freebsd-nq/share/mk/src.opts.mk

512 lines
11 KiB
Makefile
Raw Normal View History

# $FreeBSD$
#
# Option file for FreeBSD /usr/src builds.
#
# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf
# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no}
# with sensible (usually) defaults.
#
# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that
# are applicable for that Makefile (typically there are none, but sometimes there
# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish
# to omit from that make.
#
# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO
# variable.
#
# Makefiles may also assume that this file is included by src.opts.mk should it
# need variables defined there prior to the end of the Makefile where
# bsd.{subdir,lib.bin}.mk is traditionally included.
#
# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them
# should be added. Old instances should be removed since they were just to
# bridge the gap between FreeBSD 4 and FreeBSD 5.
#
# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an
# exception is made for _WITHOUT_SRCONF which turns off this mechanism
# completely inside bsd.*.mk files).
#
.if !target(__<src.opts.mk>__)
__<src.opts.mk>__:
.include <bsd.own.mk>
#
# Define MK_* variables (which are either "yes" or "no") for users
# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the
# make(1) environment.
# These should be tested with `== "no"' or `!= "no"' in makefiles.
# The NO_* variables should only be set by makefiles for variables
# that haven't been converted over.
#
# These options are used by the src builds. Those listed in
# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned
# off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build
# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be
# hard-wired to 'no'. "Broken" here means not working or
# not-appropriate and/or not supported. It doesn't imply something is
# wrong with the code. There's not a single good word for this, so
# BROKEN was selected as the least imperfect one considered at the
# time. Options are added to BROKEN_OPTIONS list on a per-arch basis.
# At this time, there's no provision for mutually incompatible options.
__DEFAULT_YES_OPTIONS = \
ACCT \
ACPI \
APM \
AT \
ATM \
AUDIT \
AUTHPF \
AUTOFS \
BHYVE \
BLACKLIST \
BLUETOOTH \
BOOT \
BOOTPARAMD \
BOOTPD \
BSD_CPIO \
BSDINSTALL \
BSNMP \
BZIP2 \
CALENDAR \
CAPSICUM \
CAROOT \
CASPER \
CCD \
CDDL \
CLANG \
CLANG_BOOTSTRAP \
CLANG_IS_CC \
CLEAN \
CPP \
CROSS_COMPILER \
CRYPT \
CUSE \
CXX \
CXGBETOOL \
DIALOG \
DICT \
DMAGENT \
DYNAMICROOT \
EE \
EFI \
ELFTOOLCHAIN_BOOTSTRAP \
EXAMPLES \
FDT \
FILE \
FINGER \
FLOPPY \
FMTREE \
FORTH \
FP_LIBC \
FREEBSD_UPDATE \
FTP \
GAMES \
Import new 2-clause BSD licenced implementation of the bc and dc commands These implementations of the bc and dc programs offer a number of advantages compared to the current implementations in the FreeBSD base system: - They do not depend on external large number functions (i.e. no dependency on OpenSSL or any other large number library) - They implements all features found in GNU bc/dc (with the exception of the forking of sub-processes, which the author of this version considers as a security issue). - They are significantly faster than the current code in base (more than 2 orders of magnitude in some of my tests, e.g. for 12345^100000). - They should be fully compatible with all features and the behavior of the current implementations in FreeBSD (not formally verified). - They support POSIX message catalogs and come with localized messages in Chinese, Dutch, English, French, German, Japanese, Polish, Portugueze, and Russian. - They offer very detailed man-pages that provide far more information than the current ones. The upstream sources contain a large number of tests, which are not imported with this commit. They could be integrated into our test framework at a latter time. Installation of this version is controlled by the option "MK_GH_BC=yes". This option will be set to yes by default in 13-CURRENT, but will be off by default in 12-STABLE. Approved by: imp Obtained from: https://git.yzena.com/gavin/bc MFC after: 4 weeks Relnotes: yes Differential Revision: https://reviews.freebsd.org/D19982
2020-06-27 12:02:01 +00:00
GH_BC \
GNU_DIFF \
GOOGLETEST \
GPIO \
HAST \
HTML \
HYPERV \
ICONV \
INET \
INET6 \
INETD \
IPFILTER \
IPFW \
ISCSI \
JAIL \
KDUMP \
KVM \
LDNS \
LDNS_UTILS \
LEGACY_CONSOLE \
LLD \
LLD_BOOTSTRAP \
LLD_IS_LD \
LLVM_ASSERTIONS \
LLVM_COV \
LLVM_CXXFILT \
LLVM_TARGET_ALL \
LOADER_GELI \
LOADER_LUA \
LOADER_OFW \
LOADER_UBOOT \
LOCALES \
LOCATE \
LPR \
LS_COLORS \
LZMA_SUPPORT \
MAIL \
MAILWRAPPER \
MAKE \
MLX5TOOL \
NDIS \
NETCAT \
NETGRAPH \
NLS_CATALOGS \
NS_CACHING \
NTP \
NVME \
OFED \
OPENSSL \
PAM \
PF \
PKGBOOTSTRAP \
PMC \
PORTSNAP \
PPP \
QUOTAS \
RADIUS_SUPPORT \
RBOOTD \
RESCUE \
ROUTED \
SENDMAIL \
SERVICESDB \
SETUID_LOGIN \
SHARED_TOOLCHAIN \
SHAREDOCS \
SOURCELESS \
SOURCELESS_HOST \
SOURCELESS_UCODE \
STATS \
SVNLITE \
SYSCONS \
SYSTEM_COMPILER \
SYSTEM_LINKER \
TALK \
TCP_WRAPPERS \
TCSH \
TELNET \
TEXTPROC \
TFTP \
UNBOUND \
USB \
UTMPX \
VI \
VT \
WIRELESS \
WPA_SUPPLICANT_EAPOL \
ZFS \
LOADER_ZFS \
ZONEINFO
__DEFAULT_NO_OPTIONS = \
BEARSSL \
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
BHYVE_SNAPSHOT \
CLANG_EXTRAS \
CLANG_FORMAT \
DTRACE_TESTS \
EXPERIMENTAL \
HESIOD \
LIBSOFT \
LOADER_FIREWIRE \
LOADER_VERBOSE \
LOADER_VERIEXEC_PASS_MANIFEST \
MALLOC_PRODUCTION \
OFED_EXTRA \
OPENLDAP \
REPRODUCIBLE_BUILD \
RPCBIND_WARMSTART_SUPPORT \
SORT_THREADS \
Opportunistically skip building a cross-compiler with SYSTEM_COMPILER set. This will still build the compiler for the target but will not build the bootstrap cross-compiler in the cross-tools phase. Other toolchain bootstrapping, such as elftoolchan and binutils, currently still occurs. This will utilize the default CC (cc, /usr/bin/cc) as an external compiler. This is planned to be on-by-default eventually. This will utilize the __FreeBSD_cc_version compiler macro defined in the source tree and compare it to CC's version. If they match then the cross-compiler is skipped. If [X]CC is an external compiler (absolute path) or WITHOUT_CROSS_COMPILER is already set, then this logic is skipped. If the expected bootstrap compiler type no longer matches the found CC compiler type (clang vs gcc), then the logic is skipped. As an extra safety check the version number is also compared from the compiler to the tree version. Clang: The macro FREEBSD_CC_VERSION is defined in: lib/clang/include/clang/Basic/Version.inc For clang -target will be used if TARGET_ARCH != MACHINE_ARCH. This is from the current external toolchain logic. There is currently an assumption that the host compiler can build the TARGET_ARCH. This will usually be the case since we don't conditionalize target arch support in clang, but it will break when introducing new architectures. This problem is mitigated by incrementing the version when adding new architectures. GCC: The macro FBSD_CC_VER is defined in: gnu/usr.bin/cc/cc_tools/freebsd-native.h For GCC there is no simple -target support when TARGET_ARCH != MACHINE_ARCH. In this case the opportunistic skip is not done. If we add proper support for this case in external toolchain logic then it will be fine to enable. This relies on the macros being incremented whenever any change occurs to these compilers that warrant rebuilding files. It also should never repeat earlier values. Reviewed by: brooks, bapt, imp Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D6357
2016-05-21 01:32:23 +00:00
SVN \
ZONEINFO_LEAPSECONDS_SUPPORT \
Opportunistically skip building a cross-compiler with SYSTEM_COMPILER set. This will still build the compiler for the target but will not build the bootstrap cross-compiler in the cross-tools phase. Other toolchain bootstrapping, such as elftoolchan and binutils, currently still occurs. This will utilize the default CC (cc, /usr/bin/cc) as an external compiler. This is planned to be on-by-default eventually. This will utilize the __FreeBSD_cc_version compiler macro defined in the source tree and compare it to CC's version. If they match then the cross-compiler is skipped. If [X]CC is an external compiler (absolute path) or WITHOUT_CROSS_COMPILER is already set, then this logic is skipped. If the expected bootstrap compiler type no longer matches the found CC compiler type (clang vs gcc), then the logic is skipped. As an extra safety check the version number is also compared from the compiler to the tree version. Clang: The macro FREEBSD_CC_VERSION is defined in: lib/clang/include/clang/Basic/Version.inc For clang -target will be used if TARGET_ARCH != MACHINE_ARCH. This is from the current external toolchain logic. There is currently an assumption that the host compiler can build the TARGET_ARCH. This will usually be the case since we don't conditionalize target arch support in clang, but it will break when introducing new architectures. This problem is mitigated by incrementing the version when adding new architectures. GCC: The macro FBSD_CC_VER is defined in: gnu/usr.bin/cc/cc_tools/freebsd-native.h For GCC there is no simple -target support when TARGET_ARCH != MACHINE_ARCH. In this case the opportunistic skip is not done. If we add proper support for this case in external toolchain logic then it will be fine to enable. This relies on the macros being incremented whenever any change occurs to these compilers that warrant rebuilding files. It also should never repeat earlier values. Reviewed by: brooks, bapt, imp Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D6357
2016-05-21 01:32:23 +00:00
# LEFT/RIGHT. Left options which default to "yes" unless their corresponding
# RIGHT option is disabled.
__DEFAULT_DEPENDENT_OPTIONS= \
CLANG_FULL/CLANG \
LOADER_VERIEXEC/BEARSSL \
LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \
LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \
VERIEXEC/BEARSSL \
# MK_*_SUPPORT options which default to "yes" unless their corresponding
# MK_* variable is set to "no".
#
.for var in \
BLACKLIST \
BZIP2 \
INET \
INET6 \
KERBEROS \
KVM \
NETGRAPH \
PAM \
TESTS \
WIRELESS
__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var}
.endfor
#
# Default behaviour of some options depends on the architecture. Unfortunately
# this means that we have to test TARGET_ARCH (the buildworld case) as well
# as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not
# used at all in bsd.*.mk, but we have to make an exception here if we want
# to allow defaults for some things like clang to vary by target architecture.
# Additional, per-target behavior should be rarely added only after much
# gnashing of teeth and grinding of gears.
#
.if defined(TARGET_ARCH)
__T=${TARGET_ARCH}
.else
__T=${MACHINE_ARCH}
.endif
# All supported backends for LLVM_TARGET_XXX
__LLVM_TARGETS= \
aarch64 \
arm \
mips \
powerpc \
riscv \
x86
__LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/:C/mips.*/mips/
.for __llt in ${__LLVM_TARGETS}
# Default enable the given TARGET's LLVM_TARGET support
.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt}
__DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}
# aarch64 needs arm for -m32 support.
.elif ${__T} == "aarch64" && ${__llt:Marm*} != ""
__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64
# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL.
.else
__DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL
.endif
.endfor
__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF
.include <bsd.compiler.mk>
.if ${__T:Mriscv*} != ""
BROKEN_OPTIONS+=OFED
.endif
.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386"
__DEFAULT_YES_OPTIONS+=LLDB
.else
__DEFAULT_NO_OPTIONS+=LLDB
.endif
# LIB32 is supported on amd64, mips64, and powerpc64
.if (${__T} == "amd64" || ${__T:Mmips64*} || ${__T} == "powerpc64")
__DEFAULT_YES_OPTIONS+=LIB32
.else
BROKEN_OPTIONS+=LIB32
.endif
# Only doing soft float API stuff on armv6 and armv7
.if ${__T} != "armv6" && ${__T} != "armv7"
BROKEN_OPTIONS+=LIBSOFT
.endif
2016-09-29 13:38:14 +00:00
.if ${__T:Mmips*}
# GOOGLETEST cannot currently be compiled on mips due to external circumstances.
# Notably, the freebsd-gcc port isn't linking in libgcc so we end up trying ot
# link to a hidden symbol. LLVM would successfully link this in, but some of
# the mips variants are broken under LLVM until LLVM 10. GOOGLETEST should be
# marked no longer broken with the switch to LLVM.
BROKEN_OPTIONS+=GOOGLETEST SSP
.endif
# EFI doesn't exist on mips or powerpc.
.if ${__T:Mmips*} || ${__T:Mpowerpc*}
BROKEN_OPTIONS+=EFI
.endif
# OFW is only for powerpc, exclude others
.if ${__T:Mpowerpc*} == ""
BROKEN_OPTIONS+=LOADER_OFW
.endif
# UBOOT is only for arm, mips and powerpc, exclude others
.if ${__T:Marm*} == "" && ${__T:Mmips*} == "" && ${__T:Mpowerpc*} == ""
BROKEN_OPTIONS+=LOADER_UBOOT
.endif
# GELI and Lua in loader currently cause boot failures on powerpc.
# Further debugging is required -- probably they are just broken on big
# endian systems generically (they jump to null pointers or try to read
# crazy high addresses, which is typical of endianness problems).
.if ${__T:Mpowerpc*}
BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA
.endif
# Kernel TLS is enabled by default on amd64 and aarch64
.if ${__T} == "aarch64" || ${__T} == "amd64"
__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS
.else
__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS
.endif
.if ${__T:Mmips64*}
# profiling won't work on MIPS64 because there is only assembly for o32
BROKEN_OPTIONS+=PROFILE
.endif
.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \
${__T} != "powerpc64"
BROKEN_OPTIONS+=CXGBETOOL
BROKEN_OPTIONS+=MLX5TOOL
.endif
# HyperV is currently x86-only
.if ${__T} != "amd64" && ${__T} != "i386"
BROKEN_OPTIONS+=HYPERV
.endif
# NVME is only aarch64, x86 and powerpc64*
.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \
${__T:Mpowerpc64*} == ""
BROKEN_OPTIONS+=NVME
.endif
.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \
${__T:Mpowerpc64*} != ""
__DEFAULT_YES_OPTIONS+=OPENMP
.else
__DEFAULT_NO_OPTIONS+=OPENMP
.endif
.if ${.MAKE.OS} != "FreeBSD"
# Building the target compiler requires building tablegen on the host
# which is (currently) not possible on non-FreeBSD.
BROKEN_OPTIONS+=CLANG LLD LLDB
# The same also applies to the bootstrap LLVM.
BROKEN_OPTIONS+=CLANG_BOOTSTRAP LLD_BOOTSTRAP
.endif
.include <bsd.mkopt.mk>
#
# Force some options off if their dependencies are off.
# Order is somewhat important.
#
.if ${MK_CAPSICUM} == "no"
MK_CASPER:= no
.endif
.if ${MK_SOURCELESS} == "no"
MK_SOURCELESS_HOST:= no
MK_SOURCELESS_UCODE:= no
.endif
.if ${MK_CDDL} == "no"
MK_ZFS:= no
MK_LOADER_ZFS:= no
MK_CTF:= no
.endif
.if ${MK_CRYPT} == "no"
MK_OPENSSL:= no
MK_OPENSSH:= no
MK_KERBEROS:= no
MK_KERBEROS_SUPPORT:= no
.endif
.if ${MK_CXX} == "no"
MK_CLANG:= no
MK_GOOGLETEST:= no
MK_TESTS:= no
.endif
.if ${MK_DIALOG} == "no"
MK_BSDINSTALL:= no
.endif
.if ${MK_FILE} == "no"
MK_SVNLITE:= no
.endif
.if ${MK_MAIL} == "no"
MK_MAILWRAPPER:= no
MK_SENDMAIL:= no
MK_DMAGENT:= no
.endif
.if ${MK_NETGRAPH} == "no"
MK_ATM:= no
MK_BLUETOOTH:= no
.endif
.if ${MK_NLS} == "no"
MK_NLS_CATALOGS:= no
.endif
.if ${MK_OPENSSL} == "no"
MK_DMAGENT:= no
MK_OPENSSH:= no
MK_KERBEROS:= no
MK_KERBEROS_SUPPORT:= no
MK_LDNS:= no
MK_PKGBOOTSTRAP:= no
MK_SVN:= no
MK_SVNLITE:= no
.endif
.if ${MK_LDNS} == "no"
MK_LDNS_UTILS:= no
MK_UNBOUND:= no
.endif
.if ${MK_PF} == "no"
MK_AUTHPF:= no
.endif
.if ${MK_OFED} == "no"
MK_OFED_EXTRA:= no
.endif
.if ${MK_TESTS} == "no"
MK_DTRACE_TESTS:= no
.endif
.if ${MK_TESTS_SUPPORT} == "no"
MK_GOOGLETEST:= no
.endif
.if ${MK_ZONEINFO} == "no"
MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no
.endif
.if ${MK_CROSS_COMPILER} == "no"
MK_CLANG_BOOTSTRAP:= no
MK_ELFTOOLCHAIN_BOOTSTRAP:= no
MK_LLD_BOOTSTRAP:= no
.endif
.if ${MK_TOOLCHAIN} == "no"
MK_CLANG:= no
MK_INCLUDES:= no
MK_LLD:= no
MK_LLDB:= no
.endif
.if ${MK_CLANG} == "no"
MK_CLANG_EXTRAS:= no
MK_CLANG_FORMAT:= no
MK_CLANG_FULL:= no
MK_LLVM_COV:= no
.endif
.if ${MK_LOADER_VERIEXEC} == "no"
MK_LOADER_VERIEXEC_PASS_MANIFEST := no
.endif
#
# MK_* options whose default value depends on another option.
#
.for vv in \
GSSAPI/KERBEROS \
MAN_UTILS/MAN
.if defined(WITH_${vv:H})
MK_${vv:H}:= yes
.elif defined(WITHOUT_${vv:H})
MK_${vv:H}:= no
.else
MK_${vv:H}:= ${MK_${vv:T}}
.endif
.endfor
#
# Set defaults for the MK_*_SUPPORT variables.
#
.endif # !target(__<src.opts.mk>__)