndis.c

1689 lines
36 KiB
C
Raw Normal View History

/*-
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
* Copyright (c) 2003
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/unistd.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/callout.h>
#include <sys/socket.h>
#include <sys/queue.h>
#include <sys/sysctl.h>
#include <sys/proc.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/kthread.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_ioctl.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#include <compat/ndis/pe_var.h>
#include <compat/ndis/resource_var.h>
#include <compat/ndis/ntoskrnl_var.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#include <compat/ndis/ndis_var.h>
#include <compat/ndis/hal_var.h>
#include <compat/ndis/cfg_var.h>
- Correct one aspect of the driver_object/device_object/IRP framework: when we create a PDO, the driver_object associated with it is that of the parent driver, not the driver we're trying to attach. For example, if we attach a PCI device, the PDO we pass to the NdisAddDevice() function should contain a pointer to fake_pci_driver, not to the NDIS driver itself. For PCI or PCMCIA devices this doesn't matter because the child never needs to talk to the parent bus driver, but for USB, the child needs to be able to send IRPs to the parent USB bus driver, and for that to work the parent USB bus driver has to be hung off the PDO. This involves modifying windrv_lookup() so that we can search for bus drivers by name, if necessary. Our fake bus drivers attach themselves as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them using those names. The individual attachment stubs now create and attach PDOs to the parent bus drivers instead of hanging them off the NDIS driver's object, and in if_ndis.c, we now search for the correct driver object depending on the bus type, and use that to find the correct PDO. With this fix, I can get my sample USB ethernet driver to deliver an IRP to my fake parent USB bus driver's dispatch routines. - Add stub modules for USB support: subr_usbd.c, usbd_var.h and if_ndis_usb.c. The subr_usbd.c module is hooked up the build but currently doesn't do very much. It provides the stub USB parent driver object and a dispatch routine for IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub compiles, but is not hooked up to the build yet. I'm putting these here so I can keep them under source code control as I flesh them out.
2005-02-24 21:49:14 +00:00
#include <compat/ndis/usbd_var.h>
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
#include <dev/if_ndis/if_ndisvar.h>
#define NDIS_DUMMY_PATH "\\\\some\\bogus\\path"
__stdcall static void ndis_status_func(ndis_handle, ndis_status,
void *, uint32_t);
__stdcall static void ndis_statusdone_func(ndis_handle);
__stdcall static void ndis_setdone_func(ndis_handle, ndis_status);
__stdcall static void ndis_getdone_func(ndis_handle, ndis_status);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
__stdcall static void ndis_resetdone_func(ndis_handle, ndis_status, uint8_t);
__stdcall static void ndis_sendrsrcavail_func(ndis_handle);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
static image_patch_table kernndis_functbl[] = {
IMPORT_FUNC(ndis_status_func),
IMPORT_FUNC(ndis_statusdone_func),
IMPORT_FUNC(ndis_setdone_func),
IMPORT_FUNC(ndis_getdone_func),
IMPORT_FUNC(ndis_resetdone_func),
IMPORT_FUNC(ndis_sendrsrcavail_func),
{ NULL, NULL, NULL }
};
struct nd_head ndis_devhead;
struct ndis_req {
void (*nr_func)(void *);
void *nr_arg;
int nr_exit;
STAILQ_ENTRY(ndis_req) link;
};
struct ndisproc {
struct ndisqhead *np_q;
struct proc *np_p;
int np_state;
};
static void ndis_return(void *);
static int ndis_create_kthreads(void);
static void ndis_destroy_kthreads(void);
static void ndis_stop_thread(int);
static int ndis_enlarge_thrqueue(int);
static int ndis_shrink_thrqueue(int);
static void ndis_runq(void *);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
struct mtx ndis_thr_mtx;
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
struct mtx ndis_req_mtx;
static STAILQ_HEAD(ndisqhead, ndis_req) ndis_ttodo;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
static struct ndisqhead ndis_itodo;
static struct ndisqhead ndis_free;
static int ndis_jobs = 32;
static struct ndisproc ndis_tproc;
static struct ndisproc ndis_iproc;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/*
* This allows us to export our symbols to other modules.
* Note that we call ourselves 'ndisapi' to avoid a namespace
* collision with if_ndis.ko, which internally calls itself
* 'ndis.'
*/
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
static int
ndis_modevent(module_t mod, int cmd, void *arg)
{
int error = 0;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
image_patch_table *patch;
switch (cmd) {
case MOD_LOAD:
/* Initialize subsystems */
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
windrv_libinit();
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
hal_libinit();
ndis_libinit();
ntoskrnl_libinit();
- Correct one aspect of the driver_object/device_object/IRP framework: when we create a PDO, the driver_object associated with it is that of the parent driver, not the driver we're trying to attach. For example, if we attach a PCI device, the PDO we pass to the NdisAddDevice() function should contain a pointer to fake_pci_driver, not to the NDIS driver itself. For PCI or PCMCIA devices this doesn't matter because the child never needs to talk to the parent bus driver, but for USB, the child needs to be able to send IRPs to the parent USB bus driver, and for that to work the parent USB bus driver has to be hung off the PDO. This involves modifying windrv_lookup() so that we can search for bus drivers by name, if necessary. Our fake bus drivers attach themselves as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them using those names. The individual attachment stubs now create and attach PDOs to the parent bus drivers instead of hanging them off the NDIS driver's object, and in if_ndis.c, we now search for the correct driver object depending on the bus type, and use that to find the correct PDO. With this fix, I can get my sample USB ethernet driver to deliver an IRP to my fake parent USB bus driver's dispatch routines. - Add stub modules for USB support: subr_usbd.c, usbd_var.h and if_ndis_usb.c. The subr_usbd.c module is hooked up the build but currently doesn't do very much. It provides the stub USB parent driver object and a dispatch routine for IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub compiles, but is not hooked up to the build yet. I'm putting these here so I can keep them under source code control as I flesh them out.
2005-02-24 21:49:14 +00:00
usbd_libinit();
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
patch = kernndis_functbl;
while (patch->ipt_func != NULL) {
windrv_wrap((funcptr)patch->ipt_func,
(funcptr *)&patch->ipt_wrap);
patch++;
}
ndis_create_kthreads();
TAILQ_INIT(&ndis_devhead);
break;
case MOD_SHUTDOWN:
/* stop kthreads */
ndis_destroy_kthreads();
if (TAILQ_FIRST(&ndis_devhead) == NULL) {
/* Shut down subsystems */
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
hal_libfini();
ndis_libfini();
ntoskrnl_libfini();
- Correct one aspect of the driver_object/device_object/IRP framework: when we create a PDO, the driver_object associated with it is that of the parent driver, not the driver we're trying to attach. For example, if we attach a PCI device, the PDO we pass to the NdisAddDevice() function should contain a pointer to fake_pci_driver, not to the NDIS driver itself. For PCI or PCMCIA devices this doesn't matter because the child never needs to talk to the parent bus driver, but for USB, the child needs to be able to send IRPs to the parent USB bus driver, and for that to work the parent USB bus driver has to be hung off the PDO. This involves modifying windrv_lookup() so that we can search for bus drivers by name, if necessary. Our fake bus drivers attach themselves as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them using those names. The individual attachment stubs now create and attach PDOs to the parent bus drivers instead of hanging them off the NDIS driver's object, and in if_ndis.c, we now search for the correct driver object depending on the bus type, and use that to find the correct PDO. With this fix, I can get my sample USB ethernet driver to deliver an IRP to my fake parent USB bus driver's dispatch routines. - Add stub modules for USB support: subr_usbd.c, usbd_var.h and if_ndis_usb.c. The subr_usbd.c module is hooked up the build but currently doesn't do very much. It provides the stub USB parent driver object and a dispatch routine for IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub compiles, but is not hooked up to the build yet. I'm putting these here so I can keep them under source code control as I flesh them out.
2005-02-24 21:49:14 +00:00
usbd_libfini();
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
windrv_libfini();
patch = kernndis_functbl;
while (patch->ipt_func != NULL) {
windrv_unwrap(patch->ipt_wrap);
patch++;
}
}
break;
case MOD_UNLOAD:
/* stop kthreads */
ndis_destroy_kthreads();
/* Shut down subsystems */
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
hal_libfini();
ndis_libfini();
ntoskrnl_libfini();
- Correct one aspect of the driver_object/device_object/IRP framework: when we create a PDO, the driver_object associated with it is that of the parent driver, not the driver we're trying to attach. For example, if we attach a PCI device, the PDO we pass to the NdisAddDevice() function should contain a pointer to fake_pci_driver, not to the NDIS driver itself. For PCI or PCMCIA devices this doesn't matter because the child never needs to talk to the parent bus driver, but for USB, the child needs to be able to send IRPs to the parent USB bus driver, and for that to work the parent USB bus driver has to be hung off the PDO. This involves modifying windrv_lookup() so that we can search for bus drivers by name, if necessary. Our fake bus drivers attach themselves as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them using those names. The individual attachment stubs now create and attach PDOs to the parent bus drivers instead of hanging them off the NDIS driver's object, and in if_ndis.c, we now search for the correct driver object depending on the bus type, and use that to find the correct PDO. With this fix, I can get my sample USB ethernet driver to deliver an IRP to my fake parent USB bus driver's dispatch routines. - Add stub modules for USB support: subr_usbd.c, usbd_var.h and if_ndis_usb.c. The subr_usbd.c module is hooked up the build but currently doesn't do very much. It provides the stub USB parent driver object and a dispatch routine for IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub compiles, but is not hooked up to the build yet. I'm putting these here so I can keep them under source code control as I flesh them out.
2005-02-24 21:49:14 +00:00
usbd_libfini();
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
windrv_libfini();
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
patch = kernndis_functbl;
while (patch->ipt_func != NULL) {
windrv_unwrap(patch->ipt_wrap);
patch++;
}
break;
default:
error = EINVAL;
break;
}
return(error);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
DEV_MODULE(ndisapi, ndis_modevent, NULL);
MODULE_VERSION(ndisapi, 1);
/*
* We create two kthreads for the NDIS subsystem. One of them is a task
* queue for performing various odd jobs. The other is an swi thread
* reserved exclusively for running interrupt handlers. The reason we
* have our own task queue is that there are some cases where we may
* need to sleep for a significant amount of time, and if we were to
* use one of the taskqueue threads, we might delay the processing
* of other pending tasks which might need to run right away. We have
* a separate swi thread because we don't want our interrupt handling
* to be delayed either.
*
* By default there are 32 jobs available to start, and another 8
* are added to the free list each time a new device is created.
*/
static void
ndis_runq(arg)
void *arg;
{
struct ndis_req *r = NULL, *die = NULL;
struct ndisproc *p;
p = arg;
while (1) {
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
/* Sleep, but preserve our original priority. */
ndis_thsuspend(p->np_p, 0);
/* Look for any jobs on the work queue. */
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
p->np_state = NDIS_PSTATE_RUNNING;
while(STAILQ_FIRST(p->np_q) != NULL) {
r = STAILQ_FIRST(p->np_q);
STAILQ_REMOVE_HEAD(p->np_q, link);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
/* Do the work. */
if (r->nr_func != NULL)
(*r->nr_func)(r->nr_arg);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
STAILQ_INSERT_HEAD(&ndis_free, r, link);
/* Check for a shutdown request */
if (r->nr_exit == TRUE)
die = r;
}
p->np_state = NDIS_PSTATE_SLEEPING;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
/* Bail if we were told to shut down. */
if (die != NULL)
break;
}
wakeup(die);
#if __FreeBSD_version < 502113
mtx_lock(&Giant);
#endif
kthread_exit(0);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
return; /* notreached */
}
static int
ndis_create_kthreads()
{
struct ndis_req *r;
int i, error = 0;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_init(&ndis_thr_mtx, "NDIS thread lock",
MTX_NDIS_LOCK, MTX_DEF);
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
mtx_init(&ndis_req_mtx, "NDIS request lock",
MTX_NDIS_LOCK, MTX_DEF);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
STAILQ_INIT(&ndis_ttodo);
STAILQ_INIT(&ndis_itodo);
STAILQ_INIT(&ndis_free);
for (i = 0; i < ndis_jobs; i++) {
r = malloc(sizeof(struct ndis_req), M_DEVBUF, M_WAITOK);
if (r == NULL) {
error = ENOMEM;
break;
}
STAILQ_INSERT_HEAD(&ndis_free, r, link);
}
if (error == 0) {
ndis_tproc.np_q = &ndis_ttodo;
ndis_tproc.np_state = NDIS_PSTATE_SLEEPING;
error = kthread_create(ndis_runq, &ndis_tproc,
&ndis_tproc.np_p, RFHIGHPID,
NDIS_KSTACK_PAGES, "ndis taskqueue");
}
if (error == 0) {
ndis_iproc.np_q = &ndis_itodo;
ndis_iproc.np_state = NDIS_PSTATE_SLEEPING;
error = kthread_create(ndis_runq, &ndis_iproc,
&ndis_iproc.np_p, RFHIGHPID,
NDIS_KSTACK_PAGES, "ndis swi");
}
if (error) {
while ((r = STAILQ_FIRST(&ndis_free)) != NULL) {
STAILQ_REMOVE_HEAD(&ndis_free, link);
free(r, M_DEVBUF);
}
return(error);
}
return(0);
}
static void
ndis_destroy_kthreads()
{
struct ndis_req *r;
/* Stop the threads. */
ndis_stop_thread(NDIS_TASKQUEUE);
ndis_stop_thread(NDIS_SWI);
/* Destroy request structures. */
while ((r = STAILQ_FIRST(&ndis_free)) != NULL) {
STAILQ_REMOVE_HEAD(&ndis_free, link);
free(r, M_DEVBUF);
}
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
mtx_destroy(&ndis_req_mtx);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_destroy(&ndis_thr_mtx);
return;
}
static void
ndis_stop_thread(t)
int t;
{
struct ndis_req *r;
struct ndisqhead *q;
struct proc *p;
if (t == NDIS_TASKQUEUE) {
q = &ndis_ttodo;
p = ndis_tproc.np_p;
} else {
q = &ndis_itodo;
p = ndis_iproc.np_p;
}
/* Create and post a special 'exit' job. */
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
r = STAILQ_FIRST(&ndis_free);
STAILQ_REMOVE_HEAD(&ndis_free, link);
r->nr_func = NULL;
r->nr_arg = NULL;
r->nr_exit = TRUE;
STAILQ_INSERT_TAIL(q, r, link);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
ndis_thresume(p);
/* wait for thread exit */
tsleep(r, curthread->td_priority|PCATCH, "ndisthexit", hz * 60);
/* Now empty the job list. */
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
while ((r = STAILQ_FIRST(q)) != NULL) {
STAILQ_REMOVE_HEAD(q, link);
STAILQ_INSERT_HEAD(&ndis_free, r, link);
}
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
return;
}
static int
ndis_enlarge_thrqueue(cnt)
int cnt;
{
struct ndis_req *r;
int i;
for (i = 0; i < cnt; i++) {
r = malloc(sizeof(struct ndis_req), M_DEVBUF, M_WAITOK);
if (r == NULL)
return(ENOMEM);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
STAILQ_INSERT_HEAD(&ndis_free, r, link);
ndis_jobs++;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
}
return(0);
}
static int
ndis_shrink_thrqueue(cnt)
int cnt;
{
struct ndis_req *r;
int i;
for (i = 0; i < cnt; i++) {
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
r = STAILQ_FIRST(&ndis_free);
if (r == NULL) {
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
return(ENOMEM);
}
STAILQ_REMOVE_HEAD(&ndis_free, link);
ndis_jobs--;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
free(r, M_DEVBUF);
}
return(0);
}
int
ndis_unsched(func, arg, t)
void (*func)(void *);
void *arg;
int t;
{
struct ndis_req *r;
struct ndisqhead *q;
struct proc *p;
if (t == NDIS_TASKQUEUE) {
q = &ndis_ttodo;
p = ndis_tproc.np_p;
} else {
q = &ndis_itodo;
p = ndis_iproc.np_p;
}
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
STAILQ_FOREACH(r, q, link) {
if (r->nr_func == func && r->nr_arg == arg) {
STAILQ_REMOVE(q, r, ndis_req, link);
STAILQ_INSERT_HEAD(&ndis_free, r, link);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
return(0);
}
}
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
return(ENOENT);
}
int
ndis_sched(func, arg, t)
void (*func)(void *);
void *arg;
int t;
{
struct ndis_req *r;
struct ndisqhead *q;
struct proc *p;
int s;
if (t == NDIS_TASKQUEUE) {
q = &ndis_ttodo;
p = ndis_tproc.np_p;
} else {
q = &ndis_itodo;
p = ndis_iproc.np_p;
}
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_lock(&ndis_thr_mtx);
/*
* Check to see if an instance of this job is already
* pending. If so, don't bother queuing it again.
*/
STAILQ_FOREACH(r, q, link) {
if (r->nr_func == func && r->nr_arg == arg) {
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
return(0);
}
}
r = STAILQ_FIRST(&ndis_free);
if (r == NULL) {
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
return(EAGAIN);
}
STAILQ_REMOVE_HEAD(&ndis_free, link);
r->nr_func = func;
r->nr_arg = arg;
r->nr_exit = FALSE;
STAILQ_INSERT_TAIL(q, r, link);
if (t == NDIS_TASKQUEUE)
s = ndis_tproc.np_state;
else
s = ndis_iproc.np_state;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
mtx_unlock(&ndis_thr_mtx);
/*
* Post the job, but only if the thread is actually blocked
* on its own suspend call. If a driver queues up a job with
* NdisScheduleWorkItem() which happens to do a KeWaitForObject(),
* it may suspend there, and in that case we don't want to wake
* it up until KeWaitForObject() gets woken up on its own.
*/
if (s == NDIS_PSTATE_SLEEPING)
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
ndis_thresume(p);
return(0);
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
int
ndis_thsuspend(p, timo)
struct proc *p;
int timo;
{
int error;
PROC_LOCK(p);
error = msleep(&p->p_siglist, &p->p_mtx,
curthread->td_priority|PDROP, "ndissp", timo);
return(error);
}
void
ndis_thresume(p)
struct proc *p;
{
wakeup(&p->p_siglist);
return;
}
__stdcall static void
ndis_sendrsrcavail_func(adapter)
ndis_handle adapter;
{
return;
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
__stdcall static void
ndis_status_func(adapter, status, sbuf, slen)
ndis_handle adapter;
ndis_status status;
void *sbuf;
uint32_t slen;
{
ndis_miniport_block *block;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
struct ndis_softc *sc;
struct ifnet *ifp;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
block = adapter;
sc = device_get_softc(block->nmb_physdeviceobj->do_devext);
ifp = &sc->arpcom.ac_if;
if (ifp->if_flags & IFF_DEBUG)
device_printf (sc->ndis_dev, "status: %x\n", status);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
}
__stdcall static void
ndis_statusdone_func(adapter)
ndis_handle adapter;
{
ndis_miniport_block *block;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
struct ndis_softc *sc;
struct ifnet *ifp;
block = adapter;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
sc = device_get_softc(block->nmb_physdeviceobj->do_devext);
ifp = &sc->arpcom.ac_if;
if (ifp->if_flags & IFF_DEBUG)
device_printf (sc->ndis_dev, "status complete\n");
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
}
__stdcall static void
ndis_setdone_func(adapter, status)
ndis_handle adapter;
ndis_status status;
{
ndis_miniport_block *block;
block = adapter;
block->nmb_setstat = status;
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
wakeup(&block->nmb_setstat);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
}
__stdcall static void
ndis_getdone_func(adapter, status)
ndis_handle adapter;
ndis_status status;
{
ndis_miniport_block *block;
block = adapter;
block->nmb_getstat = status;
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
wakeup(&block->nmb_getstat);
return;
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
__stdcall static void
ndis_resetdone_func(adapter, status, addressingreset)
ndis_handle adapter;
ndis_status status;
uint8_t addressingreset;
{
ndis_miniport_block *block;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
struct ndis_softc *sc;
struct ifnet *ifp;
block = adapter;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
sc = device_get_softc(block->nmb_physdeviceobj->do_devext);
ifp = &sc->arpcom.ac_if;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
if (ifp->if_flags & IFF_DEBUG)
device_printf (sc->ndis_dev, "reset done...\n");
wakeup(ifp);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
}
int
ndis_create_sysctls(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_cfg *vals;
char buf[256];
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
struct sysctl_oid *oidp;
struct sysctl_ctx_entry *e;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (arg == NULL)
return(EINVAL);
sc = arg;
vals = sc->ndis_regvals;
TAILQ_INIT(&sc->ndis_cfglist_head);
#if __FreeBSD_version < 502113
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/* Create the sysctl tree. */
sc->ndis_tree = SYSCTL_ADD_NODE(&sc->ndis_ctx,
SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO,
device_get_nameunit(sc->ndis_dev), CTLFLAG_RD, 0,
device_get_desc(sc->ndis_dev));
#endif
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/* Add the driver-specific registry keys. */
vals = sc->ndis_regvals;
while(1) {
if (vals->nc_cfgkey == NULL)
break;
if (vals->nc_idx != sc->ndis_devidx) {
vals++;
continue;
}
Big mess 'o changes: - Give ndiscvt(8) the ability to process a .SYS file directly into a .o file so that we don't have to emit big messy char arrays into the ndis_driver_data.h file. This behavior is currently optional, but may become the default some day. - Give ndiscvt(8) the ability to turn arbitrary files into .ko files so that they can be pre-loaded or kldloaded. (Both this and the previous change involve using objcopy(1)). - Give NdisOpenFile() the ability to 'read' files out of kernel memory that have been kldloaded or pre-loaded, and disallow the use of the normal vn_open() file opening method during bootstrap (when no filesystems have been mounted yet). Some people have reported that kldloading if_ndis.ko works fine when the system is running multiuser but causes a panic when the modile is pre-loaded by /boot/loader. This happens with drivers that need to use NdisOpenFile() to access external files (i.e. firmware images). NdisOpenFile() won't work during kernel bootstrapping because no filesystems have been mounted. To get around this, you can now do the following: o Say you have a firmware file called firmware.img o Do: ndiscvt -f firmware.img -- this creates firmware.img.ko o Put the firmware.img.ko in /boot/kernel o add firmware.img_load="YES" in /boot/loader.conf o add if_ndis_load="YES" and ndis_load="YES" as well Now the loader will suck the additional file into memory as a .ko. The phony .ko has two symbols in it: filename_start and filename_end, which are generated by objcopy(1). ndis_open_file() will traverse each module in the module list looking for these symbols and, if it finds them, it'll use them to generate the file mapping address and length values that the caller of NdisOpenFile() wants. As a bonus, this will even work if the file has been statically linked into the kernel itself, since the "kernel" module is searched too. (ndiscvt(8) will generate both filename.o and filename.ko for you). - Modify the mechanism used to provide make-pretend FASTCALL support. Rather than using inline assembly to yank the first two arguments out of %ecx and %edx, we now use the __regparm__(3) attribute (and the __stdcall__ attribute) and use some macro magic to re-order the arguments and provide dummy arguments as needed so that the arguments passed in registers end up in the right place. Change taken from DragonflyBSD version of the NDISulator.
2004-08-01 20:04:31 +00:00
/* See if we already have a sysctl with this name */
oidp = NULL;
#if __FreeBSD_version < 502113
TAILQ_FOREACH(e, &sc->ndis_ctx, link) {
#else
TAILQ_FOREACH(e, device_get_sysctl_ctx(sc->ndis_dev), link) {
#endif
oidp = e->entry;
if (ndis_strcasecmp(oidp->oid_name,
vals->nc_cfgkey) == 0)
break;
oidp = NULL;
}
if (oidp != NULL) {
vals++;
continue;
}
#if __FreeBSD_version < 502113
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
SYSCTL_ADD_STRING(&sc->ndis_ctx,
SYSCTL_CHILDREN(sc->ndis_tree),
#else
SYSCTL_ADD_STRING(device_get_sysctl_ctx(sc->ndis_dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(sc->ndis_dev)),
#endif
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
OID_AUTO, vals->nc_cfgkey,
CTLFLAG_RW, vals->nc_val,
sizeof(vals->nc_val),
vals->nc_cfgdesc);
vals++;
}
/* Now add a couple of builtin keys. */
/*
* Environment can be either Windows (0) or WindowsNT (1).
* We qualify as the latter.
*/
ndis_add_sysctl(sc, "Environment",
"Windows environment", "1", CTLFLAG_RD);
/* NDIS version should be 5.1. */
ndis_add_sysctl(sc, "NdisVersion",
"NDIS API Version", "0x00050001", CTLFLAG_RD);
/* Bus type (PCI, PCMCIA, etc...) */
sprintf(buf, "%d", (int)sc->ndis_iftype);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
ndis_add_sysctl(sc, "BusType", "Bus Type", buf, CTLFLAG_RD);
if (sc->ndis_res_io != NULL) {
sprintf(buf, "0x%lx", rman_get_start(sc->ndis_res_io));
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
ndis_add_sysctl(sc, "IOBaseAddress",
"Base I/O Address", buf, CTLFLAG_RD);
}
if (sc->ndis_irq != NULL) {
sprintf(buf, "%lu", rman_get_start(sc->ndis_irq));
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
ndis_add_sysctl(sc, "InterruptNumber",
"Interrupt Number", buf, CTLFLAG_RD);
}
return(0);
}
int
ndis_add_sysctl(arg, key, desc, val, flag)
void *arg;
char *key;
char *desc;
char *val;
int flag;
{
struct ndis_softc *sc;
struct ndis_cfglist *cfg;
char descstr[256];
sc = arg;
cfg = malloc(sizeof(struct ndis_cfglist), M_DEVBUF, M_NOWAIT|M_ZERO);
if (cfg == NULL)
return(ENOMEM);
cfg->ndis_cfg.nc_cfgkey = strdup(key, M_DEVBUF);
if (desc == NULL) {
snprintf(descstr, sizeof(descstr), "%s (dynamic)", key);
cfg->ndis_cfg.nc_cfgdesc = strdup(descstr, M_DEVBUF);
} else
cfg->ndis_cfg.nc_cfgdesc = strdup(desc, M_DEVBUF);
strcpy(cfg->ndis_cfg.nc_val, val);
TAILQ_INSERT_TAIL(&sc->ndis_cfglist_head, cfg, link);
#if __FreeBSD_version < 502113
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
SYSCTL_ADD_STRING(&sc->ndis_ctx, SYSCTL_CHILDREN(sc->ndis_tree),
#else
SYSCTL_ADD_STRING(device_get_sysctl_ctx(sc->ndis_dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(sc->ndis_dev)),
#endif
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
OID_AUTO, cfg->ndis_cfg.nc_cfgkey, flag,
cfg->ndis_cfg.nc_val, sizeof(cfg->ndis_cfg.nc_val),
cfg->ndis_cfg.nc_cfgdesc);
return(0);
}
int
ndis_flush_sysctls(arg)
void *arg;
{
struct ndis_softc *sc;
struct ndis_cfglist *cfg;
sc = arg;
while (!TAILQ_EMPTY(&sc->ndis_cfglist_head)) {
cfg = TAILQ_FIRST(&sc->ndis_cfglist_head);
TAILQ_REMOVE(&sc->ndis_cfglist_head, cfg, link);
free(cfg->ndis_cfg.nc_cfgkey, M_DEVBUF);
free(cfg->ndis_cfg.nc_cfgdesc, M_DEVBUF);
free(cfg, M_DEVBUF);
}
return(0);
}
static void
ndis_return(arg)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
void *arg;
{
struct ndis_softc *sc;
__stdcall ndis_return_handler returnfunc;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
ndis_handle adapter;
ndis_packet *p;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t irql;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
p = arg;
sc = p->np_softc;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
if (adapter == NULL)
return;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
returnfunc = sc->ndis_chars->nmc_return_packet_func;
irql = KeRaiseIrql(DISPATCH_LEVEL);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL2(returnfunc, adapter, p);
KeLowerIrql(irql);
return;
}
void
ndis_return_packet(buf, arg)
void *buf; /* not used */
void *arg;
{
ndis_packet *p;
if (arg == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
p = arg;
/* Decrement refcount. */
p->np_refcnt--;
/* Release packet when refcount hits zero, otherwise return. */
if (p->np_refcnt)
return;
ndis_sched(ndis_return, p, NDIS_SWI);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
}
void
ndis_free_bufs(b0)
ndis_buffer *b0;
{
ndis_buffer *next;
if (b0 == NULL)
return;
while(b0 != NULL) {
next = b0->mdl_next;
IoFreeMdl(b0);
b0 = next;
}
return;
}
void
ndis_free_packet(p)
ndis_packet *p;
{
if (p == NULL)
return;
ndis_free_bufs(p->np_private.npp_head);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
NdisFreePacket(p);
return;
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
int
ndis_convert_res(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_resource_list *rl = NULL;
cm_partial_resource_desc *prd = NULL;
ndis_miniport_block *block;
device_t dev;
struct resource_list *brl;
- In subr_ndis.c:ndis_init_event(), initialize events as notification objects rather than synchronization objects. When a sync object is signaled, only the first thread waiting on it is woken up, and then it's automatically reset to the not-signaled state. When a notification object is signaled, all threads waiting on it will be woken up, and it remains in the signaled state until someone resets it manually. We want the latter behavior for NDIS events. - In kern_ndis.c:ndis_convert_res(), we have to create a temporary copy of the list returned by BUS_GET_RESOURCE_LIST(). When the PCI bus code probes resources for a given device, it enters them into a singly linked list, head first. The result is that traversing this list gives you the resources in reverse order. This means when we create the Windows resource list, it will be in reverse order too. Unfortunately, this can hose drivers for devices with multiple I/O ranges of the same type, like, say, two memory mapped I/O regions (one for registers, one to map the NVRAM/bootrom/whatever). Some drivers test the range size to figure out which region is which, but others just assume that the resources will be listed in ascending order from lowest numbered BAR to highest. Reversing the order means such drivers will choose the wrong resource as their I/O register range. Since we can't traverse the resource SLIST backwards, we have to make a temporary copy of the list in the right order and then build the Windows resource list from that. I suppose we could just fix the PCI bus code to use a TAILQ instead, but then I'd have to track down all the consumers of the BUS_GET_RESOURCE_LIST() and fix them too.
2004-03-25 18:31:52 +00:00
struct resource_list brl_rev;
struct resource_list_entry *brle, *n;
int error = 0;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
sc = arg;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
block = sc->ndis_block;
dev = sc->ndis_dev;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
SLIST_INIT(&brl_rev);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
rl = malloc(sizeof(ndis_resource_list) +
(sizeof(cm_partial_resource_desc) * (sc->ndis_rescnt - 1)),
M_DEVBUF, M_NOWAIT|M_ZERO);
if (rl == NULL)
return(ENOMEM);
rl->cprl_version = 5;
rl->cprl_version = 1;
rl->cprl_count = sc->ndis_rescnt;
prd = rl->cprl_partial_descs;
brl = BUS_GET_RESOURCE_LIST(dev, dev);
if (brl != NULL) {
- In subr_ndis.c:ndis_init_event(), initialize events as notification objects rather than synchronization objects. When a sync object is signaled, only the first thread waiting on it is woken up, and then it's automatically reset to the not-signaled state. When a notification object is signaled, all threads waiting on it will be woken up, and it remains in the signaled state until someone resets it manually. We want the latter behavior for NDIS events. - In kern_ndis.c:ndis_convert_res(), we have to create a temporary copy of the list returned by BUS_GET_RESOURCE_LIST(). When the PCI bus code probes resources for a given device, it enters them into a singly linked list, head first. The result is that traversing this list gives you the resources in reverse order. This means when we create the Windows resource list, it will be in reverse order too. Unfortunately, this can hose drivers for devices with multiple I/O ranges of the same type, like, say, two memory mapped I/O regions (one for registers, one to map the NVRAM/bootrom/whatever). Some drivers test the range size to figure out which region is which, but others just assume that the resources will be listed in ascending order from lowest numbered BAR to highest. Reversing the order means such drivers will choose the wrong resource as their I/O register range. Since we can't traverse the resource SLIST backwards, we have to make a temporary copy of the list in the right order and then build the Windows resource list from that. I suppose we could just fix the PCI bus code to use a TAILQ instead, but then I'd have to track down all the consumers of the BUS_GET_RESOURCE_LIST() and fix them too.
2004-03-25 18:31:52 +00:00
/*
* We have a small problem. Some PCI devices have
* multiple I/O ranges. Windows orders them starting
* from lowest numbered BAR to highest. We discover
* them in that order too, but insert them into a singly
* linked list head first, which means when time comes
* to traverse the list, we enumerate them in reverse
* order. This screws up some drivers which expect the
* BARs to be in ascending order so that they can choose
* the "first" one as their register space. Unfortunately,
* in order to fix this, we have to create our own
* temporary list with the entries in reverse order.
*/
SLIST_FOREACH(brle, brl, link) {
- In subr_ndis.c:ndis_init_event(), initialize events as notification objects rather than synchronization objects. When a sync object is signaled, only the first thread waiting on it is woken up, and then it's automatically reset to the not-signaled state. When a notification object is signaled, all threads waiting on it will be woken up, and it remains in the signaled state until someone resets it manually. We want the latter behavior for NDIS events. - In kern_ndis.c:ndis_convert_res(), we have to create a temporary copy of the list returned by BUS_GET_RESOURCE_LIST(). When the PCI bus code probes resources for a given device, it enters them into a singly linked list, head first. The result is that traversing this list gives you the resources in reverse order. This means when we create the Windows resource list, it will be in reverse order too. Unfortunately, this can hose drivers for devices with multiple I/O ranges of the same type, like, say, two memory mapped I/O regions (one for registers, one to map the NVRAM/bootrom/whatever). Some drivers test the range size to figure out which region is which, but others just assume that the resources will be listed in ascending order from lowest numbered BAR to highest. Reversing the order means such drivers will choose the wrong resource as their I/O register range. Since we can't traverse the resource SLIST backwards, we have to make a temporary copy of the list in the right order and then build the Windows resource list from that. I suppose we could just fix the PCI bus code to use a TAILQ instead, but then I'd have to track down all the consumers of the BUS_GET_RESOURCE_LIST() and fix them too.
2004-03-25 18:31:52 +00:00
n = malloc(sizeof(struct resource_list_entry),
M_TEMP, M_NOWAIT);
if (n == NULL) {
error = ENOMEM;
goto bad;
}
bcopy((char *)brle, (char *)n,
sizeof(struct resource_list_entry));
SLIST_INSERT_HEAD(&brl_rev, n, link);
}
SLIST_FOREACH(brle, &brl_rev, link) {
switch (brle->type) {
case SYS_RES_IOPORT:
prd->cprd_type = CmResourceTypePort;
prd->cprd_flags = CM_RESOURCE_PORT_IO;
prd->cprd_sharedisp =
CmResourceShareDeviceExclusive;
prd->u.cprd_port.cprd_start.np_quad =
brle->start;
prd->u.cprd_port.cprd_len = brle->count;
break;
case SYS_RES_MEMORY:
prd->cprd_type = CmResourceTypeMemory;
prd->cprd_flags =
CM_RESOURCE_MEMORY_READ_WRITE;
prd->cprd_sharedisp =
CmResourceShareDeviceExclusive;
prd->u.cprd_port.cprd_start.np_quad =
brle->start;
prd->u.cprd_port.cprd_len = brle->count;
break;
case SYS_RES_IRQ:
prd->cprd_type = CmResourceTypeInterrupt;
prd->cprd_flags = 0;
prd->cprd_sharedisp =
CmResourceShareDeviceExclusive;
prd->u.cprd_intr.cprd_level = brle->start;
prd->u.cprd_intr.cprd_vector = brle->start;
prd->u.cprd_intr.cprd_affinity = 0;
break;
default:
break;
}
prd++;
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
block->nmb_rlist = rl;
- In subr_ndis.c:ndis_init_event(), initialize events as notification objects rather than synchronization objects. When a sync object is signaled, only the first thread waiting on it is woken up, and then it's automatically reset to the not-signaled state. When a notification object is signaled, all threads waiting on it will be woken up, and it remains in the signaled state until someone resets it manually. We want the latter behavior for NDIS events. - In kern_ndis.c:ndis_convert_res(), we have to create a temporary copy of the list returned by BUS_GET_RESOURCE_LIST(). When the PCI bus code probes resources for a given device, it enters them into a singly linked list, head first. The result is that traversing this list gives you the resources in reverse order. This means when we create the Windows resource list, it will be in reverse order too. Unfortunately, this can hose drivers for devices with multiple I/O ranges of the same type, like, say, two memory mapped I/O regions (one for registers, one to map the NVRAM/bootrom/whatever). Some drivers test the range size to figure out which region is which, but others just assume that the resources will be listed in ascending order from lowest numbered BAR to highest. Reversing the order means such drivers will choose the wrong resource as their I/O register range. Since we can't traverse the resource SLIST backwards, we have to make a temporary copy of the list in the right order and then build the Windows resource list from that. I suppose we could just fix the PCI bus code to use a TAILQ instead, but then I'd have to track down all the consumers of the BUS_GET_RESOURCE_LIST() and fix them too.
2004-03-25 18:31:52 +00:00
bad:
while (!SLIST_EMPTY(&brl_rev)) {
n = SLIST_FIRST(&brl_rev);
SLIST_REMOVE_HEAD(&brl_rev, link);
free (n, M_TEMP);
}
return(error);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
}
/*
* Map an NDIS packet to an mbuf list. When an NDIS driver receives a
* packet, it will hand it to us in the form of an ndis_packet,
* which we need to convert to an mbuf that is then handed off
* to the stack. Note: we configure the mbuf list so that it uses
* the memory regions specified by the ndis_buffer structures in
* the ndis_packet as external storage. In most cases, this will
* point to a memory region allocated by the driver (either by
* ndis_malloc_withtag() or ndis_alloc_sharedmem()). We expect
* the driver to handle free()ing this region for is, so we set up
* a dummy no-op free handler for it.
*/
int
ndis_ptom(m0, p)
struct mbuf **m0;
ndis_packet *p;
{
struct mbuf *m, *prev = NULL;
ndis_buffer *buf;
ndis_packet_private *priv;
uint32_t totlen = 0;
if (p == NULL || m0 == NULL)
return(EINVAL);
priv = &p->np_private;
buf = priv->npp_head;
p->np_refcnt = 0;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
for (buf = priv->npp_head; buf != NULL; buf = buf->mdl_next) {
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (buf == priv->npp_head)
MGETHDR(m, M_DONTWAIT, MT_HEADER);
else
MGET(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
m_freem(*m0);
*m0 = NULL;
return(ENOBUFS);
}
m->m_len = MmGetMdlByteCount(buf);
m->m_data = MmGetMdlVirtualAddress(buf);
MEXTADD(m, m->m_data, m->m_len, ndis_return_packet,
p, 0, EXT_NDIS);
p->np_refcnt++;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
totlen += m->m_len;
if (m->m_flags & MT_HEADER)
*m0 = m;
else
prev->m_next = m;
prev = m;
}
(*m0)->m_pkthdr.len = totlen;
return(0);
}
/*
* Create an mbuf chain from an NDIS packet chain.
* This is used mainly when transmitting packets, where we need
* to turn an mbuf off an interface's send queue and transform it
* into an NDIS packet which will be fed into the NDIS driver's
* send routine.
*
* NDIS packets consist of two parts: an ndis_packet structure,
* which is vaguely analagous to the pkthdr portion of an mbuf,
* and one or more ndis_buffer structures, which define the
* actual memory segments in which the packet data resides.
* We need to allocate one ndis_buffer for each mbuf in a chain,
* plus one ndis_packet as the header.
*/
int
ndis_mtop(m0, p)
struct mbuf *m0;
ndis_packet **p;
{
struct mbuf *m;
ndis_buffer *buf = NULL, *prev = NULL;
ndis_packet_private *priv;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
if (p == NULL || *p == NULL || m0 == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EINVAL);
priv = &(*p)->np_private;
priv->npp_totlen = m0->m_pkthdr.len;
for (m = m0; m != NULL; m = m->m_next) {
2003-12-24 18:23:02 +00:00
if (m->m_len == 0)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
continue;
buf = IoAllocateMdl(m->m_data, m->m_len, FALSE, FALSE, NULL);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (buf == NULL) {
ndis_free_packet(*p);
*p = NULL;
return(ENOMEM);
}
if (priv->npp_head == NULL)
priv->npp_head = buf;
else
prev->mdl_next = buf;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
prev = buf;
}
priv->npp_tail = buf;
priv->npp_totlen = m0->m_pkthdr.len;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
int
ndis_get_supported_oids(arg, oids, oidcnt)
void *arg;
ndis_oid **oids;
int *oidcnt;
{
int len, rval;
ndis_oid *o;
if (arg == NULL || oids == NULL || oidcnt == NULL)
return(EINVAL);
len = 0;
ndis_get_info(arg, OID_GEN_SUPPORTED_LIST, NULL, &len);
o = malloc(len, M_DEVBUF, M_NOWAIT);
if (o == NULL)
return(ENOMEM);
rval = ndis_get_info(arg, OID_GEN_SUPPORTED_LIST, o, &len);
if (rval) {
free(o, M_DEVBUF);
return(rval);
}
*oids = o;
*oidcnt = len / 4;
return(0);
}
int
ndis_set_info(arg, oid, buf, buflen)
void *arg;
ndis_oid oid;
void *buf;
int *buflen;
{
struct ndis_softc *sc;
ndis_status rval;
ndis_handle adapter;
__stdcall ndis_setinfo_handler setfunc;
uint32_t byteswritten = 0, bytesneeded = 0;
int error;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t irql;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
sc = arg;
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
setfunc = sc->ndis_chars->nmc_setinfo_func;
adapter = sc->ndis_block->nmb_miniportadapterctx;
NDIS_UNLOCK(sc);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (adapter == NULL || setfunc == NULL)
return(ENXIO);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
KeAcquireSpinLock(&sc->ndis_block->nmb_lock, &irql);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
rval = MSCALL6(setfunc, adapter, oid, buf, *buflen,
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
&byteswritten, &bytesneeded);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
KeReleaseSpinLock(&sc->ndis_block->nmb_lock, irql);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (rval == NDIS_STATUS_PENDING) {
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
mtx_lock(&ndis_req_mtx);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
error = msleep(&sc->ndis_block->nmb_setstat,
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
&ndis_req_mtx,
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
curthread->td_priority|PDROP,
- The MiniportReset() function can return NDIS_STATUS_PENDING, in which case we should wait for the resetdone handler to be called before returning. - When providing resources via ndis_query_resources(), uses the computed rsclen when using bcopy() to copy out the resource data rather than the caller-supplied buffer length. - Avoid using ndis_reset_nic() in if_ndis.c unless we really need to reset the NIC because of a problem. - Allow interrupts to be fielded during ndis_attach(), at least as far as allowing ndis_isr() and ndis_intrhand() to run. - Use ndis_80211_rates_ex when probing for supported rates. Technically, this isn't supposed to work since, although Microsoft added the extended rate structure with the NDIS 5.1 update, the spec still says that the OID_802_11_SUPPORTED_RATES OID uses ndis_80211_rates. In spite of this, it appears some drivers use it anyway. - When adding in our guessed rates, check to see if they already exist so that we avoid any duplicates. - Add a printf() to ndis_open_file() that alerts the user when a driver attempts to open a file under /compat/ndis. With these changes, I can get the driver for the SMC 2802W 54g PCI card to load and run. This board uses a Prism54G chip. Note that in order for this driver to work, you must place the supplied smc2802w.arm firmware image under /compat/ndis. (The firmware is not resident on the device.) Note that this should also allow the 3Com 3CRWE154G72 card to work as well; as far as I can tell, these cards also use a Prism54G chip.
2004-04-05 08:26:52 +00:00
"ndisset", 5 * hz);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
rval = sc->ndis_block->nmb_setstat;
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (byteswritten)
*buflen = byteswritten;
if (bytesneeded)
*buflen = bytesneeded;
if (rval == NDIS_STATUS_INVALID_LENGTH)
return(ENOSPC);
if (rval == NDIS_STATUS_INVALID_OID)
return(EINVAL);
if (rval == NDIS_STATUS_NOT_SUPPORTED ||
rval == NDIS_STATUS_NOT_ACCEPTED)
return(ENOTSUP);
if (rval != NDIS_STATUS_SUCCESS)
return(ENODEV);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
typedef void (*ndis_senddone_func)(ndis_handle, ndis_packet *, ndis_status);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
int
ndis_send_packets(arg, packets, cnt)
void *arg;
ndis_packet **packets;
int cnt;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_sendmulti_handler sendfunc;
__stdcall ndis_senddone_func senddonefunc;
int i;
ndis_packet *p;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t irql;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
sc = arg;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
if (adapter == NULL)
return(ENXIO);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
sendfunc = sc->ndis_chars->nmc_sendmulti_func;
senddonefunc = sc->ndis_block->nmb_senddone_func;
irql = KeRaiseIrql(DISPATCH_LEVEL);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL3(sendfunc, adapter, packets, cnt);
KeLowerIrql(irql);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
for (i = 0; i < cnt; i++) {
p = packets[i];
/*
* Either the driver already handed the packet to
* ndis_txeof() due to a failure, or it wants to keep
* it and release it asynchronously later. Skip to the
* next one.
*/
if (p == NULL || p->np_oob.npo_status == NDIS_STATUS_PENDING)
continue;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL3(senddonefunc, sc->ndis_block, p, p->np_oob.npo_status);
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
int
ndis_send_packet(arg, packet)
void *arg;
ndis_packet *packet;
{
struct ndis_softc *sc;
ndis_handle adapter;
ndis_status status;
__stdcall ndis_sendsingle_handler sendfunc;
__stdcall ndis_senddone_func senddonefunc;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t irql;
sc = arg;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
if (adapter == NULL)
return(ENXIO);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
sendfunc = sc->ndis_chars->nmc_sendsingle_func;
senddonefunc = sc->ndis_block->nmb_senddone_func;
irql = KeRaiseIrql(DISPATCH_LEVEL);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
status = MSCALL3(sendfunc, adapter, packet,
packet->np_private.npp_flags);
KeLowerIrql(irql);
if (status == NDIS_STATUS_PENDING)
return(0);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL3(senddonefunc, sc->ndis_block, packet, status);
return(0);
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
int
ndis_init_dma(arg)
void *arg;
{
struct ndis_softc *sc;
int i, error;
sc = arg;
sc->ndis_tmaps = malloc(sizeof(bus_dmamap_t) * sc->ndis_maxpkts,
M_DEVBUF, M_NOWAIT|M_ZERO);
if (sc->ndis_tmaps == NULL)
return(ENOMEM);
for (i = 0; i < sc->ndis_maxpkts; i++) {
error = bus_dmamap_create(sc->ndis_ttag, 0,
&sc->ndis_tmaps[i]);
if (error) {
free(sc->ndis_tmaps, M_DEVBUF);
return(ENODEV);
}
}
return(0);
}
int
ndis_destroy_dma(arg)
void *arg;
{
struct ndis_softc *sc;
struct mbuf *m;
ndis_packet *p = NULL;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
int i;
sc = arg;
for (i = 0; i < sc->ndis_maxpkts; i++) {
if (sc->ndis_txarray[i] != NULL) {
p = sc->ndis_txarray[i];
m = (struct mbuf *)p->np_rsvd[1];
if (m != NULL)
m_freem(m);
ndis_free_packet(sc->ndis_txarray[i]);
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
bus_dmamap_destroy(sc->ndis_ttag, sc->ndis_tmaps[i]);
}
free(sc->ndis_tmaps, M_DEVBUF);
bus_dma_tag_destroy(sc->ndis_ttag);
return(0);
}
int
ndis_reset_nic(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_reset_handler resetfunc;
uint8_t addressing_reset;
struct ifnet *ifp;
- The MiniportReset() function can return NDIS_STATUS_PENDING, in which case we should wait for the resetdone handler to be called before returning. - When providing resources via ndis_query_resources(), uses the computed rsclen when using bcopy() to copy out the resource data rather than the caller-supplied buffer length. - Avoid using ndis_reset_nic() in if_ndis.c unless we really need to reset the NIC because of a problem. - Allow interrupts to be fielded during ndis_attach(), at least as far as allowing ndis_isr() and ndis_intrhand() to run. - Use ndis_80211_rates_ex when probing for supported rates. Technically, this isn't supposed to work since, although Microsoft added the extended rate structure with the NDIS 5.1 update, the spec still says that the OID_802_11_SUPPORTED_RATES OID uses ndis_80211_rates. In spite of this, it appears some drivers use it anyway. - When adding in our guessed rates, check to see if they already exist so that we avoid any duplicates. - Add a printf() to ndis_open_file() that alerts the user when a driver attempts to open a file under /compat/ndis. With these changes, I can get the driver for the SMC 2802W 54g PCI card to load and run. This board uses a Prism54G chip. Note that in order for this driver to work, you must place the supplied smc2802w.arm firmware image under /compat/ndis. (The firmware is not resident on the device.) Note that this should also allow the 3Com 3CRWE154G72 card to work as well; as far as I can tell, these cards also use a Prism54G chip.
2004-04-05 08:26:52 +00:00
int rval;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t irql;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
sc = arg;
ifp = &sc->arpcom.ac_if;
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
resetfunc = sc->ndis_chars->nmc_reset_func;
NDIS_UNLOCK(sc);
if (adapter == NULL || resetfunc == NULL)
return(EIO);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
irql = KeRaiseIrql(DISPATCH_LEVEL);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
rval = MSCALL2(resetfunc, &addressing_reset, adapter);
KeLowerIrql(irql);
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
- The MiniportReset() function can return NDIS_STATUS_PENDING, in which case we should wait for the resetdone handler to be called before returning. - When providing resources via ndis_query_resources(), uses the computed rsclen when using bcopy() to copy out the resource data rather than the caller-supplied buffer length. - Avoid using ndis_reset_nic() in if_ndis.c unless we really need to reset the NIC because of a problem. - Allow interrupts to be fielded during ndis_attach(), at least as far as allowing ndis_isr() and ndis_intrhand() to run. - Use ndis_80211_rates_ex when probing for supported rates. Technically, this isn't supposed to work since, although Microsoft added the extended rate structure with the NDIS 5.1 update, the spec still says that the OID_802_11_SUPPORTED_RATES OID uses ndis_80211_rates. In spite of this, it appears some drivers use it anyway. - When adding in our guessed rates, check to see if they already exist so that we avoid any duplicates. - Add a printf() to ndis_open_file() that alerts the user when a driver attempts to open a file under /compat/ndis. With these changes, I can get the driver for the SMC 2802W 54g PCI card to load and run. This board uses a Prism54G chip. Note that in order for this driver to work, you must place the supplied smc2802w.arm firmware image under /compat/ndis. (The firmware is not resident on the device.) Note that this should also allow the 3Com 3CRWE154G72 card to work as well; as far as I can tell, these cards also use a Prism54G chip.
2004-04-05 08:26:52 +00:00
if (rval == NDIS_STATUS_PENDING) {
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
mtx_lock(&ndis_req_mtx);
msleep(sc, &ndis_req_mtx,
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
curthread->td_priority|PDROP, "ndisrst", 0);
- The MiniportReset() function can return NDIS_STATUS_PENDING, in which case we should wait for the resetdone handler to be called before returning. - When providing resources via ndis_query_resources(), uses the computed rsclen when using bcopy() to copy out the resource data rather than the caller-supplied buffer length. - Avoid using ndis_reset_nic() in if_ndis.c unless we really need to reset the NIC because of a problem. - Allow interrupts to be fielded during ndis_attach(), at least as far as allowing ndis_isr() and ndis_intrhand() to run. - Use ndis_80211_rates_ex when probing for supported rates. Technically, this isn't supposed to work since, although Microsoft added the extended rate structure with the NDIS 5.1 update, the spec still says that the OID_802_11_SUPPORTED_RATES OID uses ndis_80211_rates. In spite of this, it appears some drivers use it anyway. - When adding in our guessed rates, check to see if they already exist so that we avoid any duplicates. - Add a printf() to ndis_open_file() that alerts the user when a driver attempts to open a file under /compat/ndis. With these changes, I can get the driver for the SMC 2802W 54g PCI card to load and run. This board uses a Prism54G chip. Note that in order for this driver to work, you must place the supplied smc2802w.arm firmware image under /compat/ndis. (The firmware is not resident on the device.) Note that this should also allow the 3Com 3CRWE154G72 card to work as well; as far as I can tell, these cards also use a Prism54G chip.
2004-04-05 08:26:52 +00:00
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
int
ndis_halt_nic(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_halt_handler haltfunc;
struct ifnet *ifp;
sc = arg;
ifp = &sc->arpcom.ac_if;
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
if (adapter == NULL) {
NDIS_UNLOCK(sc);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(EIO);
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/*
* The adapter context is only valid after the init
* handler has been called, and is invalid once the
* halt handler has been called.
*/
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
haltfunc = sc->ndis_chars->nmc_halt_func;
NDIS_UNLOCK(sc);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL1(haltfunc, adapter);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
sc->ndis_block->nmb_miniportadapterctx = NULL;
NDIS_UNLOCK(sc);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
int
ndis_shutdown_nic(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_shutdown_handler shutdownfunc;
sc = arg;
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
shutdownfunc = sc->ndis_chars->nmc_shutdown_handler;
NDIS_UNLOCK(sc);
if (adapter == NULL || shutdownfunc == NULL)
return(EIO);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
if (sc->ndis_chars->nmc_rsvd0 == NULL)
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL1(shutdownfunc, adapter);
else
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL1(shutdownfunc, sc->ndis_chars->nmc_rsvd0);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
ndis_shrink_thrqueue(8);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
TAILQ_REMOVE(&ndis_devhead, sc->ndis_block, link);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
int
ndis_init_nic(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_miniport_block *block;
__stdcall ndis_init_handler initfunc;
ndis_status status, openstatus = 0;
ndis_medium mediumarray[NdisMediumMax];
uint32_t chosenmedium, i;
if (arg == NULL)
return(EINVAL);
sc = arg;
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
block = sc->ndis_block;
initfunc = sc->ndis_chars->nmc_init_func;
NDIS_UNLOCK(sc);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
for (i = 0; i < NdisMediumMax; i++)
mediumarray[i] = i;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
status = MSCALL6(initfunc, &openstatus, &chosenmedium,
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
mediumarray, NdisMediumMax, block, block);
/*
* If the init fails, blow away the other exported routines
* we obtained from the driver so we can't call them later.
* If the init failed, none of these will work.
*/
if (status != NDIS_STATUS_SUCCESS) {
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
sc->ndis_block->nmb_miniportadapterctx = NULL;
NDIS_UNLOCK(sc);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(ENXIO);
}
return(0);
}
void
ndis_enable_intr(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_enable_interrupts_handler intrenbfunc;
sc = arg;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
intrenbfunc = sc->ndis_chars->nmc_enable_interrupts_func;
if (adapter == NULL || intrenbfunc == NULL)
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL1(intrenbfunc, adapter);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
}
void
ndis_disable_intr(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_disable_interrupts_handler intrdisfunc;
sc = arg;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
intrdisfunc = sc->ndis_chars->nmc_disable_interrupts_func;
if (adapter == NULL || intrdisfunc == NULL)
return;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL1(intrdisfunc, adapter);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return;
}
int
ndis_isr(arg, ourintr, callhandler)
void *arg;
int *ourintr;
int *callhandler;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_isr_handler isrfunc;
uint8_t accepted, queue;
if (arg == NULL || ourintr == NULL || callhandler == NULL)
return(EINVAL);
sc = arg;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
isrfunc = sc->ndis_chars->nmc_isr_func;
if (adapter == NULL || isrfunc == NULL)
return(ENXIO);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL3(isrfunc, &accepted, &queue, adapter);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
*ourintr = accepted;
*callhandler = queue;
return(0);
}
int
ndis_intrhand(arg)
void *arg;
{
struct ndis_softc *sc;
ndis_handle adapter;
__stdcall ndis_interrupt_handler intrfunc;
if (arg == NULL)
return(EINVAL);
sc = arg;
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
adapter = sc->ndis_block->nmb_miniportadapterctx;
intrfunc = sc->ndis_chars->nmc_interrupt_func;
NDIS_UNLOCK(sc);
if (adapter == NULL || intrfunc == NULL)
return(EINVAL);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
MSCALL1(intrfunc, adapter);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
int
ndis_get_info(arg, oid, buf, buflen)
void *arg;
ndis_oid oid;
void *buf;
int *buflen;
{
struct ndis_softc *sc;
ndis_status rval;
ndis_handle adapter;
__stdcall ndis_queryinfo_handler queryfunc;
uint32_t byteswritten = 0, bytesneeded = 0;
int error;
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
uint8_t irql;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
sc = arg;
NDIS_LOCK(sc);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
queryfunc = sc->ndis_chars->nmc_queryinfo_func;
adapter = sc->ndis_block->nmb_miniportadapterctx;
NDIS_UNLOCK(sc);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (adapter == NULL || queryfunc == NULL)
return(ENXIO);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
KeAcquireSpinLock(&sc->ndis_block->nmb_lock, &irql);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
rval = MSCALL6(queryfunc, adapter, oid, buf, *buflen,
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
&byteswritten, &bytesneeded);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
KeReleaseSpinLock(&sc->ndis_block->nmb_lock, irql);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/* Wait for requests that block. */
if (rval == NDIS_STATUS_PENDING) {
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
mtx_lock(&ndis_req_mtx);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
error = msleep(&sc->ndis_block->nmb_getstat,
Fix a problem reported by Pierre Beyssac. Sometinmes when ndis_get_info() calls MiniportQueryInformation(), it will return NDIS_STATUS_PENDING. When this happens, ndis_get_info() will sleep waiting for a completion event. If two threads call ndis_get_info() and both end up having to sleep, they will both end up waiting on the same wait channel, which can cause a panic in sleepq_add() if INVARIANTS are turned on. Fix this by having ndis_get_info() use a common mutex rather than using the process mutex with PROC_LOCK(). Also do the same for ndis_set_info(). Note that Pierre's original patch also made ndis_thsuspend() use the new mutex, but ndis_thsuspend() shouldn't need this since it will make each thread that calls it sleep on a unique wait channel. Also, it occured to me that we probably don't want to enter MiniportQueryInformation() or MiniportSetInformation() from more than one thread at any given time, so now we acquire a Windows spinlock before calling either of them. The Microsoft documentation says that MiniportQueryInformation() and MiniportSetInformation() are called at DISPATCH_LEVEL, and previously we would call KeRaiseIrql() to set the IRQL to DISPATCH_LEVEL before entering either routine, but this only guarantees mutual exclusion on uniprocessor machines. To make it SMP safe, we need to use a real spinlock. For now, I'm abusing the spinlock embedded in the NDIS_MINIPORT_BLOCK structure for this purpose. (This may need to be applied to some of the other routines in kern_ndis.c at a later date.) Export ntoskrnl_init_lock() (KeInitializeSpinlock()) from subr_ntoskrnl.c since we need to use in in kern_ndis.c, and since it's technically part of the Windows kernel DDK API along with the other spinlock routines. Use it in subr_ndis.c too rather than frobbing the spinlock directly.
2005-01-14 22:39:44 +00:00
&ndis_req_mtx,
Continue my efforts to imitate Windows as closely as possible by attempting to duplicate Windows spinlocks. Windows spinlocks differ from FreeBSD spinlocks in the way they block preemption. FreeBSD spinlocks use critical_enter(), which masks off _all_ interrupts. This prevents any other threads from being scheduled, but it also prevents ISRs from running. In Windows, preemption is achieved by raising the processor IRQL to DISPATCH_LEVEL, which prevents other threads from preempting you, but does _not_ prevent device ISRs from running. (This is essentially what Solaris calls dispatcher locks.) The Windows spinlock itself (kspin_lock) is just an integer value which is atomically set when you acquire the lock and atomically cleared when you release it. FreeBSD doesn't have IRQ levels, so we have to cheat a little by using thread priorities: normal thread priority is PASSIVE_LEVEL, lowest interrupt thread priority is DISPATCH_LEVEL, highest thread priority is DEVICE_LEVEL (PI_REALTIME) and critical_enter() is HIGH_LEVEL. In practice, only PASSIVE_LEVEL and DISPATCH_LEVEL matter to us. The immediate benefit of all this is that I no longer have to rely on a mutex pool. Now, I'm sure many people will be seized by the urge to criticize me for doing an end run around our own spinlock implementation, but it makes more sense to do it this way. Well, it does to me anyway. Overview of the changes: - Properly implement hal_lock(), hal_unlock(), hal_irql(), hal_raise_irql() and hal_lower_irql() so that they more closely resemble their Windows counterparts. The IRQL is determined by thread priority. - Make ntoskrnl_lock_dpc() and ntoskrnl_unlock_dpc() do what they do in Windows, which is to atomically set/clear the lock value. These routines are designed to be called from DISPATCH_LEVEL, and are actually half of the work involved in acquiring/releasing spinlocks. - Add FASTCALL1(), FASTCALL2() and FASTCALL3() macros/wrappers that allow us to call a _fastcall function in spite of the fact that our version of gcc doesn't support __attribute__((__fastcall__)) yet. The macros take 1, 2 or 3 arguments, respectively. We need to call hal_lock(), hal_unlock() etc... ourselves, but can't really invoke the function directly. I could have just made the underlying functions native routines and put _fastcall wrappers around them for the benefit of Windows binaries, but that would create needless bloat. - Remove ndis_mtxpool and all references to it. We don't need it anymore. - Re-implement the NdisSpinLock routines so that they use hal_lock() and friends like they do in Windows. - Use the new spinlock methods for handling lookaside lists and linked list updates in place of the mutex locks that were there before. - Remove mutex locking from ndis_isr() and ndis_intrhand() since they're already called with ndis_intrmtx held in if_ndis.c. - Put ndis_destroy_lock() code under explicit #ifdef notdef/#endif. It turns out there are some drivers which stupidly free the memory in which their spinlocks reside before calling ndis_destroy_lock() on them (touch-after-free bug). The ADMtek wireless driver is guilty of this faux pas. (Why this doesn't clobber Windows I have no idea.) - Make NdisDprAcquireSpinLock() and NdisDprReleaseSpinLock() into real functions instead of aliasing them to NdisAcaquireSpinLock() and NdisReleaseSpinLock(). The Dpr routines use KeAcquireSpinLockAtDpcLevel() level and KeReleaseSpinLockFromDpcLevel(), which acquires the lock without twiddling the IRQL. - In ndis_linksts_done(), do _not_ call ndis_80211_getstate(). Some drivers may call the status/status done callbacks as the result of setting an OID: ndis_80211_getstate() gets OIDs, which means we might cause the driver to recursively access some of its internal structures unexpectedly. The ndis_ticktask() routine will call ndis_80211_getstate() for us eventually anyway. - Fix the channel setting code a little in ndis_80211_setstate(), and initialize the channel to IEEE80211_CHAN_ANYC. (The Microsoft spec says you're not supposed to twiddle the channel in BSS mode; I may need to enforce this later.) This fixes the problems I was having with the ADMtek adm8211 driver: we were setting the channel to a non-standard default, which would cause it to fail to associate in BSS mode. - Use hal_raise_irql() to raise our IRQL to DISPATCH_LEVEL when calling certain miniport routines, per the Microsoft documentation. I think that's everything. Hopefully, other than fixing the ADMtek driver, there should be no apparent change in behavior.
2004-04-14 07:48:03 +00:00
curthread->td_priority|PDROP,
- The MiniportReset() function can return NDIS_STATUS_PENDING, in which case we should wait for the resetdone handler to be called before returning. - When providing resources via ndis_query_resources(), uses the computed rsclen when using bcopy() to copy out the resource data rather than the caller-supplied buffer length. - Avoid using ndis_reset_nic() in if_ndis.c unless we really need to reset the NIC because of a problem. - Allow interrupts to be fielded during ndis_attach(), at least as far as allowing ndis_isr() and ndis_intrhand() to run. - Use ndis_80211_rates_ex when probing for supported rates. Technically, this isn't supposed to work since, although Microsoft added the extended rate structure with the NDIS 5.1 update, the spec still says that the OID_802_11_SUPPORTED_RATES OID uses ndis_80211_rates. In spite of this, it appears some drivers use it anyway. - When adding in our guessed rates, check to see if they already exist so that we avoid any duplicates. - Add a printf() to ndis_open_file() that alerts the user when a driver attempts to open a file under /compat/ndis. With these changes, I can get the driver for the SMC 2802W 54g PCI card to load and run. This board uses a Prism54G chip. Note that in order for this driver to work, you must place the supplied smc2802w.arm firmware image under /compat/ndis. (The firmware is not resident on the device.) Note that this should also allow the 3Com 3CRWE154G72 card to work as well; as far as I can tell, these cards also use a Prism54G chip.
2004-04-05 08:26:52 +00:00
"ndisget", 5 * hz);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
rval = sc->ndis_block->nmb_getstat;
}
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
if (byteswritten)
*buflen = byteswritten;
if (bytesneeded)
*buflen = bytesneeded;
if (rval == NDIS_STATUS_INVALID_LENGTH ||
rval == NDIS_STATUS_BUFFER_TOO_SHORT)
return(ENOSPC);
if (rval == NDIS_STATUS_INVALID_OID)
return(EINVAL);
if (rval == NDIS_STATUS_NOT_SUPPORTED ||
rval == NDIS_STATUS_NOT_ACCEPTED)
return(ENOTSUP);
if (rval != NDIS_STATUS_SUCCESS)
return(ENODEV);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
__stdcall uint32_t
NdisAddDevice(drv, pdo)
driver_object *drv;
device_object *pdo;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
{
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
device_object *fdo;
ndis_miniport_block *block;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
struct ndis_softc *sc;
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
uint32_t status;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
status = IoCreateDevice(drv, sizeof(ndis_miniport_block), NULL,
FILE_DEVICE_UNKNOWN, 0, FALSE, &fdo);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
if (status != STATUS_SUCCESS)
return(status);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
block = fdo->do_devext;
block->nmb_deviceobj = fdo;
block->nmb_physdeviceobj = pdo;
block->nmb_nextdeviceobj = IoAttachDeviceToDeviceStack(fdo, pdo);
KeInitializeSpinLock(&block->nmb_lock);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
/*
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
* Stash pointers to the miniport block and miniport
* characteristics info in the if_ndis softc so the
* UNIX wrapper driver can get to them later.
*/
sc = device_get_softc(pdo->do_devext);
sc->ndis_block = block;
sc->ndis_chars = IoGetDriverObjectExtension(drv, (void *)1);
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
/* Finish up BSD-specific setup. */
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
block->nmb_signature = (void *)0xcafebabe;
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
block->nmb_status_func = kernndis_functbl[0].ipt_wrap;
block->nmb_statusdone_func = kernndis_functbl[1].ipt_wrap;
block->nmb_setdone_func = kernndis_functbl[2].ipt_wrap;
block->nmb_querydone_func = kernndis_functbl[3].ipt_wrap;
block->nmb_resetdone_func = kernndis_functbl[4].ipt_wrap;
block->nmb_sendrsrc_func = kernndis_functbl[5].ipt_wrap;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
ndis_enlarge_thrqueue(8);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
TAILQ_INSERT_TAIL(&ndis_devhead, block, link);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
return (STATUS_SUCCESS);
}
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
int
ndis_unload_driver(arg)
void *arg;
{
struct ndis_softc *sc;
device_object *fdo;
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
sc = arg;
if (sc->ndis_block->nmb_rlist != NULL)
free(sc->ndis_block->nmb_rlist, M_DEVBUF);
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
ndis_flush_sysctls(sc);
ndis_shrink_thrqueue(8);
TAILQ_REMOVE(&ndis_devhead, sc->ndis_block, link);
fdo = sc->ndis_block->nmb_deviceobj;
IoDetachDevice(sc->ndis_block->nmb_nextdeviceobj);
IoDeleteDevice(fdo);
Commit the first cut of Project Evil, also known as the NDISulator. Yes, it's what you think it is. Yes, you should run away now. This is a special compatibility module for allowing Windows NDIS miniport network drivers to be used with FreeBSD/x86. This provides _binary_ NDIS compatibility (not source): you can run NDIS driver code, but you can't build it. There are three main parts: sys/compat/ndis: the NDIS compat API, which provides binary compatibility functions for many routines in NDIS.SYS, HAL.dll and ntoskrnl.exe in Windows (these are the three modules that most NDIS miniport drivers use). The compat module also contains a small PE relocator/dynalinker which relocates the Windows .SYS image and then patches in our native routines. sys/dev/if_ndis: the if_ndis driver wrapper. This module makes use of the ndis compat API and can be compiled with a specially prepared binary image file (ndis_driver_data.h) containing the Windows .SYS image and registry key information parsed out of the accompanying .INF file. Once if_ndis.ko is built, it can be loaded and unloaded just like a native FreeBSD kenrel module. usr.sbin/ndiscvt: a special utility that converts foo.sys and foo.inf into an ndis_driver_data.h file that can be compiled into if_ndis.o. Contains an .inf file parser graciously provided by Matt Dodd (and mercilessly hacked upon by me) that strips out device ID info and registry key info from a .INF file and packages it up with a binary image array. The ndiscvt(8) utility also does some manipulation of the segments within the .sys file to make life easier for the kernel loader. (Doing the manipulation here saves the kernel code from having to move things around later, which would waste memory.) ndiscvt is only built for the i386 arch. Only files.i386 has been updated, and none of this is turned on in GENERIC. It should probably work on pc98. I have no idea about amd64 or ia64 at this point. This is still a work in progress. I estimate it's about %85 done, but I want it under CVS control so I can track subsequent changes. It has been tested with exactly three drivers: the LinkSys LNE100TX v4 driver (Lne100v4.sys), the sample Intel 82559 driver from the Windows DDK (e100bex.sys) and the Broadcom BCM43xx wireless driver (bcmwl5.sys). It still needs to have a net80211 stuff added to it. To use it, you would do something like this: # cd /sys/modules/ndis # make; make load # cd /sys/modules/if_ndis # ndiscvt -i /path/to/foo.inf -s /path/to/foo.sys -o ndis_driver_data.h # make; make load # sysctl -a | grep ndis All registry keys are mapped to sysctl nodes. Sometimes drivers refer to registry keys that aren't mentioned in foo.inf. If this happens, the NDIS API module creates sysctl nodes for these keys on the fly so you can tweak them. An example usage of the Broadcom wireless driver would be: # sysctl hw.ndis0.EnableAutoConnect=1 # sysctl hw.ndis0.SSID="MY_SSID" # sysctl hw.ndis0.NetworkType=0 (0 for bss, 1 for adhoc) # ifconfig ndis0 <my ipaddr> netmask 0xffffff00 up Things to be done: - get rid of debug messages - add in ndis80211 support - defer transmissions until after a status update with NDIS_STATUS_CONNECTED occurs - Create smarter lookaside list support - Split off if_ndis_pci.c and if_ndis_pccard.c attachments - Make sure PCMCIA support works - Fix ndiscvt to properly parse PCMCIA device IDs from INF files - write ndisapi.9 man page
2003-12-11 22:34:37 +00:00
return(0);
}