freebsd-nq/sys/modules/wi/Makefile

# $FreeBSD$

.PATH: ${.CURDIR}/../../dev/wi

KMOD=	if_wi
SRCS=	opt_wi.h if_wi.c if_wi_pccard.c if_wi_pci.c \
	card_if.h device_if.h bus_if.h pci_if.h

opt_wi.h:
	echo "#define WI_SYMBOL_FIRMWARE 1" > ${.TARGET}

.include <bsd.kmod.mk>
Update the WaveLAN/IEEE driver: - Convert to new bus attachment scheme. Thanks to Blaz Zupan for doing the initial work here. One thing I changed was to have the attach and detach routines work like the PCI drivers, which means that in theory you should be able to load and unload the driver like the PCI NIC drivers, however the pccard support for this hasn't settled down yet so it doesn't quite work. Once the pccard work is done, I'll have to revisit this. - Add device wi0 to PCCARD. If we're lucky, people should be able to install via their WaveLAN cards now. - Add support for signal strength caching. The wicontrol utility has also been updated to allow zeroing and displaying the signal strength cache. - Add a /sys/modules/wi directory and fix a Makefile to builf if_wi.ko. Currently this module is only built for the i386 platform, though once the pccard stuff is done it should be able to work on the alpha too. (Theoretically you should be able to plug one of the WaveLAN/IEEE ISA cards into an alpha with an ISA slot, but we'll see how that turns out. - Update LINT to use only device wi0. There is no true ISA version of the WaveLAN/IEEE so we'll never use an ISA attachment. - Update files.i386 so that if_wi is dependent on card. 1999-11-25 20:45:49 +00:00			`# $FreeBSD$`

Note new location of wi driver source code. 2001-01-09 04:29:29 +00:00			`.PATH: ${.CURDIR}/../../dev/wi`
Use a consistent style and one much closer to the rest of /usr/src 2001-01-06 14:00:42 +00:00
			`KMOD= if_wi`
remove wi-specific host ap code; the wi driver now depends on the wlan module for 802.11 core support 2003-01-15 20:13:30 +00:00			`SRCS= opt_wi.h if_wi.c if_wi_pccard.c if_wi_pci.c \`
First cut at breaking out the bus attachment from the bus independent part of the driver. Also, move the softc and some other stuff to if_wivar.h from if_wireg.h to make future merging activities easier. 2002-04-02 02:38:35 +00:00			`card_if.h device_if.h bus_if.h pci_if.h`
Update the WaveLAN/IEEE driver: - Convert to new bus attachment scheme. Thanks to Blaz Zupan for doing the initial work here. One thing I changed was to have the attach and detach routines work like the PCI drivers, which means that in theory you should be able to load and unload the driver like the PCI NIC drivers, however the pccard support for this hasn't settled down yet so it doesn't quite work. Once the pccard work is done, I'll have to revisit this. - Add device wi0 to PCCARD. If we're lucky, people should be able to install via their WaveLAN cards now. - Add support for signal strength caching. The wicontrol utility has also been updated to allow zeroing and displaying the signal strength cache. - Add a /sys/modules/wi directory and fix a Makefile to builf if_wi.ko. Currently this module is only built for the i386 platform, though once the pccard stuff is done it should be able to work on the alpha too. (Theoretically you should be able to plug one of the WaveLAN/IEEE ISA cards into an alpha with an ISA slot, but we'll see how that turns out. - Update LINT to use only device wi0. There is no true ISA version of the WaveLAN/IEEE so we'll never use an ISA attachment. - Update files.i386 so that if_wi is dependent on card. 1999-11-25 20:45:49 +00:00
We now have opt_wi.h, so go ahead and add it. Default it to 1. 2002-08-03 00:21:29 +00:00			`opt_wi.h:`
			`echo "#define WI_SYMBOL_FIRMWARE 1" > ${.TARGET}`

Use .include <bsd.kmod.mk> to get to ../../*/conf/kmod.mk instead of encoding the relative path. 2000-05-27 01:14:33 +00:00			`.include <bsd.kmod.mk>`